Dendritic and Hyperbranched Polymers from Macromolecular Units: Elegant Approaches to the Synthesis of Functional Polymers

Hyperbranched Polyelectrolyte Copolymers as Novel Candidate Delivery Systems for Bio-Relevant Compounds

In this study, reversible addition-fragmentation chain transfer (RAFT) polymerization is utilized in order to synthesize novel hyperbranched poly(oligoethylene glycol) methyl ether methacrylate-co-tert-butyl methacrylate-co-methacrylic acid) (H-[P(OEGMA-co-tBMA-co-MAA)]) copolymers in combination with selective hydrolysis reactions. The copolymers showing amphiphilicity induced by the polar OEGMA and hydrophobic tBMA monomeric units, and polyelectrolyte character due to MAA units, combined with unique macromolecular architecture were characterized by physicochemical techniques, such as size exclusion chromatography (SEC) and ¹H-NMR spectroscopy. The hyperbranched copolymers were investigated in terms of their ability to self-assemble into nanostructures when dissolved in aqueous media. Dynamic light scattering and fluorescence spectroscopy revealed multimolecular aggregates of nanoscale dimensions with low critical aggregation concentration, the size and mass of which depend on copolymer composition and solution conditions, whereas zeta potential measurements indicated pH sensitive features. In addition, aiming to evaluate their potential use as nanocarriers, the copolymers were studied in terms of their drug encapsulation and protein complexation ability utilizing curcumin and lysozyme, as a model hydrophobic drug and a model cationic protein, respectively.

Biocompatible non-leachable antimicrobial polymers with a nonionic hyperbranched backbone and phenolic terminal units

This work aimed to develop biocompatible non-leachable antimicrobial polymers without ionic structures. A series of nonionic hyperbranched polymers (HBPs) with an isatin-based backbone and phenolic terminal units were synthesized and characterized. The molecular structures and thermal properties of the obtained HBPs were characterized by SEC, NMR, FTIR, TGA and DSC analyses. Disk diffusion assay revealed significant antibacterial activity of the obtained phenolic HBPs against nine different pathogenic bacteria. The presence of a methoxy or long alkyl group close to the phenolic unit enhanced the antibacterial effect against certain Gram positive and negative bacteria. The obtained nonionic HBPs were blended in polyester poly(hexamethylene terephthalate) films, which showed no noticeable leakage after being immersed in water for 5 days. Finally, these HBPs showed no cytotoxicity effect to MG-63 osteoblast-like human cells according to MTT analysis, and negligible hemolytic effect.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

Thermally-induced hyperbranching of bromine-containing polyesters by insertion of in situ generated chain-end carbenes

Hyperbranched, biodegradable PCL-based polymers are obtained through a random but invasive migration of an in situ generated carbene end group which is unmasked via the thermolysis of its precursor diazirine moiety. These hyperbranched cores are used as macroinitiators for 'grafting-from' polymerisation using controlled radical polymerisation to achieve amphiphilic copolymers which can subsequently be self-assembled into spherical core-shell micelles.

Spatially Controlled Highly Branched Vinylsilicones

Branched silicones possess interesting properties as oils, including their viscoelastic behavior, or as precursors to controlled networks. However, highly branched silicone polymers are difficult to form reliably using a “grafting to” strategy because functional groups may be bunched together preventing complete conversion for steric reasons. We report the synthesis of vinyl-functional highly branched silicone polymers based, at their core, on the ability to spatially locate functional vinyl groups along a silicone backbone at the desired frequency. Macromonomers were created and then polymerized using the Piers–Rubinsztajn reaction with dialkoxyvinylsilanes and telechelic HSi-silicones; molecular weights of the polymerized macromonomers were controlled by the ratio of the two reagents. The vinyl groups were subjected to iterative (two steps, one pot) hydrosilylation with alkoxysilane and Piers–Rubinsztajn reactions, leading to high molecular weight, highly branched silicones after one or two iterations. The vinyl-functional products can optionally be converted to phenyl/methyl-modified branched oils or elastomers.

Multi-responsive poly(oligo(ethylene glycol)methyl methacrylate)-co-poly(2-(diisopropylamino)ethyl methacrylate) hyperbranched copolymers via reversible addition fragmentation chain transfer polymerization

Multi-responsive P(OEGMA-co-DIPAEMA) hyperbranched copolymers are synthesized via RAFT polymerization. The copolymers form different aggregates in aqueous media depending on solution pH, temperature and copolymer composition.

