Experimental Evidence for Hydrogen Bonding in Polyaniline: Mechanism of Aggregate Formation and Dependency on Oxidation State

High Modulus Epoxy/GO-PANI Self-Healing Materials Without Catalyst by Molecular Engineering and Nanocomposite Fabrication

Nowadays, self-healing materials have been studied actively in electronics, soft robotics, aerospace, and automobiles because they can prolong the life span of the materials. However, overcoming the trade-off relationship between mechanical properties and self-healing performance is challenging. Herein, graphene oxide-polyaniline (GO-PANI) filler was introduced to overcome this challenge because GO has a highly excellent modulus, and nitrogen atoms in PANI can endow a self-healing ability through hydrogen bonds. Aside from the hydrogen bond in PANI, the hydrogen bond in the carbonyl group and the disulfide exchange bond in the epoxy matrix also helped the materials heal efficiently. Therefore, the modulus of SV-GPN1 (Self-healing Vitrimer-GO-PANI1) reached 770 MPa, and a 65.0% healing efficiency was demonstrated. The modulus and self-healing efficiency were enhanced after adding GO-PANI filler. The self-healing ability, however, deteriorated when adding more GO-PANI filler because it hindered the collision between the molecules. Meanwhile, SV-GPN1 was excellent in reproducibility, which was proven by the experiment that 16.50 mm thick SV-GPN1 also displayed a self-healing ability. Thus, SV-GPN1 can be applied to structural materials in industries like aerospace because of its self-healing ability, excellent modulus, and reproducibility.

Molecular Dynamics Simulation Study on the Structural and Thermodynamic Analysis of Oxidized and Unoxidized Forms of Polyaniline

The conducting polymer polyaniline (PANI) has shown significant interest for the development of electrified membranes (EMs) with superior antifouling characteristics. However, the blending and doping of PANI with other polymers and nanomaterials highly influence the properties of the membrane surface. PANI exists in two forms: oxidized, known as emeraldine salt (ES), and unoxidized, referred to as emeraldine base (EB). Therefore, understanding the different forms of PANI and the variations between the oxidized and unoxidized forms along the length of the polymer chain is intriguing. In this paper, we present the design of a novel copolymer consisting of EB and ES monomers with varying charge densities and different segmental arrangements. We present various intra- and intermolecular structural properties of the PANI chains using all-atom molecular dynamics (MD) simulations. Herein, we present a detailed conformational free energy analysis to understand the conformational transitions of the PANI chains. Our results show increased radius of gyration (Rg) values with increased charge density. Furthermore, we also present the H-bonding, free energy analysis, reduced density gradient (RDG), and solvent-accessible surface area (SASA) values for the observed conformational transitions of PANI. Therefore, these observations are crucial in understanding the complex behavior of chains for designing target-specific polymeric materials.

Structure and Conformational Properties of a Short Polyaniline Chain in a Mixture of Water and Ionic Liquid [1-Ethyl-3-methyl-imidazolium][bistriflimide] Investigated by All-Atom Molecular Dynamics Simulations

Development of antifouling membranes for water treatment using conducting polymers and their composites is a fundamental strategy to mitigate the fouling. This manuscript presents an all-atom molecular dynamics simulations of a conducting polymer, polyaniline (PANI), immersed in an ionic liquids (ILs)-water mixtures. We have considered the ionic liquid 1-ethyl-3-methyl imidazolium bistriflimide, [EMIM]+[BIS]-. The two forms of polyaniline, emeraldine base (EB) and emeraldine salt (ES), were considered. Various intra- and intermolecular structural properties of PANI were analyzed, such as polymer chain radius of gyration Rg, radial distribution functions, and torsional angle distributions. The Rg of EB shows an increase, while the Rg of ES shows a decrease with an increase in the IL concentration. The backbone torsional angle probability distributions show a significant trans state for EB, while a combination of trans and gauche states was observed for ES. Similar supportive distributions were seen in the backbone angular distributions. Radial distribution functions between the carbon atoms at ortho and meta positions of the benzene ring on both ES and EB, as well as the amine group attached between two benzene rings, show an enhanced interaction with the ionic liquid compared to water. Anions have a dominant interaction with the polymer chain when compared to cations. The solvent accessible surface area (SASA) calculations were in accordance with the EB and ES structural properties. The SASA values are more favorable for ES than for EB. H-bond analysis shows a decrease in the number of H-bonds with water as the IL concentration increases.

