Multiplexed parallel single transport recordings on nanopore arrays

Pore-spanning membranes as a tool to investigate lateral lipid membrane heterogeneity

Over the years, it has become more and more obvious that lipid membranes show a very complex behavior. This behavior arises in part from the large number of different kinds of lipids and proteins and how they dynamically interact with each other. In vitro studies using artificial membrane systems have shed light on the heterogeneity based on lipid-lipid interactions in multicomponent bilayer mixtures. Inspired by the raft hypothesis, the coexistence of liquid-disordered (ld) and liquid-ordered (lo) phases has drawn much attention. It was shown that ternary lipid mixtures containing low- and high-melting temperature lipids and cholesterol can phase separate into a lo phase enriched in the high-melting lipids and cholesterol and a ld phase enriched in the low-melting lipids. Depending on the model membrane system under investigation, different domain sizes, shapes, and mobilities have been found. Here, we describe how to generate phase-separated lo/ld phases in model membrane systems termed pore-spanning membranes (PSMs). These PSMs are prepared on porous silicon substrates with pore sizes in the micrometer regime. A proper functionalization of the top surface of the substrates is required to achieve the spreading of giant unilamellar vesicles (GUVs) to obtain PSMs. Starting with lo/ld phase-separated GUVs lead to membrane heterogeneities in the PSMs. Depending on the functionalization strategy of the top surface of the silicon substrate, different membrane heterogeneities are observed in the PSMs employing fluorescence microscopy. A quantitative analysis of the heterogeneity as well as the dynamics of the lipid domains is described.

Engineering Biological Nanopore Approaches toward Protein Sequencing

Biotechnological innovations have vastly improved the capacity to perform large-scale protein studies, while the methods we have for identifying and quantifying individual proteins are still inadequate to perform protein sequencing at the single-molecule level. Nanopore-inspired systems devoted to understanding how single molecules behave have been extensively developed for applications in genome sequencing. These nanopore systems are emerging as prominent tools for protein identification, detection, and analysis, suggesting realistic prospects for novel protein sequencing. This review summarizes recent advances in biological nanopore sensors toward protein sequencing, from the identification of individual amino acids to the controlled translocation of peptides and proteins, with attention focused on device and algorithm development and the delineation of molecular mechanisms with the aid of simulations. Specifically, the review aims to offer recommendations for the advancement of nanopore-based protein sequencing from an engineering perspective, highlighting the need for collaborative efforts across multiple disciplines. These efforts should include chemical conjugation, protein engineering, molecular simulation, machine-learning-assisted identification, and electronic device fabrication to enable practical implementation in real-world scenarios.

Micropatterning of functional lipid bilayer assays for quantitative bioanalysis

Interactions of the cell with its environment are mediated by the cell membrane and membrane-localized molecules. Supported lipid bilayers have enabled the recapitulation of the basic properties of cell membranes and have been broadly used to further our understanding of cellular behavior. Coupled with micropatterning techniques, lipid bilayer platforms have allowed for high throughput assays capable of performing quantitative analysis at a high spatiotemporal resolution. Here, an overview of the current methods of the lipid membrane patterning is presented. The fabrication and pattern characteristics are briefly described to present an idea of the quality and notable features of the methods, their utilizations for quantitative bioanalysis, as well as to highlight possible directions for the advanced micropatterning lipid membrane assays.

Nanopore Detection Assisted DNA Information Processing

The deoxyribonucleotide (DNA) molecule is a stable carrier for large amounts of genetic information and provides an ideal storage medium for next-generation information processing technologies. Technologies that process DNA information, representing a cross-disciplinary integration of biology and computer techniques, have become attractive substitutes for technologies that process electronic information alone. The detailed applications of DNA technologies can be divided into three components: storage, computing, and self-assembly. The quality of DNA information processing relies on the accuracy of DNA reading. Nanopore detection allows researchers to accurately sequence nucleotides and is thus widely used to read DNA. In this paper, we introduce the principles and development history of nanopore detection and conduct a systematic review of recent developments and specific applications in DNA information processing involving nanopore detection and nanopore-based storage. We also discuss the potential of artificial intelligence in nanopore detection and DNA information processing. This work not only provides new avenues for future nanopore detection development, but also offers a foundation for the construction of more advanced DNA information processing technologies.

