Solution-processable singlet fission photovoltaic devices

Computational Discovery of Intermolecular Singlet Fission Materials Using Many-Body Perturbation Theory

Intermolecular singlet fission (SF) is the conversion of a photogenerated singlet exciton into two triplet excitons residing on different molecules. SF has the potential to enhance the conversion efficiency of solar cells by harvesting two charge carriers from one high-energy photon, whose surplus energy would otherwise be lost to heat. The development of commercial SF-augmented modules is hindered by the limited selection of molecular crystals that exhibit intermolecular SF in the solid state. Computational exploration may accelerate the discovery of new SF materials. The GW approximation and Bethe-Salpeter equation (GW+BSE) within the framework of many-body perturbation theory is the current state-of-the-art method for calculating the excited-state properties of molecular crystals with periodic boundary conditions. In this Review, we discuss the usage of GW+BSE to assess candidate SF materials as well as its combination with low-cost physical or machine learned models in materials discovery workflows. We demonstrate three successful strategies for the discovery of new SF materials: (i) functionalization of known materials to tune their properties, (ii) finding potential polymorphs with improved crystal packing, and (iii) exploring new classes of materials. In addition, three new candidate SF materials are proposed here, which have not been published previously.

Measuring Intermolecular Excited State Geometry for Favorable Singlet Fission in Tetracene

Singlet fission (SF) is the process of converting an excited singlet to a pair of excited triplets. Harvesting two charges from a single photon has the potential to increase photovoltaic device efficiencies. Acenes, such as tetracene and pentacene, are model molecules for studying SF. Despite SF being an endoergic process for tetracene and exoergic for pentacene, both acenes exhibit near unity SF quantum efficiencies, raising questions about how tetracene can overcome the energy barrier. Here, we use recently developed instrumentation to measure inelastic neutron scattering (INS) while optically exciting the model molecules using two different excitation energies. The spectroscopic results reveal intermolecular structural relaxation due to the presence of a triplet excited state. The structural dynamics of the combined excited state molecule and surrounding tetracene molecules are further studied using time-dependent density functional theory (TD-DFT), which shows that the singlet and triplet levels shift due to the excited state geometry, reducing the uphill energy barrier for SF to within kT.

Above 100% Efficiency Photocharge Generation in Monolayer Semiconductors by Singlet Fission Sensitization

Sensitizing inorganic semiconductors using singlet fission (SF) materials, which produce two excitons from one absorbed photon, can potentially boost their light-to-electricity conversion efficiency. The SF sensitization is particularly exciting for two-dimensional (2D) layered semiconductors with atomically flat surface and high carrier mobility but limited light absorption. However, efficiently harnessing triplet excitons from SF by charge transfer at organic/inorganic interface has been challenging, and the intricate interplay among competing processes remains unresolved. Here, we investigate SF sensitization in high-quality organic/2D bilayer heterostructures featuring TIPS-Pc single crystals. Through transient magneto-optical spectroscopy, we demonstrate that despite an ultrafast SF process in sub-100 fs, a significant fraction of singlet excitons in TIPS-Pc dissociate at the interface before fission, while triplet excitons from SF undergo diffusion-limited charge transfer at the interface in ∼10 ps to ns. Remarkably, the photocharge generation efficiency reaches 126% in heterostructures with optimal thickness, resulting from the competitive interplay between singlet exciton fission, dissociation, and triplet exciton transport. This presents a promising strategy for advancing SF-enhanced 2D optoelectronics beyond the conventional limits.

Phenyl-Substituted Cibalackrot Derivatives: Synthesis, Structure, and Solution Photophysics

Three symmetrically and three unsymmetrically substituted cibalackrot (7,14-diphenyldiindolo[3,2,1-de:3',2',1'-ij][1,5]naphthyridine-6,13-dione, 1) dyes carrying two derivatized phenyl rings have been synthesized as candidates for molecular electronics and especially for singlet fission, a process of interest for solar energy conversion. Solution measurements provided singlet and triplet excitation energies and fluorescence yields and lifetimes; conformational properties were analyzed computationally. The molecular properties are close to ideal for singlet fission. However, crystal structures, obtained by single-crystal X-ray diffraction (XRD), are rather similar to those of the polymorphs of solid 1, in which the formation of a charge-separated state followed by intersystem crossing, complemented with excimer formation, outcompetes singlet fission. Results of calculations by the approximate SIMPLE method suggest which ones among the solid derivatives are the best candidates for singlet fission, but it appears difficult to change the crystal packing in a desirable direction. We also describe the preparation of three specifically deuteriated versions of 1, expected to help sort out the mechanism of fast intersystem crossing in its charge-separated state.

