Functional Polylactide-g-Paclitaxel–Poly(ethylene glycol) by Azide–Alkyne Click Chemistry

Location of a Hydrophobic Load in Poly(oligo(ethylene glycol) methyl ether methacrylate)s (PEGMAs) Dissolved in Water and Probed by Fluorescence

Two series of pyrene-labeled poly(oligo(ethylene glycol) methyl ether methacrylate)s referred to as PyEG5-PEGnMA and PyC4-PEGnMA were prepared to probe the region surrounding the polymethacrylate backbone by using the fluorescence of the dye pyrene. PyEG5-PEGnMA and PyC4-PEGnMA were prepared by copolymerizing the EGnMA methacrylate monomers with penta(ethylene glycol) 1-pyrenemethyl ether methacrylate or 1-pyrenebutyl methacrylate, respectively. In organic solvents, the much longer 18 non-hydrogen atom linker connecting the pyrene moieties to the polymethacrylate backbone in the PyEG5-PEGnMA samples enabled the deployment of the pyrenyl labels into the solution. In water, however, an excited pyrene for PyEG5-PEGnMA was found to probe a same volume as for the PyC4-PEGnMA samples where a much shorter 6 non-hydrogen atom spacer connected pyrene to the backbone. Another surprising observation, considering that the hydrophobicity of pyrene induces strong pyrene aggregation for many pyrene-labeled water-soluble polymers (Py-WSPs) in water, was the little pyrene aggregation found for the PyEG5-PEGnMA and PyC4-PEGnMA samples in water. These effects could be related to the organic-like domain (OLD) generated by the oligo(ethylene glycol) side chains densely arranged around the polymethacrylate backbone of the polymeric bottlebrush (PBB). Additional fluorescence experiments conducted with the penta(ethylene glycol) 1-pyrenemethyl ether derivative indicated that the cylindrical OLD surrounding the polymethacrylate backbone had a chemical composition similar to that of ethylene glycol. Binding of hydrophobic pyrene molecules to unlabeled PEGnMA bottlebrushes in water further supported the existence of the OLD. The demonstration, that PEGnMA samples form an OLD in water, which can host and protect hydrophobic cargoes like pyrene, should lead to the development of improved PEGnMA-based drug delivery systems.

Poly(Lactic Acid)-Based Graft Copolymers: Syntheses Strategies and Improvement of Properties for Biomedical and Environmentally Friendly Applications: A Review

As a potential replacement for petroleum-based plastics, biodegradable bio-based polymers such as poly(lactic acid) (PLA) have received much attention in recent years. PLA is a biodegradable polymer with major applications in packaging and medicine. Unfortunately, PLA is less flexible and has less impact resistance than petroleum-based plastics. To improve the mechanical properties of PLA, PLA-based blends are very often used, but the outcome does not meet expectations because of the non-compatibility of the polymer blends. From a chemical point of view, the use of graft copolymers as a compatibilizer with a PLA backbone bearing side chains is an interesting option for improving the compatibility of these blends, which remains challenging. This review article reports on the various graft copolymers based on a PLA backbone and their syntheses following two chemical strategies: the synthesis and polymerization of modified lactide or direct chemical post-polymerization modification of PLA. The main applications of these PLA graft copolymers in the environmental and biomedical fields are presented.

Molecular polymer bottlebrushes in nanomedicine: therapeutic and diagnostic applications

Molecular polymer bottlebrushes are densely grafted, individual macromolecules with nanoscale proportions. The last decade has seen an increased focus on this material class, especially in nanomedicine and for biomedical applications. This Feature Article provides an overview of major developments in this area to highlight the many opportunities that these polymer architectures bring to nano-bio research. The article covers aspects of bottlebrush synthesis and summarises their use in drug and gene delivery, imaging, as theranostics and as prototype materials to correlate nanoparticle structure and composition to biological function and behaviour. Areas for future research in this area are discussed.

