Physical Stability of the Amorphous Anticholesterol Agent (Ezetimibe): The Role of Molecular Mobility

Rapid screening of ternary amorphous formulations by a spray drying robot

Spray drying is commonly used for producing amorphous solid dispersions to improve drug solubility. The development of such formulations typically relies on comprehensive excipient and composition screening, which requires the preparation of many spray-dried powder samples. This is both labour-intensive and time-consuming when carried out manually. In the present work, the formulation screening task was automated by coupling a laboratory spray dryer operated in a semi-continuous mode with custom-made add-ons, allowing for rapid, computer-controlled production of formulation samples with systematically varying composition. The practical use of the spray drying robot in formulation development was demonstrated on a case study of poorly water-soluble model drugs simvastatin and ezetimibe. Six different polymers and several drug:polymer ratios were screened for the enhancement of dissolution properties. From a pool of 28 spray-dried samples, ternary compositions containing Eudragit L100-55 were identified as the most suitable ones for further processing and characterisation. The ability to populate the formulation design space rapidly and automatically made it possible to construct maps of physico-chemical properties such as glass transition temperature or dissolution rate. The spray drying robot thus enables the acceleration of early formulation development and a deeper understanding of composition-property relationships for multi-component spray dried powders.

Effect of Shear Strain on the Supercooled Itraconazole

This article investigated the effect of shear strain on the nematic itraconazole (ITR) from both elastic and plastic deformation regions. The rheo-dielectric technique was used for this purpose. It has been demonstrated that shear strain can change the sample color, liquid crystal alignment as well as its dielectric and thermal properties. The observed modifications depend on the shear strain value. One can distinguish four regions regarding the slope of ITR stress-strain dependence and caused changes. Proper alignment changes (obtained after the shearing procedure) can additionally affect the further recrystallization of ITR to other than the initial, i.e., second polymorphic form.

The Impact of Water-Soluble Chitosan on the Inhibition of Crystal Nucleation of Alpha-Mangostin from Supersaturated Solutions

The use of an amorphous drugs system to generate supersaturated solutions is generally developed to improve the solubility and dissolution of poorly soluble drugs. This is because the drug in the supersaturation system has a high energy state with a tendency to precipitate. In the amorphous solid dispersion (ASD) formulation, it was discovered that polymer plays a critical role in inhibiting nucleation or crystal growth of the drugs. Therefore, this study aimed to evaluate the crystallization inhibition of water-soluble chitosan (WSC) on nucleation as well as crystal growth from alpha-mangostin (AM) and elucidate its inhibition mechanism in the supersaturated solutions. During the experiment, WSC was used as a polymer to evaluate its ability to inhibit AM nucleation. The interaction between WSC and AM was also estimated using FT-IR, NMR, and in silico study. The result showed that in the absence of polymer, the concentration of AM rapidly decreased due to the precipitation in one minute. Meanwhile, the addition of WSC effectively inhibited AM crystallization and maintained a supersaturated state for the long term. FT-IR measurement also revealed that the shift in the amine primer of WSC occurred because of the interaction between WSC and AM. In the 1H NMR spectra, the proton peaks of WSC showed an upfield shift with the presence of AM, indicating the intermolecular interactions between AM and WSC. Moreover, in silico study revealed the hydrogen bond interaction between the carbonyl group of AM with hydrocarbon groups of WSC. This indicated that WSC interacted with AM in the supersaturated solution and suppressed their molecular mobility, thereby inhibiting the formation of the crystal nucleus. Based on these results, it can be concluded that the interaction between drug polymers contributed to the maintenance of the drug supersaturation by inhibiting both nucleation and growth.

A systematic and robust assessment of hot-melt extrusion-based amorphous solid dispersions: Theoretical prediction to practical implementation

Amorphous solid dispersions (ASDs) have gained attention as a formulation strategy in recent years, with the potential to improve the apparent solubility and, hence, the oral bioavailability of poorly soluble drugs. The process of formulating ASDs is commonly faced with challenges owing to the intrinsic physical and chemical instability of the initial amorphous form and the long-term physical stability of drug formulations. Numerous research publications on hot-melt extrusion (HME) technology have demonstrated that it is the most efficient approach for manufacturing reasonably stable ASDs. The HME technique has been established as a faster scale-up production strategy for formulation evaluation and has the potential to minimize the time to market. Thermodynamic evaluation and theoretical predictions of drug-polymer solubility and miscibility may assist to reduce the product development cost by HME. This review article highlights robust and established prediction theories and experimental approaches for the selection of polymeric carriers for the development of hot melt extrusion based stable amorphous solid dispersions (ASDs). In addition, this review makes a significant contribution to the literature as a pilot guide for ASD assessment, as well as to confirm the drug-polymer compatibility and physical stability of HME-based formulations.

