Smart “All Acrylate” ABA Triblock Copolymer Bearing Reactive Functionality via Atom Transfer Radical Polymerization (ATRP): Demonstration of a “Click Reaction” in Thermoreversible Property

Supramolecular Polymer Network based on Electrophilic Substitution (ES) Adduct of Furan-Triazolinedione

Polymers with furan functionality have been the subject of extensive research on developing sustainable materials applying a limited number of dynamic covalent approaches. Herein, we introduce a facile, dynamic non-covalent approach to make a furan polymer readily accessible for self-healing applications based on its electrophilic substitution (ES) with a commercially available 1,2,4-triazoline-3,5-dione (TAD) derivative, 4-phenyl-TAD (PTAD). A tailor-made furan polymer, poly(furfuryl methacrylate) (PFMA), considering it an initial illustrative example, was rapidly ES modified with PTAD to produce furfuryl-tagged triazolidine that subsequently associated via inter-molecular hydrogen (H-) bonding to produce a thermally reversible supramolecular polymer network under ambient conditions. The H-bonded network was experimentally quantified via ATR-IR analysis and theoretically rationalized via the density functional theory (DFT) study using smaller organic model compounds analogous to the macromolecular system. Thermoreversible feature of the H-bonded triazolidine-derived supramolecular polymer network enabled the solution reprocessing and self-healing of the polymer material.

Synthesis of homo- and copolymer containing sulfonic acid via atom transfer radical polymerization

Well-defined functional poly(p-phenyl styrenesulfonate) and poly(p-phenyl styrene-sulfonate-co-styrene) were successfully synthesized by the atom transfer radical polymerization (ATRP) using CuBr/bpy(PMDETA) catalyst and 1-phenylethyl bromide (1-PEBr) as an ATRP initiator in diphenyl ether (DPE) or dimethyl formamide (DMF). In both homo- and copolymers, the CuBr/PMDETA catalytic system in DPE or DME showed higher yield than CuBr/bpy and the polydispersity index (PDI) of polymer was low. Using PMDETA or bpy as a ligand in DMF, the high yield with high PDI was obtained than in DPE. We found that the CuBr/PMDETA catalyzed ATRP of p-phenyl styrenesulfonate and copolymerization with styrene comonomer in DPE proceeded in a controlled manner. The polymers containing sulfonic acid were obtained by the chemical deprotection of protecting group, followed by acidification. The molecular structure, molecular weights and thermal properties of the copolymers were determined by nuclear magnetic resonance (¹H NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, size exclusion chromatography (SEC), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively.

Toward Green Atom Transfer Radical Polymerization: Current Status and Future Challenges

Reversible-deactivation radical polymerizations (RDRPs) have revolutionized synthetic polymer chemistry. Nowadays, RDRPs facilitate design and preparation of materials with controlled architecture, composition, and functionality. Atom transfer radical polymerization (ATRP) has evolved beyond traditional polymer field, enabling synthesis of organic-inorganic hybrids, bioconjugates, advanced polymers for electronics, energy, and environmentally relevant polymeric materials for broad applications in various fields. This review focuses on the relation between ATRP technology and the 12 principles of green chemistry, which are paramount guidelines in sustainable research and implementation. The green features of ATRP are presented, discussing the environmental and/or health issues and the challenges that remain to be overcome. Key discoveries and recent developments in green ATRP are highlighted, while providing a perspective for future opportunities in this area.

Self-Healing Silsesquioxane-Based Materials

This review is devoted to self-healing materials (SHM) containing polyhedral oligomeric silsesquioxanes (POSS) as building blocks. The synthetic approach can vary depending on the role POSS are expected to play in a given system. POSS (especially double-decker silsesquioxanes) can be grafted in side chains of a polymer backbone or used as segments of the main chain. Appropriate functionalization allows the formation of dynamic bonds with POSS molecules and makes them an active component of SHM, both as crosslinking agents and as factors that enhance the dynamics of macromolecules in the polymer matrix. The latter effect can be achieved by reversible release of bulky POSS cages or by the formation of separated inclusions in the polymer matrix through hydrophobic interactions and POSS aggregation. The unique properties of POSS-based self-healing systems make them interesting and versatile materials for various applications (e.g., repairable coatings, sealants, sensors, soft materials for tissue engineering, drug delivery, and wound healing).

