Controlled Polymerization of Next-Generation Renewable Monomers and Beyond

Polymers from Plant Oils Linked by Siloxane Bonds for Programmed Depolymerization

The increased production of plastics is leading to the accumulation of plastic waste and depletion of limited fossil fuel resources. In this context, we report a strategy to create polymers that can undergo controlled depolymerization by linking renewable feedstocks with siloxane bonds. α,ω-Diesters and α,ω-diols containing siloxane bonds were synthesized from an alkenoic ester derived from castor oil and then polymerized with varied monomers, including related biobased monomers. In addition, cyclic monomers derived from this alkenoic ester and hydrosiloxanes were prepared and cyclized to form a 26-membered macrolactone containing a siloxane unit. Sequential ring-opening polymerization of this macrolactone and lactide afforded an ABA triblock copolymer. This set of polymers containing siloxanes underwent programmed depolymerization into monomers in protic solvents or with hexamethyldisiloxane and an acid catalyst. Monomers afforded by the depolymerization of polyesters containing siloxane linkages were repolymerized to demonstrate circularity in select polymers. Evaluation of the environmental stability of these polymers toward enzymatic degradation showed that they undergo enzymatic hydrolysis by a fungal cutinase from Fusarium solani. Evaluation of soil microbial metabolism of monomers selectively labeled with 13C revealed differential metabolism of the main chain and side chain organic groups by soil microbes.

From Forest to Future: Synthesis of Sustainable High Molecular Weight Polyamides Using and Investigating the AROP of β-Pinene Lactam

Polyamides (PA) are among the most essential and versatile polymers due to their outstanding characteristics, for example, high chemical resistance and temperature stability. Furthermore, nature-derived monomers can introduce hard-to-synthesize structures into the PAs for unique polymer properties. Pinene, as one of the most abundant terpenes in nature and its presumable stability-giving bicyclic structure, is therefore highly promising. This work presents simple anionic ring-opening polymerizations of β-pinene lactam (AROP) in-bulk and in solution. PAs with high molecular weights, suitable for further processing, are produced. Their good mechanical, thermal (Td s up to 440 °C), and transparent appearance render them promising high-performance biomaterials. In the following, the suitability of different initiators is discussed. Thereby, it is found that NaH is the most successful for in-bulk polymerization, with a degree of polymerization (DP) of about 322. For solution-AROP, iPrMgCl·LiCl is successfully used for the first time, achieving DPs up to about 163. The obtained PAs are also hot-pressed, and the dynamic mechanical properties are analyzed.

Highly Flexible Poly(1,12-dodecylene 5,5'-isopropylidene-bis(ethyl 2-furoate)): A Promising Biobased Polyester Derived from a Renewable Cost-Effective Bisfuranic Precursor and a Long-Chain Aliphatic Spacer

The continuous search for novel biobased polymers with high-performance properties has highlighted the role of monofuranic-based polyesters as some of the most promising for future plastic industry but has neglected the huge potential for the polymers' innovation, relatively low cost, and synthesis easiness of 5,5'-isopropylidene bis-(ethyl 2-furoate) (DEbF), obtained from the platform chemical, worldwide-produced furfural. In this vein, poly(1,12-dodecylene 5,5'-isopropylidene -bis(ethyl 2-furoate)) (PDDbF) was introduced, for the first time, as a biobased bisfuranic long-chain aliphatic polyester with an extreme flexibility function, competing with fossil-based polyethylene. This new polyester in-depth characterization confirmed its expected structure (FTIR, ¹H, and ¹³C NMR) and relevant thermal features (DSC, TGA, and DMTA), notably, an essentially amorphous character with a glass transition temperature of -6 °C and main maximum decomposition temperature of 340 °C. Furthermore, PDDbF displayed an elongation at break as high as 732%, around five times higher than that of the 2,5-furandicarboxylic acid counterpart, stressing the unique features of the bisfuranic class of polymers compared to monofuranic ones. The enhanced ductility combined with the relevant thermal properties makes PDDbF a highly promising material for flexible packaging.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Bio-based monomers for amide-containing sustainable polymers