Studies on the Vitrified and Cryomilled Bosentan

In this paper, several experimental techniques [X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetry, Fourier transform infrared spectroscopy, and broad-band dielectric spectroscopy] have been applied to characterize the structural and thermal properties, H-bonding pattern, and molecular dynamics of amorphous bosentan (BOS) obtained by vitrification and cryomilling of the monohydrate crystalline form of this drug. Samples prepared by these two methods were found to be similar with regard to their internal structure, H-bonding scheme, and structural (α) dynamics in the supercooled liquid state. However, based on the analysis of α-relaxation times (dielectric measurements) predicted for temperatures below the glass-transition temperature (T_g), as well as DSC thermograms, it was concluded that the cryoground sample is more aged (and probably more physically stable) compared to the vitrified one. Interestingly, such differences in physical properties turned out to be reflected in the lower intrinsic dissolution rate of BOS obtained by cryomilling (in the first 15 min of dissolution test) in comparison to the vitrified drug. Furthermore, we showed that cryogrinding of the crystalline BOS monohydrate leads to the formation of a nearly anhydrous amorphous sample. This finding, different from that reported by Megarry et al. [Carbohydr. Res.2011, 346, 1061−106421492830] for trehalose (TRE), was revealed on the basis of infrared and thermal measurements. Finally, two various hypotheses explaining water removal upon cryomilling have been discussed in the manuscript.

Ternary Eutectic Ezetimibe-Simvastatin-Fenofibrate System and the Physical Stability of Its Amorphous Form

In this study, the phase diagram of the ternary system of ezetimibe–simvastatin–fenofibrate was established. It has been proven that the ternary composition recommended for the treatment of mixed hyperlipidemia forms a eutectic system. Since eutectic mixtures are characterized by greater solubility and dissolution rate, the obtained result can explain the marvelous medical effectiveness of combined therapy. Considering that another well-known method for improving the aqueous solubility is amorphization, the ternary system with eutectic concentration was converted into an amorphous form. Thermal properties, molecular dynamics, and physical stability of the obtained amorphous system were thoroughly investigated through various experimental techniques compared to both: neat amorphous active pharmaceutical ingredients (considered separately) and other representative concentrations of ternary mixture. The obtained results open up a new way of selecting the therapeutic concentrations for combined therapies, a path that considers one additional variable: eutecticity.

How can we improve the physical stability of co-amorphous system containing flutamide and bicalutamide? The case of ternary amorphous solid dispersions

The article describes the preparation and characterization of binary mixtures of two antiandrogens used in prostate cancer treatment, i.e. flutamide (FL) and bicalutamide (BIC), as well as their ternary mixtures with either poly(methyl methacrylate-co-ethyl acrylate) (MMA/EA) or polyvinylpyrrolidone (PVP). The samples were converted into amorphous form to improve their water solubility and dissolution rate. Broadband dielectric spectroscopy and differential scanning calorimetry revealed that FL-BIC (65%) (w/w) does not tend to crystallize from the supercooled liquid state. We made the assumption that the drug-to-drug weight ratio should be maintained as in the case of monotherapy so we decided to investigate the system containing FL and BIC in 15:1 (w/w) ratio with 30% additive of polymers as stabilizers. Our research has shown that only in the case of the FL-BIC-PVP mixture the crystallization has been completely inhibited, both in glassy and supercooled liquid state, which was confirmed by X-ray diffraction studies. In addition, we performed solubility and dissolution rate tests, which showed a significant improvement in solubility of ternary system as compared to its crystalline counterpart. Enhanced physical stability and water solubility of the amorphous ternary system makes it promising for further studies.

How Does the Addition of Kollidon®VA64 Inhibit the Recrystallization and Improve Ezetimibe Dissolution from Amorphous Solid Dispersions?

Amorphization serves as a strategy for the improvement of poor dissolution characteristics of many drug compounds. However, in many formulations the content of polymeric stabilizer is high, which is undesirable from the perspective of future applications. Thus, studying the composition-dependent stability of amorphous solid dispersions seems to be demanded. In this paper, we describe the amorphization of ezetimibe, a lipid-lowering drug, in the spray drying process and investigate the effect of polyvinylpyrrolidone-co-poly(vinyl acetate) (PVP/VA) content on the physical stability and dissolution characteristics of the drug. Fully amorphous systems were obtained when the concentration of the polymer in solid dispersion was as low as 20%. The amorphization led to the dissolution enhancement by even 70%, with a noticeable sudden increase at around 40% of PVP/VA content and very small variations for systems having 66-90% PVP/VA. It was also correlated to wettability characteristics of solid dispersions, which may suggest that in the vicinity of 40% of the polymer content, the behavior of the system becomes independent of the PVP/VA content.

Impact of the Chain Length and Topology of the Acetylated Oligosaccharide on the Crystallization Tendency of Naproxen from Amorphous Binary Mixtures

