Photochemically Mediated Atom Transfer Radical Polymerization of Methyl Methacrylate Using ppm Amounts of Catalyst

Surface Functionalization with Polymer Brushes via Surface-Initiated Atom Transfer Radical Polymerization: Synthesis, Applications, and Current Challenges

Polymer brushes have received great attention in recent years due to their distinctive properties and wide range of applications. The synthesis of polymer brushes typically employs surface-initiated atom transfer radical polymerization (SI-ATRP) techniques. To realize the control of the polymerization process in different environments, various SI-ATRP techniques triggered by different stimuli have been developed. This review focuses on the latest developments in different stimuli-triggered SI-ATRP methods, such as electrochemically mediated, photoinduced, enzyme-assisted, mechanically controlled, and organocatalyzed ATRP. Additionally, SI-ATRP technology triggered by a combination of multiple stimuli sources is also discussed. Furthermore, the applications of polymer brushes in lubrication, biological applications, antifouling, and catalysis are also systematically summarized and discussed. Despite the advancements in the synthesis of various types of 1D, 2D, and 3D polymer brushes via controlled radical polymerization, contemporary challenges remain in the quest for more efficient and straightforward synthetic protocols that allow for precise control over the composition, structure, and functionality of polymer brushes. We anticipate the readers could promote the understanding of surface functionalization based on ATRP-mediated polymer brushes and envision future directions for their application in surface coating technologies.

Photocatalytic ATRP Depolymerization: Temporal Control at Low ppm of Catalyst Concentration

A photocatalytic ATRP depolymerization is introduced that significantly suppresses the reaction temperature from 170 to 100 °C while enabling temporal regulation. In the presence of low-toxicity iron-based catalysts and under visible light irradiation, near-quantitative monomer recovery could be achieved (up to 90%), albeit with minimal temporal control. By employing ppm concentrations of either FeCl2 or FeCl3, the depolymerization during the dark periods could be completely eliminated, thus enabling temporal control and the possibility to modulate the rate by simply turning the light "on" and "off". Notably, our approach allowed preservation of the end-group fidelity throughout the reaction, could be carried out at high polymer loadings (up to 2M), and was compatible with various polymers and light sources. This methodology provides a facile, environmentally friendly, and temporally regulated route to chemically recycle ATRP-synthesized polymers, thus opening the door for further opportunities.

Comparison of Mechano- and PhotoATRP with ZnO Nanocrystals

Zinc oxide (ZnO) was previously reported as an excellent cocatalyst for mechanically controlled atom transfer radical polymerization (mechanoATRP), but its photocatalytic properties in photoinduced ATRP (photoATRP) have been much less explored. Herein, well-defined ZnO nanocrystals were prepared via microwave-assisted synthesis and applied as a heterogeneous cocatalyst in mechano- and photoATRP. Both techniques yielded polymers with outstanding control over the molecular weight, but ZnO-cocatalyzed photoATRP was much faster than analogous mechanoATRP (conversion of 91% in 1 h vs 54% in 5 h). The kinetics of photoATRP was tuned by loadings of ZnO nanocrystals. PhotoATRP with ZnO did not require any excess of ligand versus Cu, in contrast to mechanoATRP, requiring an excess of ligand, acting as a reducing agent. ZnO-cocatalyzed photoATRP proceeded controllably without prior deoxygenation, since ZnO was involved in a cascade of reactions, leading to the rapid elimination of oxygen. The versatility and robustness of the technique were demonstrated for various (meth)acrylate monomers with good temporal control and preservation of end-group functionality, illustrated by the formation of tailored block copolymers.