Principles of Small-Molecule Transport through Synthetic Nanopores

Synthetic nanopores made from DNA replicate the key biological processes of transporting molecular cargo across lipid bilayers. Understanding transport across the confined lumen of the nanopores is of fundamental interest and of relevance to their rational design for biotechnological applications. Here we reveal the transport principles of organic molecules through DNA nanopores by synergistically combining experiments and computer simulations. Using a highly parallel nanostructured platform, we synchronously measure the kinetic flux across hundreds of individual pores to obtain rate constants. The single-channel transport kinetics are close to the theoretical maximum, while selectivity is determined by the interplay of cargo charge and size, the pores' sterics and electrostatics, and the composition of the surrounding lipid bilayer. The narrow distribution of transport rates implies a high structural homogeneity of DNA nanopores. The molecular passageway through the nanopore is elucidated via coarse-grained constant-velocity steered molecular dynamics simulations. The ensemble simulations pinpoint with high resolution and statistical validity the selectivity filter within the channel lumen and determine the energetic factors governing transport. Our findings on these synthetic pores' structure-function relationship will serve to guide their rational engineering to tailor transport selectivity for cell biological research, sensing, and drug delivery.

Microscopic Screening of Cyclodextrin Channel Blockers by DiffusiOptoPhysiology

Blockers of pore-forming toxins (PFTs) limit bacterial virulence by blocking relevant channel proteins. However, screening of desired blockers from a large pool of candidate molecules is not a trivial task. Acknowledging its advantages of low cost, high throughput, and multiplicity, DiffusiOptoPhysiology (DOP), an emerging nanopore technique that visually monitors the states of individual channel proteins without using any electrodes, has shown its potential use in the screening of channel blockers. By taking different α-hemolysin (α-HL) mutants as model PFTs and different cyclodextrins as model blockers, we report direct screening of pore blockers solely by using fluorescence microscopy. Different combinations of pores and blockers were simultaneously evaluated on the same DOP chip and a single-molecule resolution is directly achieved. The entire chip is composed of low-cost and biocompatible materials, which is fully disposable after each use. Though only demonstrated with cyclodextrin derivatives and α-HL mutants, this proof of concept has also suggested its generality to investigate other pore-forming proteins.

Membrane-Suspended Nanopores in Microchip Arrays for Stochastic Transport Recording and Sensing

The transport of nutrients, xenobiotics, and signaling molecules across biological membranes is essential for life. As gatekeepers of cells, membrane proteins and nanopores are key targets in pharmaceutical research and industry. Multiple techniques help in elucidating, utilizing, or mimicking the function of biological membrane-embedded nanodevices. In particular, the use of DNA origami to construct simple nanopores based on the predictable folding of nucleotides provides a promising direction for innovative sensing and sequencing approaches. Knowledge of translocation characteristics is crucial to link structural design with function. Here, we summarize recent developments and compare features of membrane-embedded nanopores with solid-state analogues. We also describe how their translocation properties are characterized by microchip systems. The recently developed silicon chips, comprising solid-state nanopores of 80 nm connecting femtoliter cavities in combination with vesicle spreading and formation of nanopore-suspended membranes, will pave the way to characterize translocation properties of nanopores and membrane proteins in high-throughput and at single-transporter resolution.

Single Cell-like Systems Reveal Active Unidirectional and Light-Controlled Transport by Nanomachineries

Cellular life depends on transport and communication across membranes, which is emphasized by the fact that membrane proteins are prime drug targets. The cell-like environment of membrane proteins has gained increasing attention based on its important role in function and regulation. As a versatile scaffold for bottom-up synthetic biology and nanoscience, giant liposomes represent minimalistic models of living cells. Nevertheless, the incorporation of fragile multiprotein membrane complexes still remains a major challenge. Here, we report on an approach for the functional reconstitution of membrane assemblies exemplified by human and bacterial ATP-binding cassette (ABC) transporters. We reveal that these nanomachineries transport substrates unidirectionally against a steep concentration gradient. Active substrate transport can be spatiotemporally resolved in single cell-like compartments by light, enabling real-time tracking of substrate export and import in individual liposomes. This approach will help to construct delicate artificial cell-like systems.

Lipid membranes supported by planar porous substrates

Biological membranes play key roles in cell life, but their intrinsic complexity motivated the study and development of artificial lipid membranes with the primary aim to reconstitute and understand the natural functions in vitro. Porous-supported lipid membrane (pSLM) has emerged as a flexible platform for studying the surface chemistry of the cell due to their high stability and fluidity, and their ability to study the transmembrane process of the molecules. In this review, the pSLM, for the first time, to our knowledge, was divided into three types according to the way of the porous materials support the lipid membrane, containing the lipid membrane on the pores of the porous materials, the lipid membrane on both sides of the porous materials, the lipid membrane in the pores of the porous materials. All of these pSLMs were systematically elaborated from several aspects, including the substrates, formation, and characterization. Meanwhile, the advantages and disadvantages of each model membranes were summarized. Finally, suggestions for selecting appropriate pSLM and future directions in this area are discussed.

