Hybrid photon-plasmon nanowire lasers

Transfer Learning for Modeling Plasmonic Nanowire Waveguides

Retrieving waveguiding properties of plasmonic metal nanowires (MNWs) through numerical simulations is time- and computational-resource-consuming, especially for those with abrupt geometric features and broken symmetries. Deep learning provides an alternative approach but is challenging to use due to inadequate generalization performance and the requirement of large sets of training data. Here, we overcome these constraints by proposing a transfer learning approach for modeling MNWs under the guidance of physics. We show that the basic knowledge of plasmon modes can first be learned from free-standing circular MNWs with computationally inexpensive data, and then reused to significantly improve performance in predicting waveguiding properties of MNWs with various complex configurations, enabling much smaller errors (~23-61% reduction), less trainable parameters (~42% reduction), and smaller sets of training data (~50-80% reduction) than direct learning. Compared to numerical simulations, our model reduces the computational time by five orders of magnitude. Compared to other non-deep learning methods, such as the circular-area-equivalence approach and the diagonal-circle approximation, our approach enables not only much higher accuracies, but also more comprehensive characterizations, offering an effective and efficient framework to investigate MNWs that may greatly facilitate the design of polaritonic components and devices.

Correlations between incident and emission polarization in nanowire-particle coupled junctions

Plasmonic nanostructures with subwavelength confinement are of great importance for the development of integrated nanophotonic circuits and devices. Here, we experimentally investigate how the polarization of the emitted light from nanowire-particle junction relies on the incident polarization. We demonstrate that the correlations can be effectively modulated by the particle position relative to the wire. By varying the wire-particle gap with only several nanometers, the nanowire-particle junction can be changed from polarization maintainer to rotator. Then, by moving the particle along the wire within half of the surface plasmon polariton (SPP) beat, the polarization behaviors can be tuned from positive to negative correlation. The mechanism can be well understood by the hybridization of wire-particle coupled mode and propagating SPP modes, which is verified by finite-difference time-domain simulations. These findings would provide a new degree of freedom for manipulating light polarization at the nanometer scale and additional flexibility for constructing nanophotonic devices.

Strong mode coupling-enabled hybrid photon-plasmon laser with a microfiber-coupled nanorod

Laser based on single plasmonic nanoparticle can provide optical frequency radiation far beyond the diffraction limit and is one of the ultimate goals of nanolasers, yet it remains a challenge to be realized because of the inherently high Ohmic loss. Here, we report the direct observation of lasing in microfiber-coupled single plasmonic nanoparticles enabled by strong mode coupling. We show that, by strongly coupling a gold nanorod (GNR) with the whispering gallery cavity of a dye-doped polymer microfiber (with diameter down to 2.0 μm), the substantially enhanced optical coherence of the hybrid photon-plasmon mode and effective gain accumulated from the active microfiber cavity enable single-mode laser emission from the GNR at room temperature with a threshold as low as 2.71 MW/cm² and a linewidth narrower than 2 nm.

Far-field optical imaging of surface plasmons with a subdiffraction limited separation

When an ultrathin silver nanowire with a diameter less than 100 nm is placed on a photonic band gap structure, surface plasmons can be excited and propagate along two side-walls of the silver nanowire. Although the diameter of the silver nanowire is far below the diffraction limit, two bright lines can be clearly observed at the image plane by a standard wide-field optical microscope. Simulations suggest that the two bright lines in the far-field are caused by the unique phase distribution of plasmons on the two side-walls of the silver nanowire. Combining with the sensing ability of surface plasmons to its environment, the configuration reported in this work is capable of functioning as a sensing platform to monitor environmental changes in the near-field region of this ultrathin nanowire.

Nanowire Waveguides and Lasers: Advances and Opportunities in Photonic Circuits

Due to their single-crystalline structures, comparatively large aspect ratios, tight optical confinement and smooth surfaces, nanowires have increasingly attracted research interests for both fundamental studies and technological applications in on-chip photonic devices. This class of nanostructures typically have cross-sections of 2~200 nm and lengths upwards of several micrometers, allowing for the bridging of the nanoscopic and macroscopic world. In particular, the lasing behaviors can be established from a nanowire resonator with positive feedback via end-facet reflection, making the nanowire a promising candidate in the next generation of optoelectronics. Consequently, versatile nanowire-based devices ranging from nanoscale coherent lasers, optical sensors, waveguides, optical switching, and photonic networks have been proposed and experimentally demonstrated in the past decade. In this article, significant progresses in the nanowire fabrication, lasers, circuits, and devices are reviewed. First, we focus on the achievements of nanowire synthesis and introduce the basics of nanowire optics. Following the cavity configurations and mode categories, then the different light sources consisting of nanowires are presented. Next, we review the recent progress and current status of functional nanowire devices. Finally, we offer our perspective of nanowires regarding their challenges and future opportunities in photonic circuits.