Catalytic Ring-Opening Copolymerization of Fatty Acid Epoxides: Access to Functional Biopolyesters

Fatty acid epoxies serve as valuable starting materials for the development of bio-based polyesters. Here we present a new and efficient catalytic process that allows for the copolymerization of fatty acid-based epoxides and various cyclic anhydrides under attractive process conditions affording functional polyesters. The degree of functionalization and the nature of the polymer backbone can be modulated via monomer design. Postpolymerization cross-linking processes were examined to create rigid macromolecular networks that build on orthogonal polyester functionality, creating possible entries for materials with switchable thermal and mechanical properties.

Macromolecularly Engineered Thermoreversible Heterogeneous Self-Healable Networks Encapsulating Reactive Multidentate Block Copolymer-Stabilized Carbon Nanotubes

The development of heterogeneous covalent adaptable networks (CANs) embedded with carbon nanotubes (CNTs) that undergo reversible dissociation/recombination through thermoreversibility has been significantly explored. However, the carbon nanotube (CNT)-incorporation methods based on physical mixing and chemical modification could result in either phase separation due to structural incompatibility or degrading conjugation due to a disruption of π-network, thus lowering their intrinsic charge transport properties. To address this issue, the versatility of a macromolecular engineering approach through thermoreversibility by physical modification of CNT surfaces with reactive multidentate block copolymers (rMDBCs) is demonstrated. The formed CNTs stabilized with rMDBCs (termed rMDBC/CNT colloids) bearing reactive furfuryl groups is functioned as a multicrosslinker that reacts with a polymaleimide to fabricate robust heterogeneous polyurethane (PU) networks crosslinked through dynamic Diels-Alder (DA)/retro-DA chemistry. Promisingly, the fabricated PU network gels in which CNTs through rMDBC covalently embedded are flexible and robust to be bendable as well as exhibit self-healing elasticity and enhanced conductivity.

Self-healing hydrophobic POSS-functionalized fluorinated copolymers via RAFT polymerization and dynamic Diels–Alder reaction

Development of self-healing hydrophobic POSS-functionalized fluorinated copolymethacrylate(s) via RAFT Polymerization and dynamic Diels–Alder Reaction.

Self-healable functional polymers based on Diels–Alder ‘click chemistry’ involving substituted furan and triazolinedione derivatives: a simple and very fast approach

The synthesis of a functional healable polymethacrylate based on dynamic 2,5-disubstituted furan–TAD via DA-“click” conjugation is reported.

Self-healing elastomers based on conjugated diolefins: a review

The introduction of dynamic covalent and physical crosslinks into diolefin-based elastomers improves mechanical and self-healing properties. The presence of dynamic crosslinks also helps in the reprocessing of elastomers.

Hydrophobic Shape-Memory Biocomposites from Tung-Oil-Based Bioresin and Onion-Skin-Derived Nanocellulose Networks

The fabrication of smart biocomposites from sustainable resources that could replace today’s petroleum-derived polymer materials is a growing field of research. Here, we report preparation of novel biocomposites using nanocellulose networks extracted from food residue (onion skin) and a vegetable oil-based bioresin. The resin was synthesized via the Diels-Alder reaction between furfuryl methacrylate and tung oil at various ratios of the components. The onion-skin-extracted cellulose nanofiber and cellulose nanocrystal networks were then impregnated with the resins yielding biocomposites that exhibited improved mechanical strength and higher storage modulus values. The properties of the resins, as well as biocomposites, were affected by the resin compositions. A 190–240-fold increase in mechanical strength was observed in the cellulose nanofiber (CNF) and cellulose nanocrystal (CNC)-reinforced biocomposites with low furfuryl methacrylate content. The biocomposites exhibited interesting shape-memory behavior with 80–96% shape recovery being observed after 7 creep cycles.

Three-Dimensional Self-Healable Touch Sensing Artificial Skin Device

Human skin is a unique functional material that perfectly covers body parts having various complicated shapes, spontaneously heals mechanical damage, and senses a touch. E-skin devices have been actively researched, focusing on the sensing functionality of skin. However, most e-skin devices still have limitations in their shapes, and it is a challenging issue of interest to realize multiple functionalities in one device as human skin does. Here, new artificial skin devices are demonstrated in application-oriented three-dimensional (3D) shapes, which can sense exact touch location and heal mechanical damage spontaneously. Beyond the conventional film-type e-skin devices, the artificial skin devices are fabricated in optimal three-dimensional structures, via systematic material design and characterization of ion-conductive self-healing hydrogel system and its extrusion-based 3D printing. The ring-shaped and fingertip-shaped artificial skin devices are successfully fabricated to fit perfectly on finger models, and shows large electronic signal contrast, ∼5.4 times increase in current, upon a human finger contact. Furthermore, like human skin, the device provides the exact positional information of an arbitrary touch location on a three-dimensional artificial skin device without complicated device fabrication or data processing.