Surface coatings for solid-state nanopores

Since their introduction in 2001, solid-state nanopores have been increasingly exploited for the detection and characterization of biomolecules ranging from single DNA strands to protein complexes. A major factor that enables the application of nanopores to the analysis and characterization of a broad range of macromolecules is the preparation of coatings on the pore wall to either prevent non-specific adhesion of molecules or to facilitate specific interactions of molecules of interest within the pore. Surface coatings can therefore be useful to minimize clogging of nanopores or to increase the residence time of target analytes in the pore. This review article describes various coatings and their utility for changing pore diameters, increasing the stability of nanopores, reducing non-specific interactions, manipulating surface charges, enabling interactions with specific target molecules, and reducing the noise of current recordings through nanopores. We compare the coating methods with respect to the ease of preparing the coating, the stability of the coating and the requirement for specialized equipment to prepare the coating.

Synthetic protein-conductive membrane nanopores built with DNA

Nanopores are key in portable sequencing and research given their ability to transport elongated DNA or small bioactive molecules through narrow transmembrane channels. Transport of folded proteins could lead to similar scientific and technological benefits. Yet this has not been realised due to the shortage of wide and structurally defined natural pores. Here we report that a synthetic nanopore designed via DNA nanotechnology can accommodate folded proteins. Transport of fluorescent proteins through single pores is kinetically analysed using massively parallel optical readout with transparent silicon-on-insulator cavity chips vs. electrical recordings to reveal an at least 20-fold higher speed for the electrically driven movement. Pores nevertheless allow a high diffusive flux of more than 66 molecules per second that can also be directed beyond equillibria. The pores may be exploited to sense diagnostically relevant proteins with portable analysis technology, to create molecular gates for drug delivery, or to build synthetic cells.

Microsystem for the single molecule analysis of membrane transport proteins

Micro-chamber arrays enable highly sensitive and quantitative bioassays at the single-molecule level. Accordingly, they are widely used for ultra-sensitive biomedical applications, e.g., digital PCR and digital ELISA. However, the versatility of micro-chambers is generally limited to reactions in aqueous solutions, although various functions of membrane proteins are extremely important. To address this issue, microsystems using arrayed micro-sized chambers sealed with lipid bilayers, referred to here as a "biomembrane microsystems", have been developed by many research groups for the analysis of membrane proteins. In this review, I would like to introduce recent progress on the single molecule analysis of membrane transport proteins using a biomembrane microsystem, and discuss the future prospects for its use in analytical and pharmacological applications.

Transparent Nanopore Cavity Arrays Enable Highly Parallelized Optical Studies of Single Membrane Proteins on Chip

Membrane proteins involved in transport processes are key targets for pharmaceutical research and industry. Despite continuous improvements and new developments in the field of electrical readouts for the analysis of transport kinetics, a well-suited methodology for high-throughput characterization of single transporters with nonionic substrates and slow turnover rates is still lacking. Here, we report on a novel architecture of silicon chips with embedded nanopore microcavities, based on a silicon-on-insulator technology for high-throughput optical readouts. Arrays containing more than 14 000 inverted-pyramidal cavities of 50 femtoliter volumes and 80 nm circular pore openings were constructed via high-resolution electron-beam lithography in combination with reactive ion etching and anisotropic wet etching. These cavities feature both, an optically transparent bottom and top cap. Atomic force microscopy analysis reveals an overall extremely smooth chip surface, particularly in the vicinity of the nanopores, which exhibits well-defined edges. Our unprecedented transparent chip design provides parallel and independent fluorescent readout of both cavities and buffer reservoir for unbiased single-transporter recordings. Spreading of large unilamellar vesicles with efficiencies up to 96% created nanopore-supported lipid bilayers, which are stable for more than 1 day. A high lipid mobility in the supported membrane was determined by fluorescent recovery after photobleaching. Flux kinetics of α-hemolysin were characterized at single-pore resolution with a rate constant of 0.96 ± 0.06 × 10^-3 s^-1. Here, we deliver an ideal chip platform for pharmaceutical research, which features high parallelism and throughput, synergistically combined with single-transporter resolution.

Nanoporous silicon nitride-based membranes of controlled pore size, shape and areal density: Fabrication as well as electrophoretic and molecular filtering characterization

A new route will be presented for an all-parallel fabrication of highly flexible, freestanding membranes with well-defined porosity. This fabrication is based on arrays of well-defined Au nanoparticles (NPs) exhibiting a high degree of hexagonal order as obtained in a first step by a proven micellar approach. These NP arrays serve as masks in a second reactive ion etching (RIE) step optimized for etching Si and some important Si compounds (silicon oxide, silicon nitride) on the nanoscale. Application to commercially available silicon nitride membranes of well-defined thickness, delivers a diaphragm with millions of nanopores of intended and controlled size, shape, and areal density with narrow distributions of these parameters. Electrophoretic transport measurements indicated a very low flow resistance of these porous membranes in ionic solutions as expected theoretically. Size-selective separation of protein molecules was demonstrated by real-time fluorescence microscopy.