The impact of the chain length or dispersity of polymers in controlling the crystallization of amorphous active pharmaceutical ingredients (APIs) has been discussed for a long time. However, because of the weak control of these parameters in the majority of macromolecules used in pharmaceutical formulations, the abovementioned topic is poorly understood. Herein, four acetylated oligosaccharides, maltose (acMAL), raffinose (acRAF), stachyose (acSTA), and α-cyclodextrin (ac-α-CD) of growing chain lengths and different topologies (linear vs cyclic), mimicking the growing backbone of the polymer, were selected to probe the influence of these structural factors on the crystallization of naproxen (NAP)—an API that does not vitrify regardless of the cooling rate applied in our experiment. It was found that in equimolar systems composed of NAP and linear acetylated oligosaccharides, the progress and activation barrier for crystallization are dependent on the molecular weight of the excipient despite the fact that results of Fourier transform infrared studies indicated that there is no difference in the interaction pattern between measured samples. On the other hand, complementary dielectric, calorimetric, and X-ray diffraction data clearly demonstrated that NAP mixed with ac-α-CD (cyclic saccharide) does not tend to crystallize even in the system with a much higher content of APIs. To explain this interesting finding, we have carried out further density functional theory computations, which revealed that incorporation of NAP into the cavity of ac-α-CD is hardly possible because this state is of much higher energy (up to 80 kJ/mol) with respect to the one where the API is located outside of the saccharide torus. Hence, although at the moment, it is very difficult to explain the much stronger impact of the cyclic saccharide on the suppression of crystallization and enhanced stability of NAP with respect to the linear carbohydrates, our studies clearly showed that the chain length and the topology of the excipient play a significant role in controlling the crystallization of this API.

Correlationship of Drug-Polymer Miscibility, Molecular Relaxation and Phase Behavior of Dipyridamole Amorphous Solid Dispersions

In present work, a correlationship among quantitative drug-polymer miscibility, molecular relaxation and phase behavior of the dipyridamole (DPD) amorphous solid dispersions (ASDs), prepared with co-povidone (CP), hydroxypropyl methylcellulose phthalate (HPMC P) and hydroxypropyl methylcellulose acetate succinate (HPMC AS) has been investigated. Miscibility predicted using melting point depression approach for DPD with CP, HPMC P and HPMC AS at 25 °C was 0.93% w/w, 0.55% w/w and 0.40% w/w, respectively. Stretched relaxation time (τ^β) for DPD ASDs, measured using modulated differential scanning calorimetry (MDSC) at common degree of undercooling, was in the order of DPD- CP > DPD-HPMC P > DPD-HPMC AS ASDs. Phase behavior of 12 months aged (25 ± 5 °C and 0% RH) spray dried 60% w/w ASDs was tracked using MDSC. Initial ASD samples had homogeneous phase revealed by single glass transition temperature (T_g) in the MDSC. MDSC study of aged ASDs revealed single-phase DPD-CP ASD, amorphous-amorphous and amorphous-crystalline phase separated DPD-HPMC P and DPD-HPMC AS ASDs, respectively. The results were supported by X-ray micro computed tomography and confocal laser scanning microscopy studies. This study demonstrated a profound influence of drug-polymer miscibility on molecular mobility and phase behavior of ASDs. This knowledge can help in designing "physical stable" ASDs.

Exploring molecular reorientations in amorphous and recrystallized felodipine at the microscopic level

Molecular reorientations were studied in amorphous, partially and fully recrystallized felodipine (calcium channel blocker, a drug from the family of 1',4-dihydropyridine) using a set of experimental methods: high-resolution solid-state nuclear magnetic resonance (NMR), relaxometry NMR and quasielastic neutron scattering (QENS). The results were compared with molecular dynamics in crystalline felodipine previously investigated [A. Pajzderska, K. Drużbicki, M. A. Gonzalez, J. Jenczyk, J. Mielcarek, J. Wąsicki, Diversity of Methyl Group Dynamics in Felodipine: a DFT Supported NMR and Neutron Scattering Study, CrystEngComm, 2018, 20, 7371-7385]. The kinetics of the recrystallization was also studied. The most stable sample was the sample stored in a closed ampoule (at room temperature, in 0% RH) and its complete recrystallization lasted 105 days. In the fully recrystallized sample, the same molecular reorientation identified in the crystalline form was detected, so reorientations of all methyl groups and the ethyl ester fragment. In the partially recrystallized sample, static disorder caused by the two positions of both side chains was revealed. In the amorphous sample the reorientation of all methyl groups was analyzed and the distribution of correlation times and energy barriers connected with the loss of long-range ordering and disorder of side chains were analyzed. Additionally, inhibition of reorientation in the ethyl ester fragment was observed.

Enhancement of the Physical Stability of Amorphous Sildenafil in a Binary Mixture, with either a Plasticizing or Antiplasticizing Compound

The main purpose of this paper was to evaluate the impact of both high- and low-T_g polymer additives on the physical stability of an amorphous drug, sildenafil (SIL). The molecular mobility of neat amorphous SIL was strongly affected by the polymeric excipients used (Kollidon VA64 (KVA) and poly(vinylacetate) (PVAc)). The addition of KVA slowed down the molecular dynamics of amorphous SIL (antiplasticizing effect), however, the addition of PVAc accelerated the molecular motions of the neat drug (plasticizing effect). Therefore, in order to properly assess the effect of the polymer on the physical stability of SIL, the amorphous samples at both: isothermal (at constant temperature—353 K) and isochronal (at constant relaxation time—τ_α = 1.5 ms) conditions were compared. Our studies showed that KVA suppressed the recrystallization of amorphous SIL more efficiently than PVAc. KVA improved the physical stability of the amorphous drug, regardless of the chosen concentration. On the other hand, in the case of PVAc, a low polymer content (i.e., 25 wt.%) destabilized amorphous SIL, when stored at 353 K. Nevertheless, at high concentrations of this excipient (i.e., 75 wt.%), its effect on the amorphous pharmaceutical seemed to be the opposite. Therefore, above a certain concentration, the PVAc presence no longer accelerates the SIL recrystallization process, but inhibits it.