Synthesis and Properties of Thermosets from Tung Oil and Furfuryl Methacrylate

This work focuses on the development of cross-linked polymer from a highly unsaturated vegetable oil, tung oil (TO) and a bio-based acrylate, furfuryl methacrylate (FMA). The presence of a high degree of unsaturated carbon-carbon bonding in TO makes it a suitable precursor for polymer synthesis. Using this advantage of TO, in this work, we have synthesised a cross-linked polymer from TO and FMA through free radical polymerisation followed by Diels–Alder (DA) reaction. Successful incorporation of both of the raw materials and the two chemical reactions was shown using Fourier-transform infrared (FTIR) and Raman spectroscopy. The development of cross-linked structure was analysed through thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA).

Functionalization of triblock copolymer elastomers by cross-linking the end blocks via trans-N-alkylation-based exchangeable bonds

Functionalization of ABA triblock copolymer-based materials is achieved by incorporating dynamic covalent bonded cross-links via trans-N-alkylation in glassy A block domains.

Polyacrylates Derived from Biobased Ethyl Lactate Solvent via SET-LRP

The precise synthesis of polymers derived from alkyl lactate ester acrylates is reported for the first time. Kinetic experiments were conducted to demonstrate that Cu(0) wire-catalyzed single electron transfer-living radical polymerization (SET-LRP) in alcohols at 25 °C provides a green methodology for the LRP of this forgotten class of biobased monomers. The acrylic derivative of ethyl lactate (EL) solvent and homologous structures with methyl and n-butyl ester were polymerized with excellent control over molecular weight, molecular weight distribution, and chain-end functionality. Kinetics plots in conventional alcohols such as ethanol and methanol were first order in the monomer, with molecular weight increasing linearly with conversion. However, aqueous EL mixtures were found to be more suitable than pure EL to mediate the SET-LRP process. The near-quantitative monomer conversion and high bromine chain-end functionality, demonstrated by matrix-assisted laser desorption ionization time-of-flight analysis, further allowed the preparation of innovative biobased block copolymers containing rubbery poly(ethyl lactate acrylate) poly(ELA) sequences. For instance, the poly(ELA)- b-poly(glycerol acrylate) block copolymer self-assembled in water to form stable micelles with chiral lactic acid-derived block-forming micellar core as confirmed by the pyrene-probe-based fluorescence technique. Dynamic light scattering and transmission electron microscopy measurements revealed the nanosize spherical morphology for these biobased aggregates.

The effect of electron density in furan pendant group on thermal-reversible Diels-Alder reaction based self-healing properties of polymethacrylate derivatives

Herein, we discuss the effect of electron density in a furan pendant group on the thermally reversible Diels–Alder (DA) reaction based self-healing efficiency in polymethacrylate derivatives. First, the furan-functionalized polymethacrylates (rPFMA and dPFMA) having different electron density in the furan pendant groups were prepared through free-radical polymerization. The healing efficiency of rPFMA, which was expected to have high healing efficiency due to the high reactivity of DA reaction originating from the electron density in the furan moiety, was shown to be 95.89% in the first and 69.86% in the second healing process, respectively, where it is higher than that of dPFMA having relatively low electron density in the furan moiety. To illustrate these results, kinetic tests of the DA reaction for rPFMA64 and dPFMA64 were performed, where the reactivity of the DA reaction for rPFMA64 was much higher than that for dPFMA64. This could be explained by the electron density in the furan pendant groups which controls the reactivity of DA reaction having a major effect on the efficiency of self-healing performance in furan-functionalized polymethacrylates.

Herein, we discuss the effect of electron density in a furan pendant group on the thermally reversible Diels–Alder (DA) reaction based self-healing efficiency in polymethacrylate derivatives.