Functional aqueous droplet networks

Droplet interface bilayers (DIBs), comprising individual lipid bilayers between pairs of aqueous droplets in an oil, are proving to be a useful tool for studying membrane proteins. Recently, attention has turned to the elaboration of networks of aqueous droplets, connected through functionalized interface bilayers, with collective properties unachievable in droplet pairs. Small 2D collections of droplets have been formed into soft biodevices, which can act as electronic components, light-sensors and batteries. A substantial breakthrough has been the development of a droplet printer, which can create patterned 3D droplet networks of hundreds to thousands of connected droplets. The 3D networks can change shape, or carry electrical signals through defined pathways, or express proteins in response to patterned illumination. We envisage using functional 3D droplet networks as autonomous synthetic tissues or coupling them with cells to repair or enhance the properties of living tissues.

Functionalization of single solid state nanopores to mimic biological ion channels: A review

In nature, ion channels are highly selective pores and act as gate to ensure selective ion transport, allowing ions to cross the membrane. By mimicking them, single solid state nanopore devices emerge as a new, powerful class of molecule sensors that allow for the label-free detection of biomolecules (DNA, RNA, and proteins), non-biological polymers, as well as small molecules. In this review, we exhaustively describe the fabrication and functionalization techniques to design highly robust and selective solid state nanopores. First we outline the different materials and methods to design nanopores, we explain the ionic conduction in nanopores, and finally we summarize some techniques to modify and functionalize the surface in order to obtain biomimetic nanopores, responding to different external stimuli.

Electrophysiology of Epithelial Sodium Channel (ENaC) Embedded in Supported Lipid Bilayer Using a Single Nanopore Chip

Nanopore-based technologies are highly adaptable supports for developing label-free sensor chips to characterize lipid bilayers, membrane proteins, and nucleotides. We utilized a single nanopore chip to study the electrophysiology of the epithelial Na⁺ channel (ENaC) incorporated in supported lipid membrane (SLM). An isolated nanopore was developed inside the silicon cavity followed by fusing large unilamellar vesicles (LUVs) of DPPS (1,2-dipalmitoyl-sn-glycero-3-phosphoserine) and DPPE (1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine) to produce a solvent-free SLM with giga-ohm (GΩ) sealed impedance. The presence and thickness of SLM on the nanopore chip were confirmed using atomic force spectroscopy. The functionality of SLM with and without ENaC was verified in terms of electrical impedance and capacitance by sweeping the frequency from 0.01 Hz to 100 kHz using electrochemical impedance spectroscopy. The nanopore chip exhibits long-term stability for the lipid bilayer before (144 h) and after (16 h) incorporation of ENaC. Amiloride, an inhibitor of ENaC, was utilized at different concentrations to test the integrity of fused ENaC in the lipid bilayer supported on a single nanopore chip. The developed model presents excellent electrical properties and improved mechanical stability of SLM, making this technology a reliable platform to study ion channel electrophysiology.

Vesicle fusion with bilayer lipid membrane controlled by electrostatic interaction

The fusion of proteoliposomes is a promising approach for incorporating membrane proteins in artificial lipid membranes. In this study, we employed an electrostatic interaction between vesicles and supported bilayer lipid membranes (s-BLMs) to control the fusion process. We combined large unilamellar vesicles (LUVs) containing anionic lipids, which we used instead of proteoliposomes, and s-BLMs containing cationic lipids to control electrostatic interaction. Anionic LUVs were never adsorbed or ruptured on the SiO2 substrate with a slight negative charge, and selectively fused with cationic s-BLMs. The LUVs can be fused effectively to the target position. Furthermore, as the vesicle fusion proceeds and some of the positive charges are neutralized, the attractive interaction weakens and finally the vesicle fusion saturates. In other words, we can control the number of LUVs fused with s-BLMs by controlling the concentration of the cationic lipids in the s-BLMs. The fluidity of the s-BLMs after vesicle fusion was confirmed to be sufficiently high. This indicates that the LUVs attached to the s-BLMs were almost completely fused, and there were few intermediate state vesicles in the fusion process. We could control the position and amount of vesicle fusion with the s-BLMs by employing an electrostatic interaction.