Importance of Mesoporous Silica Particle Size in the Stabilization of Amorphous Pharmaceuticals-The Case of Simvastatin

In this paper, the role of mesoporous silica (MS) particle size in the stabilization of amorphous simvastatin (SVT) is revealed. For inhibiting recrystallization of the supercooled drug, the two MS materials (Syloid® XDP 3050 and Syloid® 244 FP) were employed. The crystallization tendency of SVT alone and in mixture with the MS materials was investigated by Differential Scanning Calorimetry (DSC) and Broadband Dielectric Spectroscopy (BDS). Neither confinement of the SVT molecules inside the MS pores nor molecular interactions between functional groups of the SVT molecules and the surface of the stabilizing excipient could explain the observed stabilization effect. The stabilization effect might be correlated with diffusion length of the SVT molecules in the MS materials that depended on the particle size. Moreover, MS materials possessing different particle sizes could offer free spaces with different sizes, which might influence crystal growth of SVT. All of these factors must be considered when mesoporous materials are used for stabilizing pharmaceutical glasses.

Exploring the molecular reorientations in amorphous rosuvastatin calcium

Molecular reorientations in rosuvastatin calcium, a drug that is widely used to prevent cardiovascular disease, were explored thoroughly by means of solid state nuclear magnetic resonance (¹H and ¹³C NMR) combined with calculations of steric hindrances. The experimental results reveal rich internal reorientational dynamics. All relaxation processes were tested in a broad range of temperatures and described in terms of their type and the associated energy barriers. The internal molecular mobility of rosuvastatin calcium can be associated with the reorientational dynamics of four methyl groups, accompanied by reorientation of the isopropyl group. The energy barriers of methyl and isopropyl group reorientation depended on the type of E/Z isomers, while the water content also had a strong influence on the dynamics of the isopropyl group. In the paper, a consistent picture of the molecular dynamics is provided, facilitating our understanding of molecular mobility in this important pharmaceutical solid.

Molecular reorientations in rosuvastatin calcium, a drug that is widely used to prevent cardiovascular disease, were explored thoroughly by means of solid state nuclear magnetic resonance (¹H, ¹³C NMR) combined with calculations of steric hindrances.

Central composite designed ezetimibe solid dispersion for dissolution enhancement: synthesis and in vitro evaluation

Aim: The current research is focused on increasing aqueous solubility and dissolution of BCS class II drug by using modified solvent evaporation technique to produce solid dispersions of ezetimibe (EZSD) using gelucire 50/13 and polyvinyl pyrollidone K30. Methodology & results: Central composite design analyzed the effect of gelucire 50/13 and polyvinyl pyrollidone K30 on the percentage of drug released in 5 and 30 min. Ezetimibe (EZ) aqueous saturation solubility (4.56 ± 0.94 μg/ml) was increased 25-fold in EZSD (115 ± 3.41 μg/ml). Cumulative drug release from EZ and optimized EZSD were observed 24.67 and 87.54% within 1 h, respectively. Conclusion: Manufacturing EZSD using modified solvent evaporation technique using rotary evaporator holds great promise for enhancing EZ's solubility and dissolution.

Molecular Mobility of Terfenadine: Investigation by Dielectric Relaxation Spectroscopy and Molecular Dynamics Simulation

The molecular mobility of an amorphous active pharmaceutical ingredient, terfenadine, was carefully investigated by dielectric relaxation spectroscopy and molecular dynamics simulation for the first time. Comprehensive characterization on a wide frequency (10^-2 to 10⁹ Hz) and temperature (300 K) range highlights the fragile nature of this good glass-former (m = 112) and the relatively large nonexponentiality of the main relaxation (β_KWW = 0.53 ± 0.01). In the glassy state, a particularly broad secondary relaxation of intramolecular origin is evidenced. Terfenadine is a flexible molecule, and from molecular dynamics simulation, a clear link is established between the flexibility of the central part of the molecule (carrying, on the one side, the nitrogen group, and on the other side, the OH group) and the distribution of dipole moments, which explains that broadness. Terfenadine is one of the very few cases for which the molecular mobility of the glass obtained by the quench of the melt or by milling can be compared. From the present study, no major difference in terms of molecular mobility is found between these two glasses. However, terfenadine amorphized by milling (for 1-20 h) clearly shows a lower stability than the quenched liquid as we observed its recrystallization upon heating. Interestingly, it is shown that this recrystallization upon heating is not complete and that the 1-2% of the remaining amorphous phase has an original behavior. Indeed, it exhibits an enhanced main mobility induced by an autoconfinement effect created by the surrounding crystalline phase.

