Fluorescence enhancement of molecules inside a gold nanomatryoshka

Enhancing Phototoxicity in Human Colorectal Tumor Cells Through Nanoarchitectonics for Synergistic Photothermal and Photodynamic Therapies

Phototherapies are promising for noninvasive treatment of aggressive tumors, especially when combining heat induction and oxidative processes. Herein, we show enhanced phototoxicity of gold shell-isolated nanorods conjugated with toluidine blue-O (AuSHINRs@TBO) against human colorectal tumor cells (Caco-2) with synergic effects of photothermal (PTT) and photodynamic therapies (PDT). Mitochondrial metabolic activity tests (MTT) performed on Caco-2 cell cultures indicated a photothermal effect from AuSHINRs owing to enhanced light absorption from the localized surface plasmon resonance (LSPR). The phototoxicity against Caco-2 cells was further increased with AuSHINRs@TBO where oxidative processes, such as hydroperoxidation, were also present, leading to a cell viability reduction from 85.5 to 39.0%. The molecular-level mechanisms responsible for these effects were investigated on bioinspired tumor membranes using Langmuir monolayers of Caco-2 lipid extract. Polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) revealed that the AuSHINRs@TBO incorporation is due to attractive electrostatic interactions with negatively charged groups of the Caco-2 lipid extract, resulting in the expansion of surface pressure isotherms. Upon irradiation, Caco-2 lipid extract monolayers containing AuSHINRs@TBO (1:1 v/v) exhibited ca. 1.0% increase in surface area. This is attributed to the generation of reactive oxygen species (ROS) and their interaction with Caco-2 lipid extract monolayers, leading to hydroperoxide formation. The oxidative effects are facilitated by AuSHINRs@TBO penetration into the polar groups of the extract, allowing oxidative reactions with carbon chain unsaturations. These mechanisms are consistent with findings from confocal fluorescence microscopy, where the Caco-2 plasma membrane was the primary site of the cell death induction process.

Au nanodyes as enhanced contrast agents in wide field near infrared fluorescence lifetime imaging

The near-infrared (NIR) range of the electromagnetic (EM) spectrum offers a nearly transparent window for imaging tissue. Despite the significant potential of NIR fluorescence-based imaging, its establishment in basic research and clinical applications remains limited due to the scarcity of fluorescent molecules with absorption and emission properties in the NIR region, especially those suitable for biological applications. In this study, we present a novel approach by combining the widely used IRdye 800NHS fluorophore with gold nanospheres (GNSs) and gold nanorods (GNRs) to create Au nanodyes, with improved quantum yield (QY) and distinct lifetimes. These nanodyes exhibit varying photophysical properties due to the differences in the separation distance between the dye and the gold nanoparticles (GNP). Leveraging a rapid and highly sensitive wide-field fluorescence lifetime imaging (FLI) macroscopic set up, along with phasor based analysis, we introduce multiplexing capabilities for the Au nanodyes. Our approach showcases the ability to differentiate between NIR dyes with very similar, short lifetimes within a single image, using the combination of Au nanodyes and wide-field FLI. Furthermore, we demonstrate the uptake of Au nanodyes by mineral-oil induced plasmacytomas (MOPC315.bm) cells, indicating their potential for in vitro and in vivo applications.

Large Fluorescence Enhancement via Lossless All-Dielectric Spherical Mesocavities

Nano- and microparticles are popular media to enhance optical signals, including fluorescence from a dye proximal to the particle. Here we show that homogeneous, lossless, all-dielectric spheres with diameters in the mesoscale range, between nano- (≲100 nm) and micro- (≳1 μm) scales, can offer surprisingly large fluorescence enhancements, up to F ∼ 104. With the absence of nonradiative Ohmic losses inherent to plasmonic particles, we show that F can increase, decrease or even stay the same with increasing intrinsic quantum yield q0, for suppressed, enhanced or intact radiative decay rates of a fluorophore, respectively. Further, the fluorophore may be located inside or outside the particle, providing additional flexibility and opportunities to design fit for purpose particles. The presented analysis with simple dielectric spheres should spur further interest in this less-explored scale of particles and experimental investigations to realize their potential for applications in imaging, molecular sensing, light coupling, and quantum information processing.

Miniaturized, high numerical aperture confocal fluorescence detection enhanced with pyroelectric droplet accumulation for sub-attomole analyte diagnosis

To meet the growing demand for early fatal disease screening among large populations, current fluorescence detection instruments aiming at point-of-care diagnosis have the tendency to be low cost and high sensitivity, with a high potential for the analysis of low-volume, multiplex analytes with easy operation. In this work, we present the development of a miniaturized, high numerical aperture confocal fluorescence scanner for sub-micro-liter fluid diagnosis. It is enhanced with high-rate analyte accumulation using a pyroelectro-hydrodynamic dispensing system for generating tiny, stable sample droplets. The simplified confocal fluorescence scanner (numerical aperture 0.79, working distance 7.3 mm) uses merely off-the-shelf mass-production optical components. Experimental results show that it can achieve a high-sensitive, cost-efficient detection for sub-micro-liter, low-abundant (0.04 µL, 0.67 attomoles) fluid diagnosis, promising for point-of-care diagnosis.

