Dual switchable CRET-induced luminescence of CdSe/ZnS quantum dots (QDs) by the hemin/G-quadruplex-bridged aggregation and deaggregation of two-sized QDs

Native Characterization of Noncanonical Nucleic Acid Thermodynamics via Programmable Dynamic DNA Chemistry

Folding thermodynamics, quantitatively described using parameters such as ΔGfold°, ΔHfold°, and ΔSfold°, is essential for characterizing the stability and functionality of noncanonical nucleic acid structures but remains difficult to measure at the molecular level. Leveraging the programmability of dynamic deoxyribonucleic acid (DNA) chemistry, we introduce a DNA-based molecular tool capable of performing a free energy shift assay (FESA) that directly characterizes the thermodynamics of noncanonical DNA structures in their native environments. FESA operates by the rational design of a reference DNA probe that is energetically equivalent to a target noncanonical nucleic acid structure in a series of toehold-exchange reactions, yet is structurally incapable of folding. As a result, a free energy shift (ΔΔGrxn°) is observed when plotting the reaction yield against the free energy of each toehold-exchange. We mathematically demonstrated that ΔGfold°, ΔHfold°, and ΔSfold° of the analyte can be calculated based on ΔΔGrxn°. After validating FESA using six DNA hairpins by comparing the measured ΔGfold°, ΔHfold°, and ΔSfold° values against predictions made by NUPACK software, we adapted FESA to characterize noncanonical nucleic acid structures, encompassing DNA triplexes, G-quadruplexes, and aptamers. This adaptation enabled the successful characterization of the folding thermodynamics for these complex structures under various experimental conditions. The successful development of FESA marks a paradigm shift and a technical advancement in characterizing the thermodynamics of noncanonical DNA structures through molecular tools. It also opens new avenues for probing fundamental chemical and biophysical questions through the lens of molecular engineering and dynamic DNA chemistry.

Overview on the Development of Electrochemical Immunosensors by the Signal Amplification of Enzyme- or Nanozyme-Based Catalysis Plus Redox Cycling

Enzyme-linked electrochemical immunosensors have attracted considerable attention for the sensitive and selective detection of various targets in clinical diagnosis, food quality control, and environmental analysis. In order to improve the performances of conventional immunoassays, significant efforts have been made to couple enzyme-linked or nanozyme-based catalysis and redox cycling for signal amplification. The current review summarizes the recent advances in the development of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling for signal amplification. The special features of redox cycling reactions and their synergistic functions in signal amplification are discussed. Additionally, the current challenges and future directions of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling are addressed.

Cascaded, Feedback-Driven, and Spatially Localized Emergence of Constitutional Dynamic Networks Driven by Enzyme-Free Catalytic DNA Circuits

The enzyme-free catalytic hairpin assembly (CHA) process is introduced as a functional reaction module for guided, high-throughput, emergence, and evolution of constitutional dynamic networks, CDNs, from a set of nucleic acids. The process is applied to assemble networks of variable complexities, functionalities, and spatial confinement, and the systems provide possible mechanistic pathways for the evolution of dynamic networks under prebiotic conditions. Subjecting a set of four or six structurally engineered hairpins to a promoter P₁ leads to the CHA-guided emergence of a [2 × 2] CDN or the evolution of a [3 × 3] CDN, respectively. Reacting of a set of branched three-arm DNA-hairpin-functionalized junctions to the promoter strand activates the CHA-induced emergence of a three-dimensional (3D) CDN framework emulating native gene regulatory networks. In addition, activation of a two-layer CHA cascade circuit or a cross-catalytic CHA circuit and cascaded driving feedback-driven evolution of CDNs are demonstrated. Also, subjecting a four-hairpin-modified DNA tetrahedron nanostructure to an auxiliary promoter strand simulates the evolution of a dynamically equilibrated DNA tetrahedron-based CDN that undergoes secondary fueled dynamic reconfiguration. Finally, the effective permeation of DNA tetrahedron structures into cells is utilized to integrate the four-hairpin-functionalized tetrahedron reaction module into cells. The spatially localized miRNA-triggered CHA evolution and reconfiguration of CDNs allowed the logic-gated imaging of intracellular RNAs. Beyond the bioanalytical applications of the systems, the study introduces possible mechanistic pathways for the evolution of functional networks under prebiotic conditions.

Switchable and dynamic G-quadruplexes and their applications

G-Quadruplexes attract growing interest as functional constituents in biology, chemistry, nanotechnology, and material science. In particular, the reversible dynamic reconfiguration of G-quadruplexes provides versatile means to switch DNA nanostructures, reversibly control catalytic functions of DNA assemblies, and switch material properties and functions. The present review article discusses the switchable dynamic reconfiguration of G-quadruplexes as central functional and structural motifs that enable diverse applications in DNA nanotechnology and material science. The dynamic reconfiguration of G-quadruplexes has a major impact on the development of DNA switches and DNA machines. The integration of G-quadruplexes with enzymes yields supramolecular assemblies exhibiting switchable catalytic functions guided by dynamic G-quadruplex topologies. In addition, G-quadruplexes act as important building blocks to operate constitutional dynamic networks and transient dissipative networks mimicking complex biological dynamic circuitries. Furthermore, the integration of G-quadruplexes with DNA nanostructures, such as origami tiles, introduces dynamic and mechanical features into these static frameworks. Beyond the dynamic operation of G-quadruplex structures in solution, the assembly of G-quadruplexes on bulk surfaces such as electrodes or nanoparticles provides versatile means to engineer diverse electrochemical and photoelectrochemical devices and to switch the dynamic aggregation/deaggregation of nanoparticles, leading to nanoparticle assemblies that reveal switchable optical properties. Finally, the functionalization of hydrogels, hydrogel microcapsules, or nanoparticle carriers, such as SiO₂ nanoparticles or metal-organic framework nanoparticles, yields stimuli-responsive materials exhibiting shape-memory, self-healing, and controlled drug release properties. Indeed, G-quadruplex-modified nanomaterials find growing interest in the area of nanomedicine. Beyond the impressive G-quadruplex-based scientific advances achieved to date, exciting future developments are still anticipated. The review addresses these goals by identifying the potential opportunities and challenges ahead of the field in the coming years.

