Unveiling nanometer scale extinction and scattering phenomena through combined electron energy loss spectroscopy and cathodoluminescence measurements

Generation of entangled waveguided photon pairs by free electrons

Entangled photons are a key resource in quantum technologies. While intense laser light propagating in nonlinear crystals is conventionally used to generate entangled photons, such schemes have low efficiency due to the weak nonlinear response of known materials and losses associated with in/out photon coupling. Here, we show how to generate entangled polariton pairs directly within optical waveguides using free electrons. The measured energy loss of undeflected electrons heralds the production of counter-propagating polariton pairs entangled in energy and emission direction. For illustration, we study the excitation of plasmon polaritons in metal strip waveguides that strongly enhance light-matter interactions, rendering two-plasmon generation dominant over single-plasmon excitation. We demonstrate that electron energy losses detected within optimal frequency ranges can reliably signal the generation of plasmon pairs entangled in energy and momentum. Our proposed scheme is directly applicable to other types of optical waveguides for in situ generation of entangled photon pairs.

Observation of Sub-10 nm Transition Metal Dichalcogenide Nanocrystals in Rapidly Heated van der Waals Heterostructures

Two-dimensional materials, such as transition metal dichalcogenides (TMDCs), have the potential to revolutionize the field of electronics and photonics due to their unique physical and structural properties. This research presents a novel method for synthesizing crystalline TMDCs crystals with <10 nm size using ultrafast migration of vacancies at elevated temperatures. Through in situ and ex situ processing and using atomic-level characterization techniques, we analyzed the shape, size, crystallinity, composition, and strain distribution of these nanocrystals. These nanocrystals exhibit electronic structure signatures that differ from the 2D bulk: i.e., uniform mono- and multilayers. Further, our in situ, vacuum-based synthesis technique allows observation and comparison of defect and phase evolution in these crystals formed under van der Waals heterostructure confinement versus unconfined conditions. Overall, this research demonstrates a solid-state route to synthesizing uniform nanocrystals of TMDCs and lays the foundation for materials science in confined 2D spaces under extreme conditions.

Electron Beam Induced Circularly Polarized Light Emission of Chiral Gold Nanohelices

Chiral plasmonic nanostructures possess a chiroptical response orders of magnitude stronger than that of natural biomolecular systems, making them highly promising for a wide range of biochemical, medical, and physical applications. Despite extensive efforts to artificially create and tune the chiroptical properties of chiral nanostructures through compositional and geometrical modifications, a fundamental understanding of their underlying mechanisms remains limited. In this study, we present a comprehensive investigation of individual gold nanohelices by using advanced analytical electron microscopy techniques. Our results, as determined by angle-resolved cathodoluminescence polarimetry measurements, reveal a strong correlation between the circular polarization state of the emitted far-field radiation and the handedness of the chiral nanostructure in terms of both its dominant circularity and directional intensity distribution. Further analyses, including electron energy-loss measurements and numerical simulations, demonstrate that this correlation is driven by longitudinal plasmonic modes that oscillate along the helical windings, much like straight nanorods of equal strength and length. However, due to the three-dimensional shape of the structures, these longitudinal modes induce dipolar transverse modes with charge oscillations along the short axis of the helices for certain resonance energies. Their radiative decay leads to observed emission in the visible range. Our findings provide insight into the radiative properties and underlying mechanisms of chiral plasmonic nanostructures and enable their future development and application in a wide range of fields, such as nano-optics, metamaterials, molecular physics, biochemistry, and, most promising, chiral sensing via plasmonically enhanced chiral optical spectroscopy techniques.

Cathodoluminescence Nanoscopy: State of the Art and Beyond

Cathodoluminescence (CL) nanoscopy is proven to be a powerful tool to explore nanoscale optical properties, whereby free electron beams achieve a spatial resolution far beyond the diffraction limit of light. With developed methods for the control of electron beams and the collection of light, the dimension of information that CL can access has been expanded to include polarization, momentum, and time, holding promise to provide invaluable insights into the study of materials and optical near-field dynamics. With a focus on the burgeoning field of CL nanoscopy, this perspective outlines the recent advancements and applications of this technique, as illustrated by the salient experimental works. In addition, as an outlook for future research, several appealing directions that may bring about developments and discoveries are highlighted.

Depletion force optimization for high-purity gold nanotriangles prepared using different growth methods

A homogeneous structural distribution in metal nanoparticle is commonly required for their application, and despite high-yield growth techniques, unavoidable structural heterogeneity remains a concern in metal nanoparticle synthesis. Gold nanotriangles (AuNTs) were synthesized using seed-mediated and seedless growth methods. Recent advancements in high-yield synthesis processes have enabled easy handling of AuNTs, which exhibit unique localized surface plasmon resonance characteristics due to their anisotropic triangular form. The flocculation and subsequent precipitation technique was used to purify AuNTs of different sizes synthesized using seed-mediated and seedless growth methods. The optimal conditions for obtaining high-purity AuNTs were explored by introducing a high concentration of cetyltrimethylammonium chloride. Additionally, the depletion force necessary for achieving high-purity AuNTs was calculated to reveal variations in the required depletion forces for AuNTs synthesized using different growth techniques. The alternations in the size distribution of AuNTs during the flocculation step were tracked using dynamic light scattering, and the surface charge of AuNTs synthesized through different growth methods was evaluated by ζ-potential. The high purity of the AuNTs produced using the seedless growth method required a larger depletion force than the seed-mediated grown AuNTs. The difference in the required depletion forces results from the difference in the electrostatic forces caused by the different growth methods.

Modulation of Cathodoluminescence by Surface Plasmons in Silver Nanowires

The waveguide modes in chemically-grown silver nanowires on silicon nitride substrates are observed using spectrally- and spatially-resolved cathodoluminescence (CL) excited by high-energy electrons in a scanning electron microscope. The presence of a long-range, travelling surface plasmon mode modulates the coupling efficiency of the incident electron energy into the nanowires, which is observed as oscillations in the measured CL with the point of excitation by the focused electron beam. The experimental data are modeled using the theory of surface plasmon polariton modes in cylindrical metal waveguides, enabling the complex mode wavenumbers and excitation strength of the long-range surface plasmon mode to be extracted. The experiments yield insight into the energy transfer mechanisms between fast electrons and coherent oscillations in surface charge density in metal nanowires and the relative amplitudes of the radiative processes excited in the wire by the electron.

