Dumbbell-like PtPd-Fe₃O₄ nanoparticles for enhanced electrochemical detection of H₂O₂

A machine vision tool for multi-color H2O2 sensing by MoOx nanoparticles with oxygen vacancies

Improving the ease of operation and portability of hydrogen peroxide (H2O2) detection in daily production and life holds significant application value. However, it remains a challenge to achieve rapid colorimetric detection of H2O2 and color change quantification. In this study, we achieved rapid and visual detection of H2O2 by MoOx (2 ≤ x ≤ 3) nanoparticles with rich oxygen vacancies using machine vision. As the concentration of H2O2 increases, the detection system exhibited a visible multi-color change from blue to green and then yellow and the absorption peak near 680 nm measured by the UV-visible spectrophotometer gradually decreased. With excellent sensitivity, a wide linear range of 0.1-600 μmol/L, concentrations as low as 0.1 μmol/L can be detected with good selectivity towards H2O2. The sensing mechanism of detecting H2O2 by the change of oxygen vacancies in MoOx was revealed through characterization methods such as XPS, EPR, and DFT. In addition, the Hue, Saturation, Value (HSV) visual analysis system based on MoOx was constructed to assist in the rapid, portable, and sensitive monitoring of H2O2 in practical application scenarios. This work offers an easy-to operate, low cost, and convenience for achieving rapid colorimetric determination of H2O2 and has broad application prospects in daily life and industrial production.

Optimized preparation of Ni-Febm bimetallic particles by ball milling NiSO4 and iron powder for efficient removal of triclosan

The excessive usage and emissions of triclosan (TCS) pose a serious threat to aquatic environments. Iron-based bimetallic particles (Pd/Fe, Ni/Fe, and Cu/Fe, etc.) were widely used for the degradation of chlorophenol pollutants. This study proposed a novel synthesis method for the preparation of Ni/Fe bimetallic particles (Ni-Febm) by ball milling microscale zero valent iron ZVI (mZVI) and NiSO4. Ball-milling conditions such as ball-milling time, ball-milling speed and ball-to-powder ratio were optimized to prepare high activity Ni-Febm bimetallic particles. During the ball-milling process, Ni2+ was reduced to Ni0 and formed a coupled structure with ZVI. The amount of Ni0 on ZVI significantly affected the activity of Ni-Febm bimetallic particles. The highest activity Ni-Febm bimetallic particles with Ni/Fe ratio of 0.03 were synthesized under optimized conditions, which could remove 86.56% of TCS (10 μM) in aerobic aqueous solution within 60 min. In addition, higher particle dosage, lower pH condition and higher reaction temperature were more conducive for TCS degradation. The higher corrosion current and lower electron transfer impedance of Ni-Febm bimetallic particles were the main reasons for its high activity. The hydrogen atom (•H) on the surface of Ni-Febm bimetallic particles was mainly contributed to the removal of TCS, as reductive transformation products of TCS were detected by LC-TOF-MS. Notably, a small amount of oxidation products were discovered. The total dechlorination rate of TCS was calculated to be 39.67%. After eight reaction cycles, the residual Ni-Febm bimetallic particles could still degrade 28.34% of TCS within 6 h. Low Ni2+ leaching during reaction indicated that Ni-Febm bimetallic particles did not pose potential environmental risks. The prepared environmental-friendly Ni-Febm bimetallic particles with high activity have great potential in the degradation of other chlorinated organic compounds in wastewater.

Sensitive detection of extracellular hydrogen peroxide using plasmon-enhanced electrochemical activity on Pd-tipped Au nanobipyramids

The fabrication of electroactive nanostructures with high electron concentration and specific electron transport is crucial for electrochemical sensing. In this study, a plasmon-enhanced electrochemical sensor has been developed for the detection of extracellular hydrogen peroxide (H2O2) from cancer cells, utilizing Pd-tipped Au nanobipyramids (PTA NBPs) as the electrocatalysts. Plasmonic PTA NBPs were synthesized by depositing Pd nanoparticles onto the tips of Au nanobipyramids (Au NBPs). Under excitation of localized surface plasmon resonance (LSPR), the PTA NBPs generate high-energy electron-hole pairs (e-/h+) on their surface. The generated electrons (e-) significantly enhance the electrochemical reduction of H2O2. Based on this, a plasmon-enhanced H2O2 electrochemical sensor is constructed with high sensitivity (986.57 μA mM-1 cm-2), low detection limit (0.02 μM), wide linear range (0.1 μM to 980 μM), and good stability and repeatability. Moreover, this sensor also enables the measurement of extracellular H2O2 derived from cancer cells (MCF-7), highlighting its potential applications in cellular biology and biomedical research.