Logic-Gated Proximity Aptasensing for Cell-Surface Real-Time Monitoring of Apoptosis

In nature, intact apoptotic cells release ATP as a signaling molecule to trigger prompt phagocytic clearance, even at the earliest stage of apoptosis. Inspired by this, here we introduce a straightforward strategy for real-time monitoring ATP exocytosis and drug-stimulated apoptosis in the cancer cell surroundings. Triplex-boosted G-quadruplexes (tb-G4s) responding to cell environmental factors (H⁺ and K⁺ ) are engineered to construct a DNA logic-gated nanoplatform for proximity ATP aptasensing on the cell surface. It enables the real-time monitoring of cell apoptosis by capturing released endogenous ATP during chemotherapy drug stimulation, providing a sensitive approach for dynamically evaluating drug-induced apoptosis and therapeutic efficacy.

DNA Assembly-Based Stimuli-Responsive Systems

Stimuli-responsive designs with exogenous stimuli enable remote and reversible control of DNA nanostructures, which break many limitations of static nanostructures and inspired development of dynamic DNA nanotechnology. Moreover, the introduction of various types of organic molecules, polymers, chemical bonds, and chemical reactions with stimuli-responsive properties development has greatly expand the application scope of dynamic DNA nanotechnology. Here, DNA assembly-based stimuli-responsive systems are reviewed, with the focus on response units and mechanisms that depend on different exogenous stimuli (DNA strand, pH, light, temperature, electricity, metal ions, etc.), and their applications in fields of nanofabrication (DNA architectures, hybrid architectures, nanomachines, and constitutional dynamic networks) and biomedical research (biosensing, bioimaging, therapeutics, and theranostics) are discussed. Finally, the opportunities and challenges for DNA assembly-based stimuli-responsive systems are overviewed and discussed.

Stimuli-responsive metal-organic framework nanoparticles for controlled drug delivery and medical applications

Stimuli-responsive metal-organic framework nanoparticles, NMOFs, provide a versatile platform for the controlled release of drugs and biomedical applications. The porous structure of NMOFs, their biocompatibility, low toxicity, and efficient permeability turn the NMOFs into ideal carriers for therapeutic applications. Two general methods to gate the drug-loaded NMOFs and to release the loads were developed: by one method, the loaded NMOFs are coated or surface-modified with stimuli-responsive gates being unlocked in the presence of appropriate chemical (e.g., ions or reducing agents), physical (e.g., light or heat), or biomarker (e.g., miRNA or ATP) triggers. By a second approach, the drug-loaded NMOFs include encoded structural information or co-added agents to induce the structural distortion or stimulate the degradation of the NMOFs. Different chemical triggers such as pH changes, ions, ATP, or redox agents, and physical stimuli such as light or heat are applied to degrade the NMOFs, resulting in the release of the loads. In addition, enzymes, DNAzymes, and disease-specific biomarkers are used to unlock the gated NMOFs. The triggered release of drugs for cancer therapy, anti-blood clotting, and the design of autonomous insulin-delivery systems ("artificial pancreas") are discussed. Specifically, multi-drug carrier systems and functional NMOFs exhibiting dual and cooperative therapeutic functions are introduced. The future perspectives and applications of stimuli-responsive particles are addressed.

G-quadruplex-based assay combined with aptamer and gold nanoparticles for Escherichia coli K88 determination

A colorimetric method was developed using G-quadruplex and gold nanoparticles (AuNPs) for determination of Escherichia coli K88 (ETEC K88). It was composed of two modules: (1) an aptamer as biorecognizing element and (2) a capturing DNA (modified with AuNPs at 5') as a transducer. In the absence of target bacteria, the aptamer can form stable double strands with capturing DNA, preventing the binding of capturing DNA to the G-quadruplex. However, the double strands of capturing DNA and aptamer are untied due to the stronger binding of aptamers to bacteria in the presence of target bacteria. As a result, the G-quadruplex binds to capture DNA and leads to the aggregation and color change of AuNPs, which can be monitored by a spectrophotometer or visualization. The quantitative determination was achieved by monitoring the optical density change of AuNPs solution at 524 nm after target addition. Under optimal conditions, the method has a low detection limit (1.35 × 10² CFU mL^-1) and a linear response in the range 10² to 10⁶ CFU mL^-1. Graphical abstract The manuscripts describe a colorimetric method for the detection of ETEC K88 by using intermolecular G-quadruplex to induce the agglomeration of gold nanoparticles, which can be directly used to determine the presence of bacteria with our naked eyes.