μeV electron spectromicroscopy using free-space light

The synergy between free electrons and light has recently been leveraged to reach an impressive degree of simultaneous spatial and spectral resolution, enabling applications in microscopy and quantum optics. However, the required combination of electron optics and light injection into the spectrally narrow modes of arbitrary specimens remains a challenge. Here, we demonstrate microelectronvolt spectral resolution with a sub-nanometer probe of photonic modes with quality factors as high as 10⁴. We rely on mode matching of a tightly focused laser beam to whispering gallery modes to achieve a 10⁸-fold increase in light-electron coupling efficiency. By adapting the shape and size of free-space optical beams to address specific physical questions, our approach allows us to interrogate any type of photonic structure with unprecedented spectral and spatial detail.

Focused light introduction into transmission electron microscope via parabolic mirror

We developed a novel light optics system installed in a scanning transmission electron microscope (STEM) to introduce a focused light accurately adjusted at the electron beam irradiation position using a parabolic mirror. With a parabolic mirror covering both the upper and lower sides of the sample, the position and focus of the light beam can be evaluated by imaging the angular distribution of the transmitted light. By comparing the light image and the electron micrograph, the irradiation positions of the electron beam and the laser beam can be accurately adjusted to each other. The size of the focused light was confirmed to be within a few microns from the light Ronchigram, which is consistent with the simulated light spot size. The spot size and position alignment were further confirmed by laser-ablating only a targeted polystyrene particle without damaging the surrounding particles. When using a halogen lamp as the light source, this system allows investigating optical spectra in comparison with cathodoluminescence (CL) spectra at exactly the same location.

Interrogating Quantum Nonlocal Effects in Nanoplasmonics through Electron-Beam Spectroscopy

A rigorous account of quantum nonlocal effects is paramount for understanding the optical response of metal nanostructures and for designing plasmonic devices at the nanoscale. Here, we present a scheme for retrieving the quantum surface response of metals, encapsulated in the Feibelman d-parameters, from electron energy-loss spectroscopy (EELS) and cathodoluminescence (CL) measurements. We theoretically demonstrate that quantum nonlocal effects have a dramatic impact on EELS and CL spectra, in the guise of spectral shifts and nonlocal damping, when either the system size or the inverse wave vector in extended structures approaches the nanometer scale. Our concept capitalizes on the unparalleled ability of free electrons to supply deeply subwavelength near-fields and, thus, probe the optical response of metals at length scales in which quantum-mechanical effects are apparent. These results pave the way for a widespread use of the d-parameter formalism, thereby facilitating a rigorous yet practical inclusion of nonclassical effects in nanoplasmonics.

Plate-Like Colloidal Metal Nanoparticles

The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials.

A Review on Gold Nanotriangles: Synthesis, Self-Assembly and Their Applications

Gold nanoparticles (AuNPs) with interesting optical properties have attracted much attention in recent years. The synthesis and plasmonic properties of AuNPs with a controllable size and shape have been extensively investigated. Among these AuNPs, gold nanotriangles (AuNTs) exhibited unique optical and plasmonic properties due to their special triangular anisotropy. Indeed, AuNTs showed promising applications in optoelectronics, optical sensing, imaging and other fields. However, only few reviews about these applications have been reported. Herein, we comprehensively reviewed the synthesis and self-assembly of AuNTs and their applications in recent years. The preparation protocols of AuNTs are mainly categorized into chemical synthesis, biosynthesis and physical-stimulus-induced synthesis. The comparison between the advantages and disadvantages of various synthetic strategies are discussed. Furthermore, the specific surface modification of AuNTs and their self-assembly into different dimensional nano- or microstructures by various interparticle interactions are introduced. Based on the unique physical properties of AuNTs and their assemblies, the applications towards chemical biology and sensing were developed. Finally, the future development of AuNTs is prospected.

Large-Area Periodic Arrays of Atomically Flat Single-Crystal Gold Nanotriangles Formed Directly on Substrate Surfaces

The advancement of nanoenabled wafer-based devices requires the establishment of core competencies related to the deterministic positioning of nanometric building blocks over large areas. Within this realm, plasmonic single-crystal gold nanotriangles represent one of the most attractive nanoscale components but where the formation of addressable arrays at scale has heretofore proven impracticable. Herein, a benchtop process is presented for the formation of large-area periodic arrays of gold nanotriangles. The devised growth pathway sees the formation of an array of defect-laden seeds using lithographic and vapor-phase assembly processes followed by their placement in a growth solution promoting planar growth and threefold symmetric side-faceting. The nanotriangles formed in this high-yield synthesis distinguish themselves in that they are epitaxially aligned with the underlying substrate, grown to thicknesses that are not readily obtainable in colloidal syntheses, and present atomically flat pristine surfaces exhibiting gold atoms with a close-packed structure. As such, they express crisp and unambiguous plasmonic modes and form photoactive surfaces with highly tunable and readily modeled plasmon resonances. The devised methods, hence, advance the integration of single-crystal gold nanotriangles into device platforms and provide an overall fabrication strategy that is adaptable to other nanomaterials.

Phase separation enabled silver nano-array

The surface-supported silver nanoparticles have been studied and applied in various applications. Many unique nanostructures have been introduced into this field to improve the functionalities of the surfaces depending on application purposes. We created featured silver nano-array surfaces by utilizing the solvent-mediated phase transition on the surface grafted with poly (acrylic) acids polymer chains and taking advantage of the low temperature of argon gas discharged plasma as a reducing agent. The applied solvents and grafted polymer chain densities affected the phase transition and thus determined the outcome of surface nano-array patterns. However, the total loaded silver ions on the surface affected silver nano-array structures at the sub-micron levels. The featured silver patterned surfaces made in the optimal conditions present a favorable surface-enhanced Raman spectroscopy enhancement as well as recyclability for detection re-usage. This novel method prepares tunable silver nanopatterned surfaces and provides a new approach to various potential applications.

