One-Pot Controlled Synthesis of Homopolymers and Diblock Copolymers Grafted Graphene Oxide Using Couplable RAFT Agents

A Facile Fabrication of CdSe/ZnS QDs-Block Copolymer Brushes-Modified Graphene Oxide Nanohybrid with Temperature-Responsive Behavior

In this paper, we described a straightforward one-step chemical method for the synthesis of semiconductor quantum dots(QDs)-block copolymer brushes functionalized graphene oxide(GO) fluorescence nanohybrids. The azobenzene-terminated block copolymer poly(N-isopropylacrylamid)-b-poly(styrene-co-5-(2-methacryoylethyloxymethyl)-8-quinolinol)(PNIPAM-b-P(St-co-MQ)) was modified on the surface of GO sheets via host-guest interactions between β-cyclodextrin-modified GO and azobenzene moieties, and simultaneously CdSe/ZnS QDs were integrated on the block copolymer brushes through the coordination between 8-hydroxyquinoline units in the polymer brushes and CdSe/ZnS QDs. The resulting fluorescence nanohybrid exhibited dual photoluminescence at 620 nm and 526 nm, respectively, upon excitation at 380 nm and LCST-type thermo-responsive behavior which originated from the change in the PNIPAM conformation in the block copolymer brushes of GO sheets.

3D printed nanocomposites using polymer grafted graphene oxide prepared by multicomponent Passerini reaction

The surface of commercial graphene oxide was modified with polymers using Passerini reaction, which enhances the compatibility between nanoparticles and 3D printing resin.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

Modulating interfacial charge distribution and compatibility boosts high energy density and discharge efficiency of polymer nanocomposites

Polymer nanocomposite dielectrics, composed of polymer matrices with high breakdown strength and nanofillers with high dielectric constant, can achieve outstanding energy density. However, the great difference of intrinsic surface properties between the polymer and nanofillers will lead to poor compatibility and thus damage the dielectric properties of the composites. Introducing a transition layer to the filler surface can effectively reduce the degree of mismatch. In this work, we use a “direct in situ polymerization” method to synthesize core–shell BaTiO₃ nanoparticles (BTO_nps) with three types of stable and dense fluoro-polymer shells, e.g., poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA), poly(2,2,3,4,4,4-hexafluorobutyl methacrylate) (PHFBMA), and poly(1H,1H,7H-dodecafluoroheptyl methacrylate) (PDFHMA), and individually disperse them into the poly(vinylidene fluoride-co-hexafluoro propylene) (P(VDF-HFP)) matrix. Benefitting from the good interaction between the fluorine-containing segments in the shell polymer and the matrix segments, the dispersion of core–shell BTO_nps and their compatibility with P(VDF-HFP) are improved, which leads to a significant improvement in the dielectric properties of the nanocomposites. The results show that BTO@PDFHMA/P(VDF-HFP) composite exhibits an ultrahigh energy density of 16.8 J cm⁻³ at 609 MV m⁻¹ with particle loading amount of 15 wt%, compared to 11.5 J cm⁻³ at 492 MV m⁻¹ for a conventional solution blended BTO/P(VDF-HFP) composite. Meanwhile, the discharge efficiency is enhanced from ∼62 to ∼78%. It is elucidated that the core–shell strategy can achieve improved particle dispersion and dielectric properties. We consider that this simple method can well achieve the preparation of core–shell structures in dielectric nanocomposites.

Fluoro-polymer shells concomitantly enhance the energy density and discharge efficiency by active interactions with BTO cores and P(VDF-HFP).

Poly(glycidyl methacrylate)-coated magnetic graphene oxide as a highly efficient nanocarrier: preparation, characterization, and targeted DOX delivery

Herein, we report the preparation of novel magnetic graphene oxide grafted with brush polymer via SI-RAFT polymerization and its application as a nanocarrier for magnetic and pH-triggered delivery of DOX anticancer drug.

