Quantification of Intramolecular Cyclization in Branched Copolymers by 1H NMR Spectroscopy

Cytocompatible Hyperbranched Polyesters Capable of Altering the Ca2+ Signaling in Neuronal Cells In Vitro

Synthetic hyperbranched polyesters with potential therapeutic properties were synthesized using the bifunctional polyethylene glycol or PEG with different molecular weights, ca., 4000, 6000, and 20,000 g/mol, and the trifunctional trans-aconitic acid or TAA. During polycondensation, a fixed amount of PEG was allowed to react with varying amounts of TAA (1:1 and 1:3) to control the branching extents. It was found that the synthetic polyesters had a considerable yield and were highly water soluble. Spectroscopic data (Fourier transform infrared and 1H NMR) confirmed the polyester formation; the branching percentages were determined from 1H NMR spectroscopy which varied from 73% to 22% among the synthesized samples. As the molecular weight of PEG was increased, the branching percentage drastically dropped. All polyesters were found to be negatively charged due to the ionization of unreacted -COOH in the branched ends at the working pH (7.4). Both the hydrodynamic size and intrinsic viscosity were found to reduce as the branching extent increased. Among the sets of polyesters, the one with the highest branching percentage (73%) showed the core-shell morphology (evident from field emission scanning electron microscopy and transmission electron microscopy studies). It also exhibited the highest efficiency toward Ca2+ influx in neuronal cells due to the unique morphology and the negatively charged surface. Nevertheless, this particular grade of polyester along with all the other grades was cytocompatible and induced reactive oxygen species generation. Since the maximally branched grade was highly efficient in altering the Ca2+ signaling through stronger influx, it may well be tested for treating neuronal disorders in vivo in future.

Lignin precursors enhance exolaccase-started humification of bisphenol A to form functional polymers

Humification plays a significant role in converting phenolic pollutants and forming heterogeneous polymers, but few studies have been performed to investigate exolaccase-started humification (ESH). Herein, the influences of lignin precursors (LPs) on exolaccase-induced bisphenol A (BPA) removal and humification were explored. In particular, the architectural features and botanical effects of the formed humification products were also tested. ESH was extremely beneficial in boosting BPA removal in the presence of LPs. Compared with LP-free (58.49%), 100% of BPA was eliminated after the reaction with ESH for 72 h. Such a process was controlled by an exolaccase-caused random assembly of radicals, which generated a large number of hydrophobic polymers through nonspecific covalent binding of C-C and/or C-O. These humified polymers were extremely stable at pH 2.0-10.0 and -20 °C to 80 °C and displayed unique functions, i.e., scavenged 2,2-diphenyl-1-picrylhydrazyl/2,2'-azino-bis3-ethylbenzothiazoline-6-sulphonic acid radicals and exerted antioxidant capacities. More importantly, the functional polymers could act as auxin analogs to increase the germination index (>100%), plant biomass, and salt tolerance of radish seedlings. Our findings disclosed that ESH could not only be optimized to mitigate the ecological risks of phenolic pollutants and sequester organic carbon in environmental bioremediation, but the resulting abundant auxin analogs also contributed to agricultural productivity.

Step-growth polymerization by the RAFT process

Reversible Addition-Fragmentation Chain Transfer (RAFT) step-growth polymerization is an emerging method that synergistically combines the benefits of RAFT polymerization (functional group and user-friendly nature) and step-growth polymerization (versatility of the polymer backbone). This new polymerization method is generally achieved by using bifunctional reagents of monomer and Chain Transfer Agent (CTA), that efficiently yield Single Monomer Unit Insertion (SUMI) adducts under stoichiometrically balanced conditions. This review covers a brief history of the RAFT-SUMI process and its transformation into RAFT step-growth polymerization, followed by a comprehensive discussion of various RAFT step-growth systems. Furthermore, characterizing the molecular weight evolution of step-growth polymerization is elaborated based on the Flory model. Finally, a formula is introduced to describe the efficiency of the RAFT-SUMI process, assuming rapid chain transfer equilibrium. Examples of reported RAFT step-growth and SUMI systems are then categorized based on the driving force.