Solid-state synthesis of UV-plasmonic Cr2N nanoparticles

Materials that exhibit plasmonic response in the UV region can be advantageous for many applications, such as biological photodegradation, photocatalysis, disinfection, and bioimaging. Transition metal nitrides have recently emerged as chemically and thermally stable alternatives to metal-based plasmonic materials. However, most free-standing nitride nanostructures explored so far have plasmonic responses in the visible and near-IR regions. Herein, we report the synthesis of UV-plasmonic Cr₂N nanoparticles using a solid-state nitridation reaction. The nanoparticles had an average diameter of 9 ± 5 nm and a positively charged surface that yields stable colloidal suspension. The particles were composed of a crystalline nitride core and an amorphous oxide/oxynitride shell whose thickness varied between 1 and 7 nm. Calculations performed using the finite element method predicted the localized surface plasmon resonance (LSPR) for these nanoparticles to be in the UV-C region (100-280 nm). While a distinctive LSPR peak could not be observed using absorbance measurements, low-loss electron energy loss spectroscopy showed the presence of surface plasmons between 80 and 250 nm (or ∼5 to 15 eV) and bulk plasmons centered around 50-62 nm (or ∼20 to 25 eV). Plasmonic coupling was also observed between the nanoparticles, resulting in resonances between 250 and 400 nm (or ∼2.5 to 5 eV).

Cathodoluminescence excitation spectroscopy: Nanoscale imaging of excitation pathways

Following optical excitations' life span from creation to decay into photons is crucial in understanding materials photophysics. Macroscopically, this is studied using optical techniques, such as photoluminescence excitation spectroscopy. However, excitation and emission pathways can vary at nanometer scales, preventing direct access, as no characterization technique has the relevant spatial, spectral, and time resolution. Here, using combined electron spectroscopies, we explore excitations' creation and decay in two representative optical materials: plasmonic nanoparticles and luminescent two-dimensional layers. The analysis of the energy lost by an exciting electron that is coincident in time with a visible-ultraviolet photon unveils the decay pathways from excitation toward light emission. This is demonstrated for phase-locked (coherent) interactions (localized surface plasmons) and non-phase-locked ones (point defect excited states). The developed cathodoluminescence excitation spectroscopy images energy transfer pathways at the nanometer scale, widening the available toolset to explore nanoscale materials.

Multimode Electron Tomography Sheds Light on Synthesis, Structure, and Properties of Complex Metal-Based Nanoparticles

Electron tomography has become a cornerstone technique for the visualization of nanoparticle morphology in three dimensions. However, to obtain in-depth information about a nanoparticle beyond surface faceting and morphology, different electron microscopy signals must be combined. The most notable examples of these combined signals include annular dark-field scanning transmission electron microscopy (ADF-STEM) with different collection angles and the combination of ADF-STEM with energy-dispersive X-ray or electron energy loss spectroscopies. Here, the experimental and computational development of various multimode tomography techniques in connection to the fundamental materials science challenges that multimode tomography has been instrumental to overcoming are summarized. Although the techniques can be applied to a wide variety of compositions, the study is restricted to metal and metal oxide nanoparticles for the sake of simplicity. Current challenges and future directions of multimode tomography are additionally discussed.

Plasmonic Cavities and Individual Quantum Emitters in the Strong Coupling Limit

The interaction of emitters with plasmonic cavities (PCs) has been studied extensively during the past decade. Much of the experimental work has focused on the weak coupling regime, manifested most importantly by the celebrated Purcell effect, which involves a modulation of the spontaneous emission rate of the emitter due to interaction with the local electromagnetic density of states. Recently, there has been a growing interest in studying hybrid emitter-PC systems in the strong-coupling (SC) regime, in which the excited state of an emitter hybridizes with that of the PC to generate new states termed polaritons. This phenomenon is termed vacuum Rabi splitting (VRS) and is manifested in the spectrum through splitting into two bands.

In this Account, we discuss SC with PCs and focus particularly on work from our lab on the SC of quantum dots (QDs) and plasmonic silver bowtie cavities. As bowtie structures demonstrate strong electric field enhancement in their gaps, they facilitate approaching the SC regime and even reaching it with just one to a few emitters placed there. QDs are particularly advantageous for such studies, due to their significant brightness and long lifetime under illumination. VRS was observed in our lab by optical dark-field microspectroscopy even in the limit of individual QDs. We further used electron energy loss spectroscopy, a near-field spectroscopic technique, to facilitate measuring SC not only in bright modes but also in subradiant, dark plasmonic modes. Dark modes are expected to live longer than bright modes and therefore should be able to store electromagnetic energy for longer times.

Photoluminescence (PL) is another useful observable for probing the SC regime at the single-emitter limit, as shown by several laboratories. We recently used Hanbury Brown and Twiss interferometry to demonstrate the quantum nature of PL from QDs within PCs, verifying that the measurements are indeed from one to three QDs. Further spectroscopic studies of QD-PC systems in fact manifested several surprising features, indicating discrepancies between scattering and PL spectra. These observations pointed to the contribution of multiple excited states. Indeed, using model simulations based on an extended Jaynes–Cummings Hamiltonian, it was found that the involvement of a dark state of the QDs can explain the experimental findings. Given that bright and dark states couple to the cavity with different degrees of coupling strength, the PC affects in a different manner each excitonic state. This yields complex relaxation pathways and interesting dynamics.

Future work should allow us to increase the QD-PC coupling deeper into the SC regime. This will pave the way to exciting applications including the generation of single-photon sources and studies of cavity-induced coherent interactions between emitters.

