Postpolymerization Modification of Block Copolymers

Functionalized [2.2]Paracyclophanedienes as Monomers for Poly(p-phenylenevinylene)s

Poly(p-phenylenevinylene)s (PPVs) featuring complex side-chains, to date, have only been synthesized by nonliving polymerization methods which have no control over PPV molecular weights, dispersities, or end groups. [2.2]Paracyclophane-1,9-diene (pCpd) has gained attention as a monomer for its ability to be ring-opened to PPV in a living fashion. pCpd, an organic cyclic scaffold with planar chirality, has seen minimal structural diversity due to the harsh reaction conditions required to afford the highly strained compound. Herein, we introduce a general method to overcome this by targeting the synthesis of a monohydroxy-pCpd via mono-demethylation of a dialkoxy-pCpd. The monohydroxy-pCpd can then be functionalized easily, which we demonstrate using three distinct side-chains with four moieties commonly incorporated in conjugated polymers: an alkyl bromide, an oligo(ethylene glycol) chain, an enantiomerically pure side-chain, and a Boc-protected amine. These monofunctionalized-pCpds were investigated as monomers in the ring-opening metathesis polymerization (ROMP) to afford functionalized PPVs in a living manner. The functional-group-containing PPVs are synthesized with full control over their end groups, repeat units, and dispersities. The feasibility of post-polymerization modifications to incorporate any desired moiety to PPV fabricated by this method was demonstrated using an azide-alkyne click reaction. All synthesized PPVs were soluble in organic solvents and display the same fluorescent emission, indicating their conjugated backbones are unaltered.

A Versatile Step-Growth Polymerization Route to Functional Polyesters from an Activated Diester Monomer

This work describes a versatile and efficient condensation polymerization route to aliphatic polyesters by organo-catalyzed (4-dimethylaminopyridine) transesterification reactions between an activated pentafluorophenyl-diester of adipic acid and structurally different diols. By introducing "monofunctional impurity" or "stoichiometric imbalance," this methodology can afford well-defined end-functionalized polyesters with predictable molecular weights and narrow dispersity under mild conditions without any necessity for the removal of the byproducts to accelerate the polymerization reaction, which remains a major challenge in conventional polyester synthesis with non-activated diesters. Wide substrate scope with structurally different monomers and the synthesis of block copolymers by chain extension following either ring-opening polymerization or controlled radical polymerization have been successfully demonstrated. Some of the polyesters synthesized by this newly introduced approach show high thermal stability, crystallinity, and enzymatic degradation in aqueous environments.

Exhaustive Baeyer-Villiger oxidation: a tailor-made post-polymerization modification to access challenging poly(vinyl acetate) copolymers

The discovery of exhaustive (nearly quantitative) post-polymerization modifications (PPM) relies heavily on the efficiency of their corresponding small-molecule protocols. However, the direct translation of existing small-molecule protocols into PPM methods has never been guaranteed due to the intrinsic differences between small-molecule substrates and polymers. Herein, we introduce the direct optimization on polymers (DOP) as a complementary approach to developing exhaustive PPM reactions. As proof of the DOP concept, we present an exhaustive Baeyer-Villiger (BV) post-modification which cannot be accessed by conventional approaches. This user-friendly methodology provides general access to synthetically challenging copolymers of vinyl acetate and more activated monomers (MAMs) including both statistical and narrow-dispersed block copolymers. Furthermore, a scalable one-pot copolymerization/exhaustive BV post-modification procedure was developed to produce such materials showing improved performance over regular PVAc.

Nanosphere size control by varying the ratio of poly(ester amide) block copolymer blends

HYPOTHESIS

Blending amphiphilic triblock (A-B-A) and diblock (A-B) copolymers comprised of the same hydrophobic tyrosine-derived oligomeric B-block and hydrophilic poly(ethylene glycol) methyl ether (mPEG) A-block can provide highly tunable self-assembled nanosphere particle sizes suitable for biomedical applications.

