Thermoresponsive Oligo(ethylene glycol) Functionalized Poly-l-cysteine

Nonionic Water-Soluble Oligo(ethylene glycol)-Modified Polypeptides with a β-Sheet Conformation

The secondary structures of polypeptides, such as an α-helix and a β-sheet, often impart specific properties and functions, making the regulation of their secondary structures of great significance. Particularly, water-soluble polypeptides bearing a β-sheet conformation are rare and challenging to achieve. Here, a series of oligo(ethylene glycol)-modified lysine N-carboxylic anhydrides (EGmK-NCA, where m = 1-3) and the corresponding polymers EGmKn are synthesized, with urethane bonds as the linker between the side-chain EG and lysine. The secondary structure of EGmKn is delicately regulated by both m and n, the length (number of repeating units) of EG and the degree of polymerization (DP), respectively. Among them, EG2Kn adopts a β-sheet conformation with good water solubility at an appropriate DP and forms physically cross-linked hydrogels at a concentration as low as 1 wt %. The secondary structures of EG1Kn can be tuned by DP, exhibiting either a β-sheet or an α-helix, whereas EG3Kn appears to a adopt pure and stable α-helix with no dependence on DP. Compared to previous works reporting EG-modified lysine-derived polypeptides bearing exclusively an α-helix conformation, this work highlights the important and unexpected role of the urethane connecting unit and provides useful case studies for understanding the secondary structure of polypeptides.

Efficient Catalyst-Free One-Pot Synthesis of Polysaccharide-Polypeptide Hydrogels in Aqueous Solution

The preparation of polysaccharide-peptide hydrogels usually involves multiple synthetic steps, thus reducing the effectiveness and practicality of these approaches. Inspired by recent discoveries in aqueous N-carboxyanhydride (NCA) ring-opening polymerization (ROP) and ring-opening polymerization-induced nanogelation, we present an aqueous one-pot strategy to prepare polysaccharide-polypeptide hydrogels. In this study, water-soluble polysaccharide carboxymethyl chitosan is used as the macromolecular initiator to prepare polysaccharide-polypeptide copolymers through the aqueous ROP of NCA. The catalyst-free approach afforded hydrogels with properties that could be controlled by adjusting the type and amount of NCA used, with the elastic modulus ranging from 50 Pa to 18000 Pa. The hydrogen bond-cross-linked hydrogel exhibited self-healing and injectable properties. Morphology characterization revealed that micelles were formed in the early stage of reaction, suggesting that the polymerization follows an aqueous ring-opening polymerization-induced self-assembly (ROPISA) mechanism and that aggregation of micelles during the reaction caused the gelation. Moreover, the hydrogels displayed high swelling ratios (>95% water content), and hemolysis and cytotoxicity experiments demonstrated that the hydrogels had excellent biocompatibility, indicating their potential in medical applications.

Mirror Image Mucins and Thio Mucins with Tunable Biodegradation

Mucin glycoproteins are the major component of mucus and are integral to the cellular glycocalyx. Mucins play diverse roles in health and disease, are an important element in epithelial tissue models, and have broad therapeutic potential. All mucin applications are currently challenged by their inherent structural heterogeneity and degradation by proteases. In this study, we describe the synthesis and study of chemically defined mucin analogues bearing native glycans. We utilized combinations of enantiomer amino acids and glycan thioether linkages to achieve tunable proteolysis while maintaining cytocompatibility and binding activity. Structural characterization revealed a previously unknown mirror-image helix and sheds light on the molecular drivers of glycoprotein conformation. This work represents an important step toward the development of artificial mucins for biomedical applications.