An Investigation on the Use of Au@SiO2@Au Nanomatryoshkas as Gap-Enhanced Raman Tags

Gap-enhanced Raman tags are a new type of optical probe that have wide applications in sensing and detection. A gap-enhanced Raman tag is prepared by embedding Raman molecules inside a gap between two plasmonic metals such as an Au core and Au shell. Even though placing Raman molecules beneath an Au shell seems counter-intuitive, it has been shown that such systems produce a stronger surface-enhanced Raman scattering response due to the strong electric field inside the gap. While the theoretical support of the stronger electric field inside the gap was provided in the literature, a comprehensive understanding of how the electric field inside the gap compares with that of the outer surface of the particle was not readily available. We investigated Au@SiO2@Au nanoparticles with diameters ranging from 35 nm to 70 nm with varying shell (2.5-10 nm) and gap (2.5-15 nm) thicknesses and obtained both far-field and near-field spectra. The extinction spectra from these particles always have two peaks. The low-energy peak redshifts with the decreasing shell thickness. However, when the gap thickness decreases, the low-energy peaks first blueshift and then redshift, producing a C-shape in the peak position. For every system we investigated, the near-field enhancement spectra were stronger inside the gap than on the outer surface of the nanoparticle. We find that a thin shell combined with a thin gap will produce the greatest near-field enhancement inside the gap. Our work fills the knowledge gap between the exciting potential applications of gap-enhanced Raman tags and the fundamental knowledge of enhancement provided by the gap.

Plasmonic Double-Walled Nanoframes with Face-to-Face Nanogaps for Strong SERS Activity

A synthesis method for plasmonic double-walled nanoframes was developed, where single-walled truncated octahedral nanoframes with (111) open facets and (100) solid flat planes are nested in a core-shell manner. By applying multiple chemical toolkits to Au cuboctahedrons as a starting template, Au double-walled nanoframes with controllable face-to-face nanogaps were successfully synthesized in high homogeneity in size and shape. Importantly, when the gap distance between inner and outer flat walled frames became closer, augmentation of electromagnetic near-field focusing was achieved, leading to generation of hot-zones, which was verified by surface-enhanced Raman spectroscopy. The unique optical property of Au double-walled nanoframes with high structural intricacy was carefully investigated and the SERS substrates comprising Au double-walled nanoframes with the narrowest nanogaps exhibited much improved near-field enhancement toward strongly and/or weakly adsorbing analytes, allowing for gas phase detection in chemical warfare agents, which is a huge challenge in early warning systems.

Gold Nanobipyramids for Near-Infrared Fluorescence-Enhanced Imaging and Treatment of Triple-Negative Breast Cancer

There is an imminent need for novel strategies for the diagnosis and treatment of aggressive triple-negative breast cancer (TNBC). Cell-targeted multifunctional nanomaterials hold great potential, as they can combine precise early-stage diagnosis with local therapeutic delivery to specific cell types. In this study, we used mesoporous silica (MS)-coated gold nanobipyramids (MS-AuNBPs) for fluorescence imaging in the near-infrared (NIR) biological window, along with targeted TNBC treatment. Our MS-AuNBPs, acting partly as light amplification components, allow considerable metal-enhanced fluorescence for a NIR dye conjugated to their surfaces compared to the free dye. Fluorescence analysis confirms a significant increase in the dye's modified quantum yield, indicating that MS-AuNBPs can considerably increase the brightness of low-quantum-yield NIR dyes. Meanwhile, we tested the chemotherapeutic efficacy of MS-AuNBPs in TNBC following the loading of doxorubicin within the MS pores and functionalization to target folate receptor alpha (FRα)-positive cells. We show that functionalized particles target FRα-positive cells with significant specificity and have a higher potency than free doxorubicin. Finally, we demonstrate that FRα-targeted particles induce stronger antitumor effects and prolong overall survival compared to the clinically applied non-targeted nanotherapy, Doxil. Together with their excellent biocompatibility measured in vitro, this study shows that MS-AuNBPs are promising tools to detect and treat TNBCs.

Broadband Transient Response and Wavelength-Tunable Photoacoustics in Plasmonic Hetero-nanoparticles

The optically driven acoustic modes and nonlinear response of plasmonic nanoparticles are important in many applications, but are strongly resonant, which restricts their excitation to predefined wavelengths. Here, we demonstrate that multilayered spherical plasmonic hetero-nanoparticles, formed by alternating layers of gold and silica, provide a platform for a broadband nonlinear optical response from visible to near-infrared wavelengths. They also act as a tunable optomechanical system with mechanically decoupled layers in which different acoustic modes can be selectively switched on/off by tuning the excitation wavelength. These observations not only expand the knowledge about the internal structure of composite plasmonic nanoparticles but also allow for an additional degree of freedom for controlling their nonlinear optical and mechanical properties.

Fluorophore-Decorated Mie Resonant Silicon Nanosphere for Scattering/Fluorescence Dual-Mode Imaging

Inorganic nanoparticles with multiple functions have been attracting attention as multimodal nanoprobes in bioimaging, biomolecule detection, and medical diagnosis and treatment. A drawback of conventional metallic nanoparticle-based nanoprobes is the Ohmic losses that lead to fluorescence quenching of attached molecules and local heating under light irradiation. Here, metal-free nanoprobes capable of scattering/fluorescence dual-mode imaging are developed. The nanoprobes are composed of a silicon nanosphere core having efficient Mie scattering in the visible to near infrared range and a fluorophore doped silica shell. The dark-field scattering and photoluminescence images/spectra for nanoprobes made from different size silicon nanospheres and different kinds of fluorophores are studied by single particle spectroscopy. The fluorescence spectra are strongly modified by the Mie modes of a silicon nanosphere core. By comparing scattering and fluorescence spectra and calculated Purcell factors, the fluorescence enhancement factor is quantitatively discussed. In vitro scattering/fluorescence imaging studies on human cancer cells demonstrate that the developed nanoparticles work as scattering/fluorescence dual-mode imaging nanoprobes.