Carrier Dynamics of Efficient Triplet Harvesting in AgBiS2 /Pentacene Singlet Fission Solar Cells

Singlet fission is a process by which an organic semiconductor is able to generate two triplet excitons from a single photon. If charges from the triplets can be successfully harvested without heavy losses in energy, then this process can enable a single-junction solar cell to surpass the Shockley-Queisser limit. While singlet fission processes are commonly observed in several materials, harvesting the resulting triplets is difficult and has been demonstrated with only a few transport materials. Here, transient absorption spectroscopy is used to investigate singlet fission and carrier transfer processes at the AgBiS₂ /pentacene (AgBiS₂ /Pc) heterojunction. The successful transfer of triplets from pentacene to AgBiS₂ and the transfer of holes from AgBiS₂ to pentacene is observed. Further singlet fission in pentacene by modifying the crystallinity of the pentacene layer and have fabricated the first singlet fission AgBiS₂ /Pc solar cell is enhanced. Singlet fission devices exhibit higher external quantum efficiency compared with the control devices, and thus demonstrating the significant contribution of charges from the singlet fission process.

The Role of Crystal Packing on the Optical Response of Trialkyltetrelethynyl Acenes

The electronic and optical responses of an organic semiconductor (OSC) are dictated by the chemistries of the molecular or polymer building blocks and how these chromophores pack in the solid state. Understanding the physicochemical natures of these responses are not only critical for determining OSC performance for a particular application, but the UV/visible optical response may also be of potential use to determine aspects of the molecular-scale solid-state packing for crystal polymorphs or thin-film morphologies that are difficult to determine otherwise. To probe these relationships, we report the quantum-chemical investigation of a series of trialkyltetrelethynyl acenes (tetrel = silicon or germanium) that adopt the brickwork (BW), slip-stack (SS), or herringbone (HB) packing configurations; the π-conjugated backbones considered here are pentacene (PEN) and anthradithiophene (ADT). For comparison, HB-packed (unsubstituted) pentacene is also included. Density functional theory (DFT) and G0W0 (single-shot GW) electronic band structures, G0W0-BSE (Bethe-Salpeter Equation)-derived optical spectra, polarized ϵ2 spectra, and distributions of both singlet and triplet exciton wave functions are reported. Configurational disorder is also considered. Further, we evaluate the probability of singlet fission in these materials through energy conservation relationships.

Singlet Fission Materials for Photovoltaics: from Small Molecules to Macromolecules

Singlet fission (SF) is a spin-allowed process in which a singlet state splits into two triplet states. Materials that enable SF have attracted great attention in the last decade, mainly stemming from the potential of overcoming the Shockley-Queisser (SQ) limit in photoenergy conversion. In the past decade, a large number of new molecules exhibiting SF have been explored and many devices based on SF materials have been studied, though the mechanistic understanding is still obscure. This review focuses on the recent developments of SF materials, including small molecules, oligomers and polymers. The molecular design strategies and related mechanisms of SF are discussed. Then the dynamics of charge transfer and energy transfer between SF materials and other materials are introduced. Further, we discuss the progresses of implementing SF in photovoltaics. It is hoped that a comprehensive understanding to the SF materials, devices and mechanism may pave a new way for the design of next generation photovoltaics. This article is protected by copyright. All rights reserved.

