Photoresponsive Coumarin Polyesters That Exhibit Cross-Linking and Chain Scission Properties

Designed to Degrade: Tailoring Polyesters for Circularity

A powerful toolbox is needed to turn the linear plastic economy into circular. Development of materials designed for mechanical recycling, chemical recycling, and/or biodegradation in targeted end-of-life environment are all necessary puzzle pieces in this process. Polyesters, with reversible ester bonds, are already forerunners in plastic circularity: poly(ethylene terephthalate) (PET) is the most recycled plastic material suitable for mechanical and chemical recycling, while common aliphatic polyesters are biodegradable under favorable conditions, such as industrial compost. However, this circular design needs to be further tailored for different end-of-life options to enable chemical recycling under greener conditions and/or rapid enough biodegradation even under less favorable environmental conditions. Here, we discuss molecular design of the polyester chain targeting enhancement of circularity by incorporation of more easily hydrolyzable ester bonds, additional dynamic bonds, or degradation catalyzing functional groups as part of the polyester chain. The utilization of polyester circularity to design replacement materials for current volume plastics is also reviewed as well as embedment of green catalysts, such as enzymes in biodegradable polyester matrices to facilitate the degradation process.

Phototriggered structures: Latest advances in biomedical applications

Non-invasive control of the drug molecules accessibility is a key issue in improving diagnostic and therapeutic procedures. Some studies have explored the spatiotemporal control by light as a peripheral stimulus. Phototriggered drug delivery systems (PTDDSs) have received interest in the past decade among biological researchers due to their capability the control drug release. To this end, a wide range of phototrigger molecular structures participated in the DDSs to serve additional efficiency and a high-conversion release of active fragments under light irradiation. Up to now, several categories of PTDDSs have been extended to upgrade the performance of controlled delivery of therapeutic agents based on well-known phototrigger molecular structures like o-nitrobenzyl, coumarinyl, anthracenyl, quinolinyl, o-hydroxycinnamate and hydroxyphenacyl, where either of one endows an exclusive feature and distinct mechanistic approach. This review conveys the design, photochemical properties and essential mechanism of the most important phototriggered structures for the release of single and dual (similar or different) active molecules that have the ability to quickly reason of the large variety of dynamic biological phenomena for biomedical applications like photo-regulated drug release, synergistic outcomes, real-time monitoring, and biocompatibility potential.

Photocrosslinkable Polymeric Bicontinuous Microemulsions

We present an approach to photocrosslink bicontinuous microemulsions derived from ternary blends of poly(methoxyethyl acrylate) (PM, Mn = 4200 g/mol), poly(hexyl methacrylate-co-coumarin methacrylate) (PHC, Mn = 6800 g/mol), and PM-b-PHC diblock polymer (Mn = 19,400 g/mol) in a phase-selective manner, enabling structural characterization at an unprecedented level of detail. This strategy utilizes the [2 + 2] photodimerization reaction of coumarin derivatives to covalently crosslink blends without the use of harsh reagents or disruptive thermal treatment, thus preserving the intricate network structure throughout curing. The resulting crosslinked bicontinuous microemulsions exhibited rubbery behavior at elevated temperatures, achieving an elastic shear modulus of nearly 1 MPa at 70 °C, owing to the presence of the three-dimensional co-continuous network morphology. The dimensional stabilization afforded by crosslinking further allowed the microstructure to be directly imaged by scanning electron microscopy and atomic force microscopy. Contrary to recent theoretical findings, the BμE appears in a wide temperature and compositional window, suggesting that it is a robust feature of these blends. As a proof of concept demonstrating both the utility of bicontinuous microemulsion-derived materials and versatility of this strategy toward broader applications in energy storage and transport, the uncrosslinked portion of a cured blend was extracted by washing and replaced with an ionic liquid; the resultant heterogeneous solid electrolyte exhibited a room-temperature conductivity of 2 mS/cm, approximately one-quarter that of the pure ionic liquid.