Gelation in Photoinduced ATRP with Tuned Dispersity of the Primary Chains

We investigated gelation in photoinduced atom transfer radical polymerization (ATRP) as a function of Cu catalyst loading and thus primary chain dispersity. Using parallel polymerizations of methyl acrylate with and without the addition of a divinyl crosslinker (1,6-hexanediol diacrylate), the approximate values of molecular weights and dispersities of the primary chains at incipient gelation were obtained. In accordance with the Flory-Stockmayer theory, experimental gelation occurred at gradually lower conversions when the dispersity of the primary chains increased while maintaining a constant monomer/initiator/crosslinker ratio. Theoretical gel points were then calculated using the measured experimental values of dispersity and initiation efficiency. An empirical modification to the Flory-Stockmayer equation for ATRP was implemented, resulting in more accurate predictions of the gel point. Increasing the dispersity of the primary chains was found not to affect the distance between the theoretical and experimental gel points and hence the extent of intramolecular cyclization. Furthermore, the mechanical properties of the networks, such as equilibrium swelling ratio and shear storage modulus showed little variation with catalyst loading and depended primarily on the crosslinking density.

Using temperature to modify the reaction conditions and outcomes of polymers formed using transfer-dominated branching radical telomerisation (TBRT)

Transfer-dominated Branching Radical Telomerisation (TBRT) enables the production of branched polymers with step-growth backbones using radical telomerisation chemistry. By conducting identical TBRTs over a broad temperature range, the role of temperature in telomer formation and branching has been evaluated. Elevated temperature limits telomer length, thereby allowing a >10% reduction in the amount of telogen required to produce near identical high molecular weight branched polymers.

Star Polymers vs. Dendrimers: Studies of the Synthesis Based on Computer Simulations

A generic model was developed for studies of the polymerization process of regular branched macromolecules. Monte Carlo simulations were performed employing the Dynamic Lattice Liquid algorithm to study this process. A core-first methodology was used in a living polymerization of stars with up to 32 arms, and dendrimers consisted of 4-functional segments. The kinetics of the synthesis process for stars with different numbers of branches and dendrimers was compared. The size and structure of star-branched polymers and dendrimers during the synthesis were studied. The influence of the functionality of well-defined cores on the structure and on the dispersity of the system was also examined. The differences in the kinetics in the formation of both architectures, as well as changes to their structures, were described and discussed.

Reversible-Addition Fragmentation Chain Transfer Step-Growth Polymerization

Reversible-addition fragmentation chain transfer (RAFT) polymerization has been widely explored since its discovery due to its structural precision, versatility, and efficiency. However, the lack of tunability of the polymer backbone limits some applications. Herein, we synergistically combine RAFT and step-growth polymerization mechanisms, by employing a highly selective insertion process of a single monomer with a RAFT agent, to achieve RAFT step-growth polymerization. A unique feature of the RAFT step-growth polymers is that each backbone repeat unit bears a pendant RAFT agent, which can subsequently graft side chains in a second polymerization step and afford molecular brush polymers. Enabled by cleavable backbone functionality, we demonstrate transformation of the resulting brushlike polymers into linear chains of uniform size upon a stimulus.

Crosslinking in Semi-Batch Seeded Emulsion Polymerization: Effect of Linear and Non-Linear Monomer Feeding Rate Profiles on Gel Formation

Waterborne latex is often called a product-of-process. Here, the effect of semi-batch monomer feed rate on the kinetics and gel formation in seeded emulsion polymerization was investigated for the copolymerization of n-butyl methacrylate (n-BMA) and ethylene glycol dimethacrylate (EGDMA). Strikingly, the gel fraction was observed to be significantly influenced by monomer feed rate, even while most of the experiments were performed under so-called starve-fed conditions. More flooded conditions from faster monomer feed rates, including seeded batch reactions, counterintuitively resulted in significantly higher gel fraction. Chain transfer to polymer was intentionally suppressed here via monomer selection so as to focus mechanistic insights to relate only to the influence of a divinyl monomer, as opposed to being clouded by contributions to topology from long chain branching. Simulations revealed that the dominant influence on this phenomenon was the sensitivity of primary intramolecular cyclization to the instantaneous unreacted monomer concentration, which is directly impacted by monomer feed rate. The rate constant for cyclization for these conditions was determined to be first order and 4000 s-1, approximately 4 times that typically observed for backbiting in acrylates. This concept has been explored previously for bulk and solution polymerizations, but not for emulsified reaction environments and especially for the very low mole fraction divinyl monomer. In addition, while gel fraction could be dramatically manipulated by variations in linear monomer feed rates, it could be markedly enhanced by leveraging non-linear feed profiles built from combination sequences of flooded and starved conditions. For a 2 h total feed time, a fully linear profile resulted in 30% gel while a corresponding non-linear profile with an early fast-feed segment resulted in 80% gel.