EXPERIMENT

Triblock and diblock copolymers were synthesized via carbodiimide chemistry and were characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The amount of free PEG present in the purified copolymers was determined using a standard addition calibration curve and GPC peak deconvolution methods. Nanospheres were prepared by co-precipitation of each copolymer and of copolymer blends over a range of mole ratios. Nanospheres were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM) and % polymer recovery post-preparation.

FINDING

Precise synthesis control produced triblock and diblock copolymers with narrow molecular weight distributions and minimal residual reactants. Self-assembled nanosphere particle sizes were 33 nm for the triblock and 129 nm for the diblock, and the size of their blends increased continuously as a function of mole ratio within that biomedically relevant range. Addition of unreacted PEG had minimal impact on either triblock or diblock nanosphere particle sizes whereas addition of unreacted oligomeric B-block increased nanosphere sizes.

Functional pH-responsive polymers containing dynamic enaminone linkages for the release of active organic amines

Dynamic covalent bonds have attracted attention for the development of pH-responsive polymers, however, studies using acid-cleavable enaminone linkages as a means of controlled drug release have been limited. Herein, we...

Modulating the reactivity of polymer with pendant ester groups by methylation reaction for preparing functional polymers

Chemical reaction triggered the reactivity of polymeric esters.

Contrasting the Charge Carrier Mobility of Isotactic, Syndiotactic, and Atactic Poly((N-carbazolylethylthio)propyl methacrylate)

Isotactic nonconjugated pendant electroactive polymers (NCPEPs) have recently shown potential to achieve comparable charge carrier mobilities with conjugated polymers. Here we report the broader influence of tacticity in NCPEPs, using poly((N-carbazolylethylthio)propyl methacrylate) (PCzETPMA) as a model polymer. We utilized the thiol-ene reaction as an efficient postpolymerization functionalization method to achieve pendant polymers with high isotacticity and syndiotacticity. We found that a stereoregular isotactic polymer showed ∼100 times increased hole mobility (μh) as compared to both atactic and low molecular weight syndiotactic PCzETPMA, achieving μh of 2.19 × 10-4 cm2 V-1 s-1 after annealing at 120 °C. High molecular weight syndiotactic PCzETPMA gave ∼10 times higher μh than its atactic counterpart, comparable to isotactic PCzETPMA after annealing at 150 °C. Importantly, high molecular weight syndiotactic PCzETPMA showed a dramatic increase in μh to 1.82 × 10-3 cm2 V-1 s-1 when measured after annealing at 210 °C, which surpassed the well-known conjugated polymer poly(3-hexylthiophene) (P3HT) (μh = 4.51 × 10-4 cm2 V-1 s-1). MD simulations indicated short-range π-π stacked ordering in the case of stereoregular isotactic and syndiotactic polymers. This work is the first report of charge carrier mobilities in syndiotactic NCPEPs and demonstrates that the tacticity, annealing conditions, and molecular weight of NCPEPs can strongly affect μh.

Molecular and Structure-Properties Comparison of an Anionically Synthesized Diblock Copolymer of the PS-b-PI Sequence and Its Hydrogenated or Sulfonated Derivatives

An approach to obtaining various nanostructures utilizing a well-studied polystyrene-b-poly(isoprene) or PS-b-PI diblock copolymer system through chemical modification reactions is reported. The complete hydrogenation and partial sulfonation to the susceptible carbon double bonds of the PI segment led to the preparation of [polystyrene-b-poly(ethylene-alt-propylene)] as well as [polystyrene-b-poly(sulfonated isoprene-co-isoprene)], respectively. The hydrogenation of the polyisoprene block results in enhanced segmental immiscibility, whereas the relative sulfonation induces an amphiphilic character in the final modified material. The successful synthesis of the pristine diblock copolymer through anionic polymerization and the relative chemical modification reactions were verified using several molecular and structural characterization techniques. The thin film structure–properties relationship was investigated using atomic force microscopy under various conditions such as different solvents and annealing temperatures. Small-angle X-ray scattering was employed to identify the different observed nanostructures and their evolution upon thermal annealing.