Molecular Dynamics and Physical Stability of Pharmaceutical Co-amorphous Systems: Correlation Between Structural Relaxation Times Measured by Kohlrausch-Williams-Watts With the Width of the Glass Transition Temperature (ΔTg) and the Onset of Crystallization

The study aims to characterize the structural relaxation times of quench-cooled co-amorphous systems using Kohlrausch-Williams-Watts (KWW) and to correlate the relaxation data with the onset of crystallization. Comparison was also made between the relaxation times obtained by KWW and the width of glass transition temperature (ΔT_g) methods (simple and quick). Differential scanning calorimetry, Fourier-transformed infrared spectroscopy, and polarized light microscopy were used to characterize the systems. Results showed that co-amorphous systems yielded a single T_g and ΔC_p, suggesting the binary mixtures exist as a single amorphous phase. A narrow step change at T_g indicates the systems were fragile glasses. In co-amorphous nap-indo and para-indo, experimental T_gs were in good agreement with the predicted T_g. However, the T_g of co-amorphous nap-cim and indo-cim were 20°C higher than the predicted T_g, possibly due to stronger molecular interactions. Structural relaxation times below the experimental T_g were successfully characterized using the KWW and ΔT_g methods. The comparison plot showed that KWW data are directly proportional to the ½ power of ΔT_g data, after adjusting for a small offset. A moderate positive correlation was observed between the onset of crystallization and the KWW data. Structural relaxation times may be useful predictor of physical stability of co-amorphous systems.

How does the high pressure affects the solubility of the drug within the polymer matrix in solid dispersion systems

In this paper, we employed Broadband Dielectric Spectroscopy (BDS) in order to determine the effect of the high pressure on the solubility limits of the amorphous flutamide within Kollidon VA64 matrix. In order to achieve this goal, drug-polymer systems have been examined: (i) at ambient pressure and both isothermal and nonisothermal conditions by means of BDS as well as Differential Scanning Calorimetry (DSC), to validate proposed method; (ii) at high pressure conditions (20 and 50 MPa) and elevated temperatures (343 K, 353 K and 363 K) by means of dielectric spectroscopy. Our studies revealed that regardless of applied pressure the solubility of the flutamide within the co-polymer matrix increases with increasing temperature at isobar conditions. Moreover, our results clearly indicate that with increasing pressure the solubility of the drug within the polymer matrix is decreasing at isothermal conditions. Therefore, during the solubility limit studies one should consider the situation in which by increasing the pressure (at constant temperature) would achieve an effect similar to the lowering of the temperature (at constant pressure).

How can we improve the physical stability of co-amorphous system containing flutamide and bicalutamide? The case of ternary amorphous solid dispersions

The article describes the preparation and characterization of binary mixtures of two antiandrogens used in prostate cancer treatment, i.e. flutamide (FL) and bicalutamide (BIC), as well as their ternary mixtures with either poly(methyl methacrylate-co-ethyl acrylate) (MMA/EA) or polyvinylpyrrolidone (PVP). The samples were converted into amorphous form to improve their water solubility and dissolution rate. Broadband dielectric spectroscopy and differential scanning calorimetry revealed that FL-BIC (65%) (w/w) does not tend to crystallize from the supercooled liquid state. We made the assumption that the drug-to-drug weight ratio should be maintained as in the case of monotherapy so we decided to investigate the system containing FL and BIC in 15:1 (w/w) ratio with 30% additive of polymers as stabilizers. Our research has shown that only in the case of the FL-BIC-PVP mixture the crystallization has been completely inhibited, both in glassy and supercooled liquid state, which was confirmed by X-ray diffraction studies. In addition, we performed solubility and dissolution rate tests, which showed a significant improvement in solubility of ternary system as compared to its crystalline counterpart. Enhanced physical stability and water solubility of the amorphous ternary system makes it promising for further studies.

Influence of Polymeric Additive on the Physical Stability and Viscoelastic Properties of Aripiprazole

In this article, we investigated aripiprazole + Kollidon VA64 (ARP/KVA) and aripiprazole + Soluplus (ARP/SOP) amorphous solid dispersions. Thermal properties of all prepared systems have been examined by means of differential scanning calorimetry (DSC). Compositions revealing the recrystallization tendency were subsequently investigated by means of broadband dielectric spectroscopy (BDS). On the basis of dielectric data, the physically stable drug-polymer concentrations have been found. Finally, these systems have been investigated by rheology, which enables us to determine the minimal temperature required for dissolving the drug in the polymeric matrix, as well as the temperature dependence of the sample viscosity. Our investigations have shown that the amorphous form of the investigated antipsychotic drug might be effectively stabilized by both employed polymers. However, due to the better stabilization effect and the more favorable rheological properties, KVA proved to be a better polymeric excipient for extrusion of amorphous aripiprazole.

Physical Stability and Viscoelastic Properties of Co-Amorphous Ezetimibe/Simvastatin System

The purpose of this paper is to examine the physical stability as well as viscoelastic properties of the binary amorphous ezetimibe⁻simvastatin system. According to our knowledge, this is the first time that such an amorphous composition is prepared and investigated. The tendency toward re-crystallization of the amorphous ezetimibe⁻simvastatin system, at both standard storage and elevated temperature conditions, have been studied by means of X-ray diffraction (XRD). Our investigations have revealed that simvastatin remarkably improves the physical stability of ezetimibe, despite the fact that it works as a plasticizer. Pure amorphous ezetimibe, when stored at room temperature, begins to re-crystallize after 14 days after amorphization. On the other hand, the ezetimibe-simvastatin binary mixture (at the same storage conditions) is physically stable for at least 1 year. However, the devitrification of the binary amorphous composition was observed at elevated temperature conditions (T = 373 K). Therefore, we used a third compound to hinder the re-crystallization. Finally, both the physical stability as well as viscoelastic properties of the ternary systems containing different concentrations of the latter component have been thoroughly investigated.