Novelty in the development of biodegradable polymer coatings for biomedical devices: paclitaxel grafting on PDMMLA derivatives

Biocompatible and biodegradable polymers are widely used in the medical field. In some cases, the biopolymer is accompanied by an active drug, which is delivered locally in a controlled manner in order to improve the healing conditions. Poly([R,S]-3,3-dimethylmalic acid) (PDMMLA) is a synthetic amphiphilic biodegradable polymer, which unlike PLA, can be chemically modified to adapt hydrophilic/hydrophobic balance, degradation kinetics, and physicochemical and biological properties. It may contain a lateral alkyl group or a functional group for coupling bioactive molecules to release during its degradation. In this work, we realized the chemical grafting of paclitaxel (PTX), a microtubule stabilizing anti-cancer agent on PDMMLA derivatives bio-polyesters following a Steglich esterification protocol. 1D and 2D NMR analyses validated the reaction with 10% (using 0.1 equivalent) of PTX on the copolymer PDMMLAH₄₀-co-Hex₆₀ (PDMMLA 40/60) and a maximal PTX grafting rate of 55% on the homopolymer PDMMLAH (PDMMLA 100/0). In vitro adhesion and cytotoxicity assays were carried out on HUVEC cells with PDMMLA 40/60, PDMMLA-PTX 30/10/60 and PLA.

Paclitaxel Drug Delivery Systems: Focus on Nanocrystals' Surface Modifications

Paclitaxel (PTX) is a chemotherapeutic agent that belongs to the taxane family and which was approved to treat various kinds of cancers including breast cancer, ovarian cancer, advanced non-small-cell lung cancer, and acquired immunodeficiency syndrome (AIDS)-related Kaposi’s sarcoma. Several delivery systems for PTX have been developed to enhance its solubility and pharmacological properties involving liposomes, nanoparticles, microparticles, micelles, cosolvent methods, and the complexation with cyclodextrins and other materials that are summarized in this article. Specifically, this review discusses deeply the developed paclitaxel nanocrystal formulations. As PTX is a hydrophobic drug with inferior water solubility properties, which are improved a lot by nanocrystal formulation. Based on that, many studies employed nano-crystallization techniques not only to improve the oral delivery of PTX, but IV, intraperitoneal (IP), and local and intertumoral delivery systems were also developed. Additionally, superior and interesting properties of PTX NCs were achieved by performing additional modifications to the NCs, such as stabilization with surfactants and coating with polymers. This review summarizes these delivery systems by shedding light on their route of administration, the methods used in the preparation and modifications, the in vitro or in vivo models used, and the advantages obtained based on the developed formulations.

A sulfobetaine zwitterionic polymer-drug conjugate for multivalent paclitaxel and gemcitabine co-delivery

A zwitterionic polymer-drug conjugate (ZPDC) strategy is developed for the co-delivery of paclitaxel (PTX) and gemcitabine (GEM) chemotherapeutics, as well as a near-infrared fluorescence imaging agent cyanine5.5 (Cy5.5). The well-defined ZPDC is synthesized by tandem azide-alkyne and thiol-ene click functionalization of a biodegradable acetylenyl/allyl-functionalized polylactide and zwitterionic character is conferred by sulfobetaine. It has a number-average molecular weight of 53.6 kDa, comprising 6.5% PTX and 17.7% GEM by weight. Cy5.5 moieties are readily introduced to the ZPDC via conjugation. In aqueous solutions, the ZPDC exhibits a hydrodynamic diameter of 46 nm. In vitro MIA PaCa-2 human pancreatic cancer cells show strong ZPDC cellular uptake and cytotoxicity. In mice, the ZPDC exhibits long blood circulation, effective tumor accumulation, biocompatibility, therapeutic effect, and integrated imaging capacity. Overall, this work illustrates that ZPDCs are promising systems for chemotherapy delivery and bioimaging applications.