Modelling Photosynthesis with ZnII -Protoporphyrin All-DNA G-Quadruplex/Aptamer Scaffolds

All-DNA scaffolds act as templates for the organization of photosystem I model systems. A series of DNA templates composed of Zn^II -protoporphyrin IX (Zn^II PPIX)-functionalized G-quadruplex conjugated to the 3'- or 5'-end of the tyrosinamide (TA) aptamer and Zn^II PPIX/G-quadruplex linked to the 3'- and 5'-ends of the TA aptamer through a four-thymidine bridge. Effective photoinduced electron transfer (ET) from Zn^II PPIX/G-quadruplex to bipyridinium-functionalized tyrosinamide, TA-MV²⁺ , bound to the TA aptamer units is demonstrated. The effectiveness of the primary ET quenching of Zn^II PPIX/G-quadruplex by TA-MV²⁺ controls the efficiency of the generation of TA-MV^+. . The photosystem-controlled formation of TA-MV^+. by the different photosystems dictates the secondary activation of the ET cascade corresponding to the ferredoxin-NADP⁺ reductase (FNR)-catalysed reduction of NADP⁺ to NADPH by TA-MV^+. , and the sequestered alcohol dehydrogenase catalysed reduction of acetophenone to 1-phenylethanol by NADPH.

The combination of ternary electrochemiluminescence system of g-C3N4 nanosheet/TEA/Cu@Cu2O and G-quadruplex-driven regeneration strategy for ultrasensitive bioanalysis

Graphitic carbon nitride nanosheet (g-C₃N₄ NS) with superior photoelectronic properties was served as ECL emitter to in-situ generate Cu@Cu₂O nanoparticles as coreaction accelerator for constructing neoteric ternary ECL system (g-C₃N₄ NS/TEA/Cu@Cu₂O system). Impressively, compared to individual g-C₃N₄ NS, the designed Cu@Cu₂O/g-C₃N₄ NS not only displayed an enhanced current intensity with advance onset potential, but also observed a strong ECL response, which reduced the ECL potential down to 1.3 V for beneficial construction of biosensor, owe to the significant role of Cu@Cu₂O in accelerating the reaction between g-C₃N₄ NS and trimethylamine (TEA). Notably, the enzyme-free target induced recycle amplification was performed to produce two different kinds of single stranded DNAs labeled with ferrocene (Fc, quencher) for the formation of G-quadruplex. Herein, based on the strong ECL signal deriving from the ternary ECL system as a "switch on" mode, and a weak ECL signal due to the co-quenching pattern of ferrocene and hemin as a "switch off" mode, an original "on-off" ECL biosensing platform was developed to ultrasensitively detect microRNA-21. Furthermore, the reversible formation and dissociation of G-quadruplex could achieve the regeneration of ECL biosensor in a rapid step with the aid of potassium ion (K⁺) and 18-crown-6-ether. In addition, the developed strategy exhibited a great sensitivity with a detection limit of 48 aM to pave a path for real applications of biomolecules detection in clinical diagnosis.

Ultrastable Bimolecular G-Quadruplexes Programmed DNA Nanoassemblies for Reconfigurable Biomimetic DNAzymes

The relatively low stability and polymorphism of bimolecular G-quadruplexes (bi-G4s) are big difficulties that are faced in employing them to guide DNA assembly, as they are usually subject to a transformation into more stable tetramolecular or G-wire structures favored by K⁺ or Mg²⁺. Although bi-G4s benefit by additional duplex handles, a challenge remains in tailoring their intrinsic properties to resolve the above difficulties. Toward this challenge, here we engineer several ultrastable bi-G4s via replacing their nucleotide loops with special mini-hairpins, which consist of a GAA loop and a short GC-paired stem. Such a structural alteration favors the formation of G:C:G:C tetrads in the head-to-head folding topologies of bi-G4s and improves their thermal stability, with an increase in the melting temperature by up to 25 °C. It dramatically reduces their structural conversion into G-wires, verified by atomic force microscopy. These features enable the utilization of two well-chosen bi-G4s to shape a DNA nanotriangle into the desired framework nucleic acid (FNA) architectures such as "bowknot" and "butterfly" that are reversibly switched by the bi-G4s. On this basis, we further build a reconfigurable DNAzyme device to mimic the activation of human telomerase that is modulated by the G4 dimerization. Our designed ultrastable bi-G4s will offer a promising tool for dynamically manipulating intracellular DNA nanoassemblies with endogenous K⁺ and exploring the relationship between dimerization and function in some physiological processes.

Bioanalytical Application of Peroxidase-Mimicking DNAzymes: Status and Challenges

DNAzymes with peroxidase-mimicking activity are a new class of catalytically active DNA molecules. This system is formed as a complex of hemin and a G-quadruplex structure created by oligonucleotides rich in guanine. Considering catalytic activity, this DNAzyme mimics horseradish peroxidase, the enzyme most commonly used for signal generation in bioassays. Because DNAzymes exhibit many advantages over protein enzymes (thermal stability, easy and cheap synthesis and purification) they can successfully replace HRP in bioanalytical applications. HRP-like DNAzymes have been applied in the detection of several DNA sequences. Many amplification techniques have been conjugated with DNAzyme systems, resulting in ultrasensitive bioassays. On the other hand, the combination of aptamers and DNAzymes has led to the development of aptazymes for specific targets. An up-to-date summary of the most interesting DNAzyme-based assays is presented here. The elaborated systems can be used in medical diagnosis or chemical and biological studies.