Synthesis and Characterization of a Multi-Walled Carbon Nanotube-Ionic Liquid/Polyaniline Adsorbent for a Solvent-Free In-Needle Microextraction Method

Sample preparation is an essential process when handling complex matrices. Extraction without using a solvent requires the direct transfer of analytes from the sample to the adsorbent either in the gas or liquid phase. In this study, a wire coated with a new adsorbent was fabricated for in-needle microextraction (INME) as a solvent-free sample extraction method. The wire inserted into the needle was placed in the headspace (HS), which was saturated with volatile organic compounds from the sample in a vial. A new adsorbent was synthesized via electrochemical polymerization by mixing aniline with multi-walled carbon nanotubes (MWCNTs) in the presence of an ionic liquid (IL). The newly synthesized adsorbent using IL is expected to achieve high thermal stability, good solvation properties, and high extraction efficiency. The characteristics of the electrochemically synthesized surfaces coated with MWCNT-IL/polyaniline (PANI) adsorbents were characterized using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and atomic force microscopy (AFM). Then, the proposed HS-INME-MWCNT-IL/PANI method was optimized and validated. Accuracy and precision were evaluated by analyzing replicates of a real sample containing phthalates, showing spike recovery between 61.13% and 108.21% and relative standard deviations lower than 15%. The limit of detection and limit of quantification of the proposed method were computed using the IUPAC definition as 15.84~50.56 μg and 52.79~168.5 μg, respectively. We concluded that HS-INME using a wire coated with the MWCNT-IL/PANI adsorbent could be repeatedly used up to 150 times without degrading its extraction performance in an aqueous solution; it constitutes an eco-friendly and cost-effective extraction method.

Functionalization of Conductive Polymers through Covalent Postmodification

Organic chemical reactions have been used to functionalize preformed conducting polymers (CPs). The extensive work performed on polyaniline (PANI), polypyrrole (PPy), and polythiophene (PT) is described together with the more limited work on other CPs. Two approaches have been taken for the functionalization: (i) direct reactions on the CP chains and (ii) reaction with substituted CPs bearing reactive groups (e.g., ester). Electrophilic aromatic substitution, S_EAr, is directly made on the non-conductive (reduced form) of the CPs. In PANI and PPy, the N-H can be electrophilically substituted. The nitrogen nucleophile could produce nucleophilic substitutions (SN) on alkyl or acyl groups. Another direct reaction is the nucleophilic conjugate addition on the oxidized form of the polymer (PANI, PPy or PT). In the case of PT, the main functionalization method was indirect, and the linking of functional groups via attachment to reactive groups was already present in the monomer. The same is the case for most other conducting polymers, such as poly(fluorene). The target properties which are improved by the functionalization of the different polymers is also discussed.

Phthalocyanines and Porphyrins/Polyaniline Composites (PANI/CuPctBu and PANI/TPPH2) as Sensing Materials for Ammonia Detection

We combined a conducting polymer, polyaniline (PANI), with an organic semiconducting macrocyclic (MCs) material. The macrocycles are the phthalocyanines and porphyrins used to tune the electrical properties of the PANI, which benefits from their ability to enhance sensor response. For this, we proceeded by a simple ultrasonically assisted reaction involving the two components, i.e., the PANI matrix and the MCs, to achieve the synthesis of the composite nanostructure PANI/MCs. The composite nanostructure has been characterized and deposited on interdigitated electrodes (IDEs) to construct resistive sensor devices. The isolated nanostructured composites present good electrical properties dominated by PANI electronic conductivity, and the characterization reveals that both components are present in the nanostructure. The experimental results obtained under gas exposures show that the composite nanostructures can be used as a sensing material with enhanced sensing properties. The sensing performance under different conditions, such as ambient humidity, and the sensor's operating temperature are also investigated. Sensing behavior in deficient humidity levels and their response at different temperatures revealed unusual behaviors that help to understand the sensing mechanism. Gas sensors based on PANI/MCs demonstrate significant stability over time, but this stability is highly reduced after experiments in lower humidity conditions and at high temperatures.

Electroconductive and photoactive poly(phenylenediamine)s with antioxidant and antimicrobial activities for potential photothermal therapy

In recent years, polyaniline derivatives such as poly(phenylenediamine)s have attracted the attention of researchers due to their better solubility, good optical and electrical properties. In the current work, poly(ortho- phenylenediamine)...