Quantifying Exciton Transport in Singlet Fission Diblock Copolymers

Singlet fission (SF) is a mechanism of exciton multiplication in organic chromophores, which has potential to drive highly efficient optoelectronic devices. Creating effective device architectures that operate by SF critically depends on electronic interactions across multiple length scales─from individual molecules to interchromophore interactions that facilitate multiexciton dephasing and exciton diffusion toward donor-acceptor interfaces. Therefore, it is imperative to understand the underpinnings of multiexciton transport and interfacial energy transfer in multichromophore systems. Interestingly, block copolymers (BCPs) can be designed to control multiscale interactions by tailoring the nature of the building blocks, yet SF dynamics are not well understood in these macromolecules. Here, we designed diblock copolymers comprising an inherent energy cleft at the interface between a block with pendent pentacene chromophores and an additional block with pendent tetracene chromophores. The singlet and triplet energy offset between the two blocks creates a driving force for exciton transport along the BCP chain in dilute solution. Using time-resolved optical spectroscopy, we have quantified the yields of key energy transfer steps, including both singlet and triplet energy transfer processes across the pentacene-tetracene interface. From this modular BCP architecture, we correlate the energy transfer time scales and relative yields with the length of each block. The ability to quantify these energy transfer processes provides valuable insights into exciton transport at critical length scales between bulk crystalline systems and small-molecule dimers─an area that has been underexplored.

Bio-inspired strategies for next-generation perovskite solar mobile power sources

Smart electronic devices are becoming ubiquitous due to many appealing attributes including portability, long operational time, rechargeability and compatibility with the user-desired form factor. Integration of mobile power sources (MPS) based on photovoltaic technologies with smart electronics will continue to drive improved sustainability and independence. With high efficiency, low cost, flexibility and lightweight features, halide perovskite photovoltaics have become promising candidates for MPS. Realization of these photovoltaic MPS (PV-MPS) with unconventionally extraordinary attributes requires new 'out-of-box' designs. Natural materials have provided promising designing solutions to engineer properties under a broad range of boundary conditions, ranging from molecules, proteins, cells, tissues, apparatus to systems in animals, plants, and humans optimized through billions of years of evolution. Applying bio-inspired strategies in PV-MPS could be biomolecular modification on crystallization at the atomic/meso-scale, bio-structural duplication at the device/system level and bio-mimicking at the functional level to render efficient charge delivery, energy transport/utilization, as well as stronger resistance against environmental stimuli (e.g., self-healing and self-cleaning). In this review, we discuss the bio-inspired/-mimetic structures, experimental models, and working principles, with the goal of revealing physics and bio-microstructures relevant for PV-MPS. Here the emphasis is on identifying the strategies and material designs towards improvement of the performance of emerging halide perovskite PVs and strategizing their bridge to future MPS.

Directing Energy Transfer in Halide Perovskite-Chromophore Hybrid Assemblies

Directing the flow of energy and the nature of the excited states that are produced in nanocrystal-chromophore hybrid assemblies is crucial for realizing their photocatalytic and optoelectronic applications. Using a combination of steady-state and time-resolved absorption and photoluminescence (PL) experiments, we have probed the excited-state interactions in the CsPbBr₃-Rhodamine B (RhB) hybrid assembly. PL studies reveal quenching of the CsPbBr₃ emission with a concomitant enhancement of the fluorescence of RhB, indicating a singlet-energy-transfer mechanism. Transient absorption spectroscopy shows that this energy transfer occurs on the ∼200 ps time scale. To understand whether the energy transfer occurs through a Förster or Dexter mechanism, we leveraged facile halide-exchange reactions to tune the optical properties of the donor CsPbBr₃ by alloying with chloride. This allowed us to tune the spectral overlap between the donor CsPb(Br_1-xCl_x)₃ emission and acceptor RhB absorption. For CsPbBr₃-RhB, the rate constant for energy transfer (k_ET) agrees well with Förster theory, whereas alloying with chloride to produce chloride-rich CsPb(Br_1-xCl_x)₃ favors a Dexter mechanism. These results highlight the importance of optimizing both the donor and acceptor properties to design light-harvesting assemblies that employ energy transfer. The ease of tuning optical properties through halide exchange of the nanocrystal donor provides a unique platform for studying and tailoring excited-state interactions in perovskite-chromophore assemblies.