Gelation Dynamics during Photo-Cross-Linking of Polymer Nanocomposite Hydrogels

Embedding nanomaterials into polymer hydrogels enables the design of functional materials with tailored chemical, mechanical, and optical properties. Nanocapsules that protect interior cargo and disperse readily through a polymeric matrix have drawn particular interest for their ability to integrate chemically incompatible systems and to further expand the parameter space for polymer nanocomposite hydrogels. The properties of polymer nanocomposite hydrogels depend on the material composition and processing route, which were explored systematically in this work. The gelation kinetics of network-forming polymer solutions with and without silica-coated nanocapsules bearing polyethylene glycol (PEG) surface ligands were investigated using in situ dynamic rheology measurements. Network-forming polymers comprised either 4-arm or 8-arm star PEG with terminal anthracene groups, which dimerize upon irradiation with ultraviolet (UV) light. The PEG-anthracene solutions exhibited rapid gel formation upon UV exposure (365 nm); gel formation was observed as a crossover from liquid-like to solid-like behavior during in situ small-amplitude oscillatory shear rheology. This crossover time was non-monotonic with polymer concentration. Far below the overlap concentration (c/c* ≪ 1), spatially separated PEG-anthracene molecules were subject to forming intramolecular loops over intermolecular cross-links, thereby slowing the gelation process. Near the polymer overlap concentration (c/c* ∼ 1), rapid gelation was attributed to the ideal proximity of anthracene end groups from neighboring polymer molecules. Above the overlap concentration (c/c* > 1), increased solution viscosities hindered molecular diffusion, thereby reducing the frequency of dimerization reactions. Adding nanocapsules to PEG-anthracene solutions resulted in faster gelation than nanocapsule-free PEG-anthracene solutions with equivalent effective polymer concentrations. The final elastic modulus of nanocomposite hydrogels increased with nanocapsule volume fraction, signifying synergistic mechanical reinforcement by nanocapsules despite not being cross-linked into the polymer network. Overall, these findings quantify the impact of nanocapsule addition on the gelation kinetics and mechanical properties of polymer nanocomposite hydrogels, which are promising materials for applications in optoelectronics, biotechnology, and additive manufacturing.

Stimuli-responsive destructible polymeric hydrogels based on irreversible covalent bond dissociation

Covalently crosslinked stimuli-destructible hydrogels with the ability of irreversible bond dissociation have attracted great attentions due to their biodegradability, stability against hydrolysis, and controlled solubility upon insertion of desired triggers.

Recent Advances in Functional Polymers Containing Coumarin Chromophores

Natural and synthetic coumarin derivatives have gained increased attention in the design of functional polymers and polymer networks due to their unique optical, biological, and photochemical properties. This review provides a comprehensive overview over recent developments in macromolecular architecture and mainly covers examples from the literature published from 2004 to 2020. Along with a discussion on coumarin and its photochemical properties, we focus on polymers containing coumarin as a nonreactive moiety as well as polymer systems exploiting the dimerization and/or reversible nature of the [2πs + 2πs] cycloaddition reaction. Coumarin moieties undergo a reversible [2πs + 2πs] cycloaddition reaction upon irradiation with specific wavelengths in the UV region, which is applied to impart intrinsic healability, shape-memory, and reversible properties into polymers. In addition, coumarin chromophores are able to dimerize under the exposure to direct sunlight, which is a promising route for the synthesis and cross-linking of polymer systems under "green" and environment-friendly conditions. Along with the chemistry and design of coumarin functional polymers, we highlight various future application fields of coumarin containing polymers involving tissue engineering, drug delivery systems, soft robotics, or 4D printing applications.

Application of stimuli-responsive materials for extraction purposes

Stimuli-responsive materials, frequently designated as "smart/intelligent materials", can modify their structure or properties by either a biological, physical, or chemical stimulus which, if properly controlled, could be used for specific applications. Such materials have been studied and exploited in several fields, like electronics, photonics, controlled drugs administration, imaging and medical diagnosis, among others, as well as in Analytical Chemistry where they have been used as chromatographic stationary phases, as part of sensors and for extraction purposes. This review article pretends to provide an overview of the most recent applications of these materials (mostly polymeric materials) in sample preparation for extraction purposes, as well as to provide a general vision of the current state-of-the-art of this field, their potential use and future applications.