NH3 Sensor Based on rGO-PANI Composite with Improved Sensitivity

This work reports on a reduced graphene oxide and poly(aniline) composite (rGO-PANI), with rGO clusters inserted between PANI chains. These clusters were formed due the plasticizing effect of N-methyl-2-pyrrolidone (NMP) solvent, which was added during the synthesis. Further, this composite was processed as thin film onto an interdigitated electrode array and used as the sensitive layer for ammonia gas, presenting sensitivity of 250% at 100 ppm, a response time of 97 s, and a lowest detection limit of 5 ppm. The PANI deprotonation process, upon exposure to NH3, rGO, also contributed by improving the sensitivity due its higher surface area and the presence of carboxylic acids. This allowed for the interaction between the hydrogen of NH3 (nucleophilic character) and the -COOH groups (electrophilic character) from the rGO surface, thereby introducing a promising sensing composite for amine-based gases.

Conducting Polyaniline for Antifouling Ultrafiltration Membranes: Solutions and Challenges

Conjugated polyaniline can impact the field of water filtration membranes due to its hydrophilic and antibacterial nature, facile and inexpensive synthesis procedure, heat and acid tolerance, and unique doping/dedoping chemistry. However, the gelation effect, its rigid backbone, and the limited hydrophilicity of polyaniline severely restrict the adaptability to membranes and their antifouling performance. This Mini Review summarizes important works of polyaniline-related ultrafiltration membranes, highlighting solutions to conquer engineering obstacles in processing and challenges in enhancing surface hydrophilicity with an emphasis on chemistry. As a pH-responsive polymer convertible to a conductive salt, this classic material should continue to bring unconventional advances into the realm of water filtration membranes.

Dye Separation and Antibacterial Activities of Polyaniline Thin Film-Coated Poly(phenyl sulfone) Membranes

We fabricated a nanofiltration membrane consisting of a polyaniline (PANI) film on a polyphenylsulfone (PPSU) substrate membrane. The PANI film acted as a potent separation enhancer and antimicrobial coating. The membrane was analyzed via scanning electron microscopy and atomic force microscopy to examine its morphology, topography, contact angle, and zeta potential. We aimed to investigate the impact of the PANI film on the surface properties of the membrane. Membrane performance was then evaluated in terms of water permeation and rejection of methylene blue (MB), an organic dye. Coating the PPSU membrane with a PANI film imparted significant advantages, including finely tuned nanometer-scale membrane pores and tailored surface properties, including increased hydrophilicity and zeta potential. The PANI film also significantly enhanced separation of the MB dye. The PANI-coated membrane rejected over 90% of MB with little compromise in membrane permeability. The PANI film also enhanced the antimicrobial activity of the membrane. The bacteriostasis (B R) values of PANI-coated PPSU membranes after six and sixteen hours of incubation with Escherichia coli were 63.5% and 95.2%, respectively. The B R values of PANI-coated PPSU membranes after six and sixteen hours of incubation with Staphylococcus aureus were 70.6% and 88.0%, respectively.

Correlation between Nanoscale Elasticity, Semiconductivity, and Structural Order in Functionalized Polyaniline Thin Films

The correlation between structural order, elasticity, and semiconductivity for butylthio-functionalized polyaniline (PANI-SBu) thin films was investigated using atomic force microscopy (AFM)-based techniques with X-ray diffraction (XRD) and scanning electron microscopy (SEM). After different stirring times, the thin films were cast from the solution of PANI-SBu in N-methyl-2-pyrrolidone that was continuously stirred at a constant rate of 150 rpm in an airtight round-bottom flask. According to the XRD and SEM results, the cross-sectional film structure evolved from being generally holey to highly lamellar with an increase in the stirring time. However, some new types of disordered structures began emerging beyond the optimal stirring time, possibly caused by the formation of disordered packing structures as contributed from the overoxidized polyaniline backbones during the additional stirring time. Moreover, according to the investigation results obtained using AFM-based techniques, the out-of-plane elastic moduli and charge mobilities of the PANI-SBu films were consistently smaller for disordered thin films and larger for structurally more ordered ones. The shear force resulting from the mechanical stirring of the PANI-SBu solution may gradually disentangle the polymer chains and thus help transform the individual polyaniline molecule from a coil-like chain conformation to a better extended rodlike chain conformation. Therefore, when cast into a film, the stretched polymer chains facilitate self-organization among the PANI-SBu backbones during the film formation process. Thus, an improved structural order in the film is attained. Our results demonstrate an unambiguous correlation between the structure order, elasticity, and conductivity in PANI-SBu thin films, which may have useful applications in conducting polymer-based flexible electronics.