Intrinsically fluorescent polyureas toward conformation-assisted metamorphosis, discoloration and intracellular drug delivery

Peptidomimetic polymers have attracted increasing interest because of the advantages of facile synthesis, high molecular tunability, resistance to degradation, and low immunogenicity. However, the presence of non-native linkages compromises their ability to form higher ordered structures and protein-inspired functions. Here we report a class of amino acid-constructed polyureas with molecular weight- and solvent-dependent helical and sheet-like conformations as well as green fluorescent protein-mimic autofluorescence with aggregation-induced emission characteristics. The copolymers self-assemble into vesicles and nanotubes and exhibit H-bonding-mediated metamorphosis and discoloration behaviors. We show that these polymeric vehicles with ultrahigh stability, superfast responsivity and conformation-assisted cell internalization efficiency could act as an “on-off” switchable nanocarrier for specific intracellular drug delivery and effective cancer theranosis in vitro and in vivo. This work provides insights into the folding and hierarchical assembly of biomacromolecules, and a new generation of bioresponsive polymers and nonconventional luminescent aliphatic materials for diverse applications.

Biomimetic materials are of interest but can often suffer from limitations caused by the non-native linkages used. Here, the authors report on the creation of amino acid constructed polyureas which can self-assemble into vesicles and nanotubes with aggregation induced fluorescence and the potential for drug delivery applications.

NIPAm-Based Modification of Poly(L-lysine): A pH-Dependent LCST-Type Thermo-Responsive Biodegradable Polymer

Polylysine is a biocompatible, biodegradable, water soluble polypeptide. Thanks to the pendant primary amines it bears, it is susceptible to modification reactions. In this work Poly(L-lysine) (PLL) was partially modified via the effortless free-catalysed aza-Michael addition reaction at room temperature by grafting N-isopropylacrylamide (NIPAm) moieties onto the amines. The resulting PLL-g-NIPAm exhibited LCST-type thermosensitivity. The LCST can be tuned by the NIPAm content incorporated in the macromolecules. Importantly, depending on the NIPAm content, LCST is highly dependent on pH and ionic strength due to ionization capability of the remaining free lysine residues. PLL-g-NIPAm constitutes a novel biodegradable LCST polymer that could be used as “smart” block in block copolymers and/or terpolymers, of any macromolecular architecture, to design pH/Temperature-responsive self-assemblies (nanocarriers and/or networks) for potential bio-applications.

Poly(l-cysteine) Peptide Amphiphile Derivatives Containing Disulfide Bonds: Synthesis, Self-Assembly-Induced β-Sheet Nanostructures, pH/Reduction Dual Response, and Drug Release

Three disulfide bond-containing peptide amphiphiles (PA1-3) with different lengths of alkyl tails (PA1 for C₆, PA2 for C₁₂, and PA3 for C₁₈) were synthesized by ring-opening polymerization of α-amino acid N-carboxyanhydride followed by post-polymerization modification. The peptide segments were composed of 3-mercaptopropionic acid-modified poly(l-cysteine) [P(Cys-SS-CH₂CH₂COOH)]. We characterized the chemical structure and molecular parameters by ¹H NMR, ¹³C NMR, gel permeation chromatography, Fourier transform infrared spectroscopy, and circular dichroism spectroscopy. It is found that alkyl-P(Cys-SS-CH₂CH₂COOH) mainly presents a β-sheet conformation at the solid state. However, the PAs present predominant random coils at pH 7.4 in aqueous solutions. The β-sheet conformation increased dramatically when the concentration of the PA exceeded its critical micelle concentration (ca. 0.3 mg/mL for PA3), indicating the formation of self-assembly-induced β-sheet nanostructures. Elongation of the alkyl chain length or a decrease of the pH of the PA solution can promote the formation of the β-sheet conformation. The three PAs can self-assemble into spherical micelles or nanofibrous hydrogels, which can be utilized as nanocarriers for systemic drug delivery or implants for localized drug delivery, respectively. Cisplatin (CDDP) was loaded as a model medicine to examine the drug delivery potential of PA3. We found that the CDDP-loaded PA3 micelles are stable at pH 7.4, have a spherical morphology with a hydrodynamic diameter of ca. 52 nm, and accomplish pH/reduction dual-responsive release of CDDP. In addition, alkyl-P(Cys-SS-CH₂CH₂COOH) can self-assemble into nanofibrous hydrogels at pH 5.0-6.0 or upon the addition of certain metal ions and show excellent dynamic reversibility. Moreover, the CDDP-loaded PA3 hydrogel exhibits a sustained release profile and a nearly linear release over 48 h. In vitro cytotoxicity of PA3 also indicates its nontoxicity. Thus, our findings suggest that alkyl-P(Cys-SS-CH₂CH₂COOH) has great potential for both systemic and localized delivery of therapeutics.

