Application of (1)H DOSY for Facile Measurement of Polymer Molecular Weights

Antimicrobial starch-based cryogels and hydrogels for dual-active food packaging applications

The present study reports on the valorisation of starch waste biomass to produce dual-active cryogels and hydrogels able to adsorb water and deliver antimicrobial substances for fresh food packaging applications. Starch hydrogels were prepared by oxidation with sodium metaperiodate in water and mild conditions, while cryogels were obtained by freeze-drying process. To explore the role of starch composition on the final properties of materials, two starches differing in amylose/amylopectin ratio, were evaluated. The prepared materials were microstructurally and morphologically characterized by FTIR and NMR spectroscopy (1D, 2D, and DOSY experiments), and SEM microscopy. To provide the materials with active properties, they were loaded with antimicrobial molecules by absorption, or by crosslinking via Schiff-base reaction. All materials demonstrated high water absorption capacity and ability to deliver volatile molecules, including diacetyl and complex mixtures like mint essential oil. The release profiles of the adsorbed molecules were determined through quantitative NMR spectroscopy over time. The antibacterial activity was successfully demonstrated against Gram-positive bacterial strains for unloaded cryogels and hydrogels, and after loading with diacetyl and essential oil. The developed materials can be regarded as part of active pads for food packaging applications capable to control moisture inside the package and inhibit microbial contamination.

Real-Time Determination of Molecular Weight: Use of MaDDOSY (Mass Determination Diffusion Ordered Spectroscopy) to Monitor the Progress of Polymerization Reactions

Knowledge of molecular weight is an integral factor in polymer synthesis, and while many synthetic strategies have been developed to help control this, determination of the final molecular weight is often only measured at the end of the reaction. Herein, we provide a technique for the online determination of polymer molecular weight using a universal, solvent-independent diffusion ordered spectroscopy (DOSY) calibration and evidence its use in a variety of polymerization reactions.

Manganese catalysed dehydrocoupling of silanes and siloxanes with ammonia to prepare oligosilazanes and polysiloxazanes

The halogen-free synthesis of oligosilazanes has been observed upon dehydrocoupling silanes with ammonia at 25 °C using [(2,6-iPr2PhBDI)Mn(μ-H)]2. Extending this methodology to polymethylhydrosiloxanes afforded thermally robust polysiloxazane solids, and the dehydrocoupling of 1,3,5,7-tetramethylcyclotetrasiloxane with ammonia afforded a polysiloxazane having a weight-average molecular weight of 4300 g mol-1. A representative oligosilazane has been applied to a copper surface and found to afford a 20 μm thick coating that resists corrosion after 24 h under water. Addition of ammonia to [(2,6-iPr2PhBDI)Mn(μ-H)]2 allowed for characterization of the catalyst resting state, [(2,6-iPr2PhBDI)Mn(μ-NH2)]2, which has been found to mediate Si-N dehydrocoupling.

Extreme dependence of dynamics on concentration in highly crowded polyelectrolyte solutions

Charge-carrying species, such as polyelectrolytes, are vital to natural and synthetic processes that rely on their dynamic behavior. Through single-particle tracking techniques, the diffusivity of individual polyelectrolyte chains and overall system viscosity are determined for concentrated polylysine solutions. These studies show scaling dependences of D ~ c-6.1 and η ~ c7.2, much stronger than theoretical predictions, drawing the applicability of power law fits into question. Similar trends are observed in concentrated solutions prepared at various pH and counterion conditions. These hindered system dynamics appear universal to polyelectrolyte systems and are attributed to the large effective excluded volumes of polyelectrolyte chains inducing glassy dynamics. The framework of the Vrentas-Duda free-volume theory is used to compare polyelectrolyte and neutral systems. Supported by this theory, excluding counterion mass from total polymer mass results in all environmental conditions collapsing onto a common trendline. These results are applicable to crowded biological systems, such as intracellular environments where protein mobility is strongly inhibited.

Micro(nano)plastics from synthetic oligomers persisting in Mediterranean seawater: Comprehensive NMR analysis, concerns and origins

The presence in seawater of low-molecular-weight polyethylene (PE) and polydimethylsiloxane (PDMS), synthetic polymers with high chemical resistance, has been demonstrated in this study for the first time by developing a novel methodology for their recovery and quantification from surface seawater. These synthetic polymer debris (SPD) with very low molecular weights and sizes in the nano- and micro-metre range have escaped conventional analytical methods. SPD have been easily recovered from water samples (2 L) through filtration with a nitrocellulose membrane filter with a pore size of 0.45 μm. Dissolving the filter in acetone allowed the isolation of the particulates by centrifugation followed by drying. The isolated SPD were analysed by 1H nuclear magnetic resonance spectroscopy (1H NMR), identifying PE and PDMS. These polymers are thus persisting on seawater because of their low density and the ponderal concentrations were quantified in mg/m3. This method was used in an actual case study in which 120 surface seawater samples were collected during two sampling campaigns in the Mediterranean Sea (from the Gulf of Salerno to the Gulf of Policastro in South Italy). The developed analytical protocol allowed achieving unprecedented simplicity, rapidity and sensitivity. The 1H and 13C NMR structural analysis of the PE debris indicates the presence of oxidised polymer chains with very low molecular weights. Additionally, the origin of those low molecular weight polymers was investigated by analysing influents and effluents from a wastewater treatment plant (WWTP) in Salerno as a hot spot for the release of SPD: the analysis indicates the presence of low molecular weight polymers compatible with wax-PE, widely used for coating applications, food industry, cosmetics and detergents. Moreover, the origin of PDMS debris found in surface seawater can be ascribed to silicone-based antifoamers and emulsifiers.