An indirect ELISA-inspired dual-channel fluorescent immunoassay based on MPA-capped CdTe/ZnS QDs

To meet the need for high-throughput immunoassays, many multiplex fluorescent immunoassays have been proposed. Most of them need different kinds of fluorescent label indicators during the test. In this work, a novel indirect ELISA-inspired dual-channel fluorescent immunoassay based on 3-mercaptopropionic acid capped CdTe/ZnS quantum dots (QDs) was constructed. The ELISA wells were coated with two kinds of antigen-QD complex. When the primary antibodies were present in a sample, they mediated the binding of a secondary antibody-DNA-gold nanoparticle complex to the antigen-QD complex. Then the gold nanoparticles quenched the fluorescence of the QDs and a decrease in fluorescence intensity was observed. Thus, the amount of primary antibody could be estimated from the decrease of fluorescence intensity. Owing to the wide absorption range and the relatively narrow emission band of the QDs, the dual-channel fluorescent immunoassay system could work at the same excitation wavelength and the emission wavelengths of each channel had no interference. As a result, two different kinds of primary antibody could be detected at the same time in one ELISA well, which simplified the operation and greatly improved the efficiency. Besides, only one type of secondary antibody needs to be added to the prepared microtiter plates, which further simplified the operation during the detection procedure. This dual-channel fluorescent immunoassay system will provide new insights into high-throughput immunodetection. Graphical abstract.

Construction of Tetrahedral DNA-Quantum Dot Nanostructure with the Integration of Multistep Förster Resonance Energy Transfer for Multiplex Enzymes Assay

Three-dimensional (3D) DNA scaffolds with well-defined structure and high controllability hold promising potentials for biosensing and drug delivery. However, most of 3D DNA scaffolds can detect only a single type of molecule with the involvement of complex logic operations. Herein, we develop a 3D DNA nanostructure with the capability of multiplexed detection by exploiting a multistep Förster resonance energy transfer (FRET). The tetrahedron-structured DNA is constructed by four oligonucleotide strands and is subsequently conjugated to a streptavidin-coated quantum dot (QD) to obtain a QD-Cy3-Texas Red-Cy5 tetrahedron DNA. This QD-Cy3-Texas Red-Cy5 tetrahedral DNA nanostructure has well-defined dye-to-dye spacing and high controllability for energy transfer between intermediary acceptors and terminal acceptors, enabling the generation of multistep FRET between the QD and three dyes (i.e., Cy3, Texas Red, and Cy5) for simultaneous detection of multiple endonucleases and methyltransferases even in complex biological samples as well as the screening of multiple enzyme inhibitors.

Highly sensitive glutathione assay and intracellular imaging with functionalized semiconductor quantum dots

Glutathione (GSH) plays a vital role in biological systems and is associated with human pathology. The engineering of semiconductor quantum dots (QDs) as fluorescent probes for GSH sensing and bioimaging is a potential yet rarely reported approach. Herein, we report the in situ growth of manganese dioxide nanosheets (MnO2) on silica-coated semiconductor quantum dots (QD@SiO2), to prepare a stable and biocompatible fluorescent nanoprobe (QD@SiO2-MnO2) for the selective and sensitive detection of GSH. The modification of QD@SiO2 with MnO2 significantly quenched the fluorescence of CdSe/ZnS QDs, yet the addition of GSH efficiently recovered the fluorescence of the nanoprobe due to the decomposition of MnO2 by GSH. This nanosensor showed a rapid response to GSH with a low detection limit, and high selectivity towards GSH over potential interferences. Furthermore, the MnO2-engineered QDs had good biocompatibility and cellular uptake ability, and were successfully applied for the real-time imaging of intracellular GSH. We envision that semiconductor QD-based probes will stimulate the study of GSH dynamics and facilitate the understanding of GSH-related pathophysiological events.

Stimuli-Responsive DNA-Switchable Biointerfaces

Switchable interfaces, also known as smart interfaces, can alter their macroscopic properties in response to external stimuli. Compared to an artificial switchable interface, DNA-based switchable biointerfaces have high diversity, uniformity, reproducibility, and functionality and are easily designed and developed with atomic precision because the sequence of the DNA strand strictly governs the structural and active properties of its assembly. Moreover, various structures such as double strands based on the Watson-Crick base-pairing rule, G-quadruplexes, i-Motifs, triplexes, and parallel-stranded duplexes exist between or among DNA strands to enrich the structures of DNA biointerfaces. In this article, the design, stimulus responses, and applications of switchable DNA biointerfaces were discussed in terms of single-switch, dual-response, and sequential operation. The applications related to sensing, imaging, delivery, logic gates, and nanomechines were introduced in terms of the design and construction of DNA biointerfaces. Future directions and challenges were also outlined for this rapidly emerging field.

Non-Cross-Linking Aggregation of DNA-Carrying Polymer Micelles Triggered by Duplex Formation

Colloidal behaviors of particles functionalized with biomolecules are generally complicated. This study describes that colloidal behaviors of double-stranded (ds) DNA-carrying polymer micelles are well controlled by altering the molar ratio of single-stranded (ss) DNA moiety in the dsDNA shell. ssDNA-carrying micelles composed of a poly( N-isopropylacrylamide) (PNIPAAm) core surrounded by a dense shell of ssDNAs were prepared through self-assembly of PNIPAAm grafted with ssDNA by incubating its solution above the lower critical solution temperature. Spontaneous, non-cross-linking aggregation of the micelles was triggered by DNA duplex formation on the surface. Comparison of the critical coagulation concentration of NaCl among a series of the DNA-carrying micelles revealed the relationship between the helical structure of the surface-bound DNA and the colloidal stability of the micelles. The electrophoretic mobility analysis of the micelles indicated that the duplex formation reduced the structural flexibility of the surface-bound DNA, thereby decreasing the interparticle entropic repulsion. It is also suggested that the augmented rigidity of the surface-bound DNA increases the number of terminal base pairs facing the solvent, which could lead to multiple blunt-end stacking interaction among the micelles. Therefore, small DNA molecules could be considered unique surface-modifiers capable of controlling interactions between the surfaces of materials.

