Electrogenerated chemiluminescence from PbS quantum dots

One-Dimensional Covalent Organic Framework with Improved Charge Transfer for Enhanced Electrochemiluminescence

We present a dimensional regulating charge transfer strategy to achieve an enhanced electrochemiluminescence (ECL) by constructing a one-dimensional pyrene-based covalent organic framework (1D-COF). The dual-chain-like edge architecture in 1D-COF facilitates the stabilization of aromatic backbones, the enhancement of electronic conjugations, and the decrease of energy loss. The 1D-COF generates enhanced anodic (92.5-fold) and cathodic (3.2-fold) signals with tripropylamine (TPrA) and K2S2O8 as the anodic and cathodic coreactants, respectively, compared with 2D-COF. The anodic and cathodic ECL efficiencies of 1D-COF are 2.08- and 3.08-fold higher than those of 2D-COF, respectively. According to density functional theory (DFT), the rotational barrier energy (ΔE) of 1D-COF enhances sharply with the increase of dihedral angle, suggesting that the architecture in 1D-COF restrains the intramolecular spin of aromatic chains, which facilitates the decrease of nonradiative transitions and the enhancement of ECL. Furthermore, 1D-COF can be used to construct an ECL biosensor for sensitive detection of dopamine.

Potential-selective electrochemiluminescence of AgInS2/ZnS nanocrystals and its immunoassay application

Potential-selective electrochemiluminescence (ECL) with tunable maximum-emission-potential ranging from 0.95 to 0.30 V is achieved using AgInS2/ZnS nanocrystals, which is promising in the design of multiplexed bioassay on commercialized ECL setups. The model system AgInS2/ZnS/N2H4 exhibits efficient ECL around 0.30 V and can be exploited for sensitive immunoassays with less electrochemical interference and crosstalk.

Low-Triggering-Potential and Narrow-Potential-Window Electrochemiluminescence of Silver Nanoclusters for Gene Assay

A low-triggering potential and a narrow-potential window are anticipated to decrease the electrochemical interference and cross talk of electrochemiluminescence (ECL). Herein, by exploiting the low oxidative potential (0.82 V vs Ag/AgCl) of dihydrolipoic acid-capped sliver nanoclusters (DHLA-AgNCs), a coreactant ECL system of DHLA-AgNCs/hydrazine (N2H4) is proposed to achieve efficient and oxidative-reduction ECL with a low-triggering potential of 0.82 V (vs Ag/AgCl) and a narrow-potential window of 0.22 V. The low-triggering-potential and narrow-potential-window nature of ECL can be primarily preserved upon labeling DHLA-AgNCs to probe DNA and immobilizing DHLA-AgNCs onto the Au surface via sandwiched hybridization, which eventually enables a selective ECL strategy for the gene assay at +0.82 V. This gene assay strategy can sensitively determine the gene of human papillomavirus from 10 to 1000 pM with a low limit of detection of 5 pM (S/N = 3) and would open a way to improve the applied ECL bioassay.

Rapid and sensitive electrochemiluminescence detection using easily fabricated sensor with an integrated two-electrode system

The electrochemiluminescence (ECL) behavior of a tri(2,2'-bipyridyl)ruthenium(ii) (Ru(bpy)32+)/tripropylamine (TPrA) system was investigated in sensor chips with two kinds of integrated two-electrode systems, which included screen-printed electrodes (SPE) and physical vapor deposition (PVD) electrodes. Firstly, under excitation with an optimal transient potential (TP) within 100 ms, the ECL assay could be carried out on the microchips using an Au & Au electrode system, emitting strong and stable light signal. Secondly, on the PVD chip, the ECL intensity initiated by optimal TP was eight times stronger than the peak light signal emitted by the linear sweep voltammetry model. Finally, the logarithmic ECL intensities exhibited a linear increase with the logarithmic concentrations of Ru(bpy)32+ in both the SPE and PVD chips without any reference electrode (RE). Typically, the integration of an interdigital two-electrode system in the microchip significantly enhanced the ECL sensitivity of Ru(bpy)32+ because the large relative area between the working electrode (WE) and counter electrode (CE) achieved a highly efficient mass transfer. This improvement enabled the establishment of a reliable linear relationship across a wide concentration range, spanning from 1 pM to 1 μM (R2 = 0.998). Therefore, the exceptional ECL response of the Ru(bpy)32+/TPrA system on microfluidic chips using a two-electrode system and the TP excitation model has been demonstrated. This suggests that ECL chips without a RE have broad potential for the rapid and sensitive detection of multiple targets.

