Nanocrystals of Cesium Lead Halide Perovskites (CsPbX₃, X = Cl, Br, and I): Novel Optoelectronic Materials Showing Bright Emission with Wide Color Gamut

Novel hydrogel pillar array based ratiometric multicolor fluorescence biosensor for visual detection of alkaline phosphatase activity

Enzyme-induced in-situ fluorescence is crucial for the development of biosensing mechanisms and correlative spectroscopic analysis. Inspired by simple p-aminophenol (AP)-controlled synthesis and the specific catalytic reaction of 4-aminophenyl phosphate (APP) triggered by alkaline phosphatase (ALP), our research proposed a strategy to prepare carbon dots (CDs) as fluorescent signals for ALP detection using AP and 3-aminopropyltrimethoxysilane (APTMS) as the precursors. The further constructed ratiometric fluorescence sensor reduced the detection limit of ALP to 0.075 μU/mL by a significant margin. Considering the need for point-of-care testing (POCT), we chose agarose for the preparation of portable hydrogel sensors so that even untrained personnel can quickly achieve semi-quantitative visual detection of ALP using colorimetric cards. These results demonstrate the practical applicability of ratiometric fluorescence sensing hydrogel pillar arrays, which are important for high-sensitivity, visualization, and portable rapid enzyme activity assays.

Efficient nanostructured Cs2CuBr2Cl2 perovskite as a fluorescent sensor for the selective "Switch Off" detection of nitrobenzene

Lead halide nanostructured perovskites are well known for their excellent photoluminescence and optoelectronic properties. However, lead toxicity and instability in moisture impedes its suitability for material use. Here we synthesized a highly efficient, lead free, economical, stable Cs2CuBr2Cl2 perovskite nanocrystals (PNCs) via Ligand Assisted Re-Precipitation (LARP) method which is less explored. The sensing application of the synthesized PNCs towards nitro explosives and other small organic compounds were studied. The probe exhibited high selectivity towards nitrobenzene with a lowest detection limit of 57.64 nM. The fluorescent emission intensity was drastically quenched upon the addition of 32 µM nitrobenzene. A Stern-Volmer plot was utilized for the quantification of fluorescence quenching. Further to investigate the quenching mechanism, time correlated single photon counting spectroscopy and other photoluminescence studies were performed pointing out the possibility of fluorescence resonance energy transfer. The work has been further extended to test the capability of the probe to detect nitrobenzene in real water samples and a good recovery percentage ranging from 93-98 % was obtained. Further, a paper strip assay was designed which successfully detected nitrobenzene and can be clearly noticed even with our naked eye making the probe an excellent sensor for nitrobenzene detection.

Metal halide perovskite polymer composites for indirect X-ray detection

Metal halide perovskites (MHPs) have emerged as a promising class of materials for radiation detection due to their high atomic numbers and thus high radiation absorption, tunable and efficient luminescent properties and simple solution processability. Traditional MHP scintillators, however, suffer from environmental degradation, spurring interest in perovskite-polymer composites. This paper reviews recent developments in these composites tailored for scintillator applications. It discusses various synthesis methods, including solution-based and mechanochemical techniques, that enable the formation of composites with enhanced performance metrics such as light yield, detection limit, and environmental stability. The review also covers the remaining challenges and opportunities in fabrication techniques and performance metric evaluations of this class of materials. By offering a comprehensive overview of current research and future perspectives, this paper underscores the potential of perovskite-polymer composites to revolutionize the field of radiation detection.

Ultrasmall CsPbBr3 Nanocrystals as a Recyclable Heterogeneous Photocatalyst in 100% E- and Anti-Markovnikov Sulfinylsulfonation of Terminal Alkynes

The precise synthesis of ultrasmall, monodisperse CsPbBr3 nanocrystals is crucial due to their enhanced photophysical properties resulting from strong quantum confinement effects. Traditional methods struggle with size control, complicating synthesis. Although CsPbBr3 nanocrystals find applications in LEDs and photovoltaics, their use in photocatalysis for organic reactions remains limited. Our study introduces ultrasmall TBIA-CsPbBr3 nanocrystals (∼5.6 nm), synthesized via a three-precursor hot injection method using tribromoisocyanuric acid (TBIA) as a bromine precursor for the first time. These nanocrystals exhibit a near-unity photoluminescence quantum yield (PLQY) of 0.99 and an elevated oxidation potential of +1.80 V. We demonstrate their efficacy as recyclable heterogeneous photocatalysts in a one-pot, 100% E-selective, anti-Markovnikov sulfinylsulfonation of terminal alkynes under visible light, achieving a high product conversion rate (PCR) of 62,500 μmol g-1 h-1 and recyclability for up to five cycles. Density functional theory (DFT) calculations support the exclusive formation of the E-isomer. TBIA-CsPbBr3 outperforms other CsPbBr3 perovskites in photocatalysis, with superior efficiency attributed to their extended excited-state lifetime and higher surface area, which accelerates the organic transformation process.

Dynamically Tunable Circularly Polarized Selectivity in Plasmon-Enhanced Halide Perovskite Nanocrystal Glasses

Ultrafast spin manipulation for optical spin-logic applications requires material systems with strong spin-selective light-matter interactions. The optical Stark effect can realize spin-selective light-matter interactions by breaking the degeneracy of spin-selective transitions with an external electric field. Halide perovskites have large exciton binding energies, which enable a room-temperature optical Stark effect. However, halide perovskites are prone to degradation when interacting with light and polar solvents, limiting further integration with nanophotonic structures. We demonstrate a hybrid material system consisting of CsPbBr3 nanocrystal glass weakly coupled to resonant plasmonic silver nanoparticles, showing ultrafast tunable spin-based polarization selectivity at room temperature. We performed circularly polarized pump-probe characterizations to investigate the optical Stark effect in this material system, which resulted in a maximum energy shift of ∼3.67 meV (detuning energy of 0.11 eV and pump intensity of 0.62 GW/cm2). We show that halide perovskite nanocrystal glasses have excellent resistance to heat and moisture, which may be favorable for integration with nanophotonic structures for further engineering polarization states, energy tuning, and coherence time.

The Perovskite Optoelectronic Devices - A Look at the Future

The perovskite materials are broadly incorporated into optoelectronic devices due to a number of advantages. Their rapid technological progress is related to the relatively simple fabrication process, low production cost and high efficiency. Significant improvement is made in the light emitting, detection performance and device design especially operating in the visible and near-infrared regions. This review presents the status and possible future development of the perovskite devices such as solar cells, photodetectors, and light-emitting diodes. The fundamental properties of perovskite materials related to their effective device applications are summarized. Since the development of the perovskite technology is mainly driven by the revolutionary evolution of the semiconductor perovskite solar cell as a robust candidate for next-generation solar energy harvesting, this topic is considered first. The device engineering of various perovskite photodetector structures, including perovskite quantum dot photodetectors, is then discussed in detail. Their performance is compared with the current commercial photodetectors available on the global market together with their challenges. Finally, the considerable progress in the fabrication of the perovskite light-emitting diodes with external quantum efficiency exceeding 20% is presented. The paper is completed in an attempt to determine the development of perovskite optoelectronic devices in the future.