Synthesis and Solution Properties of a Novel Hyperbranched Polymer Based on Chitosan for Enhanced Oil Recovery

A new type of chitosan-modified hyperbranched polymer (named HPDACS) was synthesized through the free-radical polymerization of surface-modified chitosan with acrylic acid (AA) and acrylamide (AM) to achieve an enhanced oil recovery. The optimal polymerization conditions of HPDACS were explored and its structure was characterized by Fourier-transform infrared spectroscopy, hydrogen nuclear magnetic resonance, and environmental scanning electron microscopy. The solution properties of HPDACS in ultrapure water and simulated brine were deeply studied and then compared with those of partially hydrolyzed polyacrylamide (HPAM) and a dendritic polymer named HPDA. The experimental results showed that HPDACS has a good thickening ability, temperature resistance, and salt resistance. Its viscosity retention rate exceeded 79.49% after 90 days of aging, thus meeting the performance requirements of polymer flooding. After mechanical shearing, the viscosity retention rates of HPDACS in ultrapure water and simulated brine were higher than those of HPAM and HPDA, indicating its excellent shear resistance and good viscoelasticity. Following a 95% water cut after preliminary water flooding, 0.3 pore volume (PV) and 1500 mg/L HPDACS solution flooding and extended water flooding could further increase the oil recovery by 19.20%, which was higher than that by HPAM at 10.65% and HPDA at 13.72%. This finding indicates that HPDACS has great potential for oil displacement.

Wavelength-gated photoreversible polymerization and topology control

We exploit the wavelength dependence of [2 + 2] photocycloadditions and -reversions of styrylpyrene to exert unprecedented control over the photoreversible polymerization and topology of telechelic building blocks. Blue light (λ max = 460 nm) initiates a catalyst-free polymerization yielding high molar mass polymers (M n = 60 000 g mol-1), which are stable at wavelengths exceeding 430 nm, yet highly responsive to shorter wavelengths. UVB irradiation (λ max = 330 nm) induces a rapid depolymerization affording linear oligomers, whereas violet light (λ max = 410 nm) generates cyclic entities. Thus, different colors of light allow switching between a depolymerization that either proceeds through cyclic or linear topologies. The light-controlled topology formation was evidenced by correlation of mass spectrometry (MS) with size exclusion chromatography (SEC) and ion mobility data. Critically, the color-guided topology control was also possible with ambient laboratory light affording cyclic oligomers, while sunlight activated the linear depolymerization pathway. These findings suggest that light not only induces polymerization and depolymerization but that its color can control the topological outcomes.

Self-assembly of Organic Nanomaterials and Biomaterials: The Bottom-Up Approach for Functional Nanostructures Formation and Advanced Applications

In this paper, we survey recent advances in the self-assembly processes of novel functional platforms for nanomaterials and biomaterials applications. We provide an organized overview, by analyzing the main factors that influence the formation of organic nanostructured systems, while putting into evidence the main challenges, limitations and emerging approaches in the various fields of nanotechology and biotechnology. We outline how the building blocks properties, the mutual and cooperative interactions, as well as the initial spatial configuration (and environment conditions) play a fundamental role in the construction of efficient nanostructured materials with desired functional properties. The insertion of functional endgroups (such as polymers, peptides or DNA) within the nanostructured units has enormously increased the complexity of morphologies and functions that can be designed in the fabrication of bio-inspired materials capable of mimicking biological activity. However, unwanted or uncontrollable effects originating from unexpected thermodynamic perturbations or complex cooperative interactions interfere at the molecular level with the designed assembly process. Correction and harmonization of unwanted processes is one of the major challenges of the next decades and requires a deeper knowledge and understanding of the key factors that drive the formation of nanomaterials. Self-assembly of nanomaterials still remains a central topic of current research located at the interface between material science and engineering, biotechnology and nanomedicine, and it will continue to stimulate the renewed interest of biologist, physicists and materials engineers by combining the principles of molecular self-assembly with the concept of supramolecular chemistry.

