Molecular Weight Dependence of Zero-Shear Viscosity in Atactic Polypropylene Bottlebrush Polymers

Opportunities in Bottlebrush Block Copolymers for Advanced Materials

Bottlebrush block copolymers (BBCPs) are a unique class of materials that contain a backbone with densely grafted and chemically distinct polymeric side chains. The nonlinear architecture of BBCPs provides numerous degrees of freedom in their preparation, including control over key parameters such as grafting density, side chain length, block arrangement, and overall molecular weight. This uniquely branched structure provides BBCPs with several important distinctions from their linear counterparts, including sterically induced side chain and backbone conformations, rapid and large self-assembled nanostructures, and reduced or eliminated entanglement effects (assuming sufficient grafting density and that the molecular weight of the side chains is below their respective entanglement molecular weight). These distinctions allow access to large domain sizes, very rapid assembly, and the ability to preferentially add additives and/or precursors to one domain, thereby enabling the efficient fabrication of a wide range of advanced materials and devices. BBCPs have been utilized to create finely controlled and well-ordered nanostructures for use in applications, such as photonic crystals, drug delivery systems, energy conversion, energy storage devices, and key components in surface coatings. To further deploy BBCPs as templates for the formation of precise nanostructures, having a thorough understanding of their synthesis, self-assembly, and templating is necessary. To explore and understand the self-assembly and subsequent applications of BBCPs, this review emphasizes the physics of self-assembly for BBCPs (including architectural, rheological, and thermodynamic considerations) and structure-property relationships between BBCPs and their resulting nanostructures. Lastly, we provide an overview of current research trends using BBCPs in energy storage, energy conversion, photonic, 3D printing, and drug delivery applications. We aim to provide researchers with the fundamentals of BBCP self-assembly in their use as nanostructured materials to continue their development of advanced materials.

Comparison of Polypentenamer and Polynorbornene Bottlebrushes in Dilute Solution

Bottlebrush (BB) polymers were synthesized via grafting-from-atom transfer radical polymerization (ATRP) of styrene on polypentenamer and polynorbornene macroinitiators with matched grafting density (n g = 4) and backbone degrees of polymerization (122 ≥ N bb ≥ 61) to produce a comparative study on their respective dilute solution properties as a function of increasing side chain degree of polymerization (116 ≥ N sc ≥ 5). The grafting-from technique produced near quantitative grafting efficiency and narrow dispersity N sc as evidenced by spectroscopic analysis and ring closing metathesis depolymerization of the polypentenamer BBs. The versatility of this synthetic approach permitted a comprehensive survey of power law expressions that arise from monitoring intrinsic viscosity, hydrodynamic radius, and radius of gyration as a function of increasing the molar mass of the BBs by increasing N sc. These values were compared to a series of linear (nongrafted, N sc = 0) macroinitiators in addition to linear grafts. This unique study allowed elucidation of the onset of bottlebrush behavior for two different types of bottlebrush backbones with identical grafting density but inherently different flexibility. In addition, grafting-from ATRP of methyl acrylate on a polypentenamer macroinitiator allowed the observation of the effects of graft chemistry in comparison to polystyrene. Differences in the observed scaling relationships in dilute solution as a function of each of these synthetic variants are discussed.

Brownian dynamics simulations of bottlebrush polymers in dilute solution under simple shear and uniaxial extensional flows

We study the dynamics of bottlebrush polymer molecules in dilute solutions subjected to shear and uniaxial extensional flows using Brownian dynamics simulations with hydrodynamic interaction (HI). Bottlebrush polymers are modeled using a coarse-grained representation, consisting of a set of beads interacting pairwise via a purely repulsive potential and connected by finitely extensible nonlinear springs. We present the results for molecular stretching, stress, and solution viscosity during the startup of flow as well as under steady state as a function of side chain length while keeping the backbone length fixed. In extensional flow, the backbone fractional extension and the first normal stress difference decrease with an increase in side chain length at a fixed Weissenberg number (Wi). Using simulation results both in the presence of and in the absence of HI, we show that this is primarily a consequence of steric interaction resulting from the dense grafting of side chains. In shear flow, we observe a shear-thinning behavior in all cases, although it becomes less pronounced with increasing side chain length. Furthermore, nonmonotonicity in the backbone fractional extension is observed under shear, particularly at high Wi. We contextualize our simulation results for bottlebrush polymers with respect to existing studies in the literature for linear polymers and show that the unique dynamical features characterizing bottlebrush polymers arise on account of their additional molecular thickness due to the presence of densely grafted side chains.