Orthogonal Electrochemical Stability of Bulk and Surface in Lead Halide Perovskite Thin Films and Nanocrystals

Lead halide perovskites have attracted significant attention for their wide-ranging applications in optoelectronic devices. A ubiquitous element in these applications is that charging of the perovskite is involved, which can trigger electrochemical degradation reactions. Understanding the underlying factors governing these degradation processes is crucial for improving the stability of perovskite-based devices. For bulk semiconductors, the electrochemical decomposition potentials depend on the stabilization of atoms in the lattice-a parameter linked to the material's solubility. For perovskite nanocrystals (NCs), electrochemical surface reactions are strongly influenced by the binding equilibrium of passivating ligands. Here, we report a spectro-electrochemical study on CsPbBr3 NCs and bulk thin films in contact with various electrolytes, aimed at understanding the factors that control cathodic degradation. These measurements reveal that the cathodic decomposition of NCs is primarily determined by the solubility of surface ligands, with diminished cathodic degradation for NCs in high-polarity electrolyte solvents where ligand solubilities are lower. However, the solubility of the surface ligands and bulk lattice of NCs are orthogonal, such that no electrolyte could be identified where both the surface and bulk are stabilized against cathodic decomposition. This poses inherent challenges for electrochemical applications: (i) The electrochemical stability window of CsPbBr3 NCs is constrained by the reduction potential of dissolved Pb2+ complexes, and (ii) cathodic decomposition occurs well before the conduction band can be populated with electrons. Our findings provide insights to enhance the electrochemical stability of perovskite thin films and NCs, emphasizing the importance of a combined selection of surface passivation and electrolyte.

Bifunctional Ligand Passivation Enables Stable Blue Mixed-Halide CsPb(Br/Cl)3 Perovskite Quantum Dots toward Light-Emitting Diodes

Mixed-halide CsPb(Br/Cl)3 perovskite quantum dots (PeQDs) have attracted extensive attention in light-emitting diodes (LEDs), but their low photoluminescent efficiency and especially poor stability impede their practical applications. Here, we employ bifunctional didodecyldimethylammonium thiocyanide (DDASCN) with a pseudohalogen SCN- and branched DDA+ to obtain blue-emitting CsPbBr2Cl PeQDs. DDASCN significantly boosts the photoluminescence quantum yield to 92% by inhibiting nonradiative recombination. Importantly, DDASCN PeQDs show excellent stabilities against air, UV light, heat, and polar solvents. These improved performances were explained by density functional theory calculation, which shows that SCN- fills the Cl- vacancy by simultaneously binding with undercoordinated Pb2+ and Cs+, while DDA+ connects undercoordinated Br- and lies parallel to the PeQD core, leading to efficient passivation and a strong binding capacity. Finally, we achieved high-performance white LEDs by integrating our PeQDs, resulting in a color-rendering index of 92.9, a color gamut of 119.61%, and chromaticity coordinates of (0.33, 0.33). This provides an effective method to obtain efficient and stable CsPb(Br/Cl)3 PeQDs for practical applications.

The Promise and Challenges of Inverted Perovskite Solar Cells

Recently, there has been an extensive focus on inverted perovskite solar cells (PSCs) with a p-i-n architecture due to their attractive advantages, such as exceptional stability, high efficiency, low cost, low-temperature processing, and compatibility with tandem architectures, leading to a surge in their development. Single-junction and perovskite-silicon tandem solar cells (TSCs) with an inverted architecture have achieved certified PCEs of 26.15% and 33.9% respectively, showing great promise for commercial applications. To expedite real-world applications, it is crucial to investigate the key challenges for further performance enhancement. We first introduce representative methods, such as composition engineering, additive engineering, solvent engineering, processing engineering, innovation of charge transporting layers, and interface engineering, for fabricating high-efficiency and stable inverted PSCs. We then delve into the reasons behind the excellent stability of inverted PSCs. Subsequently, we review recent advances in TSCs with inverted PSCs, including perovskite-Si TSCs, all-perovskite TSCs, and perovskite-organic TSCs. To achieve final commercial deployment, we present efforts related to scaling up, harvesting indoor light, economic assessment, and reducing environmental impacts. Lastly, we discuss the potential and challenges of inverted PSCs in the future.

Origin of Dopant-Carrier Exchange Coupling and Excitonic Zeeman Splitting in Mn2+-Doped Lead Halide Perovskite Nanocrystals

Low-dimensional metal halide perovskites have unique optical and electrical properties that render them attractive for the design of diluted magnetic semiconductors. However, the nature of dopant-exciton exchange interactions that result in spin-polarization of host-lattice charge carriers as a basis for spintronics remains unexplored. Here, we investigate Mn2+-doped CsPbCl3 nanocrystals using magnetic circular dichroism spectroscopy and show that Mn2+ dopants induce excitonic Zeeman splitting which is strongly dependent on the nature of the band-edge structure. We demonstrate that the largest splitting corresponds to exchange interactions involving the excited state at the M-point along the spin-orbit split-off conduction band edge. This splitting gives rise to an absorption-like C-term excitonic MCD signal, with the estimated effective g-factor (geff) of ca. 70. The results of this work help resolve the assignment of absorption transitions observed for metal halide perovskite nanocrystals and allow for a design of new diluted magnetic semiconductor materials for spintronics applications.

Energy deposition in liquid scintillators composed of CsPbBr3 colloidal nanocrystal dispersions

Liquid scintillation processes are commonly used for various applications involving radioactivity levels analysis, as well as experiments in the field of high energy physics, most commonly in the form of organic scintillating cocktails. In this paper, we explore the potential of halide perovskite nanocrystal colloidal dispersions as an alternative to those organic mixtures. After an optimization of the nanocrystals' mean size and surface chemistry, the scintillation yield of these composite mixtures is evaluated through Compton - Triple to Double Coincidence Ratio experiments and compared with commercial liquid scintillator. The obtained results shine a light on the energy deposition mechanisms in nanocrystals-based liquid scintillators.

Biexciton Emission in CsPbBr3 Nanocrystals: Polar Facet Matters

The metal halide perovskite nanocrystals exhibit a remarkable tolerance to midgap defect states, resulting in high photoluminescence quantum yields. However, the potential of these nanocrystals for applications in display devices is hindered by the suppression of biexcitonic emission due to various Auger recombination processes. By adopting single-particle photoluminescence spectroscopy, herein, we establish that the biexcitonic quantum efficiency increases with the increase in the number of facets on cesium lead bromide perovskite nanocrystals, progressing from cube to rhombic dodecahedron to rhombicuboctahedron nanostructures. The observed enhancement is attributed mainly to an increase in their surface polarity as the number of facets increases, which reduces the Coulomb interaction of charge carriers, thereby suppressing Auger recombination. Moreover, Auger recombination rate constants obtained from the time-gated photon correlation studies exhibited a discernible decrease as the number of facets increased. These findings underscore the significance of facet engineering in fine-tuning biexciton emission in metal halide perovskite nanocrystals.

Composition-dependent band structure parameters and band-gap bowing effect in a caesium lead mixed halide system: a cyclic voltammetry investigation

Cyclic voltammetry techniques have been employed to study the effect of halide substitution on the band edge parameters and band gap bowing effect in the case of CsPbX3 [X = I, Br, Cl] perovskite nanocrystals (PNCs). A series of compositions, viz. CsPbI3, CsPb(I-Br)3, CsPbBr3, CsPb(Br-Cl)3 and CsPbCl3, have been prepared by a hot injection method. From powder XRD and HR-TEM analysis, the formation of a highly crystalline, cubic phase of the perovskite having size in the range from 7-20 nm has been confirmed. Sharp peaks in the photoluminescence spectra suggest the formation of quantum dots with narrow-size distribution. The composition-dependent optical band gap (εopgap) for CsPbX3 displays a systematic shift towards shorter wavelengths from I to Br to Cl substitutions. The cyclic voltammetry investigation on the dispersion of PNCs in nonaqueous solvents yielded prominent cathodic and anodic peaks. These are correlated to conduction (e1) and valence band edge (h1) positions, respectively. The h1 has been decreased substantially with I to Br to Cl in CsPbX3. Meanwhile, e1 shows a marginal increase. The values derived from CV data demonstrated an excellent match with UVPS results, reported for a similar system. From these results, the quasi-particle gap (εqpgap) and exciton binding energy have been estimated for all the compositions. The negative band gap bowing effect noted in these PNCs is attributed to the size quantization effect. The band-edge parameters reported in this work will be valuable in matching these heterojunctions with suitable electron/hole transport materials for optimum device-performance.