G-quadruplex-hemin DNAzyme functionalized nanopipettes: Fabrication and sensing application

Solid-nanopores/nanopipettes have the exquisite ability to reveal the changes in molecular volume due to the advantages of adjustable size, good rigidity and low noise. Herein, a new platform for sensing application was established based on G-quadruplex-hemin DNAzyme (GQH) functionalized gold-coated nanopipettes. In this method, GQH was immobilized on gold-coated nanopipette, which could be used as a catalyst for the reaction of H₂O₂ with 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) to promote the conversion of ABTS to ABTS⁺ ions inside gold-coated nanopipette, and the change of transmembrane ion current could be monitored in real time. At the optimal conditions, there was a correlation between the ion current and the concentration of H₂O₂ in a certain range, which could be used for the hydrogen peroxide sensing. The GQH immobilized nanopipette provides a useful platform to investigate enzymatic catalysis in confined environment, which can be used in electrocatalysis, sensing and fundamental electrochemistry.

Recent Progress in Emerging Novel MXenes Based Materials and their Fascinating Sensing Applications

Early transition metals based 2D carbides, nitrides and carbonitrides nanomaterials are known as MXenes, a novel and extensive new class of 2D materials family. Since the first accidently synthesis based discovery of Ti₃ C₂ in 2011, more than 50 additional compositions have been experimentally reported, including at least eight distinct synthesis methods and also more than 100 stoichiometries are theoretically studied. Due to its distinctive surface chemistry, graphene like shape, metallic conductivity, high hydrophilicity, outstanding mechanical and thermal properties, redox capacity and affordable with mass-produced nature, this diverse MXenes are of tremendous scientific and technological significance. In this review, first we'll come across the MXene based nanomaterials possible synthesis methods, their advantages, limitations and future suggestions, new chemistry related to their selected properties and potential sensing applications, which will help us to explain why this family is growing very fast as compared to other 2D families. Secondly, problems that help to further improve commercialization of the MXene nanomaterials based sensors are examined, and many advances in the commercializing of the MXene nanomaterials based sensors are proposed. At the end, we'll go through the current challenges, limitations and future suggestions.

Electrochemical monitoring of hydrogen peroxide by a signal-amplified microfluidic chip coupled with colloidal VO2 nanostructures as a peroxidase enzyme mimic

We present a novel electrochemical microfluidic device for the sensitive and selective detection of hydrogen peroxide (H₂O₂) through a VO₂ nanostructure enzyme mimic. The low-cost ($0.50) microfluidic chip was fabricated using a simple and rapid prototyping technique via three syringe needles. Each needle played the role of an electrode (working, reference, and counter), and was connected by micro-hoses to a construction of the electrochemical microfluidic chip. The colloidal VO₂ nanoflakes with peroxidase-like activity could be easily transferred on to the electrodes by a syringe, for development of a novel electrochemical platform to enable the detection of H₂O₂. The unique microfluidic electrochemical sensor delivered a wide linear dynamic range from 0.5 to 300 μM, with a limit of detection of 0.14 μM. The facile, rapid, sensitive, and selective as-fabricated H₂O₂ sensors were proven to be appropriate for the real-time monitoring of H₂O₂ released from PC12 cells. The integration of a microfluidic sensor with an enzyme mimic nanostructure is essentially a promising strategy for the low-cost and accurate monitoring of physiological processes.

Electrochemical Sensing of H2O2 by Employing a Flexible Fe3O4/Graphene/Carbon Cloth as Working Electrode

We report the synthesis of Fe₃O₄/graphene (Fe₃O₄/Gr) nanocomposite for highly selective and highly sensitive peroxide sensor application. The nanocomposites were produced by a modified co-precipitation method. Further, structural, chemical, and morphological characterization of the Fe₃O₄/Gr was investigated by standard characterization techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and high-resolution TEM (HRTEM), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The average crystal size of Fe₃O₄ nanoparticles was calculated as 14.5 nm. Moreover, nanocomposite (Fe₃O₄/Gr) was employed to fabricate the flexible electrode using polymeric carbon fiber cloth or carbon cloth (pCFC or CC) as support. The electrochemical performance of as-fabricated Fe₃O₄/Gr/CC was evaluated toward H₂O₂ with excellent electrocatalytic activity. It was found that Fe₃O₄/Gr/CC-based electrodes show a good linear range, high sensitivity, and a low detection limit for H₂O₂ detection. The linear range for the optimized sensor was found to be in the range of 10-110 μM and limit of detection was calculated as 4.79 μM with a sensitivity of 0.037 µA μM^-1 cm^-2. The cost-effective materials used in this work as compared to noble metals provide satisfactory results. As well as showing high stability, the proposed biosensor is also highly reproducible.

Ligand influence in electrocatalytic properties of Cu(II) triazole complexes for hydrogen peroxide detection in aqueous media

In this work, electrocatalytic changes of Cu(II) triazole complexes (Cu(L)₂) resulting from inductive effects were evaluated to fabricate a sensor for hydrogen peroxide (H₂O₂) determination. Three copper(II) complexes with electronically differentiated ligands were synthesized by slow diffusion method and characterized by X-ray crystallography, Fourier transformed infrared (FTIR), UV-Vis, scanning electron microscopy (SEM) and voltammetry cyclic (CV). Cu(LOMe)2/GC, Cu(LBr)2/GC and Cu(LNO2)2/GC sensors were then prepared. Under optimal conditions (pH = 11), the optimal sensor presented a response at -0.5 V, good linear range of 1-32 μM, reproducibility (1.7%), repeatability (1.2%), LOD of 0.0246 μM (S/N = 5), LOQ of 0.0747 μM (S/N = 5) and selectivity. Additionally, Cu(LNO2)2/GC sensor has been successfully applied in commercial substances, such as mouthwash, milk and tea.