Coronavirus-mimicking nanoparticles (CorNPs) in artificial saliva droplets and nanoaerosols: Influence of shape and environmental factors on particokinetics/particle aerodynamics

Severe acute respiratory syndrome coronavirus 2, abbreviated as SARS-CoV-2, has been associated with the transmission of infectious COVID-19 disease through breathing and speech droplets emitted by infected carriers including asymptomatic cases. As part of SARS-CoV-2 global pandemic preparedness, we studied the transmission of aerosolized air mimicking the infected person releasing speech aerosol with droplets containing CorNPs using a vibrating mesh nebulizer as human patient simulator. Generally speech produces nanoaerosols with droplets of <5 μm in diameter that can travel distances longer than 1 m after release. It is assumed that speech aerosol droplets are a main element of the current Corona virus pandemic, unlike droplets larger than 5 m, which settle down within a 1 m radius. There are no systemic studies, which take into account speech-generated aerosol/droplet experimental validation and their aerodynamics/particle kinetics analysis. In this study, we cover these topics and explore role of residual water in aerosol droplet stability by exploring drying dynamics. Furthermore, a candle experiment was designed to determine whether air pollution might influence respiratory virus like nanoparticle transmission and air stability.

Plasmonic gadolinium oxide nanomatryoshkas: bifunctional magnetic resonance imaging enhancers for photothermal cancer therapy

Nanoparticle-assisted laser-induced photothermal therapy (PTT) is a promising method for cancer treatment; yet, visualization of nanoparticle uptake and photothermal response remain a critical challenge. Here, we report a magnetic resonance imaging-active nanomatryoshka (Gd₂O₃-NM), a multilayered (Au core/Gd₂O₃ shell/Au shell) sub-100 nm nanoparticle capable of combining T₁ MRI contrast with PTT. This bifunctional nanoparticle demonstrates an r₁ of 1.28 × 10⁸ mM^-1 s^-1, an MRI contrast enhancement per nanoparticle sufficient for T₁ imaging in addition to tumor ablation. Gd₂O₃-NM also shows excellent stability in an acidic environment, retaining 99% of the internal Gd(3). This report details the synthesis and characterization of a promising system for combined theranostic nanoparticle tracking and PTT.

Nonlocal response of plasmonic core-shell nanotopologies excited by dipole emitters

In light of the emergence of nonclassical effects, a paradigm shift in the conventional macroscopic treatment is required to accurately describe the interaction between light and plasmonic structures with deep-nanometer features. Towards this end, several nonlocal response models, supplemented by additional boundary conditions, have been introduced, investigating the collective motion of the free electron gas in metals. The study of the dipole-excited core-shell nanoparticle has been performed, by employing the following models: the hard-wall hydrodynamic model; the quantum hydrodynamic model; and the generalized nonlocal optical response. The analysis is conducted by investigating the near and far field characteristics of the emitter-nanoparticle system, while considering the emitter outside and inside the studied topology. It is shown that the above models predict striking spectral features, strongly deviating from the results obtained via the classical approach, for both simple and noble constitutive metals.

Enhanced photoluminescence and shortened lifetime of DCJTB by photoinduced metal deposition on a ferroelectric lithography substrate

The photodeposition of metallic nanostructures onto ferroelectric surfaces could enable new applications based on the assembly of molecules and patterning local surface reactivity by enhancing surface field intensity. DCJTB (4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran) is an excellent fluorescent dye and dopant material with a high quantum efficiency used for OLED displays on the market. However, how to raise the photoluminescence (PL) and reduce the lifetime of DCJTB in a substrate remain extraordinary challenges for its application. Here, we demonstrate a tunable ferroelectric lithography plasmon-enhanced substrate to generate photo-reduced silver nanoparticles (AgNPs) and achieve enhanced PL with a shortened lifetime depending on the substrate's annealing time. The enhanced PL with shortened lifetimes can attribute to the localized electromagnetic (EM) wave produced by the nanotextured AgNPs layers' surface and gap plasmon resonances. The simulation is based on the three-dimensional finite element method to explain the mechanism of experimental results. Since the absorption increases, the remarkable enhanced PL of DCJTB can attain in the fabricated periodically proton exchanged (PPE) lithium niobate (LiNbO₃) substrate. Furthermore, the proposed fabrication method demonstrates to help tune the surface EM wave distribution in the substrate, which can simultaneously achieve the significantly shortened lifetime and high PL intensity of DCJTB in the substrate. Compared with the un-annealed substrate, the PL intensity of DCJTB in the assembly metallic nanostructures is enhanced 13.70 times, and the PL's lifetime is reduced by 12.50%, respectively. Thus, the fabricated substrate can be a promising candidate, verifying chemically patterned ferroelectrics' satisfaction as a PL-active substrate.

Au-on-Ag nanostructure forin-situSERS monitoring of catalytic reactions

Dual-functionality Au-on-Ag nanostructures (AOA) were fabricated on a silicon substrate by first immobilizing citrate-reduced Ag nanoparticles (Ag NPs, ∼43 nm in diameter), followed by depositing ∼7 nm Au nanofilms (Au NFs) via thermal evaporation. Au NFs were introduced for their catalytic activity in concave-convex nano-configuration. Ag NPs underneath were used for their significant enhancement factor (EF) in surface-enhanced Raman scattering (SERS)-based measurements of analytes of interest. Rhodamine 6G (R6G) was utilized as the Raman-probe to evaluate the SERS sensitivity of AOA. The SERS EF of AOA is ∼37 times than that of Au NPs. Using reduction of 4-nitrothiophenol (4-NTP) by sodium borohydride (NaBH₄) as a model reaction, we demonstrated the robust catalytic activity of AOA as well as its capacity to continuously monitor via SERS the disappearance of reactant 4-NTP, emergence and disappearance of intermediate 4,4'-DMAB, and the appearance of product 4-ATP throughout the reduction process in real-time andin situ.