Cu(0)-RDRP of acrylates using an alkyl iodide initiator

In the vast majority of atom transfer radical polymerizations, alkyl bromides or alkyl chlorides are commonly employed as initiators. Herein, alkyl iodides are demonstrated as ATRP initiators.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Atom Transfer Radical Polymerization: A Mechanistic Perspective

Since its inception, atom transfer radical polymerization (ATRP) has seen continuous evolution in terms of the design of the catalyst and reaction conditions; today, it is one of the most useful techniques to prepare well-defined polymers as well as one of the most notable examples of catalysis in polymer chemistry. This Perspective highlights fundamental advances in the design of ATRP reactions and catalysts, focusing on the crucial role that mechanistic studies play in understanding, rationalizing, and predicting polymerization outcomes. A critical summary of traditional ATRP systems is provided first; we then focus on the most recent developments to improve catalyst selectivity, control polymerizations via external stimuli, and employ new photochemical or dual catalytic systems with an outlook to future research directions and open challenges.

Photoinduced Controlled/Living Polymerizations

The application of photochemistry in polymer synthesis is of interest due to the unique possibilities offered compared to thermochemistry, including topological and temporal control, rapid polymerization, sustainable low-energy processes, and environmentally benign features leading to established and emerging applications in adhesives, coatings, adaptive manufacturing, etc. In particular, the utilization of photochemistry in controlled/living polymerizations often offers the capability for precise control over the macromolecular structure and chain length in addition to the associated advantages of photochemistry. Herein, the latest developments in photocontrolled living radical and cationic polymerizations and their combinations for application in polymer syntheses are discussed. This Review summarizes and highlights recent studies in the emerging area of photoinduced controlled/living polymerizations. A discussion of mechanistic details highlights differences as well as parallels between different systems for different polymerization methods and monomer applicability.

Photoredox-Initiated Frontal Ring-Opening Metathesis Polymerization

Herein, we report the development of a photoredox-initiated frontal ring-opening metathesis polymerization (FROMP) chemical system. We found that a ruthenium-based, bis-N-heterocyclic carbene metathesis precatalyst was activated with 9-mesityl-10-phenylacridindium tetrafluoroborate, copper(II) triflate, and a 455 nm light source. This chemistry was used to initiate the FROMP of dicyclopentadiene; once initiated, the heat released from the polymerization sustained a well-controlled reaction front. Variation in copper or metathesis precatalyst loading yielded front speeds ranging from 0.15 to 0.43 mm s^-1 and front temperatures ranging from 140 to 205 °C. While the glass transition temperatures of the resultant polymers are lower than those derived with Grubbs' second-generation catalyst, this chemical system provides extended pot life.

Ultrafast Visible-Light-Induced ATRP in Aqueous Media with Carbon Quantum Dots as the Catalyst and Its Application for 3D Printing

Photoinduced atom transfer radical polymerization (ATRP) has been proved to be a versatile technique for polymer network formation. However, the slow polymerization rates of typical ATRP limited its application in the field of additive manufacturing (3D printing). In this work, we introduced carbon quantum dots (CQDs) for the first time to the ATRP in aqueous media and developed an ultrafast visible-light-induced polymerization system. After optimization, the polymerization could achieve a high monomer conversion (>90%) within 1 min, and the polydispersity index (PDI) of the polymer was lower than 1.25. This system was then applied as the first example of ATRP for the 3D printing of hydrogel through digital light processing (DLP), and the printed object exhibited good dimensional accuracy. Additionally, the excellent and stable optical properties of CQDs also provided interesting photoluminescence capabilities to the printed objects. We deduce this ATRP mediated 3D printing process would provide a new platform for the preparation of functional and stimuli-responsive hydrogel materials.

Simple Full-Spectrum Heterogeneous Photocatalyst for Photo-induced Atom Transfer Radical Polymerization (ATRP) under UV/vis/NIR and its Application for the Preparation of Dual Mode Curing Injectable Photoluminescence Hydrogel