The field of sustainable polymers from renewable feedstocks is a fast-reviving field after the decades-long domination of petroleum-based polymers. Amide-containing polymers exhibit a wide range of properties depending on the type of amide (primary, secondary, and tertiary), amide density, and other molecular structural parameters (co-existing groups, molecular weight, and topology). Engineering amide groups into sustainable polymers via the "monomer approach" is an industrially proven strategy, while bio-based monomers are of enormous importance to bridge the gap between renewable sources and amide-containing sustainable polymers (AmSPs). This feature article aims at conceptualizing the monomer-design philosophy behind most of the reported AmSPs and is organized by discussing di-functional monomers for step-growth polymerization, cyclic monomers for ring-opening polymerization and amide-containing monomers for chain-growth polymerization. We also give a perspective on AmSPs with respect to monomer design and performance enhancement.

The Novel Gallium Aminobisphenolate Initiator of the Ring-Opening Copolymerization of L-Lactide and ε-Caprolactone: A Computational Study

Density functional theory (DFT) simulations of ring-opening copolymerization of ε-caprolactone (CL) and L-lactide (LA) in presence of novel gallium complex on aminobis (phenolate) ligand are conducted. The initial steps of polymerization of CL and LA as well as the first steps of propagation which led to LGa-LA-LA-OMe, LGa-LA-CL-OMe, LGa-CL-LA-OMe, or LGa-CL-CL-OMe derivatives have been analyzed in detail. According to these data, the studied catalyst is a rare example of a catalyst in which, during copolymerization, the polymerization of CL should proceed faster than LA. Thus, we predict the formation of a mainly block copolymer poly(CL-block-LA) using this catalyst.

Conceptualizing controversies in the EU circular bioeconomy transition

The transition towards a circular bioeconomy (CBE) in the European Union is not without contestation. In particular, research has highlighted potential trade-offs of the large-scale production of bio-resources, for instance with environmental quality goals. To date, however, it remains underexplored in the CBE literature how controversies develop throughout a transition process. To address this gap, this paper explores where controversies are situated in a transition, how they change throughout, and how they influence the transition process. First, we suggest that controversies can be situated on and between different system layers within a transition. Second, we offer an explanation of how controversies evolve, as actors confirm, integrate, disintegrate and polarize underlying storylines. Third, these controversies can have both productive and unproductive outcomes while they unfold throughout a transition. We illustrate this understanding with the example of biorefineries as CBE key technology and discuss a research agenda on controversies in sustainability transitions.

Hydrophilic bio-based polymers by radical copolymerization of cyclic vinyl ethers derived from glycerol

In this study, novel functional polymers were obtained by using glycerol as a bio-based precursor, which is abundant and inexpensive renewable feedstock with a polyol skeleton. Cyclic vinyl ethers with acetal linkage were derived from glycerol to yield well-defined copolymers by reversible addition-fragmentation chain transfer (RAFT) radical copolymerization with common vinyl monomers. The resulting acetal-containing copolymers could be hydrolyzed under acidic conditions to afford water-soluble functional polymers with pendent diols.

Biosourced Polymeric Emulsifiers for Miniemulsion Copolymerization of Myrcene and Styrene: Toward Biobased Waterborne Latex as Pickering Emulsion Stabilizer