Controlling the Catalytic and Optical Properties of Aggregated Nanoparticles or Semiconductor Quantum Dots Using DNA-Based Constitutional Dynamic Networks

Nucleic acid-based constitutional dynamic networks (CDNs) attract growing interest as a means to mimic complex biological networks. The triggered stabilization of the CDNs allows the dictated guided reversible reconfiguration and re-equilibration of the CDNs to other CDN configurations, where some of the constituents are up-regulated, while other constituents are down-regulated. Although substantial progress in controlling the adaptive dynamic control of the compositions of networks by means of auxiliary triggers was demonstrated, the use of CDNs as active ensembles for controlling chemical functionalities is still a challenge. We report on the assembly of signal-triggered CDN systems that guide the switchable aggregation of Au nanoparticles (NPs), thereby controlling their plasmonic properties and their catalytic functions (Au NPs-catalyzed oxidation of l-DOPA to dopachrome). In addition, we demonstrate that the triggered and orthogonal up-regulation and down-regulation of the constituents of the CDNs leads to the dictated aggregation of different-sized CdSe/ZnS quantum dots (QDs), cross-linked by K⁺-ion-stabilized G-quadruplex units. The incorporation of hemin into the G-quadruplex cross-linking units yields horseradish peroxidase-mimicking DNAzyme units that catalyze the generation of chemiluminescence via the oxidation of luminol by H₂O₂. The resulting chemiluminescence stimulates the chemiluminescence resonance energy transfer (CRET) process to the QDs, resulting in the luminescence of the two-sized QDs. By the application of appropriate triggers, the CDN-dictated up-regulation and down-regulation of the different-sized QDs aggregates are demonstrated, and the control over the photophysical functions of the different-sized QDs, by means of the CDNs, is highlighted.

A new electrochemical immunoassay for prion protein based on hybridization chain reaction with hemin/G-quadruplex DNAzyme

In this work, a new electrochemical immunosensor was developed for prion protein assay based on hybridization chain reaction (HCR) with hemin/G-quadruplex DNAzyme for signal amplification. In this amplification system, the hemin/G-quadruplex DNAzyme simultaneously mimicked the biocatalytic functions for H₂O₂ reduction and L-cysteine oxidation. In the presence of L-cysteine, the hemin/G-quadruplex catalyzed the oxidation of L-cysteine to L-cystine. At the same time, H₂O₂ was produced under the oxygen condition. Then, the hemin/G-quadruplex could quickly catalyze the reduction of H₂O₂, mimicking the catalytic performance of horseradish peroxidase (HRP). Under the optimal conditions, the immunosensor showed a wide linear response range from 0.5 pg/mL to 100 ng/mL with the low detection limit of 0.38 pg/mL (3σ). By changing the specific antibody, this strategy could be easily extended to detect the infectious isoform of prion (PrP^Sc) and other proteins. Based on its good analytical performance, the developed method shows great potential applications in diagnosis of prion diseases at presymptomatic stage and bioanalysis.

Development of quantum dot-based biosensors: principles and applications

We review the recent advances in quantum dot-based biosensors and focus on quantum dot-based fluorescent, bioluminescent, chemiluminescent, and photoelectrochemical biosensors.

Orthogonal Operation of Constitutional Dynamic Networks Consisting of DNA-Tweezer Machines

Overexpression or down-regulation of cellular processes are often controlled by dynamic chemical networks. Bioinspired by nature, we introduce constitutional dynamic networks (CDNs) as systems that emulate the principle of the nature processes. The CDNs comprise dynamically interconvertible equilibrated constituents that respond to external triggers by adapting the composition of the dynamic mixture to the energetic stabilization of the constituents. We introduce a nucleic acid-based CDN that includes four interconvertible and mechanically triggered tweezers, AA', BB', AB' and BA', existing in closed, closed, open, and open configurations, respectively. By subjecting the CDN to auxiliary triggers, the guided stabilization of one of the network constituents dictates the dynamic reconfiguration of the structures of the tweezers constituents. The orthogonal and reversible operations of the CDN DNA tweezers are demonstrated, using T-A·T triplex or K⁺-stabilized G-quadruplex as structural motifs that control the stabilities of the constituents. The implications of the study rest on the possible applications of input-guided CDN assemblies for sensing, logic gate operations, and programmed activation of molecular machines.

Triplex DNA Nanostructures: From Basic Properties to Applications

Triplex nucleic acids have recently attracted interest as part of the rich "toolbox" of structures used to develop DNA-based nanostructures and materials. This Review addresses the use of DNA triplexes to assemble sensing platforms and molecular switches. Furthermore, the pH-induced, switchable assembly and dissociation of triplex-DNA-bridged nanostructures are presented. Specifically, the aggregation/deaggregation of nanoparticles, the reversible oligomerization of origami tiles and DNA circles, and the use of triplex DNA structures as functional units for the assembly of pH-responsive systems and materials are described. Examples include semiconductor-loaded DNA-stabilized microcapsules, DNA-functionalized dye-loaded metal-organic frameworks (MOFs), and the pH-induced release of the loads. Furthermore, the design of stimuli-responsive DNA-based hydrogels undergoing reversible pH-induced hydrogel-to-solution transitions using triplex nucleic acids is introduced, and the use of triplex DNA to assemble shape-memory hydrogels is discussed. An outlook for possible future applications of triplex nucleic acids is also provided.

