Nanocomposite gold-silk nanofibers

From Nanoscale to Macroscale Characterization of Sulfur-Modified Oxidized Carbon Nanotubes in Styrene Butadiene Rubber Compounds

The homogeneous dispersion of carbon nanotubes (CNTs) in a rubber matrix is a key factor limiting their amazing potential. CNTs tend to agglomerate into bundles due to van der Waals interactions. To overcome this limitation, CNTs have been surface-modified with oxygen-bearing groups and sulfur. Using atomic force microscopy (AFM) techniques, a deep nanoscale characterization of the morphology, the degree of dispersion of the CNTs in the styrene butadiene rubber (SBR) matrix, and the thickness of the interfacial layer was carried out in this study. In this context, the results from nanoscale characterization showed that the thermal oxidation-sulfur treatment leads to a composite with better dispersion in the matrix, as well as a thicker interfacial layer, indicating a stronger filler-rubber interaction. The second part of this work focused on the macroscale results, such as the Payne effect, vulcanization curves, and mechanical properties. The Payne effect, vulcanization curves, and mechanical properties confirmed the lower reinforcing effect observed in the case of the chemical oxidation treatment because, on the one hand, this composite showed the highest agglomeration of CNTs after the acid treatment. On the other hand, the presence of acid residues provoked the absorption of basic accelerators on the surface of the CNTs.

Design of IKVAV peptide/gold nanoparticle decorated, micro/nano-channeled PCL/PLGA film scaffolds for neuronal differentiation and neurite outgrowth

In the field of neural tissue engineering, intensive efforts are being made to develop tissue scaffolds that can support an effective functional recovery and neural development by guiding damaged axons and neurites. Micro/nano-channeled conductive biomaterials are considered a promising approach for repairing the injured neural tissues. Many studies have demonstrated that the micro/nano-channels and aligned nanofibers could guide the neurites to extend along the direction of alignment. However, an ideal biocompatible scaffold containing conductive arrays that could promote effective neural stem cell differentiation and development, and also stimulate high neurite guidance has not been fully developed. In the current study, we aimed to fabricate micro/nano-channeled polycaprolactone (PCL)/Poly-d,l-lactic-co-glycolic acid (PLGA) hybrid film scaffolds, decorate their surfaces with IKVAV pentapeptide/gold nanoparticles (AuNPs), and investigate the behavior of PC12 cells and neural stem cells (NSCs) on the developed biomaterial under static/bioreactor conditions. Here we show that channeled groups decorated with AuNPs highly promote neurite outgrowth and neuronal differentiation along linear lines in the presence of electrical stimulation, compared with the polypyrrole (PPy) coating, which has been used traditionally for many years. Hopefully, this newly developed channeled scaffold structure (PCL/PLGA-AuNPs-IKVAV) could help to support long-distance axonal regeneration and neuronal development after different neural damages.

Gold nanorods decorated polycaprolactone/cellulose acetate hybrid scaffold for PC12 cells proliferation

Synthetic and natural polymers have recently received considerable attention due to the exclusive potential for supporting the regenerative cellular processes in peripheral nerve injuries (PNIs). Gold nanorods (GNRs) decorated polycaprolactone (PCL)/cellulose acetate (CA) nanocomposite (PCL/CA/GNR) were fabricated via electrospinning to improve PC12 cells attachment and growth or scaffold cues. Transmission electron microscopy (TEM) corroborated the GNR distribution (23 ± 2 nm length and 3/1 Aspect ratio) and suitable average dimension of 800 nm for the fibers; also, scanning electron microscopy (SEM) represented block-free and smooth fibers without perturbation. Because of gold nanorods incorporation, electrical conductivity of PCL/CA/GNR increased ~21%. Water contact angle data emphasized PCL/CA/GNR surface is more wettable that PCL/CA (<90° at 62 s). Real-time PCR technique (RT-PCR) demonstrated overexpression of β-tubulin and microtubule-associated protein 2 (MAP2) on PCL/CA/GNR compared to PCL/CA composite. Additionally, evaluated of the maturation and neurogenic differentiation of PC12 cells emphasized overexpression of nestin and β-tubulin by Immunocytochemistry staining onto PCL/CA/GNR in comparison to PCL/CA composite. Notably, these recently developed hybrid scaffolds could be considered for peripheral nerve injury (PNI) regeneration.