Ten years of spasers and plasmonic nanolasers

Ten years ago, three teams experimentally demonstrated the first spasers, or plasmonic nanolasers, after the spaser concept was first proposed theoretically in 2003. An overview of the significant progress achieved over the last 10 years is presented here, together with the original context of and motivations for this research. After a general introduction, we first summarize the fundamental properties of spasers and discuss the major motivations that led to the first demonstrations of spasers and nanolasers. This is followed by an overview of crucial technological progress, including lasing threshold reduction, dynamic modulation, room-temperature operation, electrical injection, the control and improvement of spasers, the array operation of spasers, and selected applications of single-particle spasers. Research prospects are presented in relation to several directions of development, including further miniaturization, the relationship with Bose-Einstein condensation, novel spaser-based interconnects, and other features of spasers and plasmonic lasers that have yet to be realized or challenges that are still to be overcome.

High Circular Polarized Nanolaser with Chiral Gammadion Metal Cavity

We demonstrate a circularly polarized laser with the metal-gallium-nitride gammadion nanocavities. The ultraviolet lasing signal was observed with the high circular dichroism at room temperature under pulsed optical pump conditions. Without external magnetism which breaks the time-reversal symmetry to favor optical transitions of a chosen handedness, the coherent outputs of these chiral nanolasers show a dissymmetry factor as high as 1.1. The small footprint of these lasers are advantageous for applications related to circularly polarized photons in future integrated systems, in contrast to the bulky setup of linearly-polarized lasers and quarter-wave plates.

Ultrastrong coupling of CdZnS/ZnS quantum dots to bonding breathing plasmons of aluminum metal-insulator-metal nanocavities in near-ultraviolet spectrum

Strong coupling originating from excitons of quantum dots and plasmons in nanocavities can be realized at room temperature due to the large electromagnetic field enhancement of plasmons, offering building blocks for quantum information systems, ultralow-power switches and lasers. However, most of the current strong coupling effects were realized by the interaction between excitons and far-field light excited bright plasmon modes in the visible range. Beyond that, there is still a lack of direct imaging of polariton modes at the nanoscale. In this work, by using cathodoluminescence, ultrastrong coupling with Rabi splitting exceeding 1 eV between bonding breathing plasmons of aluminum (Al) metal-insulator-metal (MIM) cavities and excited states of CdZnS/ZnS quantum dots was observed in the near-ultraviolet (UV) spectrum. Further, the hybridization of the QDs excitons and bonding breathing plasmonic modes is verified by deep-subwavelength images of polaritonic modes in real-space. Analytic analysis based on the coupled oscillator model and full-wave electromagnetic simulations is consistent with our experimental results. Our work not only indicates the great potential of electron excited plasmon modes for strong coupling applications, but also extends the polaritonic frequency to the UV range with Al nanocavities.

Excitation and analyzation of different surface plasmon modes on a suspended Ag nanowire

Silver nanowires (AgNWs), as one of the most important plasmonic waveguides, can support several different plasmonic modes. These surface plasmon polariton (SPP) modes have different electric field distributions, effective mode areas, propagation lengths and losses and thus can be used for different applications, from efficiently collecting single photons to carrying quantum entanglement. Therefore, the excitation and analysis of these different SPP modes are of pivotal importance for the development of subwavelength optical devices. In this work, we investigate different SPP modes on a suspended AgNW adhered to a fiber taper. Theoretical simulations and experimental results show that the desired SPP modes can be selectively excited by adjusting either the polarization of the excitation light or the coupling length between the fiber taper and the AgNW. Moreover, fundamental and higher-order SPP modes can be distinguished by means of a far-field method. Our results not only enable convenient and controllable excitation of the desired SPP modes but also provide unique insight into the optical properties of plasmonic waveguides.

Nanoscopic Spotlight in a Spindle Semiconductor Nanowire

Theoretically, no matter how thin a nanowire is, it can transport light in the form of an evanescent field. However, in practice, the low propagation efficiency induced by complex dissipation makes light transport difficult to realize when the nanowire is distinctly thinner than ∼ λ/2. Accordingly, nanowire photonics research at such a scale is limited. Herein, light propagation was achieved in a very thin spindle nanowire (diameter below 70 nm), in which a nanoscopic spotlight formed. The nanowire output a maximum emission in the transverse dimension as small as ∼53 nm. The finite-difference time-domain (FDTD) simulation implied that the increased dimension gradient near the tip induced a maximum leakage of the propagating light at a transverse feature, precisely determined by the intrinsic feature of the nanowire. Moreover, a spectrum splitter phenomenon was observed and demonstrated based on the wavelength-dependent light propagation behavior in such a nanowire. These results contribute to the rational design of nanoscopic near-field illuminant, optoelectric, and photobiological probes with improved resolution largely superior to the so-called subwavelength level.