Through a Window, Brightly: A Review of Selected Nanofabricated Thin-Film Platforms for Spectroscopy, Imaging, and Detection

We present a review of the use of selected nanofabricated thin films to deliver a host of capabilities and insights spanning bioanalytical and biophysical chemistry, materials science, and fundamental molecular-level research. We discuss approaches where thin films have been vital, enabling experimental studies using a variety of optical spectroscopies across the visible and infrared spectral range, electron microscopies, and related techniques such as electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and single molecule sensing. We anchor this broad discussion by highlighting two particularly exciting exemplars: a thin-walled nanofluidic sample cell concept that has advanced the discovery horizons of ultrafast spectroscopy and of electron microscopy investigations of in-liquid samples; and a unique class of thin-film-based nanofluidic devices, designed around a nanopore, with expansive prospects for single molecule sensing. Free-standing, low-stress silicon nitride membranes are a canonical structural element for these applications, and we elucidate the fabrication and resulting features-including mechanical stability, optical properties, X-ray and electron scattering properties, and chemical nature-of this material in this format. We also outline design and performance principles and include a discussion of underlying material preparations and properties suitable for understanding the use of alternative thin-film materials such as graphene.

Silicon Nitride Thin Films for Nanofluidic Device Fabrication

Silicon nitride is a ubiquitous and well-established nanofabrication material with a host of favourable properties for creating nanofluidic devices with a range of compelling designs that offer extraordinary discovery potential. Nanochannels formed between two thin silicon nitride windows can open up vistas for exploration by freeing transmission electron microscopy to interrogate static structures and structural dynamics in liquid-based samples. Nanopores present a strikingly different architecture—nanofluidic channels through a silicon nitride membrane—and are one of the most promising tools to emerge in biophysics and bioanalysis, offering outstanding capabilities for single molecule sensing. The constrained environments in such nanofluidic devices make surface chemistry a vital design and performance consideration. Silicon nitride has a rich and complex surface chemistry that, while too often formidable, can be tamed with new, robust surface functionalization approaches. We will explore how a simple structural element—a ∼100 nm-thick silicon nitride window—can be used to fabricate devices to wrest unprecedented insights from the nanoscale world. We will detail the intricacies of native silicon nitride surface chemistry, present surface chemical modification routes that leverage the richness of available surface moieties, and examine the effect of engineered chemical surface functionality on nanofluidic device character and performance.

Membrane Transport Processes Analyzed by a Highly Parallel Nanopore Chip System at Single Protein Resolution

Membrane protein transport on the single protein level still evades detailed analysis, if the substrate translocated is non-electrogenic. Considerable efforts have been made in this field, but techniques enabling automated high-throughput transport analysis in combination with solvent-free lipid bilayer techniques required for the analysis of membrane transporters are rare. This class of transporters however is crucial in cell homeostasis and therefore a key target in drug development and methodologies to gain new insights desperately needed. The here presented manuscript describes the establishment and handling of a novel biochip for the analysis of membrane protein mediated transport processes at single transporter resolution. The biochip is composed of microcavities enclosed by nanopores that is highly parallel in its design and can be produced in industrial grade and quantity. Protein-harboring liposomes can directly be applied to the chip surface forming self-assembled pore-spanning lipid bilayers using SSM-techniques (solid supported lipid membranes). Pore-spanning parts of the membrane are freestanding, providing the interface for substrate translocation into or out of the cavity space, which can be followed by multi-spectral fluorescent readout in real-time. The establishment of standard operating procedures (SOPs) allows the straightforward establishment of protein-harboring lipid bilayers on the chip surface of virtually every membrane protein that can be reconstituted functionally. The sole prerequisite is the establishment of a fluorescent read-out system for non-electrogenic transport substrates. High-content screening applications are accomplishable by the use of automated inverted fluorescent microscopes recording multiple chips in parallel. Large data sets can be analyzed using the freely available custom-designed analysis software. Three-color multi spectral fluorescent read-out furthermore allows for unbiased data discrimination into different event classes, eliminating false positive results. The chip technology is currently based on SiO2 surfaces, but further functionalization using gold-coated chip surfaces is also possible.

Recent advancement on micro-/nano-spherical lens photolithography based on monolayer colloidal crystals

Highly ordered nanostructures have gained substantial interest in the research community due to their fascinating properties and wide applications.Micro-/nano-spherical lens photolithography (SLPL) has been recognized as an inexpensive, inherently parallel, and high-throughput approach to the creation of highly ordered nanostructures. SLPL based on monolayer colloidal crystals (MCCs) of self-assembled colloidal micro-/nano-spheres have recently made remarkable progress in overcoming the constraints of conventional photolithography in terms of cost, feature size, tunability, and pattern complexity. In this review, we highlight the current state-of-the-art in this field with an emphasis on the fabrication of a variety of highly ordered nanostructures based on this technique and their demonstrated applications in light emitting diodes, nano-patterning semiconductors, and localized surface plasmon resonance devices. Finally, we present a perspective on the future development of MCC-based SLPL technique, including a discussion on the improvement of the quality of MCCs and the compatibility of this technique with other semiconductor micromachining process for nanofabrication.