Surface Plasmon Tunability of Core-Shell Au@Mo6 Nanoparticles by Shell Thickness Modification

Plasmon resonances of noble metal nanoparticles are used to enhance light-matter interactions in the nanoworld. The nanoparticles' optical response depends strongly on the dielectric permittivity of the surrounding medium. We show that the plasmon resonance energy of core-shell Au@Mo₆ nanoparticles can be tuned from 2.4 to 1.6 eV by varying the thickness of their Mo₆ cluster shells between zero and 70 nm, when the core diameter is fixed at 100 nm. We probe their plasmonic response by performing nanometer-resolution plasmon mapping on individual nanoparticles, using electron energy-loss spectroscopy inside a transmission electron microscope. Our experimental results are corroborated by numerical simulations performed using boundary element methods. The simulations predict a similar dependency for the extinction energy, showing that this effect could also be observed by light-optical experiments outside the electron microscope, although limited by the size distribution of the nanoparticles in solution and the substantial scattering effects.

Aluminum Cayley trees as scalable, broadband, multiresonant optical antennas

Optical antennas perform the same functions for light that aerials do for radio waves; they can extract energy from a propagating electromagnetic field, and they can convert localized energy into propagating radiation. Here, we use a fractal-like design, the Cayley tree, to create optical antennas. Implementing this simple iterative design with aluminum as the antenna material, we demonstrate optical antennas with broadband operating range from energies corresponding to thermal radiation up to ultraviolet. The spatial distribution of electromagnetic energy inside the antennas is experimentally imaged using electron energy loss spectroscopy, a technique allowing direct imaging and spectroscopy at the nanoscale. Such antennas are interesting for applications including photodetection, nonlinear frequency conversion, and infrared absorption spectroscopy.

An optical antenna can convert a propagative optical radiation into a localized excitation and the reciprocal. Although optical antennas can be readily created using resonant nanoparticles (metallic or dielectric) as elementary building blocks, the realization of antennas sustaining multiple resonances over a broad range of frequencies remains a challenging task. Here, we use aluminum self-similar, fractal-like structures as broadband optical antennas. Using electron energy loss spectroscopy, we experimentally evidence that a single aluminum Cayley tree, a simple self-similar structure, sustains multiple plasmonic resonances. The spectral position of these resonances is scalable over a broad spectral range spanning two decades, from ultraviolet to midinfrared. Such multiresonant structures are highly desirable for applications ranging from nonlinear optics to light harvesting and photodetection, as well as surface-enhanced infrared absorption spectroscopy.

Unveiling the Coupling of Single Metallic Nanoparticles to Whispering-Gallery Microcavities

Whispering-gallery mode resonators host multiple trapped narrow-band circulating optical resonances that find applications in quantum electrodynamics, optomechanics, and sensing. However, the spherical symmetry and low field leakage of dielectric microspheres make it difficult to probe their high-quality optical modes using far-field radiation. Even so, local field enhancement from metallic nanoparticles (MNPs) coupled to the resonators can interface the optical far field and the bounded cavity modes. In this work, we study the interaction between whispering-gallery modes and MNP surface plasmons with nanometric spatial resolution by using electron-beam spectroscopy with a scanning transmission electron microscope. We show that gallery modes are induced over a selective spectral range of the nanoparticle plasmons, and additionally, their polarization can be controlled by the induced dipole moment of the MNP. Our study demonstrates a viable mechanism to effectively excite high-quality-factor whispering-gallery modes and holds potential for applications in optical sensing and light manipulation.

Optical Excitations with Electron Beams: Challenges and Opportunities

Free electron beams such as those employed in electron microscopes have evolved into powerful tools to investigate photonic nanostructures with an unrivaled combination of spatial and spectral precision through the analysis of electron energy losses and cathodoluminescence light emission. In combination with ultrafast optics, the emerging field of ultrafast electron microscopy utilizes synchronized femtosecond electron and light pulses that are aimed at the sampled structures, holding the promise to bring simultaneous sub-Å-sub-fs-sub-meV space-time-energy resolution to the study of material and optical-field dynamics. In addition, these advances enable the manipulation of the wave function of individual free electrons in unprecedented ways, opening sound prospects to probe and control quantum excitations at the nanoscale. Here, we provide an overview of photonics research based on free electrons, supplemented by original theoretical insights and discussion of several stimulating challenges and opportunities. In particular, we show that the excitation probability by a single electron is independent of its wave function, apart from a classical average over the transverse beam density profile, whereas the probability for two or more modulated electrons depends on their relative spatial arrangement, thus reflecting the quantum nature of their interactions. We derive first-principles analytical expressions that embody these results and have general validity for arbitrarily shaped electrons and any type of electron-sample interaction. We conclude with some perspectives on various exciting directions that include disruptive approaches to noninvasive spectroscopy and microscopy, the possibility of sampling the nonlinear optical response at the nanoscale, the manipulation of the density matrices associated with free electrons and optical sample modes, and appealing applications in optical modulation of electron beams, all of which could potentially revolutionize the use of free electrons in photonics.

Spontaneous and stimulated electron-photon interactions in nanoscale plasmonic near fields

The interplay between free electrons, light, and matter offers unique prospects for space, time, and energy resolved optical material characterization, structured light generation, and quantum information processing. Here, we study the nanoscale features of spontaneous and stimulated electron-photon interactions mediated by localized surface plasmon resonances at the tips of a gold nanostar using electron energy-loss spectroscopy (EELS), cathodoluminescence spectroscopy (CL), and photon-induced near-field electron microscopy (PINEM). Supported by numerical electromagnetic boundary-element method (BEM) calculations, we show that the different coupling mechanisms probed by EELS, CL, and PINEM feature the same spatial dependence on the electric field distribution of the tip modes. However, the electron-photon interaction strength is found to vary with the incident electron velocity, as determined by the spatial Fourier transform of the electric near-field component parallel to the electron trajectory. For the tightly confined plasmonic tip resonances, our calculations suggest an optimum coupling velocity at electron energies as low as a few keV. Our results are discussed in the context of more complex geometries supporting multiple modes with spatial and spectral overlap. We provide fundamental insights into spontaneous and stimulated electron-light-matter interactions with key implications for research on (quantum) coherent optical phenomena at the nanoscale.