Bioresponsive Release System for Visual Fluorescence Detection of Carcinoembryonic Antigen from Mesoporous Silica Nanocontainers Mediated Optical Color on Quantum Dot-Enzyme-Impregnated Paper

An all-in-one paper-based analytical device (PAD) was successfully developed for visual fluorescence detection of carcinoembryonic antigen (CEA) on CdTe/CdSe quantum dot (QD)-enzyme-impregnated paper by coupling with a bioresponsive controlled-release system from DNA-gated mesoporous silica nanocontainers (MSNs). The assay was carried out in a centrifuge tube by using glucose-loaded MSNs with a CEA aptamer and a QD-enzyme-paper attached on the lid. Initially, single-strand complementary DNA to a CEA aptamer was covalently conjugated to the aminated MSN, and then glucose (enzyme substrate) molecules were gated into the pore with the help of the aptamer. Glucose oxidase (GOD) and CdTe/CdSe QDs were coimmobilized on paper for the visual fluorescence signal output. Upon target CEA introduction in the detection cell, the analyte specifically reacted with the immobilized aptamer on the MSN to open the pore, thereby resulting in the glucose release. The released glucose was oxidized by the immobilized GOD on paper to produce gluconic acid and hydrogen peroxide, and the latter quenched the fluorescence of CdTe/CdSe QDs, which could be determined by the naked eye on a portable smartphone and a commercial fluorospectrometer. Under optimal conditions, the PAD-based sensing system enabled sensitive discrimination of target CEA against other biomarkers or proteins in a linear range of 0.05-20 ng mL^-1 with a limit of detection of 6.7 pg mL^-1 (ppt). In addition, our strategy displayed high specificity, good reproducibility, and acceptable accuracy for analyzing human serum specimens with a commercial human CEA ELISA kit. Importantly, this methodology offers promise for simple analysis of biological samples and is suitable for use in the mass production of miniaturized devices, thus opening new opportunities for protein diagnostics and biosecurity.

A selective and label-free strategy for rapid screening of telomere-binding Ligands via fluorescence regulation of DNA/silver nanocluster

Herein, the conformational switch of G-rich oligonucleotide (GDNA) demonstrated the obvious functional switch of GDNA which was found to significantly affect the fluorescence of the in-situ synthesized DNA/silver nanocluster (DNA-AgNC) in homogeneous solution. We envisioned that the allosteric interaction between GDNA and DNA-AgNC would be possible to be used for screening telomere-binding ligands. A unimolecular probe (12C5TG) is ingeniously designed consisting of three contiguous DNA elements: G-rich telomeric DNA (GDNA) as molecular recognition sequence, T-rich DNA as linker and C-rich DNA as template of DNA-AgNC. The quantum yield and stability of 12C5TG-AgNC is greatly improved because the nearby deoxyguanosines tended to protect DNA/AgNC against oxidation. However, in the presence of ligands, the formation of G-quadruplex obviously quenched the fluorescence of DNA-AgNC. By taking full advantage of intramolecular allosteric effect, telomere-binding ligands were selectively and label-free screened by using deoxyguanines and G-quadruplex as natural fluorescence enhancer and quencher of DNA-AgNC respectively. Therefore, the functional switching of G-rich structure offers a cost-effective, facile and reliable way to screen drugs, which holds a great potential in bioanalysis as well.

Aptamer-Based K(+) Sensor: Process of Aptamer Transforming into G-Quadruplex

G-rich aptamers have been widely applied to develop various sensors for detecting proteins, small molecules, and cations, which is based on the target-induced conformational transfer from single strand to G-quadruplex. However, the transforming process is unclear. Here, with PW17 as an aptamer example, the forming process of G-quadruplex induced by K(+) is investigated by circular dichroism spectroscopy, electrospray ionization mass spectroscopy, and native gel electrophoresis. The results demonstrate that PW17 undergoes a conformational transforming process from loose and unstable to compact and stable G-quadruplex, which is strictly K(+) concentration-dependent. The process contains three stages: (1) K(+) (<0.5 mM) could induce PW17 forming a loose and unstable G-quadruplex; (2) the compact and stable K(+)-stabilized G-quadruplex is almost formed when K(+) is equal to or larger than 7 mM; and (3) when K(+) ranges from 0.5 mM to 7 mM, the transformation of K(+)-stabilized PW17 from loose and unstable to compact and stable occurs. Interestingly, dimeric G-quadruplex through 5'-5' stacking is involved in the forming process until completely formed at 40 mM K(+). Moreover, the total process is thermodynamically controlled. With PW17 as a sensing probe and PPIX as a fluorescent probe for detection of K(+), three linear fluorescent ranges are observed, which corresponds to the three forming stages of G-quadruplex. Clarifying the forming process provides a representative example to deeply understand and further design aptamer-based biosensers and logic devices.