The utilizing light with broadband range has attracted lots of research interest for the photo induced reversible-deactivation radical polymerization (RDRP). However, it is still a challenge for a single catalyst to simultaneously respond to various lights with highly varied wavelengths. Here, we proposed a simple strategy for the preparation of a heterogeneous photocatalyst suitable for photo induced atom transfer radical polymerization (photoATRP) under full spectrum (from UV/vis light to NIR), by combining pyridine nitrogen doped carbon dots (N-CDs) and upconversion nanoparticles (UCNPs). In the presence of these robust UCNP@SiO₂@N-CDs composite particles, the photoATRP could be carried on under the different irradiations of UV, blue, green, red, white, and 980 nm NIR light, with a low loading of part per million concentrations of the CuBr₂/L catalyst. Moreover, the excellent solvent and aqueous compatibility allow UCNP@SiO₂@N-CDs to be capable for photoATRP in both organic solvents and aqueous media, providing well-defined hydrophobic and hydrophilic polymers with low dispersity and excellent chain-end fidelity. In addition, the photoATRP with 980 nm NIR exhibited excellent penetrations through visible-light-proof barriers. The system could be used for the preparation of an injectable hydrogel that had dual curing and photoluminescence modes. Owing to the "living" characteristics of polymer chains achieved through ATRP, the hydrogel was capable to be easily repaired by using monomer as the binder.

Red-Light-Induced, Copper-Catalyzed Atom Transfer Radical Polymerization

Despite advances in photochemical atom transfer radical polymerization (photoATRP), these systems often rely on the use of UV light for the activation/generation of the copper-based catalytic species. To circumvent the problems associated with the UV light, we developed a dual photoredox catalytic system to mediate photoinduced ATRP under red-light irradiation. The catalytic system is comprised of a Cu catalyst to control the polymerization via ATRP equilibrium and a photocatalyst, such as zinc(II) tetraphenylporphine or zinc(II) phthalocyanine, to generate the activator Cu^I species under red-light irradiation. In addition, this system showed oxygen tolerance due to the consumption of oxygen in the photoredox reactions, yielding well-controlled polymerizations without the need for deoxygenation processes.

A New Protocol for Ash Wood Modification: Synthesis of Hydrophobic and Antibacterial Brushes from the Wood Surface

The article presents the modification of ash wood via surface initiated activators regenerated by electron transfer atom transfer radical polymerization mediated by elemental silver (Ag⁰ SI-ARGET ATRP) at a diminished catalyst concentration. Ash wood is functionalized with poly(methyl methacrylate) (PMMA) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) to yield wood grafted with PMMA-b-PDMAEMA-Br copolymers with hydrophobic and antibacterial properties. Fourier transform infrared (FT-IR) spectroscopy confirmed the covalent incorporation of functional ATRP initiation sites and polymer chains into the wood structure. The polymerization kinetics was followed by the analysis of the polymer grown in solution from the sacrificial initiator by proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC). The polymer layer covalently attached to the wood surface was observed by scanning electron microscopy (SEM). The hydrophobic properties of hybrid materials were confirmed by water contact angle measurements. Water and sodium chloride salt aqueous solution uptake tests confirmed a significant improvement in resistance to the absorption of wood samples after modification with polymers. Antibacterial tests revealed that wood-QPDMAEMA-Br, as well as wood-PMMA-b-QPDMAEMA-Br, exhibited higher antibacterial activity against Gram-positive bacteria (Staphylococcus aureus) in comparison with Gram-negative bacteria (Escherichia coli). The paper presents an economic concept with ecological aspects of improving wood properties, which gives great opportunities to use the proposed approach in the production of functional hybrid materials for industry and high quality sports equipment, and in furniture production.

Expanding monomer scope and enabling post-modification in photocontrolled radical ring-opening polymerization of vinylcyclopropanes by an iodine transfer strategy

Visible light-driven iodine transfer polymerization provides efficient and unique access to novel poly(vinylcyclopropanes) with enhanced material properties.