Establishing design principles for emissive organic SWIR chromophores from energy gap laws

Rational design of bright near and shortwave infrared (NIR: 700-1000 SWIR: 1000- 2000 nm) emitters remains an open question with applications spanning imaging and photonics. Combining experiment and theory, we derive an energy gap quantum yield master equation (EQME), describing the fundamental limits in SWIR quantum yields (ϕ F ) for organic chromophores. Evaluating the photophysics of 21 polymethine NIR/SWIR chromophores to parameterize the EQME, we explain the precipitous decline of ϕ F past 900 nm through decreasing radiative rates and increasing nonradiative losses via high frequency vibrations relating to the energy gap. Using the EQME we develop an energy gap independent ϕ F NIR/SWIR chromophore comparison metric. We show electron donating character on polymethine heterocycles results in relative increases in radiative efficiency obscured by a simultaneous redshift. Finally, the EQME yields rational chromophore design insights shown by how deuteration (backed by our experimental results) or molecular aggregation increases SWIR ϕ F .

Synthesis, Assembly, Optical Properties, and Sensing Applications of Plasmonic Gap Nanostructures

Plasmonic gap nanostructures (PGNs) have been extensively investigated mainly because of their strongly enhanced optical responses, which stem from the high intensity of the localized field in the nanogap. The recently developed methods for the preparation of versatile nanogap structures open new avenues for the exploration of unprecedented optical properties and development of sensing applications relying on the amplification of various optical signals. However, the reproducible and controlled preparation of highly uniform plasmonic nanogaps and the prediction, understanding, and control of their optical properties, especially for nanogaps in the nanometer or sub-nanometer range, remain challenging. This is because subtle changes in the nanogap significantly affect the plasmonic response and are of paramount importance to the desired optical performance and further applications. Here, recent advances in the synthesis, assembly, and fabrication strategies, prediction and control of optical properties, and sensing applications of PGNs are discussed, and perspectives toward addressing these challenging issues and the future research directions are presented.

Theory of molecular emission power spectra. II. Angle, frequency, and distance dependence of electromagnetic environment factor of a molecular emitter in plasmonic environments

Our previous study [S. Wang et al., J. Chem. Phys. 153, 184102 (2020)] has shown that in a complex dielectric environment, molecular emission power spectra can be expressed as the product of the lineshape function and the electromagnetic environment factor (EEF). In this work, we focus on EEFs in a vacuum-NaCl-silver system and investigate molecular emission power spectra in the strong exciton-polariton coupling regime. A numerical method based on computational electrodynamics is presented to calculate the EEFs of single-molecule emitters in a dispersive and lossy dielectric environment with arbitrary shapes. The EEFs in the far-field region depend on the detector position, emission frequency, and molecular orientation. We quantitatively analyze the asymptotic behavior of the EFFs in the far-field region and qualitatively provide a physical picture. The concept of EEF should be transferable to other types of spectra in a complex dielectric environment. Finally, our study indicates that molecular emission power spectra cannot be simply interpreted by the lineshape function (quantum dynamics of a molecular emitter), and the effect of the EEFs (photon propagation in a dielectric environment) has to be carefully considered.

Colloidal Mie resonant silicon nanoparticles

Nano- and microstructures of silicon (Si) exhibit electric and magnetic Mie resonances in the optical regime, providing a novel platform for controlling light at the nanoscale and enhancing light-matter interactions. In this Review, we present recent development of colloidal Si nanoparticles (NPs) that have wide range of applications in nanophotonics. Following brief summary of synthesis methods of amorphous and crystalline Si particles with high sphericity, optical responses of single Si particles placed on a substrate are overviewed. Then, the capability as a nanoantenna to control light-matter interactions is discussed in different systems. Finally, collective optical responses of Si NPs in solution are presented and the application potentials are discussed.

Role of Aqueous-Phase Calcination in Synthesis of Ultra-Stable Dye-Embedded Fluorescent Nanoparticles for Cellular Probing

Fluorescence imaging is a major driver of discovery in biology, and an invaluable asset in clinical diagnostics. To overcome quenching limitations of conventional fluorescent dyes and further improve intensity, nanoparticle-based constructs have been the subject of intense investigation, and within this realm, dye-doped silica-coated nanoparticles have garnered significant attention. Despite their growing popularity in research, fluorescent silica nanoparticles suffer from a significant flaw. The degradation of these nanoparticles in biological media by hydrolytic dissolution is underreported, leading to serious misinterpretations, and limiting their applicability for live cell and in vivo imaging. Here, the development of an ultra-stable, dye-embedded, silica-coated metal nanoparticle is reported, and its superior performance in long-term live cell imaging is demonstrated. While conventional dye-doped silica nanoparticles begin to degrade within an hour in aqueous media, by leveraging a modified liquid calcination process, this new construct is shown to be stable for at least 24 h. The stability of this metal-enhanced fluorescent probe in biologically relevant temperatures and media, and its demonstrated utility for cell imaging, paves the way for its future adoption in biomedical research.

Plasmonic Elliptical Nanohole Arrays for Chiral Absorption and Emission in the Near-Infrared and Visible Range

Chiral plasmonic nanostructures with tunable handedness-dependent absorption in the visible and infrared offer chiro-optical control at the nanoscale. Moreover, coupling them with emitting layers could lead to chiral nanosources, important for nanophotonic circuits. Here, we propose plasmonic elliptical nanohole arrays (ENHA) for circularly dependent near-infrared and visible emission. We first investigate broadband chiral behavior in an Au-ENHA embedded in glass by exciting it with plane waves. We then study the coupling of ENHA with a thin emitting layer embedded in glass; we focus on the emission wavelengths which provided high chirality in plane-wave simulations. Our novel simulation set-up monitors the chirality of the far-field emission by properly averaging a large set of homogeneously distributed, randomly oriented quantum sources. The intrinsic chirality of ENHA influences the circular polarization degree of the emitting layer. Finally, we study the emission dependence on the field distribution at the excitation wavelength. We demonstrate the chiral absorption and emission properties for Au-ENHA emitting in the near-infrared range, and for Ag-ENHA which is excited in green range and emits in the Lumogen Red range. The simple geometry of ENHA can be fabricated with low-cost nanosphere lithography and be covered with emission gel. We thus believe that this design can be of great importance for tunable chiral nanosources.