Noble Metal Nanoparticles-Based Colorimetric Biosensor for Visual Quantification: A Mini Review

Nobel metal can be used to form a category of nanoparticles, termed noble metal nanoparticles (NMNPs), which are inert (resistant to oxidation/corrosion) and have unique physical and optical properties. NMNPs, particularly gold and silver nanoparticles (AuNPs and AgNPs), are highly accurate and sensitive visual biosensors for the analytical detection of a wide range of inorganic and organic compounds. The interaction between noble metal nanoparticles (NMNPs) and inorganic/organic molecules produces colorimetric shifts that enable the accurate and sensitive detection of toxins, heavy metal ions, nucleic acids, lipids, proteins, antibodies, and other molecules. Hydrogen bonding, electrostatic interactions, and steric effects of inorganic/organic molecules with NMNPs surface can react or displacing capping agents, inducing crosslinking and non-crosslinking, broadening, or shifting local surface plasmon resonance absorption. NMNPs-based biosensors have been widely applied to a series of simple, rapid, and low-cost diagnostic products using colorimetric readout or simple visual assessment. In this mini review, we introduce the concepts and properties of NMNPs with chemical reduction synthesis, tunable optical property, and surface modification technique that benefit the development of NMNPs-based colorimetric biosensors, especially for the visual quantification. The “aggregation strategy” based detection principle of NMNPs colorimetric biosensors with the mechanism of crosslinking and non-crosslinking have been discussed, particularly, the critical coagulation concentration-based salt titration methodology have been exhibited by derived equations to explain non-crosslinking strategy be applied to NMNPs based visual quantification. Among the broad categories of NMNPs based biosensor detection analyses, we typically focused on four types of molecules (melamine, single/double strand DNA, mercury ions, and proteins) with discussion from the standpoint of the interaction between NMNPs surface with molecules, and DNA engineered NMNPs-based biosensor applications. Taken together, NMNPs-based colorimetric biosensors have the potential to serve as a simple yet reliable technique to enable visual quantification.

Linear-Dendritic Alternating Copolymers

Herein, the design, synthesis, and characterization of an unprecedented copolymer consisting of alternating linear and dendritic segments is described. First, a 4th-generation Hawker-type dendron with two azide groups was synthesized, followed by a step-growth azide-alkyne "click" reaction between the 4th-generation diazido dendron and poly(ethylene glycol) diacetylene to create the target polymers. Unequal reactivity of the functional groups was observed in the step-growth polymerization. The resulting copolymers, with alternating hydrophilic linear and hydrophobic dendritic segments, can spontaneously associate into a unique type of microphase-segregated nanorods in water.

Synthesis of functional and boronic acid-containing aliphatic polyesters via Suzuki coupling

Imparting additional functionalities along the side chains of polyesters remains a challenge due to the laborious nature of monomer synthesis and limited polymer functionalization methods for polyesters. To address this challenge, a carbon-carbon bond forming reaction was studied to introduce pendent functional groups in polylactides. This functionalization approach was applied for preparing boronic acid-containing polylactides, an unexplored class of polymers.

Zwitterionic Cross-Linked Biodegradable Nanocapsules for Cancer Imaging

Zwitterionic cross-linked biodegradable nanocapsules (NCs) were synthesized for cancer imaging. A polylactide (PLA)-based diblock copolymer with two blocks carrying acetylenyl and allyl groups respectively was synthesized by ring-opening polymerization (ROP). Azide-alkyne "click" reaction was conducted to conjugate sulfobetaine (SB) zwitterions and fluorescent dye Cy5.5 onto the acetylenyl-functionalized first block of the diblock copolymer. The resulting copolymer with a hydrophilic SB/Cy5.5-functionalized PLA block and a hydrophobic allyl-functionalized PLA block could stabilize miniemulsions because of its amphiphilic diblock structure. UV-induced thiol-ene "click" reaction between a dithiol cross-linker and the hydrophobic allyl-functionalized block of the copolymer at the peripheral region of nanoscopic oil nanodroplets in the miniemulsion generated cross-linked polymer NCs with zwitterionic outer shells. These NCs showed an average hydrodynamic diameter ( D_h) of 136 nm. They exhibited biodegradability, biocompatibility and high colloidal stability. In vitro study indicated that these NCs could be taken up by MIA PaCa-2 cancer cells. In vivo imaging study showed that, comparing to a small molecule dye, NCs had a longer circulation time, facilitating their accumulation at tumors for cancer imaging. Overall, this work demonstrates the applicability of zwitterionic biodegradable polymer-based materials in cancer diagnosis.