Complex polymer architectures through free-radical polymerization of multivinyl monomers

The construction of complex polymer architectures with well-defined topology, composition and functionality has been extensively explored as the molecular basis for the development of modern polymer materials. The unique reaction kinetics of free-radical polymerization leads to the concurrent formation of crosslinks between polymer chains and rings within an individual chain and, thus, free-radical (co)polymerization of multivinyl monomers provides a facile method to manipulate chain topology and functionality. Regulating the relative contribution of these intermolecular and intramolecular chain-propagation reactions is the key to the construction of architecturally complex polymers. This can be achieved through the design of new monomers or by spatially or kinetically controlling crosslinking reactions. These mechanisms enable the synthesis of various polymer architectures, including linear, cyclized, branched and star polymer chains, as well as crosslinked networks. In this Review, we highlight some of the contemporary experimental strategies to prepare complex polymer architectures using radical polymerization of multivinyl monomers. We also examine the recent development of characterization techniques for sub-chain connections in such complex macromolecules. Finally, we discuss how these crosslinking reactions have been engineered to generate advanced polymer materials for use in a variety of biomedical applications.

Universal Scaling Behavior during Network Formation in Controlled Radical Polymerizations

Despite the ubiquity of branched and network polymers in biological, electronic, and rheological applications, it remains difficult to predict the network structure arising from polymerization of vinyl and multivinyl monomers. While controlled radical polymerization (CRP) techniques afford modularity and control in the synthesis of (hyper)branched polymers, a unifying understanding of network formation providing grounded predictive power is still lacking. A current limitation is the inability to predict the number and weight average molecular weights that arise during the synthesis of (hyper)branched polymers using CRP. This study addresses this literature gap through first building intuition via a growth boundary analysis on how certain environmental cues (concentration, monomer choice, and cross-linker choice) affect the cross-link efficiency during network formation through experimental gel point measurements. We then demonstrate, through experimental gel point normalization, universal scaling behavior of molecular weights in the synthesis of branched polymers corroborated by previous literature experiments. Moreover, the normalization employed in this analysis reveals trends in the macroscopic mechanical properties of networks synthesized using CRP techniques. Gel point normalization employed in this analysis both enables a polymer chemist to target specific number and weight average molecular weights of (hyper)branched polymers using CRP and demonstrates the utility of CRP for gel synthesis.

Semiconductor nanocrystal-polymer hybrid nanomaterials and their application in molecular imprinting

Quantum dots (QDs) are attractive semiconductor fluorescent nanomaterials with remarkable optical and electrical properties. The broad absorption spectra and high stability of QD transducers are advantageous for sensing and bioimaging. Molecular imprinting is a technique for manufacturing synthetic polymeric materials with a high recognition ability towards a target analyte. The high selectivity of the molecularly imprinted polymers (MIPs) is a result of the fabrication process based on the template-tailored polymerization of functional monomers. The three-dimensional cavities formed in the polymer network can serve as the recognition elements of sensors because of their specificity and stability. Appending specific molecularly imprinted layers to QDs is a promising strategy to enhance the stability, sensitivity, and selective fluorescence response of the resulting sensors. By merging the benefits of MIPs and QDs, inventive optical sensors are constructed. In this review, the recent synthetic strategies used for the fabrication of QD nanocrystals emphasizing various approaches to effective functionalization in aqueous environments are discussed followed by a detailed presentation of current advances in QD conjugated MIPs (MIP-QDs). Frontiers in manufacturing of specific imprinted layers of these nanomaterials are presented and factors affecting the specific behaviour of an MIP shell are identified. Finally, current limitations of MIP-QDs are defined and prospects are outlined to amplify the capability of MIP-QDs in future sensing.

Expanding the monomer scope of linear and branched vinyl polymerisations via copper-catalysed reversible-deactivation radical polymerisation of hydrophobic methacrylates using anhydrous alcohol solvents

The use of anhydrous alcohols for Cu-catalysed reversible-deactivation radical polymerisation of a wide range of hydrophobic methacrylates has been explored in detail.