Can Copper Nanostructures Sustain High-Quality Plasmons?

Silver, king among plasmonic materials, features low inelastic absorption in the visible-infrared (vis-IR) spectral region compared to other metals. In contrast, copper is commonly regarded as too lossy for actual applications. Here, we demonstrate vis-IR plasmons with quality factors >60 in long copper nanowires (NWs), as determined by electron energy-loss spectroscopy. We explain this result by noticing that most of the electromagnetic energy in these plasmons lies outside the metal, thus becoming less sensitive to inelastic absorption. Measurements for silver and copper NWs of different diameters allow us to elucidate the relative importance of radiative and nonradiative losses in plasmons spanning a wide spectral range down to <20 meV. Thermal population of such low-energy modes becomes significant and generates electron energy gains associated with plasmon absorption, rendering an experimental determination of the NW temperature. Copper is therefore emerging as an attractive, cheap, abundant material platform for high-quality plasmonics in elongated nanostructures.

Fundamental Limit of Plasmonic Cathodoluminescence

We use cathodoluminescence (CL) spectroscopy in a transmission electron microscope to probe the radial breathing mode of plasmonic silver nanodisks. A two-mirror detection system sandwiching the sample collects the CL emission in both directions, that is, backward and forward with respect to the electron beam trajectory. We unambiguously identify a spectral shift of about 8 nm in the CL spectra acquired from both sides and show that this asymmetry is induced by the electron beam itself. By numerical simulations, we confirm the observations and identify the underlying physical effect due to the interference of the CL emission patterns of an electron-beam-induced dipole and the breathing mode. This effect can ultimately limit the achievable fidelity in CL measurements on any system involving multiple excitations and should therefore be considered with care in high-precision experiments.

Probing plasmonic excitation mechanisms and far-field radiation of single-crystalline gold tapers with electrons

Conical metallic tapers represent an intriguing subclass of metallic nanostructures, as their plasmonic properties show interesting characteristics in strong correlation to their geometrical properties. This is important for possible applications such as in the field of scanning optical microscopy, as favourable plasmonic resonance behaviour can be tailored by optimizing structural parameters like surface roughness or opening angle. Here, we review our recent studies, where single-crystalline gold tapers were investigated experimentally by means of electron energy-loss and cathodoluminescence spectroscopy techniques inside electron microscopes, supported by theoretical finite-difference time-domain calculations. Through the study of tapers with various opening angles, the underlying resonance mechanisms are discussed. This article is part of a discussion meeting issue 'Dynamic in situ microscopy relating structure and function'.

Near-field transmission and reflection spectroscopy for revealing absorption and scattering characteristics of single silver nanoplates

Near-field optical microscopy visualizes spatial characteristics of elementary excitations induced in metal nanostructures. However, the microscopy is not able to reveal the absorption and scattering characteristics of the object simultaneously. In this study, we demonstrate a method for revealing the absorption and scattering characteristics of silver nanoplate by using near-field transmission and reflection spectroscopy. Near-field transmission and reflection images show characteristic spatial features attributable to the excited plasmon modes. The near-field refection image near the resonance shows a reversed contrast depending on the observed wavelength. Near-field reflection spectra show unique positive and negative resonant features. We reveal that the optical characteristics and the wavelength dependency of the optical contrast originate from the scattering and absorption properties of the plasmons, with the aid of the electromagnetic simulations.

Unveiling the radiative local density of optical states of a plasmonic nanocavity by STM

Atomically-sharp tips in close proximity of metal surfaces create plasmonic nanocavities supporting both radiative (bright) and non-radiative (dark) localized surface plasmon modes. Disentangling their respective contributions to the total density of optical states remains a challenge. Electroluminescence due to tunnelling through the tip-substrate gap could allow the identification of the radiative component, but this information is inherently convoluted with that of the electronic structure of the system. In this work, we present a fully experimental procedure to eliminate the electronic-structure factors from the scanning tunnelling microscope luminescence spectra by confronting them with spectroscopic information extracted from elastic current measurements. Comparison against electromagnetic calculations demonstrates that this procedure allows the characterization of the meV shifts experienced by the nanocavity plasmonic modes under atomic-scale gap size changes. Therefore, the method gives access to the frequency-dependent radiative Purcell enhancement that a microscopic light emitter would undergo when placed at such nanocavity.

Disentangling the radiative and non-radiative plasmon mode contributions to the total photonic density of states is a challenge. Here, the authors report a procedure to eliminate the electronic-structure factors from scanning tunnelling microscope luminescence spectra to isolate the radiative component.

Vacuum Rabi splitting of a dark plasmonic cavity mode revealed by fast electrons

Recent years have seen a growing interest in strong coupling between plasmons and excitons, as a way to generate new quantum optical testbeds and influence chemical dynamics and reactivity. Strong coupling to bright plasmonic modes has been achieved even with single quantum emitters. Dark plasmonic modes fare better in some applications due to longer lifetimes, but are difficult to probe as they are subradiant. Here, we apply electron energy loss (EEL) spectroscopy to demonstrate that a dark mode of an individual plasmonic bowtie can interact with a small number of quantum emitters, as evidenced by Rabi-split spectra. Coupling strengths of up to 85 meV place the bowtie-emitter devices at the onset of the strong coupling regime. Remarkably, the coupling occurs at the periphery of the bowtie gaps, even while the electron beam probes their center. Our findings pave the way for using EEL spectroscopy to study exciton-plasmon interactions involving non-emissive photonic modes.

Dark plasmonic modes fare better in some applications due to longer lifetimes but, being subradiant, are difficult to probe. The authors apply electron energy loss spectroscopy to demonstrate that a dark mode of a plasmonic cavity can couple with a few quantum emitters to exhibit vacuum Rabi splitting.