Ultrasonic-Assisted Synthesis and Characterization of Chitosan-Graft-Substituted Polyanilines: Promise Bio-Based Nanoparticles for Dye Removal and Bacterial Disinfection

The sonication-mediated oxidative-radical copolymerization using ammonium persulfate in acidic medium provides a new successful avenue to graft Chitosan with three methylaniline derivatives. The synthesized Chitosan-graft-polymethylanilines (CGPMA) were characterized using FTIR, UV-vis diffuse reflectance spectroscopy, XRD, thermogravimetric analysis (TGA), elemental analysis, and transmission electron microscopy (TEM). XRD spectra revealed that CGPMA have a higher crystallinity degree compared to the pristine Chitosan. In addition, a methyl position-dependent crystallinity is noticeable for the grafted copolymers. This could be confirmed from TEM images that reflect structure-affected morphologies of different ordering for the graft spherical nanoparticles. Interestingly, the copolymers prepared under ultrasonic irradiation show a high potency in dye uptake compared to nonsonicated ones. Moreover, an antibacterial preliminary test on the as-prepared materials was accomplished. We have achieved promising results, which encourages us to conduct more studies to process these materials in developing biomedical active composites.

Lifetime-tunable room-temperature phosphorescence of polyaniline carbon dots in adjustable polymer matrices

Despite the excellent room-temperature phosphorescence (RTP) property of carbon dot (CD)-based RTP composites, the development of these emerging materials with finely tunable afterglow lifetimes still remains a challenge. Herein, for the first time, we report a series of pure organic RTP composite materials based on adjustable polyaniline carbon dots (PACDs) and polymer matrices (polyacrylic acid, polyacrylamide, and polyvinyl alcohol) with tunable RTP lifetimes. By using different polymer matrices and adjusting the functional groups of PACDs, the strength of hydrogen bonding between each polymer matrix and PACDs was regulated, and green RTP emissions with a tunable average lifetime ranging from 184 ms to 652 ms were also realized. In addition, taking advantage of their different persistent afterglow lifetimes, naked-eye-observable and time-resolved anti-counterfeit and data encryption patterns were prepared using these PACDs/polymer composites, demonstrating the potential application of these materials.

Degradation of 1,2-dichloroethane by photocatalysis using immobilized PAni-TiO2 nano-photocatalyst

1,2-Dichloroethane is one of the most hazardous environmental pollutants in wastewaters. It is mainly used to produce vinyl chloride monomer, the major precursor for PVC production. It is determined to be a probable human carcinogen and has been listed as a priority pollutant by the United States Environmental Protection Agency. Due to high chemical stability and low biodegradability of 1,2-dichloroethane, heterogeneous photocatalysis was used for degradation of this chlorinated hydrocarbon. PAni-TiO₂ nanocomposite was synthesized by in situ deposition oxidative polymerization method and immobilized on glass beads by a modified dip coating and heat attachment method. The characteristics of synthesized PAni-TiO₂ nanoparticles were confirmed using the results of morphology tests including Fourier-transform infrared spectra, X-ray diffraction patterns, particle size analysis, UV-Visible spectrophotometer, scanning electron microscope, and energy-dispersive X-ray spectroscopy. The performance of photocatalytic degradation of 1,2-dichloroethane using synthesized PAni-TiO₂ nanocomposite in a designed and constructed pilot scale packed bed recirculating photocatalytic reactor under xenon light irradiation was investigated. The response surface methodology based on the central composite design was used to evaluate and optimize the effect of 1,2-dichloroethane concentration, residence time, pH, and coating mass as independent variables on the photocatalytic degradation of 1,2-dichloroethane as the response function. Results showed that actual and predicted results were well fitted with R² of 0.9870, adjusted R² of 0.9718, and predicted R² of 0.9422. The optimum conditions for 1,2-dichloroethane photocatalytic degradation were the 1,2-dichloroethane concentration of 250 mg/L, the residence time of 240 min, pH of 5, and coating mass of 0.5 mg/cm², which resulted in 88.84% photocatalytic degradation. Kinetic of the photocatalytic degradation at optimal condition follows the Langmuir-Hinshelwood first-order reaction with k = 0.0095 min^-1 with R² = 0.9455. Complete photocatalytic degradation of 1,2-DCE was achieved after 360 min.

