Comparison of the Thermoresponsive Deswelling Kinetics of Poly(2-(2-methoxyethoxy)ethyl methacrylate) Hydrogels Prepared by ATRP and FRP

Comparison of gels synthesized by controlled radical copolymerization and free radical copolymerization: molecular dynamics simulation

The structures of gels synthesized by controlled radical copolymerization (CRP) and conventional free radical copolymerization (FRP) were studied by a coarse-grained molecular dynamics simulation. It was confirmed that the CRP gel has a larger number of elastically effective chains and fewer cyclic structures and entanglements than the FRP gel, i.e., the network structure of the CRP gel is more uniform than that of the FRP gel. However, the difference in the shear modulus between the two gels was small due to the opposing changes in the number of elastically effective chains and that of entanglements. The relatively uniform structure of the CRP gel is attributed to the suppression of intramolecular cross-linking by the fast initiation and slow propagation, and the development of cross-linked structures in the post-gel region due to the limited termination. The effects of these CRP characteristics were studied in detail. From the results, it was found that all of these characteristics of CRP cooperatively act to improve the homogeneity of the structure of the CRP gel.

An Investigation of the Sol-Gel Transition of Chitosan Lactate and Chitosan Chloride Solutions via Rheological and NMR Studies

In recent years, intensive research has been carried out on the use of hydrogels obtained from natural polymers, mainly chitosan. These products are increasingly replacing solutions based on synthetic materials in medicine. This publication presents the results of studies on the sol-gel transition of chitosan solutions as the base material for the preparation of thermosensitive hydrogels for potential applications in tissue engineering. The measurements were carried out for systems consisting of chitosan lactate and chitosan chloride solutions using β-glycerol phosphate disodium salt pentahydrate and uridine 5′-monophosphate disodium salt as the cross-linking agents. The sol-gel transition point of the solutions was determined based on the rheological measurements in the cone-plate configuration of the rotational rheometer and experiments performed using the method of nuclear magnetic resonance. The obtained results showed a significant influence of the cross-linking agent on the course of the sol-gel transition of chitosan salt solutions, and the systems that consisted of chitosan lactate seemed to be especially interesting for biomedical applications.

Stimuli-responsive destructible polymeric hydrogels based on irreversible covalent bond dissociation

Covalently crosslinked stimuli-destructible hydrogels with the ability of irreversible bond dissociation have attracted great attentions due to their biodegradability, stability against hydrolysis, and controlled solubility upon insertion of desired triggers.

Living Polymer Networks Prepared by Controlled Radical Polymerization Techniques

Controlled radical polymerization (CRP) techniques have become widely accepted and used in polymer research and development. While much has been done towards their traditional usage in linear and branched systems,...

Determination of dopamine based on a temperature-sensitive PMEO2MA and Au@rGO-MWCNT nanocomposite-modified electrode

First, the nanocomposite Au@rGO-MWCNT was synthesized by a hydrothermal method. Next, a temperature-controlled composite sensing film was prepared by composite modification of poly(2-(2-methoxyethoxy)ethyl methacrylate) (PMEO₂MA) and Au@rGO-MWCNT on a glassy carbon electrode (GCE). This sensor was shown to exhibit good temperature sensitivity and reversibility to dopamine. When the testing temperature is lower than the lower critical solution temperature (LCST) of the polymer, the PMEO₂MA chain is in a stretched state, which increases the distance between the Au@rGO layers and leads to the inability of MWCNTs in one layer to contact another Au@rGO layer and to low conductivity. Therefore, in this state, dopamine cannot detect an electrochemical signal, and it is termed an "off" state. When the temperature is higher than the LCST of the polymer, the PMEO₂MA chain shrinks, allowing the MWCNTs to make contact with another layer of Au@rGO; the electron transfer rate of the modified film increases, and the electrochemical behavior of dopamine turns to an "on" state. Moreover, the sensor has a wide detection range (0.1 to 9.0 μM and 9.0 to 239.0 μM), and the limit of detection of dopamine is as low as 30 nM. This method has been successfully applied to the determination of dopamine in human serum samples. The on-off sensor provides a new avenue for the application of temperature-sensitive polymers.