Tunable plasmonic HfN nanoparticles and arrays

We present the fabrication of tunable plasmonic hafnium nitride (HfN) nanoparticles. HfN is a metallic refractory material with the potential of supporting plasmon resonances in the visible range, similar to silver and gold, but with the additional benefits of high melting point, chemical stability, and mechanical hardness. However, the preparation of HfN nanoparticles and the experimental demonstration of their plasmonic potential are still in their infancy. Here, high quality HfN thin films were fabricated, for which ellipsometry shows their plasmonic potential. From these thin films, nanorods and nanotriangles were milled using a focused ion beam and the plasmon resonances were identified using cathodoluminescence mapping. As an alternative fabrication strategy, an optimized electron-beam lithography procedure was used to prepare arrays of HfN nanoparticles, which also exhibited clear surface plasmon resonances. These results pave the way to further explore HfN nanoparticles in plasmonically-powered applications where materials robustness is essential.

Visualizing Spatial Variations of Plasmon-Exciton Polaritons at the Nanoscale Using Electron Microscopy

Polaritons are compositional light-matter quasiparticles that have enabled remarkable breakthroughs in quantum and nonlinear optics, as well as in material science. Recently, plasmon-exciton polaritons (plexcitons) have been realized in hybrid material systems composed of transition metal dichalcogenide (TMDC) materials and metal nanoparticles, expanding polaritonic concepts to room temperature and nanoscale systems that also benefit from the exotic properties of TMDC materials. Despite the enormous progress in understanding TMDC-based plexcitons using optical-based methods, experimental evidence of plexcitons formation has remained indirect and mapping their nanometer-scale characteristics has remained an open challenge. Here, we demonstrate that plexcitons generated by a hybrid system composed of an individual silver nanoparticle and a few-layer WS₂ flake can be spectroscopically mapped with nanometer spatial resolution using electron energy loss spectroscopy in a scanning transmission electron microscope. Experimental anticrossing measurements using the absorption-dominated extinction signal provide the ultimate evidence for plexciton hybridization in the strong coupling regime. Spatially resolved EELS maps reveal the existence of unexpected nanoscale variations in the deep-subwavelength nature of plexcitons generated by this system. These findings pioneer new possibilities for in-depth studies of the local atomic structure dependence of polariton-related phenomena in TMDC hybrid material systems with nanometer spatial resolution.

Electron-beam spectroscopy for nanophotonics

Progress in electron-beam spectroscopies has recently enabled the study of optical excitations with combined space, energy and time resolution in the nanometre, millielectronvolt and femtosecond domain, thus providing unique access into nanophotonic structures and their detailed optical responses. These techniques rely on ~1-300 keV electron beams focused at the sample down to sub-nanometre spots, temporally compressed in wavepackets a few femtoseconds long, and in some cases controlled by ultrafast light pulses. The electrons undergo energy losses and gains (also giving rise to cathodoluminescence light emission), which are recorded to reveal the optical landscape along the beam path. This Review portraits these advances, with a focus on coherent excitations, emphasizing the increasing level of control over the electron wavefunctions and ensuing applications in the study and technological use of optically resonant modes and polaritons in nanoparticles, 2D materials and engineered nanostructures.

Far-Field Radiation of Three-Dimensional Plasmonic Gold Tapers near Apexes

Three-dimensional plasmonic gold tapers are widely used structures in nano-optics for achieving imaging at the nanometer scale, enhanced spectroscopy, confined light sources, and ultrafast photoelectron emission. To understand their radiation properties further, especially in the proximity of the apex at the nanoscale, we employ cathodoluminescence spectroscopy with high spatial and energy resolution. The plasmon-induced radiation in the visible spectral range from three-dimensional gold tapers with opening angles of 13° and 47° is investigated under local electron excitation. We observe a much weaker radiation from the apex of the 13° taper than from that of the 47° taper. By means of finite-difference time-domain simulations we show that for small opening angles plasmon modes that are created at the apex are efficiently guided along the taper shaft. In contrast for tapers with larger opening angles, generated plasmon polaritons experience larger radiation damping. Interestingly, we find for both tapers that the most intense radiation comes from locations a few hundreds of nanometers behind the apexes, instead of exactly at the apexes. Our findings provide useful details for the design of plasmonic gold tapers as confined light sources or light absorbers.

Electronic Structure-Dependent Surface Plasmon Resonance in Single Au-Fe Nanoalloys

The relationship between composition and plasmonic properties in noble metal nanoalloys is still largely unexplored. Yet, nanoalloys of noble metals, such as gold, with transition elements, such as iron, have unique properties and a number of potential applications, ranging from nanomedicine to magneto-plasmonics and plasmon-enhanced catalysis. Here, we investigate the localized surface plasmon resonance at the level of the single Au-Fe nanoparticle by applying a strategy that combines experimental measurements using near field electron energy loss spectroscopy with theoretical studies via a full wave numerical analysis and density functional theory calculations of electronic structure. We show that, as the iron fraction increases, the plasmon resonance is blue-shifted and significantly damped, as a consequence of the changes in the electronic band structure of the alloy. This allows the identification of three relevant phenomena to be considered in the design and realization of any plasmonic nanoalloy, specifically: the appearance of new states around the Fermi level; the change in the free electron density of the metal; and the blue shift of interband transitions. Overall, this study provides new opportunities for the control of the optical response in Au-Fe and other plasmonic nanoalloys, which are useful for the realization of magneto-plasmonic devices for molecular sensing, thermo-plasmonics, bioimaging, photocatalysis, and the amplification of spectroscopic signals by local field enhancement.

Manipulating acoustic and plasmonic modes in gold nanostars

In this contribution experimental evidence of plasmonic edge modes and acoustic breathing modes in gold nanostars (AuNSs) is reported. AuNSs are synthesized by a surfactant-free, one-step wet-chemistry method. Optical extinction measurements of AuNSs confirm the presence of localized surface plasmon resonances (LSPRs), while electron energy-loss spectroscopy (EELS) using a scanning transmission electron microscope (STEM) shows the spatial distribution of LSPRs and reveals the presence of acoustic breathing modes. Plasmonic hot-spots generated at the pinnacle of the sharp spikes, due to the optically active dipolar edge mode, allow significant intensity enhancement of local fields and hot-electron injection, and are thus useful for size detection of small protein molecules. The breathing modes observed away from the apices of the nanostars are identified as stimulated dark modes - they have an acoustic nature - and likely originate from the confinement of the surface plasmon by the geometrical boundaries of a nanostructure. The presence of both types of modes is verified by numerical simulations. Both these modes offer the possibility of designing nanoplasmonic antennas based on AuNSs, which can provide information on both mass and polarizability of biomolecules using a two-step molecular detection process.