In Situ Generation and Consumption of H2O2 by Bienzyme-Quantum Dots Bioconjugates for Improved Chemiluminescence Resonance Energy Transfer

Exploration of quantum dots (QDs) as energy acceptors revolutionizes the current chemiluminescence resonance energy transfer (CRET), since QDs possess large Stokes shifts and high luminescence efficiency. However, the strong and high concentration of oxidant (typically H2O2) needed for luminol chemiluminescence (CL) reaction could cause oxidative quenching to QDs, thereby decreasing the CRET performance. Here we proposed the use of bienzyme-QDs bioconjugate as the energy acceptor for improved CRET sensing. Two enzymes, one for H2O2 generation (oxidase) and another for H2O2 consumption (horseradish peroxidase, HRP), were bioconjugated onto the surface of QDs. The bienzyme allowed fast in situ cascaded H2O2 generation and consumption, thus alleviating fluorescence quenching of QDs. The nanosized QDs accommodate the two enzymes in a nanometric range, and the CL reaction was confined on the surface of QDs accordingly, thereby amplifying the CL reaction rate and improving CRET efficiency. As a result, CRET efficiency of 30-38% was obtained; the highest CRET efficiency by far was obtained using QDs as the energy acceptor. The proposed CRET system could be explored for ultrasensitive sensing of various oxidase substrates (here exemplified with cholesterol, glucose, and benzylamine), allowing for quantitative measurement of a spectrum of metabolites with high sensitivity and specificity. Limits of detection (LOD, 3σ) for cholesterol, glucose, and benzylamine were found to be 0.8, 3.4, and 10 nM, respectively. Furthermore, multiparametric blood analysis (glucose and cholesterol) is demonstrated.

An ion-controlled four-color fluorescent telomeric switch on DNA origami structures

The folding of single-stranded telomeric DNA into guanine (G) quadruplexes is a conformational change that plays a major role in sensing and drug targeting. The telomeric DNA can be placed on DNA origami nanostructures to make the folding process extremely selective for K(+) ions even in the presence of high Na(+) concentrations. Here, we demonstrate that the K(+)-selective G-quadruplex formation is reversible when using a cryptand to remove K(+) from the G-quadruplex. We present a full characterization of the reversible switching between single-stranded telomeric DNA and G-quadruplex structures using Förster resonance energy transfer (FRET) between the dyes fluorescein (FAM) and cyanine3 (Cy3). When attached to the DNA origami platform, the G-quadruplex switch can be incorporated into more complex photonic networks, which is demonstrated for a three-color and a four-color FRET cascade from FAM over Cy3 and Cy5 to IRDye700 with G-quadruplex-Cy3 acting as a switchable transmitter.

A nucleic acid strand displacement system for the multiplexed detection of tuberculosis-specific mRNA using quantum dots

The development of rapid, robust and high performance point-of-care diagnostics relies on the advancement and combination of various areas of research. We have developed an assay for the detection of multiple mRNA molecules that combines DNA nanotechnology with fluorescent nanomaterials. The core switching mechanism is toehold-mediated strand displacement. We have used fluorescent quantum dots (QDs) as signal transducers in this assay, as they bring many benefits including bright fluorescence and multiplexing abilities. The resulting assay is capable of multiplexed detection of long RNA targets against a high concentration of background non-target RNA, with high sensitivity and specificity and limits of detection in the nanomolar range using only a standard laboratory plate reader. We demonstrate the utility of our QD-based system for the detection of two genes selected from a microarray-derived tuberculosis-specific gene expression signature. Levels of up- and downregulated gene transcripts comprising this signature can be combined to give a disease risk score, making the signature more amenable for use as a diagnostic marker. Our QD-based approach to detect these transcripts could pave the way for novel diagnostic assays for tuberculosis.

Biochemical and Biophysical Understanding of Metal Ion Selectivity of DNAzymes

This review summarizes research into the metal-binding properties of catalytic DNAzymes, towards the goal of understanding the structural properties leading to metal ion specificity. Progress made and insight gained from a range of biochemical and biophysical techniques are covered, and promising directions for future investigations are discussed.

Layered Metal Nanoparticle Structures on Electrodes for Sensing, Switchable Controlled Uptake/Release, and Photo-electrochemical Applications

Layered metal nanoparticle (NP) assemblies provide highly porous and conductive composites of unique electrical and optical (plasmonic) properties. Two methods to construct layered metal NP matrices are described, and these include the layer-by-layer deposition of NPs, or the electropolymerization of monolayer-functionalized NPs, specifically thioaniline-modified metal NPs. The layered NP composites are used as sensing matrices through the use of electrochemistry or surface plasmon resonance (SPR) as transduction signals. The crosslinking of the metal NP composites with molecular receptors, or the imprinting of molecular recognition sites into the electropolymerized NP matrices lead to selective and chiroselective sensing interfaces. Furthermore, the electrosynthesis of redox-active, imprinted, bis-aniline bridged Au NP composites yields electrochemically triggered "sponges" for the switchable uptake and release of electron-acceptor substrates, and results in conductive surfaces of electrochemically controlled wettability. Also, photosensitizer-relay-crosslinked Au NP composites, or electrochemically polymerized layered semiconductor quantum dot/metal NP matrices on electrodes, are demonstrated as functional nanostructures for photoelectrochemical applications.