MaDDOSY (Mass Determination Diffusion Ordered Spectroscopy) using an 80 MHz Bench Top NMR for the Rapid Determination of Polymer and Macromolecular Molecular Weight

Measurement of molecular weight is an integral part of macromolecular and polymer characterization which usually has limitations. Herein, this article presents the use of a bench-top 80 MHz Nuclear Magnetic Resonance (NMR) spectrometer for diffusion-ordered spectroscopy as a practical and rapid approach for the determination of molecular weight/size using a novel solvent and polymer-independent universal calibration.

Characterization by Gel Permeation Chromatography of the Molecular Weight of Supramolecular Polymers Generated by Forming Polyrotaxanes through the Introduction of External Stoppers

Supramolecular polymers find wide applications across diverse domains, and the molecular weight exerts a critical influence on their applicability. Consequently, the measurement of molecular weight for supramolecular polymers assumes paramount significance. Gel Permeation Chromatography (GPC) requiring low-concentration condition is a common characterization employed for molecular weight determination, which is not suitable for supramolecular polymers possessing concentration-independence property. Here, to break this threshold, we synthesized M1 embodying dibenzo-24-crown-8 (DB24C8) moiety as well as dibenzylammonium salt (DBA) group, which was capable of self-assembling into supramolecular polymers terminated with aldehyde groups at its end. Upon the addition of (4- (1,2,2-Triphenylvinyl) phenyl) methylamine (TPE-NH2), supramolecular polymers underwent a transition into polyrotaxanes, for which it was led by the generation of imine bonds. By virtue of GPC, the molecular weight of polyrotaxanes was obtained, then it was available to gain the molecular weight of supramolecular polymers with the help of transformation efficiency.

Correlating structural changes in thermoresponsive hydrogels to the optical response of embedded plasmonic nanoparticles

Stimuli-responsive microgels, composed of small beads with soft, deformable polymer networks swollen through a combination of synthetic control over the polymer and its interaction with water, form a versatile platform for development of multifunctional and biocompatible sensors. The interfacial structural variation of such materials at a nanometer length scale is essential to their function, but not yet fully comprehended. Here, we take advantage of the plasmonic response of a gold nanorod embedded in a thermoresponsive microgel (AuNR@PNIPMAm) to monitor structural changes in the hydrogel directly near the nanorod surface. By direct comparison of the plasmon response against measurements of the hydrogel structure from dynamic light scattering and nuclear magnetic resonance, we find that the microgel shell of batch-polymerized AuNR@PNIPMAm exhibits a heterogeneous volume phase transition reflected by different onset temperatures for changes in the hydrodyanmic radius (RH) and plasmon resonance, respectively. The new approach of contrasting plasmonic response (a measure of local surface hydrogel structure) with RH and relaxation times paves a new path to gain valuable insight for the design of plasmonic sensors based on stimuli-responsive hydrogels.

The Universal Calibration for Structure- and Solvent-Independent Molar Mass Determinations of Polymers Using Diffusion-Ordered Spectroscopy

It will be shown how diffusion-ordered spectroscopy (DOSY) can produce a universal calibration of molar mass dependences of polymers compared to size exclusion chromatography (SEC) or recently published DOSY methods. Whereas SEC can deliver only structure-independent universal calibrations for a particular solvent, DOSY was used for creating solvent-independent calibrations for a certain polymer. Now, we can demonstrate a universal calibration method that generates both a structure- and solvent-independent molar mass calibration. Only one mathematical function describes the structure- and solvent-independent calibrations for DOSY by implementing the Mark-Houwink approach. The derived equation is tested on polystyrene (PS), poly(ethylene oxide), and poly(methyl methacrylate) of different molar masses and in different solvents. Altogether, 94 diffusion coefficients representing 16 molar mass calibrations of the diffusion coefficients in 10 different solvents could be perfectly matched to one universal calibration function with an average deviation of just 2.5%. It was also found that the Mark-Houwink parameters calculated by DOSY are very close to the SEC data. In any case, this new approach is a very useful tool for the determination of molar masses and new Mark-Houwink parameters via DOSY.