Aspect ratio dependent air stability of PbSe nanorods and photovoltaic applications

Development of unique strategies to overcome Shockley–Queisser (SQ) limit in solar cells has gained a great deal of interest. Multiple exciton generation (MEG) process has been considered as one of the best approaches to the SQ limitation. In this respect, PbSe quantum dots (QDs) and nanorods (NRs) have been regarded as promising solar energy harvesting materials owing to their noticeable MEG yields. Although air stability has been regarded as one of the main disadvantage of PbSe QDs, no study has pointed out to the air sensitivity of PbSe NRs yet. Here, we reveal the effect of aspect ratio on air sensitivity and optical properties of PbSe NRs and discover that NRs with higher aspect ratios are more air stable, attributed to the reduced density of NR ends with air sensitive {100} facets. Furthermore, a band offset was created by utilization of tetrabutylammonium iodide and 1,2-ethanedithiol ligands in cell designs. We found that solar cells based on pristine PbSe NRs are limited by low open circuit voltages due to leakage current pathways. On the other hand, modified cells comprising light absorbing layers prepared by blending NRs and QDs and hole transporting QD layer exhibit a 10-fold improvement in solar cell efficiency.

QM-symex, update of the QM-sym database with excited state information for 173 kilo molecules

In the research field of material science, quantum chemistry database plays an indispensable role in determining the structure and properties of new material molecules and in deep learning in this field. A new quantum chemistry database, the QM-sym, has been set up in our previous work. The QM-sym is an open-access database focusing on transition states, energy, and orbital symmetry. In this work, we put forward the QM-symex with 173-kilo molecules. Each organic molecular in the QM-symex combines with the C_nh symmetry composite and contains the information of the first ten singlet and triplet transitions, including energy, wavelength, orbital symmetry, oscillator strength, and other quasi-molecular properties. QM-symex serves as a benchmark for quantum chemical machine learning models that can be effectively used to train new models of excited states in the quantum chemistry region as well as contribute to further development of the green energy revolution and materials discovery.

Measurement(s)	Excitation • molecular structure data • Chemical Properties
Technology Type(s)	quantum chemistry computational method
Factor Type(s)	molecule

Machine-accessible metadata file describing the reported data: 10.6084/m9.figshare.13089554

Bridge Resonance Effects in Singlet Fission

A major benefit of intramolecular singlet fission (iSF) materials, in which through-bond interactions mediate triplet pair formation, is the ability to control the triplet formation dynamics through molecular engineering. One common design strategy is the use of molecular bridges to mediate interchromophore interactions, decreasing electronic coupling by increasing chromophore-chromophore separation. Here, we report how the judicious choice of aromatic bridges can enhance chromophore-chromophore electronic coupling. This molecular engineering strategy takes advantage of "bridge resonance", in which the frontier orbital energies are nearly degenerate with those of the covalently linked singlet fission chromophores, resulting in fast iSF even at large interchromophore separations. Using transient absorption spectroscopy, we investigate this bridge resonance effect in a series of pentacene and tetracene-bridged dimers, and we find that the rate of triplet formation is enhanced as the bridge orbitals approach resonance. This work highlights the important role of molecular connectivity in controlling the rate of iSF through chemical bonds and establishes critical design principles for future use of iSF materials in optoelectronic devices.

The Photophysical Properties of Triisopropylsilyl-ethynylpentacene—A Molecule with an Unusually Large Singlet-Triplet Energy Gap—In Solution and Solid Phases

The process of singlet-exciton fission (SEF) has attracted much attention of late. One of the most popular SEF compounds is TIPS-pentacene (TIPS-P, where TIPS = triisopropylsilylethynyl) but, despite its extensive use as both a reference and building block, its photophysical properties are not so well established. In particular, the triplet state excitation energy remains uncertain. Here, we report quantitative data and spectral characterization for excited-singlet and -triplet states in dilute solution. The triplet energy is determined to be 7940 ± 1200 cm−1 on the basis of sensitization studies using time-resolved photoacoustic calorimetry. The triplet quantum yield at the limit of low concentration and low laser intensity is only ca. 1%. Self-quenching occurs at high solute concentration where the fluorescence yield and lifetime decrease markedly relative to dilute solution but we were unable to detect excimer emission by steady-state spectroscopy. Short-lived fluorescence, free from excimer emission or phosphorescence, occurs for crystals of TIPS-P, most likely from amorphous domains.