Biobased waterborne latexes were synthesized by miniemulsion radical copolymerization of a biosourced β-myrcene (My) terpenic monomer and styrene (S). Biobased amphiphilic copolymers were designed to act as stabilizers of the initial monomer droplets and the polymer colloids dispersed in the water phase. Two types of hydrophilic polymer backbones were hydrophobically modified by terpene molecules to synthesize two series of amphiphilic copolymers with various degrees of substitution. The first series consists of poly(acrylic acid) modified with tetrahydrogeraniol moieties (PAA-g-THG) and the second series is based on the polysaccharide carboxymethylpullulan amino-functionalized with dihydromyrcenol moieties (CMP-g-(NH-DHM)). The produced waterborne latexes with diameters between 160 and 300 nm and were composed of polymers with varying glass transition temperatures (T_g, PMy = -60 °C, T_{g, P(My-co-S)} = -14 °C, T_g, PS = 105 °C) depending on the molar fraction of biobased β-myrcene (f_My,0 = 0, 0.43, or 1). The latexes successfully stabilized dodecane-in-water and water-in-dodecane emulsions for months at all compositions. The waterborne latexes composed of low T_g poly(β-myrcene) caused interesting different behavior during drying of the emulsions compared to polystyrene latexes.

Versatile Chemical Recycling Strategies: Value-Added Chemicals from Polyester and Polycarbonate Waste

Zn^II -complexes bearing half-salan ligands were exploited in the mild and selective chemical upcycling of various commercial polyesters and polycarbonates. Remarkably, we report the first example of discrete metal-mediated poly(bisphenol A carbonate) (BPA-PC) methanolysis being appreciably active at room temperature. Indeed, Zn(2)₂ and Zn(2)Et achieved complete BPA-PC consumption within 12-18 mins in 2-Me-THF, noting high bisphenol A (BPA) yields (S_BPA =85-91 %) within 2-4 h. Further kinetic analysis found such catalysts to possess k_app values of 0.28±0.040 and 0.47±0.049 min^-1 respectively at 4 wt%, the highest reported to date. A completely circular upcycling approach to plastic waste was demonstrated through the production of several renewable poly(ester-amide)s (PEAs), based on a terephthalamide monomer derived from bottle-grade poly(ethylene terephthalate) (PET), which exhibited excellent thermal properties.

Catalytic Ring-Opening Copolymerization of Fatty Acid Epoxides: Access to Functional Biopolyesters

Fatty acid epoxies serve as valuable starting materials for the development of bio-based polyesters. Here we present a new and efficient catalytic process that allows for the copolymerization of fatty acid-based epoxides and various cyclic anhydrides under attractive process conditions affording functional polyesters. The degree of functionalization and the nature of the polymer backbone can be modulated via monomer design. Postpolymerization cross-linking processes were examined to create rigid macromolecular networks that build on orthogonal polyester functionality, creating possible entries for materials with switchable thermal and mechanical properties.

Synthesis, Properties, and Applications of Bio-Based Cyclic Aliphatic Polyesters

Cyclic polymers have long been reported in the literature, but their development has often been stunted by synthetic difficulties such as the presence of linear contaminants. Research into the synthesis of these polymers has made great progress in the past decade, and this review covers the synthesis, properties, and applications of cyclic polymers, with an emphasis on bio-based aliphatic polyesters. Synthetic routes to cyclic polymers synthesized from bioderived monomers, alongside mechanistic descriptions for both ring closure and ring expansion polymerization approaches, are reviewed. The review also highlights some of the unique physical properties of cyclic polymers together with potential applications. The findings illustrate the substantial recent developments made in the syntheses of cyclic polymers, as well as the progress which can be made in the commercialization of bio-based polymers through the versatility this topology provides.

Synthesis of Semicrystalline Long Chain Aliphatic Polyesters by ADMET Copolymerization of Dianhydro-D-glucityl bis(undec-10-enoate) with 1,9-Decadiene and Tandem Hydrogenation

Acyclic diene metathesis (ADMET) copolymerization of dianhydro-D-glucityl bis(undec-10-enoate) (M1) with 1,9-decadiene (DCD) using ruthenium-carbene catalyst, RuCl2(IMesH2)(CH-2-OiPr-C6H4) [IMesH2 = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene, HG2], afforded unsaturated polyesters (Mn = 9300–23,400) under the optimized conditions. Subsequent tandem hydrogenation (H2 1.0 MPa, 50 °C) with the addition of a small amount of Al2O3 resulted in the saturated polymers having a melting temperature of 71.7–107.6 °C, depending on the molar ratio of M1 and DCD.