Spatially and spectrally resolved orbital angular momentum interactions in plasmonic vortex generators

Understanding the near-field electromagnetic interactions that produce optical orbital angular momentum (OAM) is crucial for integrating twisted light into nanotechnology. Here, we examine the cathodoluminescence (CL) of plasmonic vortices carrying OAM generated in spiral nanostructures. The nanospiral geometry defines a photonic local density of states that is sampled by the electron probe in a scanning transmission electron microscope (STEM), thus accessing the optical response of the plasmonic vortex with high spatial and spectral resolution. We map the full spectral dispersion of the plasmonic vortex in spiral structures designed to yield increasing topological charge. Additionally, we fabricate nested nanospirals and demonstrate that OAM from one nanospiral can be coupled to the nested nanospiral, resulting in enhanced luminescence in concentric spirals of like handedness with respect to concentric spirals of opposite handedness. The results illustrate the potential for generating and coupling plasmonic vortices in chiral nanostructures for sensitive detection and manipulation of optical OAM.

Radiation of Dynamic Toroidal Moments

Dynamic toroidal dipoles, a distinguished class of fundamental electromagnetic sources, receive increasing interest and participate in fascinating electrodynamic phenomena and sensing applications. As described in the literature, the radiative nature of dynamic toroidal dipoles is sometimes confounded, intermixing with static toroidal dipoles and plasmonic dark modes. Here, we elucidate this issue and provide proof-of-principle experiments exclusively on the radiation behavior of dynamic toroidal moments. Optical toroidal modes in plasmonic heptamer nanocavities are analyzed by electron energy loss spectroscopy and energy-filtered transmission electron microscopy supported by finite-difference time-domain numerical calculations. Additionally, their corresponding radiation behaviors are experimentally investigated by means of cathodoluminescence. The observed contrasting behaviors of a single dynamic toroidal dipole mode and an antiparallel toroidal dipole pair mode are discussed and elucidated. Our findings further clarify the electromagnetic properties of dynamic toroidal dipoles and serve as important guidance for the use of toroidal dipole moments in future applications.

Adhesive Gold Nanoparticles for Easy and Controlled Surface Coating

Gold nanoparticles (Au NPs) are one of the most important nanomaterials due to their unique properties and broad applications. Among these applications, decorating Au NPs on universal surfaces is highly desired. Herein, we report adhesive Au NPs functionalized by borated dopamine dithiocarbamate. Such Au NPs are nonreactive in colloidal solution but can be activated at an acidic pH to produce adhesive Au NPs and initiate spontaneous surface coating through deprotected catechol-mediated reactions. Easy and controllable surface coating was achieved on materials with distinguished chemical and physical properties because of the high reactivity of catechol. Adhesive Au NPs represent new surface coating method with wide application potentials.

Heterodimeric Plasmonic Nanogaps for Biosensing

We report the study of heterodimeric plasmonic nanogaps created between gold nanostar (AuNS) tips and gold nanospheres. The selective binding is realized by properly functionalizing the two nanostructures; in particular, the hot electrons injected at the nanostar tips trigger a regio-specific chemical link with the functionalized nanospheres. AuNSs were synthesized in a simple, one-step, surfactant-free, high-yield wet-chemistry method. The high aspect ratio of the sharp nanostar tip collects and concentrates intense electromagnetic fields in ultrasmall surfaces with small curvature radius. The extremities of these surface tips become plasmonic hot spots, allowing significant intensity enhancement of local fields and hot-electron injection. Electron energy-loss spectroscopy (EELS) was performed to spatially map local plasmonic modes of the nanostar. The presence of different kinds of modes at different position of these nanostars makes them one of the most efficient, unique, and smart plasmonic antennas. These modes are harnessed to mediate the formation of heterodimers (nanostar-nanosphere) through hot-electron-induced chemical modification of the tip. For an AuNS-nanosphere heterodimeric gap, the intensity enhancement factor in the hot-spot region was determined to be 10⁶, which is an order of magnitude greater than the single nanostar tip. The intense local electric field within the nanogap results in ultra-high sensitivity for the presence of bioanalytes captured in that region. In case of a single BSA molecule (66.5 KDa), the sensitivity was evaluated to be about 1940 nm/RIU for a single AuNS, but was 5800 nm/RIU for the AuNS-nanosphere heterodimer. This indicates that this heterodimeric nanostructure can be used as an ultrasensitive plasmonic biosensor to detect single protein molecules or nucleic acid fragments of lower molecular weight with high specificity.

Coupling of Surface Plasmon Modes and Refractive Index Sensitivity of Hollow Silver Nanoprism

Localized surface plasmon (LSP) modes depend strongly on the morphology of nanoparticle and the surrounding dielectric medium. The hollow nanostructure provides a new way to modulate the surface plasmon modes due to the additional cavity surface. In this work, we study systematically the multipolar surface plasmon modes of hollow silver nanoprism (HSN) by simulation of electron energy loss spectroscopy (EELS) spectra based on the boundary element method (BEM). Herein the effects of the cavity size and position are taken into account. The LSP modes of HSNs are compared with those of perfect silver nanoprism (SN). The red-shift behaviors of multipolar modes can be found as increasing the cavity size. Modes A and C have similar red-shift tendency and obey the plasmon ruler equation, which can be explained by dipole-dipole coupling mode. Meanwhile, the degenerate modes will be split by changing the cavity position, and opposite shift tendencies of split degenerate states are observed. These are caused by different coupling nature of degenerate modes. Moreover, high refractive index sensitivity (RIS) can be obtained for HSN by changing the cavity size and position.