New Silk Road: From Mesoscopic Reconstruction/Functionalization to Flexible Meso-Electronics/Photonics Based on Cocoon Silk Materials

Two of the key questions to be addressed are whether and how one can turn cocoon silk into fascinating materials with different electronic and optical functions so as to fabricate the flexible devices. In this review, a comprehensive overview of the unique strategy of mesoscopic functionalization starting from silk fibroin (SF) materials to the fabrication of various meso flexible SF devices is presented. Notably, SF materials with novel and enhanced properties can be achieved by mesoscopically reconstructing the hierarchical structures of SF materials. This is based on rerouting the refolding process of SF molecules by meso-nucleation templating. As-acquired functionalized SF materials can be applied to fabricate bio-compatible/degradable flexible/implantable meso-optical/electronic devices of various types. Consequently, functionalized SF can be fabricated into optical elements, that is, nonlinear photonic and fluorescent components, and make it possible to construct silk meso-electronics with high-performance. These advances enable the applications of SF-material based devices in the areas of physical and biochemical sensing, meso-memristors, transistors, brain electrodes, and energy generation/storage, applicable to on-skin long-term monitoring of human physiological conditions, and in-body sensing, information processing, and storage.

Combination of Porous Silk Fibroin Substrate and Gold Nanocracks as a Novel SERS Platform for a High-Sensitivity Biosensor

Novel concepts for developing a surface-enhanced Raman scattering (SERS) sensor based on biocompatible materials offer great potential in versatile applications, including wearable and in vivo monitoring of target analytes. Here, we report a highly sensitive SERS sensor consisting of a biocompatible silk fibroin substrate with a high porosity and gold nanocracks. Our silk-based SERS detection takes advantage of strong local field enhancement in the nanoscale crack regions induced by gold nanostructures evaporated on a porous silk substrate. The SERS performance of the proposed sensor is evaluated in terms of detection limit, sensitivity, and linearity. Compared to the performance of a counterpart SERS sensor with a thin gold film, SERS results using 4-ABT analytes present that a significant improvement in the detection limit and sensitivity by more than 4 times, and a good linearity and a wide dynamic range is achieved. More interestingly, overlap is integral, and a quantitative measure of the local field enhancement is highly consistent with the experimental SERS enhancement.

Protein and Polysaccharide-Based Electroactive and Conductive Materials for Biomedical Applications

Electrically responsive biomaterials are an important and emerging technology in the fields of biomedical and material sciences. A great deal of research explores the integral role of electrical conduction in normal and diseased cell biology, and material scientists are focusing an even greater amount of attention on natural and hybrid materials as sources of biomaterials which can mimic the properties of cells. This review establishes a summary of those efforts for the latter group, detailing the current materials, theories, methods, and applications of electrically conductive biomaterials fabricated from protein polymers and polysaccharides. These materials can be used to improve human life through novel drug delivery, tissue regeneration, and biosensing technologies. The immediate goal of this review is to establish fabrication methods for protein and polysaccharide-based materials that are biocompatible and feature modular electrical properties. Ideally, these materials will be inexpensive to make with salable production strategies, in addition to being both renewable and biocompatible.

Silk fibroin nanocomposites as tissue engineering scaffolds - A systematic review

Silk fibroin is a protein with intrinsic characteristics that make it a good candidate as a scaffold for tissue engineering. Recent works have enhanced its benefits by adding inorganic phases that interact with silk fibroin in different ways. A systematic review was performed in four databases to study the physicochemical and biological performance of silk fibroin nanocomposites. In the last decade, only 51 articles contained either in vitro cell culture models or in vivo tests. The analysis of such works resulted in their classification into the following scaffold types: particles, mats and textiles, films, hydrogels, sponge-like structures, and mixed conformations. From the physicochemical perspective, the inorganic phase imbued in silk fibroin nanocomposites resulted in better stability and mechanical performance. This review revealed that the inorganic phase may be associated with specific biological responses, such as neovascularisation, cell differentiation, cell proliferation, and antimicrobial and immunomodulatory activity. The study of nanocomposites as tissue engineering scaffolds is a highly active area mostly focused on bone and cartilage regeneration with promising results. Nonetheless, there are still many challenges related to their application in other tissues, a better understanding of the interaction between the inorganic and organic phases, and the associated biological response.