A nanophotonic laser on a graph

Conventional nanophotonic schemes minimise multiple scattering to realise a miniaturised version of beam-splitters, interferometers and optical cavities for light propagation and lasing. Here instead, we introduce a nanophotonic network built from multiple paths and interference, to control and enhance light-matter interaction via light localisation. The network is built from a mesh of subwavelength waveguides, and can sustain localised modes and mirror-less light trapping stemming from interference over hundreds of nodes. With optical gain, these modes can easily lase, reaching ~100 pm linewidths. We introduce a graph solution to the Maxwell's equation which describes light on the network, and predicts lasing action. In this framework, the network optical modes can be designed via the network connectivity and topology, and lasing can be tailored and enhanced by the network shape. Nanophotonic networks pave the way for new laser device architectures, which can be used for sensitive biosensing and on-chip optical information processing.

Applications of nanolasers

Nanolasers generate coherent light at the nanoscale. In the past decade, they have attracted intense interest, because they are more compact, faster and more power-efficient than conventional lasers. Thanks to these capabilities, nanolasers are now an emergent tool for a variety of practical applications. In this Review, we explain the intrinsic merits of nanolasers and assess recent progress on their applications, particularly for optical interconnects, near-field spectroscopy and sensing, optical probing for biological systems and far-field beam synthesis through near-field eigenmode engineering. We highlight the scientific and engineering challenges that remain for forging nanolasers into powerful tools for nanoscience and nanotechnology.

Lithographically fabricated gold nanowire waveguides for plasmonic routers and logic gates

Fabricating plasmonic nanowire waveguides and circuits by lithographic fabrication methods is highly desired for nanophotonic circuitry applications. Here we report an approach for fabricating metal nanowire networks by using electron beam lithography and metal film deposition techniques. The gold nanowire structures are fabricated on quartz substrates without using any adhesion layer but coated with a thin layer of Al2O3 film for immobilization. The thermal annealing during the Al2O3 deposition process decreases the surface plasmon loss. In a Y-shaped gold nanowire network, the surface plasmons can be routed to different branches by controlling the polarization of the excitation light, and the routing behavior is dependent on the length of the main nanowire. Simulated electric field distributions show that the zigzag distribution of the electric field in the nanowire network determines the surface plasmon routing. By using two laser beams to excite surface plasmons in a Y-shaped nanowire network, the output intensity can be modulated by the interference of surface plasmons, which can be used to design Boolean logic gates. We experimentally demonstrate that AND, OR, XOR and NOT gates can be realized in three-terminal nanowire networks, and NAND, NOR and XNOR gates can be realized in four-terminal nanowire networks. This work takes a step toward the fabrication of on-chip integrated plasmonic circuits.

Configurable Integration of On-Chip Quantum Dot Lasers and Subwavelength Plasmonic Waveguides

The integration of on-chip dielectric lasers and subwavelength plasmonic waveguides has attracted enormous attention because of the combination of both the advantages of the high performances of the small dielectric lasers and the subwavelength plasmonic waveguides. However, the configurable integration is still a challenge owing to the complexity of the hybrid structures and the damageability of the gain media in the multistep micro/nanofabrications. By employing the dark-field optical imaging technique with a position uncertainty of about 21 nm and combining the high-resolution electron beam lithography, the small colloidal quantum dot (CQD) lasers without any damages are accurately aligned with the silver nanowires. As a result, the integration of the CQD lasers and the silver nanowires can be flexibly configured on chips. In the experiment, the tangential coupling, radial coupling, and complex coupling between the high-performance CQD lasers and the subwavelength silver nanowires are demonstrated. Because of the subwavelength field confinements of the silver nanowires, the deep-subwavelength coherent sources (multimode, one-color single-mode, or two-color single-mode) with a mode area of only 0.008λ² are output from these hybrid structures. This configurable on-chip integration with high flexibility and controllability will greatly facilitate the developments of the complex functional hybrid photonic-plasmonic circuits.