Mussel-inspired construction of thermo-responsive double-hydrophilic diblock copolymers-decorated reduced graphene oxide as effective catalyst supports for highly dispersed superfine Pd nanoparticles

Well-dispersed ultrafine palladium nanoparticles supported by reduced graphene oxide functionalized with catechol-terminated thermo-responsive block copolymer (PdNPs@BPrGO) were successfully constructed for highly efficient heterogeneous catalytic reduction. We first synthesized a novel temperature-responsive episulfide-containing double-hydrophilic diblock copolymer, poly(poly(ethylene glycol) methyl ether methacrylate-co-2,3-epithiopropyl methacrylate)-block-poly(N-isopropylacrylamide) (P(PEGMA-co-ETMA)-b-PNIPAM), through a reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing a chain-transfer agent with a catechol unit as the end group. The obtained block copolymers can be facilely anchored to the surface of GO via mussel-inspired chemistry. The PdNPs were loaded on GO decorated with block copolymer brushes (BPrGO) as a support via the in situ reduction of palladium precursors with the episulfide ligands of the block copolymer as a stabilizer. The resulting PdNPs@BPrGO nanohybrid catalyst had good water dispersibility and stability. Furthermore, a low dosage of PdNPs@BPrGO catalyst exhibited excellent catalytic performance in the reduction of methylene blue and nitrophenols. The performance was attributed to the ability of PdNPs@BPrGO to facilitate the diffusion of reactants compared to PdNPs@GO without polymer modification. PdNPs@BPrGO also possessed an interesting temperature-responsive catalytic property due to the reversible "coil-to-globule" phase transition behaviour of PNIPAM blocks onto the surface of catalyst. The PdNPs@BPrGO catalyst was successfully recovered and reused five times without any detectible loss in catalytic activity, demonstrating its great potential in a wide range of industrial catalytic applications.

Effect of grafted graphene nanosheets on morphology evolution and conductive behavior of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends during isothermal annealing

A facile method was developed for directly grafting poly(methyl methacrylate) (PMMA) to graphene oxide (GO) without surface modification, with the resultant insulating PMMA-g-GO nanosheets further reduced in situ to give conductive grafted reduced graphene oxide (RGO) nanosheets. The effect of PMMA-g-RGO nanosheets on the morphological evolution and conductive behavior of partially miscible blends of poly(methyl methacrylate)/poly (styrene-co-acrylonitrile) (PMMA/SAN) upon annealing above their phase-separation temperature was investigated using phase-contrast microscopy (PCM) with a real-time online digital picoammeter. With phase separation of the blend matrix, the well-dispersed PMMA-g-RGO nanosheets in the homogeneous matrix preferentially migrated to the SAN-rich phase and showed remarkably little aggregation. Surface grafting of PMMA-g-RGO might inhibit the aggregation of nanosheets in the blend matrix and weaken the retardation effect of nanosheets on the morphology evolution of the blend matrix. Furthermore, the percolation behavior of dynamic resistivity for ternary nanocomposites was attributed to the formation of a PMMA-g-RGO conductive network in the SAN-rich phase. The activation energy of conductive pathway formation was closer to the activation energy of flow for PMMA than that of SAN.

The activation energy of conductive pathway formation for PMMA/SAN/PMMA-g-RGO nanocomposites is close to that of flow for PMMA, indicating that DC percolation is mainly related to the mobility of grafted PMMA chains, rather than that of SAN chains.

Recent advances in organic–inorganic well-defined hybrid polymers using controlled living radical polymerization techniques

Controlled living radical polymerizations, such as ATRP and RAFT polymerization, could be utilized for the preparation of well-defined organic–inorganic hybrid polymers based on POSS, PDMS, silica nanoparticles, graphene, CNTs and fullerene.

A facile construction of Au nanoparticles on a copolymer ligand brushes modified graphene oxide nanoplatform with excellent catalytic properties

Au NPs were generated via in situ reduction on copolymer brush P(OEGMA-co-MQ) functionalized GO. MQ units in the brushes as capping agents could stabilize the Au NPs. The Au NPs–GO hybrid exhibited high catalytic activity for the reduction of 4-NP.

Composites of Polymer Hydrogels and Nanoparticulate Systems for Biomedical and Pharmaceutical Applications

Due to their unique structures and properties, three-dimensional hydrogels and nanostructured particles have been widely studied and shown a very high potential for medical, therapeutic and diagnostic applications. However, hydrogels and nanoparticulate systems have respective disadvantages that limit their widespread applications. Recently, the incorporation of nanostructured fillers into hydrogels has been developed as an innovative means for the creation of novel materials with diverse functionality in order to meet new challenges. In this review, the fundamentals of hydrogels and nanoparticles (NPs) were briefly discussed, and then we comprehensively summarized recent advances in the design, synthesis, functionalization and application of nanocomposite hydrogels with enhanced mechanical, biological and physicochemical properties. Moreover, the current challenges and future opportunities for the use of these promising materials in the biomedical sector, especially the nanocomposite hydrogels produced from hydrogels and polymeric NPs, are discussed.