Gold, Silver, and Iron Oxide Nanoparticle Incorporation into Silk Hydrogels for Biomedical Applications: Elaboration, Structure, and Properties

Silk fibroin (SF) is a versatile material with biodegradable and biocompatible properties, which make it fit for broad biomedical applications. In this context, the incorporation of nanosized objects into SF allows the development of a variety of bionanocomposites with tailored properties and functions. Herein, we report a thorough investigation on the design, characterization, and biological evaluation of SF hydrogels incorporating gold, silver, or iron oxide nanoparticles. The latter are synthesized in aqueous media using a biocompatible ligand allowing their utilization in various biomedical applications. This ligand seems to play a pivotal role in nanoparticle dispersion within the hydrogel. Results show that the incorporation of nanoparticles does not greatly influence the mechanism of SF gelation and has a minor impact on the mechanical properties of the so-obtained bionanocomposites. By contrast, significant changes are observed in the swelling behavior of these materials, depending on the nanoparticle used. Interestingly, the main characteristics of these bionanocomposites, related to their potential use for biomedical purposes, show the successful input of nanoparticles, including antibacterial properties for gold and silver nanoparticles and magnetic properties for iron oxide ones.

Fabrication and evaluation of porous and conductive nanofibrous scaffolds for nerve tissue engineering

Peripheral nerve repair is still one of the major clinical challenges which has received a great deal of attention. Nerve tissue engineering is a novel treatment approach that provides a permissive environment for neural cells to overcome the constraints of repair. Conductivity and interconnected porosity are two required characteristics for a scaffold to be effective in nerve regeneration. In this study, we aimed to fabricate a conductive scaffold with controlled porosity using polycaprolactone (PCL) and chitosan (Chit), FDA approved materials for the use in implantable medical devices. A novel method of using tetrakis (hydroxymethyl) phosphonium chloride (THPC) and formaldehyde was applied for in situ synthesis of gold nanoparticles (AuNPs) on the scaffolds. In order to achieve desirable porosity, different percentage of polyethylene oxide (PEO) was used as sacrificial fiber. Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM) results demonstrated the complete removing of PEO from the scaffolds after washing and construction of interconnected porosities, respectively. Elemental and electrical analysis revealed the successful synthesis of AuNPs with uniform distribution and small average diameter on the PCL/Chit scaffold. Contact angle measurements showed the effect of porosity on hydrophilic properties of the scaffolds, where the porosity of 75-80% remarkably improved surface hydrophilicity. Finally, the effect of conductive nanofibrous scaffold on Schwann cells morphology and vaibility was investigated using FE-SEM and MTT assay, respectively. The results showed that these conductive scaffolds had no cytotoxic effect and support the spindle-shaped morphology of cells with elongated process which are typical of Schwann cell cultures.

Biopolymer Nanofibers for Nanogenerator Development

The development of nanogenerators (NGs) with optimal performances and functionalities requires more novel materials. Over the past decade, biopolymer nanofibers (BPNFs) have become critical sustainable building blocks in energy-related fields because they have distinctive nanostructures and properties and can be obtained from abundant and renewable resources. This review summarizes recent advances in the use of BPNFs for NG development. We will begin by introducing various strategies for fabricating BPNFs with diverse structures and performances. Then, we will systematically present the utilization of polysaccharide and protein nanofibers for NGs. We will mainly focus on the use of BPNFs to generate bulk materials with tailored structures and properties for assembling of triboelectric and piezoelectric NGs. The use of BPNFs to construct NGs for the generation of electricity from moisture and osmosis is also discussed. Finally, we illustrate our personal perspectives on several issues that require special attention with regard to future developments in this active field.

Silk Polymers and Nanoparticles: A Powerful Combination for the Design of Versatile Biomaterials

Silk fibroin (SF) is a natural protein largely used in the textile industry but also in biomedicine, catalysis, and other materials applications. SF is biocompatible, biodegradable, and possesses high tensile strength. Moreover, it is a versatile compound that can be formed into different materials at the macro, micro- and nano-scales, such as nanofibers, nanoparticles, hydrogels, microspheres, and other formats. Silk can be further integrated into emerging and promising additive manufacturing techniques like bioprinting, stereolithography or digital light processing 3D printing. As such, the development of methodologies for the functionalization of silk materials provide added value. Inorganic nanoparticles (INPs) have interesting and unexpected properties differing from bulk materials. These properties include better catalysis efficiency (better surface/volume ratio and consequently decreased quantify of catalyst), antibacterial activity, fluorescence properties, and UV-radiation protection or superparamagnetic behavior depending on the metal used. Given the promising results and performance of INPs, their use in many different procedures has been growing. Therefore, combining the useful properties of silk fibroin materials with those from INPs is increasingly relevant in many applications. Two main methodologies have been used in the literature to form silk-based bionanocomposites: in situ synthesis of INPs in silk materials, or the addition of preformed INPs to silk materials. This work presents an overview of current silk nanocomposites developed by these two main methodologies. An evaluation of overall INP characteristics and their distribution within the material is presented for each approach. Finally, an outlook is provided about the potential applications of these resultant nanocomposite materials.