Visualizing the Orientation of Single Polymers Induced by Spin-Coating

The orientation of chains within polymeric materials influences their electrical, mechanical, and thermal properties. While many techniques can infer the orientation distribution of a bulk ensemble, it is challenging to determine this information at the single-chain level, particularly in an environment of otherwise identical polymers. Here, we use single-molecule localization microscopy (SMLM) to visualize the directions of chains within spin-coated polymer films. We find a strong relationship between shear force and the degree and direction of orientation, and additionally, we reveal the effects of chain length and solvent evaporation rate. This work utilizes single-chain resolution to observe the important, though often overlooked, property of chain orientation in the common fabrication process of spin-coating.

Polysaccharides to combat viruses (Covid-19) and microbes: New updates

COVID-19, which is speedily distributed across the world and presents a significant challenge to public health, is caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Following MERS coronavirus (MERS-CoV) and SARS, this is the third severe coronavirus outbreak in less than 20 years. To date, there are no exact agents and vaccines available for the treatment of COVID-19 that are clinically successful. Antimicrobial medications are effective in controlling infectious diseases. However, the extensive use of antibiotics makes microbes more resistant to drugs and demands novel bioactive agents' development. Polysaccharides are currently commonly used in the biomedical and pharmaceutical industries for their remarkable applications. Polysaccharides appear to have a wide range of anti-virus (anti-coronavirus) and antimicrobial applications. Polysaccharides are able to induce bacterial cell membrane disruption as they demonstrate potency in binding onto the surfaces of microbial cells. Here, the antiviral mechanisms of such polysaccharides and their success in the application of antiviral infections are reviewed. Additionally, this report provides a summary of current advancements of well-recognized polysaccharides as antimicrobial and anti-biofilm agents.

Dynamics of bottlebrush polymers

Bottlebrushes are an interesting class of polymers which shows intriguing material properties often associated with dynamics. While dynamical phenomena in linear polymers are well understood and existing theories can describe them in a good way, bottlebrush dynamics have only rarely been investigated. Therefore, we performed dielectric spectroscopy and quasi-elastic neutron scattering to study the dynamics of polydimethylsiloxane-based bottlebrush polymers, PDMS-g-PDMS focusing mostly on the segmental dynamics of the side chains. Comparing the relaxation times of the α – relaxation, tracked with dielectric spectroscopy, of bottlebrush polymers with those of their respective linear side chains show a slowing down once the side chains are attached to the backbone. This effect diminishes and finally vanishes with increasing side chain length. The time and length scale, offered by quasi-elastic neutron scattering, fits for the segmental dynamics together with faster processes. The Q-dependence of the segmental relaxation times allows to classify bottlebrush polymers as heterogenous including a non-Gaussian character. For such a dynamical system, the mean square displacement needs to be separated into single processes before an overall mean square displacement can be generated by applying the time temperature superposition principle.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Solution photo-copolymerization of acrylic acid and itaconic acid: The effect of polymerization parameters on mechanical properties of glass ionomer cements

OBJECTIVE

To synthesize a series of poly (acrylic acid-co-itaconic acid) (P(AA-co-IA)) copolymers with different molecular weights (MWs) through a facile water-based solution photopolymerization and to investigate the operational and mechanical properties of the experimental glass-ionomer (GI) cements made of the ionomers.

METHODS

Thioglycolic acid (TGA) was used as a chain transfer agent to synthesize P(AA-co-IA) ionomers with different MWs through the solution photopolymerization. The chemical structure, MWs, and rheological properties of the copolymers were fully characterized. The GI cements were prepared using the ionomer solutions in different MWs and concentrations. Finally, the operating and mechanical properties of the experimental GI cements were investigated and compared with those of a commercially available GI cement.

RESULTS

The synthesis and composition of the P(AA-co-IA) were approved by spectroscopy analyses. The results revealed that by increasing the TGA content, MW and polydispersity index (PDI) of the synthesized copolymers demonstrate a decreasing trend from 4.5 × 104 g/mol (PDI of 2.45) to 7.4 × 103 g/mol (PDI of 1.62). Accordingly, the viscosity of copolymers decreased with increasing the TGA concentration in the polymerization recipes. Setting times of the cements increased with reducing the MWs and ionomer concentration. The compressive and flexural strengths of GI cements were improved by increasing the MWs, ionomers concentration, and storage time.

SIGNIFICANCE

The solution photopolymerization provides a facile and environmentally safe method to synthesize P(AA-co-IA) copolymers with controlled MWs. The structure-property relationships presented in the study also provide valuable information in the production and improvement of the GI cements.