Synthesis and Conformational Behaviors of Unnatural Peptides Alternating Chiral and Achiral α,α-Disubstituted α-Amino Acid Units

The development of peptidomimetics to modulate the conformational profile of peptides has been extensively studied in the fields of biological and medicinal chemistry. However, large-scale synthesis of peptidomimetics with both an ordered sequence and a controlled secondary structure is highly challenging. In this paper, the framework of peptidomimetics has been designed to be alternating an achiral α,α-disubstituted α-amino acid unit and a chiral α-methylphenylalanine unit. The polymers are synthesized via invented Ugi reaction-based polycondensation technique. The chiral higher-order structures of the alternating peptides are evaluated mainly through circular dichroism (CD) spectroscopy. The UV-Vis and CD spectra of the polymers in three solvents are systematically measured at various temperatures. The anisotropic factors of CD (gCD ) values are calculated to know the chiroptical response. The results indicate the characteristic conformational behaviors. In a polar solvent, the hydrogen bonds between the N-H group of MePhe unit and the C=O of α,α-diphenylglycine unit outweigh the intraresidue hydrogen bonds in α,α-diphenylglycine unit, leading to the formation of a prevailing preferred-handed 310 -helical conformation. On the other hand, in a less polar solvent, the intrachain hydrogen bonds switch to intraresidue hydrogen bonds in α,α-diphenylglycine unit, which make the polymer adopting a prevailing extended planar C5 -conformation.

Development of a Ratiometric Fluorescent Cu(II) Indicator Based on Poly(N-isopropylacrylamide) Thermal Phase Transition and an Aminopyridyl Cu(II) Ligand

An aqueous Cu2+ and Zn2+ indicator is reported based on copolymerizing aminopyridine ligands and the environment-sensitive dansyl fluorophore into the responsive polymer poly(N-isopropylacrylamide) (PNIPAm). The metal ion binding creates charge and solvation that triggers PNIPAm's thermal phase transition from hydrophobic globule to hydrophilic open coil. As a basis for sensing the metal-binding, the dansyl fluorescence emission spectra provide a signal at ca. 530 nm and a signal at 500 nm for the hydrophobic and hydrophilic environment, respectively, that are ratiometrically interpreted. The synthesis of the title pyridylethyl-pyridylmethyl-amine ligand (acronym PEPMA) with a 3-carbon linker to the copolymerizable group, aminopropylacrylamide (PEPMA-C3-acrylamide), is reported, along with a nonpolymerizable model ligand derivative. The response of the polymer is validated by increasing temperature from 25 °C to 49 °C, which causes a shift in maximum emission wavelength from 536 nm to 505 nm, along with an increase in the ratio of emission intensity of 505 nm/536 nm from 0.77 to 1.22 (λex = 330 nm) as the polymer releases water. The addition of divalent Cu or Zn to the indicator resulted in a dansyl emission shift of 10 nm to a longer wavelength, accompanied by fluorescence quenching in the case of Cu2+. The addition of EDTA to the Cu2+-loaded indicator reversed the fluorescence shift at 25 °C to 35 °C. The affinities of Cu2+ and Zn2+ for the PEPMA derivatives are log Kf = 11.85 and log Kf = 5.67, respectively, as determined by potentiometric titration. The single-crystal X-ray structure of the Cu2+-PEPMA derivative is five-coordinate, of-geometry intermediate between square-pyramidal and trigonal-bipyramidal, and is comparable to that of Cu2+ complexes with similar formation constants.

Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion

The objective of this work is to evaluate the reprocessing of PLA 3D printing waste from different origins, into filaments and films, and without the addition of any additive. Two types of waste were considered: a blend of different printing wastes (masks, visors, other components) of personal protective equipment coming from an association of Spanish coronamakers, and PLA waste from a single known commercial source. Both types of materials were subjected to repeated extrusion cycles and processed into films by compression molding. Samples were characterized after each cycle and their mechanical and viscosity properties evaluated. Diffusion-ordered NMR spectroscopy (DOSY) experiments were also carried out to estimate molecular weights. The results show a better performance for the PLA waste from the known origin, capable of withstanding up to three re-extrusion cycles per two for the waste blending, without significant degradation. Additionally, a model to address collection and mechanical recycling cycles under two different scenarios (full traceability and not full traceability) was proposed.

Cu(triNHC)-catalyzed polymerization of glycidol to produce ultralow-branched polyglycerol

We have successfully synthesized a novel form of polyglycerol with an unprecedentedly low degree of branching (DB = 0.08-0.18), eliminating the need for glycidol protection. Leveraging the remarkable efficiency and selectivity of our Cu(triNHC) catalyst, comprising copper(i) ions and NHC ligands, we achieved a highly selective polymerization process. The proposed Cu-coordination mechanisms presented the formation of linear L1,3 units while effectively suppressing dendritic units. Consequently, our pioneering approach yielded polyglycerol with an ultralow DB and exceptional yields. To comprehensively assess the physical properties and topology of the synthesized polyglycerol, we employed 1H diffusion-ordered spectroscopy, size-exclusion chromatography, and matrix-assisted laser desorption/ionization-time of flight spectrometry. Remarkably, the ultralow-branched cyclic polyglycerol (DB = 0.08) synthesized at 0 °C showcased extraordinary characteristics, exhibiting the lowest diffusion coefficient and the highest molecular weight. This achievement establishes the significant potential of our polyglycerol with a low degree of branching, revolutionizing the field of biocompatible polymers.