Switchable Bulk Photovoltaic Effect in Intrinsically Ferroelectric 3D All-Inorganic CsPbBr3 Perovskite Nanocrystals

Ferroelectric all-inorganic halide perovskite nanocrystals with both spontaneous polarization and visible light absorption are promising candidates for designing ferroelectric photovoltaic applications. It remains a challenge to realize ferroelectric photovoltaic devices with all-inorganic halide perovskites that can be operated in the absence of an external electric field. Here we report that a popular all-inorganic halide perovskite nanocrystal, CsPbBr3, exhibits a ferroelectricity-driven photovoltaic effect under visible light in the absence of an external electric field. Pristine CsPbBr3 nanocrystals exhibit intrinsic ferroelectric key properties with a notable saturated polarization of ∼0.15 μC/cm2 and a high Curie temperature of 462 K, driven by the stereochemical activity of the Pb(II) lone pair. Furthermore, application of an external electric field allows the photovoltaic effect to be enhanced and the spontaneous polarization to be switched with the direction of the electric field. CsPbBr3 nanocrystals exhibit a robust fatigue performance and a prolonged photoresponse under continuous illumination in the absence of an external electric field. These findings establish all-inorganic halide perovskite nanocrystals as potential candidates for designing photoferroelectric devices by coupling optical functionalities and ferroelectric responses.

Precise Laser-Modulated Anion Exchange on Ultraflexible Perovskite Films for Multicolor Patterns

Lead halide perovskite anion exchange reactions tend to be spontaneous and rapid. To achieve precise control of anion exchange and modulate the bandgaps of perovskites to meet the demands in full-color displays, a laser-induced liquid-phase anion exchange method is developed in this paper. CsPbBr3 perovskites embedded in a polymer matrix are converted to CsPb(BrxCl1-x)3 and CsPb(BrxI1-x)3 perovskites, realizing the shift from green fluorescence to blue and red fluorescence. By changing the laser parameters, the anion exchange extent and luminescence wavelength are precisely tuned, with the maximum tuning wavelength range of 431-696 nm. Due to the focusing properties of the laser, the spatial position of anion exchange can be precisely controlled, which is significant for realizing fast and accurate patterning without masks. Based on this method, blue patterns with different light-emitting wavelengths are fabricated. RGB three-color patterns on a single perovskite composite film are successfully prepared by further replacement of halogen ions. More importantly, the polymer matrix provides ultraflexibility and good stability for the films; even if the composite films are arbitrarily folded or repeatedly bent, they can still maintain good luminous intensity. This method will show great potential in the field of flexible, full-color displays.

Symmetry-Guided Engineering of Polarization by 2D Moiré Metasurfaces

Cylindrical vector (CV) beams exhibit spatially varying polarization important in optical communication, super-resolution microscopy, and high-throughput information processing. Compared to radially or azimuthally polarized CV beams that are cylindrically symmetric, hybrid-electric (HE) beams offer increased optical tunability because of their polygonally symmetric polarizations. However, efforts to generate and isolate HE beams have relied on bulky optical assemblies or devices with complex and stringent fabrication requirements. Here, we report a moiré-based metasurface approach to engineer HE polarization states with high degrees of rotational symmetry. Importantly, polarization symmetries can be tailored based only on the reciprocal lattice of the metasurface and not the real-space patterns. Our modular method outlines important design principles for shaping light at the nanoscale.

Pattern-Matched Polymer Ligands Toward Near-Perfect Synergistic Passivation for High-Performance and Stable Br/Cl Mixed Perovskite Light-Emitting Diodes

Mixed Br/Cl perovskite nanocrystals (PeNCs) exhibit bright pure-blue emission benefiting for fulfilling the Rec. 2100 standard. However, phase segregation remains a significant challenge that severely affects the stability and emission spectrum of perovskite light-emitting diodes (PeLEDs). Here, we demonstrate the optimization of the spacing between polydentate functional groups of polymer ligands to match the surface pattern of CsPbBr1.8Cl1.2 PeNCs, resulting in effective synergistic passivation effect and significant improvements in PeLED performances. The block and alternating copolymers with different inter-functional group spacing are facilely synthesized as ligands for PeNCs. Surprisingly, block copolymers with a higher functional group density do not match PeNCs, while alternating copolymers enable efficient PeNCs with the high photoluminescence intensity, low non-radiative recombination rate and high exciton binding energy. Density functional theory calculations clearly confirm the almost perfect match between alternating copolymers and PeNCs. Finally, pure-blue PeLEDs are achieved with the emission at 467 nm and Commission Internationale de l'Eclairage (CIE) coordinates of (0.131, 0.071), high external quantum efficiency (9.1 %) and record spectral and operational stabilities (~80 mins) in mixed-halide PeLEDs. Overall, this study contributes to designing the polymer ligands and promoting the development of high-performance and stable pure-color PeLEDs towards display applications.

Efficient C(sp3)-H Bond Oxidation on Perovskite Quantum Dots Based on Ce-Oxygen Affinity

Perovskite quantum dots (QDs) have shown attractive prospects in the field of visible photocatalysis, especially in the synthesis of high value-added chemicals. However, under aerobic conditions, the stable operation of QD catalysts has been limited by the reactive oxygen species (ROS) generated by photoexcitation, especially superoxide species O2⋅-. Here, we propose a strategy of Ce3+ doping in perovskite QDs to guide superoxide species for photocatalytic oxidation reactions. In C(sp3)-H bond oxidation of hydrocarbons, superoxide species were rapidly generated and efficiently utilized on the surface of perovskite QDs, which achieves the stable operation of the catalytic system and obtains a high product conversion rate (15.3 mmol/g/h for benzaldehydes). The mechanism studies show that the strong Ce-oxygen affinity accelerates the relaxation process of photoinduced exciton transfer to superoxide species and inhibits the radiative recombination pathway. This work provides a new idea of utilizing oxygen species on perovskite surface and broadens the design strategy of high-performance QD photocatalysts.

Perovskite Light-Emitting Diodes with Quantum Wires and Nanorods

Perovskite materials, celebrated for their exceptional optoelectronic properties, have seen extensive application in the field of light-emitting diodes (LEDs), where research is as abundant as the proverbial "carloads of books." In this review, the research of perovskite materials is delved into from a dimensional perspective, with a focus on the exemplary performance of low-dimensional perovskite materials in LEDs. This discussion predominantly revolves around perovskite quantum wires and perovskite nanorods. Perovskite quantum wires are versatile in their growth, compatible with both solution-based and vapor-phase growth, and can be deposited over large areas-even on spherical substrates-to achieve commendable electroluminescence (EL). Perovskite nanorods, on the other hand, boast a suite of superior characteristics, such as polarization properties and tunability of the transition dipole moment, endowing them with the great potential to enhance light extraction efficiency. Furthermore, zero-dimensional (0D) perovskite materials like nanocrystals (NCs) are also the subject of widespread research and application. This review reflects on and synthesizes the unique qualities of the aforementioned materials while exploring their vital roles in the development of high-efficiency perovskite LEDs (PeLEDs).

Toward Thin-Film Laser Diodes with Metal Halide Perovskites

Metal halide perovskite semiconductors hold a strong promise for enabling thin-film laser diodes. Perovskites distinguish themselves from other non-epitaxial media primarily through their ability to maintain performance at high current densities, which is a critical requirement for achieving injection lasing. Coming in a wide range of varieties, numerous perovskites delivered low-threshold optical amplified spontaneous emission and optically pumped lasing when combined with a suitable optical cavity. A progression toward electrically pumped lasing requires the development of efficient light-emitting structures with reduced optical losses and high radiative efficiency at lasing-level current densities. This involves a set of important trade-offs in terms of material choice, stack and waveguide design, as well as resonator integration. In this Perspective, the key milestones are highlighted that have been achieved in the study of passive optical waveguides and light-emitting diodes, and these learnings are translated toward more complex laser diode architectures. Finally, a novel resonator integration route is proposed that is capable of relaxing optical and electrical design constraints.