Mechanistic Study of Belinostat Oral Absorption From Spray-Dried Dispersions

Spray-dried dispersions (SDDs) are an important technology for enhancing the oral bioavailability of poorly water-soluble drugs. To design an effective oral SDD formulation, the key rate-determining step(s) for oral drug absorption must be understood. This work combined in vivo and in vitro tests with in silico modeling to identify the rate-determining steps for oral absorption of belinostat SDDs made with 3 different polymers (PVP K30, PVP VA64, and HPMCAS-M). The goal was developing a belinostat SDD formulation that maximizes oral bioavailability (ideally matching the performance of a belinostat oral solution) and defining critical performance attributes for formulation optimization. The in vivo pharmacokinetic study with beagle dogs demonstrated that 1 of the 3 SDDs (PVP K30 SDD) matched the performance of the oral solution. In vitro data coupled with in silico modeling elucidated differences among the SDDs and supported the hypothesis that absorption of belinostat in the small intestine from the other 2 SDDs (PVP VA64 and HPMCAS-M) may be limited by dissolution rate or reduced drug activity (maximum concentration) in the presence of polymer. It was concluded that drug concentration in the stomach before emptying into the proximal intestine is a key factor for maximizing in vivo performance.

A New Method To Identify Physically Stable Concentration of Amorphous Solid Dispersions (I): Case of Flutamide + Kollidon VA64

In this paper, a novel approach to determine stable concentration in API-polymer systems is presented. As a model, binary amorphous mixtures flutamide (FL) drug with a copolymer Kollidon VA64 (PVP/VA) have been used. It is worthwhile to note that finding an effective method to achieve this goal is a matter of great importance because physical stability of the amorphous pharmaceuticals is the key issue that is investigated worldwide. Due to the fact that molecular dynamics was found to be the crucial factor affecting physical stability of disordered pharmaceuticals, we examined it for both neat FL and its PVP/VA mixtures by means of broadband dielectric spectroscopy (BDS). Thorough investigation of the impact of polymeric additive on the molecular mobility of disordered FL reveals unusual, previously unreported behavior. Namely, simultaneously with the beginning of the recrystallization process, we observe some transformation from unstable supersaturated concentration of investigated mixture to the different, unknown concentration of FL-PVP/VA. Observed, during BDS experiment, transformation enables us to determine the limiting, highly physically stable concentration of FL in PVP/VA polymer (saturated solution), which is equivalent to FL + 41% wt. of PVP/VA. The described high physical stability of this unveiled system has been confirmed by means of long-term XRD measurements. According to our knowledge, this is the first time when such a behavior has been observed by means of BDS.

Atorvastatin as a Promising Crystallization Inhibitor of Amorphous Probucol: Dielectric Studies at Ambient and Elevated Pressure

The aim of this article was to check the physical stability of the amorphous form of probucol at both standard storage and manufacturing conditions. Our studies clearly show that disordered form of the examined, cholesterol lowering, agent stored at ambient pressure does not reveal any tendency toward recrystallization. The physical stability of neat probucol stored at ambient pressure has been investigated (i) at room temperature by means of X-ray diffraction technique (XRD) as well as (ii) at T = 333 K by means of broadband dielectric spectroscopy (BDS). Due to the fact that compression is an important stage of drugs manufacturing we additionally performed physical stability tests of amorphous probucol at elevated pressure. The recrystallization tendency of the examined pharmaceutical has been tracked online from the initial and further up to a few hours after compression by means of the high pressure BDS technique. These experiments indicate that even very small pressure applied during the sample compression immediately induce its recrystallization. Since, the sensitivity on pressure eliminates probucol from the group of physically stable amorphous APIs, its stabilization is required. Taking into account that there are many scientific reports describing the positive effect of coadministration of probucol with the drug atorvastatin, we used the latter as probucol's crystallization inhibitor.

Molecular Dynamics, Recrystallization Behavior, and Water Solubility of the Amorphous Anticancer Agent Bicalutamide and Its Polyvinylpyrrolidone Mixtures

In this paper, we investigated the molecular mobility and physical stability of amorphous bicalutamide, a poorly water-soluble drug widely used in prostate cancer treatment. Our broadband dielectric spectroscopy measurements and differential scanning calorimetry studies revealed that amorphous BIC is a moderately fragile material with a strong tendency to recrystallize from the amorphous state. However, mixing the drug with polymer polyvinylpyrrolidone results in a substantial improvement of physical stability attributed to the antiplasticizing effect governed by the polymer additive. Furthermore, IR study demonstrated the existence of specific interactions between the drug and excipient. We found out that preparation of bicalutamide-polyvinylpyrrolidone mixture in a 2-1 weight ratio completely hinder material recrystallization. Moreover, we determined the time-scale of structural relaxation in the glassy state for investigated materials. Because molecular mobility is considered an important factor governing crystallization behavior, such information was used to approximate the long-term physical stability of an amorphous drug and drug-polymer systems upon their storage at room temperature. Moreover, we found that such systems have distinctly higher water solubility and dissolution rate in comparison to the pure amorphous form, indicating the genuine formulation potential of the proposed approach.