A novel strategy to polyurethanes with improved mechanical properties by photoactivation of amidocoumarin moieties

An attractive strategy involving photodimerization of a novel amidocoumarin moiety is presented to prepare polyurethane coatings with excellent mechanical properties. Two families of polyurethanes containing these chromophore units into soft or hard segments were easily synthesized by inserting a small fraction of amidocoumarin-diol (5 wt% or 10 wt%). A systematic study has been carried out comparing hard segment, chromophore content and the influence of this amidocoumarin unit within the hard or soft segment. For all synthetized polymers, mechanical properties of the coatings have been evaluated before and after an excitation of the coumarin units with UV light. The results show that the insertion of coumarin into the hard segment leads to a considerable improvement of the mechanical properties after irradiation. Additionally, the photochemical activity of amidocoumarin was studied by UV-Vis and Raman spectroscopies.

An attractive strategy involving photodimerization of a novel amidocoumarin moiety is presented to prepare polyurethane coatings with excellent mechanical properties.

Lower Critical Solution Temperature-Driven Self-Coacervation of Nonionic Polyester Underwater Adhesives

To enable attachment to underwater surfaces, aquatic fauna such as mussels and sandcastle worms utilize the advantages of coacervation to deliver concentrated protein-rich adhesive cocktails in an aqueous environment onto underwater surfaces. Recently, a mussel adhesive protein Mfp-3s, was shown to exhibit a coacervation-based adhesion mechanism. Current synthetic strategies to mimic Mfp-3s often involve complexation of oppositely charged polymers. Such complex coacervates are more sensitive to changes in pH and salt, thereby limiting their utility to narrow ranges of pH and ionic strength. In this study, by taking advantage of the lower critical solution temperature-driven coacervation, we have created mussel foot protein-inspired, tropoelastin-like, bioabsorbable, nonionic, self-coacervating polyesters for the delivery of photo-cross-linkable adhesives underwater and to overcome the challenges of adhesion in wet or underwater environments. We describe the rationale for their design and the underwater adhesive properties of these nonionic adhesives. Compared to previously reported coacervate adhesives, these "charge-free" polyesters coacervate in wide ranges of pH (3-12) and ionic strength (0-1 M NaCl) and rapidly (<300 s) adhere to substrates submerged underwater. The study introduces smart materials that mimic the self-coacervation and environmental stability of Mfp-3s and demonstrate the potential for biological adhesive applications where high water content, salts, and pH changes can be expected.

Coumarin-Containing Pillar[5]arenes as Multifunctional Liquid Crystal Macrocycles

Liquid crystal macrocycles (LCMs) combine the unique properties of liquid crystals with those associated with macrocyclic compounds-shape persistence and the capability of hosting small molecules. Herein, we investigate the grafting of coumarin-containing promesogenic moieties to pillar[5]arene as a strategy to obtain multifunctional LCMs. Pillar[5]arenes containing 10 and 30 coumarin units are glassy materials with nematic mesomorphism. Moreover, the coumarin moieties afford the pillar[5]arene derivatives with enhanced film-forming and photoresponsive properties. Photodimerization of the coumarin moieties results in cross-linked polymer networks, which can be used as alignment layers. Therefore, liquid-crystal coumarin-containing pillar[5]arenes represent a significant addition to the family of LCMs and may become useful for the development of engineered, hierarchical structures and materials.

Advances in Photoreactive Tissue Adhesives Derived from Natural Polymers

To stop blood loss and accelerate wound healing, conventional wound closure techniques such as sutures and staples are currently used in the clinic. These tissue-piercing wound closure techniques have several disadvantages such as the potential for causing inflammation, infections, and scar formation. Surgical sealants and tissue adhesives can address some of the disadvantages of current sutures and staples. An ideal tissue adhesive will demonstrate strong interfacial adhesion and cohesive strength to wet tissue surfaces. Most reported studies rely on the liquid-to-solid transition of organic molecules by taking advantage of polymerization and crosslinking reactions for improving the cohesive strength of the adhesives. Crosslinking reactions triggered using light are commonly used for increasing tissue adhesive strength since the reactions can be controlled spatially and temporally, providing the on-demand curing of the adhesives with minimum misplacements. In this review, we describe the recent advances in the field of naturally derived tissue adhesives and sealants in which the adhesive and cohesive strengths are modulated using photochemical reactions.