Gap-enhanced resonance Raman tags for live-cell imaging

Surface-enhanced Raman scattering (SERS) nanotags are widely used in the biomedical field including live-cell imaging due to the high specificity from their fingerprint spectrum and the multiplexing capability from the ultra-narrow linewidth. However, long-term live-cell Raman imaging is limited due to the photodamage from a relatively long exposure time and a high laser power, which are needed for acquiring detectable Raman signals. In this work, we attempt to resolve this issue by developing ultrabright gap-enhanced resonance Raman tags (GERRTs), consisting of a petal-like gold core and a silver shell with the near-infrared resonant reporter of IR-780 embedded in between, for long-term and high-speed live-cell imaging. GERRTs exhibit an ultrahigh Raman intensity down to a single-nanoparticle level in aqueous solution and the solid state upon 785 nm excitation, allowing for high-resolution time-lapse live-cell Raman imaging with an exposure time of 1 ms per pixel and a laser power of 50 μW. Under these measurement conditions, we can possibly capture dynamic cellular processes with a high temporal resolution, and track living cells for long periods of time owing to the reduced photodamage to cells. These nanotags open new opportunities for ultrasensitive, low-phototoxic, and long-term live-cell imaging.

DNA-Engineerable Ultraflat-Faceted Core-Shell Nanocuboids with Strong, Quantitative Plasmon-Enhanced Fluorescence Signals for Sensitive, Reliable MicroRNA Detection

There has been enormous interest in understanding and utilizing plasmon-enhanced fluorescence (PEF) with metal nanostructures, but maximizing the enhancement in a reproducible, quantitative manner while reliably controlling the distance between dyes and metal particle surface for practical applications is highly challenging. Here, we designed and synthesized fluorescence-amplified nanocuboids (FANCs) with highly enhanced and controlled PEF signals, and fluorescent silica shell-coated FANCs (FS-FANCs) were then formed to fixate the dye position and increase particle stability and fluorescence signal intensity for biosensing applications. By uniformly modifying fluorescently labeled DNA on Au nanorods and forming ultraflat Ag shells on them, we were able to reliably control the distance between fluorophores and Ag surface and obtained an ∼186 fluorescence enhancement factor with these FANCs. Importantly, FS-FANCs were utilized as fluorescent nanoparticle tags for microarray-based miRNA detection, and we achieved >10³-fold higher sensitivity than commercially available chemical fluorophores with 100 aM to 1 pM dynamic range.

Recent advances in cancer photo-theranostics: the synergistic combination of transition metal complexes and gold nanostructures

In this mini review, we highlight advances in the last five years in light-activated cancer theranostics by using hybrid systems consisting of transition metal complexes (TMCs) and plasmonic gold nanostructures (AuNPs). TMCs are molecules with attractive properties and high potential in biomedical application. Due to their antiproliferative abilities, platinum-based compounds are currently first-choice drugs for the treatment of several solid tumors. Moreover, ruthenium, iridium and platinum complexes are well-known for their ability to photogenerate singlet oxygen, a highly cytotoxic reactive species with a key role in photodynamic therapy. Their potential is further extended by the unique photophysical properties, which make TMCs particularly suitable for bioimaging. Recently, gold nanoparticles (AuNPs) have been widely investigated as one of the leading nanomaterials in cancer theranostics. AuNPs—being an inert and highly biocompatible material—represent excellent drug delivery systems, overcoming most of the side effects associated with the systemic administration of anticancer drugs. Furthermore, due to the thermoplasmonic properties, AuNPs proved to be efficient nano-sources of heat for photothermal therapy application. Therefore, the hybrid combination TMC/AuNPs could represent a synergistic merger of multiple functionalities for combinatorial cancer therapy strategies. Herein, we report the most recent examples of TMC/AuNPs systems in in-vitro in-vivo cancer tharanostics application whose effects are triggered by light-exposure in the Vis–NIR region, leading to a spatial and temporal control of the TMC/AuNPs activation for light-mediated precision therapeutics.

Batch preparation of gold nanoparticles with highly uniform morphology and tunable plasmonic properties

The plasmonic properties of individual metallic nanostructures are of great importance for application in surface science, materials science, and nanophotonics. Herein, being facilitated with a home-made flow device and pulsed laser irradiation, we proposed a batch preparation protocol towards spherical Au nanoparticles (Au NPs) and cage shell entrapped spherical core nanoparticles (Au@cAu NPs) with highly uniform morphology and a tunable size distribution. The Fano resonance behavior exhibited by the effective interaction between spherical Au NPs and the silicon surface has great potential for the design of ultrasensitive optical sensing devices. In comparison with the spherical Au NP, the individual Au@cAu NP displayed not only a red-shifted and broadened localized surface plasmon resonance (LSPR) scattering peak, but also a higher electromagnetic field enhancement. Therefore, the Au@cAu NPs offer a better choice for plasmonic enhancement-based applications in the red and near-infrared region. In general, the current work provides a new and easy method for the large-scale preparation of gold-based uniform nanostructures, and offers an avenue to understand the interference of different plasmon modes in plasmonic systems, which has potential applications in surface science.