Open-air green-light-driven ATRP enabled by dual photoredox/copper catalysis

Photoinduced atom transfer radical polymerization (photo-ATRP) has risen to the forefront of modern polymer chemistry as a powerful tool giving access to well-defined materials with complex architecture. However, most photo-ATRP systems can only generate radicals under biocidal UV light and are oxygen-sensitive, hindering their practical use in the synthesis of polymer biohybrids. Herein, inspired by the photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization, we demonstrate a dual photoredox/copper catalysis that allows open-air ATRP under green light irradiation. Eosin Y was used as an organic photoredox catalyst (PC) in combination with a copper complex (X–Cu^II/L). The role of PC was to trigger and drive the polymerization, while X–Cu^II/L acted as a deactivator, providing a well-controlled polymerization. The excited PC was oxidatively quenched by X–Cu^II/L, generating Cu^I/L activator and PC˙⁺. The ATRP ligand (L) used in excess then reduced the PC˙⁺, closing the photocatalytic cycle. The continuous reduction of X–Cu^II/L back to Cu^I/L by excited PC provided high oxygen tolerance. As a result, a well-controlled and rapid ATRP could proceed even in an open vessel despite continuous oxygen diffusion. This method allowed the synthesis of polymers with narrow molecular weight distributions and controlled molecular weights using Cu catalyst and PC at ppm levels in both aqueous and organic media. A detailed comparison of photo-ATRP with PET-RAFT polymerization revealed the superiority of dual photoredox/copper catalysis under biologically relevant conditions. The kinetic studies and fluorescence measurements indicated that in the absence of the X–Cu^II/L complex, green light irradiation caused faster photobleaching of eosin Y, leading to inhibition of PET-RAFT polymerization. Importantly, PET-RAFT polymerizations showed significantly higher dispersity values (1.14 ≤ Đ ≤ 4.01) in contrast to photo-ATRP (1.15 ≤ Đ ≤ 1.22) under identical conditions.

Fully oxygen-tolerant photoinduced atom transfer radical polymerization (photo-ATRP) allowed the synthesis of well-defined polymers using a Cu catalyst and eosin Y at ppm levels in both aqueous and organic media.

Silicon quantum dot (SQD)-catalyzed visible-light-induced ATRP and its application in controlled surface modification

SiQD-catalyzed visible light induced ATRP provides not only good control of polymerization, but also has the potential for application in controlled surface modification through surface grafting photoATRP (SG-ATRP) with the assistance of MPS.

Applications of Halogen-Atom Transfer (XAT) for the Generation of Carbon Radicals in Synthetic Photochemistry and Photocatalysis

The halogen-atom transfer (XAT) is one of the most important and applied processes for the generation of carbon radicals in synthetic chemistry. In this review, we summarize and highlight the most important aspects associated with XAT and the impact it has had on photochemistry and photocatalysis. The organization of the material starts with the analysis of the most important mechanistic aspects and then follows a subdivision based on the nature of the reagents used in the halogen abstraction. This review aims to provide a general overview of the fundamental concepts and main agents involved in XAT processes with the objective of offering a tool to understand and facilitate the development of new synthetic radical strategies.

Antibacterial cotton fabric prepared by surface-initiated photochemically induced atom transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate with subsequent quaternization

Antibacterial highly grafted cotton fabric with good laundry resistance was prepared using photoATRP in the presence of air.

A Schiff base ligand for photoinduced atom transfer radical polymerization

A claw-type Schiff base, tris[N-(2-pyridylmethyl)-2-iminoethyl]amine (Py₃Tren), is used as an active ligand for photoinduced atom transfer radical polymerization (Photo-ATRP).

A covalent organic framework as a photocatalyst for atom transfer radical polymerization under white light irradiation

TFPPy-Td-COFs have been synthesized to serve as heterogeneous photocatalysts for mediating photo-induced ATRP with copper as a co-catalyst under white light irradiation.

Effect of nitrogen type on carbon dot photocatalysts for visible-light-induced atom transfer radical polymerization

N-Doping significantly enhanced the photo-activity of carbon dots. But only pyridinic N can improved the activity of CDs as catalysts for photo-induced ATRP, compared with pyrrolic N and graphitic N.