A multifunctional biodegradable brush polymer-drug conjugate for paclitaxel/gemcitabine co-delivery and tumor imaging

A multifunctional biodegradable brush polymer-drug conjugate (BPDC) is developed for the co-delivery of hydrophobic paclitaxel (PTX) and hydrophilic gemcitabine (GEM) chemotherapeutics, as well as a tumor imaging agent. A novel ternary copolymer of conventional, acetylenyl-functionalized and allyl-functionalized lactides is prepared to serve as the backbone precursor of BPDC. Acetylenyl groups of the copolymer are then reacted with poly(ethylene glycol) (PEG) side chains and cyanine5.5, a fluorescent probe, via azide-alkyne click reactions. Subsequently, the allyl groups of the yielded PEG-grafted brush polymer are used to covalently link PTX and GEM onto the backbone via thiol-ene click reactions. The resulting BPDC exhibits an average hydrodynamic diameter of 111 nm. Sustained and simultaneous release of PTX and GEM from the BPDC is observed in phosphate buffered saline, with the release of PTX showing sensitivity in mild acidic conditions. In vitro studies using MIA PaCa-2 human pancreatic cancer cells illustrate the cellular uptake and cytotoxicity of the BPDC. In vivo, the BPDC possesses long blood circulation, tumor accumulation, and enables optical tumor imaging. Further development and testing is warranted for multifunctional conjugated brush polymer systems that integrate combination chemotherapies and imaging.

Monitoring glycosidase activity for clustered sugar substrates, a study on β-glucuronidase

Enzymatically-triggered probes to determine glucuronidase hydrolysis kinetics for clustered substrates.

Functional biodegradable polymers via ring-opening polymerization of monomers without protective groups

Biodegradable polymers are of current interest and chemical functionality in such materials is often demanded in advanced biomedical applications. Functional groups often are not tolerated in the polymerization process of ring-opening polymerization (ROP) and therefore protective groups need to be applied. Advantageously, several orthogonally reactive functions are available, which do not demand protection during ROP. We give an insight into available, orthogonally reactive cyclic monomers and the corresponding functional synthetic and biodegradable polymers, obtained from ROP. Functionalities in the monomer are reviewed, which are tolerated by ROP without further protection and allow further post-modification of the corresponding chemically functional polymers after polymerization. Synthetic concepts to these monomers are summarized in detail, preferably using precursor molecules. Post-modification strategies for the reported functionalities are presented and selected applications highlighted.

Designing Smart Polymer Conjugates for Controlled Release of Payloads

Incorporating labile bonds inside polymer backbone and side chains yields interesting polymer materials that are responsive to change of environmental stimuli. Drugs can be conjugated to various polymers through different conjugation linkages and spacers. One of the key factors influencing the release profile of conjugated drugs is the hydrolytic stability of the conjugated linkage. Generally, the hydrolysis of acid-labile linkages, including acetal, imine, hydrazone, and to some extent β-thiopropionate, are relatively fast and the conjugated drug can be completely released in the range of several hours to a few days. The cleavage of ester linkages are usually slow, which is beneficial for continuous and prolonged release. Another key structural factor is the water solubility of polymer-drug conjugates. Generally, the release rate from highly water-soluble prodrugs is fast. In prodrugs with large hydrophobic segments, the hydrophobic drugs are usually located in the hydrophobic core of micelles and nanoparticles, which limits the access to the water, hence lowering significantly the hydrolysis rate. Finally, self-immolative polymers are also an intriguing new class of materials. New synthetic pathways are needed to overcome the fact that much of the small molecules produced upon degradation are not active molecules useful for biomedical applications.

Thiol-substituted copolylactide: synthesis, characterization and post-polymerization modification using thiol–ene chemistry

A copolylactide that is substituted with pendent thiol groups (thiol-PL) undergoes coupling with a variety of electrophiles under mild conditions via thiol–ene addition.