Radical addition polymerization: Enzymatic template-free synthesis of conjugated polymers and their nanostructure fabrication

Conjugated polymers are attractive for many applications due to their unique properties. Their molecular structure can easily be tuned, making them suitable for an enormous number of specific applications. Conjugated polymers have the potential to achieve electrical properties similar to those of noncrystalline inorganic semiconductors; however, their chemical structure is much more complex and somewhat resembles that of biomacromolecules. The molecular conformation and interactions of conjugated polymers play an important role in their functionality. The use of enzymes has emerged as a highly valuable alternative method to synthesize these polymers and is very useful in the fabrication of their nanostructures. Here, we present established strategies for the synthesis of conjugated polymers in template-free systems that do not interfere with the preparation of their nanostructures. These strategies are based on the use of peroxidases (class III; EC 1.11.1.7, donor: hydrogen peroxide oxidoreductase), which are enzymes that have the ability to catalyze the oxidation of a number of compounds (including aromatics such as aniline, pyrrole, thiophene and some of their derivatives), in the presence of hydrogen peroxide, to obtain conjugated polymers.

Cellulose Nanofiber-Based Polyaniline Flexible Papers as Sustainable Microwave Absorbers in the X-Band

A series of flexible, lightweight, and highly conductive cellulose nanopapers were fabricated through in situ polymerization of aniline monomer on to cellulose nanofibers with a rationale for attenuating electromagnetic radiations within 8.2-12.4 GHz (X band). The demonstrated paper exhibits good conductivity due to the formation of a continuous coating of polyaniline (PANI) over the cellulose nanofibers (CNF) during in situ polymerization, which is evident from scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. The free hydroxyl groups on the surface of nanocellulose fibers promptly form intermolecular hydrogen bonding with PANI, which plays a vital role in shielding electromagnetic radiations and makes the cellulose nanopapers even more robust. These composite nanopapers exhibited an average shielding effectiveness of ca. -23 dB (>99% attenuation) at 8.2 GHz with 1 mm paper thickness. The fabricated papers exhibited an effective attenuation of electromagnetic waves by a predominant absorption mechanism (ca. 87%) rather than reflection (ca. 13%), which is highly desirable for the present-day telecommunication sector. Unlike metal-based shields, these demonstrated PANI/CNF papers have given a new platform for designing green microwave attenuators via an absorption mechanism. The prime novelty of the present study is that these robust PANI/CNF nanopapers have the ability to attenuate incoming microwave radiations to an extent that is 360% higher than the shielding effectiveness value reported in the previous literature. This makes them suitable for use in commercial electronic gadgets. This demonstrated work also opens up new avenues for using cellulose nanofibers as an effective substrate for fabricating conductive flexible papers using polyaniline. The direct current conductivity value of PANI/CNF nanopaper was 0.314 S/cm, which is one of the key requisites for the fabrication of efficient electromagnetic shields. Nevertheless, such nanopapers also open up an arena of applications such as electrodes for supercapacitors, separators for Li-S, Li-polymer batteries, and other freestanding flexible paper-based devices.

Room temperature synthesis of pH-switchable polyaniline quantum dots as a turn-on fluorescent probe for acidic biotarget labeling

The synthesis of well-defined light-element-derived quantum dots (LEQDs) with advanced optical properties under mild conditions is highly desirable yet challenging. Here, a polyaniline (PANI) structure is introduced into carbon-rich LEQDs to yield well-defined, fluorescent polyaniline quantum dots (PAQDs), PAQD24, through a one-pot room temperature reaction. The mild synthetic conditions effectively minimize the defects introduced during the conventional synthesis and endow PAQD24 with desirable optical properties, including a narrow emission band (full width at half maximum = 55 nm), an optimal quantum yield of 32.5% and two-photon fluorescence. Furthermore, the bandgap of PAQD24 is highly sensitive toward pH variations in the near-neutral region, due to the proton doping and dedoping of the PANI structure. Such unique properties together with its fine bio-compatibility enable the application of this material as a turn-on fluorescent probe for the labeling of acidic biotargets from sub-cellular to organ levels, providing potential applications in diagnosis and surgery guidance for certain diseases.