Amphiphilic hyperbranched polymers: synthesis, characterization and self-assembly performance

Abstract

A series of amphiphilic hyperbranched polymers (AHP-s, the “s” refers to the algebra of AHP) were synthesized by the reaction between hydroxyl-terminated hyperbranched polymers (HBP-s, the “s” refers to the algebra of HBP) and palmitoyl chloride. FTIR, NMR and GPC were used to determine the structure of AHP-s, the results showed that AHP-s exhibits core-shell structure. The thermal properties of polymers were investigated by DSC and TGA. It was found that AHP-2, AHP-3 and AHP-4 display higher thermal stability than AHP-1 (AHP-1, AHP-2, AHP-3 and AHP-4 represent the first, second, third and fourth generation AHP, respectively). Furthermore, the self-assembly performance of AHP-s in THF solvent was investigated by TEM and SEM. Finally, the encapsulation capacity of the AHP-s for methyl orange (MO) was explored at different concentrations of AHP-s and pH conditions. It was found that AHP-s is capable of accommodating hydrophilic guest MO. Moreover, the higher generation of AHP-s, the stronger encapsulation capacity obtained. And the encapsulation capacity closely associated with the pH of encapsulation system.

Graphical abstract

Hyperbranched Polymers in Modifying Natural Plant Fibers and Their Applications in Polymer Matrix Composites-A Review

Natural plant fibers have been widely used in the agricultural and forest industries, and even in the automobile industry, especially for producing fiber reinforced polymer matrix composites. However, the low mechanical properties of composites remain the key problem in the applications. A hyperbranched polymer has lots of advantages such as low viscosity, high reactivity, and so on. Multireactive end groups of hyperbranched polymers are ideal for modifying natural plant fibers to achieve better interface bonding between a fiber and resin matrix. This manuscript reviews some research advances in hyperbranched-polymer-modified natural plant fibers and summarizes the applications of the modified fibers in polymer matrix composites with a particular focus on the chemical modification of fibers and interface bonding.

Advances in drug delivery, gene delivery and therapeutic agents based on dendritic materials

Dendrimers are synthetic polymers that grow in three dimensions into well-defined structures. Their morphological appearance resembles a number of trees connected by a common point. Dendritic nanoparticles have been studied for a large number of pharmaceutical and biomedical applications including gene and drug delivery, clinical diagnosis and MRI. Despite the application of dendrimers, research is still in its childhood in comparison with liposomes and other nanomaterials. They are now playing a key role in several therapeutic strategies, with dendrimer-based products in clinical trials. The aim of this review is to describe the state-of-the-art of biomedical applications of dendrimers – and dendrimer conjugates – such as drug and gene delivery and antiviral activity.

Novel waterborne UV-curable coatings based on hyperbranched polymers via electrophoretic deposition

Two modified types of hyperbranched polymer were successfully prepared using hyperbranched polyether (HBPE) as a matrix, cis-5-norbornene-endo-2,3-dicarboxylic anhydride (CDA) or o-phthalic anhydride (PA) as a modifier and by grafting an NCO-terminated compound (IPDI-HEA). The modified hyperbranched polymers were incorporated into a typical water-soluble polyacrylate (WPA) as crosslinkers to develop high-performance waterborne UV-curable coatings via electrophoretic deposition (EPD). Although the particle size of the electrophoretic dispersion increased from 43.8 nm to 164 nm, no microphase separation occurred, and the smooth SEM images of the coatings confirmed their uniformity. The rate of photopolymerization (R_p) and percentage conversion of the double bonds increased with increasing active unsaturated double bond content, and were partially affected by steric effects. Thermal gravity analysis and tensile tests indicated that the UV-curable EPD coating films exhibited better thermal stability due to their hyperbranched structure, soft and hard segment content and crosslinking density. The coated tin plate could resist chemical corrosion after immersion in NaCl solution. The coatings demonstrated strong adhesion to extremely bent tin plates and outstanding tolerance to knife-scratches and impact. This is a promising method for the design of desirable coatings in the EPD industry.

Two modified types of polymer were based on hyperbranched polyether (HBPE) and used for UV-curable EPD coatings. The properties of the coatings were analyzed from the perspective of hyperbranched structures.

Transition metal-free thiol–yne click polymerization toward Z-stereoregular poly(vinylene sulfide)s

An efficient K₃PO₄-mediated thiol–yne click polymerization was established, and regio- and stereoregular poly(vinylene sulfide)s with Z-isomers were produced.

