Phosphonium-Based Ionic Liquids as a New Class of Radical Initiators and Their Use in Gas-Free Frontal Polymerization

Development of radical initiator based on o-imino-isourea capable of photo/thermal polymerization

Using o-imino isourea, three photo- and thermal dual-responsive radical initiators dicyheDCC, CyheDCC, and BnDCC were systematically developed and synthesized. By adding an aromatic ring to the free radical initiators, the ultraviolet-visible absorption was redshifted, and the absorption coefficient was increased. Compared with other initiators, BnphDCC exhibited an exceptional photoinitiation rate under photo-differential scanning calorimetry (DSC) and a high absorption coefficient (ε = 15 420 M-1 cm-1). Therefore, it is an appropriate potential photoinitiator. DicyheDCC, which was composed of a cyclic hydrocarbon, exhibited rapid thermal initiation (Tpeak = 82 °C) during thermal DSC, making it a valuable thermal radical initiator. Because of the low stiffness of the N-O link in radical initiators, density functional theory predicts that the aliphatic ring has a significantly lower enthalpy than the aromatic ring. Moreover, in this study, CyhephDCC and BnphDCC, as dual-responsive radical initiators, indicated the potential for a photo- and heat dual-curing system through the universal free-radical polymerization of acrylates. These significant discoveries may be useful for developing efficient and diversified polymer network systems that require synergistic photo- and thermal effects.

Polymer Hydrogels and Frontal Polymerization: A Winning Coupling

Polymer hydrogels are 3D networks consisting of hydrophilic crosslinked macromolecular chains, allowing them to swell and retain water. Since their invention in the 1960s, they have become an outstanding pillar in the design, development, and application of engineered polymer systems suitable for biomedical and pharmaceutical applications (such as drug or cell delivery, the regeneration of hard and soft tissues, wound healing, and bleeding prevention, among others). Despite several well-established synthetic routes for developing polymer hydrogels based on batch polymerization techniques, about fifteen years ago, researchers started to look for alternative methods involving simpler reaction paths, shorter reaction times, and lower energy consumption. In this context, frontal polymerization (FP) has undoubtedly become an alternative and efficient reaction model that allows for the conversion of monomers into polymers via a localized and propagating reaction-by means of exploiting the formation and propagation of a "hot" polymerization front-able to self-sustain and propagate throughout the monomeric mixture. Therefore, the present work aims to summarize the main research outcomes achieved during the last few years concerning the design, preparation, and application of FP-derived polymeric hydrogels, demonstrating the feasibility of this technique for the obtainment of functional 3D networks and providing the reader with some perspectives for the forthcoming years.

Frontal Polymerizations: From Chemical Perspectives to Macroscopic Properties and Applications

The synthesis and processing of most thermoplastics and thermoset polymeric materials rely on energy-inefficient and environmentally burdensome manufacturing methods. Frontal polymerization is an attractive, scalable alternative due to its exploitation of polymerization heat that is generally wasted and unutilized. The only external energy needed for frontal polymerization is an initial thermal (or photo) stimulus that locally ignites the reaction. The subsequent reaction exothermicity provides local heating; the transport of this thermal energy to neighboring monomers in either a liquid or gel-like state results in a self-perpetuating reaction zone that provides fully cured thermosets and thermoplastics. Propagation of this polymerization front continues through the unreacted monomer media until either all reactants are consumed or sufficient heat loss stalls further reaction. Several different polymerization mechanisms support frontal processes, including free-radical, cat- or anionic, amine-cure epoxides, and ring-opening metathesis polymerization. The choice of monomer, initiator/catalyst, and additives dictates how fast the polymer front traverses the reactant medium, as well as the maximum temperature achievable. Numerous applications of frontally generated materials exist, ranging from porous substrate reinforcement to fabrication of patterned composites. In this review, we examine in detail the physical and chemical phenomena that govern frontal polymerization, as well as outline the existing applications.

Influence of the alkyl chain length on the physicochemical properties and microbial biocompatibility of phosphonium based fatty acid ionic liquids

Ionic liquids (ILs) have remarkable properties and applications in many areas of science. Phosphonium ILs have become important because of their unique chemical and thermal stabilities. The present work is focused on the synthesis, characterisation, physicochemical properties, and microbial toxicity assessment of phosphonium ILs bearing seven different fatty acid anions. The structures of the synthesised ILs were confirmed by 1H and 13C nuclear magnetic resonance (NMR) and FTIR spectroscopy. Physicochemical properties such as density and viscosity of pure ILs were measured at temperatures ranging from 298.15 to 313.15 K. The experimental density decreased, whereas the viscosity increased with an increasing number of carbon atoms in the anion. The derived properties were also found to be anion dependent. The thermal decomposition temperature was investigated by TGA. Subsequently, the toxicity profile of the ILs was determined for selected Gram positive and Gram negative bacteria and some species of fungi in terms of minimum inhibitory concentrations (MIC). The results show that the antimicrobial activities of the ILs are strongly related to the structures of the ILs, where an increase in toxicity was observed with increasing alkyl group chain length of the fatty acid anion.