Au-Fe3O4 heterodimer multifunctional nanoparticles-based platform for ultrasensitive naked-eye detection of Salmonella typhimurium

In this work, we developed an ultrasensitive colorimetry for Salmonella typhimurium detection with multifunctional Au-Fe₃O₄ dumbbell-like nanoparticles (DBNPs) which possessed easy bio-modifiability, excellent LSPR characteristics, superparamagnetic properties and super peroxidase-like activity. In the detection, the anti-S. typhimurium antibody modified DBNPs (IDBNPs) bound with S. typhimurium and aggregated on their surfaces in a large number, which showed much quicker magnetic response than free IDBNPs. By controlling appropriate separation conditions, IDBNPs@S. typhimurium composites were captured, while free IDBNPs were remained in the supernatant. Therefore, by detecting the absorbance of the supernatant, quantitative detection was achieved from 10 to 1000 CFU/mL. Moreover, utilizing the peroxidase-like activity of IDBNPs, we further realized semi-quantitative naked-eye detection. By adding ABTS into the above supernatant, which was oxidized to green chelate (OxABTS), colorimetric signal was amplified significantly, and meanwhile, the green chelates and the wine-red IDBNPs engendered mixed color, enhancing the range of color gradation and greatly improving the visual resolution. Finally, a detection limit (10 CFU/mL) comparable with that of above spectrum measurement was achieved. Besides, our method exhibited efficient capture capability (nearly 100% even for rare S. typhimurium), and had good stability and specificity, and acceptable anti-interference ability in fetal bovine serum and milk samples.

Vertically Oriented Metallic Heterodimer Array Semiembedded in Flat Conductive Carbon Film for Electrochemical Application

General synthesis of a highly oriented metallic heterodimer array based on a selective electrodeposition technique onto a metal nanoparticle-embedded carbon film is proposed, which enables the preparation of heterodimers with a wide variety of metal combinations. This method requires no surfactant, capping agent, organic solvent, or heat treatment. As a representative metal combination, a nickel (Ni)/palladium (Pd) heterodimer array was prepared by selective electrodeposition of Ni nanoparticles (Ni NPs) on top of partially exposed Pd NPs embedded in carbon film electrodes fabricated by a cosputtering technique. Such a selective electrodeposition becomes possible by utilizing the difference in electrodeposition overpotentials between carbon and Pd NP surfaces. X-ray photoelectron spectroscopy revealed a charge transfer from Ni NPs to Pd NPs, implying that the catalytic and optical properties can be expected to be controllable. The formed heterodimer array structure was mechanically stable against ultrasonication in ethanol for over 1 h because most parts of the Pd NPs were tightly embedded in the carbon film. After conversion from Ni to nickel hydroxide (Ni(OH)₂), the electrode showed high electrocatalytic activity toward glucose oxidation, with a higher turnover rate and lower overpotential compared to Ni(OH)₂ electrodeposited on pure carbon film electrodes.

Synthetic Approaches to Colloidal Nanocrystal Heterostructures Based on Metal and Metal-Oxide Materials

Composite inorganic nanoarchitectures, based on combinations of distinct materials, represent advanced solid-state constructs, where coexistence and synergistic interactions among nonhomologous optical, magnetic, chemical, and catalytic properties lay a basis for the engineering of enhanced or even unconventional functionalities. Such systems thus hold relevance for both theoretical and applied nanotechnology-based research in diverse areas, spanning optics, electronics, energy management, (photo)catalysis, biomedicine, and environmental remediation. Wet-chemical colloidal synthetic techniques have now been refined to the point of allowing the fabrication of solution free-standing and easily processable multicomponent nanocrystals with sophisticated modular heterostructure, built upon a programmed spatial distribution of the crystal phase, composition, and anchored surface moieties. Such last-generation breeds of nanocrystals are thus composed of nanoscale domains of different materials, assembled controllably into core/shell or heteromer-type configurations through bonding epitaxial heterojunctions. This review offers a critical overview of achievements made in the design and synthetic elaboration of colloidal nanocrystal heterostructures based on diverse associations of transition metals (with emphasis on plasmonic metals) and transition-metal oxides. Synthetic strategies, all leveraging on the basic seed-mediated approach, are described and discussed with reference to the most credited mechanisms underpinning regioselective heteroepitaxial deposition. The unique properties and advanced applications allowed by such brand-new nanomaterials are also mentioned.