Light-Mediated Synthesis and Reprocessing of Dynamic Bottlebrush Elastomers under Ambient Conditions

We introduce a novel grafting-through polymerization strategy to synthesize dynamic bottlebrush polymers and elastomers in one step using light to construct a disulfide-containing backbone. The key starting material-α-lipoic acid (LA)-is commercially available, inexpensive, and biocompatible. When installed on the chain end(s) of poly(dimethylsiloxane) (PDMS), the cyclic disulfide unit derived from LA polymerizes under ultraviolet (UV) light in ambient conditions. Significantly, no additives such as initiator, solvent, or catalyst are required for efficient gelation. Formulations that include bis-LA-functionalized cross-linker yield bottlebrush elastomers with high gel fractions (83-98%) and tunable, supersoft shear moduli in the ∼20-200 kPa range. An added advantage of these materials is the dynamic disulfide bonds along each bottlebrush backbone, which allow for light-mediated self-healing and on-demand chemical degradation. These results highlight the potential of simple and scalable synthetic routes to generate unique bottlebrush polymers and elastomers based on PDMS.

Dynamical Comparison of Different Polymer Architectures-Bottlebrush vs Linear Polymer

Different polymer architectures behave differently regarding their dynamics. We have used a combination of dielectric spectroscopy, and fast field cycling nuclear magnetic resonance (NMR) to compare the dynamical behavior of two different polymer architectures, with similar overall molecular weight. The systems of interest are a bottlebrush polymer and a linear one, both based on poly(dimethylsiloxane) (PDMS). To verify the structure of the PDMS-g-PDMS bottlebrush in the melt, small-angle neutron scattering was used, yielding a spherical shape. Information about the segmental dynamics was revealed by dielectric spectroscopy and extended to higher temperatures by fast field cycling NMR. One advantage of fast field cycling NMR is the detection of large-scale chain dynamics, which dielectric spectroscopy cannot probe for PDMS. While segmental relaxation seems to be independent of the architecture, the large-scale chain dynamics show substantial differences, as represented by the mean square displacement. Here, two regions are detected for each polymer. The linear polymer shows the Rouse regime, followed by reptation. In contrast, the bottlebrush polymer performs Rouse dynamics and diffusion in the available time window, and entanglement effects are completely missing.

Effect of Molecular Architecture on the Self-Assembly of Bottlebrush Copolymers

The characteristics of a new architecture of bottlebrush copolymers (BBCPs) self-assembly were studied using self-consistent field theory. In this molecule, a series of AB linear diblock side chains were connected at the diblock junction using a C backbone. The control over the linker length and its chemical nature created an additional constraint on the intrinsic AB diblock microphase separation. Increasing side-chain crowding by increasing the grafting density and total degree of polymerization induced improved phase separation. This was reflected in the overall reduction in the effective interaction parameter between the diblocks as well as the abrupt increase in phase density when crossing the order-disorder transition. Side-chain crowding resulted in an increase in the equilibrium domain spacing compared to a linear diblock. On the other hand, the localization of block C at the AB interface generated a diffuse domain boundary and reduction in side-chain stretching. The unique behavior of BBCPs was observed in 1D confined systems where the molecule showed the natural tendency to orient domains parallel to neutral confinement in contrast to the behavior of confined diblocks. Such behavior largely depended on the degree of incompatibility between the AB blocks and BBCP structure. A ternary phase diagram was constructed for different proportions of each block. Rich morphologies of core-shell domains and tiling patterns were observed including octagonal and pentagonal polygons. The unique architecture of this bottlebrush molecule and its improved nanoscale properties make it an attractive candidate for various applications of nanotechnology.

Design of nearly perfect hyperuniform polymeric materials

Disordered hyperuniform materials are exotic amorphous systems that simultaneously exhibit anomalous suppression of long-range density fluctuations, comparable in amplitude to that of crystals and quasi-crystalline materials, while lacking the translational order characteristic of simple liquids. We establish a framework to quantitatively predict the emergence of hyperuniformity in polymeric materials by considering the distribution of localized polymer subregions, instead of considering the whole material. We demonstrate that this highly tunable approach results in arbitrarily small long-range density fluctuations in the liquid state. Our simulations also indicate that long-ranged density fluctuation of the whole polymeric material is remarkably insensitive to molecular topology (linear chain, unknotted ring, star, and bottlebrush) and depends on temperature in an apparently near universal fashion. Our findings open the way for the creation of nearly perfect hyperuniform polymeric materials.