Coumarins into Polyurethanes for Smart and Functional Materials

Polyurethanes are of undoubted interest for the scientific community and the industry. Their outstanding versatility from tailor-made structures turns them into major polymers for use in a wide range of different applications. As with other polymers, new, emerging molecules and monomers with specific attributes can provide new functions and capabilities to polyurethanes. Natural and synthetic coumarin and its derivatives are characterised by interesting biological, photophysical and photochemical properties. Then, the polyurethanes can exploit those features of many coumarins which are present in their composition to achieve new functions and performances. This article reviews the developments in the proper use of the special properties of coumarins in polyurethanes to produce functional and smart materials that can be suitable for new specific applications.

Light-induced spherical to dumbbell-like morphology transition of coumarin-functionalized latex nanoparticles by a [2π + 2π] cycloaddition reaction: a fast and facile strategy to anisotropic geometry

Light-induced morphology transition of the functionalized spherical nanoparticles to anisotropic structures was achieved by dimerization of the surface coumarin molecules, which resulted in decreasing fluorescence intensities of coumarin moieties.

Synthesis and characterization of light-degradable bromocoumarin functionalized polycarbonates

The preparation, characterization and degradation properties of novel light-degradable bromocoumarin functionalized polycarbonates were investigated in the present work.

Remote Light-Responsive Nanocarriers for Controlled Drug Delivery: Advances and Perspectives

Engineering of smart photoactivated nanomaterials for targeted drug delivery systems (DDS) has recently attracted considerable research interest as light enables precise and accurate controlled release of drug molecules in specific diseased cells and/or tissues in a highly spatial and temporal manner. In general, the development of appropriate light-triggered DDS relies on processes of photolysis, photoisomerization, photo-cross-linking/un-cross-linking, and photoreduction, which are normally sensitive to ultraviolet (UV) or visible (Vis) light irradiation. Considering the issues of poor tissue penetration and high phototoxicity of these high-energy photons of UV/Vis light, recently nanocarriers have been developed based on light-response to low-energy photon irradiation, in particular for the light wavelengths located in the near infrared (NIR) range. NIR light-triggered drug release systems are normally achieved by using two-photon absorption and photon upconversion processes. Herein, recent advances of light-responsive nanoplatforms for controlled drug release are reviewed, covering the mechanism of light responsive small molecules and polymers, UV and Vis light responsive nanocarriers, and NIR light responsive nanocarriers. NIR-light triggered drug delivery by two-photon excitation and upconversion luminescence strategies is also included. In addition, the challenges and future perspectives for the development of light triggered DDS are highlighted.

Photocuring of 4-arm coumarin-functionalised monomers to form highly photoreversible crosslinked epoxy coatings

Highly photoreversible photocurable crosslinked epoxy coatings that can heal substantial surface damage were formed by the synthesis of unique monomers.

Reversible networks of degradable polyesters containing weak covalent bonds

The synthesis of reversible polyester networks based mainly on the Diels–Alder chemistry, alkene [2 + 2] cycloaddition or transesterification reactions and studies of their reversibility and its consequences are reviewed.

Photo-triggered polymer nanomedicines: From molecular mechanisms to therapeutic applications

The use of nanotechnology to improve treatment efficacy and reduce side effects is central to nanomedicine. In this context, stimuli-responsive drug delivery systems (DDS) such as chemical/physical gels or nanoparticles such as polymersomes, micelles or nanogels are particularly promising and are the focus of this review. Several stimuli have been considered but light as an exogenous trigger presents many advantages that are pertinent for clinical applications such as high spatial and temporal control and low cost. Underlying mechanisms required for the release of therapeutic agents in vitro and in vivo range from the molecular scale, namely photoisomerization, hydrophobicity photoswitching, photocleavage or heat generation via nanoheaters, through to the macromolecular scale. As well as these approaches, DDS destabilization, DDS permeation pore unblocking and formation are discussed.