Attolitre-sized lipid bilayer chamber array for rapid detection of single transporters

We present an attolitre-sized arrayed lipid bilayer chamber system (aL-ALBiC) for rapid and massively parallel single-molecule assay of membrane transporter activity. Because of the small reaction volume (200 aL), the aL-ALBiC performed fast detection of single transporter activity, thereby enhancing the sensitivity, throughput, and accuracy of the analysis. Thus, aL-ALBiC broadens the opportunities for single-molecule analysis of various membrane transporters and can be used in pharmaceutical applications such as drug screening.

Mechanics of lipid bilayers: What do we learn from pore-spanning membranes?

The mechanical properties of biological membranes have become increasingly important not only from a biophysical viewpoint but also as they play a substantial role in the information transfer in cells and tissues. This minireview summarizes some of our recent understanding of the mechanical properties of artificial model membranes with particular emphasis on membranes suspending an array of pores, so called pore-spanning membranes. A theoretical description of the mechanical properties of these membranes might pave the way to biophysically describe and understand the complex behavior of native biological membranes. This article is part of a Special Issue entitled: Mechanobiology.

An integrated system for optical and electrical detection of single molecules/particles inside a solid-state nanopore

Nanopore techniques have proven to be useful tools for single-molecule detection. The combination of optical detection and ionic current measurements enables a new possibility for the parallel readout of multiple nanopores without complex nanofluidics and embedded electrodes. In this study, we developed a new integrated system for the label-free optical and electrical detection of single molecules based on a metal-coated nanopore. The entire system, containing a dark-field microscopy system and an ultralow current detection system with high temporal resolution, was designed and fabricated. An Au-coated nanopore was used to generate the optical signal. Light scattering from a single Au-coated nanopore was measured under a dark-field microscope. A lab-built ultralow current detection system was designed for the correlated optical and electrical readout. This integrated system might provide more direct and detailed information on single analytes inside the nanopore compared with classical ionic current measurements.

Lipid bilayer arrays: cyclically formed and measured

Artificial lipid bilayers have many uses. They are well established for scientific studies of reconstituted ion channels, used to host engineered pore proteins for sensing, and can potentially be applied in DNA sequencing. Droplet bilayers have significant technological potential for enabling many of these applications due to their compatibility with automation and array platforms. To further develop this potential, we have simplified the formation and electrical measurement of droplet bilayers using an apparatus that only requires fluid dispensation. We achieved simultaneous bilayer formation and measurement over a 32-element array with ~80% yield and no operator input following fluid addition. Cycling these arrays resulted in the formation and measurement of 96 out of 120 possible bilayers in 80 minutes, a sustainable rate that could significantly increase with automation and greater parallelization. This turn-key, high-yield approach to making artificial lipid bilayers requires no training, making the capability of creating and measuring lipid bilayers and ion channels accessible to a much wider audience. In addition, this approach is low-cost, parallelizable, and automatable, allowing high-throughput studies of ion channels and pore proteins in lipid bilayers for sensing or screening applications.

Lipid bilayers on a picoliter microdroplet array for rapid fluorescence detection of membrane transport

This paper describes picoliter-sized lipid bilayer chambers and their theoretical model for the rapid detection of membrane transport. To prepare the chambers, semispherical aqueous droplets are patterned on a hydrophilic/hydrophobic substrate and then brought into contact with another aqueous droplet in lipid-dispersed organic solvent, resulting in the formation of the lipid bilayers on the semispherical droplets. The proposed method implements the lipid bilayer chambers with 25-fold higher ratio of lipid membrane area (S) to chamber volume (V) compared to the previous spherical droplet chambers. Using these chambers, we are able to trace the time-course of Ca(2+) influx through α-hemolysin pores by a fluorescent indicator. Moreover, we confirm that the detection time of the substrate transport is inversely proportional to the S/V ratio of the developed chambers, which is consistent with the simulation results based on the developed model. Our chambers and model might be useful for rapid functional analyses of membrane transport phenomena.