Mimicking plasmonic nanolaser emission by selective extraction of electromagnetic near-field from photonic microcavity

Plasmonic nanolasers have attracted significant attention owing to their ability to generate a coherent optical field in the deep subwavelength region, and they exhibit promising applications in integrated photonics, bioimaging and sensing. However, the demonstration of lasing in individual metallic nanoparticles with 3D subwavelength confinement represents a significant challenge and is yet to be realized. Herein, we propose to mimic a plasmonic nanolaser via selective scattering off the evanescent tail of a lasing photonic nanobelt using a single silver nanorod (24 nm × 223 nm). The nanorod acts as an optical antenna that selectively extracts the near-field component along the rod axis. The light output from the silver nanorod mimics the emission of a plasmonic nanolaser in its localized near-field and polarization dependence, except for the lasing wavelength and linewidth, which are inherited from the photonic laser. The realization of localized coherent light sources provides promising nanoscale lighting that shows potential in background-suppressed illumination, biosensing and imaging.

An on-chip hybrid plasmonic light steering concentrator with ∼96% coupling efficiency

We, for the first time, propose and theoretically study a plasmonic light steering concentrator (PLSC) that is based on a hybrid photonic-plasmonic sandwich structure. In this device, a transverse electric (TE) polarization guided mode supported by a silicon-on-insulator (SOI) waveguide is vertically coupled to a metal-dielectric-metal sandwich structure, while the structure steers the light to a perpendicular metal taper and focuses the light on the apex of the taper with a small radius of 15 nm. Based on the coupled-mode theory, the two supermodes (quasi-TM modes) are clarified to illustrate the coupling mechanism of the device. We numerically obtain over 96% coupling efficiency at the 1500 nm telecommunication wavelength, and the mode width supported by the apex is limited laterally within the range of ∼110 nm, where the field enhancement calculated is found to be more than 10⁷ compared to that of light in the silicon waveguide.

Patterned Synthesis of ZnO Nanorod Arrays for Nanoplasmonic Waveguide Applications

We report the patterned synthesis of ZnO nanorod arrays of diameters between 50 nm and 130 nm and various spacings. This was achieved by patterning hole arrays in a polymethyl methacrylate layer with electron beam lithography, followed by chemical synthesis of ZnO nanorods in the patterned holes using the hydrothermal method. The fabrication of ZnO nanorod waveguide arrays is also demonstrated by embedding the nanorods in a silver film using the electroplating process. Optical transmission measurement through the nanorod waveguide arrays is performed and strong resonant transmission of visible light is observed. We have found the resonance shifts to a longer wavelength with increasing nanorod diameter. Furthermore, the resonance wavelength is independent of the nanowaveguide array period, indicating the observed resonant transmission is the effect of a single ZnO nanorod waveguide. These nanorod waveguides may be used in single-molecule imaging and sensing as a result of the nanoscopic profile of the light transmitted through the nanorods and the controlled locations of these nanoscale light sources.

Extending the Propagation Distance of a Silver Nanowire Plasmonic Waveguide with a Dielectric Multilayer Substrate

Chemical-synthesized silver nanowires have been proven as an efficient architecture for plasmonic waveguides, but the high propagation loss prevents their widely applications. Here, we demonstrate that the propagation distance of the plasmons along a silver nanowire can be extended if this nanowire was placed on a dielectric multilayer substrate containing a photonic band gap but not placed on a commonly used glass substrate. The propagation distance at 630 nm wavelength can reach 16 μm, even when the silver nanowire is as thin as 90 nm in diameter. Experimental and simulation results further show that the polarization of this propagating plasmon mode was nearly parallel to the surface of the dielectric multilayer, so it can be excited by a transverse-electric polarized Bloch surface wave propagating along a polymer nanowire with diameter at only about 170 nm on the same dielectric multilayer. Numerical simulations were also carried out and are consistent with the experiment results. Our work provides a platform with which to extend the propagation distance of the plasmonic waveguide and also for the integration between photonic and plasmonic waveguides on the nanometer scale.

Anisotropic enhancement of Yb3+ luminescence by disordered plasmonic networks self-assembled on RbTiOPO4 ferroelectric crystals

Increasing Yb³⁺ absorption efficiency is currently desired in a number of applications including bio-imaging, photovoltaics, near infrared driven photocatalysis or ultra-short pulsed solid-state lasers. In this work, silver nanoparticles, which are connected forming disordered networks, have been self-assembled on Yb³⁺ doped RbTiOPO₄ crystals to produce a remarkable enhancement of Yb³⁺ absorption, and hence in the photoluminescence of this ion. The results are interpreted taking into account the near-field response of the plasmonic networks, which display strong amplification of the electric field at the maximum of Yb³⁺ excitation at around 900 nm, together with the anisotropic character of the Yb³⁺ transitions in RbTiOPO₄. We show that in the near field regime, the scattering of the plasmonic networks produces additional polarization field components to those of the incident field, which allows access to the largest transition dipolar moment of Yb³⁺ ions in RbTiOPO₄. As a result, a much more efficient route for Yb³⁺ excitation takes place at the immediacy of the plasmonic networks. This work provides fundamental insights for improving the optical properties of rare earth ions by the suitable design of metallic nanoparticle arrangements, and constitutes a promising step towards the development of new multifunctional solid-state lasers.