Effect of Mn2+doping and DDAB-assisted postpassivation on the structural and optical properties of CsPb(Cl/Br)3halide perovskite nanocrystals

Cesium lead halide perovskite (CsPbX3; X = Cl, Br, I) nanocrystals showing intense band-edge emission and high photoluminescence quantum yield are known to be a potential candidate for application in optoelectronic devices. However, controlling toxicity due to the presence of Pb2+in lead-based halide perovskites is a major challenge for the environment that needs to be tackled cautiously. In this work, we have partially replaced Pb2+with Mn2+ions in the CsPb(Cl/Br)3nanocrystals and investigated their impact on the structural and optical properties. The Rietveld refinement shows that CsPbCl2Br nanocrystals possess a cubic crystal structure withPm3̅mspace group, the Mn2+doping results in the contraction of the unit cell. The CsPb(Cl/Br)3: Mn nanocrystals show a substantial change in the optical properties with an additional emission band at ∼588 nm through a d-d transition, changing the emission color from blue to pink. Here, a didodecyldimethylammonium bromide (DDAB) ligand that triggers both anion and ligand exchange in the CsPb(Cl/Br)3: Mn nanocrystals have been used to regulate the exchange reaction and tune the emission color of halide perovskites by changing the peak position and the PL intensities of band-edge and Mn2+defect states. We have also shown that oleic acid helps in the desorption of oleylamine capping from the CsPb(Cl/Br)3: Mn nanocrystal surfaces and DDAB, resulting in the substitution of Cl-with Br-as well as provides capping with shorter branched length ligand which led to increase in the overall PL intensity by many folds.

Ultrafast Rejuvenation of Aged CsPbI3 Quantum Dots and Efficiency Improvement by Sequential 1-Dodecanethiol Post-Treatment Strategy

Metal halide perovskite CsPbI3 quantum dots (QDs) have sparked widespread research due to their intriguing optoelectronic. However, the CsPbI3 QDs undergo inevitable aging and luminescence quenching caused by the weak binding ability of oleate (OA-)/oleylammonium (OAm+), hindering further practical application. Herein, we have realized ultrafast rejuvenation of the aged CsPbI3 QDs that have lost their photoluminescence performance based on a 1-dodecanethiol (DDT) surface ligand to restore the outstanding red light emission with a high photoluminescence quantum yield (PLQY) from 25 to 90%. Furthermore, CsPbI3 QDs with DDT surface treatment maintain a cubic phase and high PLQY value even after 35 days. The DDT ligands can form a strong bond with Pb2+ and passivate I- ion vacancies, enhancing radiative recombination efficiency and thereby improving the PLQY of the QDs. The stable yet easily accessible surface of the DDT-capped CsPbI3 QDs was successfully employed as white LEDs and exhibited considerable enhanced luminous performance, suggesting promising application in solid-state lighting fields.

Dithiothreitol-functionalized perovskite-based visual sensing array capable of distinguishing food oils

At present, the combination of fingerprint recognition methods and environmentally friendly and economical analytical instruments is becoming increasingly important in the food industry. Herein, a dithiothreitol (DTT)-functionalized CsPbBr3-based colorimetric sensor array is developed for qualitatively differentiating multiple food oils. In this sensor array composition, two types of iodides (octadecylammonium iodide (ODAI) and ZnI2) are used as recognition elements, and CsPbBr3 is used as a signal probe for the sensor array. Different food oils oxidize iodides differently, resulting in different amounts of remaining iodides. Halogen ion exchange occurs between the remaining iodides and CsPbBr3, leading to different colors observed under ultraviolet light, enabling a unique fingerprint for each food oil. A total of five food oils exhibit their unique colorimetric array's response patterns and were successfully differentiated by linear discriminant analysis (LDA), realizing 100% classification accuracy.

Surface Structure of Lecithin-Capped Cesium Lead Halide Perovskite Nanocrystals Using Solid-State and Dynamic Nuclear Polarization NMR Spectroscopy

Inorganic colloidal cesium lead halide perovskite nanocrystals (NCs) encapsulated by surface capping ligands exhibit tremendous potential in optoelectronic applications, with their surface structure playing a pivotal role in enhancing their photophysical properties. Soy lecithin, a tightly binding zwitterionic surface-capping ligand, has recently facilitated the high-yield synthesis of stable ultraconcentrated and ultradilute colloids of CsPbX3 NCs, unlocking a myriad of potential device applications. However, the atomic-level understanding of the ligand-terminated surface structure remains uncertain. Herein, we use a versatile solid-state nuclear magnetic resonance (NMR) spectroscopic approach, in combination with dynamic nuclear polarization (DNP) and atomistic molecular dynamics (MD) simulations, to explore the effect of lecithin on the core-to-surface structures of CsPbX3 (X = Cl or Br) perovskites, sized from micron to nanoscale. Surface-selective (cross-polarization, CP) solid-state and DNP NMR (133Cs and 207Pb) methods were used to differentiate the unique surface and core chemical environments, while the head-groups {trimethylammonium [-N(CH3)3+] and phosphate (-PO4-)} of lecithin were assigned via 1H, 13C, and 31P NMR spectroscopy. A direct approach to determining the surface structure by capitalizing on the unique heteronuclear dipolar couplings between the lecithin ligand (1H and 31P) and the surface of the CsPbCl3 NCs (133Cs and 207Pb) is demonstrated. The 1H-133Cs heteronuclear correlation (HETCOR) DNP NMR indicates an abundance of Cs on the NC surface and an intimate proximity of the -N(CH3)3+ groups to the surface and subsurface 133Cs atoms, supported by 1H{133Cs} rotational-echo double-resonance (REDOR) NMR spectroscopy. Moreover, the 1H-31P{207Pb} CP REDOR dephasing curve provides average internuclear distance information that allows assessment of -PO4- groups binding to the subsurface Pb atoms. Atomistic MD simulations of ligand-capped CsPbCl3 surfaces aid in the interpretation of this information and suggest that ligand -N(CH3)3+ and -PO4- head-groups substitute Cs+ and Cl- ions, respectively, at the CsCl-terminated surface of the NCs. These detailed atomistic insights into surface structures can further guide the engineering of various relevant surface-capping zwitterionic ligands for diverse metal halide perovskite NCs.

Precursor Chemistry of Lead Bromide Perovskite Nanocrystals

We investigate the early stages of cesium lead bromide perovskite formation through absorption spectroscopy of stopped-flow reactions, high-throughput mapping, and direct synthesis and titration of potential precursor species. Calorimetric and spectroscopic measurements of lead bromide complex titrations combined with theoretical calculations suggest that bromide complexes with higher coordination numbers than previously considered for nonpolar systems can better explain observed behaviors. Synthesis mapping of binary lead halides reveals multiple lead bromide species with absorption peaks higher than 300 nm, including a previously observed species with a peak at 313 nm and two species with peaks at 345 and 370 nm that also appear as reaction intermediates during the formation of lead bromide perovskites. Based on theoretical calculations of excitonic energies that match within 50 meV, we give a preliminary assignment of these species as two-dimensional magic-sized clusters with side lengths of 2, 3, and 4 unit cells. Kinetic measurements of the conversion of benzoyl bromide precursor are connected to stopped-flow measurements of product formation and demonstrate that the formation of complexes and magic-sized clusters (i.e., nucleation) is controlled by precursor decomposition, whereas the growth rate of 2D and 3D perovskites is significantly slower.