Preparation and properties of self-healing polyether amines based on Diels–Alder reversible covalent bonds

Over time, automotive coating is bound to be damaged; therefore, it is necessary to give the coating a self-healing ability to make its performance even better. First, furfuryl glycidyl ether (FGE) was synthesized by epichlorohydrin and furfuryl alcohol. Then, furanyl-terminated resin FGE-T5000 was synthesized by polyether amine T5000 and FGE. Finally, 4,4′-diphenylmethane bismaleimide (BDM) was added to FGE-T5000 as a cross-linking agent to form a resin named FGE-T5000-BDM which has Diels–Alder (DA) bonds. The products were characterized by Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance, differential scanning calorimeter, dynamic mechanical analysis, thermogravimetric analysis, optical microscope, tensile tests, and other tests. The results showed that FGE-T5000-BDM demonstrated thermally reversible self-healing property from 50°C to 150°C, and that the best temperature of the DA reaction was 80°C. The gel content of FGE-T5000-BDM was 98%. Also, the glass transition temperature and the initial temperature of the Retro-DA (r-DA) reaction were −58°C and 88°C, respectively. Moreover, the self-healing efficiency of FGE-T5000-BDM was up to 88% after staying at 80°C for 12 h. The innovation shown in this article was that the reversible covalent bonds (DA) were combined with the polyether amines, which produced the characteristics of self-healing. Its unique self-healing properties are useful in some areas, such as automobile coatings and other materials.

Thermo-reversible self-healing in a fluorous crosslinked copolymer

Self-healing in a fluorous copolymer material enhances its safety index and extends its working lifetime.

A new class of dual responsive self-healable hydrogels based on a core crosslinked ionic block copolymer micelle prepared via RAFT polymerization and Diels-Alder "click" chemistry

Amphiphilic diblock copolymers of poly(furfuryl methacrylate) (PFMA) with cationic poly(2-(methacryloyloxy)ethyltrimethyl ammonium chloride) (PFMA-b-PMTAC) and anionic poly(sodium 4-vinylbenzenesulfonate) (PFMA-b-PSS) were prepared via reversible addition fragmentation chain-transfer (RAFT) polymerization by using PFMA as a macro-RAFT agent. The formation of the block copolymer was confirmed by FTIR and ¹H NMR analyses. In water, the amphiphilic diblock copolymers, (PFMA-b-PMTAC) and (PFMA-b-PSS), formed micelles with PFMA in the core and the rest of the hydrophilic polymers like PMTAC and PSS in the corona. The PFMA core was crosslinked by using Diels-Alder (DA) "Click" chemistry in water at 60 °C where bismaleimide acted as a crosslinker. Afterwards, both the core crosslinked micelles were mixed at an almost equal charge ratio which was determined by zeta potential analysis to prepare the self-assembled hydrogel. The de-crosslinking of the hydrophobic PFMA core in the self-assembled hydrogel via rDA reaction took place at 165 °C as determined from DSC analysis. This hydrogel showed self-healing behavior using ionic interaction (in the presence of water) and DA chemistry (in the presence of heat).

Self-Healable and Reprocessable Polysulfide Sealants Prepared from Liquid Polysulfide Oligomer and Epoxy Resin

Polysulfide sealants have been commercially applied in many industrial fields. In this article, we study the self-healing property of the epoxy resin-cured polysulfide sealants for the first time. The obtained sealants showed a flexible range of ultimate elongation of 157-478% and a tensile strength of 1.02-0.75 MPa corresponding to different polysulfide oligomers. By taking advantage of the dynamic reversible exchange of disulfide bonds, polysulfide sealants exhibited good self-healing ability under a moderate thermal stimulus. A higher molecular weight and a lower degree of cross-linking of polysulfide oligomer were helpful in improving the ultimate elongation and healing efficiency of the polysulfide sealants. After subjecting to a temperature of 75 °C for 60 min, both the tensile strength and ultimate elongation of a fully cut sample, LP55-F, were restored to 91% of the original values, without affecting the sealing property. Furthermore, the sample exhibited excellent reshaping and reprocessing abilities. These outcomes offer a paradigm toward sustainable industrial applications of the polysulfide-based sealants.

Exploring structural effects in single-chain “folding” mediated by intramolecular thermal Diels–Alder chemistry

We describe a method to fold single polymer chains into nanoparticles using simple thermal Diels–Alder (DA) chemistry.

Interplay between crystallization and the Diels–Alder reaction in biobased multiblock copolyesters possessing dynamic covalent bonds

Biobased multiblock copolyesters possessing physical cross-links via crystallization and chemical cross-links via the Diels–Alder reaction at the same time.

Ambient temperature induced Diels–Alder crosslinked networks based on controlled methacrylate copolymers for enhanced thermoreversibility and self-healability

An effective thermoreversible crosslinked network fabricated at ambient temperature from a new, controlled methacrylate copolymer having reactive maleimide pendants and a trifunctional furan (TFu) exhibiting effective self-healability.