Molecular Relaxations in Supercooled Liquid and Glassy States of Amorphous Quinidine: Dielectric Spectroscopy and Density Functional Theory Approaches

In this article, we conduct a comprehensive molecular relaxation study of amorphous Quinidine above and below the glass-transition temperature (Tg) through broadband dielectric relaxation spectroscopy (BDS) experiments and theoretical density functional theory (DFT) calculations, as one major issue with the amorphous state of pharmaceuticals is life expectancy. These techniques enabled us to determine what kind of molecular motions are responsible, or not, for the devitrification of Quinidine. Parameters describing the complex molecular dynamics of amorphous Quinidine, such as Tg, the width of the α relaxation (βKWW), the temperature dependence of α-relaxation times (τα), the fragility index (m), and the apparent activation energy of secondary γ relaxation (Ea-γ), were characterized. Above Tg (> 60 °C), a medium degree of nonexponentiality (βKWW = 0.5) was evidenced. An intermediate value of the fragility index (m = 86) enabled us to consider Quinidine as a glass former of medium fragility. Below Tg (< 60 °C), one well-defined secondary γ relaxation, with an apparent activation energy of Ea-γ = 53.8 kJ/mol, was reported. From theoretical DFT calculations, we identified the most reactive part of Quinidine moieties through exploration of the potential energy surface. We evidenced that the clearly visible γ process has an intramolecular origin coming from the rotation of the CH(OH)C9H14N end group. An excess wing observed in amorphous Quinidine was found to be an unresolved Johari-Goldstein relaxation. These studies were supplemented by sub-Tg experimental evaluations of the life expectancy of amorphous Quinidine by X-ray powder diffraction and differential scanning calorimetry. We show that the difference between Tg and the onset temperature for crystallization, Tc, which is 30 K, is sufficiently large to avoid recrystallization of amorphous Quinidine during 16 months of storage under ambient conditions.

Molecular Dynamics and Physical Stability of Amorphous Nimesulide Drug and Its Binary Drug-Polymer Systems

In this article we study the effectiveness of three well-known polymers: inulin, Soluplus, and PVP in stabilizing the amorphous form of nimesulide (NMS) drug. The recrystallization tendency of pure drug as well as measured drug-polymer systems were examined at isothermal conditions by broadband dielectric spectroscopy (BDS) and at nonisothermal conditions by differential scanning calorimetry (DSC). Our investigation has shown that the crystallization half-life time of pure NMS at 328 K is equal to 33 min. We found that this time can be prolonged to 40 years after adding 20% w/w PVP to NMS. This polymer proved to be the best NMS stabilizer, while the worst stabilization effect was exhibited by inulin. Additionally, our DSC, BDS, and FTIR studies indicate that for suppression of NMS recrystallization in the NMS-PVP system, the two mechanisms are responsible: the polymeric steric hindrances and the antiplastization effect exerted by the excipient.

Effect of Compression on the Molecular Arrangement of Itraconazole-Soluplus Solid Dispersions: Induction of Liquid Crystals or Exacerbation of Phase Separation?

Predensification and compression are unit operations imperative to the manufacture of tablets and capsules. Such stress-inducing steps can cause destabilization of solid dispersions which can alter their molecular arrangement and ultimately affect dissolution rate and bioavailability. In this study, itraconazole-Soluplus solid dispersions with 50% (w/w) drug loading prepared by hot-melt extrusion (HME) were investigated. Compression was performed at both pharmaceutically relevant and extreme compression pressures and dwell times. The starting materials, powder, and compressed solid dispersions were analyzed using modulated differential scanning calorimetry (MDSC), X-ray diffraction (XRD), small- and wide-angle X-ray scattering (SWAXS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and broadband dielectric spectroscopy (BDS). MDSC analysis revealed that compression promotes phase separation of solid dispersions as indicated by an increase in glass transition width, occurrence of a peak in the nonreversing heat flow signal, and an increase in the net heat of fusion indicating crystallinity in the systems. SWAXS analysis ruled out the presence of mesophases. BDS measurements elucidated an increase in the Soluplus-rich regions of the solid dispersion upon compression. FTIR indicated changes in the spatiotemporal architecture of the solid dispersions mediated via disruption in hydrogen bonding and ultimately altered dynamics. These changes can have significant consequences on the final stability and performance of the solid dispersions.

Recent developments in the experimental investigations of relaxations in pharmaceuticals by dielectric techniques at ambient and elevated pressure

In recent years, there is a growing interest in improving the physicochemical stability of amorphous pharmaceutical solids due to their very promising applications to manufacture medicines characterized by a better water solubility, and consequently by a higher dissolution rate than those of their crystalline counterparts. In this review article, we show that the molecular mobility investigated both in the supercooled liquid and glassy states is the crucial factor required to understand molecular mechanisms that govern the physical stability of amorphous drugs. We demonstrate that pharmaceuticals can be thoroughly examined by means of the broadband dielectric spectroscopy, which is a very useful experimental technique to explore different relaxation processes and crystallization kinetics as well. Such studies conducted in the wide temperature and pressure ranges provide data needed in searching correlations between properties of molecular dynamics and crystallization process, which are aimed at developing effective and efficient methods for stabilizing amorphous drugs.

