PEG-Polypeptide Dual Brush Block Copolymers: Synthesis and Application in Nanoparticle Surface PEGylation

The biological response of pH-switch-based gold nanoparticle-composite polyamino acid embolic material

With continuous advances in medical technology, non-invasive embolization has emerged as a minimally invasive treatment, offering new possibilities in cancer therapy. Fluorescent labeling can achieve visualization of therapeutic agents in vivo, providing technical support for precise treatment. This paper introduces a novel in situ non-invasive embolization composite material, Au NPs@(mPEG-PLGTs), created through the electrostatic combination of L-cysteine-modified gold nanoparticles (Au NPs) and methoxy polyethylene glycol amine-poly[(L-glutamic acid)-(L-tyrosine)] (mPEG-PLGTs). Experiments were undertaken to confirm the biocompatibility, degradability, stability and performance of this tumor therapy. The research results demonstrated a reduction in tumor size as early as the fifth day after the initial injection, with a significant 90% shrinkage in tumor volume observed after a 20-day treatment cycle, successfully inhibiting tumor growth and exhibiting excellent anti-tumor effects. Utilizing near-infrared in vivo imaging, Au NPs@(mPEG-PLGTs) displayed effective fluorescence tracking within the bodies of nude BALB-c mice. This study provides a novel direction for the further development and innovation of in situ non-invasive embolization in the field, highlighting its potential for rapid, significant therapeutic effects with minimal invasiveness and enhanced safety.

Location of a Hydrophobic Load in Poly(oligo(ethylene glycol) methyl ether methacrylate)s (PEGMAs) Dissolved in Water and Probed by Fluorescence

Two series of pyrene-labeled poly(oligo(ethylene glycol) methyl ether methacrylate)s referred to as PyEG5-PEGnMA and PyC4-PEGnMA were prepared to probe the region surrounding the polymethacrylate backbone by using the fluorescence of the dye pyrene. PyEG5-PEGnMA and PyC4-PEGnMA were prepared by copolymerizing the EGnMA methacrylate monomers with penta(ethylene glycol) 1-pyrenemethyl ether methacrylate or 1-pyrenebutyl methacrylate, respectively. In organic solvents, the much longer 18 non-hydrogen atom linker connecting the pyrene moieties to the polymethacrylate backbone in the PyEG5-PEGnMA samples enabled the deployment of the pyrenyl labels into the solution. In water, however, an excited pyrene for PyEG5-PEGnMA was found to probe a same volume as for the PyC4-PEGnMA samples where a much shorter 6 non-hydrogen atom spacer connected pyrene to the backbone. Another surprising observation, considering that the hydrophobicity of pyrene induces strong pyrene aggregation for many pyrene-labeled water-soluble polymers (Py-WSPs) in water, was the little pyrene aggregation found for the PyEG5-PEGnMA and PyC4-PEGnMA samples in water. These effects could be related to the organic-like domain (OLD) generated by the oligo(ethylene glycol) side chains densely arranged around the polymethacrylate backbone of the polymeric bottlebrush (PBB). Additional fluorescence experiments conducted with the penta(ethylene glycol) 1-pyrenemethyl ether derivative indicated that the cylindrical OLD surrounding the polymethacrylate backbone had a chemical composition similar to that of ethylene glycol. Binding of hydrophobic pyrene molecules to unlabeled PEGnMA bottlebrushes in water further supported the existence of the OLD. The demonstration, that PEGnMA samples form an OLD in water, which can host and protect hydrophobic cargoes like pyrene, should lead to the development of improved PEGnMA-based drug delivery systems.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Effective and biocompatible antibacterial surfaces via facile synthesis and surface modification of peptide polymers