Fluorescent graphene oxide via polymer grafting: an efficient nanocarrier for both hydrophilic and hydrophobic drugs

Functionalized graphene-based drug delivery vehicles have conquered a significant position because functionalization improves its biocompatibility and stability in cell medium, leaving sufficient graphitic basal plane for drug loading through π-π stacking. In this study, poly(N-isopropylacrylamide) (PNIPAM) is covalently grafted from the surface of graphene oxide (GO) via a facile, eco-friendly and an easy procedure of free radical polymerization (FRP) using ammonium persulfate initiator. Various spectroscopic and microscopic studies confirm the successful grafting of PNIPAM from GO surface. PNIPAM-grafted GO (GPNM) exhibits enhanced thermal stability, improved dispersibility both in aqueous and cell medium, and better biocompatibility and cell viability compared to GO. Interestingly, GPNM displays an exciting fluorescence property in aqueous medium, which is a hike of intensity at 36 °C due to the lower critical solution temperature (LCST) of PNIPAM chains (32 °C). Moreover both hydrophilic (doxorubicin (DOX)) and hydrophobic (indomethacin (IMC)) drugs loaded on the surface of GPNM hybrid exhibits its efficacy as an efficient carrier for both types of drugs. Cellular uptakes of free DOX and DOX-loaded GPNM (GPNM-DOX) are evidenced both from optical and fluorescence imaging of live cells, and the efficiency of drug is significantly improved in the loaded system. The release of DOX from GPNM-DOX was achieved at pH 4, relevant to the environment of cancer cells. The pH-triggered release of hydrophobic drug was also studied using UV-vis spectroscopy via alginate encapsulation, showing a great enhancement at pH = 7.4. The IMC is also found to be released by human serum albumin using dialysis technique. The GPNM nanomaterial shows the property of simultaneous loading of DOX and IMC as well as pH-triggered simultaneous release of both of the drugs.

Recent advances in the synthesis and applications of graphene–polymer nanocomposites

We summarize the recent advances in the modification of graphene with polymers and the synthesis and applications of high quality graphene–polymer nanocomposites.

Facile synthesis of silica nanoparticles grafted with quaternized linear, comblike and toothbrushlike copolymers

The alkoxysilane–hydroxyl coupling reaction, quaternization and RAFT polymerization were combined to synthesize three types of quaternized copolymers grafted silica with thermo-dependent surface wettability.

Chiral functionalization of graphene oxide by optically active helical-substituted polyacetylene chains and its application in enantioselective crystallization

This article reports an original, versatile strategy to chirally functionalize graphene oxide (GO) with optically active helical-substituted polyacetylene. GO was first converted into alkynyl-GO containing polymerizable -C≡C moieties, which took part in the polymerization of another chiral acetylenic monomer, yielding the expected GO hybrid covalently grafted with chiral helical polyacetylene chains. Transmission electron microscopy, atomic force microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analyses verified the successful attachment of substituted polyacetylene chains on GO by covalent chemical bonding. Moreover, circular dichroism effects and UV-vis absorption demonstrated that the GO hybrid possessed fascinating optical activity. It also largely improved the dispersibility of GO in tetrahydrofuran. The GO-derived hybrid was further used as a chiral inducer toward enantioselective crystallization of alanine enantiomers. l-Alanine was preferably induced to crystallize, forming rodlike crystals.

Nanodiamonds with Surface Grafted Polymer Chains as Vehicles for Cell Imaging and Cisplatin Delivery: Enhancement of Cell Toxicity by POEGMEMA Coating

Nanodiamonds (NDs) are highly promising drug carriers due to their biocompatibility, manipulable surface chemistry, and nonbleaching flourescence. In this communication, we compare the cytotoxicity of three ND-cisplatin systems in which cisplatin was incorporated via direct attachment to the ND surface, physical adsorption within a poly(oligo(ethylene glycol) methyl ether methacrylate) POEGMEMA surface coating, or complexation to 1,1-di-tert-butyl 3-(2-methacryloyloxy)ethyl)butane-1,1,3-tricarboxylate (MAETC) groups of a POEGMEMA-st-PMAETC surface layer. The polymer layers were introduced by grafting from RAFT-functionalized ND particles. All three ND systems displayed lower IC₅₀ values than free cisplatin in A2870 and A2870cis ovarian cancer cells. The two polymer-containing systems outperformed their "naked" counterpart, with the POEGMEMA-coated particles the most cytotoxic, displaying an IC₅₀ of 1.5 μM, more than an order of magnitude lower than that of cisplatin. The enhanced cytotoxicity is attributed to promotion of cellular uptake by the hydrophilic surface polymer.