Amino acid derived biopolymers: Recent advances and biomedical applications

Over the past few years, amino acids (AA) have emerged as promising biomaterials for the synthesis of functional polymers. Owing to the diversity of functional groups in amino acids, various polymerization methods may be used to make a wide range of well-defined functional amino-acid/peptide-based optically active polymers with varying polymer lengths, compositions, and designs. When incorporated with chirality and self-assembly, they offer a wide range of applications and are particularly appealing in the field of drug delivery, tissue engineering, and biosensing. There are several classes of these polymers that include polyamides (PA), polyesters (PE), poly(ester-amide)s (PEA)s, polyurethanes (PU)s, poly(depsipeptide)s (PDP)s, etc. They offer the ability to control functionality, conjugation, crosslinking, stimuli responsiveness, and tuneable mechanical/thermal properties. In this review, we present the recent advancements in the synthesis strategies for obtaining these amino acid-derived bio-macromolecules, their self-assembly properties, and the wealth of prevalent applications.

Open-air synthesis of oligo(ethylene glycol)-functionalized polypeptides from non-purified N-carboxyanhydrides

With PEG-like properties, such as hydrophilicity and stealth effect against protein absorption, oligo(ethylene glycol) (OEG)-functionalized polypeptides have emerged as a new class of biomaterials alternative to PEG with polypeptide-like properties. Synthesis of this class of materials, however, has been demonstrated very challenging, as the synthesis and purification of OEG-functionalized N-carboxyanhydrides (OEG-NCAs) in high purity, which is critical for the success in polymerization, is tedious and often results in low yield. OEG-functionalized polypeptides are therefore only accessible to a few limited labs with expertise in this specialized NCA chemistry and materials. Here, we report the controlled synthesis of OEG-functionalized polypeptides in high yield directly from the OEG-functionalized amino acids via easy and reproducible polymerization of non-purified OEG-NCAs. The prepared amphiphilic block copolypeptides can self-assemble into narrowly dispersed nanoparticles in water, which show properties suitable for drug delivery applications.

Recent Advances in Thermoresponsive OEGylated Poly(amino acid)s

Thermoresponsive polymers have been widely studied in the past decades due to their potential applications in biomedicine, nanotechnology, and so on. As is known, poly(N-isopropylacrylamide) (PNIPAM) and poly(oligo(ethylene glycol)methacrylates) (POEGMAs) are the most popular thermoresponsive polymers, and have been studied extensively. However, more advanced thermoresponsive polymers with excellent biocompatibility, biodegradability, and bioactivity also need to be developed for biomedical applications. OEGylated poly(amino acid)s are a kind of novel polymer which are synthesized by attaching one or multiple oligo(ethylene glycol) (OEG) chains to poly(amino acid) (PAA).These polymers combine the great solubility of OEG, and the excellent biocompatibility, biodegradability and well defined secondary structures of PAA. These advantages allow them to have great application prospects in the field of biomedicine. Therefore, the study of OEGylated poly(amino acid)s has attracted more attention recently. In this review, we summarized the development of thermoresponsive OEGylated poly(amino acid)s in recent years, including the synthesis method (such as ring-opening polymerization, post-polymerization modification, and Ugi reaction), stimuli-response behavior study, and secondary structure study. We hope that this periodical summary will be more conducive to design, synthesis and application of OEGylated poly(amino acid)s in the future.