Controllable occurrence of free-standing lipid membranes on nanograting structured supports

Supported lipid bilayers (SLBs) have been widely used to study protein-lipid membrane interactions because their planar geometry is suitable for many surface analysis tools. However, the friction coupling between the support and the membrane can influence the properties of biomolecules in the membrane. Many studies have attempted to span SLBs over nanostructured supports to create free-standing regions in SLBs for biosensor applications. However, membranes following the support surface contour are more frequently observed than are free-standing membranes on structured supports, indicating that the parameter range suitable for formation of free-standing SLBs might be narrow and more information is necessary to understand the required conditions. The objective of this study was to estimate the system energies of free-standing and contour-following membrane states and determine which state is the most energetically favorable under various conditions. For a lipid membrane preferring to stay close to the support, an energy reward occurs when they are in close proximity; however, increasing the contact area on a structured surface can result in an energy penalty because of the bending of the lipid bilayer. Whether the energy reward or the energy penalty dominates could determine the membrane state. We used the extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and the Helfrich bending theory to relate the energy sizes to experimentally controllable parameters. We experimentally examined whether the membrane state followed the model prediction when we used various buffer ionic strengths, various lipid types, and nanograting supports with three different geometries. Because it is difficult to observe the experimental membrane state directly at the nanoscale, we developed a method to use the fluorescence recovery shape change after photobleaching to distinguish experimental membrane states at the micrometer scale. Our experimental results closely matched the theoretical predictions, suggesting that the developed model can be used to predict suitable conditions for formation of free-standing bilayers on nanostructured solid supports.

Highly parallel transport recordings on a membrane-on-nanopore chip at single molecule resolution

Membrane proteins are prime drug targets as they control the transit of information, ions, and solutes across membranes. Here, we present a membrane-on-nanopore platform to analyze nonelectrogenic channels and transporters that are typically not accessible by electrophysiological methods in a multiplexed manner. The silicon chip contains 250,000 femtoliter cavities, closed by a silicon dioxide top layer with defined nanopores. Lipid vesicles containing membrane proteins of interest are spread onto the nanopore-chip surface. Transport events of ligand-gated channels were recorded at single-molecule resolution by high-parallel fluorescence decoding.

Microarrays and single molecules: an exciting combination

Biomolecules positioned at interfaces have spawned many applications in bioanalysis, biophysics, and cell biology. This Highlight describes recent developments in the research areas of protein and DNA arrays, and single-molecule sensing. We cover the ultrasensitive scanning of conventional microarrays as well as the generation of arrays composed of individual molecules. The combination of these tools has improved the detection limits and the dynamic range of microarray analysis, helped develop powerful single-molecule sequencing approaches, and offered biophysical examination with high throughput and molecular detail. The topic of this Highlight integrates several disciplines and is written for interested chemists, biophysicists and nanotechnologists.

Sampling a biomarker of the human immunodeficiency virus across a synthetic nanopore

One primary goal in nanobiotechnology is designing new methodologies for molecular biomedical diagnosis at stages much earlier than currently possible and without use of expensive reagents and sophisticated equipment. In this work, we show the proof of principle for single-molecule detection of the nucleocapsid protein 7 (NCp7), a protein biomarker of the HIV-1 virus, using synthetic nanopores and the resistive-pulse technique. The biosensing mechanism relied upon specific interactions between NCp7 and aptamers of stem-loop 3 (SL3) in the packaging domain of the retroviral RNA genome. One critical step of this study was the choice of the optimal size of the nanopores for accurate, label-free determinations of the dissociation constant of the NCp7 protein-SL3 RNA aptamer complex. Therefore, we systematically investigated the NCp7 protein-SL3 RNA aptamer complex employing two categories of nanopores in a silicon nitride membrane: (i) small, whose internal diameter was smaller than 6 nm, and (ii) large, whose internal diameter was in the range of 7 to 15 nm. Here, we demonstrate that only the use of nanopores with an internal diameter that is smaller than or comparable with the largest cross-sectional size of the NCp7-SL3 aptamer complex enables accurate measurement of the dissociation constant between the two interacting partners. Notably, this determination can be accomplished without the need for prior nanopore functionalization. Moreover, using small solid-state nanopores, we demonstrate the ability to detect drug candidates that inhibit the binding interactions between NCp7 and SL3 RNA by using a test case of N-ethylmaleimide.

Recent advances in nanopore sequencing

The prospect of nanopores as a next-generation sequencing platform has been a topic of growing interest and considerable government-sponsored research for more than a decade. Oxford Nanopore Technologies recently announced the first commercial nanopore sequencing devices, to be made available by the end of 2012, while other companies (Life, Roche, and IBM) are also pursuing nanopore sequencing approaches. In this paper, the state of the art in nanopore sequencing is reviewed, focusing on the most recent contributions that have or promise to have next-generation sequencing commercial potential. We consider also the scalability of the circuitry to support multichannel arrays of nanopores in future sequencing devices, which is critical to commercial viability.