Influence of Salt on the Self-Organization in Solutions of Star-Shaped Poly-2-alkyl-2-oxazoline and Poly-2-alkyl-2-oxazine on Heating

The water-salt solutions of star-shaped six-arm poly-2-alkyl-2-oxazines and poly-2-alkyl-2-oxazolines were studied by light scattering and turbidimetry. The core was hexaaza[26]orthoparacyclophane and the arms were poly-2-ethyl-2-oxazine, poly-2-isopropyl-2-oxazine, poly-2-ethyl-2-oxazoline, and poly-2-isopropyl-2-oxazoline. NaCl and N-methylpyridinium p-toluenesulfonate were used as salts. Their concentration varied from 0-0.154 M. On heating, a phase transition was observed in all studied solutions. It was found that the effect of salt on the thermosensitivity of the investigated stars depends on the structure of the salt and polymer and on the salt content in the solution. The phase separation temperature decreased with an increase in the hydrophobicity of the polymers, which is caused by both a growth of the side radical size and an elongation of the monomer unit. For NaCl solutions, the phase separation temperature monotonically decreased with growth of salt concentration. In solutions with methylpyridinium p-toluenesulfonate, the dependence of the phase separation temperature on the salt concentration was non-monotonic with minimum at salt concentration corresponding to one salt molecule per one arm of a polymer star. Poly-2-alkyl-2-oxazine and poly-2-alkyl-2-oxazoline stars with a hexaaza[26]orthoparacyclophane core are more sensitive to the presence of salt in solution than the similar stars with a calix[n]arene branching center.

Self-assembly of dual-responsive amphiphilic POEGMA-b-P4VP-b-POEGMA triblock copolymers: effect of temperature, pH, and complexation with Cu2+

Amphiphilic and dual-responsive triblock copolymer POEGMA-b-P4VP-b-POEGMA synthesized by RAFT self-assemble into spherical or interconnected micelles depending on the external stimulus and their complexation with Cu2+ results in responsive nanogels.

Kinetics of the thermal response of poly(N-isopropylacrylamide co methacrylic acid) hydrogel microparticles under different environmental stimuli: A time-lapse NMR study

HYPOTHESIS

Hydrogels of N-isopropylacrylamide and methacrylic acid (P(NIPAm-co-MAA)) display pH sensitivity and complex positively charged molecules through carboxylate groups, while having a critical solution temperature at which they reduce in volume and dehydrate. We aimed to elucidate how the responsiveness of MAA to environmental changes alters PNIPAm hydrogels at the molecular level using nuclear magnetic resonance (NMR). Time-lapse NMR allows us to follow the evolution of NMR signal under a temperature stimulus, providing unique information on conformational freedom of the hydrogel polymers.

EXPERIMENTS

We used time-lapse NMR to follow the evolution of the NMR signal with time over a temperature change from 25 to 40°C and to study the swelling/deswelling kinetics of P(NIPAm-co-MAA) microgels at different pH values and ionic strengths, and in the presence of positively charged molecules complexing carboxylate groups.

FINDINGS

At acid pH, hydrogel collapse is favored over neutral pH, and at basic pH the carboxylates remain steadily hydrated during temperature increase. Increasing ionic strength results in a faster, more effective collapse than decreasing pH. Complexation of medium-sized molecules with several charges (spermine, spermidine) causes a faster collapse than complexation with large molecular weight poly(allylamine) hydrochloride, but similar to the collapse effected by large poly(diallyldimethylammonium) chloride. This work opens new perspectives to using time-lapse NMR to study thermoresponsive systems that respond to multiple stimuli, with particular relevance in designing hydrogels for drug delivery.