Pt–Pd Bimetallic Aerogel as High-Performance Electrocatalyst for Nonenzymatic Detection of Hydrogen Peroxide

Hydrogen peroxide (H2O2) plays an indispensable role in the biological, medical, and chemical fields. The development of an effective H2O2 detecting method is of great importance. In the present work, a series of PtxPdy bimetallic aerogels and Pt, Pd monometallic aerogels were controllably synthesized by one-step gelation method. Their morphologies and compositions were characterized by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and so forth. These aerogels were used as nonenzyme electrocatalysts for the detection of H2O2. The cyclic voltammetric and amperometric results demonstrated that the performance of the metal aerogels showed volcano-type behavior, with the Pt50Pd50 aerogel sitting on top. The Pt50Pd50 aerogel-based electrochemical sensor exhibited excellent comprehensive performance, with a low overpotential of −0.023 V vs. Ag/AgCl, a broad linear range from 5.1 to 3190 μM (R2 = 0.9980), and a high sensitivity of 0.19 mA mM−1 cm−2, in combination with good anti-interference ability and stability. A comprehensive study indicated that the superior sensing performance of the Pt50Pd50 aerogel is closely related to its optimized d-band center and larger cumulative pore volume. This work first applied Pt–Pd bimetallic aerogels into the detection of H2O2 and shows the promising application of noble metal aerogels in the electrochemical sensing area.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

A Label-Free Colorimetric Assay Based on Gold Nanoparticles for the Detection of H2O2 and Glucose

The significance of sensing hydrogen peroxide (H2O2) is due to its ubiquity, being a potential biomarker as well as an end-product of several oxidation reactions. Herein, based on gold nanoparticles (AuNPs) and coupled with single-stranded DNA (ssDNA) and ceria nanoparticles (CeO2), we developed a novel colorimetric method to detect H2O2 and glucose in NaCl solutions. In the presence of H2O2, ssDNA adsorbed on the surface of CeO2 could be released and subsequently decorated AuNPs, resulting in a distinct color change of the aqueous solution from purple to red, which could be observed by the naked eye. Since H2O2 can be produced in the process of glucose oxidation by glucose oxidase (GOx), this approach can also be employed to detect glucose. By employing this sensing system, the detection limits for H2O2 and glucose are about 0.21 μM and 3.01 µM, respectively. Additionally, monitoring the content of glucose in blood serum samples was successfully achieved by the proposed strategy. This work opens a potential avenue for the quantitative detection of H2O2 and glucose in clinical diagnostics.

2D material-based peroxidase-mimicking nanozymes: catalytic mechanisms and bioapplications

The boom in nanotechnology brings new insights into the development of artificial enzymes (nanozymes) with ease of modification, lower manufacturing cost, and higher catalytic stability than natural enzymes. Among various nanomaterials, two-dimensional (2D) nanomaterials exhibit promising enzyme-like properties for a plethora of bioapplications owing to their unique physicochemical characteristics of tuneable composition, ultrathin thickness, and huge specific surface area. Herein, we review the recent advances in several 2D material-based nanozymes, such as carbonaceous nanosheets, metal-organic frameworks (MOFs), transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and transition metal oxides (TMOs), clarify the mechanisms of peroxidase (POD)-mimicking catalytic behaviors, and overview the potential bioapplications of 2D nanozymes.

Preparation of a nonenzymatic electrochemical sensor based on g-C3N4/MWO4 (M: Cu, Mn, ‎Co, Ni) composite for the determination of H2O2‎

‎ Hydrogen peroxide (H2O2) has a significant effect on physiological proceedings. In the ‎present research, a g-C3N4-based nanocomposite g-C3N4/MWO4(M: Cu, Mn, Co, Ni) was ‎prepared via the precipitation-calcination method. A...

A graphene-printed paper electrode for determination of H2O2 in municipal wastewater during the COVID-19 pandemic

Graphene prepared through exfoliation process was printed on paper substrate using inkjet-printer and then printed paper electrode was used as an electrochemical sensor for analysis of H2O2 in cyclic voltammetry.

Graphene-PtPd nanocomposite for low-potential-driven electrochemiluminescent determination of carcinoembryonic antigen using Ru(bpy)32

As well known, the electrochemiluminescence (ECL) of tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) heavily relies on highly positive or negative triggered voltage, prejudicing the detection toward the bio-molecules. In this work, Ru(bpy)₃²⁺ could generate enhanced and stable ECL at a low potential of 0.05 V (vs. Ag/AgCl) on graphene-PtPd hybrid, attributing to its excellent electrocatalysis from the synergistic effect between Pt and Pd. The obtained low-potential-driven ECL could be quenched by MoS₂ nanoflowers. Based on the quenching effect, a sandwich "signal-off" ECL immunosensor was fabricated to sensitively detect carcinoembryonic antigen (CEA). A linear calibration curve from 1 fg mL^-1 to 1 ng mL^-1 was obtained along with a low detection limit of 0.54 fg mL^-1 (S/N = 3) under optimal conditions. The sensor showed satisfactory specificity, stability, and reproducibility and was successfully applied to determine CEA in actual samples. The recoveries ranged from 98.80 to 100.23%, and the relative standard deviation (RSD) was lower than 5%. Above all, this work explored new materials in low-potential-driven ECL system and provided a reliable sensing strategy for clinical applications.