Polymer Molecular Weights via DOSY NMR

Diffusion-ordered spectroscopy (DOSY) ¹H nuclear magnetic resonance (¹H NMR) has become a powerful tool to characterize the molecular weights of polymers. Compared to common characterization techniques, such as size exclusion chromatography (SEC), DOSY is faster, uses less solvent, and does not require a purified polymer sample. Poly(methyl methacrylate) (PMMA), polystyrene (PS), and polybutadiene (PB) molecular weights were determined by the linear correlation between the logarithm of their diffusion coefficients (D) and the logarithm of their molecular weights based on SEC molecular weights. Here, we emphasize the importance of the preparation needed to generate the calibration curves, which includes choosing the correct pulse sequence, optimizing parameters, and sample preparation. The limitation of the PMMA calibration curve was investigated by increasing the dispersity of PMMA. Additionally, by accounting for viscosity in the Stokes-Einstein equation, a variety of solvents were used to produce a "universal" calibration curve for PMMA to determine molecular weight. Furthermore, we place a spotlight on the increasing importance of DOSY NMR being incorporated into the polymer chemist's toolbox.

Planar bismuth triamides: a tunable platform for main group Lewis acidity and polymerization catalysis

Geometric deformation in main group compounds can be used to elicit unique properties including strong Lewis acidity. Here we report on a family of planar bismuth(iii) complexes (cf. typically pyramidal structure for such compounds), which show a geometric Lewis acidity that can be further tuned by varying the steric and electronic features of the triamide ligand employed. The structural dynamism of the planar bismuth complexes was probed in both the solid and solution phase, revealing at least three distinct modes of intermolecular association. A modified Gutmann-Beckett method was used to assess their electrophilicity by employing trimethylphosphine sulfide in addition to triethylphosphine oxide as probes, providing insights into the preference for binding hard or soft substrates. Experimental binding studies were complemented by a computational assessment of the affinities and dissection of the latter into their intrinsic bond strength and deformation energy components. The results show comparable Lewis acidity to triarylboranes, with the added ability to bind two bases simultaneously, and reduced discrimination against soft substrates. We also study the catalytic efficacy of these complexes in the ring opening polymerization of cyclic esters ε-caprolactone and rac-lactide. The polymers obtained show excellent dispersity values and high molecular weights with low catalyst loadings used. The complexes retain their performance under industrially relevant conditions, suggesting they may be useful as less toxic alternatives to tin catalysts in the production of medical grade materials. Collectively, these results establish planar bismuth complexes as not only a novel neutral platform for main group Lewis acidity, but also a potentially valuable one for catalysis.

Synthesis of Supramolecular A8 Bn Miktoarm Star Copolymers by Host-Guest Complexation

We report a new synthetic method to construct supramolecular A₈ B_n (n=1, 2, 4) miktoarm star copolymers by host-guest complexation between a resorcinarene-based coordination capsule possessing eight polystyrene chains and 4,4-diacetoxybiphenyl guest molecules that retain one, two or four polymethyl acrylate chains. The formation of the supramolecular A₈ B_n (n=1, 2, 4) miktoarm star copolymers was confirmed by dynamic light scattering (DLS), size-exclusion chromatography (SEC), and diffusion-ordered NMR spectroscopy (DOSY). Differential scanning calorimetry (DSC) measurements revealed that the miktoarm copolymers were phase-separated in the bulk. The micro-Brownian motion of the A₈ B₄ structure was markedly enhanced in the bulk due to a weak segregation interaction between the immiscible arms.

A Robust, Divalent, Phosphaza-bicyclo[2.2.2]octane Connector Provides Access to Cage-Dense Inorganic Polymers and Networks

While polymers containing chain or ring motifs in their backbone are ubiquitous, those containing well-defined molecular cages are very rare and essentially unknown for the inorganic elements. We report that a rigid and dinucleophilic cage (PNSiMe₃)₂(NMe)₆, which is chemically robust and accessible on a multi-gram scale from commercial precursors, serves as a linear and divalent connector that forms cage-dense inorganic materials. Reaction of the cage with various ditopic P(III) dihalide comonomers proceeded via Me₃SiCl elimination to give high molecular weight (30 000-70 000 g mol^-1), solution-processable polymers that form free-standing films. The end groups of the polymers could be tuned to engender orthogonal reactivity and form block copolymers. Networked cage-dense materials could be accessed by using PCl₃ as a tritopic P(III) linker. Detailed mechanistic studies implicate a stepwise polycondensation that proceeds via phosphino-phosphonium ion intermediates, prior to Me₃SiCl loss. Thus, metathesis between the dinucleophilic cage and polyhalides represents a general strategy to making cage-dense polymers, setting the stage for systematically understanding the consequences of the three-dimensional microstructure on macroscopic material properties.