Catalyst-Free Self-Healing Bio-Based Polymers: Robust Mechanical Properties, Shape Memory, and Recyclability

The poor mechanical properties and disadvantages of catalysts limit the application of self-healing materials. To address these issues, catalyst-free self-healing bio-based polymers (AESO-EMPA polymers) with robust mechanical properties were prepared using epoxidized maleopimaric anhydride (EMPA) and aminated epoxidized soybean oil (AESO). The AESO-EMPA polymers are recyclable and exhibit self-healing and shape memory because of the dual-dynamic network of multiple H-bonds and dynamic ester bonds in the structure. Under the synergistic catalysis of the tertiary amines and hydroxyl groups originated from the polymers, the polymers in this study achieve network rearrangement without the need for additional catalysts. The polymers also exhibit excellent mechanical properties with a tensile strength of 29.1 ± 0.25 MPa and a T_g of 80.2 °C owing to the unique rigid backbone of rosin and the dual-dynamic network. The AESO-EMPA polymers can be used as reusable adhesives and exhibit excellent shear strength and repair rates.

Yale School of Public Health Symposium: An overview of the challenges and opportunities associated with per- and polyfluoroalkyl substances (PFAS)

On December 13, 2019, the Yale School of Public Health hosted a symposium titled "Per- and Polyfluoroalkyl Substances (PFAS): Challenges and Opportunities" in New Haven, Connecticut. The meeting focused on the current state of the science on these chemicals, highlighted the challenges unique to PFAS, and explored promising opportunities for addressing them. It brought together participants from Yale University, the National Institute of Environmental Health Sciences, the University of Massachusetts Amherst, the University of Connecticut, the Connecticut Agricultural Experiment Station, the Connecticut Departments of Public Health and Energy and Environmental Protection, and the public and private sectors. Presentations during the symposium centered around several primary themes. The first reviewed the current state of the science on the health effects associated with PFAS exposure and noted key areas that warranted future research. As research in this field relies on specialized laboratory analyses, the second theme considered commercially available methods for PFAS analysis as well as several emerging analytical approaches that support health studies and facilitate the investigation of a broader range of PFAS. Since mitigation of PFAS exposure requires prevention and cleanup of contamination, the third theme highlighted new nanotechnology-enabled PFAS remediation technologies and explored the potential of green chemistry to develop safer alternatives to PFAS. The fourth theme covered collaborative efforts to assess the vulnerability of in-state private wells and small public water supplies to PFAS contamination by adjacent landfills, and the fifth focused on strategies that promote successful community engagement. This symposium supported a unique interdisciplinary coalition established during the development of Connecticut's PFAS Action Plan, and discussions occurring throughout the symposium revealed opportunities for collaborations among Connecticut scientists, state and local officials, and community advocates. In doing so, it bolstered the State of Connecticut's efforts to implement the ambitious initiatives that its PFAS Action Plan recommends.

Films Based on Thermoplastic Starch Blended with Pine Resin Derivatives for Food Packaging

Completely biobased and biodegradable thermoplastic starch (TPS) based materials with a tunable performance were prepared for food packaging applications. Five blends were prepared by blending TPS with 10 wt%. of different pine resins derivatives: gum rosin (GR), disproportionated gum rosin (RD), maleic anhydride-modified gum rosin (CM), pentaerythritol ester of gum rosin (LF), and glycerol ester of gum rosin (UG). The materials were characterized in terms of thermo-mechanical behavior, surface wettability, color performance, water absorption, X-ray diffraction pattern, and disintegration under composting conditions. It was determined that pine resin derivatives increase the hydrophobicity of TPS and also increase the elastic component of TPS which stiffen the TPS structure. The water uptake study revealed that GR and LF were able to decrease the water absorption of TPS, while the rest of the resins kept the water uptake ability. X-ray diffraction analyses revealed that GR, CM, and RD restrain the aging of TPS after 24 months of aging. Finally, all TPS-resin blends were disintegrated under composting conditions during the thermophilic incubation period (90 days). Because of the TPS-resin blend's performance, the prepared materials are suitable for biodegradable rigid food packaging applications.