Advances and clinical challenges for translating nerve conduit technology from bench to bed side for peripheral nerve repair

Injuries to the peripheral nervous system remain a large-scale clinical problem. These injuries often lead to loss of motor and/or sensory function that significantly affects patients' quality of life. The current neurosurgical approach for peripheral nerve repair involves autologous nerve transplantation, which often leads to clinical complications. The most pressing need is to increase the regenerative capacity of existing tubular constructs in the repair of large nerve gaps through development of tissue-engineered approaches that can surpass the performance of autografts. To fully realize the clinical potential of nerve conduit technology, there is a need to reconsider design strategies, biomaterial selection, fabrication techniques and the various potential modifications to optimize a conduit microenvironment that can best mimic the natural process of regeneration. In recent years, a significant progress has been made in the designing and functionality of bioengineered nerve conduits to bridge long peripheral nerve gaps in various animal models. However, translation of this work from lab to commercial scale has not been achieve. The current review summarizes recent advances in the development of tissue engineered nerve guidance conduits (NGCs) with regard to choice of material, novel fabrication methods, surface modifications and regenerative cues such as stem cells and growth factors to improve regeneration performance. Also, the current clinical potential and future perspectives to achieve therapeutic benefits of NGCs will be discussed in context of peripheral nerve regeneration.

Improving the Activity of DNA-Encoded Sensing Elements through Confinement in Silk Microcapsules

Assembling synthetic bioparts into simplified artificial cells holds tremendous promise for advancing studies into the synthesis, biosensing, and delivery of biomolecules. Currently, the most successful techniques for encapsulation of the transcription-translation machinery exploit compartmentalization in liposomal vesicles. However, improvements to these methods may increase permeability to polar molecules, functionalization of the membrane with biologically active elements, and encapsulation efficiency. Microcapsules prepared via templated layer-by-layer (LbL) assembly using natural polymers have the potential to resolve some of the hurdles associated with liposomes. Here, we introduce a design for immobilizing DNA templates encoding translationally activated riboswitches and RNA aptamers into microcapsules prepared from regenerated silk fibroin protein. Adjusting several key parameters such as the presence of a polymer primer, concentration of silk protein, and DNA loadings during LbL assembly resulted in biocompatible, semipermeable, DNA-laden microcapsules. To preserve bioactivity, DNA was immobilized inside of the capsule membrane, which not only promoted stability during long-term storage at ambient conditions but also improved output response from spatially confined DNA-encoded sensing elements (SEs). Multiple copies of mRNA and GFPa1 protein were synthesized upon activation with specific analytes during in vitro transcription/translation reactions, demonstrating that selective permeability of silk microcapsules was essential for the diffusion of components of the cell-free system inside of the capsules. Further functionalization of capsule shells with gold nanoparticles (AuNPs) and antibodies (IgG) demonstrated the applicability of microcompartmentalized colloidal objects carrying SEs for remote sensing and/or targeted delivery. In the future, multifunctional, biocompatible silk-based microcapsules loaded with different RNA sensors can help advance the design of multiplexed biosensors tracking multiple biomarkers in complex media.

Protein and Polysaccharide-Based Fiber Materials Generated from Ionic Liquids: A Review

Natural biomacromolecules such as structural proteins and polysaccharides are composed of the basic building blocks of life: amino acids and carbohydrates. Understanding their molecular structure, self-assembly and interaction in solvents such as ionic liquids (ILs) is critical for unleashing a flora of new materials, revolutionizing the way we fabricate multi-structural and multi-functional systems with tunable physicochemical properties. Ionic liquids are superior to organic solvents because they do not produce unwanted by-products and are considered green substitutes because of their reusability. In addition, they will significantly improve the miscibility of biopolymers with other materials while maintaining the mechanical properties of the biopolymer in the final product. Understanding and controlling the physicochemical properties of biopolymers in ionic liquids matrices will be crucial for progress leading to the ability to fabricate robust multi-level structural 1D fiber materials. It will also help to predict the relationship between fiber conformation and protein secondary structures or carbohydrate crystallinity, thus creating potential applications for cell growth signaling, ionic conductivity, liquid diffusion and thermal conductivity, and several applications in biomedicine and environmental science. This will also enable the regeneration of biopolymer composite fiber materials with useful functionalities and customizable options critical for additive manufacturing. The specific capabilities of these fiber materials have been shown to vary based on their fabrication methods including electrospinning and post-treatments. This review serves to provide basic knowledge of these commonly utilized protein and polysaccharide biopolymers and their fiber fabrication methods from various ionic liquids, as well as the effect of post-treatments on these fiber materials and their applications in biomedical and pharmaceutical research, wound healing, environmental filters and sustainable and green chemistry research.