It is an urgent need to tackle drug-resistance microbial infections that are associated with implantable biomedical devices. Host defense peptide-mimicking polymers have been actively explored in recent years to fight against drug-resistant microbes. Our recent report on lithium hexamethyldisilazide-initiated superfast polymerization on amino acid N-carboxyanhydrides enables the quick synthesis of host defense peptide-mimicking peptide polymers. Here we reported a facile and cost-effective thermoplastic polyurethane (TPU) surface modification of peptide polymer (DLL: BLG = 90 : 10) using plasma surface activation and substitution reaction between thiol and bromide groups. The peptide polymer-modified TPU surfaces exhibited board-spectrum antibacterial property as well as effective contact-killing ability in vitro. Furthermore, the peptide polymer-modified TPU surfaces showed excellent biocompatibility, displaying no hemolysis and cytotoxicity. In vivo study using methicillin-resistant Staphylococcus aureus (MRSA) for subcutaneous implantation infectious model showed that peptide polymer-modified TPU surfaces revealed obvious suppression of infection and great histocompatibility, compared to bare TPU surfaces. We further explored the antimicrobial mechanism of the peptide polymer-modified TPU surfaces, which revealed a surface contact-killing mechanism by disrupting the bacterial membrane. These results demonstrated great potential of the peptide-modified TPU surfaces for practical application to combat bacterial infections that are associated with implantable materials and devices.

•

A convenient surface modification of peptide polymer 90 : 10 DLL : BLG to enable material surfaces antibacterial properties.

•

The modified thermoplastic polyurethane (TPU) surfaces show board-spectrum antibacterial performance and excellent biocompatibility both in vitro and in vivo.

•

The contact-killing surfaces demonstrate great potential for practical application to combat bacterial infections associated with implantable materials and devices.

Supramolecular behaviour and fluorescence of rhodamine-functionalised ROMP polymers

A ROMP platform leading to rhodamine B containing amphiphilic block copolymers, which self-assemble into micelles which are able to sequester molecular dyes and interact with them by energy transfer. The polymer micelles do not interact with DNA.

Grubbs' and Schrock's Catalysts, Ring Opening Metathesis Polymerization and Molecular Brushes-Synthesis, Characterization, Properties and Applications

In this review, molecular brushes and other macromolecular architectures bearing a bottlebrush segment where the main chain is synthesized by ring opening metathesis polymerization (ROMP) mediated by Mo or Ru metal complexes are considered. A brief review of metathesis and ROMP is presented in order to understand the problems and the solutions provided through the years. The synthetic strategies towards bottlebrush copolymers are demonstrated and each one discussed separately. The initiators/catalysts for the synthesis of the backbone with ROMP are discussed. Syntheses of molecular brushes are presented. The most interesting properties of the bottlebrushes are detailed. Finally, the applications studied by different groups are presented.

Design of hybrid molecular brushes with reversible surface adaptability on exposure to specific solvents

Hybrid molecular brushes (HMBs) are macromolecules made of a linear backbone and polymeric side chains that differ in their chemical nature. The authors developed a new method of synthesis of HMB with chitosan (CHI) backbone. In the first step, chitosan-graft-polylactide (CHI-g-PLA) was synthesized by interfacial ring opening polymerization of lactide initiated from CHI. CHI-g-PLA is characterized for its molecular weight and structure. In the second step, polyvinylpyrrolidone (PNVP) or polyacrylamide (PAAm) is grafted by radical polymerization from the CHI in CHI-g-PLA to form CHI-g-PLA-g-PNVP and CHI-g-PLA-g-PAAm. This results in the formation of HMB, with hydrophobic PLA and hydrophilic PNVP or PAAm side chains grafted to CHI. The chemical structure and thermal behavior of the HMBs are characterized. The morphology of CHI-g-PLA as well as the HMBs is determined using atomic force microscopy (AFM). Both the HMBs tethered to separate surfaces exhibit reversible switching between the hydrophilic and hydrophobic polymers on exposure to specific solvents. This is studied by AFM and water contact angle measurements. Hence, the authors developed a method for synthesis of HMB that can be applied for surface modification.