Cyclodextrin-Based Synthesis and Host-Guest Chemistry of Plasmonic Nanogap Particles with Strong, Quantitative, and Highly Multiplexable Surface-Enhanced Raman Scattering Signals

We developed a synthetic strategy to form cyclodextrin-based intrananogap particles (CIPs) with a well-defined ∼1 nm interior gap in a high yield (∼97%), and were able to incorporate 10 different Raman dyes inside the gap using the cyclodextrin-based host-guest chemistry, leading to strong, reproducible, and highly multiplexable surface-enhanced Raman scattering (SERS) signals. The average SERS enhancement factor (EF) for CIPs was 3.0 × 10⁹ with a very narrow distribution of the EFs that range from 9.5 × 10⁸ to 9.5 × 10⁹ for ∼95% of the measured particles. Remarkably, 10 different Raman dyes can be loaded within the nanogap of CIPs, and 6 different Raman dye-loaded CIPs with little spectral overlaps were distinctly detected for cancer cell imaging applications with a single excitation source. Our synthetic strategy provides new platforms in precisely forming plasmonic nanogap structures with all key features for widespread use of SERS including strong signal intensity, reliability in quantification of signal and multiplexing capability.

DNA-Based Plasmonic Heterogeneous Nanostructures: Building, Optical Responses, and Bioapplications

The integration of multiple functional nanoparticles into a specific architecture allows the precise manipulation of light for coherent electron oscillations. Plasmonic metals-based heterogeneous nanostructures are fabricated by using DNA as templates. This comprehensive review provides an overview of the controllable synthesis and self-assembly of heterogeneous nanostructures, and analyzes the effects of structural parameters on the regulation of optical responses. The potential applications and challenges of heterogeneous nanostructures in the fields of biosensors and bioanalysis, in vivo monitoring, and phototheranostics are discussed.

Modification of Mesoporous Silica Surface by Immobilization of Functional Groups for Controlled Drug Release

This paper introduces the synthesis of mesoporous silica nanoparticles (MSNs) with three different groups such as amine, thiol, and sulfonic acid, along the internal surface. Trimethyl[3-(trimethoxysilyl)propyl]ammonium chloride was used to modify the external surface of the nanomaterials. Such materials allow control of the drug release from MSN pores. Multifunctional MSNs were loaded with doxycycline (Doxy) to study their capacities and uploading time. The loading profile indicates that sulfonic groups in the internal surface were the most efficient surfaces with a loading capacity of ca. 35% in 90 min in acidic media.

Plasmon-enhanced fluorescence in gold nanorod-quantum dot coupled systems

Plasmon-exciton coupling is of great importance to many optical devices and applications. One of the coupling manifestations is plasmon-enhanced fluorescence. Although this effect is demonstrated in numerous experimental and theoretical works, there are different particle shapes for which this effect is not fully investigated. In this work electrostatic complexes of gold nanorods and CdSe/CdZnS quantum dots were studied. Double-resonant gold nanorods have an advantage of the simultaneous enhancement of the absorption and emission when the plasmon bands match the excitation and fluorescence wavelengths of an emitter. A relationship between the concentration of quantum dots in the complexes and the enhancement factor was established. It was demonstrated that the enhancement factor is inversely proportional to the concentration of quantum dots. The maximal fluorescence enhancement by 10.8 times was observed in the complex with the smallest relative concentration of 2.5 quantum dots per rod and approximately 5 nm distance between them. Moreover, the influence of quantum dot location on the gold nanorod surface plays an important role. Theoretical study and experimental data indicate that only the position near the nanorod ends provides the enhancement. At the same time, the localization of quantum dots on the sides of the nanorods leads to the fluorescence quenching.

Gap-enhanced Raman tags: fabrication, optical properties, and theranostic applications

Gap-enhanced Raman tags (GERTs) are emerging probes of surface-enhanced Raman scattering (SERS) spectroscopy that have found promising analytical, bioimaging, and theranostic applications. Because of their internal location, Raman reporter molecules are protected from unwanted external environments and particle aggregation and demonstrate superior SERS responses owing to the strongly enhanced electromagnetic fields in the gaps between metal core-shell structures. In this review, we discuss recent progress in the synthesis, simulation, and experimental studies of the optical properties and biomedical applications of novel spherically symmetrical and anisotropic GERTs fabricated with common plasmonic metals—gold (Au) and silver (Ag). Our discussion is focused on the design and synthetic strategies that ensure the optimal parameters and highest enhancement factors of GERTs for sensing and theranostics. In particular, we consider various core-shell structures with build-in nanogaps to explain why they would benefit the plasmonic GERTs as a superior SERS tag and how this would help future research in clinical analytics and therapeutics.

Multicomponent Plasmonic Nanoparticles: From Heterostructured Nanoparticles to Colloidal Composite Nanostructures

Plasmonic nanostructures possessing unique and versatile optoelectronic properties have been vastly investigated over the past decade. However, the full potential of plasmonic nanostructure has not yet been fully exploited, particularly with single-component homogeneous structures with monotonic properties, and the addition of new components for making multicomponent nanoparticles may lead to new-yet-unexpected or improved properties. Here we define the term "multi-component nanoparticles" as hybrid structures composed of two or more condensed nanoscale domains with distinctive material compositions, shapes, or sizes. We reviewed and discussed the designing principles and synthetic strategies to efficiently combine multiple components to form hybrid nanoparticles with a new or improved plasmonic functionality. In particular, it has been quite challenging to precisely synthesize widely diverse multicomponent plasmonic structures, limiting realization of the full potential of plasmonic heterostructures. To address this challenge, several synthetic approaches have been reported to form a variety of different multicomponent plasmonic nanoparticles, mainly based on heterogeneous nucleation, atomic replacements, adsorption on supports, and biomolecule-mediated assemblies. In addition, the unique and synergistic features of multicomponent plasmonic nanoparticles, such as combination of pristine material properties, finely tuned plasmon resonance and coupling, enhanced light-matter interactions, geometry-induced polarization, and plasmon-induced energy and charge transfer across the heterointerface, were reported. In this review, we comprehensively summarize the latest advances on state-of-art synthetic strategies, unique properties, and promising applications of multicomponent plasmonic nanoparticles. These plasmonic nanoparticles including heterostructured nanoparticles and composite nanostructures are prepared by direct synthesis and physical force- or biomolecule-mediated assembly, which hold tremendous potential for plasmon-mediated energy transfer, magnetic plasmonics, metamolecules, and nanobiotechnology.