Comparison of Thermoresponsive Hydrogels Synthesized by Conventional Free Radical and RAFT Polymerization

We compared the influence of the polymerization mechanism onto the physical characteristics of thermoresponsive hydrogels. The Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels were successfully synthesized using reversible addition-fragmentation chain-transfer (RAFT) and free radical polymerization (FRP). The gels were prepared while using different crosslinker feed and monomer concentration. The swelling, dye release, and hydrolytic stability of the gels were investigated in water, or in representative komostrope and chaotrope salt solutions at room temperature and at 37 °C. It was found that the swelling ratio (SR) of the RAFT gels was significantly higher than that of the FRP gels; however, an increased crosslinking density resulted in a decrease of the SR of the RAFT gels as compared to the corresponding gels that are made by FRP, which indicates the limitation of the cross-linking efficiency that is attained in RAFT polymerization. Additionally, an increased monomer concentration decreased the SR of the RAFT gels, whereas a similar SR was observed for the FRP gels. However, the SR of both RAFT and FRP gels in NaSCN and Na₂SO₄ solutions were similar. Finally, the rate of dye release was significantly slower from the RAFT gels than the FRP gels and the hydrolytic stability of the RAFT gels was lower than that of FRP gels in water, but maintained similar stability in Na₂SO₄ and NaSCN solutions.

Advanced Materials by Atom Transfer Radical Polymerization

Atom transfer radical polymerization (ATRP) has been successfully employed for the preparation of various advanced materials with controlled architecture. New catalysts with strongly enhanced activity permit more environmentally benign ATRP procedures using ppm levels of catalyst. Precise control over polymer composition, topology, and incorporation of site specific functionality enables synthesis of well-defined gradient, block, comb copolymers, polymers with (hyper)branched structures including stars, densely grafted molecular brushes or networks, as well as inorganic-organic hybrid materials and bioconjugates. Examples of specific applications of functional materials include thermoplastic elastomers, nanostructured carbons, surfactants, dispersants, functionalized surfaces, and biorelated materials.

The role of hydrophobic hydration in the LCST behaviour of POEGMA300 by all-atom molecular dynamics simulations

The role of hydrophobic hydration in the LCST phase transition of POEGMA₃₀₀ by means of the breakage of cage-like water formations around the side chains.

Increasing the Bile Acid Sequestration Performance of Cationic Hydrogels by Using an Advanced/Controlled Polymerization Technique

PURPOSE

To investigate the influence of the polymerization technique and the content of hydroxyl groups on the performance of new bile acid sequestrants based on PAMPMTA-co-PHEA (PAMPTMA: poly((3-acrylamidopropyl)trimethylammonium chloride); PHEA: poly(2-hydroxyethyl acrylate)) hydrogels.

METHODS

PAMPMTA-co-PHEA hydrogels were prepared using either free radical polymerization or supplemental activator and reducing agent atom transfer radical polymerization. The chemical structure and composition of the hydrogels was confirmed by both FTIR and ssNMR. The binding of sodium cholate as the model bile salt was evaluated in simulated intestinal fluid using HPLC. The degradation of the polymers was evaluated in vitro in solutions mimicking the gastrointestinal tract environment.

RESULTS

The binding showed that an increase of the amount of HEA in the hydrogel lead to a decrease of the binding capacity. In addition, it was demonstrated for the first time that the hydrogels produced by SARA ATRP presented a higher binding capacity than similar ones produced by FRP. Finally, it was observed that copolymers of PAMPTMA-co-PHEA showed no sign of degradation in solutions mimicking both the stomach and the intestine environment.

CONCLUSIONS

The use of an advanced polymerization technique, such as the SARA ATRP, could be beneficial for the preparation of BAS with enhanced performance.