Chiral Perovskite Heterostructure Films of CsPbBr3 Quantum Dots and 2D Chiral Perovskite with Circularly Polarized Luminescence Performance and Energy Transfer

This work reports the synthesis of chiral perovskite heterostructure films by combining a two-dimensional (2D) chiral (R-/S-MBA)2PbI4 perovskite with CsPbBr3 quantum dots (QDs). The as-synthesized chiral heterostructure films exhibit obvious circularly polarized luminescence (CPL) properties, even though pure 2D chiral perovskite cannot present photoluminescence. It indicates that the chirality of the excited state of the QDs originates from the 2D chiral perovskite. The circular polarization-resolved transient absorption (TA) spectra further demonstrate that the CPL response of heterostructure films originates from the energy transfer between the chiral perovskite layer and QDs layer and the suppression of spin relaxation, which induces the imbalance of the spin population of excited states in QDs layer. In addition, the photoluminescence (PL), circular dichroism (CD), and CPL spectra of these heterostructure films can be controlled by varying the thickness and component of the chiral perovskite layer, which demonstrates that the anion exchange between chiral perovskite and CsPbBr3 QDs can tune the chemical composition and optoelectronic properties due to the low bonding energy difference between them and decrease the strain within the QDs layer to reduce the radiative recombination lifetime. This work provides guidance for the synthesis of chiral perovskites with a strong CPL response and further provides insight into the origination of CPL.

New Lead-free Hybrid Layered Double Perovskite Halides: Synthesis, Structural Transition and Ultralow Thermal Conductivity

Hybrid layered double perovskites (HLDPs), representing the two-dimensional manifestation of halide double perovskites, have elicited considerable interest owing to their intricate chemical bonding hierarchy and structural diversity. This intensified interest stems from the diverse options available for selecting alternating octahedral coordinated trivalent [M(III)] and monovalent metal centers [M(I)], along with the distinctive nature of the cationic organic amine located between the layers. Here, we have synthesized three new compounds with general formula (R'/R'')4/2M(III)M(I)Cl8; where R'=C3H7NH3 (i.e. 3N) and R''=NH3C4H8NH3 (i.e. 4N4); M(III)=In3+ or Ru3+; M(I)=Cu+ by simple solution-based acid precipitation method. The structural analysis reveals that (4N4)2CuInCl8 and (4N4)2CuRuCl8 adopt the layered Dion Jacobson (DJ) structure, whereas (3N)4CuInCl8 exhibits layered Ruddlesden Popper (RP) structure. The alternative octahedra within the inorganic layer display distortions and tilting. Three compounds show temperature-dependent structural phase transitions where changes in the staking of inorganic layer, extent of octahedral tilting and reorientation of organic spacers with temperature have been noticed. We have achieved ultralow lattice thermal conductivity (κL) in the HLDPs in the 2 to 300 K range, marking a distinctive feature within the realm of HLDP systems. The RP-HLDP compound, (3N)4CuInCl8, demonstrates anisotropy in κL while measured parallel and perpendicular to layer stacking, showcasing ultralow κL of 0.15 Wm-1K-1 at room temperature, which is one of the lowest values obtained among Pb-free metal halide perovskite. The observed ultralow κL in three new HLDPs is attributed to significant lattice anharmonicity arising from the chemical bonding heterogeneity and soft crystal structure, which resulted in low-energy localized optical phonon modes that suppress heat-carrying acoustic phonons.

Implications for applicability of the photodegradation and self-recovery of green-emitting CsPbBr3 perovskite nanocrystals

CsPbBr3 nanocrystals (NCs) synthesized by the conventional hot-injection method are photochromatic luminescent nanomaterials due to the photoinduced desorption and re-adsorption of the surface ligands. The apparent color and the luminescence intensity were changed significantly during excitation light irradiation and following dark storage; however, the emission wavelength was almost retained. This work investigates the change in emission color of light-emitting diode lighting using the CsPbBr3 NCs to realize photochromatic luminescence. The results showed definite shifts in emission color caused by changes in optical absorption and green luminescence intensity of the NCs, potentially broadening the application feasibility of CsPbBr3 NCs as photochromatic luminescent nanomaterials.

Doping bilayer hole-transport polymer strategy stabilizing solution-processed green quantum-dot light-emitting diodes

Quantum-dot light-emitting diodes (QLEDs) are solution-processed electroluminescence devices with great potential as energy-saving, large-area, and low-cost display and lighting technologies. Ideally, the organic hole-transport layers (HTLs) in QLEDs should simultaneously deliver efficient hole injection and transport, effective electron blocking, and robust electrochemical stability. However, it is still challenging for a single HTL to fulfill all these stringent criteria. Here, we demonstrate a general design of doping-bilayer polymer-HTL architecture for stabilizing high-efficiency QLEDs. We show that the bilayer HTLs combining the electrochemical-stable polymer and the electron-blocking polymer unexpectedly increase the hole injection barrier. We mitigated the problem by p-doping of the underlying sublayer of the bilayer HTLs. Consequently, green QLEDs with an unprecedented maximum luminance of 1,340,000 cd m-2 and a record-long operational lifetime (T95 lifetime at an initial luminance of 1000 cd m-2 is 17,700 hours) were achieved. The universality of the strategy is examined in various polymer-HTL systems, providing a general route toward high-performance solution-processed QLEDs.

Unraveling the excitonics of light emission from metal-halide perovskite quantum dots

Metal halide semicondictor perovskites have been under intense investigation for their promise in light absorptive applications like photovoltaics. They have more recently experienced interest for their promise in light emissive applications. A key aspect of perovskites is their glassy, ionic lattice that exhibits dynamical disorder. One possible result of this dynamical disorder is their strong coupling between electronic and lattice degrees of freedom which may confer remarkable properties for light emission such as defect tolerance. How does the system, comprised of excitons, couple to the bath, comprised of lattice modes? How does this system-bath interaction give rise to novel light emissive properties and how do these properties give insight into the nature of these materials? We review recent work from this group in which time-resolved photoluminescence spectroscopy is used to reveal such insights. Based upon a fast time resolution of 3 ps, energy resolution, and temperature dependence, a wide variety of insights are gleaned. These insights include: lattice contributions to the emission linewidths, multiexciton formation, hot carrier cooling, excitonic fine structure, single dot superradiance, and a breakdown of the Condon approximation, all due to complex structural dynamics in these materials.

Lattice doping of lanthanide ions in Cs2ZrCl6 nanocrystals enabling phase transition and tunable photoluminescence

Dopants can endow lead-free perovskite nanocrystals with novel photoelectric properties. However, understanding the effect of dopants on the structure and energy transfer of lead-free perovskite nanocrystals remains limited. In this work, we synthesize zero-dimensional Cs2ZrCl6 nanocrystals with a blue light quantum yield of up to 75.6% by an improved hot-injection method. And we introduce trace amounts of lanthanide ions (Ln3+) (<∼8%) in the lattice of nanocrystals and establish an effective energy transfer channel from self-trapped excitons (STEs) to various Ln3+ ions (Tb3+, Eu3+, Dy3+, Sm3+, and Pr3+), which can achieve tunable photoluminescence between red, green and blue. Interestingly, with increasing Ln3+ concentrations (>∼10%), the phase transition from the cubic phase Cs2ZrCl6:Ln3+ to the monoclinic phase Cs3LnCl6:Zr4+ occurred, while Zr4+ ions began to act as dopants. And a new energy transfer channel from dopant [ZrCl6]2- to host Ln3+ ions was established in the Cs3LnCl6 host accompanied by enhanced broadband photoluminescence excitation (PLE) and photoluminescence (PL). In particular, the photoluminescence quantum yield (PLQY) of Tb3+ ions increases from 0.77% to 54% upon the phase transition (under 276 nm excitation). Our study provides new insights into the effects of dopants on the structure of perovskite nanocrystals and is beneficial to the design of a variety of light-emitting materials for optoelectronic applications.