Preclinical development of drug delivery systems for paclitaxel-based cancer chemotherapy

Paclitaxel (PTX) is one of the most successful drugs ever used in cancer chemotherapy, acting against a variety of cancer types. Formulating PTX with Cremophor EL and ethanol (Taxol®) realized its clinical potential, but the formulation falls short of expectations due to side effects such as peripheral neuropathy, hypotension, and hypersensitivity. Abraxane®, the albumin bound PTX, represents a superior replacement of Taxol® that mitigates the side effects associated with Cremophor EL. While Abraxane® is now considered a gold standard in chemotherapy, its 21% response rate leaves much room for further improvement. The quest for safer and more effective cancer treatments has led to the development of a plethora of innovative PTX formulations, many of which are currently undergoing clinical trials. In this context, we review recent development of PTX drug delivery systems and analyze the design principles underpinning each delivery strategy. We chose several representative examples to highlight the opportunities and challenges of polymeric systems, lipid-based formulations, as well as prodrug strategies.

Biodegradable zwitterionic sulfobetaine polymer and its conjugate with paclitaxel for sustained drug delivery

A fully biodegradable zwitterionic polymer and the corresponding conjugate with paclitaxel (PTX) were synthesized as promising biomaterials. Allyl-functionalized polylactide (PLA) was employed as the precursor of polymer backbones. UV-induced thiol-ene reaction was conducted to conjugate thiol-functionalized sulfobetaine (SB) with the PLA-based backbone. The resulting zwitterionic polymer did not exhibit considerable cytotoxicity. A polymer-drug conjugate was also obtained by thiol-ene reaction of both thiol-functionalized SB and PTX with allyl-functionalized PLA. The conjugate could readily form narrowly-dispersed nanoparticles in aqueous solutions with a volume-average hydrodynamic diameter (Dh,V) of 19.3 ± 0.2 nm. Such a polymer-drug conjugate-based drug delivery system showed full degradability, well-suppressed non-specific interaction with biomolecules, and sustained drug release. In vitro assessments also confirmed the significant anti-cancer efficacy of the conjugate. After 72 h incubation with PLA-SB/PTX containing 10 µg/mL of PTX, the cell viabilities of A549, MCF7, and PaCa-2 cells were as low as 20.0 ± 2.5%, 1.7 ± 1.7%, and 14.8 ± 0.9%, respectively. Both flow cytometry and confocal microscopy suggested that the conjugates could be easily uptaken by A549 cells before the major release of PTX moieties. Overall, this work elucidates promising potentials of biodegradable zwitterionic polymer-based materials in biomedical applications.

STATEMENT OF SIGNIFICANCE

The applicability of FDA-approved biodegradable aliphatic polyesters has been significantly restricted because they are hydrophobic and lack functionalities. Recently zwitterionic polymers have emerged as promising hydrophilic biomaterials, but most of the reported zwitterionic polymers are non-biodegradable. This study reports a novel aliphatic polyester-based zwitterionic polymer and the corresponding polymer-drug conjugate. Their aliphatic polyester and zwitterionic components provide them with high enzymatic degradability and low nonspecific interactions with biomolecules, respectively. While the zwitterionic polymer did not show noticeable cytotoxicity, the corresponding polymer-anticancer drug conjugate exhibited acid-sensitive sustained drug release, remarkable effectiveness in killing cancer cells, as well as the ready cellular internalization. This work lays a foundation for the further development of synthetic biodegradable zwitterionic polymer-based materials which potentially may have broad and significant biomedical applications.

Branched polyesters: Preparative strategies and applications

In the last 20years, the availability of precision chemical tools (e.g. controlled/living polymerizations, 'click' reactions) has determined a step change in the complexity of both the macromolecular architecture and the chemical functionality of biodegradable polyesters. A major part in this evolution has been played by the possibilities that controlled macromolecular branching offers in terms of tailored physical/biological performance. This review paper aims to provide an updated overview of preparative techniques that derive hyperbranched, dendritic, comb, grafted polyesters through polycondensation or ring-opening polymerization mechanisms.