Interplay between Light and Functionalized Silk Fibroin and Applications

Silkworm silk has been considered to be a luxurious textile for more than five thousand years. Native silk fibroin (SF) films have excellent (ca. 90%) optical transparency and exhibit fluorescence under UV light. The silk dyeing process is very important and difficult, and methods such as pigmentary coloration and structural coloration have been tested for coloring silk fabrics. To functionalize silk that exhibits fluorescence, the in vivo and in vitro assembly of functional compounds with SF and the resulting amplification of fluorescence emission are examined. Finally, we discuss the applications of SF materials in basic optical elements, light energy conversion devices, photochemical reactions, sensing, and imaging. This review is expected to provide insight into the interaction between light and silk and to inspire researchers to develop silk materials with a consideration of history, material properties, and future prospects.

Electrically Conductive Materials: Opportunities and Challenges in Tissue Engineering

Tissue engineering endeavors to regenerate tissues and organs through appropriate cellular and molecular interactions at biological interfaces. To this aim, bio-mimicking scaffolds have been designed and practiced to regenerate and repair dysfunctional tissues by modifying cellular activity. Cellular activity and intracellular signaling are performances given to a tissue as a result of the function of elaborated electrically conductive materials. In some cases, conductive materials have exhibited antibacterial properties; moreover, such materials can be utilized for on-demand drug release. Various types of materials ranging from polymers to ceramics and metals have been utilized as parts of conductive tissue engineering scaffolds, having conductivity assortments from a range of semi-conductive to conductive. The cellular and molecular activity can also be affected by the microstructure; therefore, the fabrication methods should be evaluated along with an appropriate selection of conductive materials. This review aims to address the research progress toward the use of electrically conductive materials for the modulation of cellular response at the material-tissue interface for tissue engineering applications.

Gold Nanoparticle-Integrated Scaffolds for Tissue Engineering and Regenerative Medicine

The development of scaffolding materials that recapitulate the cellular microenvironment and provide cells with physicochemical cues is crucial for successfully engineering functional tissues that can aid in repairing damaged organs. The use of gold nanoparticles for tissue engineering and regenerative medicine has raised great interest in recent years. In this mini review, we describe the shape-dependent properties of gold nanoparticles, and their versatile use in creating tunable nanocomposite scaffolds with improved mechanical and electrical properties for tissue engineering. We further describe using gold nanoparticle-integrated scaffolds to achieve improved stem cells proliferation and differentiation. Finally, we discuss the main challenges and prospects for clinical translation of gold nanoparticles-hybrid scaffolds.

Gold nanorods reinforced silk fibroin nanocomposite for peripheral nerve tissue engineering applications

Nowadays, regenerating peripheral nerves injuries (PNIs) remain a major clinical challenge, which has gained a great attention between scientists. Here, we represent a nanocomposite based on silk fibroin reinforced gold nanorods (SF/GNRs) to evaluate the proliferation and attachment of PC12 cells. The morphological characterization of nanocomposites with transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) showed that the fabricated scaffolds have porous structure with interconnected pores that is suitable for cell adhesion and growth. GNRs significantly improved the poor electrical conductivity of bulk silk fibroin scaffold. Evaluating the morphology of PC12 cells on the scaffold also confirmed the normal morphology of cells with good rate of adhesion. SF/GNRs nanocomposites showed better cellular attachment, growth and proliferation without any toxicity compared with bulk SF scaffold. Moreover, immunostaining studies represented the overexpression of neural specific proteins like nestin and neuron specific enolase (NSE) in the cells cultured on SF/GNRs nanocomposites in comparison to neat SF scaffolds.

Recent advances in inorganic nanomaterials for wound-healing applications

The emergence of inorganic nanoparticles has generated considerable expectation for solving various biomedical issues including wound healing and tissue regeneration. This review article highlights the role and recent advancements of inorganic nanoparticles for wound healing and tissue regeneration along with their advantages, clinical status, challenges and future directions.