Nanomaterials for Healthcare Biosensing Applications

In recent years, an increasing number of nanomaterials have been explored for their applications in biomedical diagnostics, making their applications in healthcare biosensing a rapidly evolving field. Nanomaterials introduce versatility to the sensing platforms and may even allow mobility between different detection mechanisms. The prospect of a combination of different nanomaterials allows an exploitation of their synergistic additive and novel properties for sensor development. This paper covers more than 290 research works since 2015, elaborating the diverse roles played by various nanomaterials in the biosensing field. Hence, we provide a comprehensive review of the healthcare sensing applications of nanomaterials, covering carbon allotrope-based, inorganic, and organic nanomaterials. These sensing systems are able to detect a wide variety of clinically relevant molecules, like nucleic acids, viruses, bacteria, cancer antigens, pharmaceuticals and narcotic drugs, toxins, contaminants, as well as entire cells in various sensing media, ranging from buffers to more complex environments such as urine, blood or sputum. Thus, the latest advancements reviewed in this paper hold tremendous potential for the application of nanomaterials in the early screening of diseases and point-of-care testing.

Towards rational design and optimization of near-field enhancement and spectral tunability of hybrid core-shell plasmonic nanoprobes

In biology, sensing is a major driver of discovery. A principal challenge is to create a palette of probes that offer near single-molecule sensitivity and simultaneously enable multiplexed sensing and imaging in the “tissue-transparent” near-infrared region. Surface-enhanced Raman scattering and metal-enhanced fluorescence have shown substantial promise in addressing this need. Here, we theorize a rational design and optimization strategy to generate nanostructured probes that combine distinct plasmonic materials sandwiching a dielectric layer in a multilayer core shell configuration. The lower energy resonance peak in this multi-resonant construct is found to be highly tunable from visible to the near-IR region. Such a configuration also allows substantially higher near-field enhancement, compared to a classical core-shell nanoparticle that possesses a single metallic shell, by exploiting the differential coupling between the two core-shell interfaces. Combining such structures in a dimer configuration, which remains largely unexplored at this time, offers significant opportunities not only for near-field enhancement but also for multiplexed sensing via the (otherwise unavailable) higher order resonance modes. Together, these theoretical calculations open the door for employing such hybrid multi-layered structures, which combine facile spectral tunability with ultrahigh sensitivity, for biomolecular sensing.

Functional Macromolecule-Enabled Colloidal Synthesis: From Nanoparticle Engineering to Multifunctionality

The synthesis of well-defined inorganic colloidal nanostructures using functional macromolecules is an enabling technology that offers the possibility of fine-tuning the physicochemical properties of nanomaterials and has contributed to a broad range of practical applications. The utilization of functional reactive polymers and their colloidal assemblies leads to a high level of control over structural parameters of inorganic nanoparticles that are not easily accessible by conventional methods based on small-molecule ligands. Recent advances in polymerization techniques for synthetic polymers and newly exploited functions of natural biomacromolecules have opened up new avenues to monodisperse and multifunctional nanostructures consisting of integrated components with distinct chemistries but complementary properties. Here, the evolution of colloidal synthesis of inorganic nanoparticles is revisited. Then, the new developments of colloidal synthesis enabled by functional macromolecules and practical applications associated with the resulting optical, catalytic, and structural properties of colloidal nanostructures are summarized. Finally, a perspective on new and promising pathways to novel colloidal nanostructures built upon the continuous development of polymer chemistry, colloidal science, and nanochemistry is provided.

Design and Analysis of a Ag Rhombus Nanoparticle Film-Coupled Plasmonic Nanostructure

We design a coupled plasmonic nanostructure, which consists of a Ag rhombus nanoparticle positioned over a silver film, separated by a dielectric spacer layer, and perform numerical analysis by calculating the radiation loss resistance of this nanostructure as the perfect electric conductor metal based on the theory of transmission line modes. Compared with the nanocube or triangular nanodisk film-coupled plasmonic nanostructures introduced in the previous works, a stronger electric field enhancement was achieved in the Ag rhombus nanoparticle film-coupled nanostructure because of the fact that the sharp tip of the rhombus nanoparticle can generate field enhancement at a hot spot. In order to demonstrate that the sharp tip can confine the electromagnetic energies strongly, we also have calculated the Purcell factor and the far-field directivity of the quantum emitter in the vicinity of this nanostructure.

Rotation of Single-Molecule Emission Polarization by Plasmonic Nanorods

The strong light-matter interactions between dyes and plasmonic nanoantennas enable the study of fundamental molecular-optical processes. Here, we overcome conventional limitations with high-throughput single-molecule polarization-resolved microscopy to measure dye emission polarization modifications upon near-field coupling to a gold nanorod. We determine that the emission polarization distribution is not only rotated toward the nanorod's dominant localized surface plasmon mode as expected, but it is also unintuitively broadened. With a reduced-order analytical model, we elucidate how this distribution broadening depends upon both far-field interference and off-resonant coupling between the molecular dipole and the nanorod transverse plasmon mode. Experiments and modeling reveal that a nearby plasmonic nanoantenna affects dye emission polarization through a multicolor process, even when the orthogonal plasmon modes are separated by approximately 3 times the dye emission line width. Beyond advancing our understanding of plasmon-coupled emission modifications, this work promises to improve high-sensitivity single-molecule fluorescence imaging, biosensing, and spectral engineering.