Prodrug Strategies for Paclitaxel

Paclitaxel is an anti-tumor agent with remarkable anti-tumor activity and wide clinical uses. However, it is also faced with various challenges especially for its poor water solubility and low selectivity for the target. To overcome these disadvantages of paclitaxel, approaches using small molecule modifications and macromolecule modifications have been developed by many research groups from all over the world. In this review, we discuss the different strategies especially prodrug strategies that are currently used to make paclitaxel more effective.

The use of azide-alkyne click chemistry in recent syntheses and applications of polytriazole-based nanostructured polymers

The rapid development of efficient organic click coupling reactions has significantly facilitated the construction of synthetic polymers with sophisticated branched nanostructures. This Feature Article summarizes the recent progress in the application of efficient copper-catalyzed and copper-free azide-alkyne cycloaddition (CuAAC and CuFAAC) reactions in the syntheses of dendrimers, hyperbranched polymers, star polymers, graft polymers, molecular brushes, and cyclic graft polymers. Literature reports on the interesting properties and functions of these polytriazole-based nanostructured polymers are also discussed to illustrate their potential applications as self-healing polymers, adhesives, polymer catalysts, opto-electronic polymer materials and polymer carriers for drug and imaging molecules.

Chemically Intractable No More: In Vivo Incorporation of "Click"-Ready Fatty Acids into Poly-[(R)-3-hydroxyalkanoates] in Escherichia coli

Poly-[(R)-3-hydroxyalkanoate] biopolymers, or PHAs, are biocompatible and biodegradable polyesters that can be produced by diverse microbial strains. PHA polymers have found widespread uses in applications ranging from sustainable replacements of nonbiodegradable bulk-commodity plastics to biomaterials. However, further expansion into other markets and industries has generally been limited by the inability to chemically modify these polymers. Recently, our lab engineered E. coli LSBJ, a microbial strain able to produce PHA copolymers with controlled unit compositions from simple and accessible fatty acid feedstocks. We envisioned meaningfully broadening the application spectrum of these materials via production of chemically tractable PHA biopolymers containing "click"-ready chemical functionalities. With a myriad of applications in mind, in this study we demonstrate the synthesis and biopolymerization of a panel of ω-azido fatty acids and take the first exploratory steps toward demonstrating their conjugation via a strain-promoted azide-alkyne cycloaddition (SPAAC) reaction. The convenience of accessing these materials will open the door to new applications for functionalized PHA polymers.

Synthesis of cyclic peptide disulfide–PHPMA conjugates via sequential active ester aminolysis and CuAAC coupling

A synthetic strategy for the preparation of cyclic peptide disulfide–polymer conjugates that does not require peptide protecting groups is reported.

Dual responsive polymeric nanoparticles prepared by direct functionalization of polylactic acid-based polymers via graft-from ring opening metathesis polymerization

Polylactic acid (PLA) has found widespread use in plastics and in biomedical applications due to its biodegradability into natural benign products. However, PLA-based materials remain limited in usefulness due to difficulty of incorporating functional groups into the polymer backbone. In this paper, we report a strategy for PLA functionalization that establishes the preparation of highly derivatized materials in which ring opening metathesis polymerization (ROMP) is employed as a graft-from polymerization technique utilizing a norbornene-modified handle incorporated into the PLA backbone. As a demonstration of this new synthetic methodology, a PLA-derived nanoparticle bearing imidazole units protected with a photolabile group was prepared. The morphology of this material could be controllably altered in response to exposure of UV light or acidic pH as a stimulus. We anticipate that this graft-from approach to derivatization of PLA could find broad use in the development of modified, biodegradable PLA-based materials.

Acid- and base-functionalized core-confined bottlebrush copolymer catalysts for one-pot cascade reactions

We demonstrate a novel method that enables the formation of core-confined bottlebrush copolymers (CCBCs) as catalyst supports. Significantly, owing to the site-isolated effect, these CCBC catalysts with the incompatible acidic para-toluenesulfonic acid (PTSA) and basic 4-(dimethylamino)pyridine (DMAP) groups can conduct a simple two-step sequential reaction in one vessel.