Secondary Structure-Driven Self-Assembly of Thiol-Reactive Polypept(o)ides

Secondary structure formation differentiates polypeptides from most of the other synthetic polymers, and the transitions from random coils to rod-like α-helices or β-sheets represent an additional parameter to direct self-assembly and the morphology of nanostructures. We investigated the influence of distinct secondary structures on the self-assembly of reactive amphiphilic polypept(o)ides. The individual morphologies can be preserved by core cross-linking via chemoselective disulfide bond formation. A series of thiol-responsive copolymers of racemic polysarcosine-block-poly(S-ethylsulfonyl-dl-cysteine) (pSar-b-p(dl)Cys), enantiopure polysarcosine-block-poly(S-ethylsulfonyl-l-cysteine) (pSar-b-p(l)Cys), and polysarcosine-block-poly(S-ethylsulfonyl-l-homocysteine) (pSar-b-p(l)Hcy) was prepared by N-carboxyanhydride polymerization. The secondary structure of the peptide segment varies from α-helices (pSar-b-p(l)Hcy) to antiparallel β-sheets (pSar-b-p(l)Cys) and disrupted β-sheets (pSar-b-p(dl)Cys). When subjected to nanoprecipitation, copolymers with antiparallel β-sheets display the strongest tendency to self-assemble, whereas disrupted β-sheets hardly induce aggregation. This translates to worm-like micelles, solely spherical micelles, or ellipsoidal structures, as analyzed by atomic force microscopy and cryogenic transmission electron microscopy, which underlines the potential of secondary structure-driven self-assembly of synthetic polypeptides.

Transition of Conformation and Solubility in β-Sheet-Structured Poly(l-cysteine)s with Methylthio or Sulfonium Pendants

Poly(l-cysteine)s with methylthio pendants (PMTLCs) were synthesized by ring-opening polymerization of a new l-cysteine-based N-carboxyanhydride. The thioether bonds of PMTLC can be readily oxidized by H₂O₂ yielding water-soluble PMTLC^OX. The methylthio groups can undergo an alkylation reaction using methyl iodide and a subsequent ion-exchange reaction yielding sulfonium-based polypeptides (PPLC-DMS-X, where X = I, BF₄). PPLC-DMS-X showed upper critical solution temperature-type thermo- and oxidation-responsive properties in aqueous solutions. Both PMTLC and PPLC-DMS-X showed oxidation-induced β-sheet to α-helix transitions. The absorbance of PPLC-DMS-I and methyl orange aqueous solution displayed a significant linear correlation with temperature, which makes the sulfonium-based polypeptides good candidates in the field of temperature sensors.

Structure and Oxidation Effects on Conformation and Thermoresponsiveness of the OEGylated Poly(glutamic acid)-Bearing Side-Chain Thioether Linkers

A series of side-chain thioether-linked OEGylated poly(glutamic acid) (PGAs) have been synthesized by "thiol-ene" synthetic methodology, where both the oligo-ethylene glycol (OEG) length and the hydrophobic linkers at the side chains are varied to learn how these structural features affect the secondary structure and thermoresponsive behaviors in water. Before side-chain oxidation, the structural factors affecting the α-helicity include the backbone length, the OEG length, and the hydrophobic linkers' length at the side chains; however, the OEG length plays the most crucial role among these factors because longer OEG around the peripheral side chains can stop water penetration into the backbone to disturb the intramolecular H bonds, which finally allows stabilizing the α-helix; after the oxidation, the polypeptides show increased α-helicity because of the enhanced hydrophilicity. More interestingly, a rare oxidation-induced conformation transition from the ordered β-sheet to the ordered α-helix can be achieved. In addition, only the OEGylated poly(glutamic acids) (PGAs) with shorter hydrophobic linkers and longer OEG can display the thermoresponsive properties before the oxidation but the subsequent oxidation can cause the polypeptides bearing longer hydrophobic linkers to exhibit the thermosensitivity since sulfone formation at the side chain can lead to final hydrophilicity-hydrophobicity balance. This work is meaningful to understand the secondary structure-associated solution behaviors of the synthetic polypeptides.

Anion-induced thermoresponsiveness in cationic polycysteine and DNA binding

This study describes the synthesis of an l-cysteine-based water-soluble cationic polypeptide, an investigation of its thermoresponsive behaviour in the presence of added anions and its polyplexation with DNA.

Thermoresponsive Polypeptoids

Stimuli-responsive polymers have been widely studied in many applications such as biomedicine, nanotechnology, and catalysis. Temperature is one of the most commonly used external triggers, which can be highly controlled with excellent reversibility. Thermoresponsive polymers exhibiting a reversible phase transition in a controlled manner to temperature are a promising class of smart polymers that have been widely studied. The phase transition behavior can be tuned by polymer architectures, chain-end, and various functional groups. Particularly, thermoresponsive polypeptoid is a type of promising material that has drawn growing interest because of its excellent biocompatibility, biodegradability, and bioactivity. This paper summarizes the recent advances of thermoresponsive polypeptoids, including the synthetic methods and functional groups as well as their applications.