Electromagnetic energy in multilayered spherical particles

We obtain exact analytic expressions for (i) the electromagnetic energy radial density within and outside a multilayered sphere and (ii) the total electromagnetic energy stored within its core and each of its shells. Explicit expressions for the special cases of lossless core and shell are also provided. The general solution is based on the compact recursive transfer-matrix method, and its validity includes also magnetic media. The theory is illustrated on examples of electric field enhancement within various metallo-dielectric silica-gold multilayered spheres. The user-friendly MATLAB code, which includes the theoretical treatment, is available as a supplement to the paper.

Gold Nanoparticles and Nanorods in Nuclear Medicine: A Mini Review

In the last decade, many innovative nanodrugs have been developed, as well as many nanoradiocompounds that show amazing features in nuclear imaging and/or radiometabolic therapy. Their potential uses offer a wide range of possibilities. It can be possible to develop nondimensional systems of existing radiopharmaceuticals or build engineered systems that combine a nanoparticle with the radiopharmaceutical, a tracer, and a target molecule, and still develop selective nanodetection systems. This review focuses on recent advances regarding the use of gold nanoparticles and nanorods in nuclear medicine. The up-to-date advancements will be shown concerning preparations with special attention on the dimensions and functionalizations that are most used to attain an enhanced performance of gold engineered nanomaterials. Many ideas are offered regarding recent in vitro and in vivo studies. Finally, the recent clinical trials and applications are discussed.

Self-Immolative Fluorescent and Raman Probe for Real-Time Imaging and Quantification of γ-Glutamyl Transpeptidase in Living Cells

Characterizing over-expressed enzymes or biomarkers in living cells is critical for the molecular understanding of disease pathology and consequently for designing precision medicines. Herein, a "switch-on" probe is designed to selectively detect γ-glutamyl transpeptidase (GGT) in living cells via a unique ensemble of enhanced fluorescence and surface-enhanced Raman scattering (SERS). In the presence of GGT, the γ-glutamyl bond in the probe molecule is cleaved, thereby activating a fluorescent probe molecule as well as a Raman reporter molecule. Consequently, the detection of GGT is achieved based on both plasmonic fluorescent enhancement and SERS with a detection limit as low as 1.2 × 10^-3 U/L (normal range for GGT levels in the blood is 9-48 U/L). The main advantage of this platform is that on the occasion of fluorescence signal interference, especially in the presence of free metal ions in cells, the SERS signals still hold high stability as a backup. This work highlights the benefits of the marriage of two complimentary sensing techniques into one platform that can overcome the major obstacles of detection of real-time biomarkers and imaging in living cells.

Fabrication of multicolored patterns based on dye-doped cholesteric liquid crystals

We developed a type of dye-doped cholesteric liquid crystal, which were used for fluorescence enhancement and dual-mode multicolor patterns. We added dye molecules (BBOT, coumarin 6 (C6) and rhodamine B (RhB)) to liquid crystals, and cholesteric liquid crystals (CLC) exhibited selective reflection characteristics. When the reflection wavelength overlaps with the peak of the fluorescent dye, the luminescence intensity of the dye molecules could be adjusted. We used two methods to adjust the reflection wavelength of the cholesteric liquid crystals by changing the content of chiral additives and the isomerization degree of azo molecules. We used the screen printing and stencil printing methods to combine liquid crystal particles containing different fluorescent colors to prepare multicolor patterns. Moreover, the photoisomerization characteristics of the azo molecules were also used to achieve brilliant firework-like images upon exposure to ultraviolet and visible light. In addition, we also realized a face-changing stunt with facial makeup during a performance in the Sichuan Opera, a traditional Chinese folk art. We made use of the difference between reflection color and luminescence intensity upon light irradiation to present orange, green, blue and dark-blue facial effects.

Intracellular and Cellular Detection by SERS-Active Plasmonic Nanostructures

Surface-enhanced Raman scattering (SERS), with greatly amplified fingerprint spectra, holds great promise in biochemical and biomedical research. In particular, the possibility of exciting a library of SERS probes and differentially detecting them simultaneously has stimulated widespread interest in multiplexed biodetection. Herein, recent progress in developing SERS-active plasmonic nanostructures for cellular and intracellular detection is summarized. The development of nanosensors with tailored plasmonic and multifunctional properties for profiling molecular and pathological processes is highlighted. Future challenges towards the routine use of SERS technology in quantitative bioanalysis and clinical diagnostics are further discussed.

Engineered Gold-Based Nanomaterials: Morphologies and Functionalities in Biomedical Applications. A Mini Review

In the last decade, several engineered gold-based nanomaterials, such as spheres, rods, stars, cubes, hollow particles, and nanocapsules have been widely explored in biomedical fields, in particular in therapy and diagnostics. As well as different shapes and dimensions, these materials may, on their surfaces, have specific functionalizations to improve their capability as sensors or in drug loading and controlled release, and/or particular cell receptors ligands, in order to get a definite targeting. In this review, the up-to-date progress will be illustrated regarding morphologies, sizes and functionalizations, mostly used to obtain an improved performance of nanomaterials in biomedicine. Many suggestions are presented to organize and compare the numerous and heterogeneous experimental data, such as the most important chemical-physical parameters, which guide and control the interaction between the gold surface and biological environment. The purpose of all this is to offer the readers an overview of the most noteworthy progress and challenges in this research field.