β-Pinene-Derived Polyesteramides and Their Blends: Advances in Their Upscaling, Processing, and Characterization

Terpene-based polyesteramides (PEAs) are sustainable and have a variety of favorable properties, making them suitable for a wide range of applications and for contribution to a much more sustainable polymer industry. This work focuses on the synthesis of the lactam from β-pinene and its copolymerization with ε-caprolactone. An important step in synthesizing β-pinene lactam is the oxidation of β-pinene to nopinone. To make the established oxidative cleavage more sustainable and efficient, the required amounts of Al₂ O₃ and KMnO₄ are significantly reduced by using H₂ SO₄ as a catalyst. For the Beckmann rearrangement various catalysts and co-reagents are screened. Among these, the reaction with tosyl chloride is found the most favorable. Subsequently, the chain lengths of the β-pinene-based PEAs are remarkably increased from 6000 g mol^-1 to more than 25 100 g mol^-1 by fine-tuning reaction time, temperature, and decreasing catalyst and initiator concentrations. Also, different catalysts for polymerization are tested. The resulting material shows melting temperatures of ≈55 °C and decomposition temperatures of 354 °C or higher. Processing via melt pressing or casting turned out to be quite difficult due to the polymer's brittleness. Furthermore, regarding biomedical applications, blends of PEA with polyethylene glycol were successfully prepared, yielding a more hydrophilic material.

Films Based on Mater-Bi® Compatibilized with Pine Resin Derivatives: Optical, Barrier, and Disintegration Properties

Mater-Bi^® NF866 (MB) was blended with gum rosin and two pentaerythritol esters of gum rosin (labeled as LF and UT), as additives, to produce biobased and compostable films for food packaging or agricultural mulch films. The films were prepared by blending MB with 5, 10, and 15 wt.% of each additive. The obtained films were characterized by optical, colorimetric, wettability, and oxygen barrier properties. Moreover, the additives and the MB-based films were disintegrated under composting conditions and the effect of each additive on the biodegradation rate was studied. All films were homogeneous and optically transparent. The color of the films tended to yellow tones due to the addition of pine resin derivatives. All the formulated films presented a complete UV-transmittance blocking effect in the UVA and UVB region, and those with 5 wt.% of pine resin derivatives increased the MB hydrophobicity. Low amounts of resins tend to maintain the oxygen transmission rate (OTR) values of the neat MB, due to its good solubilizing and compatibilizing effects. The disintegration under composting conditions test revealed that gum rosin completely disintegrates in about 90 days, while UT degrades 80% and LF degrades 5%, over 180 days of incubation. As expected, the same tendency was obtained for the disintegration of the studied films, although Mater-Bi^® reach 28% of disintegrability over the 180 days of the composting test.

INTRODUCING BIOBASED NONPOLAR BOTTLEBRUSH β-MYRCENE SEGMENTS TO IMPROVE SILICA DISPERSION FOR SUSTAINABLE SSBR/SILICA NANOCOMPOSITES