Porous microspheres of polyaniline, poly(o-toluidine), and poly(m-toluidine) prepared from double emulsions stabilized by toluidine isomers as the single surfactant

HYPOTHESIS

Porous spheres of the conducting polymer polyaniline (PANI) and its derivatives are promising materials for use as functional encapsulants for payload delivery and catalyst supports. Stable water-in-oil-in water (W/O/W) double emulsions can be used to obtain this morphology, but typically require multiple surfactants and stabilizers. A single surfactant system that uses a small amphiphilic molecule is desirable, as it can simplify the method, improve its efficiency, and reduce its cost.

EXPERIMENTS

Granular poly(o-toluidine) (POT) was transformed into porous microspheres when ammonium hydroxide was added to an aqueous acidic dispersion containing the preformed polymer and amphiphilic o-toluidine (OT). The OT, POT, and ammonium hydroxide concentrations were varied to understand the formation mechanism. Conditions were optimized to obtain a narrowed size distribution.

FINDINGS

The rapid change from acidic to alkaline surroundings produces a W/O/W double emulsion from POT and OT over a relatively narrow concentration range. Spheres form when POT dissolves in immiscible OT droplets, and entrapped water droplets form the pores. OT serves as the single amphiphilic surfactant and dissolved POT serves as a hydrophobic co-stabilizer. o-Toluidine, m-toluidine, or p-toluidine could be used as the single surfactant to obtain porous spheres from preformed POT, PANI and poly(m-toluidine).

Thermal-sensitive viscosity transition of elongated micelles induced by breaking intermolecular hydrogen bonding of amide groups

A heat-induced viscosity transition of novel worm-like micelles of a long alkyl-chain amidoamine derivative (C18AA) bearing intermolecular hydrogen-bonding group was investigated by cryo-TEM, FT-IR, and rheological measurements. At lower temperature, C18AA forms straight elongated micelles with a length on the order of micrometers due to strong intermolecular hydrogen-bonded packing of the amide groups, although the micelles rarely entangle and have low value of zero-shear viscosity. The straight elongated micelles likely became flexible and underwent a morphological transition from straight structure to worm-like structure at a certain temperature, which caused a drastic increase in viscosity due to entanglement of the micelles. This morphological transition was caused by a defect of intermolecular hydrogen bonding between the amide groups on heating. Furthermore, addition of LiCl, which acts as hydrogen-bond breaker, also promoted the viscosity transition, leading to a lowering of the transition temperature.

ROLE OF MOLYBDENUM TRIOXIDE ON THERMAL STABILITY OF POLYANILINE NANOCOMPOSITE

Molybdenum trioxide (MoO3) grains were coated with conducting organic polymer of polyaniline. The as-prepared nanocomposite samples were characterized by Fourier transformed infrared (FTIR) spectra, X-ray diffraction (XRD) and Thermogravimetry (TGA). The XRD curves shows that, [Formula: see text] have high crystallinity due to the presence of large number of sharp peaks. From the XRD pattern the particle size is evaluated by using Debye-Scherrer's formula and the average particle size of [Formula: see text] and [Formula: see text] nanocomposites are found to be 46 and 32 nm, respectively. This is clearly observed that the condensed particle size of nanocomposite materials is due to the insertion of metal oxide of molybdenum. The incorporation of metal oxide of MoO3 in polyaniline (Pani) is confirmed by FTIR spectral studies. After de-doping, the characteristic peaks of Pani for all the Pani materials are almost same. This is due to the leaching of metal oxide of MoO3 from Pani. From these observations it is noted that doping–dedoping can also take place in inorganic metal oxides. The thermogram showed a three-step degradation process. The first weight loss step was due to the removal of physisorbed water molecules and moisture. The second minor weight loss step was associated with the removal of dopant from Pani backbone and the slight degradation of benzenoid structure of Pani and their thermal stability is enhanced. The third weight loss step was ascribed to the degradation of quinoid form of Pani. This confirmed the thermal stability of [Formula: see text] nanocomposite system. After degradation above 1000°C, the Pani with MoO3 showed a remaining weight of 8%. This confirmed that incorporation of metal oxide in the Pani nanocomposites is 8%. The enhancement of thermal stability is due to the intercalation of Pani chains into MoO3 in first two step degradation, which is further supported by FTIR and XRD reports. The third step degradation of Pani with MoO3 nanocomposite is loosely bound in organic and inorganic part. Therefore, the organic part is easily decomposed.