Photoinitiating systems and kinetics of frontal photopolymerization processes – the prospects for efficient preparation of composites and thick 3D structures

The frontal photopolymerisation combining a versatile interest in many applications and economic efficiency is destined to occupy a growing polymer economy.

Carbon and carbon composites obtained using deep eutectic solvents and aqueous dilutions thereof

Extending the “all-in-one” features of DESs to DES/H₂O binary mixtures.

Synthesis and Characterization of Clay Polymer Nanocomposites of P(4VP-co-AAm) and Their Application for the Removal of Atrazine

Atrazine (ATZ) is an herbicide which is applied to the soil, and its mechanism of action involves the inhibition of photosynthesis. One of its main functions is to control the appearance of weeds in crops, primarily in corn, sorghum, sugar cane, and wheat; however, it is very toxic for numerous species, including humans. Therefore, this work deals with the adsorption of ATZ from aqueous solutions using nanocomposite materials, synthesized with two different types of organo-modified clays. Those were obtained by the free radical polymerization of 4-vinylpyridine (4VP) and acrylamide (AAm) in different stoichiometric ratios, using tetrabutylphosphonium persulfate (TBPPS) as a radical initiator and N,N′-methylenebisacrylamide (BIS) as cross-linking agent. The structural, morphological, and textural characteristics of clays, copolymers, and nanocomposites were determined through different analytical and instrumental techniques, i.e., X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Adsorption kinetics experiments of ATZ were determined with the modified and synthesized materials, and the effect of the ratio between 4VP and AAm moieties on the removal capacities of the obtained nanocomposites was evaluated. Finally, from these sets of experiments, it was demonstrated that the synthesized nanocomposites with higher molar fractions of 4VP obtained the highest removal percentages of ATZ.

Synthesis and characterization of functionally gradient materials obtained by frontal polymerization

Functionally gradient materials (FGMs) with gradual and continuous changes of their properties in one or more dimensions are useful in a wide range of applications. However, obtaining such materials with accurate control of the gradient, especially when the gradient is nonlinear, is not easy. In this work, frontal polymerization (FP) was exploited to synthesize polymeric FGMs. We demonstrated that the use of ascending FP with continuous feeding of monomers with computer-controlled peristaltic pumps provided an excellent method for the preparation of functionally gradient materials with programmed gradients. To test the effectiveness of the method, copolymers made from triethylene glycol dimethacrylate/hexyl methacrylate with linear and hyperbolic gradient in composition were synthesized. Differential scanning calorimetry (DSC), Shore A hardness measurements, compression tests, and swelling studies were performed along the length of the materials to assess the relationship between the gradients and the material properties. Glass transition temperatures, determined by DSC, showed a linear dependence on the composition and were in agreement with theoretical values. The other properties showed different and specific behaviors as a function of the compositional gradient.

Monodisperse polymeric ionic liquid microgel beads with multiple chemically switchable functionalities

We present simple, inexpensive microfluidics-based fabrication of highly monodisperse poly(ionic liquid) microgel beads with a multitude of functionalities that can be chemically switched in facile fashion by anion exchange and further enhanced by molecular inclusion. Specifically, we show how the exquisite control over bead size and shape enables extremely precise, quantitative measurements of anion- and solvent-induced volume transitions in these materials, a crucial feature driving several important applications. Next, by exchanging diverse anions into the synthesized microgel beads, we demonstrate stimuli responsiveness and a multitude of novel functionalities including redox response, controlled release of chemical payloads, magnetization, toxic metal removal from water, and robust, reversible pH sensing. These chemically switchable stimulus-responsive beads are envisioned to open up a vast array of potential applications in portable and preparative chemical analysis, separations and spatially addressed sensing.

Recent developments in the utilization of green solvents in polymer chemistry

The use of solvents produces the largest amount of auxiliary waste in polymer science. Due to the fact that sustainable chemistry is becoming more and more important in polymer research, alternative reaction media have been investigated in order to reduce or replace the use of organic solvents. The most commonly used green solvents in polymer chemistry are water, supercritical carbon dioxide and ionic liquids. The progress of utilizing these green solvents in polymerization processes is reviewed and discussed in this critical review on the basis of results mainly published during the last five years (216 references).