Tunable Multipolar Surface Plasmons in 2D Ti3C2 T x MXene Flakes

2D Ti₃C₂ T _x MXenes were recently shown to exhibit intense surface plasmon (SP) excitations; however, their spatial variation over individual Ti₃C₂ T _x flakes remains undiscovered. Here, we use scanning transmission electron microscopy (STEM) combined with ultra-high-resolution electron energy loss spectroscopy (EELS) to investigate the spatial and energy distribution of SPs (both optically active and forbidden modes) in mono- and multilayered Ti₃C₂ T _x flakes. With STEM-EELS mapping, the inherent interband transition in addition to a variety of transversal and longitudinal SP modes (ranging from visible down to 0.1 eV in MIR) are directly visualized and correlated with the shape, size, and thickness of Ti₃C₂ T _x flakes. The independent polarizability of Ti₃C₂ T _x monolayers is unambiguously demonstrated and attributed to their unusual weak interlayer coupling. This characteristic allows for engineering a class of nanoscale systems, where each monolayer in the multilayered structure of Ti₃C₂ T _x has its own set of SPs with distinctive multipolar characters. Moreover, the tunability of the SP energies is highlighted by conducting in situ heating STEM to monitor the change of the surface functionalization of Ti₃C₂ T _x through annealing at temperatures up to 900 °C. At temperatures above 500 °C, the observed fluorine (F) desorption multiplies the metal-like free electron density of Ti₃C₂ T _x flakes, resulting in a monotonic blue-shift in the SP energy of all modes. These results underline the great potential for the development of Ti₃C₂ T _x-based applications, spanning the visible-MIR spectrum, relying on the excitation and detection of single SPs.

Unveiling and Imaging Degenerate States in Plasmonic Nanoparticles with Nanometer Resolution

Metal nanoparticles host localized plasmon excitations that allow the manipulation of optical fields at the nanoscale. Despite the availability of several techniques for imaging plasmons, direct access into the symmetries of these excitations remains elusive, thus hindering progress in the development of applications. Here, we present a combination of angle-, polarization-, and space-resolved cathodoluminescence spectroscopy methods to selectively access the symmetry and degeneracy of plasmonic states in lithographically fabricated gold nanoprisms. We experimentally reveal and spatially map degenerate states of multipole plasmon modes with nanometer spatial resolution and further provide recipes for resolving optically dark and out-of-plane modes. Full-wave simulations in conjunction with a simple tight-binding model explain the complex plasmon structure in these particles and reveal intriguing mode-symmetry phenomena. Our approach introduces systematics for a comprehensive symmetry characterization of plasmonic states in high-symmetry nanostructures.

Direct Proof of a Defect-Modulated Gap Transition in Semiconducting Nanotubes

Measurements of optical properties at a nanometer level are of central importance for the characterization of optoelectronic devices. It is, however, difficult to use conventional light-probe measurements to determine the local optical properties from a single quantum object with nanometrical inhomogeneity. Here, we successfully measured the optical gap transitions of an individual semiconducting carbon nanotube with defects by using a monochromated electron source as a probe. The optical conductivity extracted from an electron energy-loss spectrum for a certain type of defect presents a characteristic modification near the lowest excitation peak ( E₁₁), where excitons and nonradiative transitions, as well as phonon-coupled excitations, are strongly involved. Detailed line-shape analysis of the E₁₁ peak clearly shows different degrees of exciton lifetime shortening and electronic state modification according to the defect type.

STM Imaging of Localized Surface Plasmons on Individual Gold Nanoislands

An optically modulated scanning tunneling microscopy technique developed for measurement of single-molecule optical absorption is used here to image the light absorption by individual Au nanoislands and Au nanostructures. The technique is shown to spatially map, with nanometer resolution, localized surface plasmons (LSPs) excited within the nanoislands. Electrodynamic simulations demonstrate the correspondence of the measured images to plasmonic near-field intensity maps. The optical STM imaging technique captures the wavelength, polarization, and geometry dependence of the LSP resonances and their corresponding near-fields. Thus, we introduce a tool for real-space, nanometer-scale visualization of optical energy absorption, transport, and dissipation in complex plasmonic nanostructures.

How Dark Are Radial Breathing Modes in Plasmonic Nanodisks?

Due to a vanishing dipole moment, radial breathing modes in small flat plasmonic nanoparticles do not couple to light and have to be probed with a near-field source, as in electron energy loss spectroscopy (EELS). With increasing particle size, retardation gives rise to light coupling, enabling probing breathing modes optically or by cathodoluminescence (CL). Here, we investigate single silver nanodisks with diameters of 150-500 nm by EELS and CL in an electron microscope and quantify the EELS/CL ratio, which corresponds to the ratio of full to radiative damping of the breathing mode. For the investigated diameter range, we find the CL signal to increase by about 1 order of magnitude, in agreement with numerical simulations. Due to reciprocity, our findings corroborate former optical experiments and enable a quantitative understanding of the light coupling of dark plasmonic modes.

Plasmon-trion and plasmon-exciton resonance energy transfer from a single plasmonic nanoparticle to monolayer MoS2

Resonance energy transfer (RET) from plasmonic metal nanoparticles (NPs) to two-dimensional (2D) materials enhances the performance of 2D optoelectronic devices and sensors. Herein, single-NP scattering spectroscopy is employed to investigate plasmon-trion and plasmon-exciton RET from single Au nanotriangles (AuNTs) to monolayer MoS₂, at room temperature. The large quantum confinement and reduced dielectric screening in monolayer MoS₂ facilitates efficient RET between single plasmonic metal NPs and the monolayer. Because of the large exciton binding energy of monolayer MoS₂, charged excitons (i.e., trions) are observed at room temperature, which enable us to study the plasmon-trion interactions under ambient conditions. Tuning of plasmon-trion and plasmon-exciton RET is further achieved by controlling the dielectric constant of the medium surrounding the AuNT-MoS₂ hybrids. Our observation of switchable plasmon-trion and plasmon-exciton RET inspires new applications of the hybrids of 2D materials and metal nanoparticles.