Bioactive Silk-Based Nerve Guidance Conduits for Augmenting Peripheral Nerve Repair

Repair of peripheral nerve injuries depends upon complex biology stemming from the manifold and challenging injury-healing processes of the peripheral nervous system. While surgical treatment options are available, they tend to be characterized by poor clinical outcomes for the injured patients. This is particularly apparent in the clinical management of a nerve gap whereby nerve autograft remains the best clinical option despite numerous limitations; in addition, effective repair becomes progressively more difficult with larger gaps. Nerve conduit strategies based on tissue engineering approaches and the use of silk as scaffolding material have attracted much attention in recent years to overcome these limitations and meet the clinical demand of large gap nerve repair. This review examines the scientific advances made with silk-based conduits for peripheral nerve repair. The focus is on enhancing bioactivity of the conduits in terms of physical guidance cues, inner wall and lumen modification, and imbuing novel conductive functionalities.

Fabrication and characterization of gold nanoparticle-doped electrospun PCL/chitosan nanofibrous scaffolds for nerve tissue engineering

In the field of nerve tissue engineering, nanofibrous scaffolds could be a promising candidate when they are incorporated with electrical cues. Unique physico-chemical properties of gold nanoparticles (AuNPs) make them an appropriate component for increasing the conductivity of scaffolds to enhance the electrical signal transfer between neural cells. The aim of this study was fabrication of AuNPs-doped nanofibrous scaffolds for peripheral nerve tissue engineering. Polycaprolactone (PCL)/chitosan mixtures with different concentrations of chitosan (0.5, 1 and 1.5) were electrospun to obtain nanofibrous scaffolds. AuNPs were synthesized by the reduction of HAuCl₄ using chitosan as a reducing/stabilizing agent. A uniform distribution of AuNPs with spherical shape was achieved throughout the PCL/chitosan matrix. The UV-Vis spectrum revealed that the amount of gold ions absorbed by nanofibrous scaffolds is in direct relationship with their chitosan content. Evaluation of electrical property showed that inclusion of AuNPs significantly enhanced the conductivity of scaffolds. Finally, after 5 days of culture, biological response of Schwann cells on the AuNPs-doped scaffolds was superior to that on as-prepared scaffolds in terms of improved cell attachment and higher proliferation. It can be concluded that the prepared AuNPs-doped scaffolds can be used to promote peripheral nerve regeneration.

Mass Production of Biocompatible Graphene Using Silk Nanofibers

Mass production of high-quality graphene dispersions under mild conditions impacts the utility of the material for biomedical applications. Various proteins have been used to prepare graphene dispersions, rare sources, and expensive prices for these proteins restrict their large-scale utility for the production of graphene. Here, inexpensive silk proteins as an abundant resource in nature were used for graphene exfoliation. The silk proteins were assembled into hydrophobic nanofibers with negative charge, and then optimized for the production of graphene. Significantly higher concentrations (>8 mg mL^-1) and yields (>30%) of graphene dispersions under ambient aqueous conditions were achieved compared with previous protein-assisted exfoliation systems. The exfoliated graphene exhibited excellent stability in water and fetal bovine serum solution, cytocompatibility, and conductivity, suggesting a promising future in biomedical and bioengineering applications.

Assembly of Gold Nanorods on HSA Amyloid Fibrils to Develop a Conductive Nanoscaffold for Potential Biomedical and Biosensing Applications

Today, Gold Nanorods have promised variety of applications in conjugation with biomolecules of interest. Discovery of functional amyloids has also been highlighted with possible use in designing high performance materials. To exploit dual properties of both Nano and Bio counterparts in new functional materials, this effort has focused on synthesis of a potential hybrid system of Gold nanorods (GNRs) and HSA amyloid fibrils to develop a conductive nanoscaffold. UV-Vis spectroscopy, Thioflavin T (ThT) assay, Far-UV Circular Dichroism (CD) spectropolarimetry, fluorescence and Transmission Electron microscopy were used to characterize formation of the nanostructures and amyloid fibrils. Surface plasmon resonance of GNRs was also monitored upon interaction with HSA amyloid fibrils, showing that the plasmonic component of the hybrid system has maintained its characteristic rod morphology without any perturbations. Analysis of Nyquist plots for the hybrid nanoscaffold showed that the electronic behavior of the hybrid system has been enhanced due to the presence of the assembled GNRs. Results of this investigation highlight the possibility of fabricating hybrid nano-bioscaffolds as promising candidates in versatile biomedical and biosensing applications.

Inorganic Nanomaterials for Soft Tissue Repair and Regeneration

Inorganic nanomaterials have witnessed significant advances in areas of medicine including cancer therapy, imaging, and drug delivery, but their use in soft tissue repair and regeneration is in its infancy. Metallic, ceramic, and carbon allotrope nanoparticles have shown promise in facilitating tissue repair and regeneration. Inorganic nanomaterials have been employed to improve stem cell engraftment in cellular therapy, material mechanical stability in tissue repair, electrical conductivity in nerve and cardiac regeneration, adhesion strength in tissue approximation, and antibacterial capacity in wound dressings. These nanomaterials have also been used to improve or replace common surgical materials and restore functionality to damaged tissue. We provide a comprehensive overview of inorganic nanomaterials in tissue repair and regeneration, and discuss their promise and limitations for eventual translation to the clinic.