Development of Au-Pd@UiO-66-on-ZIF-L/CC as a self-supported electrochemical sensor for in situ monitoring of cellular hydrogen peroxide

Integrating metal-organic frameworks (MOFs) of different components or structures together and exploiting them as electrochemical sensors for electrochemical sensing has aroused great interest. Furthermore, the incorporation of noble metals with MOFs is conducive to the improvement of catalytic performance. In this work, Pd@UiO-66-on-ZIF-L nanomaterials were successfully synthesised onto a self-supported flexible carbon cloth (Pd@UiO-66-on-ZIF-L/CC) through a novel strategy called MOF-on-MOF. Then, Au nanoparticles were electrodeposited onto Pd@UiO-66-on-ZIF-L/CC to obtain Au-Pd@UiO-66-on-ZIF-L/CC, which can serve as an excellent electrocatalyst for the reduction of hydrogen peroxide (H₂O₂). The obtained flower-like Pd@UiO-66-on-ZIF-L/CC hybrid MOF changes the structure of the monomeric MOF alone and adds more attachment sites. The synergy of the bimetals greatly improved the catalytic performance of the as-developed sensor. Electrochemical experiment results show that the proposed sensor based on Au-Pd@UiO-66-on-ZIF-L/CC has an extended linear range from 1 μM to 19.6 mM with a sensitivity of 390 μA mM^-1 cm^-2, and a low limit of detection (LOD) of 21.2 nM (S/N = 3). Moreover, it has good anti-interference, reproducibility, repeatability and excellent stability. Furthermore, the real-time in situ detection of H₂O₂ secreted from human adenocarcinomic alveolar basal epithelial cells (A549 cells) was achieved by culturing cells on Au-Pd@UiO-66-on-ZIF-L/CC, which indicates the potential of the sensor for applications in cancer pathology. Both the synthesis strategy and the sensor design provide new methods and ideas for the production of ultrasensitive H₂O₂ electrochemical sensors.

Electrochemical sensing of hydrogen peroxide on a carbon paste electrode modified by a silver complex based on the 1,3-bis(1H-benzimidazole-2-yl)propane ligand

A new carbon paste electrode (Ag-CPE) modified with a nitrogen heterocyclic silver(I) complex, [Ag2(BBP)2](pic)2·CH3OH (BBP = 1,3-bis(1H-benzimidazol-2-yl)propane, pic = picrate), was developed as a highly sensitive and simple electrochemical sensor for the determination of hydrogen peroxide. The Ag(I) complex was prepared by an interface reaction and characterized by elemental analysis, IR and UV/Vis spectra and single crystal X-ray diffraction. The Ag(I) complex shows a dinuclear cluster structure, which is formed by two BBP ligands bridging two Ag (I) centers and an Ag–Ag interaction (d Ag–Ag = 3.0875 Å). Cyclic voltammetry and chronoamperometry studies showed that the electrochemical sensing performance of Ag-CPE for H2O2 was improved in 0.2 m phosphate buffer solution (PBS, pH = 6). The electrochemical H2O2 sensor Ag-CPE exhibits a wide linear detection range from 0.5 to 4.0 mm and a lower detection limit of 0.39 μm with a relatively high sensitivity of 6.77 μA mm −1. Moreover, the sensor also shows good anti-interference properties and stability. The results prove that the Ag(I) complex based on the bis(benzimidazole) ligand may be an efficient component of electrode materials.

Simple and fast colorimetric and electrochemical methods for the ultrasensitive detection of glucose

Developing ultrasensitive and user-friendly methods for the detection glucose has attracted more and more attention. By virtue of high selectivity and sensitivity, enzyme-based glucose sensor plays a key role in point-of-care sensing technology for detecting glucose concentration. In this study, Amplex Red (AR), as both indicator and mediator, was investigated to detect glucose in presence of glucose oxidase (GOx) enzymes using colorimetric and electrochemical methods. Without using any advanced techniques and sophisticated nanomaterials, 1 μM glucose can be easily detected through simply detecting the solution color with a visual colorimetric method. On the other hand, the electrochemical method can provide much higher sensitivity for the detection of glucose, which achieves a linear range spanning from 20 nM to 3.56 μM with a limit of 7.3 nM (signal-to-noise ratio SNR = 3). It is also found that the presence of other sugars such as fructose, lactose, and maltose have very limited interference effects on the detection of glucose. More importantly, a bare GC electrode was used in all these electrochemical measurements without any electrode surface modification, guaranteeing a simple and fast operation. The analytical platforms for the detection of glucose presented here not only provide simple, fast, and ultrasensitive methods, but also have the potential to advance the sensing technology in the application of other health diagnostic research areas. Amplex Red (AR) was reported as both an indicator and mediator for the sensitive and specific determination of glucose using the colorimetric and electrochemical methods. The detection limit was 1 μM glucose by the visual colorimetric methods. A bare glassy carbon electrode without any functional modification was employed for the detection as low as 20 nM glucose with LOD of 7.3 nm (SNR = 3) in the electrochemical method.