Biodegradable inorganic-organic hybrids of methacrylate star polymers for bone regeneration

Hybrids that are molecular scale co-networks of organic and inorganic components are promising biomaterials, improving the brittleness of bioactive glass and the strength of polymers. Methacrylate polymers have high potential as the organic source for hybrids since they can be produced, through controlled polymerization, with sophisticated polymer architectures that can bond to silicate networks. Previous studies showed the mechanical properties of hybrids can be modified by polymer architecture and molar mass (MM). However, biodegradability is critical if hybrids are to be used as tissue engineering scaffolds, since the templates must be remodelled by host tissue. Degradation by-products have to either completely biodegrade or be excreted by the kidneys. Enzyme, or bio-degradation is preferred to hydrolysis by water uptake as it is expected to give a more controlled degradation rate. Here, branched and star shaped poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (poly(MMA-co-TMSPMA)) were synthesized with disulphide based dimethacrylate (DSDMA) as a biodegradable branching agent. Biodegradability was confirmed by exposing the copolymers to glutathione, a tripeptide which is known to cleave disulphide bonds. Cleaved parts of the star polymer from the hybrid system were detected after 2weeks of immersion in glutathione solution, and MM was under threshold of kidney filtration. The presence of the branching agent did not reduce the mechanical properties of the hybrids and bone progenitor cells attached on the hybrids in vitro. Incorporation of the DSDMA branching agent has opened more possibilities to design biodegradable methacrylate polymer based hybrids for regenerative medicine.

STATEMENT OF SIGNIFICANCE

Bioactive glasses can regenerate bone but are brittle. Hybrids can overcome this problem as intimate interactions between glass and polymer creates synergetic properties. Implants have previously been made with synthetic polymers that degrade by water, however, they degrade catastrophically, causing rapid loss of strength. Polymers that degrade by biological agents may degrade at a more controlled rate, which should give time for tissue repair and transfer of load. Previously, hybrids made with star shaped poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (p(MMA-co-TMSPMA)) showed enhanced properties. However, methacrylates are not bio-degradable. Here, star shaped p(MMA-co-TMSPMA) was synthesized with a core that can be cleaved by glutathione, a tripeptide. On exposure to glutathione, the hybrid degraded, producing products with molecular weights below the kidney filtration threshold.

Preparation and Cross-Linking of All-Acrylamide Diblock Copolymer Nano-Objects via Polymerization-Induced Self-Assembly in Aqueous Solution

Various carboxylic acid-functionalized poly( N , N -dimethylacrylamide) (PDMAC) macromolecular chain transfer agents (macro-CTAs) were chain-extended with diacetone acrylamide (DAAM) by reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization at 70 °C and 20% w/w solids to produce a series of PDMAC-PDAAM diblock copolymer nano-objects via polymerization-induced self-assembly (PISA). TEM studies indicate that a PDMAC macro-CTA with a mean degree of polymerization (DP) of 68 or higher results in the formation of well-defined spherical nanoparticles with mean diameters ranging from 40 to 150 nm. In contrast, either highly anisotropic worms or polydisperse vesicles are formed when relatively short macro-CTAs (DP = 40-58) are used. A phase diagram was constructed to enable accurate targeting of pure copolymer morphologies. Dynamic light scattering (DLS) and aqueous electrophoresis studies indicated that in most cases these PDMAC-PDAAM nano-objects are surprisingly resistant to changes in either solution pH or temperature. However, PDMAC40-PDAAM99 worms do undergo partial dissociation to form a mixture of relatively short worms and spheres on adjusting the solution pH from pH 2-3 to around pH 9 at 20 °C. Moreover, a change in copolymer morphology from worms to a mixture of short worms and vesicles was observed by DLS and TEM on heating this worm dispersion to 50 °C. Postpolymerization cross-linking of concentrated aqueous dispersions of PDMAC-PDAAM spheres, worms, or vesicles was performed at ambient temperature using adipic acid dihydrazide (ADH), which reacts with the hydrophobic ketone-functionalized PDAAM chains. The formation of hydrazone groups was monitored by FT-IR spectroscopy and afforded covalently stabilized nano-objects that remained intact on exposure to methanol, which is a good solvent for both blocks. Rheological studies indicated that the cross-linked worms formed a stronger gel compared to linear precursor worms.