Racemic S-(ethylsulfonyl)-dl-cysteine N-Carboxyanhydrides Improve Chain Lengths and Monomer Conversion for β-Sheet-Controlled Ring-Opening Polymerization

The secondary structure formation of polypeptides not only governs folding and solution self-assembly but also affects the nucleophilic ring-opening polymerization of α-amino acid-N-carboxyanhydrides (NCAs). Whereby helical structures are known to enhance polymerization rates, β-sheet-like assemblies reduce the propagation rate or may even terminate chain growth by precipitation or gelation. To overcome these unfavorable properties, racemic mixtures of NCAs can be applied. In this work, racemic S-(ethylsulfonyl)-dl-cysteine NCA is investigated for the synthesis of polypeptides, diblock and triblock copolypept(o)ides. In contrast to the polymerization of stereoregular S-(ethylsulfonyl)-l-cysteine NCA, the reaction of S-(ethylsulfonyl)-dl-cysteine NCA proceeds with a rate constant of up to k_p  = 1.70 × 10^-3 L mol^-1 s ^-1 and is slightly faster than the enatiopure polymerization. While the polymerization of S-(ethylsulfonyl)-l-cysteine NCA suffers from incomplete monomer conversion and degrees of polymerization (DPs) limited to 30-40, racemic mixtures yield polypeptides with DPs of up to 102 with high conversion rates and well-defined dispersities (1.2-1.3). The controlled living nature of the ring-opening polymerization of S-(ethylsulfonyl)-dl-cysteine NCA thus enables the synthesis of triblock copolymers by sequential monomer addition. This methodology allows for precise control over DPs of individual blocks and yields uniform triblock copolymers with symmetric molecular weight distributions at a reduced synthetic effort.

Vesicular assemblies of thermoresponsive amphiphilic polypeptide copolymers for guest encapsulation and release

Thermoresponsive amphiphilic polypeptide copolymers are synthesized via different polymerization techniques for their self-assembly into vesicular aggregates for guest encapsulation and release.

Dual stimuli-responsive polypeptide prepared by thiol-ene click reaction of poly(l-cysteine) and N, N-dimethylaminoethyl acrylate

Stimuli-responsive polymers that can undergo conformational changes with external triggers have enabled themselves as smart materials for various utilizations, among which biodegradability is of particular importance to be engineered for biomedical application. In this study, a thermo and pH dual responsive polypeptide (N, N-dimethylaminoethyl acrylate-modified poly(l-cysteine)) (PLC-g-DMAEA) was prepared by the combination of N-carboxyanhydride ring-open polymerization and thiol-ene click chemistry. The biodegradable poly(l-cysteine) (PLC) with pendant thiol groups provided an easily clickable backbone for postmodification, which was demonstrated by reacting with a well-known monomer of N, N-dimethylaminoethyl acrylate (DMAEA) to achieve both temperature and pH responsiveness. The irreversible thermo-response of PLC-g-DMAEA could be attributed to the ordered β-sheets formed upon heating, leading to the trapped side groups with poor water accessibility. Moreover, this copolymer precipitated at pH ranging from 7.5 to 9.7, but protonation of tertiary amine groups (pH < 7.5) and salt forming of masked thiol groups (pH > 9.7) rendered it soluble in water. Our results revealed that a ready available vinyl monomer could be easily clicked onto the biodegradable PLC and its stimuli responsiveness would be reserved. Moreover, the primary and secondary structures of PLC might influence the conformation, thus leading to the unique responsive behavior of the resulted copolymer.