A metal-organic framework with multienzyme activity as a biosensing platform for real-time electrochemical detection of nitric oxide and hydrogen peroxide

A Metal-Organic Framework (MOFs) with large surface area, exposed active site, excellent catalytic performance and high chemical stability has been used as an artificial enzyme and designed for nonenzymatic electrochemical sensors. Here, a strategy of using an enhanced electrochemical sensing platform for the detection of nitic oxide (NO) and hydrogen peroxide (H2O2) was designed via a nano-metalloporphyrinic metal-organic framework (NporMOF(Fe)) as an electrode material. By taking advantage of the small size, high surface area and exposed Fe active site, the obtained NporMOF(Fe) displays excellent electrocatalytic activity toward NO and H2O2. The NporMOF(Fe) modified electrode shows high sensing ability toward the in situ generated NO in NO2- containing phosphate buffer (PB) solution with a wide linear detection range of 5 μM to 200 μM and a very low detection limit of 1.3 μM. Moreover, NporMOF(Fe) exhibits high electrocatalytic activity toward the reduction of H2O2 and the practical detection of H2O2 released from HeLa cells. Furthermore, the NporMOF(Fe) modified electrode shows excellent selectivity toward the detection of NO and H2O2 in the presence of other physiologically important analytes. This method shows excellent biosensing performance, implying the universal applicability of MOFs-based artificial nanozymes for biosensors and the potential application for third generation biosensors.

Janus Nanoparticles: From Fabrication to (Bio)Applications

Janus nanoparticles (JNPs) refer to the integration of two or more chemically discrepant composites into one structure system. Studies into JNPs have been of significant interest due to their interesting characteristics stemming from their asymmetric structures, which can integrate different functional properties and perform more synergetic functions simultaneously. Herein, we present recent progress of Janus particles, comprehensively detailing fabrication strategies and applications. First, the classification of JNPs is divided into three blocks, consisting of polymeric composites, inorganic composites, and hybrid polymeric/inorganic JNPs composites. Then, the fabrication strategies are alternately summarized, examining self-assembly strategy, phase separation strategy, seed-mediated polymerization, microfluidic preparation strategy, nucleation growth methods, and masking methods. Finally, various intriguing applications of JNPs are presented, including solid surfactants agents, micro/nanomotors, and biomedical applications such as biosensing, controlled drug delivery, bioimaging, cancer therapy, and combined theranostics. Furthermore, challenges and future works in this field are provided.

Electrochemical sensor based on the Mn3O4/CeO2 nanocomposite with abundant oxygen vacancies for highly sensitive detection of hydrogen peroxide released from living cells

Based on the strategy of increasing the number of oxygen vacancies to improve the catalytic performance, we have developed a novel electrochemical sensor based on the multivalent metal oxides cerium dioxide and manganous oxide (Mn₃O₄/CeO₂) for reliable determination of extracellular hydrogen peroxide (H₂O₂) released from living cells. The Mn₃O₄/CeO₂ nanocomposite was characterized by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical performance of the Mn₃O₄/CeO₂ nanocomposite modified glassy carbon electrode (Mn₃O₄/CeO₂/GCE) was investigated. Owing to the abundant oxygen vacancies and strong synergistic effect between the multivalent Ce and Mn, the sensor exhibited excellent catalytic activity and selectivity for the electrochemical detection of H₂O₂ with a low quantitation limit of 2 nM. Moreover, Mn₃O₄/CeO₂/GCE exhibited excellent reproducibility, repeatability, and long-term storage stability. Because of these remarkable analytical advantages, the constructed sensor was able to determine H₂O₂ released from living cells with satisfactory results. The results showed that the Mn₃O₄/CeO₂ sensor is a promising candidate for a nanoenzymatic H₂O₂ sensor with the possibility of applications in physiology and diagnosis.

Fe3C-Assisted Single Atomic Fe Sites for Sensitive Electrochemical Biosensing

The rational construction of advanced sensing platforms to sensitively detect H₂O₂ produced by living cells is one of the challenges in both physiological and pathological fields. Owing to the extraordinary catalytic performances and similar metal coordination to natural metalloenzymes, single atomic site catalysts (SASCs) with intrinsic peroxidase (POD)-like activity have shown great promise for H₂O₂ detection. However, there still exists an obvious gap between them and natural enzymes because of the great challenge in rationally modulating the electronic and geometrical structures of central atoms. Note that the deliberate modulation of the metal-support interaction may give rise to the promising catalytic activity. In this work, an extremely sensitive electrochemical H₂O₂ biosensor based on single atomic Fe sites coupled with carbon-encapsulated Fe₃C crystals (Fe₃C@C/Fe-N-C) is proposed. Compared with the conventional Fe SASCs (Fe-N-C), Fe₃C@C/Fe-N-C exhibits superior POD-like activity and electrochemical H₂O₂ sensing performance with a high sensitivity of 1225 μA/mM·cm², fast response within 2 s, and a low detection limit of 0.26 μM. Significantly, sensitive monitoring of H₂O₂ released from living cells is also achieved. Moreover, the density functional theory calculations reveal that the incorporated Fe₃C nanocrystals donate electrons to single atomic Fe sites, endowing them with improved activation ability of H₂O₂ and further enhancing the overall activity. This work provides a new design of synergistically enhanced single atomic sites for electrochemical sensing applications.