Preparation and Properties of Branched Polystyrene through Radical Suspension Polymerization

Radical solvent-free suspension polymerization of styrene with 3-mercapto hexyl-methacrylate (MHM) as the branching monomer has been carried out using 2,2'-azobisisobutyronitrile (AIBN) as the initiator to prepare branched polymer beads of high purity. The molecular weight and branching structure of the polymers have been characterized by triple detection size exclusion chromatography (TD-SEC), proton nuclear magnetic resonance spectroscopy (¹H-NMR), and Fourier transform infrared spectroscopy (FTIR). The glass transition temperature and rheological properties have been measured by using differential scanning calorimetry (DSC) and rotational rheometry. At mole ratios of MHM to AIBN less than 1.0, gelation was successfully avoided and branched polystyrene beads were prepared in the absence of any solvent. Branched polystyrene has a relatively higher molecular weight and narrower polydispersity (Mw.MALLS = 1,036,000 g·mol-1, Mw/Mn = 7.76) than those obtained in solution polymerization. Compared with their linear analogues, lower glass transition temperature and decreased chain entanglement were observed in the presently obtained branched polystyrene because of the effects of branching.

Radical polymerization in the presence of a peroxide monomer: an approach to branched vinyl polymers

In this paper, we report radical polymerization in the presence of a peroxide monomer for the preparation of branched vinyl polymers.

Gel Point Suppression in RAFT Polymerization of Pure Acrylic Cross-Linker Derived from Soybean Oil

Here we report the reversible addition-fragmentation chain transfer (RAFT) polymerization of acrylated epoxidized soybean oil (AESO), a cross-linker molecule, to high conversion (>50%) and molecular weight (>100 kDa) without macrogelation. Surprisingly, gelation is suppressed in this system far beyond the expectations predicated both on Flory-Stockmeyer theory and multiple other studies of RAFT polymerization featuring cross-linking moieties. By varying AESO and initiator concentrations, we show how intra- versus intermolecular cross-linking compete, yielding a trade-off between the degree of intramolecular linkages and conversion at gel point. We measured polymer chain characteristics, including molecular weight, chain dimensions, polydispersity, and intrinsic viscosity, using multidetector gel permeation chromatography and NMR to track polymerization kinetics. We show that not only the time and conversion at macrogelation, but also the chain architecture, is largely affected by these reaction conditions. At maximal AESO concentration, the gel point approaches that predicted by the Flory-Stockmeyer theory, and increases in an exponential fashion as the AESO concentration decreases. In the most dilute solutions, macrogelation cannot be detected throughout the entire reaction. Instead, cyclization/intramolecular cross-linking reactions dominate, leading to microgelation. This work is important, especially in that it demonstrates that thermoplastic rubbers could be produced based on multifunctional renewable feedstocks.

Direct one-pot synthesis of poly(ionic liquid) nanogels by cobalt-mediated radical cross-linking copolymerization in organic or aqueous media

Nanogels of controlled kinetic chain length were synthesized by cobalt-mediated radical cross-linking copolymerization (CMRccP) involving a vinyl monomer and a divinyl cross-linker.

Modular segmented hyperbranched copolymers

Modular segmented hyperbranched polymers, amenable to facile post-polymerization functionalization, were created via two distinct approaches.

Controllable and Reversible Dimple-Shaped Aggregates Induced by Macrocyclic Recognition Effect

A novel dimethyl acrylate 18-membered macrocycle (DMECE), acting as both bifunctional monomer and cross-linker, was designed and synthesized, and thus employed to construct a series of macrocycle-containing amphiphilic hyperbranched polymers (HBPs). The macrocyclic recognition effect between the HBPs and alkali metal ions showed that Na(+) was introduced in 1:1 interactive mode, whereas K(+) and Rb(+) were in 2:1 ratio. Through the formation of the DMECE/K(+) = 2:1 rigid "sandwich" complex of amphiphilic hyperbranched polymers, dimple-shaped aggregates were observed by TEM, SEM and AFM. Moreover, the initial concentration, the nature of solvent, the mode and affinity of the macrocyclic recognition effect as well as the amount of K(+), were essential control factors for the formation of dimple-shaped aggregates. Most importantly, the macrocyclic recognition effect endows the reversibility of the dimple-shaped aggregates and the size controllability of its circular opening, which provides a new strategy for design novel macrocycle-containing HBPs and great potential application in the field of capture and release.

Amphiphilic Polymer Conetworks Based on End-Linked "Core-First" Star Block Copolymers: Structure Formation with Long-Range Order

Amphiphilic polymer conetworks are cross-linked polymers that swell both in water and in organic solvents and can phase separate on the nanoscale in the bulk or in selective solvents. To date, however, this phase separation has only been reported with short-range order, characterized by disordered morphologies. We now report the first example of amphiphilic polymer conetworks, based on end-linked "core-first" star block copolymers, that form a lamellar phase with long-range order. These mesoscopically ordered systems can be produced in a simple fashion and exhibit significantly improved mechanical properties.