1H DOSY analysis of high molecular weight acrylamide-based copolymer electrolytes using an inverse-geometry diffusion probe

Copolymers of [2-(acryloyloxy)ethyl]trimethylammonium chloride (AETAC) and acrylamide (AAm) (AETAC-co-AAm) are polyelectrolytes used as flocculants in wastewater purification. Diffusion-ordered two-dimensional NMR spectroscopy (DOSY) experiments for AETAC-co-AAm samples with Mw ranging from 1.9 to 3.9 million and a polyacrylamide sample with Mw of 1.3 million were carried out in pure D2O and in D2O containing 0.1 or 1 M NaCl using an inverse-geometry diffusion probe system. Projections of the DOSY contour plots onto the diffusion coefficient (D) dimension gave distributions of D for the AETAC and AAm units in the samples. The D values at the maximum point of the distribution (Dp) agreed fairly well with those determined by dynamic light scattering.

Theoretical analysis of flow effects in spatially encoded diffusion NMR

The measurement of translational diffusion coefficients by nuclear magnetic resonance (NMR) spectroscopy is essential in a broad range of fields, including organic, inorganic, polymer, and supramolecular chemistry. It is also a powerful method for mixture analysis. Spatially encoded diffusion NMR (SPEN DNMR)" is a time efficient technique to collect diffusion NMR data, which is particularly relevant for the analysis of samples that evolve in time. In many cases, motion other than diffusion is present in NMR samples. This is, for example, the case of flow NMR experiments, such as in online reaction monitoring and in the presence of sample convection. Such motion is deleterious for the accuracy of DNMR experiments in general and for SPEN DNMR in particular. Limited theoretical understanding of flow effects in SPEN DNMR experiments is an obstacle for their broader experimental implementation. Here, we present a detailed theoretical analysis of flow effects in SPEN DNMR and of their compensation, throughout the relevant pulse sequences. This analysis is validated by comparison with numerical simulation performed with the Fokker-Planck formalism. We then consider, through numerical simulation, the specific cases of constant, laminar, and convection flow and the accuracy of SPEN DNMR experiments in these contexts. This analysis will be useful for the design and implementation of fast diffusion NMR experiments and for their applications.

Functionalization of Polylactide with Multiple Tetraphenyethane Inifer Groups to Form PLA Block Copolymers with Vinyl Monomers

In the present contribution, a new strategy for preparing block copolymers of polylactide (PLA), a bio-derived polymer of increasing importance, is described. The method should lead to multiblock copolymers of lactide with vinyl monomers (VM), i.e., monomers that polymerize according to different mechanisms, and is based on the introduction of multiple "inifer" (INItiator/transFER agent) groups into PLA's structure. As an "inifer" group, tetraphenylethane (TPE, known to easily thermally dissociate to radicals) was incorporated into PLA chains using diisocyanate. PLA that contained TPE groups (PLA-PU) was characterized, and its ability to form initiating radicals was demonstrated by ESR measurements. PLA-PU was used as a "macroinifer" for the polymerization of acrylonitrile and styrene upon moderate heating (85 °C) of the PLA-PU in the presence of monomers. The formation of block copolymers PLA/PVM was confirmed by ¹H NMR, DOSY NMR, and FTIR spectroscopies and the SEC method. The prepared copolymers showed only one glass transition in DSC curves with T_g values higher than those of PLA-PU.

Synthesis of a Negatively Curved Nanocarbon Molecule with an Octagonal Omphalos via Design-of-Experiments Optimizations Supplemented by Machine Learning

A saddle-shaped nanocarbon molecule was synthesized, which revealed the existence of negative Gauss curvatures on a >3-nm molecular structure possessing 192 π-electrons. The synthesis was facilitated by a protocol developed with Design-of-Experiments optimizations and machine-learning predictions, and spectroscopy and crystallography were used to reveal the saddle-shaped structure of the molecule. Solution-phase analyses showed the presence of dimeric assembly, and crystallographic analyses revealed the stacked dimeric structures. The stacked crystal structure was scrutinized by various methods, including Gauss curvatures derived from the discrete surface theory of geometry, to reveal the important role of the molecular Gauss curvature in dimeric assembly.