All-Color Subwavelength Output of Organic Flexible Microlasers

All-color subwavelength output of lasers was demonstrated in a rationally designed organic microdisk/silver nanowire heterostructures. The dye-doped flexible microdisks served as the wavelength tunable whispering-gallery-mode lasers with low lasing thresholds, whereas the silver nanowires supported the output of the lasing mode as subwavelength coherent light sources. The wavelength of the outcoupled laser was tuned over the full visible spectrum scope owing to the flexibility of the microdisks and their compatibility with various organic laser dyes. Furthermore, a multicolor subwavelength laser was achieved in a single heterostructure and the laser output was successfully modulated by varying the surface plasmon polariton propagation length.

Flexible integration of free-standing nanowires into silicon photonics

Silicon photonics has been developed successfully with a top-down fabrication technique to enable large-scale photonic integrated circuits with high reproducibility, but is limited intrinsically by the material capability for active or nonlinear applications. On the other hand, free-standing nanowires synthesized via a bottom-up growth present great material diversity and structural uniformity, but precisely assembling free-standing nanowires for on-demand photonic functionality remains a great challenge. Here we report hybrid integration of free-standing nanowires into silicon photonics with high flexibility by coupling free-standing nanowires onto target silicon waveguides that are simultaneously used for precise positioning. Coupling efficiency between a free-standing nanowire and a silicon waveguide is up to ~97% in the telecommunication band. A hybrid nonlinear-free-standing nanowires–silicon waveguides Mach–Zehnder interferometer and a racetrack resonator for significantly enhanced optical modulation are experimentally demonstrated, as well as hybrid active-free-standing nanowires–silicon waveguides circuits for light generation. These results suggest an alternative approach to flexible multifunctional on-chip nanophotonic devices.

Precisely assembling free-standing nanowires for on-demand photonic functionality remains a challenge. Here, Chen et al. integrate free-standing nanowires into silicon waveguides and show all-optical modulation and light generation on silicon photonic chips.

Photo-acoustic spectroscopy revealing resonant absorption of self-assembled GaAs-based nanowires

III–V semiconductors nanowires (NW) have recently attracted a significant interest for their potential application in the development of high efficiency, highly-integrated photonic devices and in particular for the possibility to integrate direct bandgap materials with silicon-based devices. Here we report the absorbance properties of GaAs-AlGaAs-GaAs core-shell-supershell NWs using photo-acoustic spectroscopy (PAS) measurements in the spectral range from 300 nm to 1100 nm wavelengths. The NWs were fabricated by self-catalyzed growth on Si substrates and their dimensions (length ~5 μm, diameter ~140–150 nm) allow for the coupling of the incident light to the guided modes in near-infrared (IR) part of the spectrum. This coupling results in resonant absorption peaks in the visible and near IR clearly evidenced by PAS. The analysis reveal broadening of the resonant absorption peaks arising from the NW size distribution and the interaction with other NWs. The results show that the PAS technique, directly providing scattering independent absorption spectra, is a very useful tool for the characterization and investigation of vertical NWs as well as for the design of NW ensembles for photonic applications, such as Si-integrated light sources, solar cells, and wavelength dependent photodetectors.

Plasmonic Waveguide-Integrated Nanowire Laser

Next-generation optoelectronic devices and photonic circuitry will have to incorporate on-chip compatible nanolaser sources. Semiconductor nanowire lasers have emerged as strong candidates for integrated systems with applications ranging from ultrasensitive sensing to data communication technologies. Despite significant advances in their fundamental aspects, the integration within scalable photonic circuitry remains challenging. Here we report on the realization of hybrid photonic devices consisting of nanowire lasers integrated with wafer-scale lithographically designed V-groove plasmonic waveguides. We present experimental evidence of the lasing emission and coupling into the propagating modes of the V-grooves, enabling on-chip routing of coherent and subdiffraction confined light with room-temperature operation. Theoretical considerations suggest that the observed lasing is enabled by a waveguide hybrid photonic-plasmonic mode. This work represents a major advance toward the realization of application-oriented photonic circuits with integrated nanolaser sources.