Electrochemiluminescence of Semiconductor Quantum Dots and Its Biosensing Applications: A Comprehensive Review

Electrochemiluminescence (ECL) is the chemiluminescence triggered by electrochemical reactions. Due to the unique excitation mode and inherent low background, ECL has been a powerful analytical technique to be widely used in biosensing and imaging. As an emerging ECL luminophore, semiconductor quantum dots (QDs) have apparent advantages over traditional molecular luminophores in terms of luminescence efficiency and signal modulation ability. Therefore, the development of an efficient ECL system with QDs as luminophores is of great significance to improve the sensitivity and detection flux of ECL biosensors. In this review, we give a comprehensive summary of recent advances in ECL using semiconductor QDs as luminophores. The luminescence process and ECL mechanism of semiconductor QDs with various coreactants are discussed first. Specifically, the influence of surface defects on ECL performance of semiconductor QDs is emphasized and several typical ECL enhancement strategies are summarized. Then, the applications of semiconductor QDs in ECL biosensing are overviewed, including immunoassay, nucleic acid analysis and the detection of small molecules. Finally, the challenges and prospects of semiconductor QDs as ECL luminophores in biosensing are featured.

Dual-potential encoded electrochemiluminescence for multiplexed gene assay with one luminophore as tag

Multiplexed gene assay for simultaneously detecting the multi-targets of nucleic acids is strongly anticipated for the accurate diseases diagnosis and prediction, and all commercial available gene assays for IVD are a kind of single-target assay. Herein, a dual-potential encoded and coreactant-free electrochemiluminescence (ECL) strategy is proposed for the multiplexed gene assay, which can be conveniently carried out by directly oxidizing the same luminescent tag of dual-stabilizers-capped CdTe nanocrystals (NCs). The CdTe NCs linked with sulfhydryl-RNA via Cd-S bond merely exhibits one ECL process around 0.32 V with a narrow triggering-potential-window of 0.35 V, while CdTe NCs linked with amino-RNA via amide linkage solely gives off one ECL process around 0.82 V with a narrow triggering-potential-window of 0.30 V. Multiplexing ECL of both sulfhydryl-RNA-functionalized CdTe NCs and amino-RNA-functionalized CdTe NCs can be utilized to simultaneously detect the open reading frame 1ab (ORF1ab) and the nucleoprotein (N) genes without crosstalk, in which ECL of sulfhydryl-RNA-functionalized CdTe NCs can dynamically determine ORF1ab from 200 aM to 10 fM with a limit of detection (LOD) of 100 aM, while ECL of amino-RNA-functionalized CdTe NCs can linearly detect N gene from 5 fM to 1 pM with a LOD of 2 fM. Post-engineering CdTe NCs with RNA in a labeling-bond engineering way would provide a potential-selective and encoded ECL strategy for multiplexed gene assay with one luminophore.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Designing inorganically functionalized magic-size II-VI clusters and unraveling their surface states

Surface engineering is a critical step in the functionalization of nanomaterials to improve their optical and electrochemical properties. However, this process remains a challenge in II-VI magic-size clusters (MSCs) due to their high sensitivity to the environment. Herein, we developed a general surface modification strategy to design all-inorganic MSCs by using certain metal salts (cation = Zn2+, In3+; Anion = Cl-, NO3 -, OTf-) and stabilized (CdS)34, (CdSe)34 and (ZnSe)34 MSCs in polar solvents. We further investigated the surface states of II-VI MSCs using electrochemiluminescence (ECL). The mechanism study revealed that the ECL emission was attributed to . Two ECL emissions at 556 nm and 530 nm demonstrated two surface passivation modes on (CdS)34 MSCs, which can be tuned by the surface ligands. The achievement of surface engineering opens a new design space for functional MSC compounds.

Cluster-Dominated Electrochemiluminescence of Tertiary Amines in Polyethyleneimine Nanoparticles: Mechanism Insights and Sensing Application

Designing and screening highly efficient and cost-effective luminophores have always been a challenge to develop sensitive electrochemiluminescence (ECL) biosensors. Herein, polyethyleneimine nanoparticles (PEI NPs), a kind of nonconjugated polymer (NCP) NPs with tertiary amine clusters, were developed as an ECL luminophore. Specifically, PEI NPs were synthesized by a one-step hydrothermal method using PEI and formaldehyde. The properties of PEI NPs were investigated in detail using photochemical and electrochemical techniques. The results showed cluster-dominated luminescence of tertiary amines in PEI NPs via "through-space conjugation". This non-negligible ECL performance (at 631 nm) was also verified by the initiated reduction-oxidation process. With persulfate as a coreactant, PEI NPs acted as both the luminophore and coreaction accelerator to enhance the ECL intensity remarkably, which was eightfold higher than that of isolated PEI. Moreover, choosing dopamine as the model target, a highly sensitive "signal off" ternary ECL sensor was constructed utilizing PEI NPs as the luminophore. Dopamine could be oxidized to benzoquinone at the sensing interface, quenching the signal via ECL energy transfer. Free from any signal amplification, the proposed sensor achieved a low detection limit (4.3 nM) for target monitoring with good selectivity and stability. This strategy not only provides a unique perspective for designing novel efficient and facile ECL luminophores of tertiary amines but also broadens the biological application of NCP NPs.