Biodegradable micelles capable of mannose-mediated targeted drug delivery to cancer cells

A targeted micellar drug delivery system is developed from a biocompatible and biodegradable amphiphilic polyester, poly(Lac-OCA)-b-(poly(Tyr(alkynyl)-OCA)-g-mannose) (PLA-b-(PTA-g-mannose), that is synthesized via controlled ring-opening polymerization of O-carboxyanhydride (OCA) and highly efficient "Click" chemistry. Doxorubicin (DOX), a model lipophilic anticancer drug, can be effectively encapsulated into the micelles, and the mannose moiety allows active targeting of the micelles to cancer cells that specifically express mannose receptors, which thereafter enhances the anticancer efficiency of the drug. Comprised entirely of biodegradable and biocompatible polyesters, this micellar system demonstrates promising potentials for targeted drug delivery and cancer therapy.

Synthesis and click chemistry of a new class of biodegradable polylactide towards tunable thermo-responsive biomaterials

A new class of clickable and biodegradable polylactide was designed and prepared via bulk polymerization of 3,6-dipropargyloxymethyl-1,4-dioxane-2,5-dione (1) which was synthesized from easily accessible propargyloxylactic acid (5). A homopolymer of 1 and random copolymer of 1 with l-lactide were obtained as amorphous materials and exhibit low Tg of 8.5 and 34 °C, respectively, indicating their promising potentials for biomedical applications. The statistical nature of random copolymers was investigated by DSC analysis and 13C NMR spectroscopy, which implies the random distribution of terminal alkyne groups along the back bone of copolymers. The efficient click post-modification of this new class of polylactide with alkyl and mPEG azides affords novel hydrophilic biomaterials, which exhibit reversible thermo-responsive properties as evidenced by their tunable LCST ranging from 22 to 69 °C depending on the balance of the incorporated hydrophilic/hydrophobic side chains. These results indicate the generality of this new class of clickable polylactide in preparing novel smart biomaterials in a simple and efficient manner via click chemistry.

Well-defined diblock brush polymer–drug conjugates for sustained delivery of paclitaxel

The synthesis, characterization and property studies of paclitaxel (PTXL)-containing brush polymer–drug conjugates (BPDCs) are presented and the influence of grafting structures of BPDCs on their assembly behaviour, drug release profile and therapeutic effects is discussed in this article.

From nanospheres to micelles: simple control of PCL-g-PEG copolymers’ amphiphilicity through thiol–yne photografting

A unique combination of polyester post-polymerization modification and photoradical thiol–yne addition is reported for the synthesis of amphiphilic degradable graft copolymers with controlled compositions, used to prepare micelles or nanospheres.

A degradable brush polymer–drug conjugate for pH-responsive release of doxorubicin

We report the synthesis, characterization andin vitroassessment of a degradable brush polymer–drug conjugate which can enable acid-triggered release of doxorubicin (DOX).

Synthesis of a library of propargylated and PEGylated α-hydroxy acids toward "clickable" polylactides via hydrolysis of cyanohydrin derivatives

A new simple and practical protocol for scalable synthesis of a novel library of propargylated and PEGylated α-hydroxy acids toward the preparation of "clickable" polylactides was described. The overall synthesis starting from readily available propargyl alcohol, bromoacetaldehyde diethyl acetal, and OEGs or PEGs was developed as a convenient procedure with low cost and no need of column chromatographic purification. The terminal alkyne functionality survives from hydrolysis of the corresponding easily accessible cyanohydrin derivatives in methanolic sulfuric acid. Facile desymmetrization, monofunctionalization, and efficient chain-elongation coupling of OEGs further enable the incorporation of OEGs to α-hydroxy acids in a simple and efficient manner. At the end, synthesis of allyloxy lactic acid indicates that an alkene group is also compatible with the developed method.