Stabilization of the Amorphous Ezetimibe Drug by Confining Its Dimension

The purpose of this paper is to investigate the influence of nanoconfinement on the molecular mobility, as well as on the physical stability, of amorphous ezetimibe drug. Two guest/host systems, ezetimibe-Aeroperl 300 and ezetimibe-Neusilin US2, were prepared and studied using various experimental techniques, such as X-ray diffraction (XRD), differential scanning calorimetry (DSC), and broadband dielectric spectroscopy (BDS). Our investigation has shown that the molecular mobility of the examined anticholesterol agent incorporated into nanopore matrices strongly depends on the pore size of the host system. Moreover, it was found that the amorphous ezetimibe confined in 30 nm pores of Aeroperl 300 has a tendency to recrystallize, while the drug incorporated into the smaller--5 nm--pores of Neusilin US2 is not able to crystallize. It has been shown that this significant stabilization of ezetimibe drug can be achieved by an interplay of three factors: changes in molecular dynamics of the confined amorphous drug, the immobilization effect of pore walls on a part of ezetimibe molecules, and the use of host materials with pores that are smaller than the critical size of the drug crystal nuclei.

Amorphous Protic Ionic Systems as Promising Active Pharmaceutical Ingredients: The Case of the Sumatriptan Succinate Drug

In this article, we highlight the benefits coming from the application of amorphous protic ionic systems as active pharmaceutical ingredients (APIs). Using the case of the sumatriptan (STR) drug, we show that the conversion of nonionic API to partially ionized amorphous protic succinate salt (STR SUCC) brings a substantial improvement in apparent solubility. Since in general the disordered systems reveal a tendency to self-arrangement during storage, the dominant part of this article is dedicated to the physical stability issue of sumatriptan and its ionic counterpart. To recognize the crystallization tendency of the studied systems, the calorimetric measurements were performed. Additionally, the role of ion dynamics in spontaneous nucleation of amorphous sumatriptan succinate is discussed. The differential scanning calorimetry analysis of ionic and nonionic sumatriptan reveals many similarities in thermal properties of these APIs as well as distinct differences in their resistance against crystallization in the supercooled liquid state. To determine the long-term physical stability of STR SUCC at room temperature conditions, the time scale of structural relaxation below their glass transition temperatures is estimated. We show that in contrast to nonionic materials, τα predictions of STR SUCC are much more complex and require aging experiments.

Universal Behavior of Dielectric Responses of Glass Formers: Role of Dipole-Dipole Interactions

From an exhaustive examination of the molecular dynamics in practically all van der Waals molecular glass formers ever probed by dielectric spectroscopy, we found that the width of the α-loss peak at or near the glass transition temperature T_{g} is strongly anticorrelated with the polarity of the molecule. The larger the dielectric relaxation strength Δε(T_{g}) of the system, the narrower is the α-loss peak. This remarkable property is explained by the contribution from the dipole-dipole interaction potential V_{dd}(r)=-Dr^{-6} to the attractive part of the intermolecular potential, making the resultant potential more harmonic, and the effect increases rapidly with the dipole moment μ and Δε(T_{g}) in view of the relation, D∝(μ^{4}/kT_{g})∝kT_{g}[Δε(T_{g})]^{2}. Since the novel correlation discovered encompasses practically all van der Waals molecular glass formers studied by dielectric spectroscopy, it impacts the large dielectric research community as well as those engaged in solving the glass transition problem.

Molecular Dynamics and Physical Stability of Coamorphous Ezetimib and Indapamide Mixtures

Low physical stability is the main reason limiting the widespread use of amorphous pharmaceuticals. One approach to overcome this problem is to mix these drugs with various excipients. In this study coamorphous drug-drug compositions of different molar ratios of ezetimib and indapamid (i.e., EZB 10:1 IDP, EZB 5:1 IDP, EZB 2:1 IDP, EZB 1:1 IDP and EZB 1:2 IDP) were prepared and investigated using differential scanning calorimetry (DSC), broadband dielectric spectroscopy (BDS), and X-ray diffraction (XRD). Our studies have shown that the easily recrystallizing ezetimib drug can be significantly stabilized in its amorphous form by using even a small amount of indapamid (8.8 wt %). DSC experiments indicate that the glass transition temperature (Tg) of the tested mixtures changes with the drug concentration in accordance with the Gordon-Taylor equation. We also investigated the effect of indapamid on the molecular dynamics of the ezetimib. As a result it was found that, with increasing indapamid content, the molecular mobility of the binary drug-drug system is slowed down. Finally, using the XRD technique we examined the long-term physical stability of the investigated binary systems stored at room temperature. These measurements prove that low-molecular-weight compounds are able to significantly improve the physical stability of amorphous APIs.

Recent progress on dielectric properties of protic ionic liquids

Protic ionic liquids (PILs) are key materials for a wide range of emerging technologies. In particular, these systems have long been envisioned as promising candidates for fuel cells. Therefore, in recent years special attention has been devoted to thorough studies of these compounds. Amongst others, dielectric properties of PILs at ambient and elevated pressure have become the subject of intense research. The reason for this lies in the role of broadband dielectric spectroscopy in recognizing the conductivity mechanism in protic ionic systems. In this paper, we summarize the dielectric results of various PILs reflecting recent advances in this field.