Molybdenum-containing polypyrrole self-supporting hollow flexible electrode for hydrogen peroxide detection in living cells

A flexible electrode based on polypyrrole-supported free-standing molybdenum oxide-molybdenum disulfide/polypyrrole nanostructure (MoO₃-MoS₂/PPy) was synthesized. The petal-like MoO₃-MoS₂ sheets grown on PPy were prepared step by step through simple electrodeposition and hydrothermal methods. The corresponding surface morphological and structural characterizations were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results showed that the prepared petal MoO₃-MoS₂ hybrid nanomaterials were uniformly distributed on the PPy skeleton and exhibited a three-dimensional porous network structure. The flexible electrode was used for non-enzymatic detection of hydrogen peroxide (H₂O₂), and the developed MoO₃-MoS₂/PPy nanomaterials exhibited high electrochemical sensing performance in the range of 0.3-150 μM, with the detection limit of 0.18 μM (S/N = 3). The excellent detection properties enabled the MoO₃-MoS₂/PPy flexible electrode to detect H₂O₂ released by living cells. The resulting MoO₃-MoS₂/PPy flexible electrode also has the advantages of customizable shape and adjustability, which provides a potential platform for constructing clinically diagnosed in vivo portable instruments and real-time environmental monitoring.

Synergetic enhancement of electrochemical H2O2 detection in a nitrogen-doped carbon encapsulated FeCo alloy architecture

The development of Earth-abundant metal-based non-enzymatic electrodes with ultralow metal loadings for the efficient detection of hydrogen peroxide (H₂O₂) is highly desirable. We report here a remarkable three-dimensional nitrogen-doped porous carbon (NPC) encapsulated Earth-abundant metal architecture, i.e., NPC encapsulating FeCo alloy nanoparticles toward highly efficient electrochemical H₂O₂ detection. Specifically, an Fe_0.06Co_0.04@NPC-950 modified electrode can show excellent electrochemical performance for non-enzymatic H₂O₂ sensing in neutral media, with a wide linear range of 0.004 to 8 mM, a high sensitivity of 794 μA mA^-1 cm^-2 and a low limit of detection (LOD) of 0.13 μM, outperforming most of the reported non-noble metal electrocatalysts. Meanwhile, the fabricated Fe_0.06Co_0.04@NPC-950 modified electrode is capable of real-time monitoring of H₂O₂ in commercial orange juice, milk and serum, revealing its application potential toward the accurate detection of H₂O₂ in real-sample analysis. This electrode also has high selectivity, long-term stability and good reproducibility. Its excellent performance is correlated with the synergetic catalysis of the FeCo alloy, nitrogen-rich NPC with a large specific surface area (SSA) and the core-shell structure protecting the active sites from corrosion. This study offers an efficient pathway for developing high-performance and Earth-abundant catalysts toward electrochemical H₂O₂ detection.

Gold nanoparticles plated porous silicon nanopowder for nonenzymatic voltammetric detection of hydrogen peroxide

A voltammetric approach was developed for the selective and sensitive determination of hydrogen peroxide using Au plated porous silicon (PSi) nanopowder modified glassy carbon electrode (GCE). The AuNPs-PSi hybrid structure was synthesized via stain etching procedure followed by an immersion plating method to deposit AuNPs onto PSi via a simple galvanic displacement reaction with no external reducing agent to convert Au³⁺ to Au⁰. The as-fabricated AuNPs-PSi catalyst was successfully characterized by XRD, Raman, FTIR, XPS, SEM, TEM and EDS techniques. Well crystalline nature of the as-fabricated hybrid structure with AuNPs size ranging from 5 to 40 nm was observed. The specific surface area and total pore volume for both PSi and AuNPs plated PSi were evaluated using N₂ adsorption isotherm technique. Cyclic voltammetry and electrochemical impedance spectroscopy techniques were applied to investigate the catalytic efficiency of AuNPs-PSi modified electrode compared to pure PSi/GCE and unmodified GCE. The sensing performance of the active material modified GCE was thoroughly examined with linear sweep voltammetry (LSV) and square wave voltammetry (SWV) techniques. The AuNPs-PSi/GCE exhibited a remarkable linear dynamic range between 2.0 and 13.81 mM (for LSV) and 0.5-6.91 mM for (SWV) with high sensitivity and low detection limit of 10.65 μAmM^-1cm^-2 and 14.84 μM for LSV, whereas 10.41 μAmM^-1cm^-2 and 15.16 μM using SWV techniques, respectively. The fabricated sensor electrode showed excellent anti-interfering ability in the presence of several common biomolecules as well as demonstrated good operational stability and reproducibility with low relative standard deviation. Moreover, the modified electrode showed acceptable recovery of H₂O₂ in a real sample analysis. Thus, the developed AuNPs-PSi hybrid nanomaterial represents an excellent electrocatalyst for the efficient detection and quantification of H₂O₂ by the electrochemical approach.