Lithographically Defined, Room Temperature Low Threshold Subwavelength Red-Emitting Hybrid Plasmonic Lasers

Hybrid plasmonic lasers provide deep subwavelength optical confinement, strongly enhanced light-matter interaction and together with nanoscale footprint promise new applications in optical communication, biosensing, and photolithography. The subwavelength hybrid plasmonic lasers reported so far often use bottom-up grown nanowires, nanorods, and nanosquares, making it difficult to integrate these devices into industry-relevant high density plasmonic circuits. Here, we report the first experimental demonstration of AlGaInP based, red-emitting hybrid plasmonic lasers at room temperature using lithography based fabrication processes. Resonant cavities with deep subwavelength 2D and 3D mode confinement of λ²/56 and λ³/199, respectively, are demonstrated. A range of cavity geometries (waveguides, rings, squares, and disks) show very low lasing thresholds of 0.6-1.8 mJ/cm² with wide gain bandwidth (610 nm-685 nm), which are attributed to the heterogeneous geometry of the gain material, the optimized etching technique, and the strong overlap of the gain material with the plasmonic modes. Most importantly, we establish the connection between mode confinements and enhanced absorption and stimulated emission, which plays critical roles in maintaining low lasing thresholds at extremely small hybrid plasmonic cavities. Our results pave the way for the further integration of dense arrays of hybrid plasmonic lasers with optical and electronic technology platforms.

Direction-resolved radiation from polarization-controlled surface plasmon modes on silver nanowire antennas

Metallic nanowires (NWs) support multiple surface plasmon (SP) modes, which lead to extraordinary SP propagation behaviors. The leaky SP modes in metallic NWs connect the guiding and radiation of light at the nanometer scale. Understanding and controlling these modes are of vital importance for various nanophotonic applications. Here, we investigate the radiation from two polarization-controlled SP modes on supported silver NWs by using leakage radiation imaging and Fourier imaging techniques. The radiation directions from these modes can be clearly resolved from the Fourier images. The radiation polarization of the SP modes is related to the polarization of the excitation light. By depositing thin Al₂O₃ films onto silver NWs or decreasing the excitation wavelength, the radiation angles and wave vectors of the two modes are increased, and the longitudinal mode is more sensitive to Al₂O₃ thickness. Moreover, the propagation length of the longitudinal mode is obtained by analyzing the leakage radiation images, which is decreased with the decrease of the excitation wavelength and the increase of the Al₂O₃ layer thickness. These results show that leakage radiation from different SP modes on silver NWs can be resolved directly and controlled effectively. The supported silver NWs can thus be applied to designing plasmonic circuits, nanoantennas and nanosensors.

Microfiber interferometer with surface plasmon-polariton involvement

We fabricated a microfiber interferometer with surface plasmon-polaritons (SPPs) involvement. Commonly, the SPPs are not involved in interference due to the mismatch momentum and ultrashort propagation distance. In this Letter, an absorber-doped microfiber is utilized for increasing the matched momentum (i.e., their modal projection), and as a result, an SPP is coherent with an end-fire method-stimulated hybrid SPP. A mathematical model is proposed for investigating the modal-projection-caused interference, and its results show that the proposed interferometer is very dependent on the polarization. Confirmation experiments were carried out, and a good agreement between theoretical predictions and experimental results was found. The proposed interferometer will potentially facilitate many SPP studies in directly related fields.

Photonic Applications of Metal-Dielectric Heterostructured Nanomaterials

Metal materials, supporting plasmon modes on their surface, can confine the optical field at deep subwavelength scale, which is desired for photonic integration. However, their intrinsic high Ohmic losses make it impossible to construct the whole circuit solely with the metal materials. Integrating the plasmonic components with dielectric materials may offer a solution to this dilemma. With outstanding active optical performance, these dielectric components not only can greatly reduce the optical losses of the entire circuits but also offer an efficient way to launch the surface plasmon polaritons through the evanescent field coupling or the direct exciton-plasmon conversion. Furthermore, the cooperative interaction between metal and dielectric materials would bring vast novel optical phenomena and functional photonic devices. In this review, the synergistic effects among metal and dielectric materials in various heterostructures as well as their related applications are highlighted. Comprehensive understanding on their synergistic interactions would offer useful guidance for the design and fabrication of the ultracompact novel optical devices.

Plasmon-Assisted Nd(3+)-Based Solid-State Nanolaser

Solid-state lasers constitute essential tools in a variety of scientific and technological areas, being available in many different designs. However, although nanolasing has been successfully achieved for dyes and semiconductor gain media associated with plasmonic structures, the operation of solid-state lasers beyond the diffraction limit has not been reported yet. Here, we demonstrate room temperature laser action with subwavelength confinement in a Nd(3+)-based solid-state laser by means of the localized surface plasmon resonances supported by chains of metallic nanoparticles. We show a 50% reduction of the pump power at threshold and a remarkable 15-fold improvement of the slope efficiency with respect to the bulk laser operation. The results can be extended to the large diversity of solid-state lasers with the subsequent impact on their applications.