Color, structure, and rheology of a diblock bottlebrush copolymer solution

A structure-property-process relation is established for a diblock bottlebrush copolymer solution, through a combination of rheo-neutron scattering, imaging, and rheological measurements. Polylactic acid-b-polystyrene diblock bottlebrush copolymers were dispersed in toluene with a concentration of 175 mg ml-1, where they self-assembled into a lamellar phase. All measurements were carried out at 5 °C. The solution color, as observed in reflection, is shown to be a function of the shear rate. Under equilibrium and near-equilibrium conditions, the solution has a green color. At low shear rates the solution remains green, while at intermediate rates the solution is cyan. At the highest rates applied the solution is indigo. The lamellar spacing is shown to be a decreasing function of shear rate, partially accounting for the color change. The lamellae are oriented 'face-on' with the wall under quiescence and low shear rates, while a switch to 'edge-on' is observed at the highest shear rates, where the reflected color disappears. The intramolecular distance between bottlebrush polymers does not change with shear rate, although at high shear rates, the bottlebrush polymers are preferentially aligned in the vorticity direction within the lamellae. We therefore form a consistent relation between structure and function, spanning a wide range of length scales and shear rates.

Jones R, Lou J, Xia Y. Systematic investigation of synthetic polyelectrolyte bottlebrush solutions by neutron and dynamic light scattering, osmometry, and molecular dynamics simulation

There is a great interest in the synthesis and characterization of polyelectrolytes that mimic naturally occurring bottlebrush polyelectrolytes to capitalize on the unique properties of this class of macromolecules. Charged bottlebrush polymers form the protective mucus layer in the lungs, stomach, and orifices of animals and provide osmotic stabilization and lubrication to joints. In the present work, we systematically investigate bottlebrush poly(sodium acrylates) through a combination of measurements of solution properties (osmometry, small-angle neutron scattering, and dynamic light scattering) and molecular dynamics simulations, where the bottlebrush properties are compared in each case to their linear polymer counterparts. These complementary experimental and computational methods probe vastly different length- and timescales, allowing for a comprehensive characterization of the supermolecular structure and dynamics of synthetic polyelectrolyte bottlebrush molecules in solution.

Evolution of Single Chain Conformation for Model Comb-Like Chains with Grafting Density Ranging from 0 to ∼100% in Dilute Solution

This work aims to experimentally clarify how the single chain conformation evolves as a function of grafting density for model comb-like chains in dilute solution in the whole density regime. Via a combination of rational design, precise synthesis and accurate characterization, we obtained four sets of PPA_Nb-g-PS₃₀-σ comb-like samples with well-defined architectures and accurately extracted their molecular parameters by triple detection size exclusion chromatography (TD-SEC). With these samples in hand, we quantified how the excluded volume interaction and chain conformation evolve with the grafting density (σ) in the whole density regime. Three main findings are reported: (i) the graft-graft excluded volume interaction is not ignorable even in the low σ-regime; (ii) contrary to theoretical predictions, both the excluded volume interaction and the chain conformation are found to be N_b-dependent; (iii) both R_g ∼ σ^1/3 and [η] ∼ σ⁰ are experimentally confirmed for comb-like chains from different σ and N_b, signifying a unique 3D mass-size growth pattern and a quasi-3D fractal feature. The obtained results help clarify some long-existed controversial issues in the field.

Strain shifts under stress-controlled oscillatory shearing in theoretical, experimental, and structural perspectives: Application to probing zero-shear viscosity

Rheological measurements in which the applied stress or strain is oscillated are widely used to interrogate viscoelastic properties due to the independent control over the time scale and length scale afforded by changes in amplitude and frequency. Taking a nontraditional approach, we treat stress-controlled oscillatory tests as creep tests with transiently varying stress and apply an analysis typically used for steady creep and recovery experiments. Defining zero strain as the state prior to external shearing, it is shown that strain responses to small-amplitude oscillatory stressing are naturally shifted from the starting point by an amount proportional to the phase of the applied stress. The phenomenology is experimentally observed with entangled polymerlike micelles and polyethylene oxide solutions. A theory of strain shifting in the steady alternating state is provided based on recovery rheology, where differences between total strain and recoverable strains are acknowledged. User-controlled variables, such as the amplitude of the stress, the angular frequency, and the phase of the stress, as well a lone material parameter, the zero-shear viscosity, are shown to dictate the amount of shifting. A rapid and efficient approach of determining the zero-shear viscosity is, therefore, presented. We investigate the microstructural evolution via in situ small-angle neutron scattering when strain shifting appears. The microscopic orientation is shown to correlate to the recoverable strain independent of the shifting. Additional measurements are carried out on collagen, pluronic-hyaluronic acid, alginate gels, and polystyrene melts to show the generic nature of the strain shift phenomenon. In addition, we demonstrate that the strain-shift knowledge can be applied to determine the horizontal shift factor in time-temperature superposition, free of any numerical fitting procedures.