An engineered coiled-coil polypeptide assembled onto quantum dots for targeted cell imaging

Quantum dot (QD)-polypeptide probes have been developed through the specific metal-affinity interaction between polypeptides appended with N-terminal polyhistidine sequences and CdSe/ZnS core-shell QDs. The size and charge of a QD-polypeptide can be tuned by using different coiled-coil polypeptides. Compared to glutathione-capped QDs (QD-GSH), QD-polypeptide probes showed an approximately two- to three-fold luminescence increase, and the luminescence increase was not obviously related to the charge of the polypeptide. QD-polypeptide probes with different charge have a great effect on nonspecific cellular uptake. QD-polypeptide probes with negative charge exhibited lower nonspecific cellular uptake in comparison to the QD-GSH, while positively charged QD-polypeptide probes presented higher cellular uptake than the QD-GSH. A targeted QD-ARGD probe can obviously increase targeted cellular uptake in α v β 3 overexpressing HeLa cells compared to QD-A. In addition, QD-polypeptide probes showed lower in vitro cytotoxicity compared to the original QDs. These results demonstrate that these QD-polypeptide probes with high specific cellular uptake, high fluorescence intensity and low background noise are expected to have great potential applications in targeted cell imaging.

Controlling Motion at the Nanoscale: Rise of the Molecular Machines

As our understanding and control of intra- and intermolecular interactions evolve, ever more complex molecular systems are synthesized and assembled that are capable of performing work or completing sophisticated tasks at the molecular scale. Commonly referred to as molecular machines, these dynamic systems comprise an astonishingly diverse class of motifs and are designed to respond to a plethora of actuation stimuli. In this Review, we outline the conditions that distinguish simple switches and rotors from machines and draw from a variety of fields to highlight some of the most exciting recent examples of opportunities for driven molecular mechanics. Emphasis is placed on the need for controllable and hierarchical assembly of these molecular components to display measurable effects at the micro-, meso-, and macroscales. As in Nature, this strategy will lead to dramatic amplification of the work performed via the collective action of many machines organized in linear chains, on functionalized surfaces, or in three-dimensional assemblies.

Metalloporphyrin/G-quadruplexes: From basic properties to practical applications

Guanine-rich single-stranded nucleic acids self-assemble into G-quadruplex nanostructures (predominately in the presence of K +-ions). Metalloporphyrins bind to the G-quadruplex nanostructures to form supramolecular assemblies exhibiting unique catalytic, electrocatalytic and photophysical properties. This paper addresses the advances in the characterization and the implementation of the metalloporphyrin/G-quadruplexes complexes for various applications. Out of the different complexes, the most extensively studied complexes are the hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme and the Zn(II) -protoporphyrin IX-functionalized G-quadruplex. Specifically, the hemin/G-quadruplex was found to act as a catalyst for driving different chemical transformations that mimic the native horseradish peroxidase enzyme, and, also, to function as an electrocatalyst for the reduction of H 2 O 2. Also, the hemin/G-quadruplex stimulates interesting photophysical and photocatalytic processes such as the electron-transfer quenching of semiconductor quantum dots or the chemiluminescence resonance energy transfer to semiconductor quantum dots. Alternatively, Zn(II) -protoporphyrin IX associated with G-quadruplexes exhibit intensified fluorescence properties. Beyond the straight forward application of the metalloporphyrin/G-quadruplexes as catalysts that stimulate different chemical transformations, the specific catalytic, electrocatalytic and photocatalytic functions of hemin/G-quadruplexes are heavily implemented to develop sophisticated colorimetric, electrochemical, and optical sensing platforms. Also, the unique fluorescence properties of Zn(II) -protoporphyrin IX-functionalized G-quadruplexes are applied to develop fluorescence sensing platforms. The article exemplifies different sensing assays for analyzing DNA, ligand-aptamer complexes and telomerase activity using the metalloporphyrins/G-quadruplexes as transducing labels. Also, the use of the hemin/G-quadruplex as a probe to follow the operations of DNA machines is discussed.

Switchable catalytic DNA catenanes

Two-ring interlocked DNA catenanes are synthesized and characterized. The supramolecular catenanes show switchable cyclic catalytic properties. In one system, the catenane structure is switched between a hemin/G-quadruplex catalytic structure and a catalytically inactive state. In the second catenane structure the catenane is switched between a catalytically active Mg(2+)-dependent DNAzyme-containing catenane and an inactive catenane state. In the third system, the interlocked catenane structure is switched between two distinct catalytic structures that include the Mg(2+)- and the Zn(2+)-dependent DNAzymes.

A hot-spot-active magnetic graphene oxide substrate for microRNA detection based on cascaded chemiluminescence resonance energy transfer

Herein, a cascaded chemiluminescence resonance energy transfer (C-CRET) process was demonstrated from horseradish peroxidase (HRP)-mimicking DNAzyme-catalyzed luminol-H2O2 to fluorescein and further to graphene oxide (GO) when HRP-mimicking DNAzyme/fluorescein was in close proximity to the GO surface. The proposed C-CRET system was successfully implemented to construct three modes of C-CRET hot-spot-active substrates (modes I, II and III) by covalently immobilizing HRP-mimicking DNAzyme/fluorescein-labeled hairpin DNAs (hot-spot-generation probes) on magnetic GO (MGO), resulting in a signal "off" state due to the quenching of the luminol/H2O2/HRP-mimicking DNAzyme/fluorescein CRET system by GO. Upon the introduction of microRNA-122 (miRNA-122), the targets (mode I) or the new triggers that were generated through a strand displacement reaction (SDR) initiated by miRNA-122 (modes II and III) hybridized with the loop domains of hairpin probes on MGO to form double-stranded (modes I and II) or triplex-stem structures (mode III), causing an "open" configuration of the hairpin probe and a CRET signal "on" state, thus achieving sensitive and selective detection of miRNA-122. More importantly, the substrate exhibited excellent controllability, reversibility and reproducibility through SDR and magnetic separation (modes II and III), especially sequence-independence for hairpin probes in mode III, holding great potential for the development of a versatile platform for optical biosensing.