Secondary Structure in Nonpeptidic Supramolecular Block Copolymers

Proteins contain a level of complexity-secondary and tertiary structures-that polymer chemists aim to imitate. The bottom-up synthesis of protein-mimicking polymers mastering sequence variability and dispersity remains challenging. Incorporating polymers with predefined secondary structures, such as helices and π-π stacking sheets, into block copolymers circumvents the issue of designing and predicting one facet of their 3D architecture. Block copolymers with well-defined secondary-structure elements formed by covalent chain extension or supramolecular self-assembly may be considered for localized tertiary structures.In this Account, we describe a strategy toward block copolymers composed of units bearing well-defined secondary structures mixed in a "plug-and-play" manner that approaches a modicum of the versatility seen in nature. Our early efforts focused on the concept of single-chain collapse to achieve folded secondary structures through either hydrogen bonding or quadrupole attractive forces. These cases, however, required high dilution. Therefore, we turned to the ring-opening metathesis polymerization (ROMP) of [2.2]paracyclophane-1,9-dienes (pCpd), which forms conjugated, fluorescent poly(p-phenylenevinylene)s (PPVs) evocative of β-sheets. Helical building blocks arise from polymers such as poly(isocyanide)s (PICs) or poly(methacrylamide)s (PMAcs) containing bulky, chiral side groups while the coil motif can be represented by any flexible chain; we frequently chose poly(styrene) (PS) or poly(norbornene) (PNB). We installed moieties for supramolecular assembly at the chain ends of our "sheets" to combine them with complementary helical or coil-shaped polymeric building blocks.Assembling hierarchical materials tantamount to the complexity of proteins requires directional interactions with high specificity, covalent chain extension, or a combination of both chemistries. Our design is based on functionalized reversible addition-fragmentation chain-transfer (RAFT) agents that allowed for the introduction of recognition motifs at the terminus of building blocks and chain-terminating agents (CTAs) that enabled the macroinitiation of helical polymers from the chain end of ROMP-generated sheets and/or coils. To achieve triblock copolymers with a heterotelechelic helix, we relied on supramolecular assembly with helix and coil-shaped building blocks. Our most diverse structures to date comprised a middle block of PPV sheets, parallel or antiparallel, and supramolecularly or covalently linked, respectively, end-functionalized with molecular recognition units (MRUs) for orthogonal supramolecular assembly. We explored PPV sheets with multiple folds achieved by chain extension using alternating pCpd and phenyl-pentafluorophenyl β-hairpin turns. Using single-molecule polarization spectroscopy, we showed that folding occurs preferentially in multistranded over double-stranded PPV sheets. Our strategy toward protein-mimicking and foldable polymers demonstrates an efficient route toward higher ordered, well-characterized materials by taking advantage of polymers that naturally manifest secondary structures. Our studies demonstrate the retention of distinct architectures after complex assembly, a paradigm that we believe may extend to other polymeric folding systems.

Core-functionalized nanoaggregates: preparation via polymerization-induced self-assembly and their applications

Core-functionalized nanoaggregates can be prepared by a combination of polymerization-induced self-assembly (PISA) and post-polymerization modification.

Synthesis of Polymers Containing Potassium Acyltrifluoroborates (KATs) and Post-polymerization Ligation and Conjugation

We report the synthesis of monomers for atom-transfer radical polymerization (ATRP) and a reversible addition-fragmentation chain transfer (RAFT) agent bearing trifluoroborate iminiums (TIMs), which are quantitatively converted into potassium acyltrifluoroborates (KATs) after polymerization. The resulting KAT-containing polymers are suitable for rapid amide-forming ligations for both post-polymerization modification and polymer conjugation. The polymer conjugation occurs rapidly, even under dilute (micromolar) aqueous conditions at ambient temperatures, thereby enabling the synthesis of a variety of linear and star-shaped block copolymers. In addition, we applied post-polymerization modification to the covalent linking of a photocaged cyclic antibiotic (gramicidin S) to the side chains of the KAT-containing copolymer. Cellular assays revealed that the polymer-antibiotic conjugate is biocompatible and provides efficient light-controlled release of the antibiotic on demand.