A Simple Preparation Route for Bio-Phenol MQ Silicone Resin via the Hydrosilylation Method and its Autonomic Antibacterial Property

MQ silicone resins represent a broad range of hydrolytic condensation products of monofunctional silane (M units) and tetrafunctional silane (Q units). In this work, a Bio-Phenol MQ silicone resin (BPMQ) was designed and synthesized by the hydrosilylation of hydrogen containing MQ silicone resin and eugenol in the presence of chloroplatinic acid. The structure, thermal property, and antibacterial property against Escherichia coli of the modified MQ silicone resin were investigated. The results showed that BPMQ has been prepared successfully, and the thermal stability of this modified polymer improved significantly because of the introduction of phenyl in eugenol. The temperature at the maximum degradation rate increased from 250 °C to 422.5 °C, and the residual yields mass left at 600 °C were increased from 2.0% to 28.3%. In addition, its antibacterial property against Escherichia coli was also enhanced markedly without adding any other antimicrobial agents. This improved performance is ascribed to special functional groups in the structure of eugenol. The BPMQ polymer is expected to be applied to pressure-sensitive adhesives and silicone rubber products for the biomedical field due to its reinforcing effect and antioxidant quality.

Comb and Bottlebrush Polymers with Superior Rheological and Mechanical Properties

Comb and bottlebrush polymers present a wide range of rheological and mechanical properties that can be controlled through their molecular characteristics, such as the backbone and side chain lengths as well as the number of branches per molecule or the grafting density. This review investigates the impact of these characteristics specifically on the zero shear viscosity, strain hardening behavior, and plateau shear modulus. It is shown that for a comb polymer with an entangled backbone and entangled side chains, a maximum in the strain hardening factor and minimum in the zero shear viscosity η₀ can be achieved through selection of an optimum number of branches q. Bottlebrush polymers with flexible filaments and extremely low plateau shear moduli relative to linear polymers open the door for a new class of solvent-free supersoft elastomers, where their network modulus can be controlled through both the degree of polymerization between crosslinks, n_x , and the length of the side chains, n_sc , with G B B 0 ≈ ρ k T n x - 1 ( n s c + 1 ) - 1 .

Dilute solution structure of bottlebrush polymers

Bottlebrush polymers are a class of macromolecules that have recently found use in a wide variety of materials, ranging from lubricating brushes and nanostructured coatings to elastomeric gels that exhibit structural colors. These polymers are characterized by dense branches extending from a central backbone and thus have properties distinct from linear polymers. It remains a challenge to specifically understand conformational properties of these molecules, due to the wide range of architectural parameters that can be present in a system, and thus there is a need to accurately characterize and model these molecules. In this paper, we use a combination of viscometry, light scattering, and computer simulations to gain insight into the conformational properties of dilute solution bottlebrush polymers. We focus on a series of model bottlebrushes consisting of a poly(norbornene) (PNB) backbone with poly(lactic acid) (PLA) side chains. We demonstrate that intrinsic viscosity and hydrodynamic radius are experimental observations sensitive to molecular architecture, exhibiting distinct differences with different choices of branches and backbone lengths. Informed by the atomistic structure of this PNB-PLA system, we rationalize a coarse-grained simulation model that we evaluate using a combination of Brownian dynamics and Monte Carlo simulations. We show that this exhibits quantitative matching to experimental results, enabling us to characterize the overall shape of the bottlebrush via a number of metrics that can be extended to more general bottlebrush architectures.

Study on the Photodegradation Stability of Poly(butylene Succinate-co-butylene Adipate)/TiO2 Nanocomposites

A poly(butylene succinate-co-butylene adipate)/TiO2 (PBSA/TiO2) nanocomposite was prepared by a melt-blending process. The effect of TiO2 nanoparticles on the photodegradation behaviors of the nanocomposite was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), field-emission scanning electron microscopy (FE-SEM), rheological measurements, and mechanical tests. TEM images of the PBSA/TiO2 revealed that the TiO2 nanoparticles were well dispersed in the matrix without obvious aggregation. The FT-IR results indicated that the TiO2 nanoparticles can block high-energy ultraviolet (UV) light and reduce the degradation of the PBSA matrix. The viscosity analysis results indicated that the TiO2 nanoparticles inhibited the chain scission of PBSA matrix under irradiation. In addition, the surface of the PBSA/TiO2 films and their mechanical properties change less than that of untreated PBSA films during the photoaging process. The obtained results imply that the TiO2 nanoparticles can be considered as an efficient photodegradation-resistant additive to PBSA for reducing photodegradation.