Construction of Nanowire Heterojunctions: Photonic Function-Oriented Nanoarchitectonics

Nanophotonics has received broad research interest because it may provide an alternative opportunity to overcome the fundamental limitations of electronic circuits. So far, diverse photonic functions, such as light generation, modulation, and detection, have been realized based on various nano-materials. The exact structural features of these material systems, including geometric characteristics, surface morphology, and material composition, play a key role in determining the photonic functions. Therefore, rational designs and constructions of materials on both morphological and componential levels, namely nanoarchitectonics, are indispensable for any photonic device with specific functionalities. Recently, a series of nanowire heterojunctions (NWHJs), which are usually made from two or more kinds of material compositions, were constructed for novel photonic applications based on various interactions between different materials at the junctions, for instance, energy transfer, exciton-plasmon coupling, or photon-plasmon coupling. A summary of these works is necessary to get a more comprehensive understanding of the relationship between photonic functions and architectonics of NWHJs, which will be instructive for designing novel photonic devices towards integrated circuits. Here, photonic function oriented nanoarchitectonics based on recent breakthroughs in nanophotonic devices are discussed, with emphasis on the design mechanisms, fabrication strategies, and excellent performances.

Single MoO3 nanoribbon waveguides: good building blocks as elements and interconnects for nanophotonic applications

Exploring new nanowaveguide materials and structures is of great scientific interest and technological significance for optical and photonic applications. In this work, high-quality single-crystal MoO₃ nanoribbons (NRs) are synthesized and used for optical guiding. External light sources are efficiently launched into the single MoO₃ NRs using silica fiber tapers. It is found that single MoO₃ NRs are as good nanowaveguides with loss optical losses (typically less than 0.1 dB/μm) and broadband optical guiding in the visible/near-infrared region. Single MoO₃ NRs have good Raman gains that are comparable to those of semiconductor nanowaveguides, but the second harmonic generation efficiencies are about 4 orders less than those of semiconductor nanowaveguides. And also no any third-order nonlinear optical effects are observed at high pump power. A hybrid Fabry-Pérot cavity containing an active CdSe nanowire and a passive MoO₃ NR is also demonstrated, and the ability of coupling light from other active nanostructures and fluorescent liquid solutions has been further demonstrated. These optical properties make single MoO₃ NRs attractive building blocks as elements and interconnects in miniaturized photonic circuitries and devices.

Mode Profiling of Semiconductor Nanowire Lasers

We experimentally determine the lasing mode(s) in optically pumped semiconductor nanowire lasers. The spatially resolved and angle-resolved far-field emission profiles of single InP nanowire lasers lying horizontally on a SiO2 substrate are characterized in a microphotoluminescence (μ-PL) setup. The experimentally obtained polarization dependent far-field profiles match very well with numerical simulations and enable unambiguous identification of the lasing mode(s). This technique can be applied to characterize lasing modes in other type of nanolasers that are integrated on a substrate in either vertical or horizontal configurations.

One-Dimensional Dielectric/Metallic Hybrid Materials for Photonic Applications

Explorations of 1D nanostructures have led to great progress in the area of nanophotonics in the past decades. Based on either dielectric or metallic materials, a variety of 1D photonic devices have been developed, such as nanolasers, waveguides, optical switches, and routers. What's interesting is that these dielectric systems enjoy low propagation losses and usually possess active optical performance, but they have a diffraction-limited field confinement. Alternatively, metallic systems can guide light on deep subwavelength scales, but they suffer from high metallic absorption and can work as passive devices only. Thus, the idea to construct a hybrid system that combines the merits of both dielectric and metallic materials was proposed. To date, unprecedented optical properties have been achieved in various 1D hybrid systems, which manifest great potential for functional nanophotonic devices. Here, the focus is on recent advances in 1D dielectric/metallic hybrid systems, with a special emphasis on novel structure design, rational fabrication techniques, unique performance, as well as their wide application in photonic components. Gaining a better understanding of hybrid systems would benefit the design of nanophotonic components aimed at optical information processing.