Ultrafast 2D NMR for the analysis of complex mixtures

2D NMR is extensively used in many different fields, and its potential for the study of complex biochemical or chemical mixtures has been widely demonstrated. 2D NMR gives the ability to resolve peaks that overlap in 1D spectra, while providing both structural and quantitative information. However, complex mixtures are often analysed in situations where the data acquisition time is a crucial limitation, due to an ongoing chemical reaction or a moving sample from a hyphenated technique, or to the high-throughput requirement associated with large sample collections. Among the great diversity of available fast 2D methods, ultrafast (or single-scan) 2D NMR is probably the most general and versatile approach for complex mixture analysis. Indeed, ultrafast NMR has undergone an impressive number of methodological developments that have helped turn it into an efficient analytical tool, and numerous applications to the analysis of mixtures have been reported. This review first summarizes the main concepts, features and practical limitations of ultrafast 2D NMR, as well as the methodological developments that improved its analytical potential. Then, a detailed description of the main applications of ultrafast 2D NMR to mixture analysis is given. The two major application fields of ultrafast 2D NMR are first covered, i.e., reaction/process monitoring and metabolomics. Then, the potential of ultrafast 2D NMR for the analysis of hyperpolarized mixtures is described, as well as recent developments in oriented media. This review focuses on high-resolution liquid-state 2D experiments (including benchtop NMR) that include at least one spectroscopic dimension (i.e., 2D spectroscopy and DOSY) but does not cover in depth applications without spectral resolution and/or in inhomogeneous fields.

Rapid Online Analysis of Photopolymerization Kinetics and Molecular Weight Using Diffusion NMR

Online, high-throughput molecular weight analysis of polymerizations is rare, with most studies relying on tedious sampling techniques and batchwise postanalysis. The ability to track both monomer conversion and molecular weight evolution in real time could underpin precision polymer development and facilitate study of rapid polymerization reactions. Here, we use a single time-resolved diffusion nuclear magnetic resonance (NMR) experiment to simultaneously study the kinetics and molecular weight evolution during a photopolymerization, with in situ irradiation inside the NMR instrument. As a model system, we used a photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The data allow diffusion coefficients and intensities to be calculated every 14 s from which the polymer size and monomer conversion can be extracted. Key to this approach is (1) the use of shuffled gradient amplitudes in the diffusion NMR experiment to access reactions of any rate, (2) the addition of a relaxation agent to increase achievable time resolution and, (3) a sliding correction that accounts for viscosity changes during polymerization. Diffusion NMR offers a uniquely simple, translatable handle for online monitoring of polymerization reactions.

Composite Dynamic Hydrogels Constructed on Boronic Ester Cross-Links with NIR-Enhanced Diffusivity

Dynamic hydrogels with thermosensitive cross-links are highly promising platforms for "on-demand" drug delivery systems. However, there is a problem with triggering a response in their whole volume, which reduces their efficiency. To achieve better thermoresponsiveness, a graphene oxide-filled composite hydrogel based on boronic ester cross-links, composed of hyperbranched polyglycidol, HbPGL, and poly(acrylamide-ran-2-acrylamidephenylboronic acid), poly(AM-ran-2-AAPBA), has been constructed. The homogeneous embedment of graphene oxide (GO) in the network assured near-infrared (NIR)-photothermal response in its bulk due to the rapid light-to-heat conversion. The rate and amplitude of materials response increase with graphene oxide concentration. The temperature of the hydrogel containing graphene oxide at a concentration of 13.2 mg/mL increased from 36.6 to 41 °C in 29 s upon NIR irradiation. The network diffusivity and the extent of its change with temperature can be regulated by the length of the applied boronic acid-based cross-linking agent. The hydrogel constructed on the shorter copolymer (M_n = 23 000 g/mol) displayed a significant increase in diffusivity with temperature. A diffusion ordered NMR study revealed that the diffusion coefficient determined for niacin, a model drug encapsulated in the hydrogel, increased from 6.09 × 10^-10 at 25 °C to 1.28 × 10^-9 m²/s at 41 °C. In the case of the hydrogel constructed on the longer acrylamide copolymer (M_n = 43 000 g/mol), in which physical entanglements stabilize the network, the change of encapsulated niacin diffusion coefficient was significantly smaller, i.e., from 3.83 × 10^-10 at 25 °C to 6.63 × 10^-10 m²/s at 41 °C. The possibility of on-demand NIR-regulated diffusivity of the reported boronic ester-based hydrogels makes them promising candidates for controlled drug delivery platforms.

Host guest chemistry of a bidentate silyl-triflate bis-Lewis-acid – complex complexation behaviour unravelled by diffusion NMR spectroscopy

The bidentate silicon-based Lewis acid, bis(dimethyl-(trifluoromethylsulfonyl)silylethyl)dimethylsilane, Me2Si[(CH2)2SiMe2-OTf]2, was prepared by a two-step synthesis starting from dimethyldivinylsilane by hydrosilylation with dimethylchlorosilane and subsequent Lewis acidity enhancement of the terminal silicon atoms...

Fast and Accurate Diffusion NMR Acquisition in Continuous Flow

FlowNMR spectroscopy has become a popular and powerful technique for online reaction monitoring. DOSY NMR is an established technique for obtaining information about diffusion rates and molecular size on static...