In Situ Formation of Iodide Precursor for Perovskite Quantum Dots with Application in Efficient Solar Cells

Perovskite quantum dots (PQDs) become a kind of competitive material for fabricating high-performance solar cells due to their solution processability and outstanding optoelectronic properties. However, the current synthesis method of PQDs is mostly based on the binary-precursor method, which results in a large deviation of the I/Pb input ratio in the reaction system from the stoichiometric ratio of PQDs. Herein, a ternary-precursor method with an iodide source self-filling ability is reported for the synthesis of the CsPbI3 PQDs with high optoelectronic properties. Systematically experimental characterizations and theoretical calculations are conducted to fundamentally understand the effects of the I/Pb input molar ratio on the crystallographic and optoelectronic properties of PQDs. The results reveal that increasing the I/Pb input molar ratio can obtain ideal cubic structure PQDs with iodine-rich surfaces, which can significantly reduce the surface defects of PQDs and realize high orientation of PQD solids, facilitating charge carrier transport in the PQD solids with diminished nonradiative recombination. Consequently, the PQD solar cells exhibit an impressive efficiency of 15.16%, which is largely improved compared with that of 12.83% for the control solar cell. This work provides a feasible strategy for synthesizing high-quality PQDs for high-performance optoelectronic devices.

Anisotropic electronic coupling in three-dimensional assembly of CsPbBr3 quantum dots

Cesium lead halide (CsPbX3, X = Cl, Br, or I) perovskite quantum dots (PeQDs) show promise for next-generation optoelectronics. In this study, we controlled the electronic coupling between PeQD multilayers using a layer-by-layer method and dithiol linkers of varying structures. The energy shift of the first excitonic peak from monolayer to bilayer decreases exponentially with increasing interlayer spacer distance, indicating the resonant tunnelling effect. X-ray diffraction measurements revealed anisotropic inter-PeQD distances in multiple layers. Photoluminescence (PL) analysis showed lower energy emission in the in-plane direction due to the electronic coupling in the out-of-plane direction, supporting the anisotropic electronic state in the PeQD multilayers. Temperature-dependent PL and PL lifetimes indicated changes in exciton behaviour due to the delocalized electronic state in PeQD multilayers. Particularly, the electron-phonon coupling strength increased, and the exciton recombination rate decreased. This is the first study demonstrating controlled electronic coupling in a three-dimensional ordered structure, emphasizing the importance of the anisotropic electronic state for high-performance PeQDs devices.

Single CsPbBr3 Perovskite Microcrystals: From Microcubes to Microrods with Improved Crystallinity and Green Emission

All-inorganic perovskite materials are promising in optoelectronics, but their morphology is a key parameter for achieving high device efficiency. We prepared CsPbBr3 perovskite microcrystals with different shapes grown directly on planar substrate by conventional drop casting. We observed the formation of CsPbBr3 microcubes on bare indium tin oxide (ITO)-coated glass. Interestingly, with the same technique, CsPbBr3 microrods were obtained on (3-Aminopropyl) triethoxysilane (APTES)-modified ITO-glass, which we ascribe to the modification of formation kinetics. The obtained microcrystals exhibit an orthorhombic structure. A green photoluminescence (PL) emission is revealed from the CsPbBr3 microrods. Contact angle measurements, Fourier-transform infrared and PL spectroscopies confirmed that APTES linked successfully to the ITO-glass substrate. We propose a qualitative mechanism to explain the anisotropic growth. The microrods exhibited improved PL and a slower PL lifetime compared to the microcubes, likely due to the diminished occurrence of defects. This work demonstrates the importance of the substrate surface to control the growth of perovskite single crystals and to boost the radiative recombination in view of high-performance optoelectronic devices.

Recent advances in artificial neuromorphic applications based on perovskite composites

High-performance perovskite materials with excellent physical, electronic, and optical properties play a significant role in artificial neuromorphic devices. However, the development of perovskites in microelectronics is inevitably hindered by their intrinsic non-ideal properties, such as high defect density, environmental sensitivity, and toxicity. By leveraging materials engineering, integrating various materials with perovskites to leverage their mutual strengths presents great potential to enhance ion migration, energy level alignment, photoresponsivity, and surface passivation, thereby advancing optoelectronic and neuromorphic device development. This review initially provides an overview of perovskite materials across different dimensions, highlighting their physical properties and detailing their applications and metrics in two- and three-terminal devices. Subsequently, we comprehensively summarize the application of perovskites in combination with other materials, including organics, nanomaterials, oxides, ferroelectrics, and crystalline porous materials (CPMs), to develop advanced devices such as memristors, transistors, photodetectors, sensors, light-emitting diodes (LEDs), and artificial neuromorphic systems. Lastly, we outline the challenges and future research directions in synthesizing perovskite composites for neuromorphic devices. Through the review and analysis, we aim to broaden the utilization of perovskites and their composites in neuromorphic research, offering new insights and approaches for grasping the intricate physical working mechanisms and functionalities of perovskites.

Aromatic 2,2-Diphenylethylamine Ligand Exchange of FA0.9Cs0.1PbBr3 Perovskite Nanocrystals for High-Efficiency Pure Green Light-Emitting Diodes

Perovskite nanocrystals (NCs) with long alkyl ligands cannot easily form high-quality composite films owing to their poor dispersibility in π-conjugated small molecules and polymer host materials. In this study, we demonstrated that the aromatic ligand exchange of mixed-cation FA0.9Cs0.1PbBr3 NCs using 2,2-diphenylethylamine (DPEA) can not only enable the fabrication of high-efficiency light-emitting diodes (LEDs) but also allows dispersibility in host materials. The DPEA-NC film exhibited a pure green wavelength of 530 nm and a full width at half-maximum of 20.9 nm with a photoluminescence quantum yield of 90.9%. A DPEA-NC LED achieved a luminance of 39,700 cd/m2 and an external quantum efficiency of 18.6% even in a thick NC film. Interestingly, the DPEA-NCs formed a composite film with small-molecule tris(4-carbazoyl-9-ylphenyl)amine. The operational stability of this composite LED was eight times higher than that of the DPEA-NC LED owing to enhanced hole-electron charge balance and the suppression of perovskite NC degradation. Therefore, the aromatic DPEA ligand exchange of perovskite NCs is an effective way to improve their electrical properties and operational device stabilities.

Growth mechanism of oleylammonium-based tin and lead bromide perovskite nanostructures

Metal halide perovskites, particularly using tin and lead as bivalent cations, are well known for their synthetic versatility and ion mobility. These materials possess intriguing ionic properties that allow the formation of 2D Ruddlesden-Popper (RP) and 3D metal halide perovskite nanocrystals (NCs) under similar synthetic conditions. We studied the synthesis mechanism of oleylammonium-based Sn and Pb bromide perovskites 2D Ruddlesden-Popper (RP) in comparison with the 3D CsPbBr3 and CsSnBr3 NCs. Using experimental techniques in combination with theoretical calculations, we studied the interactions of the long-chain organic cations with the inorganic layers and between each other to assess their stability. Our findings suggest that tin bromide is more inclined toward forming higher-order RP phases or 3D NCs than lead bromide. Furthermore, we demonstrate the synthesis of precisely tuned CsSnBr3 3D NCs (7 and 10 nm) using standard surface ligands. When the 3D and 2D tin halide perovskite nanostructures coexist in suspension, the obtained drop-cast thin films showed the preferential positioning of residual RP nanostructures at the interface with the substrate. This study encourages further exploration of low-dimensional hybrid materials and emphasizes the need for understanding mechanisms to develop efficient synthetic routes for high-quality tin-halide perovskite NCs.

Ultralow-Energy-Consumption Photosynaptic Transistor Utilizing Conjugated Polymers/Perovskite Quantum Dots Nanocomposites With Ligand Density Optimization

The photosynaptic transistor stands as a promising contender for overcoming the von Neumann bottleneck in the realm of photo-communication. In this context, photonic synaptic transistors is developed through a straightforward solution process, employing an organic semiconducting polymer with pendant-naphthalene-containing side chains (PDPPNA) in combination with ligand-density-engineered CsPbBr3 perovskite quantum dots (PQDs). This fabrication approach allows the devices to emulate fundamental synaptic behaviors, encompassing excitatory postsynaptic current, paired-pulse facilitation, the transition from short-to-long-term memory, and the concept of "learning experience." Notably, the phototransistor, incorporating the blend of the PDPPNA and CsPbBr3 PQDs washed with ethyl acetate, achieved an exceptional memory ratio of 104. Simultaneously, the same device exhibited an impressive paired-pulse facilitation ratio of 223% at a moderate operating voltage of -4 V and an extraordinarily low energy consumption of 0.215 aJ at an ultralow operating voltage of -0.1 mV. Consequently, these low-voltage synaptic devices, constructed with a pendant side-chain engineering of organic semiconductors and a ligand density engineering of PQDs through a simple fabrication process, exhibit substantial potential for replicating the visual memory capabilities of the human brain.