Synthesis of a CuNP/chitosan/black phosphorus nanocomposite for non-enzymatic hydrogen peroxide sensing

A copper-chitosan-black phosphorus nanocomposite (CuNPs-Chit-BP) was fabricated by electrochemically depositing copper nanoparticles onto a black phosphorus-modified glassy carbon electrode in chitosan solution. CuNPs demonstrated a uniform distribution on the Chit-BP modified GCE with an average size of 20 nm. Electrochemical methods were used to study the catalytic activity of the CuNPs-Chit-BP nanocomposite toward hydrogen peroxide. The results showed that the synthesized nanocomposite exhibited excellent electrical conductivity, good biocompatibility and highly efficient electrocatalytic activity toward hydrogen peroxide reduction in the range of 10 μM-10.3 mM with a detection limit of 0.390 μM. The present work proposed a new strategy to explore novel BP-based non-enzymatic biosensing platforms.

Engineering Inorganic Nanoflares with Elaborate Enzymatic Specificity and Efficiency for Versatile Biofilm Eradication

Nanozyme has emerged as a versatile nanocatalyst yet is constrained with limited catalytic efficiency and specificity for various biomedical applications. Herein, by elaborately integrating the recognition/transduction carbon dots (CDs) with platinum nanoparticles (PtNPs), an exquisite CDs@PtNPs (CPP) nanoflare is engineered as an efficient and substrate-specific peroxidase-mimicking nanozyme for high-performance biosensing and antibacterial applications. The intelligent CPP-catalyzed hydrogen peroxide (H₂ O₂ )-generated reactive oxygen species realize the sensitive diagnosis-guided enhanced disinfection of pathogens. Significantly, the CPP nanozyme shows the prominent biofilm eradication and wound healing in vivo by virtue of endogenous H₂ O₂ in acidic infection tissues, which can substantially preclude the annoying antibiotics resistance. A fundamental understanding on the present CPP nanoflare would not only facilitate the advancement of various prospective biocatalysts, but also establish a multifunctional means for versatile biosensing and smart diagnostic applications.

A 3D-graphene fiber electrode embedded with nitrogen-rich-carbon-coated ZIF-67 for the ultrasensitive detection of adrenaline

A novel nitrogen-rich-carbon-coated ZIF-67 embedded three-dimensional-graphene (ZIF-67/NC/3DG) fiber was fabricated via a facile one-pot electrodeposition self-assembly method, and used as a prominent electrode for the non-enzymatic detection of adrenaline (Ad). In this design, the prepared ZIF-67 adsorbs Ad through hydrogen bonding and electrostatic interaction, while polypyrrole functions as the precursor of the conductive NC that seamlessly connects ZIF-67 with the 3DG fiber electrode to ameliorate the poor conductivity of the ZIF-67 moiety and thus improve the sensitivity of the ZIF-67/NC/3DG fiber electrode for detecting Ad. The constructed fiber sensor shows a double linear response over the Ad concentration range of 0.06-95 μM with a high sensitivity of 44.6 mA mM-1 cm-2 and 95.0-5900 μM with a good sensitivity of 11.0 mA mM-1 cm-2, giving a low detection limit of 0.02 μM and excellent repeatability. The ZIF-67/NC/3DG fiber electrode was further successfully applied for the determination of Ad in a real sample of human serum, indicating that this fiber electrode is a promising miniaturized sensor for electrochemical analysis.

Highly dispersed Pt nanoparticles on ultrasmall EMT zeolite: A peroxidase-mimic nanoenzyme for detection of H2O2 or glucose

In past decade, Pt-based nanomaterials as peroxidase mimics have attracted much attention for H₂O₂ and glucose detection. However, easy aggregation of Pt nanoparticles (Pt NPs) greatly decreases their peroxidase-like activity. In this work, novel Pt/EMT nanocomposites were prepared by uniformly loading Pt NPs (5-8 nm) onto the support of ultrasmall EMT zeolite (15-20 nm), a kind of low-silica microporous aluminosilicate material. The hybrid Pt/EMT nanomaterials could be well dispersed in water to form a homogeneous suspension, and were then utilized as a superior peroxidase-like catalyst for oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H₂O₂). The optimal catalyst of 2.6Pt/EMT nanocomposite exhibited excellent catalytic performance toward H₂O₂ and TMB than natural enzyme of horseradish peroxidase (HRP) by using a steady-state kinetic analysis based on the typical Michaelis-Menten kinetics theory. The peroxidase-like catalyst showed a promising activity in a wide pH and temperature range as well as the long-term stability. A facile and reliable colorimetric assay based on the peroxidase mimic of Pt/EMT nanocomposite was constructed for precise detection of H₂O₂ and glucose in a wide linear range, with low limits of detection of 1.1 μM and 13.2 μM, respectively. Due to high selectivity to glucose against other sugars on the catalyst, the method was demonstrated to accurately measure the concentration of glucose in real samples including human blood serum and fruit juices, indicating a potential application of the Pt/EMT nanocomposites as a robust peroxidase mimic and a reliable biosensor in the fields of clinical diagnosis, pharmaceutical, food research and so on.