Metal-Free ATRP Catalyzed by Visible Light in Continuous Flow

ATRP of methyl methacrylate catalyzed by Eosin Y, an inexpensive and an environmental benign dye, was performed in a continuous flow reactor made of FEP tubing and irradiated by visible light green LEDs. The reaction under flow conditions was significantly more rapid and controlled compared to that in batch giving 90% of polymerization after only 3 h of irradiation. The formed polymers in flow have M n measured by GPC and DOSY NMR in accordance with the theoretical values and show low dispersities (Ð < 1.5). The livingness of the polymers has been confirmed by LED on and LED off experiments and by the synthesis of block copolymers. The protocol described herein serves as a "proof of concept" of using Eosin Y as a photocatalyst for controlled polymerization and of using 1D and 2D NMR for polymer characterization. The protocol could be replicated in the future for other reversible-deactivation radical polymerizations.

Role of External Field in Polymerization: Mechanism and Kinetics

The past decades have witnessed an increasing interest in developing advanced polymerization techniques subjected to external fields. Various physical modulations, such as temperature, light, electricity, magnetic field, ultrasound, and microwave irradiation, are noninvasive means, having superb but distinct abilities to regulate polymerizations in terms of process intensification and spatial and temporal controls. Gas as an emerging regulator plays a distinctive role in controlling polymerization and resembles a physical regulator in some cases. This review provides a systematic overview of seven types of external-field-regulated polymerizations, ranging from chain-growth to step-growth polymerization. A detailed account of the relevant mechanism and kinetics is provided to better understand the role of each external field in polymerization. In addition, given the crucial role of modeling and simulation in mechanisms and kinetics investigation, an overview of model construction and typical numerical methods used in this field as well as highlights of the interaction between experiment and simulation toward kinetics in the existing systems are given. At the end, limitations and future perspectives for this field are critically discussed. This state-of-the-art research progress not only provides the fundamental principles underlying external-field-regulated polymerizations but also stimulates new development of advanced polymerization methods.

Effects of various Cu(0), Fe(0), and proanthocyanidin reducing agents on Fe(iii)-catalysed ATRP for the synthesis of PMMA block copolymers and their self-assembly behaviours

Well-defined PMMA, PMMA-b-PBzMA and PMMA-b-PBMA polymers were obtained via green Fe-ATRP with the aid of proanthocyanidins. Interestingly, microphase separation was observed in PMMA-b-PBMA polymer with upper critical ordering temperature behaviour.

Visible-light-induced controlled radical polymerization of methacrylates mediated by zirconium-porphryinic metal–organic frameworks

Visible-light-induced controlled radical polymerization of methacrylates by using zirconium-porphryinic metal–organic frameworks.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

Controlling Polymer Composition in Organocatalyzed Photoredox Radical Ring-Opening Polymerization of Vinylcyclopropanes

Although radical polymerizations are among the most prevalent methodologies for the synthesis of polymers with diverse compositions and properties, the intrinsic reactivity and selectivity of radical addition challenge the ability to impart control over the polymerization propagation and produce polymers with defined microstructure. Vinylcyclopropanes (VCPs) can be polymerized through radical ring-opening polymerization to produce polymers possessing linear (l) or cyclic (c) repeat units, providing the opportunity to control polymer structure and modify the polymer properties. Herein, we report the first organocatalyzed photoredox radical ring-opening polymerization of a variety of functionalized VCP monomers, where high monomer conversions and spatial and temporal control were achieved to produce poly(VCPs) with predictable molecular weight and low dispersity. Through manipulating polymerization concentration and temperature, tunable l or c content was realized, allowing further investigation of thermal and viscoelastic materials properties associated with these two distinct compositions. Unexpectedly, the photoredox catalysis enables a postpolymerization modification that converts l content into the c content. Combined experimental and computational studies suggested an intramolecular radical cyclization pathway, where cyclopentane and cyclohexane repeat units are likely formed.

Guanidine as inexpensive dual function ligand and reducing agent for ATRP of methacrylates

N,N,N′,N′-Tetramethyl guanidine, an inexpensive and commercially available organic base, is used for the first time as ligand without any chemical modification for the supplemental activator and reducing agent atom transfer radical polymerization.