Random lasing from structurally-modulated silk fibroin nanofibers

Structural arrangement and dimension play vital roles in wave transport and amplification as they can restrict the volume explored by the waves. However, it is challenging to systematically investigate the interplay among structural, optical, and mechanical properties, in part because of limited experimental platforms that modulate the structural arrangement in a continuous manner. We present light amplification action in Rhodamine B doped silk fibroin (SF) nanofibrous scaffolds and its modulation via the control of the alignment or directionality of SF nanofibers through an electrospinning procedure. Random lasing features of such scaffolds are examined as a function of structural arrangement of the SF nanofibers, and optical-structural-mechanical relationships of the SF-based structures are examined. As SF nanofibers are aligned parallel undergoing a transition from three to quasi-two dimension, light amplification features (e.g., lasing threshold and output power) enhanced, which also strongly correlated with mechanical characteristics (i.e., Young’s moduli) of the scaffolds. We confirm such optical characteristics using quasi-mode analyses based on the finite element method. We further demonstrate non-contact, in situ measurement of alternations in lasing features of the scaffolds while the specimens are under tensile loads. These results may highlight potential utility of the scaffolds as a flexible and biocompatible sensor.

A Gelatin-sulfonated Silk Composite Scaffold based on 3D Printing Technology Enhances Skin Regeneration by Stimulating Epidermal Growth and Dermal Neovascularization

One of the key problems hindering skin repair is the deficiency of dermal vascularization and difficulty of epidermis regeneration, which makes it challenging to fabricate scaffolds that can biologically fulfill the requirements for skin regeneration. To overcome this problem, three-dimensional printing was used to fabricate a gelatin-sulfonated silk composite scaffold that was incorporated with basic fibroblast growth factor 2 (FGF-2) through binding with a sulfonic acid group (SO₃) (3DG-SF-SO₃-FGF). The efficacy and mechanism by which the 3DG-SF-SO₃-FGF scaffolds promote skin regeneration were investigated both within in vitro cell culture and in vivo with a full-thickness skin defect model. The histological results showed that the gelatin-sulfonated silk composite scaffolds promoted granulation, and that incorporation of FGF-2 significantly enhanced the regeneration of skin-like tissues after implantation in rat skin defects for 14 and 28 days. Further investigations demonstrated that 3DG-SF-SO₃-FGF scaffolds might stimulate dermal vascularization. These findings thus suggest that incorporation of FGF-2 into the 3D printed scaffolds is a viable strategy for enhancing skin regeneration.

Electrospun protein nanofibers in healthcare: A review

Electrospun nanofibers are being utilized for a wide range of healthcare applications. A plethora of natural and synthetic polymers are exploited for their ability to be electrospun and replace the complex habitat provided by the extracellular matrix for the cells. The fabrication of nanofibers can be tuned to act as a multicarrier system to deliver drugs, growth factors and health supplements etc. in a sustained manner. Owing to its pliability, nanofibers reached its heights in tissue engineering and drug delivery applications. This review mainly focuses on various standardized parameters and optimized blending ratios for animal and plant proteins to yield fine, continuous nanofibers for effective utilization in various healthcare applications.

Silver nanoparticle-immobilized porous POM/PLLA nanofibrous membranes: efficient catalysts for reduction of 4-nitroaniline

Silver nanoparticle-immobilized porous POM/PLLA NFMs were successfully prepared and used as efficient catalysts for the reduction of 4-nitroaniline.

Investigation of the electro-spinnability of alginate solutions containing gold precursor HAuCl4

Alginate nanofibers with an average diameter of 75nm have been prepared by the electrospinning process. In addition, the spinnability of the solutions in the presence of the gold precursor HAuCl4 was investigated. At low concentrations of HAuCl4 well-formed nanofibers were produced, whereas as its concentration increases the nanofibrous mats present an increased number of bead-like defects. Herein, the in situ preparation of gold nanoparticles (Au NPs) is discussed since sodium alginate (SA) acts as the reducing agent and a mechanism is proposed in order to explain the bead-effect as well as the surface morphology of the alginate fibers decorated with Au NPs.