Strongly-confined colloidal lead-halide perovskite quantum dots: from synthesis to applications

Colloidal semiconductor nanocrystals enable the realization and exploitation of quantum phenomena in a controlled manner, and can be scaled up for commercial uses. These materials have become important for a wide range of applications, from ultrahigh definition displays, to solar cells, quantum computing, bioimaging, optical communications, and many more. Over the last decade, lead-halide perovskite nanocrystals have rapidly gained prominence as efficient semiconductors. Although the majority of studies have focused on large nanocrystals in the weak- to intermediate-confinement regime, quantum dots (QDs) in the strongly-confined regime (with sizes smaller than the Bohr diameter, which ranges from 4-12 nm for lead-halide perovskites) offer unique opportunities, including polarized light emission and color-pure, stable luminescence in the region that is unattainable by perovskites with single-halide compositions. In this tutorial review, we bring together the latest insights into this emerging and rapidly growing area, focusing on the synthesis, steady-state optical properties (including exciton fine-structure splitting), and transient kinetics (including hot carrier cooling) of strongly-confined perovskite QDs. We also discuss recent advances in their applications, including single photon emission for quantum technologies, as well as light-emitting diodes. We finish with our perspectives on future challenges and opportunities for strongly-confined QDs, particularly around improving the control over monodispersity and stability, important fundamental questions on the photophysics, and paths forward to improve the performance of perovskite QDs in light-emitting diodes.

Continuous tuning of persistent luminescence wavelength by intermediate-phase engineering in inorganic crystals

Multicolor tuning of persistent luminescence has been extensively studied by deliberately integrating various luminescent units, known as activators or chromophores, into certain host compounds. However, it remains a formidable challenge to fine-tune the persistent luminescence spectra either in organic materials, such as small molecules, polymers, metal-organic complexes and carbon dots, or in doped inorganic crystals. Herein, we present a strategy to delicately control the persistent luminescence wavelength by engineering sub-bandgap donor-acceptor states in a series of single-phase Ca(Sr)ZnOS crystals. The persistent luminescence emission peak can be quasi-linearly tuned across a broad wavelength range (500-630 nm) as a function of Sr/Ca ratio, achieving a precision down to ~5 nm. Theoretical calculations reveal that the persistent luminescence wavelength fine-tuning stems from constantly lowered donor levels accompanying the modified band structure by Sr alloying. Besides, our experimental results show that these crystals exhibit a high initial luminance of 5.36 cd m-2 at 5 sec after charging and a maximum persistent luminescence duration of 6 h. The superior, color-tunable persistent luminescence enables a rapid, programable patterning technique for high-throughput optical encryption.

Rashba-Type Band Splitting Effect in 2D (PEA)2PbI4 Perovskites and Its Impact on Exciton-Phonon Coupling

Despite a few recent reports on Rashba effects in two-dimensional (2D) Ruddlesden-Popper (RP) hybrid perovskites, the precise role of organic spacer cations in influencing Rashba band splitting remains unclear. Here, using a combination of temperature-dependent two-photon photoluminescence (2PPL) and time-resolved photoluminescence spectroscopy, alongside density functional theory (DFT) calculations, we contribute to significant insights into the Rashba band splitting found for 2D RP hybrid perovskites. The results demonstrate that the polarity of the organic spacer cation is crucial in inducing structural distortions that lead to Rashba-type band splitting. Our investigations show that the intricate details of the Rashba band splitting occur for organic cations with low polarity but not for more polar ones. Furthermore, we have observed stronger exciton-phonon interactions due to the Rashba-type band splitting effect. These findings clarify the importance of selecting appropriate organic spacer cations to manipulate the electronic properties of 2D perovskites.

Ultrasound-assisted nucleation and growth of hydroxyl-protected and ligand-free Cs3Cu2X5 nanocrystals with bright luminescence

The commercial applications of lead halide perovskites are hindered by their negative environmental impact and inherent instability. Consequently, developing environmentally friendly copper-based perovskite materials is crucial for future solid-state lighting and display applications. In this study, an ultrafast high-power ultrasonic synthesis strategy was utilized to achieve uniform nucleation and growth of Cs3Cu2X5 (X = Cl, Br, I) nanocrystals (NCs) that possess remarkable luminescence properties, hydroxyl protection, and ligand-free characteristics. These Cs3Cu2X5 NCs exhibited a tunable spectral range spanning from 446 to 525 nm, accompanied by photoluminescence quantum yields (PLQYs) varying from 0.2% to 79.2%. The spectral attributes of the NCs were effectively controlled by modulating the halide type and composition. It is worth noting that density functional theory (DFT) calculations offer valuable insights into the synthesis of NCs and the selection of suitable alcohol solvents. Moreover, we successfully fabricated an efficient and stable white light-emitting diode (WLED) with a high luminous efficiency of 23 lm W-1 and CIE color coordinates of (0.3266, 0.3487). Our work provides a new strategy to synthesize Cs3Cu2X5 NCs and holds promise for their potential application in display and lighting devices.

Cesium lead bromide perovskite nanocrystals synthesized via supersaturated recrystallization at room temperature: comparison of one-step and two-step processes

Over more than a decade, lead halide perovskites (LHPs) have been popular as a next-generation semiconductor for optoelectronics. Later, all-inorganic CsPbX3 (X = Cl, Br, and I) nanocrystals (NCs) were synthesized via supersaturated recrystallization (SR) at room temperature (RT). However, compared to the hot injection (HI) method, the formation mechanism of NCs via SR-RT has not been well studied. Hence, this study will contribute to elucidating SR-RT based on the LaMer model and Hansen solubility parameter. Herein, we also demonstrate the entropy-driven mixing between two dissimilar polar-nonpolar (DMF-toluene) solvents. Next, we find that, in a poor solvent (toluene ≫ DMF in volume), ∼60 nm sized CsPbBr3 NCs were synthesized in one step, whereas in a marginal solvent (toluene ≈ DMF), ∼3.5 nm sized NCs were synthesized in two steps, indicating the importance of solvent polarity, specifically the 'solubility parameter'. In addition, in the presence of a CuBr2 additive, high-quality cubic NCs (with ∼3.8 nm and ∼21.4 nm edge sizes) were synthesized. Hence, through this study, we present a 'solubility parameter-based nanocrystal-size control model' for SR-RT processes.

Near-unity quantum yield and long-term emission stability in halide perovskite nanocrystal glass composite

Metal halide perovskites are promising optoelectronic materials due to their outstanding luminescent properties. However, the instability of perovskites has long been the bottleneck to their practical applications. Here Cs4PbBr6 nanocrystals based glass composite (Cs4PbBr6 NCs@glass) are successfully prepared, which displays green emission color (520 nm), narrow bandwidth (23 nm) and a near-unity photoluminescence quantum yield (PLQY). The H2O molecules permeating in the lattice of Cs4PbBr6 were found to be a crucial role in the subband energy emission. The Cs4PbBr6 NCs@glass has excellent emission stability; maintains 93 % of initial PL intensity after ultraviolet light irradiation for over 5000 h. In addition, by adjusting the halogen content, we have achieved tunable emission color from blue (450 nm) to green (520 nm) and red (670 nm) on Cs4PbX6 NCs@glass (X = Cl, Br, I), which covers up to 127 % of the National Television Systems Board (NTSC) standard system. Our finding indicates the commercial applications of perovskite materials in lighting and display.