To overcome the problem of fossil fuel depletion and associated environmental issues arising from the use of tire tread elastomers, a convenient, environmentally friendly, and highly efficient strategy was developed to prepare high-performance green solution polymerized styrene–butadiene rubber (SSBR)/silica nanocomposites by improving silica dispersion in the nonpolar polymer matrix via the introduction of a biobased nonpolar bottlebrush segment with two double bonds. Various elastomers containing biobased nonpolar bottlebrush β-myrcene segments were synthesized using an industrially robust anionic polymerization method. Results of rubber process analysis, small-angle X-ray scattering, scanning electron microscopy, and transmission electron microscopy revealed that rubber with myrcene could significantly improve silica dispersibility and inhibit the strong filler–filler interactions, which are due to the formation of hydrogen bonding between the double bonds in the myrcene block and silanol groups on the silica surface and possibly to the spreading or infiltrating of myrcene bottlebrush segments onto silica. Furthermore, for the modified rubber, rolling resistance decreased by 41.7%, tear strength increased by 20.78%, and tensile strength increased by 77.8% with the elongation at break remained practically unchanged as compared with the unmodified silica/SSBR composite. On the basis of aforementioned assessment, we believe that silica-reinforced β-myrcene–based styrene–butadiene integrated rubber is a versatile and promising candidate for future tire tread elastomers.

Intracellular Activation of Anticancer Therapeutics Using Polymeric Bioorthogonal Nanocatalysts

Bioorthogonal catalysis provides a promising strategy for imaging and therapeutic applications, providing controlled in situ activation of pro-dyes and prodrugs. In this work, the use of a polymeric scaffold to encapsulate transition metal catalysts (TMCs), generating bioorthogonal "polyzymes," is presented. These polyzymes enhance the stability of TMCs, protecting the catalytic centers from deactivation in biological media. The therapeutic potential of these polyzymes is demonstrated by the transformation of a nontoxic prodrug to an anticancer drug (mitoxantrone), leading to the cancer cell death in vitro.

Strategies for the synthesis of block copolymers with biodegradable polyester segments

Oxygenated block copolymers with biodegradable polyester segments can be prepared in one-pot through sequential or simultaneous addition of monomers. This review highlights the state of the art in this area.

Terpenoid-derived conjugated dienes with exo-methylene and a 6-membered ring: high cationic reactivity, regioselective living cationic polymerization, and random and block copolymerization with vinyl ethers

Biobased exo-methylene-conjugated dienes underwent regioselective living cationic polymerization to result in well-defined homo- and copolymers with good thermal properties.

Bio-based and Degradable Block Polyester Pressure-Sensitive Adhesives

A new class of bio-based fully degradable block polyesters are pressure-sensitive adhesives. Bio-derived monomers are efficiently polymerized to make block polyesters with controlled compositions. They show moderate to high peel adhesions (4-13 N cm-1 ) and controllable storage and loss moduli, and they are removed by adhesive failure. Their properties compare favorably with commercial adhesives or bio-based polyester formulations but without the need for tackifier or additives.

NEW ELASTOMERIC MATERIALS FROM BIOMASS: STEREOSELECTIVE POLYMERIZATION OF LINEAR TERPENES AND THEIR COPOLYMERIZATION WITH BUTADIENE BY USING A COBALT COMPLEX WITH PHOSPHANE LIGANDS

The polymerization of bio-renewable terpenes such as β-ocimene (O), β-myrcene (M), and β-farnesene (F) promoted by CoCl2(PCyPh2)2 (1) in combination with modified methylalumoxane at room temperature is reported. Stereoregular polymers of O, M, and F were obtained. 1 also promoted, showing good stereoselectivity, the copolymerization of O and M with butadiene (B) in a wide range of compositions by suitably varying the alimentation feed: up to 67 and 75 mol% of O and M incorporated for poly(ocimene-butadiene) and poly(myrcene-butadiene) copolymers, respectively. These new materials with elastomeric properties (glass transition temperatures observed in the range of −5.7 to −72.5 °C) were fully characterized by differential scanning calorimetry, size exclusion chromatography, and nuclear magnetic resonance spectroscopy (1H, 13C, and two-dimensional experiments).