Approaches to Peripheral Nerve Repair: Generations of Biomaterial Conduits Yielding to Replacing Autologous Nerve Grafts in Craniomaxillofacial Surgery

Peripheral nerve injury is a common clinical entity, which may arise due to traumatic, tumorous, or even iatrogenic injury in craniomaxillofacial surgery. Despite advances in biomaterials and techniques over the past several decades, reconstruction of nerve gaps remains a challenge. Autografts are the gold standard for nerve reconstruction. Using autografts, there is donor site morbidity, subsequent sensory deficit, and potential for neuroma development and infection. Moreover, the need for a second surgical site and limited availability of donor nerves remain a challenge. Thus, increasing efforts have been directed to develop artificial nerve guidance conduits (ANCs) as new methods to replace autografts in the future. Various synthetic conduit materials have been tested in vitro and in vivo, and several first- and second-generation conduits are FDA approved and available for purchase, while third-generation conduits still remain in experimental stages. This paper reviews the current treatment options, summarizes the published literature, and assesses future prospects for the repair of peripheral nerve injury in craniomaxillofacial surgery with a particular focus on facial nerve regeneration.

Protein-Based Bioelectronics

The desire for flexible electronics is booming, and development of bioelectronics for health monitoring, internal body procedures, and other biomedical applications is heavily responsible for the growing market. Most current fabrication techniques for flexible bioelectronics, however, do not use materials that optimize both biocompatibility and mechanical properties. This Review explores flexible electronic technologies, fabrication methods, and protein materials for biomedical applications. With favorable sustainability and biocompatibility, naturally derived proteins are an exceptional alternative to synthetic materials currently used. Many proteins can take on various forms, such as fibers, films, and scaffolds. The fabrication of resistors and organic solar cells on silk has already been proven, and optoelectronics made of collagen and keratin have also been explored. The flexibility and biocompatibility of these materials along with their proven performance in electronics make them ideal materials in the advancement of biomedical devices.

Monitoring/Imaging and Regenerative Agents for Enhancing Tissue Engineering Characterization and Therapies

The past three decades have seen numerous advances in tissue engineering and regenerative medicine (TERM) therapies. However, despite the successes there is still much to be done before TERM therapies become commonplace in clinic. One of the main obstacles is the lack of knowledge regarding complex tissue engineering processes. Imaging strategies, in conjunction with exogenous contrast agents, can aid in this endeavor by assessing in vivo therapeutic progress. The ability to uncover real-time treatment progress will help shed light on the complex tissue engineering processes and lead to development of improved, adaptive treatments. More importantly, the utilized exogenous contrast agents can double as therapeutic agents. Proper use of these Monitoring/Imaging and Regenerative Agents (MIRAs) can help increase TERM therapy successes and allow for clinical translation. While other fields have exploited similar particles for combining diagnostics and therapy, MIRA research is still in its beginning stages with much of the current research being focused on imaging or therapeutic applications, separately. Advancing MIRA research will have numerous impacts on achieving clinical translations of TERM therapies. Therefore, it is our goal to highlight current MIRA progress and suggest future research that can lead to effective TERM treatments.

Wet electrospun silk fibroin/gold nanoparticle 3D matrices for wound healing applications

The effectiveness of a silk fibroin/gold nanoparticle 3D nanofibrous matrix on a rat model of full-thickness dermal wound healing was investigated.

White-Light-Induced Collective Heating of Gold Nanocomposite/Bombyx mori Silk Thin Films with Ultrahigh Broadband Absorbance

This paper describes a systematic investigation of the phenomenon of white-light-induced heating in silk fibroin films embedded with gold nanoparticles (Au NPs). The Au NPs functioned to develop an ultrahigh broadband absorber, allowing white light to be used as a source for photothermal generation. With an increase of the Au content in the composite films, the absorbance was enhanced significantly around the localized surface plasmon resonance (LSPR) wavelength, while non-LSPR wavelengths were also increased dramatically. The greater amount of absorbed light increased the rate of photoheating. The optimized composite film exhibited ultrahigh absorbances of approximately 95% over the spectral range from 350 to 750 nm, with moderate absorbances (>60%) at longer wavelengths (750-1000 nm). As a result, the composite film absorbed almost all of the incident light and, accordingly, converted this optical energy to local heat. Therefore, significant temperature increases (ca. 100 °C) were readily obtained when we irradiated the composite film under a light-emitting diode or halogen lamp. Moreover, such composite films displayed linear light-to-heat responses with respect to the light intensity, as well as great photothermal stability. A broadband absorptive film coated on a simple Al/Si Schottky diode displayed a linear, significant, stable photo-thermo-electronic effect in response to varying the light intensity.