Thermal management towards ultra-bright and stable perovskite nanocrystal-based pure red light-emitting diodes

Despite the promising candidacy of perovskite nanocrystals for light-emitting diodes, their pure red electroluminescence is hindered by low saturated luminance, severe external quantum efficiency roll-off, and inferior operational stability. Here, we report ultra-bright and stable pure red light-emitting diodes by manipulating Joule heat generation in the nanocrystal emissive layer and thermal management within the device. Diphenylphosphoryl azide-mediated regulation of the nanocrystal surface synergistically enhances the optical properties and carrier transport of the emissive layer, enabling reduced Joule heat generation and thus lowering the working temperature. These merits inhibit ion migration of the CsPb(Br/I)3 nanocrystal film, promising excellent spectra stability. Combined with the highly thermal-conductive sapphire substrates and implementation of pulse-driving mode, the pure red light-emitting diodes exhibit an ultra-bright luminance of 390,000 cd m-2, a peak external quantum efficiency of 25%, suppressed efficiency roll-off, an operational half-life of 20 hours, and superior spectral stability within 15 A cm-2.

Highly Stable CsPbBr3@MoS2 Nanostructures: Synthesis and Optoelectronic Properties Toward Implementation into Solar Cells

Halide perovskites (HPs) have gained significant interest in the scientific and technological sectors due to their unique optical, catalytic, and electrical characteristics. However, the HPs are prone to decomposition when exposed to air, oxygen, or heat. The instability of HP materials limits their commercialization, prompting significant efforts to address and overcome these limitations. Transition metal dichalcogenides, such as MoS2, are chemically stable and are suitable for electronic, optical, and catalytic applications. Moreover, it can be used as a protective media or shell for other nanoparticles. In this study, a novel CsPbBr3@MoS2 core-shell nanostructure (CS-NS) is successfully synthesized by enveloping CsPbBr3 within a MoS2 shell for the first time. Significant stability of CS-NSs dispersed in polar solvents for extended periods is also demonstrated. Remarkably, the hybrid CS-NS exhibits an absorption of MoS2 and quenching of the HP's photoluminescence, implying potential charge or energy transfer from HPs to MoS2. Using finite difference time domain simulations, it is found that the CS-NSs can be utilized to produce efficient solar cells. The addition of a MoS2 shell enhances the performance of CS-NS-based solar cells by 220% compared to their CsPbBr3 counterparts. The innovative CS-NS represents important progress in harnessing HPs for photovoltaic and optoelectronic applications.

Solid-State Anion Exchange Enabled by Pluggable vdW Assembly for In Situ Halide Manipulation in Perovskite Monocrystalline Film

The fabrication of perovskite single crystal-based optoelectronics with improved performance is largely hindered by limited processing techniques. Particularly, the local halide composition manipulation, which dominates the bandgap and thus the formation of heterostructures and emission of multiple-wavelength light, is realized via prevalent liquid- or gas-phase anion exchange with the utilization of lithography, while the monocrystalline nature is sacrificed due to polycrystalline transition in exchange with massive defects emerging, impeding carrier separation and transportation. Thus, a damage-free and lithography-free solid-state anion exchange strategy, aiming at in situ halide manipulation in perovskite monocrystalline film, is developed. Typically, CsPbCl3 working as medium to deliver halide is van der Waals (vdW) assembled to specific spots of CsPbBr3, followed by the removal of CsPbCl3 after anion exchange, with the halide composition in contact area modulated and monocrystalline nature of CsPbBr3 preserved. CsPbBr3-CsPbBrxCl3-x monocrystalline heterostructure has been achieved without lithography. Device based on the heterostructure shows apparent rectification behavior and improved photo-response rate. Heterostructure arrays can also be constructed with customized medium crystal. Furthermore, the halide composition can be accurately tuned to enable full coverage of visible spectra. The solid-state exchange enriches the toolbox for processing vulnerable perovskite and paves the way for the integration of monocrystalline perovskite optoelectronics.

Linearly Polarized Broadband Emission and Multiwavelength Lasing in Solution-Processed Quantum Dots

A miniature laser with linear polarization is a long sought-after component of photonic integrated circuits. In particular, for multiwavelength polarization lasers, it supports simultaneous access to multiple, widely varying laser wavelengths in a small spatial region, which is of great significance for advancing applications such as optical computing, optical storage, and optical sensing. However, there is a trade-off between the size of small-scale lasers and laser performance, and multiwavelength co-gain of laser media and multicavity micromachining in the process of laser miniaturization remain as significant challenges. Herein, room-temperature linearly polarized multiwavelength lasers in the visible and near-infrared wavelength ranges are demonstrated, by fabricating random cavities scattered with silica in an Er-doped Cs2Ag0.4Na0.6In0.98Bi0.02Cl6 double-perovskite quantum dots gain membrane. By regulating the local symmetry and enabling effective energy transfer in nanocrystals, multiwavelength lasers with ultralow thresholds are achieved at room temperature. The maximum degree of polarization reaches 0.89. With their advantages in terms of miniaturization, ultralow power consumption, and adaptability for integration, these lasers offer a prospective light source for future photonic integrated circuits aimed at high-capacity optical applications.

Tunable Emissive CsPbBr3/Cs4PbBr6 Quantum Dots Engineered by Discrete Phase Transformation for Enhanced Photogating in Field-Effect Phototransistors

Precise control of quantum structures in hybrid nanocrystals requires advancements in scientific methodologies. Here, on the design of tunable CsPbBr3/Cs4PbBr6 quantum dots are reported by developing a unique discrete phase transformation approach in Cs4PbBr6 nanocrystals. Unlike conventional hybrid systems that emit solely in the green region, this current strategy produces adjustable luminescence in the blue (450 nm), cyan (480 nm), and green (510 nm) regions with high photoluminescence quantum yields up to 45%, 60%, and 85%, respectively. Concentration-dependent studies reveal that phase transformation mechanisms and the factors that drive CsBr removal occur at lower dilutions while the dissolution-recrystallization process dominates at higher dilutions. When the polymer-CsPbBr3/Cs4PbBr6 integrated into a field-effected transistor the resulting phototransistors featured enhanced photosensitivity exceeding 105, being the highest reported for an n-type phototransistor, while maintaining good transistor performances as compared to devices consisting of polymer-CsPbBr3 NCs.

High Stability and Corrosion-Resistant Gas of Recyclable and Versatile Manganese-Doped Lead-Free Double Perovskite Crystals toward Novel Functional Fabric and Photoelectric Device

Lead-free halide perovskites possess excellent photoelectric properties, making them widely used in the photoelectric fields. Herein, lead-free double perovskite crystals (PCs) doped with manganese (Cs2NaInCl6:Mn2+) are successfully prepared by the more energy-efficient crystallization method. The crystals emit bright orange-red light under the ultraviolet (UV) lamp, showing unique optical properties. They have the highest photoluminescence quantum yield of 42.91%. The white light-emitting diodes (LEDs) are fabricated using these perovskite crystals, which show a color rendering index of 92 and external quantum efficiency (EQE) as high as 16.3%. Furtherly, perovskite-modified fiber paper made of aramid chopped fibers (ACFs) and polyphenylene sulfide (PPS) exhibited fluorescent properties under different conditions. This paper combines fiber composite technology with PPS fiber filter bags, which are widely used in environmental protection, for the first time and demonstrates functional fiber filter bags with fluorescent characteristics. This filter bag provides an idea for the automatic detection of industrial filtration. Meanwhile, after being exposed to industrial waste gas for 60 h, the filter bag can maintain superior fluorescence performance. In this study, lead-free double perovskites are synthesized using an efficient method for preparing high-performance LEDs and high-stability fluorescent fibers. Concurrently, the application of perovskites in environmental protection is expanded.