Post-Polymerization Modification of Ring Opening Metathesis Polymerization (ROMP)-Derived Materials Using Wittig Reactions

This communication describes our recent efforts to utilize Wittig olefination reactions for the post-polymerization modification of polynorbornene derivatives prepared through ring opening metathesis polymerization (ROMP). Polymerizing α-bromo ester-containing norbornenes provides polymers that can undergo facile substitution with triphenylphosphine. The resulting polymeric phosphonium salt is then deprotonated to form an ylide that undergoes reaction with various aryl aldehydes in a one-pot fashion to yield the respective cinnamates. These materials can undergo further modification through photo-induced [2 + 2] cycloaddition cross-linking reactions.

Amide transformation as an efficient postpolymerization modification approach for the synthesis of functional polyacetylenes

Modification of a precursor polyacetylene with various amines and alcohols through amide transformation gives access to a series of functional polymers showing nonlinear optical, luminescence, enhanced surface energy, and redox active properties.

Dual stimuli-responsive polypeptide prepared by thiol-ene click reaction of poly(l-cysteine) and N, N-dimethylaminoethyl acrylate

Stimuli-responsive polymers that can undergo conformational changes with external triggers have enabled themselves as smart materials for various utilizations, among which biodegradability is of particular importance to be engineered for biomedical application. In this study, a thermo and pH dual responsive polypeptide (N, N-dimethylaminoethyl acrylate-modified poly(l-cysteine)) (PLC-g-DMAEA) was prepared by the combination of N-carboxyanhydride ring-open polymerization and thiol-ene click chemistry. The biodegradable poly(l-cysteine) (PLC) with pendant thiol groups provided an easily clickable backbone for postmodification, which was demonstrated by reacting with a well-known monomer of N, N-dimethylaminoethyl acrylate (DMAEA) to achieve both temperature and pH responsiveness. The irreversible thermo-response of PLC-g-DMAEA could be attributed to the ordered β-sheets formed upon heating, leading to the trapped side groups with poor water accessibility. Moreover, this copolymer precipitated at pH ranging from 7.5 to 9.7, but protonation of tertiary amine groups (pH < 7.5) and salt forming of masked thiol groups (pH > 9.7) rendered it soluble in water. Our results revealed that a ready available vinyl monomer could be easily clicked onto the biodegradable PLC and its stimuli responsiveness would be reserved. Moreover, the primary and secondary structures of PLC might influence the conformation, thus leading to the unique responsive behavior of the resulted copolymer.

Postpolymerization modification based on dynamic imine chemistry for the synthesis of functional polyacetylenes

This study established a postpolymerization modification method for the preparation of functional polyacetylenes based on dynamic imine chemistry.

Synthesis of multifunctional homopolymers via sequential post-polymerization reactions

This mini-review highlights recent developments in the synthesis of multifunctional homopolymers, i.e., homopolymers with multiple pendent functionalities.

Computational Study of the Molecular Structure and Hydrogen Bonding in the Hamilton Wedge/Cyanuric Acid Binding Motif

Intermolecular binding between a Hamilton wedge and cyanuric acid, a frequently employed binding motif to achieve self-assembly of single-chain polymer nanoparticles, is studied by means of ab initio quantum-chemical and DFT calculations. A conformational analysis of the isolated compounds and the hydrogen-bonded complex reveals several low-energy structures, which are characterized based on their nonplanarity and binding energy. New hypothetical binding motifs are proposed and proven to possess a superior binding energy, upon becoming planar. Comparison to experimentally measured NMR spectroscopy data is made and cases of disagreement are traced back to solvent effects for isolated substituents or to thermally stretched intermolecular bonds for hydrogen-bonded species. Strong linear correlations between NMR chemical shifts and hydrogen-bond lengths are established for all compounds investigated.

Poly(acryloyl hydrazide), a versatile scaffold for the preparation of functional polymers: synthesis and post-polymerisation modification

Here we present the synthesis of poly(acryloyl hydrazide), a versatile scaffold for the preparation of functional polymers, and its post-polymerisation modification using a wide range of conditions.