Following Molecular Mobility during Chemical Reactions: No Evidence for Active Propulsion

The reported changes in self-diffusion of small molecules during reactions have been attributed to "boosted mobility". We demonstrate the critical role of changing concentrations of paramagnetic ions on nuclear magnetic resonance (NMR) signal intensities, which led to erroneous measurements of diffusion coefficients. We present simple methods to overcome this problem. The use of shuffled gradient amplitudes allows accurate diffusion NMR measurements, even with time-dependent relaxation rates caused by changing concentrations of paramagnetic ions. The addition of a paramagnetic relaxation agent allows accurate determination of both diffusion coefficients and reaction kinetics during a single experiment. We analyze a copper-catalyzed azide-alkyne cycloaddition "click" reaction, for which boosted mobility has been claimed. With our methods, we accurately measure the diffusive behavior of the solvent, starting materials, and product and find no global increase in diffusion coefficients during the reaction. We overcome NMR signal overlap using an alternative reducing agent to improve the accuracy of the diffusion measurements. The alkyne reactant diffuses slower as the reaction proceeds due to binding to the copper catalyst during the catalytic cycle. The formation of this intermediate was confirmed by complementary NMR techniques and density functional theory calculations. Our work calls into question recent claims that molecules actively propel or swim during reactions and establishes that time-resolved diffusion NMR measurements can provide valuable insight into reaction mechanisms.

Solvent-Independent Molecular Weight Determination of Polymers Based on a Truly Universal Calibration

Diffusion-ordered NMR spectroscopy (DOSY) allows for accurate molecular weight calibration and determination that can be corrected for solvent influences. Polystyrene and poly(ethylene glycol) standards have been used to calibrate DOSY diffusion data for a variety of solvents, showing a high correlation of data when the bulk viscosity of the solvent is accounted for following the Stokes-Einstein equation. In this way, a type of universal calibration is introduced that allows for determinations of average molecular weight that are at least as accurate as those of traditional size-exclusion chromatography (SEC), if not better. Further, we demonstrate that DOSY calibrations can be used between laboratories, hence removing the need for individual calibration of setups as currently done.

Getting control of hydrogel networks with cross-linkable monomers

The structure of a hydrogel network determines its ability to dissipate stress upon deformation, as well as its ability to swell in water. By designing systems with cross-linkable thiol groups in the monomers, radical thiol-ene chemistry was used to form controlled networks for acrylamide monomers. The use of radical thiol-ene chemistry effectively suppressed homo-polymerization of the bis(acrylamide) monomer and resulted in networks of alternating thiol and acrylamide monomers. Additionally, if the stoichiometry between the monomers is controlled, the network should approach that of ideality. In the case of bis(acrylamide) monomers, the incorporation of hydrogen-bond donors into the network creates a single network hydrogel with the benefits of high strength and ductility from the simultaneous incorporation of chemical and physical cross-links. Additionally, this strategy suppresses the formation of homo-polymerization in the acrylamide monomer to achieve an alternating network, which is supported with NMR characterization of base-digested fragments. For three different monomer compositions, the resulting gels had high compressive strength (up to 40 MPa) and tunable mechanical properties. The high mechanical strength of the 1 : 1, thiol : ene gel composition is due to the uniform distribution of cross-links, which creates defect-free networks for efficient stress transfer. The present one-pot synthetic strategy toward controlled gel networks affords monomer versatility and synthetic ease, as well as the potential for mechanically robust materials.

Natural products dereplication by diffusion ordered NMR spectroscopy (DOSY)

Diffusion-ordered NMR spectroscopy (DOSY) can be used to analyze mixtures of compounds since resonances deriving from different compounds are distinguished by their diffusion coefficients (D). Previously, DOSY has mostly been used for organometallic and polymer analysis, we have now applied DOSY to investigate diffusion coefficients of structurally diverse organic compounds such as natural products (NP). The experimental Ds derived from 55 diverse NPs has allowed us to establish a power law relationship between D and molecular weight (MW) and therefore predict MW from experimental D. We have shown that D is also affected by factors such as hydrogen bonding, molar density and molecular shape of the compound and we have generated new models that incorporate experimentally derived variables for these factors so that more accurate predictions of MW can be calculated from experimental D. The recognition that multiple physicochemical properties affect D has allowed us to generate a polynomial equation based on multiple linear regression analysis of eight calculated physicochemical properties from 63 compounds to accurately correlate predicted D with experimental D for any known organic compound. This equation has been used to calculate predicted D for 217 043 compounds present in a publicly available natural product database (DEREP-NP) and to dereplicate known NPs in a mixture based on matching of experimental D and structural features derived from NMR analysis with predicted D and calculated structural features in the database. These models have been validated by the dereplication of a mixture of two known sesquiterpenes obtained from Tasmannia xerophila and the identification of new alkaloids from the bryozoan Amathia lamourouxi. These new methodologies allow the MW of compounds in mixtures to be predicted without the need for MS analysis, the dereplication of known compounds and identification of new compounds based solely on parameters derived by DOSY NMR.