Optically healable polyurethanes with tunable mechanical properties

The mechanical properties of polyurethanes can be nicely tuned by UV irradiation in a reversible way, endowing the polyurethanes with optical healing properties.

Direct Observation of the Interplay of Catechol Binding and Polymer Hydrophobicity in a Mussel-Inspired Elastomeric Adhesive

Marine organisms such as mussels have mastered the challenges in underwater adhesion by incorporating post-translationally modified amino acids like l-3,4-dihydroxyphenylalanine (DOPA) in adhesive proteins. Here we designed a catechol containing elastomer adhesive to identify the role of catechol in interfacial adhesion in both dry and wet conditions. To decouple the adhesive contribution of catechol to the overall adhesion, the elastomer was designed to be cross-linked through [2 + 2] photo-cycloaddition of coumarin. The elastomer with catechol moieties displayed a higher adhesion strength than the catechol-protected elastomer. The contact interface was probed using interface-sensitive sum frequency generation spectroscopy to explore the question of whether catechol can displace water and bond with hydrophilic surfaces. The spectroscopy measurements reveal that the maximum binding energy of the catechol and protected-catechol elastomers to sapphire substrate is 7.0 ± 0.1 kJ/(mole of surface O-H), which is equivalent to 0.10 J/m2. The higher dry and wet adhesion observed in the macroscopic adhesion measurements for the catechol containing elastomer originates from multiple hydrogen bonds of the catechol dihydroxy groups to the surface. In addition, our results show that catechol by itself does not remove the confined interstitial water. In these elastomers, it is the hydrophobic groups that help in partially removing interstitial water. The observation of the synergy between catechol binding and hydrophobicity in enabling the mussel-inspired soft adhesive elastomer to stick underwater provides a framework for designing materials for applications in tissue adhesion and moist-skin wearable electronics.

Coumarin-Caged Polyphosphazenes with a Visible-Light Driven On-Demand Degradation

Polymers that, upon photochemical activation with visible light, undergo rapid degradation to small molecules are described. Through functionalization of a polyphosphazene backbone with pendant coumarin groups sensitive to light, polymers which are stable in the dark could be prepared. Upon irradiation, cleavage of the coumarin moieties exposes carboxylic acid moieties along the polymer backbone. The subsequent macromolecular photoacid is found to catalyze the rapid hydrolytic degradation of the polyphosphazene backbone. Water-soluble and non-water-soluble polymers are reported, which due to their sensitivity toward light in the visible region could be significant as photocleavable materials in biological applications.

Photoreversible Covalent Hydrogels for Soft-Matter Additive Manufacturing

Reversible covalent chemistry provides access to robust materials with the ability to be degraded and reformed upon exposure to an appropriate stimulus. Photoresponsive units are attractive for this purpose, as the spatial and temporal application of light is easily controlled. Coumarin derivatives undergo a [2 + 2] cycloaddition upon exposure to long-wave UV irradiation (365 nm), and this process can be reversed using short-wave UV light (254 nm). Therefore, polymers cross-linked by coumarin groups are excellent candidates as reversible covalent gels. In this work, copolymerization of coumarin-containing monomers with the hydrophilic comonomer N, N-dimethylacrylamide yielded water-soluble, linear polymers that could be cured with long-wave UV light into free-standing hydrogels, even in the absence of a photoinitiator. Importantly, the gels were reverted back to soluble copolymers upon short-wave UV irradiation. This process could be cycled, allowing for recycling and remolding of the hydrogel into additional shapes. Further, this hydrogel can be imprinted with patterns through a mask-based, post-gelation photoetching method. Traditional limitations of this technique, such as the requirement for uniform etching in one direction, have been overcome by combining these materials with a soft-matter additive manufacturing methodology. In a representative application of this approach, we printed solid structures in which the interior coumarin-cross-linked gel is surrounded by a nondegradable gel. Upon exposure to short-wave UV irradiation, the coumarin-cross-linked gel was reverted to soluble prepolymers that were washed away to yield hollow hydrogel objects.