Two-Dimensional Controlled Syntheses of Polypeptide Molecular Brushes via N-Carboxyanhydride Ring-Opening Polymerization and Ring-Opening Metathesis Polymerization

Well-defined molecular brushes bearing polypeptides as side chains were prepared by a "grafting through" synthetic strategy with two-dimensional control over the brush molecular architectures. By integrating N-carboxyanhydride ring-opening polymerizations (NCA ROPs) and ring-opening metathesis polymerizations (ROMPs), desirable segment lengths of polypeptide side chains and polynorbornene brush backbones were independently constructed in controlled manners. The N2 flow accelerated NCA ROP was utilized to prepare polypeptide macromonomers with different lengths initiated from a norbornene-based primary amine, and those macromonomers were then polymerized via ROMP. It was found that a mixture of dichloromethane and an ionic liquid were required as the solvent system to allow for construction of molecular brush polymers having densely-grafted peptide chains emanating from a polynorbornene backbone, poly(norbornene-graft-poly(β-benzyl-l-aspartate)) (P(NB-g-PBLA)). Highly efficient postpolymerization modification was achieved by aminolysis of PBLA side chains for facile installment of functional moieties onto the molecular brushes.

Bifunctional Chelating Supramolecular Polymer and Its Application in Downregulation of Cellular Iron Uptake

A bifunctional chelating supramolecular polymer (SP-Ch) is constructed from a brush-like macromolecule (P-Ch) through hydrogen bonds. Two kinds of norbornene derivatives are used to synthesize P-Ch in which phosphonic acid as a side-group of polynorbornene can act as a chelating group and ascorbic acid as a side-chain capper of polynorbornene can reduce Fe³⁺ to Fe²⁺. It can attach to cell membranes and form two kinds of "barriers" to hinder cells from iron uptake by virtue of phosphonic acid and ascorbic acid. Higher monomer conversion and polymerization degree of P-Ch are achieved when the ratio among M₁, M₂, and G₂ is set as 50:10:1 and SP-Ch particles reach to submicrometer levels (mean size of 147.5 nm). The best chelating and reducing capacities of SP-Ch for Fe³⁺ are 0.034 and 0.047 mg/mg, respectively. After being treated with SP-Ch, the amount of iron in MCF-7 cells is reduced from 3.376 to 1.784 ng/10⁵ cells after 48 h, which confirms that the cellular iron uptake is downregulated. As a result, iron deprivation induces growth inhibition of MCF-7 cells.

A versatile platform for precise synthesis of asymmetric molecular brush in one shot

Asymmetric molecular brushes emerge as a unique class of nanostructured polymers, while their versatile synthesis keeps a challenge for chemists. Here we show the synthesis of well-defined asymmetric molecular double-brushes comprising two different side chains linked to the same repeat unit along the backbone by one-pot concurrent atom transfer radical polymerization (ATRP) and Cu-catalyzed azide/alkyne cycloaddition (CuAAC) reaction. The double-brushes are based on a poly(Br-acrylate-alkyne) homopolymer possessing an alkynyl for CuAAC reaction and a 2-bromopropionate initiating group for ATRP in each repeat unit. The versatility of this one-shot approach is demonstrated by CuAAC reaction of alkynyl/poly(ethylene oxide)-N3 and ATRP of various monomers. We also show the quantitative conversion of pentafluorophenyl ester groups to amide groups in side chains, allowing for the further fabrication of diverse building blocks. This work provides a versatile platform for facile synthesis of Janus-type double-brushes with structural and functional control, in a minimum number of reactions.Producing well-defined polymer compositions and structures facilitates their use in many different applications. Here the authors show the synthesis of well-defined asymmetric double-brushes by a one-pot concurrent atom transfer radical polymerization and Cu-catalyzed Click reaction.

Multi-POSS cluster-wrapped polymers and their block copolymers with a PEO bottlebrush polymer: synthesis and aggregation

In this paper, we report an approach for synthesizing multicluster-wrapped polymers and their block copolymers with a bottlebrush polymer with controlled chain length and composition via living ring-opening metathesis polymerization.

Construction of catechol-containing semi-fluorinated asymmetric polymer brush via successive RAFT polymerization and ATRP

This article reports the synthesis of a semi-fluorinated compositional heterogeneous polymer brush for anti-fouling surface.