Here we present the synthesis and post-polymerisation modification of poly(acryloyl hydrazide), a versatile scaffold for the preparation of functional polymers: poly(acryloyl hydrazide) was prepared from commercially available starting materials in a three step synthesis on a large scale, in good yields and high purity. Our synthetic approach included the synthesis of a Boc-protected acryloyl hydrazide, the preparation of polymers via RAFT polymerisation and the deprotection of the corresponding Boc-protected poly(acryloyl hydrazide). Post-polymerisation modification of poly(acryloyl hydrazide) was then demonstrated using a range of conditions for both hydrophilic and hydrophobic aldehydes. These experiments demonstrate the potential of poly(acryloyl hydrazide) as a scaffold in the synthesis of functional polymers, in particular those applications where in situ screening of the activity of the functionalised polymers may be required (e.g. biological applications).

SuFEx-Based Polysulfonate Formation from Ethenesulfonyl Fluoride-Amine Adducts

The SuFEx-based polycondensation between bisalkylsulfonyl fluorides (AA monomers) and bisphenol bis(t-butyldimethylsilyl) ethers (BB monomers) using [Ph₃ P=N-PPh₃ ]⁺ [HF₂ ]^- as the catalyst is described. The AA monomers were prepared via the highly reliable Michael addition of ethenesulfonyl fluoride and amines/anilines while the BB monomers were obtained from silylation of bisphenols by t-butyldimethylsilyl chloride. With these reactions, a remarkable diversity of monomeric building blocks was achieved by exploiting readily available amines, anilines, and bisphenols as starting materials. The SuFEx-based polysulfonate formation reaction exhibited excellent efficiency and functional group tolerance, producing polysulfonates with a variety of side chain functionalities in >99 % conversion within 10 min to 1 h. When bearing an orthogonal group on the side chain, the polysulfonates can be further functionalized via click-chemistry-based post-polymerization modification.

Manipulation of cell adhesion and dynamics using RGD functionalized polymers

An ABA tri-block co-polymer with RGD peptide sequences inserted were synthesized. Cell adhesion can be controlled by polymer configuration changing via electrical field.

Expanding the Cationic Polycarbonate Platform: Attachment of Sulfonium Moieties by Postpolymerization Ring Opening of Epoxides

Postpolymerization modification is a critical strategy for the development of functional polycarbonate scaffolds for medicinal applications. To expand the scope of available postpolymerization functionalization methods, polycarbonates containing pendant thioether groups were synthesized by organocatalyzed ring-opening polymerization. The thioether group allowed for the postpolymerization ring-opening of functional epoxides, affording a wide variety of sulfonium-functionalized A-B diblock and A-B-A triblock polycarbonate copolymers. The pendant thioether groups were found to be compatible with previously developed postsynthesis functionalization methods allowing for selective and orthogonal modifications of the polycarbonates.

Biosynthetic Polymers as Functional Materials

The synthesis of functional polymers encoded with biomolecules has been an extensive area of research for decades. As such, a diverse toolbox of polymerization techniques and bioconjugation methods has been developed. The greatest impact of this work has been in biomedicine and biotechnology, where fully synthetic and naturally derived biomolecules are used cooperatively. Despite significant improvements in biocompatible and functionally diverse polymers, our success in the field is constrained by recognized limitations in polymer architecture control, structural dynamics, and biostabilization. This Perspective discusses the current status of functional biosynthetic polymers and highlights innovative strategies reported within the past five years that have made great strides in overcoming the aforementioned barriers.

Thermal and Spectral Analysis of Novel Amide-Tethered Polymers from Poly(allylamine)

Post-polymerization modification of poly(allylamine hydrochloride) was applied to synthesize a library of amide-linked polyelectrolytes with tethered aliphatic, aromatic, and cubyl moieties. The efficacy of amidation was determined to be between 12 and 98 %, depending on the electronics, sterics, and solubility of the amide linkage. 13C solid-state NMR was used to further validate their structure. Thermogravimetric analysis and differential scanning calorimetry analysis indicated that none of the new polymers displayed a classic melt/freeze profile, but all displayed onset decomposition temperatures smaller than 215°C. We anticipate that the structure–property relationships observed in the resulting library of graft-modified polymers can facilitate better understanding of how to design polyelectrolytes for the construction of well-defined multilayer systems.