Metallic-nanowire-loaded silicon-on-insulator structures: a route to low-loss plasmon waveguiding on the nanoscale

The simultaneous realization of nanoscale field localization and low transmission loss remains one of the major challenges in nanophotonics. Metal nanowire waveguides can fulfill this goal to a certain extent by confining light within subwavelength space, yet their optical performances are still restricted by the tradeoff between confinement and loss, which results in quite limited propagation distances when their mode sizes are reduced down to the nanometer scale. Here we introduce a class of low-loss guiding schemes by integrating silicon-on-insulator (SOI) waveguides with plasmon nanowire structures. The closely spaced silicon and metal configurations allow efficient light squeezing within the nanometer, low-index silica gaps between them, enabling deep-subwavelength light transmission with low modal attenuation. Optimizations of key structural parameters unravel the wide-range existence of the high-performance hybrid nanowire plasmon mode, which demonstrates improved guiding properties compared to the conventional hybrid and nanowire plasmon polaritons. The excitation strategy of the guided mode and the feasibility of the waveguide for compact photonic integration as well as active components are also discussed to lay the foundation for its practical implementation. The remarkable properties of these metallic-nanowire-loaded SOI waveguides potentially lend themselves to the implementation of high performance nanophotonic components, and open up promising opportunities for a variety of intriguing applications on the nanoscale.

Excitation of surface plasmons from silver nanowires embedded in polymer nanofibers

We report an excitation of surface plasmons in silver nanowires (AgNWs) which were embedded in flexible polymer nanofibers. Using waveguiding excitation, surface plasmons in AgNWs were excited and propagated. By directing light of 650, 532, and 473 nm wavelengths into the nanofiber, surface plasmons in an embedded single AgNW (average diameter 400 nm, length 4.3 μm) were excited and the corresponding propagation lengths for the three wavelengths are 10.6, 7.7, and 5.1 μm. It was also found that, when a spatially incoherent white light of a halogen lamp with an excitation optical power of 80 μW was coupled into the polymer nanofiber, a surface plasmon mediated interference fringe was observed. In addition, on the basis of surface plasmon excitation, two adjacent AgNWs embedded in the polymer nanofibers were demonstrated to serve as coupled plasmonic waveguides.

Plasmonic lasing of nanocavity embedding in metallic nanoantenna array

Plasmonic nanolasers have ultrahigh lasing thresholds, especially those devices for which all three dimensions are truly subwavelength. Because of a momentum mismatch between the propagating light and localized optical field of the subwavelength nanocavity, poor optical pumping efficiency is another important reason for the ultrahigh threshold but is normally always ignored. On the basis of a cavity-embedded nanoantenna array design, we demonstrate a room-temperature low-threshold plasmonic nanolaser that is robust, reproducible, and easy-to-fabricate using chemical-template lithography. The mode volume of the device is ∼0.22(λ/2n)(3) (here, λ is resonant wavelength and n is the refractive index), and the experimental lasing threshold produced is ∼2.70MW/mm(2). The lasing polarization and the function of nanoantenna array are investigated in detail. Our work provides a new strategy to achieve room-temperature low-threshold plasmonic nanolasers of interest in applications to biological sensoring and information technology.

Electrically driven plasmon mediated energy transfer between ZnO microwires and Au nanoparticles

Electrically driven energy transfer between the surface defect states of ZnO quadrilateral microwires (MWs) and localized surface plasmon polaritons has been realized by means of introducing Au nanoparticles (NPs). An electroluminescence device with green emission using ZnO quadrilateral MWs, was fabricated. Once the Au NPs are sputtered on the surfaces of the ZnO MWs, the electroluminescence of the ZnO MWs will shift from green to red. Meanwhile, dual emissions were observed by means of sputtering Au NPs on a single ZnO MW periodically. Due to the Au NPs, electrically driven plasmon mediated energy transfer can achieve the modulation of amplifying, or quenching the surface defect emission. The relevant dynamic process of the surface plasmon mode mediated energy transfer was investigated. This new energy transfer method potentially offers an approach of modification and recombination of the surface defect state excitations of wide bandgap semiconductor materials.

Insulin templated synthesis of single-crystalline silver nanocables with ultrathin Ag cores

Ultrathin single-crystalline silver nanocables (13 nm core diameter, 1.5 nm sheath thickness) were self-assembled by using insulin fibril templates.

Light transfer from quantum-dot-doped polymer nanowires to silver nanowires

The plasmons of two silver nanowires are simultaneously excited by photoluminescence of the quantum-dot-doped nanowire under 532 nm laser excitation.

Local spectroscopy of silver nanowire in different environments excited with a halogen lamp

We report a propagation spectrum detection system in which one end of a plasmonic silver nanowire is locally illuminated from a normal halogen lamp and the scattered light is recorded spectroscopically at the other end. The system is applied to investigate surface plasmon polariton-Fabry-Perot (SPP-FP) modes of silver nanowires with different lengths at air-glass and oil-glass interfaces. The generalized FP model is used to analyze the spectrum, which fits well with the experimental results. The influence of nanowire length and environment on the properties of the FP resonances is discussed. The propagation spectrum detection system will find applications for integrated optical circuits and plasmonic sensing.