Biobased Polymers via Radical Homopolymerization and Copolymerization of a Series of Terpenoid-Derived Conjugated Dienes with exo-Methylene and 6-Membered Ring

A series of exo-methylene 6-membered ring conjugated dienes, which are directly or indirectly obtained from terpenoids, such as β-phellandrene, carvone, piperitone, and verbenone, were radically polymerized. Although their radical homopolymerizations were very slow, radical copolymerizations proceeded well with various common vinyl monomers, such as methyl acrylate (MA), acrylonitrile (AN), methyl methacrylate (MMA), and styrene (St), resulting in copolymers with comparable incorporation ratios of bio-based cyclic conjugated monomer units ranging from 40 to 60 mol% at a 1:1 feed ratio. The monomer reactivity ratios when using AN as a comonomer were close to 0, whereas those with St were approximately 0.5 to 1, indicating that these diene monomers can be considered electron-rich monomers. Reversible addition fragmentation chain-transfer (RAFT) copolymerizations with MA, AN, MMA, and St were all successful when using S-cumyl-S'-butyl trithiocarbonate (CBTC) as the RAFT agent resulting in copolymers with controlled molecular weights. The copolymers obtained with AN, MMA, or St showed glass transition temperatures (Tg) similar to those of common vinyl polymers (Tg ~ 100 °C), indicating that biobased cyclic structures were successfully incorporated into commodity polymers without losing good thermal properties.

Introducing random bio-terpene segments to high cis-polybutadiene: making elastomeric materials more sustainable

In this work, we explore the statistical copolymerization of 1,3-butadiene with the terpenic monomers myrcene and farnesene, carried out via coordination polymerization using a neodymium-based ternary catalytic system. The resultant copolymers, poly(butadiene-co-myrcene) and poly(butadiene-co-farnesene), were synthesized at different monomer ratios, elucidating the influence of the bio-based monomer content over the kinetic variables, molecular and thermal properties, and the reactivity constants (Fineman-Ross and Kelen-Tüdös methods) of the resultant copolymers. The results indicate that through the herein employed conditions, it is possible to obtain "more sustainable" high-cis (≈95%) polybutadiene elastomers with random and tunable content of bio-based monomer. Moreover, the polymers exhibit fairly high molecular weights and a rather low dispersity index. Upon copolymerization, the T g of high-cis PB can be shifted from -106 to -75 °C (farnesene) or -107 to -64 °C (myrcene), without altering the microstructure control. This work contributes to the development of more environmentally friendly elastomers, to form "green" rubber materials.

Progress in the Free and Controlled Radical Homo- and Co-Polymerization of Itaconic Acid Derivatives: Toward Functional Polymers with Controlled Molar Mass Distribution and Architecture

Polymeric derivatives of itaconic acid are becoming increasingly more interesting for research and industry because itaconic acid is accessible from renewable resources. In spite of the structural similarity of poly(itaconic acid derivatives) to poly(methacrylates), they are much less reactive, homopolymerize only sluggishly by free radical polymerization (FRP), and are often obtained with low molar masses and conversions. This has so far limited their use. The reasons for the low reactivity of itaconic acid derivatives (including itaconimides, diitaconates, and diitaconamides) are combined steric and electronic effects, as demonstrated by the body of literature on the FRP homopolymerization kinetics of these monomers which is summarized herein. These problems can be solved to a large extent by using controlled radical polymerization (CRP) techniques, notably atom transfer radical polymerization (ATRP) and reversible addition and fragmentation chain transfer radical polymerization (RAFT). By optimizing the reaction conditions for the ATRP and RAFT of itaconic acid derivatives, in particular the reaction temperature, linear relations between molar mass and conversion are obtained in many cases, and homopolymers with high molar masses and reasonably narrow polydispersity indices become accessible. This review presents the state-of-the-art FRP and CRP of itaconic acid derivatives, and highlights functional polymers obtained by these methods.