Nanosensors lost in space. A random walk study of single molecule detection with single-nanopore sensors

Nanopores by providing single molecule detection and manipulation are lately in the forefront of life science and nanotechnology research. While single nanopore sensors can detect the residence of even one molecule or nanoparticle within the nanopore, the analytical significance of this process is often misunderstood. A fundamental problem of nanosensors is that their sensing zone is generally infinitesimal with respect of the probed sample volume. Consequently, the probability to have in extremely diluted solutions target molecules or nanoparticles encountering the nanosensor is low. Thus, even though the sensor by itself has single molecule detection capability the average time frame in which this occurs is by far not irrelevant for the analysis. In this paper we report on random walk simulations to determine the average time (encounter time) needed by a single molecule to encounter a single nanopore sensor. By assigning the simulation environment with real space and time values a semi-empirical equation for expressing the average encounter time in purely diffusive systems is provided. We also show that random walk simulations can be adapted to evaluate the encounter time in the presence of an external force field acting on the target molecule. As practically relevant application the case of electrophoretically driving DNA strands towards the nanopore sensor is presented and a semi-empirical equation for the encounter time is provided.

A zeptoliter volume meter for analysis of single protein molecules

A central goal in bioanalytics is to determine the concentration of and interactions between biomolecules. Nanotechnology allows performing such analyses in a highly parallel, low-cost, and miniaturized fashion. Here we report on label-free volume, concentration, and mobility analysis of single protein molecules and nanoparticles during their diffusion through a subattoliter detection volume, confined by a 100 nm aperture in a thin gold film. A high concentration of small fluorescent molecules renders the aqueous solution in the aperture brightly fluorescent. Nonfluorescent analytes diffusing into the aperture displace the fluorescent molecules in the solution, leading to a decrease of the detected fluorescence signal, while analytes diffusing out of the aperture return the fluorescence level. The resulting fluorescence fluctuations provide direct information on the volume, concentration, and mobility of the nonfluorescent analytes through fluctuation analysis in both time and amplitude.

Ca2+ ion transport through channels formed by α-hemolysin analyzed using a microwell array on a Si substrate

For the functional analysis of ion channel activity, an artificial lipid bilayer suspended over microwells was formed that ruptured giant unilamellar vesicles on a Si substrate. Ca(2+) ion indicators (fluo-4) were confined in the microwells by sealing the microwells with a lipid bilayer. An overhang formed at the microwells prevented the lipid membrane from falling into them and allowed the stable confinement of the fluorescent probes. The transport of Ca(2+) ions through the channels formed by α-hemolysin inserted in a lipid membrane was analyzed by employing the fluorescence intensity change of fluo-4 in the microwells. The microwell volume was very small (1-100 fl), so a highly sensitive monitor could be realized. The detection limit is several tens of ions/s/μm(2), and this is much smaller than the ion current in a standard electrophysiological measurement. Smaller microwells will make it possible to mimic a local ion concentration change in the cells, although the signal to noise ratio must be further improved for the functional analysis of a single channel. We demonstrated that a microwell array with confined fluorescent probes sealed by a lipid bilayer could constitute a basic component of a highly sensitive biosensor array that works with functional membrane proteins. This array will allow us to realize high throughput and parallel testing devices.

Separating attoliter-sized compartments using fluid pore-spanning lipid bilayers

Anodic aluminum oxide (AAO) is a porous material having aligned cylindrical compartments with 55-60 nm diameter pores, and being several micrometers deep. A protocol was developed to generate pore-spanning fluid lipid bilayers separating the attoliter-sized compartments of the nanoporous material from the bulk solution, while preserving the optical transparency of the AAO. The AAO was selectively functionalized by silane chemistry to spread giant unilamellar vesicles (GUVs) resulting in large continuous membrane patches covering the pores. Formation of fluid single lipid bilayers through GUV rupture could be readily observed by fluorescence microscopy and further supported by conservation of membrane surface area, before and after GUV rupture. Fluorescence recovery after photobleaching gave low immobile fractions (5-15%) and lipid diffusion coefficients similar to those found for bilayers on silica. The entrapment of molecules within the porous underlying cylindrical compartments, as well as the exclusion of macromolecules from the nanopores, demonstrate the barrier function of the pore-spanning membranes and could be investigated in three-dimensions using confocal laser scanning fluorescence imaging.

Nanobiotechnology: A new look for nanopore sensing

Coating solid-state nanopores with fluid lipid bilayers can reduce the translocation speeds of molecules and prevent the nanopores from clogging.