Synthesis and characterization of a polyisocyanide with thioether pendant caused an oxidation-triggered helix-to-helix transition

Stimuli responsive helical polymers have attracted wide attention and many polymers responsive to the external stimuli have been synthesized. But, only a few examples have been reported regarding the redox-induced helicity inversion helical polymers. The polyisocyanide including thioether pendant (poly-MBTIP) was synthesized by polymerization of methyl (R)-3-(benzylthio)-2-isocyanopropanoate (MBTIP) monomer using NiCl2·6H2O as catalytic agent in dry DCM. The chiroptical and oxidation properties of the poly-MBTIP are investigated. The poly-MBTIPs exhibit intense specific optical rotations and Cotton effects compared to the monomer, strongly suggesting a helical conformation of the polymer backbone. Additionally, the thioether pendant of poly-MBTIP backbone was oxidized to sulfoxide group by H2O2. Interestingly, the specific optical rotations and Cotton effects of poly-MBTIP oxidized are reversed, probably suggesting a helical conformation inversion.

Amphiphilic bromelain-synthesized oligo-phenylalanine grafted with methoxypolyethylene glycol possessing stabilizing thermo-responsive emulsion properties

A thermo-responsive amphiphile was developed from oligo-phenylalanine [oligo(Phe)]. The hydrophobic moiety of the amphiphile, oligo(Phe) was synthesized via reverse hydrolysis catalyzed by bromelain in dimethyl sulfoxide and dioxane solutions. The production of oligo(Phe) increased by 80.7% by screening suitable reaction conditions. The average degree of polymerization of oligo(Phe) was determined to be four by ¹H NMR. By grafting with aldehyde-ended methoxypolyethylene glycol (mPEG), oligo(Phe) was converted to amphiphilic oligo(Phe)-mPEG. The surface tension of oligo(Phe)-mPEG solution increased with decreasing chain length of the mPEG moiety. Cytotoxicity studies showed oligo(Phe)-mPEGs are biocompatible. On varying temperature, a reversible phase transition of oligo(Phe)-mPEG solutions could be observed. N-octane-in-water emulsions and 0.5% beta-carotene containing squalene-in-water emulsions stabilized by oligo(Phe)-mPEGs occurred at 25 °C but de-emulsification took place at >40 °C. Emulsification could be restored once the separated mixture cooled and re-homogenized. The emulsification/de-emulsification cycling could be repeated many times. The time required for de-emulsification decreased with elevated temperature but increased with a reduced concentration of oligo(Phe)-mPEGs and a reduction in the chain length of the mPEG moiety.

Synthesis of water soluble and multi-responsive selenopolypeptides via ring-opening polymerization of N-carboxyanhydrides

Synthesis of selenopolypeptides via ring opening polymerization of N-carboxyanhydrides.

A novel thermogel system of self-assembling peptides manipulated by enzymatic dephosphorylation

A novel thermogel system of self-assembling peptides was created by enzyme-instructed self-assembly (EISA), which was useful for 3D cell culture.

Amino acid-derived stimuli-responsive polymers and their applications

The recent advances achieved in the study of various stimuli-responsive polymers derived from natural amino acids have been reviewed.

Strategies to Fabricate Polypeptide-Based Structures via Ring-Opening Polymerization of N-Carboxyanhydrides

In this review, we provide a general and clear overview about the different alternatives reported to fabricate a myriad of polypeptide architectures based on the ring-opening polymerization of N-carbonyanhydrides (ROP NCAs). First of all, the strategies for the preparation of NCA monomers directly from natural occurring or from modified amino acids are analyzed. The synthetic alternatives to prepare non-functionalized and functionalized NCAs are presented. Protection/deprotection protocols, as well as other functionalization chemistries are discussed in this section. Later on, the mechanisms involved in the ROP NCA polymerization, as well as the strategies developed to reduce the eventually occurring side reactions are presented. Finally, a general overview of the synthetic strategies described in the literature to fabricate different polypeptide architectures is provided. This part of the review is organized depending on the complexity of the macromolecular topology prepared. Therefore, linear homopolypeptides, random and block copolypeptides are described first. The next sections include cyclic and branched polymers such as star polypeptides, polymer brushes and highly branched structures including arborescent or dendrigraft structures.