Combining ATRP and FRP Gels: Soft Gluing of Polymeric Materials for the Fabrication of Stackable Gels

Stackable gels comprised of layers of dissimilar polymers were synthesized by combining conventional free radical polymerization (FRP) and atom transfer radical polymerization (ATRP) using two approaches: (i) polymerization of a pre-gel solution containing a monomer and cross-linker introduced on top of a previously prepared gel, and (ii) simultaneous polymerization of two immiscible pre-gel solutions remaining in contact. All permutations of FRP and ATRP yielded single-piece, connected, amphiphilic gels regardless of the order of polymerization. Furthermore, multi-layer ATRP gels combining different polymers were synthesized with the FRP layer as a gluing agent. A 10-layer amphiphilic stackable gel combining n-butyl methacrylate (BMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA), and a 10-layer stackable gel combining BMA, DMAEMA and di(ethylene glycol) methyl ether methacrylate (PEO₂MA) were synthesized. This patching method, combining conventional FRP gels with ATRP ones, offers an efficient path to the formation of complex stackable gel architectures.

Mechanical and responsive properties of temperature-responsive gels prepared via atom transfer radical polymerization

Temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) gels were prepared via atom transfer radical polymerization (ATRP), and their mechanical and responsive properties were investigated from the viewpoint of their network homogeneity.

Exploration of Doubly Thermal Phase Transition Process of PDEGA-b-PDMA-b-PVCL in Water

Understanding of phase transition mechanism of thermoresponsive polymers is the basis for the rational design of smart materials with predictable properties. Linear ABC triblock terpolymer poly(di(ethylene glycol)ethyl ether acrylate)-b-poly(N,N-dimethylacrylamide)-b-poly(N-vinylcaprolactam) (PDEGA-b-PDMA-b-PVCL) was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. The doubly thermal phase transition of PDEGA-b-PDMA-b-PVCL in aqueous solution was investigated by a combination of nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), turbidimetry, and dynamic light scattering (DLS). The terpolymer self-assembles into micelles with PDEGA being the core-forming block during the first lower critical solution temperature (LCST) transition corresponding to PDEGA, which is followed by a second LCST transition corresponding to PVCL, resulting in the formation of micellar aggregates. The PDMA middle segment plays an important role as an isolation zone to prevent cooperative dehydration of the PDEGA and PVCL segments, and therefore, two independent LCST transitions corresponding to PDEGA and PVCL were observed. Furthermore, FT-IR with perturbation correlation moving window (PCMW) and two-dimensional spectroscopy (2DCOS) was applied to elucidate the two-step phase transition mechanism of this terpolymer. It was observed that the CH, ester carbonyl, and ether groups of PDEGA change prior to the CH and amide carbonyl groups of PVCL, further supporting that the two phase transitions corresponding to PDEGA and PVCL indeed occur without mutual interferences.

Exploring the influence of the poly(4-vinyl pyridine) segment on the solution properties and thermal phase behaviours of oligo(ethylene glycol) methacrylate-based block copolymers: the different aggregation processes with various morphologies

P(MEO₂MA-co-OEGMA)-b-P4VP copolymers with different lengths of P4VP segments exhibit diverse aggregation processes with various morphologies upon heating.

Poly(3-imidazolyl-2-hydroxypropyl methacrylate) – a new polymer with a tunable upper critical solution temperature in water

A novel imidazole-bearing polymer is synthesized and its solubility in water increases as the solution temperature rises or pH increases.

Direct one-pot synthesis of poly(ionic liquid) nanogels by cobalt-mediated radical cross-linking copolymerization in organic or aqueous media

Nanogels of controlled kinetic chain length were synthesized by cobalt-mediated radical cross-linking copolymerization (CMRccP) involving a vinyl monomer and a divinyl cross-linker.

Multifunctional Hydrogels with Reversible 3D Ordered Macroporous Structures

Three-dimensionally ordered macroporous (3DOM) hydrogels prepared by colloidal crystals templating display highly reversible shape memory properties, as confirmed by indirect electron microscopy imaging of their inverse replicas and direct nanoscale resolution X-ray microscopy imaging of the hydrated hydrogels. Modifications of functional groups in the 3DOM hydrogels result in various materials with programmed properties for a wide range of applications.