Doubly-responsive hyperbranched polymers and core-crosslinked star polymers with tunable reversibility

Thermo- and redox-responsive hyperbranched copolymers were prepared by statistical copolymerization of N-isopropylacrylamide (NIPAM) and N,N′-bis(acryloyl)cystamine (BAC) by reversible addition–fragmentation chain transfer (RAFT) polymerization.

Water soluble hyperbranched polymers from controlled radical homopolymerization of PEG diacrylate

Hyperbranched PEG-based polymers were synthesized through homopolymerization of PEG diacrylate via enhanced intermolecular branching and showed a concentration-dependent thermoresponsive property.

Facile and cost-effective branched acrylic copolymers from multifunctional comonomers and multifunctional chain transfer agents

Branched acrylic copolymers were synthesised via facile conventional free-radical polymerisations taken to high conversion using comonomers containing 2-6 acrylate functional groups and chain transfer agents containing 1-8 thiol functional groups.

Extent of intramolecular cyclization in RAFT-synthesized methacrylic branched copolymers using 13C NMR spectroscopy

The extent of intramolecular cyclization for a series of soluble branched methacrylic copolymers is determined by ¹³C NMR spectroscopy via deconvolution of oxymethylene carbon signals.

Polymerization-induced self-assembly of block copolymer nano-objects via RAFT aqueous dispersion polymerization

In this Perspective, we discuss the recent development of polymerization-induced self-assembly mediated by reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization. This approach has quickly become a powerful and versatile technique for the synthesis of a wide range of bespoke organic diblock copolymer nano-objects of controllable size, morphology, and surface functionality. Given its potential scalability, such environmentally-friendly formulations are expected to offer many potential applications, such as novel Pickering emulsifiers, efficient microencapsulation vehicles, and sterilizable thermo-responsive hydrogels for the cost-effective long-term storage of mammalian cells.

Significance of branching for transfection: synthesis of highly branched degradable functional poly(dimethylaminoethyl methacrylate) by vinyl oligomer combination

A series of degradable branched PDMAEMA copolymers were investigated with the linear PDMAEMA counterpart as gene-delivery vectors. The branched PDMAEMA copolymers were synthesized by controlled radical cross-linking copolymerization based on the "vinyl oligomer combination" approach. Efficient degradation properties were observed for all of the copolymers. The degree of branching was found to have a big impact on performance in transfection when tested on different cell types. The product with the highest degree of branching and highest degree of functionality had a superior transfection profile in terms of both transfection capability and the preservation of cell viability. These branched PDMAEMA copolymers show high potential for gene-delivery applications through a combination of the simplicity of their synthesis, their low toxicity, and their high performance.

RAFT aqueous dispersion polymerization yields poly(ethylene glycol)-based diblock copolymer nano-objects with predictable single phase morphologies

A poly(ethylene glycol) (PEG) macromolecular chain transfer agent (macro-CTA) is prepared in high yield (>95%) with 97% dithiobenzoate chain-end functionality in a three-step synthesis starting from a monohydroxy PEG₁₁₃ precursor. This PEG₁₁₃-dithiobenzoate is then used for the reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA). Polymerizations conducted under optimized conditions at 50 °C led to high conversions as judged by ¹H NMR spectroscopy and relatively low diblock copolymer polydispersities (M_w/M_n < 1.25) as judged by GPC. The latter technique also indicated good blocking efficiencies, since there was minimal PEG₁₁₃ macro-CTA contamination. Systematic variation of the mean degree of polymerization of the core-forming PHPMA block allowed PEG₁₁₃-PHPMA_x diblock copolymer spheres, worms, or vesicles to be prepared at up to 17.5% w/w solids, as judged by dynamic light scattering and transmission electron microscopy studies. Small-angle X-ray scattering (SAXS) analysis revealed that more exotic oligolamellar vesicles were observed at 20% w/w solids when targeting highly asymmetric diblock compositions. Detailed analysis of SAXS curves indicated that the mean number of membranes per oligolamellar vesicle is approximately three. A PEG₁₁₃-PHPMA_x phase diagram was constructed to enable the reproducible targeting of pure phases, as opposed to mixed morphologies (e.g., spheres plus worms or worms plus vesicles). This new RAFT PISA formulation is expected to be important for the rational and efficient synthesis of a wide range of biocompatible, thermo-responsive PEGylated diblock copolymer nano-objects for various biomedical applications.