Suppressing triplet decay in quinoidal singlet fission materials: the role of molecular planarity and rigidity

Singlet fission, in which one singlet exciton is split into two triplet excitons, provides the potential to exceed the Shockley-Queisser limit for the power conversion efficiencies of organic solar cells. However, the charge transfer from the triplet state is found to be slow in singlet fission materials, so suppression of the triplet decay is crucial for effective utilization of singlet fission. Here, we first investigated triplet decay for the singlet fission molecular materials of ThBF and TThBF, which are characteristic of twisted and flexible quinoidal backbones. It is found that these compounds show rapid nonradiative decay in the Franck-Condon region and through the T₁/S₀ crossing point. Interestingly, upon locking the backbone twist by methylene, the LThBF and LTThBF compounds exhibit much higher energy barriers from T₁ to the T₁/S₀ crossing point, vanishing spin-orbit couplings, and decreased reorganization energies due to the planar and rigid structures. Consequently, both the triplet decay pathways are effectively suppressed. Our work reveals the importance of molecular planarity and rigidity in suppressing triplet decay and will be very helpful for full utilization of singlet fission in organic photovoltaics.

A method to detect triplet exciton transfer from singlet fission materials into silicon solar cells: Comparing different surface treatments

Singlet fission is one of the most promising routes to overcome the single-junction efficiency limit for solar cells. Singlet fission-enhanced silicon solar cells are the most desirable implementation, but transfer of triplet excitons, the product of singlet fission, into silicon solar cells has proved to be very challenging. Here, we report on an all optical measurement technique for the detection of triplet exciton quenching at semiconductor interfaces, a necessary requirement for triplet exciton or charge transfer. The method relies on the growth of individual, single-crystal islands of the singlet fission material on the silicon surface. The islands have different heights, and we correlate these heights to the quenching efficiency of triplet excitons. The quenching efficiency is measured by spatially resolved delayed fluorescence and compared to a diffusion-quenching model. Using silicon capped with a blocking thermal oxide and aromatic monolayers, we demonstrate that this technique can quickly screen different silicon surface treatments for triplet exciton quenching.

Conjugated Polymer Controlled Morphology and Charge Transport of Small-Molecule Organic Semiconductors

In this study, we report an effective approach to tune the crystallization, microstructure and charge transport of solution-processed organic semiconductors by blending with a conjugated polymer additive poly(3-hexylthiophene) (P3HT). When 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) was used as a model semiconductor material to mix with different amount of P3HT, their intermolecular interactions led to distinctive TIPS pentacene film morphologies, including randomly-oriented crystal ribbons, elongated needles with enhanced long-range order, and grass-like curved microwires with interlinkages. Each type of morphology was found to further correlate to considerably different charge transport and device performance. As compared to pristine TIPS pentacene devices, bottom-gate, top-contact OTFTs with 2% in weight P3HT additive showed a 2-fold and 5-fold improvement of average field-effect mobility and performance consistency (defined as the ratio of average mobility to the standard deviation), respectively. The improvement in transistor electrical performance can be attributed to the combined effect of enhanced crystal orientation and uniformity, as well as increased areal coverage. This work can be applied beyond the particular example demonstrated in this study and to tune the charge transport of other small-molecule organic semiconductors in general.

Impact of non-equilibrium molecular packings on singlet fission in microcrystals observed using 2D white-light microscopy

Singlet fission, the process of splitting a singlet exciton into two triplet excitons, has been proposed as a mechanism for improving the efficiency of future photovoltaic devices. In organic semiconductors exhibiting singlet fission, the geometric relationship between molecules plays an important role by setting the intermolecular couplings that determine the system energetics. Here, we spatially image TIPS-pentacene microcrystals using ultrafast two-dimensional white-light microscopy and discover a low-energy singlet state sparsely distributed throughout the microcrystals, with higher concentrations at edges and morphological defects. The spectra of these singlet states are consistent with slip-stacked molecular geometries and increased charge-transfer couplings. The picosecond-timescale kinetics of these low-energy singlet states matches that of the correlated triplet-pair state, which we attribute to singlet/triplet-pair interconversion at these sites. Our observations support the conclusion that small populations of geometries with favourable energetics can play outsized roles in singlet fission processes.