Polyisobutylene-Based pH-Responsive Self-Healing Polymeric Gels

This work demonstrates the successful application of dynamic covalent chemistry for the construction of self-healing gels from side-chain primary amine leucine pendant diblock copolymers of polyisobutylene (PIB) ((P(H2N-Leu-HEMA)-b-PIB)) in the presence of PIB based dialdehyde functionalized cross-linker (HOC-PIB-CHO) through imine (-HC═N-) bond formation without aiding any external stimuli. Gels were synthesized in 1,4-dioxane at room temperature at varied wt % of gelator concentration, [H2N]/[CHO] ratios and molecular weight of the block segments. The mechanical property of gels was examined by rheological measurements. We observed higher value of storage modulus (G') than the loss modulus (G″) within the linearity limits of deformation, indicating the rheological behavior in the gel is dominated by an elastic property rather than a viscous property. The G' values significantly depend upon the extent of cross-linking in the gel network. To establish self-healing property of the gels, rheology analysis through step-strain measurements (strain = 0.1 to 200%) at 25 °C was performed. The polymeric gel network shows reversible sol-gel transition for several cycles by adjusting the pH of the medium with the help of hydrochloric acid (HCl) and triethylamine (Et3N) triggers. FT-IR spectroscopy established formation of imine bonds in the gel network and these gels showed poor swelling behavior in various organic solvents because of the small interstitial porosity, confirmed by field emission-scanning electron microscopy (FE-SEM).

Evolution of high-temperature molecular relaxations in poly(2-(2-methoxyethoxy)ethyl methacrylate) upon network formation

Copolymers of 2-(2-methoxyethoxy)ethyl methacrylate (poly(MEO2MA)) are regarded as bioinert replacements of poly(N-isopropylacrylamide) in some biomedical applications. Networks of poly(MEO2MA) of various architecture form thermo-responsive hydrogels. Here, we present dielectric and mechanical spectroscopy studies on segmental motions and network relaxation processes in linear poly(MEO2MA) and its networks - bare network and the network grafted with short poly(MEO2MA) chains. We show that the α process assigned to the segmental motions of poly(MEO2MA) is independent on the polymer topology and the glass transition temperature, Tg, associated with this process equals 235-236 K for all investigated systems. The α' relaxation observed above Tg by dynamical mechanical analysis is assigned to the sub-Rouse process. It strongly depends on the polymer network architecture and slows down by four orders of magnitude upon network formation.

POSS-induced enhancement of mechanical strength in RAFT-made thermoresponsive hydrogels

In this study, covalently cross-linked thermoresponsive hydrogels were prepared with higher mechanical stability by the introduction of polyhedral oligomeric silsesquioxane (POSS) moieties.

Injectable hydrogels based on poly(ethylene glycol) and derivatives as functional biomaterials

The design criteria for injectable, in situ-gelling hydrogels are reviewed in conjunction with highlights on recent progress in the preparation of injectable PEG and PEG-analogue poly(oligoethylene glycol methacrylate) (POEGMA) hydrogels.

Injectable poly(oligoethylene glycol methacrylate)-based hydrogels with tunable phase transition behaviours: physicochemical and biological responses

The potential of poly(oligoethylene glycol methacrylate) (POEGMA) hydrogels with varying thermosensitivities as soft materials for biomedical applications is demonstrated. Hydrogels are prepared from hydrazide and aldehyde functionalized POEGMA precursors, yielding POEGMA hydrogels with a volume phase transition temperature (VPTT) below (PO0), close to (PO10) and well above (PO100) physiological temperature. Hydrogels with VPTTs close to and above physiological temperature exhibit biological properties similar to those typically observed for poly(ethylene glycol) hydrogels (i.e. low protein adsorption, low cell adhesion and minimal inflammatory responses in vivo) while hydrogels with VPTTs lower than physiological temperature exhibit biological properties more analogous to poly(N-isopropylacrylamide) above its phase transition temperature (temperature-switchable cell adhesion, higher protein adsorption and somewhat more acute inflammation in vivo). As such, the use of POEGMA precursors with varying chain lengths of ethylene oxide grafts offers a versatile platform for the design of hydrogels with tunable physiological properties via simple copolymerization.