Wavelength-Selective Coupling and Decoupling of Polymer Chains via Reversible [2 + 2] Photocycloaddition of Styrylpyrene for Construction of Cytocompatible Photodynamic Hydrogels

Reversible photocycloaddition reactions have previously been employed in chemical cross-linking for the preparation of biomaterial scaffolds. However, the processes require activation by high-energy UV light, rendering them unsuitable for modification in biological environments. Here we demonstrate that the [2 + 2] photocycloaddition of styrylpyrene can be activated by visible light at λ = 400-500 nm, enabling rapid and effective conjugation and cross-linking of poly(ethylene glycol) (PEG) in water and under mild irradiation conditions (I = 20 mW cm^-2). Notably, the reversion of the cycloaddition can be triggered by low-energy UV light at λ = 340 nm, which allows for efficient cleavage of the dimer adduct. Using this wavelength-gated reversible photochemical reaction we are able to prepare PEG hydrogels and modulate their mechanical properties in a bidirectional manner. We also demonstrate healing of the fractured hydrogel by external light triggers. Furthermore, we show that human mesenchymal stem cells can be encapsulated within the gels with high viability post encapsulation. This photochemical approach is therefore anticipated to be highly useful in studies of cell mechanotransduction, with relevance to disease progression and tissue regeneration.

Sub-micrometer Sized, 3D-Surface-attached Polymer Networks by Microcontact Printing: Using UV-Crosslinking Efficiency to Tune Structure Height

The lateral dimensions of micro- and nanostructures obtained by microcontact printing (μCP) can be easily varied by selecting stamps with the desired spacing and pattern. However, the height of these structures cannot be tuned as easily, and in most cases only 2D structures are obtained. Here, we show how the chemical cross-linking properties of polymer inks designed for μCP can be used to obtain 3D structures with heights ranging from 3 to 750 nm using the same μCP stamps. This is technologically relevant because the ink concentration affects the quality and resolution of the printed image, and therefore can only be varied in a certain range. By exploiting the cross-linking efficiency to tune the height, an additional parameter is available to reach the desired structure height without compromising the image quality. The inks were made from copolymers containing a low percentage of different UV cross-linkable repeat units: nitrobenzoxadiazole (NBD), coumarin (COU), and/or benzophenone (BP). The base polymer of the here presented model system was an antimicrobially active poly(oxanorbornene) (SMAMP), however the concept should be transferable to many other polymer backbones. We describe the fabrication and characterization of the printed micro- and nanostructures made from pure SMAMP, NBD-SMAMP, coumarin-SMAMP, BP-SMAMP, BP-NBD-SMAMP and BP-coumarin-SMAMP polymer inks. The photo-dimerization of COU during UV irradiation at λ = 254 nm was confirmed by UV-Vis spectroscopy. Since NBD and COU are fluorescent, the polymer could be visualized by fluorescence microscopy. Additionally, their height profiles were measured by atomic force microscopy (AFM). The heights of the 3D surface-attached polymer networks obtained from the here presented polymer inks correlated with the gel-content of the corresponding unstructured polymer layers, and thus with the cross-linking efficiency of the NBD, COU and BP cross-linkers. Due to being covalently cross-linked, these 3D-surface attached polymer structures were solvent-stable and stable in aqueous surroundings.

Improvement and tuning of the performance of light-healable polymers by variation of the monomer content

High-performing crosslinked epoxy coatings that possess room temperature self-healing ability by the use of a newly synthesised dynamic diamine crosslinker.

Photochemically Driven Polymeric Network Formation: Synthesis and Applications

Polymeric networks have been intensely investigated and a large number of applications have been found in areas ranging from biomedicine to materials science. Network fabrication via light-induced reactions is a particularly powerful tool, since light provides ready access to temporal and spatial control, opening an array of synthetic access routes for structuring the network geometry as well as functionality. Herein, the most recent light-induced modular reactions and their use in the formation of precision polymeric networks are collated. The synthetic strategies including photoinduced thiol-based reactions, Diels-Alder systems, and photogenerated reactive dipoles, as well as photodimerizations, are discussed in detail. Importantly, applications of the fabricated networks via the aforementioned reactions are highlighted with selected examples. Concomitantly, we provide future directions for the field, emphasizing the most critically required advances.