Supramolecular Interactions Induce Unexpectedly Strong Emissions from Triphenylamine-Functionalized Polytyrosine Blended with Poly(4-vinylpyridine)

In this study, we synthesized a triphenylamine-functionalized polytyrosine (PTyr-TPA) through living ring opening polymerization with 4,4′-diamino-4″-methoxytriphenylamine (TPA-NH₂) as an initiator, and used Fourier transform infrared (FTIR) and nuclear magnetic resonance spectroscopy to confirm the chemical structure. Photoluminescence spectroscopy revealed the photophysical properties of TPA-NH₂ and PTyr-TPA and suggested that TPA-NH₂ exhibited aggregation-caused quenching; in contrast, attaching the initiator to the rigid rod conformation of the PTyr segments caused PTyr-TPA to display aggregation-induced emission behavior. Differential scanning calorimetry revealed single glass transition temperatures for miscible PTyr-TPA/P4VP blends, the result of intermolecular hydrogen bonding between the pyridine units of P4VP and the phenolic OH units of PTyr-TPA, as confirmed through FTIR spectroscopic analyses. Furthermore, the chain behavior of PTyr-TPA transformed from a β-sheet conformation to random coils after blending with P4VP, as determined using wide-angle X-ray diffraction. These findings suggest that the decreased emission intensity of PTyr-TPA resulted from release of the restricted intramolecular rotation of the triphenylamine moiety in the polypeptide center.

Synthesis and Application of Aurophilic Poly(Cysteine) and Poly(Cysteine)-Containing Copolymers

The redox capacity, as well as the aurophilicity of the terminal thiol side groups, in poly(Cysteine) lend a unique characteristic to this poly(amino acid) or polypeptide. There are two major application fields for this polymer: (i) biomedical applications in drug delivery and surface modification of biomedical devices and (ii) as coating for electrodes to enhance their electrochemical sensitivity. The intended application determines the synthetic route for p(Cysteine). Polymers to be used in biomedical applications are typically polymerized from the cysteine N-carboxyanhydride by a ring-opening polymerization, where the thiol group needs to be protected during the polymerization. Advances in this methodology have led to conditions under which the polymerization progresses as living polymerization, which allows for a strict control of the molecular architecture, molecular weight and polydispersity and the formation of block copolymers, which eventually could display polyphilic properties. Poly(Cysteine) used as electrode coating is typically polymerized onto the electrode by cyclic voltammetry, which actually produces a continuous, pinhole-free film on the electrode via the formation of covalent bonds between the amino group of Cysteine and the carbon of the electrode. This resulting coating is chemically very different from the well-defined poly(Cysteine) obtained by ring-opening polymerizations. Based on the structure of cysteine a significant degree of cross-linking within the coating deposited by cyclic voltammetry can be assumed. This manuscript provides a detailed discussion of the ring-opening polymerization of cysteine, a brief consideration of the role of glutathione, a key cysteine-containing tripeptide, and examples for the utilization of poly(Cysteine) and poly(Cysteine)-containing copolymers, in both, the biomedical as well as electrochemical realm.

Mussel-Inspired Thermoresponsive Polypeptide-Pluronic Copolymers for Versatile Surgical Adhesives and Hemostasis

Inspired by marine mussel adhesive proteins, polymers with catechol side groups have been extensively explored in industrial and academic research. Here, Pluronic L-31 alcoholate ions were used as the initiator to prepare a series of polypeptide-Pluronic-polypeptide triblock copolymers via ring-opening polymerization of l-DOPA-N-carboxyanhydride (DOPA-NCA), l-arginine-NCA (Arg-NCA), l-cysteine-NCA (Cys-NCA), and ε-N-acryloyl lysine-NCA (Ac-Lys-NCA). These copolymers demonstrated good biodegradability, biocompatibility, and thermoresponsive properties. Adhesion tests using porcine skin and bone as adherends demonstrated lap-shear adhesion strengths up to 106 kPa and tensile adhesion strengths up to 675 kPa. The antibleeding activity and tissue adhesive ability were evaluated using a rat model. These polypeptide-Pluronic copolymer glues showed superior hemostatic properties and superior effects in wound healing and osteotomy gaps. Complete healing of skin incisions and remodeling of osteotomy gaps were observed in all rats after 14 and 60 days, respectively. These copolymers have potential uses as tissue adhesives, antibleeding, and tissue engineering materials.