We report accurate DOSY NMR based molecular weight and diffusion coefficient prediction tools. These tools can be used to dereplicate known natural products from databases using structurally rich NMR data as a surrogate for mass spectrometric data.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Characterization of Polymer Molecular Weight Distribution by NMR Diffusometry: Experimental Criteria and Findings

NMR diffusometry finds useful applications in characterizing molecular weight (M) and molecular weight distribution (MWD) for polymers due to its unique advantages in generic detection, chemical selectivity, and quantitation. Here, we present a fundamental study to explore how the condition of diffusion measurement impacts the determined MWD. We use the critical dilute concentration C_dilute^* to explicitly delineate the boundary of the sufficiently dilute condition, below which chain interactions have a negligible impact on polymer diffusion. We present solid evidence to validate the postulated theory that links C_dilute^* to molecular weight, polydispersity, and chain conformation. Quantitative analysis reveals the consequence of violating the sufficiently dilute condition with M/MWD characterization. These findings provide useful guidance for M/MWD characterization by NMR diffusion and help to rationalize the data disparity that exists in the literature. The results further provide new insights into the interplay between chain conformations and diffusion for globular structure, such as proteins, and provide a different approach toward characterizing polymer architecture and molecular weight.

Molecular Characterization of Polymer Networks

Polymer networks are complex systems consisting of molecular components. Whereas the properties of the individual components are typically well understood by most chemists, translating that chemical insight into polymer networks themselves is limited by the statistical and poorly defined nature of network structures. As a result, it is challenging, if not currently impossible, to extrapolate from the molecular behavior of components to the full range of performance and properties of the entire polymer network. Polymer networks therefore present an unrealized, important, and interdisciplinary opportunity to exert molecular-level, chemical control on material macroscopic properties. A barrier to sophisticated molecular approaches to polymer networks is that the techniques for characterizing the molecular structure of networks are often unfamiliar to many scientists. Here, we present a critical overview of the current characterization techniques available to understand the relation between the molecular properties and the resulting performance and behavior of polymer networks, in the absence of added fillers. We highlight the methods available to characterize the chemistry and molecular-level properties of individual polymer strands and junctions, the gelation process by which strands form networks, the structure of the resulting network, and the dynamics and mechanics of the final material. The purpose is not to serve as a detailed manual for conducting these measurements but rather to unify the underlying principles, point out remaining challenges, and provide a concise overview by which chemists can plan characterization strategies that suit their research objectives. Because polymer networks cannot often be sufficiently characterized with a single method, strategic combinations of multiple techniques are typically required for their molecular characterization.

Fast Identification of Food Thickeners by Nontargeted NMR-Spectroscopy

Food thickeners are carbohydrate additives that can only be determined by long-term, multistep analysis. Fast methods to directly determine thickeners in food matrixes are therefore welcome. In this study, a rapid procedure based on the direct ¹H NMR analysis of food samples dissolved in deuterated water was developed. Individual thickeners were assigned due to specific marker signals gleaned from two-dimensional NMR analyses. The combination of one-dimensional ¹H NMR and DOSY experiments enabled unequivocal assignments of thickeners even in complex matrixes. Using this approach, gum arabic, carrageenan, agar-agar, galactomannans, and pectin could be identified in pastille, glaze, and fruit spread. Because of low concentrations (<0.5%-1%, w/w), the same thickeners and others such as xanthan gum and alginate could not be determined directly by NMR in curry sauce, rice pudding, choco milk drink, and lemon peel flavor. Moreover, NMR analyses of the hydrolysate did not reveal the specific monomeric units of the thickeners under study, as shown for the hydrolysate of lemon peel flavor. Nevertheless, the NMR approach could provide welcome means in the future to directly determine intact thickeners in food.

Optimization of Extraction and Purification of Polysaccharides from Veronicastrum axillare, and Evaluation of Their Biological Activities

Veronicastrum axillare polysaccharides (VAP) were isolated by cellulase-assisted digestion. The optimum conditions (2 % cellulase, 47 °C for 2.5 h, then, 95 °C for 2.5 h, pH 4.1, solid/liquid ratio 1 : 7.6) were identified by a combination of single factor optimization and response surface DOE (design of experiment) methods, and achieved a yield of 4.7 %. Treatment with 1 % TCA for 10 min, then, 2 % DEAE-cellulose removed protein and colored impurities. Purified VAP retained most of the radical-scavenging activities and GES-1 cell protection capability in vitro, indicating VAP were the key active components of V. axillare. Some molecular features were identified by FT-IR and NMR analyses. The molecular weight was estimated from DOSY NMR experiments to be around 21 kDa. There were 6.3 % uronic acid residues in the VAP. The constituent sugars after TFA hydrolysis were identified by HPLC to include glucose, arabinose, rhamnose, galactose, and xylose in a molar ratio of 405 : 259 : 82 : 42 : 1.

Direct synthesis of light-emitting triblock copolymers from RAFT polymerization

We introduce a straightforward and clean method to synthesize semiconducting triblockcopolymers (tri-BCPs) using RAFT polymerization.

Post-polymerization modification of polybenzoxazines with boronic acids supported by B–N interactions

Polybenzoxazines (PBZs) were modified using the reactivity of their inherent bis(2-hydroxybenzyl)amine (BHBA) units toward boronic acids, RB(OH)2.