Nontoxic Cationic Coumarin Polyester Coatings Prevent Pseudomonas aeruginosa Biofilm Formation

The rapid increase in bacterial infections and antimicrobial resistance is a growing public health concern. Infections arising from bacterial contamination of surgical tools, medical implants, catheters, and hospital surfaces can potentially be addressed by antimicrobial polymeric coatings. The challenge in developing such polymers for in vivo use is the ability to achieve high antimicrobial efficacy while at the same time being nontoxic to human cells. Although several classes of antimicrobial polymers have been developed, many of them cannot be used in the clinical setting due to their nonselective toxicity toward bacteria and mammalian cells. Here, we demonstrate that coumarin polyesters with cationic pendant groups are very effective against Gram negative Pseudomonas aeruginosa. Coumarin polyesters with pendant cationic amine groups were coated onto glass coverslips and tested for their antimicrobial activity against P. aeruginosa colonization of the surface. The results demonstrate that the cationic coumarin polyester kills the surface attached bacterial cells preventing biofilm formation but does not show any hemolytic activity or discernible toxicity toward mammalian cells. The antimicrobial polyesters described in this work have several advantages desired in antimicrobial coatings such as high antimicrobial activity, low toxicity toward mammalian cells, visualization and ease of synthesis and fabrication, all of which are necessary for translation to the clinic.

Synthesis of cinnamoyl and coumarin functionalized aliphatic polycarbonates

With the objective of generating photo-responsive polymers, carbonate monomers with pendant cinnamoyl or coumarin moieties, which are capable of photo-reversible dimerization, were synthesized.

Photoresponsive liquid crystalline polymer single-chain nanoparticles

Single-chain nanoparticles prepared from a side-chain liquid crystalline polymer bearing azobenzene moieties can be multifunctional.

pH-Sensitive Nanoaggregates for Site-Specific Drug-Delivery as Well as Cancer Cell Imaging

Multifunctional polymeric nanoaggregates could enable targeted cancer therapy and imaging, which eventually facilitate monitoring of the therapeutic effect. A fluorescent nanoaggregate is constructed for theranostic application. Chlorambucil (Chl), a fluorescent inactive chemotherapeutic agent, is covalently attached to the nanoaggregate for therapeutic action. The pyrene (Py) motif is also covalently attached to the nanoaggregates, with the motivation of cancer cell imaging. This nanoaggregate is further functionalized with biotin (Btn) for receptor-mediated drug delivery. The efficiency of this system is evaluated by in vitro cell studies to prove its receptor-mediated internalization as well as theranostic capabilities. This newly designed nanocarrier, Nor-Chl-Py-Btn (Nor, norbornene), has the ability to combine both therapeutic and diagnostic capabilities into a single polymer that offers existing prospects for the development of nanomedicine.

Writing and erasing hidden optical information on covalently modified cellulose paper

A strategy for preparing photoresponsive cellulose paper enabling the storage of short-lived optical data by covalent means is disclosed.

Multivalent photo-crosslinkable coumarin-containing polybenzoxazines exhibiting enhanced thermal and hydrophobic surface properties

Mono-, bi-, and trivalent coumarin-containing benzoxazine monomers were synthesized by facile Mannich reactions of 4-methyl-7-hydroxycoumarin and paraformaldehyde with aniline, bisphenol A–NH₂, and 1,3,5-tri(4-aminobenzene).

Photodegradable and size-tunable single-chain nanoparticles prepared from a single main-chain coumarin-containing polymer precursor

A polyester bearing coumarin moieties in the main chain was used to prepare photodegradable single-chain nanoparticles (SCNPs) of variable sizes. While the intra-chain photodimerization of the chromophore determines the size of SCNPs, the photocleavage occurring under UV irradiation at a different wavelength breaks down the ultra-small nanoparticles.