Effect of Charge-Transfer State Energy on Charge Generation Efficiency via Singlet Fission in Pentacene-Fullerene Solar Cells

Singlet fission in pentacene creates two triplet excitons per absorbed photon. In a solar cell, each triplet can generate an electron-hole pair, and hence, external quantum efficiencies exceeding 100% have been reported for pentacene-fullerene solar cells. The energetics of this process are intriguing because the minimum photon energy loss, defined as the energy difference between the (triplet) exciton state and the open-circuit voltage, is less than 0.5 eV and distinctively smaller than that in most organic donor-acceptor solar cells. To investigate the energetics of this process, we analyze the effect of the energy of the lowest unoccupied molecular orbital (LUMO) for different fullerene derivatives. With the LUMO energy becoming less negative, the open-circuit voltage increases and charge generation decreases. For all but one of the fullerenes tested, the charge-transfer state energy is distinctively higher than the pentacene triplet energy, revealing that charge generation via singlet fission is actually endergonic. An elementary Marcus model for the rate of electron transfer provides a qualitative description of the experimental trends, in accordance with an endergonic charge transfer. Considering that charge generation from triplet states is endergonic, involvement of pentacene singlet states, either from direct photoexcitation or via triplet-triplet annihilation, cannot be excluded.

Davydov splitting and singlet fission in excitonically coupled pentacene dimers

Singlet fission (SF) allows two charges to be generated from the absorption of a single photon and is, therefore, potentially transformative toward improving solar energy conversion. Key to the present study of SF is the design of pentacene dimers featuring a xanthene linker that strictly places two pentacene chromophores in a rigid arrangement and, in turn, enforces efficient, intramolecular π-overlap that mimics interactions typically found in condensed state (e.g., solids, films, etc.). Inter-chromophore communication ensures Davydov splitting, which plays an unprecedented role toward achieving SF in pentacene dimers. Transient absorption measurements document that intramolecular SF evolves upon excitation into the lower Davydov bands to form a correlated triplet pair at cryogenic temperature. At room temperature, the two spin-correlated triplets, one per pentacene moiety within the dimers, are electronically coupled to an excimer state. The presented results are transferable to a broad range of acene morphologies including aggregates, crystals, and films.

Improved model on fluorescence decay in singlet fission materials

Singlet fission (SF) materials are a kind of promising material for breaking the solar cell efficiency limit. Here we rebuild the four-electron spin Hamiltonian under our coordinate system and present an improved model described by the population evolution equations on fluorescence decay (FD) dynamics that contain several detailed physical processes. The improved model for total random molecular orientation gives a more consistent fitting on the experimental data [G. B. Piland et al., J. Phys. Chem. C, 2013, 117, 1224] about time-resolved FD of amorphous rubrene thin films in the presence of a strong magnetic field. The fitting can reflect the relative rates of the real physical processes. Further on, our results show two kinds of magnetic field effect for the variety of two molecular relative orientations with respect to each other and the magnetic field by investigating the singlet projection and FD dynamics of the system.

Intramolecular Singlet Fission: Insights from Quantum Dynamical Simulations

We investigate the dynamics of intramolecular singlet fission in a dimer consisting of two pentacene-based chromophores covalently bonded to a phenylene spacer using an approach that combines high-level ab initio multireference perturbation theory methods and quantum dynamical simulations. The results show that the population of the multiexcitonic state, corresponding to the first step of singlet fission, is facilitated by the existence of higher-lying doubly excited and charge transfer states that participate in a superexchange-like way. The important role played by high-frequency ring-breathing molecular vibrations in the process is also discussed.