Nanoformulation and encapsulation approaches for poorly water-soluble drug nanoparticles

During the last few decades the nanomedicine sector has emerged as a feasible and effective solution to the problems faced by the high percentage of poorly water-soluble drugs. Decreasing the size of such drug compounds to the nanoscale can significantly change their physical properties, which lays the foundation for the use of nanomedicine for pharmaceutical applications. Various techniques have been developed to produce poorly water-soluble drug nanoparticles, mainly to address the poor water-soluble issues but also for the efficient and targeted delivery of such drugs. These techniques can be generally categorized into top-down, bottom-up and encapsulation approaches. Among them, the top-down approaches have been the main choice for industrial preparation of drug nanoparticles while other methods are actively investigated by researchers. In this review, we aim to give a comprehensive overview and latest progress of the top-down, bottom-up, and encapsulation methods for the preparation of poorly water-soluble drug nanoparticles and how solvents and additives can be selected for these methods. In addition to the more industrially applied top-down approaches, the review is focused more on bottom-up and encapsulation methods, particularly covering supercritical fluid-related methods, cryogenic techniques, and encapsulation with dendrimers and responsive block copolymers. Some of the approved and mostly used nanodrug formulations on the market are also covered to demonstrate the applications of poorly water-soluble drug nanoparticles. This review is complete with perspectives on the development and challenges of fabrication techniques for more effective nanomedicine.

Synthesis and self-assembly of a dual thermal and pH-responsive ternary graft copolymer for sustained release drug delivery

Schematic illustrations of the self-assembly of TGCs and possible loading and release mechanism.

Providing Oligonucleotides with Steric Selectivity by Brush-Polymer-Assisted Compaction

Difficult biopharmaceutical characteristics of oligonucleotides, such as poor enzymatic stability, rapid clearance by reticuloendothelial organs, immunostimulation, and coagulopathies, limit their application as therapeutics. Many of these side effects are initiated via sequence-specific or nonsequence-specific interactions with proteins. Herein, we report a novel form of brush-polymer/DNA conjugate that provides the DNA with nanoscale steric selectivity: Hybridization kinetics with complementary DNA remains nearly unaffected, but interactions with proteins are significantly retarded. The relative lengths of the brush side chain and the DNA strand are found to play a critical role in the degree of selectivity. Being able to evade protein adhesion also improves in vivo biodistribution, thus making these molecular nanostructures promising materials for oligonucleotide-based therapies.

Polymeric Micelle-Mediated Delivery of DNA-Targeting Organometallic Complexes for Resistant Ovarian Cancer Treatment

Three half-sandwich iridium and ruthenium organometallic complexes with high cytotoxicity are synthesized, and their anticancer mechanisms are elucidated. The organometallic complexes can interact with DNA through coordination or intercalation, thereby inducing apoptosis and inhibiting proliferation of resistant cancer cells. The organometallic complexes are then incorporated into polymeric micelles through the polymer-metal coordination between poly(ethylene glycol)-b-poly(glutamic acid) [PEG-b-P(Glu)] and organometallic complexes to further enhance their anticancer effects as a result of the enhanced permeability and retention effect. The micelles with particle sizes of ≈60 nm are more efficiently internalized by cancer cells than the corresponding complexes, and selectively dissociate and release organometallic anticancer agents within late endosomes and lysosomes, thereby enhancing drug delivery to the nuclei of cancer cells and facilitating their interactions with DNA. Thus, the micelles display higher antitumor activity than the organometallic complexes alone with a lack of the systemic toxicity in a mouse xenograft model of cisplatin-resistant human ovarian cancer. These results suggest that the polymeric micelles carrying anticancer organometallic complexes provide a promising platform for the treatment of resistant ovarian cancer and other hard-to-treat solid tumors.

Synthesis and self-assembly of well-defined binary graft copolymer and its use in superhydrophobic cotton fabrics preparation

Schematic illustrations of the self-assembly of BGCs and photographs of superhydrophobic performance.

Ultrastable core–shell structured nanoparticles directly made from zwitterionic polymers

A one-step method to create ultra-stable core–shell nanoparticles directly from zwitterionic polymers.