Nanoengineered Peptide-Grafted Hyperbranched Polymers for Killing of Bacteria Monitored in Real Time via Intrinsic Aggregation-Induced Emission

Facing the global health crisis caused by drug-resistant bacteria, antimicrobial peptides and their analogues offer exciting solutions to this widespread problem. Without additionally introducing a fluorescent probe, novel nanoengineered peptide-grafted hyperbranched polymers (NPGHPs) are constructed for their combined outstanding antimicrobial activity and sensitive bacterial detection in real time. Hyperbranched polyamide amine (H-PAMAM) that exhibits aggregation-induced emission (AIE) effects is synthesized. Then, NPGHPs are prepared by ring-opening polymerization of α-amino acid N-carboxyanhydrides on the periphery of the H-PAMAM. The NPGHPs exhibit high-efficiency antibacterial properties against a wide spectrum of bacteria, especially against Gram-negative bacteria. On the basis of the AIE effect of NPGHPs, the interaction between NPGHPs and Escherichia coli is explored and the fluorescence intensity of NPGHPs is dependent on the number of E. coli present. Thus, a method for monitoring E. coli concentration is developed, and the detection limit is 1 × 10⁴ CFU mL^-1. Furthermore, NPGHPs are used as fluorescent probes to visualize antibacterial process via lighting-up bacteria. NPGHPs can penetrate the membrane of bacteria and cause cell rupture and apoptosis. In addition, the excellent selectivity of NPGHPs toward bacteria over mammalian cells makes them bright prospects for clinical applications.

Soluble Hyperbranched Porous Organic Polymers

Soluble porous organic polymers (SPOPs) are currently the subject of extensive investigation due to the enhanced processability compared to insoluble counterparts. Here, a new concept for the construction of SPOPs is presented, which combines the unique topological structure of hyperbranched polymers with rigid building blocks. By using this facile, one-step strategy, a class of novel SPOPs which possess surface areas up to 646 m² g^-1 have been synthesized. The extended π-conjugated backbone affords the polymers bright fluorescence under UV irradiation. Interestingly, after dissolution in a suitable solvent that was slowly evaporated, the polymers retain a large extent of porosity. The SPOPs are potential candidates for gas storage and separation, photovoltaic, and biological applications. In particular, due to the presence of an internal porous structure and open conformations, they show high drug loading efficiency (1.91 g of ibuprofen per gram), which is considerably higher than conventional porous organic polymers.

Precise Synthesis of Macromolecular Architectures by Novel Iterative Methodology Combining Living Anionic Polymerization with Specially Designed Linking Chemistry

This article reviews the development of a novel all-around iterative methodology combining living anionic polymerization with specially designed linking chemistry for macromolecular architecture syntheses. The methodology is designed in such a way that the same reaction site is always regenerated after the polymer chain is introduced in each reaction sequence, and this "polymer chain introduction and regeneration of the same reaction site" sequence is repeatable. Accordingly, the polymer chain can be successively and, in principle, limitlessly introduced to construct macromolecular architectures. With this iterative methodology, a variety of synthetically difficult macromolecular architectures, i.e., multicomponent μ-star polymers, high generation dendrimer-like hyperbranched polymers, exactly defined graft polymers, and multiblock polymers having more than three blocks, were successfully synthesized.

Effect of Polymer Network Architecture, Enhancing Soft Materials Using Orthogonal Dynamic Bonds in an Interpenetrating Network

Doubly dynamic polymer networks were synthesized with two distinct exchangeable cross-linkers. The first linker is highly dynamic and rapidly exchanging hydrogen bonded 2-ureido-4[1H]-pyrimidinone (UPy) and the second is a thermoresponsive furan-maleimide Diels-Alder adduct (FMI). Two network architectures were considered: an interpenetrating network (IPN) where one network is cross-linked with the UPy linker and the other is cross-linked with the FMI linker, and a single network (SN) where both the UPy and FMI linkers are in the same single network. Remarkably, the IPNs were superior to the SNs with the same composition of the UPy and FMI cross-linkers when comparing peak stress, strain at break, fracture toughness, malleability, and self-healing. Both materials studied were stable and creep resistant under ambient conditions.