Surface States Mediate Triplet Energy Transfer in Nanocrystal-Acene Composite Systems

Hybrid organic:inorganic materials composed of semiconductor nanocrystals functionalized with acene ligands have recently emerged as a promising platform for photon upconversion. Infrared light absorbed by a nanocrystal excites charge carriers that can pass to surface-bound acenes, forming triplet excitons capable of fusing to produce visible radiation. To fully realize this scheme, energy transfer between nanocrystals and acenes must occur with high efficiency, yet the mechanism of this process remains poorly understood. To improve our knowledge of the fundamental steps involved in nanoparticle:acene energy transfer, we used ultrafast transient absorption to investigate excited electronic dynamics of PbS nanocrystals chemically functionalized with 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) ligands. We find photoexcitation of PbS does not lead to direct triplet energy transfer to surface-bound TIPS-pentacene molecules but rather to the formation of an intermediate state within 40 ps. This intermediate persists for ∼100 ns before evolving to produce TIPS-pentacene triplet excitons. Analysis of transient absorption lineshapes suggests this intermediate corresponds to charge carriers localized at the PbS nanocrystal surface. This hypothesis is supported by constrained DFT calculations that find a large number of spin-triplet states at PbS NC surfaces. Though some of these states can facilitate triplet transfer, others serve as traps that hinder it. Our results highlight that nanocrystal surfaces play an active role in mediating energy transfer to bound acene ligands and must be considered when optimizing composite NC-based materials for photon upconversion, photocatalysis, and other optoelectronic applications.

Vibronic exciton theory of singlet fission. I. Linear absorption and the anatomy of the correlated triplet pair state

Recent time-resolved spectroscopic experiments have indicated that vibronic coupling plays a vital role in facilitating the process of singlet fission. In this work, which forms the first article of a series, we set out to unravel the mechanisms underlying singlet fission through a vibronic exciton theory. We formulate a model in which both electronic and vibrational degrees of freedom are treated microscopically and non-perturbatively. Using pentacene as a prototypical material for singlet fission, we subject our theory to comparison with measurements on polarization-resolved absorption of single crystals, and employ our model to characterize the excited states underlying the absorption band. Special attention is given to the convergence of photophysical observables with respect to the basis size employed, through which we determine the optimal basis for more expensive calculations to be presented in subsequent work. We furthermore evaluate the energetic separation between the optically prepared singlet excited state and the correlated triplet pair state, as well as provide a real-space characterization of the latter, both of which are of key importance in the discussion of fission dynamics. We discuss our results in the context of recent experimental studies.

Theoretical Modeling of Singlet Fission

Singlet fission is a photophysical reaction in which a singlet excited electronic state splits into two spin-triplet states. Singlet fission was discovered more than 50 years ago, but the interest in this process has gained a lot of momentum in the past decade due to its potential as a way to boost solar cell efficiencies. This review presents and discusses the most recent advances with respect to the theoretical and computational studies on the singlet fission phenomenon. The work revisits important aspects regarding electronic states involved in the process, the evaluation of fission rates and interstate couplings, the study of the excited state dynamics in singlet fission, and the advances in the design and characterization of singlet fission compounds and materials such as molecular dimers, polymers, or extended structures. Finally, the review tries to pinpoint some aspects that need further improvement and proposes future lines of research for theoretical and computational chemists and physicists in order to further push the understanding and applicability of singlet fission.

Harnessing Molecular Vibrations to Probe Triplet Dynamics During Singlet Fission

Ultrafast vibrational spectroscopy in the mid-infrared spectral range provides the opportunity to probe the dynamics of electronic states involved in all stages of the singlet fission reaction through their unique vibrational frequencies. This capability is demonstrated using a model singlet fission chromophore, 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-Pn). The alkyne groups of the TIPS side chains are coupled to the conjugated framework of the pentacene cores, enabling direct examination of the dynamics of triplet excitons that have successfully separated from correlated triplet pair states in crystalline films of TIPS-Pn. Relaxation processes during the separation of triplet excitons and triplet-triplet annihilation after their separation result in the formation of hot ground state molecules that also exhibit unique vibrational frequencies. Because all organic molecules possess native vibrational modes, ultrafast vibrational spectroscopy offers a new approach to examine the dynamics of electronic intermediates that may inform ongoing efforts to utilize singlet fission to overcome thermalization losses in photovoltaic applications.

Triplet Harvesting from Intramolecular Singlet Fission in Polytetracene

Singlet fission (SF), a promising mechanism of multiple exciton generation, has only recently been engineered as a fast, efficient, intramolecular process (iSF). The challenge now lies in designing and optimizing iSF materials that can be practically applied in high-performance optoelectronic devices. However, most of the reported iSF systems, such as those based on donor-acceptor polymers or pentacene, have low triplet energies, which limits their applications. Tetracene-based materials can overcome significant challenges, as the tetracene triplet state is practically useful, ≈1.2 eV. Here, the synthesis and excited state dynamics of a conjugated tetracene homopolymer are studied. This polymer undergoes ultrafast iSF in solution, generating high-energy triplets on a sub-picosecond time scale. Magnetic-field-dependent photocurrent measurements of polytetracene-based devices demonstrate the first example of iSF-generated triplet extraction in devices, exhibiting the potential of iSF materials for use in next-generation devices.

Singlet Fission: Progress and Prospects in Solar Cells

The third generation of photovoltaic technology aims to reduce the fabrication cost and improve the power conversion efficiency (PCE) of solar cells. Singlet fission (SF), an efficient multiple exciton generation (MEG) process in organic semiconductors, is one promising way to surpass the Shockley-Queisser limit of conventional single-junction solar cells. Traditionally, this MEG process has been observed as an intermolecular process in organic materials. The implementation of intermolecular SF in photovoltaic devices has achieved an external quantum efficiency of over 100% and demonstrated significant promise for boosting the PCE of third generation solar cells. More recently, efficient intramolecular SF has been reported. Intramolecular SF materials are modular and have the potential to overcome certain design constraints that intermolecular SF materials possess, which may allow for more facile integration into devices.

Efficient Triplet Exciton Fusion in Molecularly Doped Polymer Light-Emitting Diodes

Solution-processed polymer organic light-emitting diodes (OLEDs) doped with triplet-triplet annihilation (TTA)-upconversion molecules, including 9,10-diphenylanthracene, perylene, rubrene and TIPS-pentacene, are reported. The fraction of triplet-generated electroluminescence approaches the theoretical limit. Record-high efficiencies in solution-processed OLEDs based on these materials are achieved. Unprecedented solid-state TTA-upconversion quantum yield of 23% (TTA-upconversion reaction efficiency of 70%) at electrical excitation well below one-sun equivalent is observed.

Electron Transfer from Triplet State of TIPS-Pentacene Generated by Singlet Fission Processes to CH3NH3PbI3 Perovskite

To reveal the applicability of singlet fission processes in perovskite solar cell, we investigated electron transfer from TIPS-pentacene to CH₃NH₃PbI₃ (MAPbI₃) perovskite in film phase. Through the observation of the shorter fluorescence lifetime in TIPS-pentacene/MAPbI₃ perovskite bilayer film (5 ns) compared with pristine MAPbI₃ perovskite film (20 ns), we verified electron-transfer processes between TIPS-pentacene and MAPbI₃ perovskite. Furthermore, the observation of singlet fission processes, a faster decay rate, TIPS-pentacene cations, and the analysis of kinetic profiles of the intensity ratio between 500 and 525 nm in the TA spectra of the TIPS-pentacene/MAPbI₃ perovskite bilayer film indicate that electron transfer occurs from triplet state of TIPS-pentacene generated by singlet fission processes to MAPbI₃ perovskite conduction band. We believe that our results can provide useful information on the design of solar cells sensitized by singlet fission processes and pave the way for new types of perovskite solar cells.

Simulating charge transport in organic semiconductors and devices: a review

Charge transport simulation can be a valuable tool to better understand, optimise and design organic transistors (OTFTs), photovoltaics (OPVs), and light-emitting diodes (OLEDs). This review presents an overview of common charge transport and device models; namely drift-diffusion, master equation, mesoscale kinetic Monte Carlo and quantum chemical Monte Carlo, and a discussion of the relative merits of each. This is followed by a review of the application of these models as applied to charge transport in organic semiconductors and devices, highlighting in particular the insights made possible by modelling. The review concludes with an outlook for charge transport modelling in organic electronics.

Diverse dissolution–recrystallization structural transformations and sequential Förster resonance energy transfer behavior of a luminescent porous Cd-MOF

The fluorescent porous MOFs can be host materials to explore vectorial Förster resonance energy transfer between MOFs and organic dyes.