MXene-Derived Quantum Dot@Gold Nanobones Heterostructure-Based Electrochemiluminescence Sensor for Triple-Negative Breast Cancer Diagnosis

MXene material has been gradually studied in recent years due to its fascinating characteristics. This work developed a novel MXene-derived quantum dots (MQDs) @gold nanobones (Au NBs) heterostructure as the electrochemiluminescence (ECL) sensor. First, MXene and MQDs were synthesized via the green preparation process, which avoided the harm of hydrofluoric acid to humans and the environment. There was a strong ECL signal enhancement in the MQD@Au NBs heterostructure. On the one hand, Au NBs with surface plasmon resonance (SPR) effect acted as an "electronic regulator" that can transfer electrons to itself to control over-injection of electrons into the conduction band of MQDs. The luminous signal of MQDs can be efficiently generated and significantly amplified in the ECL sensing process. On the other hand, the work function of MQDs with excellent conductivity was relatively close to that of Au NBs in the heterostructure. So, ECL quenching caused by short-distance electron transfer between luminophore and Au nanomaterial has been effectively suppressed. The MQD@Au NBs heterostructure-based ECL sensing system was applied to determine miRNA-26a in the serum of patients with triple-negative breast cancer. It not only provides ideas for the green synthesis of MXene but also provides a guide for the application of MQD@Au NBs heterostructure in the field of ECL sensing.

Targeted Nanoscale 3D Thermal Imaging of Tumor Cell Surface with Functionalized Quantum Dots

Measuring the changes in tumor cell surface temperature can provide insights into cellular metabolism and pathological features, which is significant for targeted chemotherapy and hyperthermic therapy. However, conventional micro-nano scale methods are invasive and can only measure the temperature of cells across a single plane, which excludes specific organelles. In this study, fluorescence quantum dots (QDs) are functionalized with the membrane transport protein transferrin (Tf) as a thermo-sensor specific for tumor cell membrane. The covalent conjugation is optimized to maintain the relative fluorescence intensity of the Tf-QDs to >90%. In addition, the Tf-QDs undergo changes in the fluorescence spectra as a function of temperature, underscoring its thermo-sensor function. Double helix point spread function imaging optical path is designed to locate the probe at nanoscale, and 3D thermal imaging technology is proposed to measure the local temperature distribution and direction of heat flux on the tumor cell surface. This novel targeted nanoscale 3D thermometry method can be a highly promising tool for measuring the local and global temperature distribution across intracellular organelles.

Low-Triggering-Potential Electrochemiluminescence from Surface-Confined CuInS2@ZnS Nanocrystals and their Biosensing Applications

Electrochemiluminescence (ECL) of low triggering potential is strongly anticipated for ECL assays with less inherent electrochemical interference and improved long-term stability of the working electrode. Herein, effects of the thiol capping agents and the states of luminophores, i.e., the thiol-capped CuInS₂@ZnS nanocrystals (CuInS₂@ZnS-Thiol), on the ECL triggering potential of CuInS₂@ZnS-Thiol/N₂H₄·H₂O were explored on the Au working electrode. The thiol capping agent of glutathione (GSH) not only enabled CuInS₂@ZnS-Thiol/N₂H₄·H₂O with the stronger oxidative-reduction ECL than other thiol capping agents but also demonstrated the largest shift for the ECL triggering potential of CuInS₂@ZnS-Thiol/N₂H₄·H₂O upon changing the luminophores from the monodispersed state to the surface-confined state. CuInS₂@ZnS-GSH/N₂H₄·H₂O exhibited an efficient oxidative-reduction ECL around 0.78 V (vs Ag/AgCl) with CuInS₂@ZnS-GSH of the monodispersed state. Upon employing CuInS₂@ZnS-GSH as the ECL tag and immobilizing them onto the Au working electrode, the oxidative-reduction ECL of CuInS₂@ZnS-GSH/N₂H₄·H₂O was lowered to 0.32 V (vs Ag/AgCl), which was about 0.88 V lower than that of traditional Ru(bpy)₃²⁺/TPrA (typically ∼1.2 V, vs Ag/AgCl). The ECL of the CuInS₂@ZnS-GSH/N₂H₄·H₂O system with the luminophore of both monodispersed and surface-confined states was spectrally identical to each other, indicating that this surface-confining strategy exhibited negligible effect on the excited state for the ECL of CuInS₂@ZnS-GSH. A surface-confined ECL sensor around 0.32 V was fabricated with CuInS₂@ZnS-GSH as a luminophore, which could sensitively and selectively determine the K-RAS gene from 1 to 500 pM with a limit of detection at 0.5 pmol L^-1 (S/N = 3).

Enhanced Near-Infrared Electrochemiluminescence from Trinary Ag-In-S to Multinary Ag-Ga-In-S Nanocrystals via Doping-in-Growth and Its Immunosensing Applications

Screening toxic-element-free and biocompatible electrochemiluminophores was crucial for electrochemiluminescence (ECL) evolution. Herein, l-glutathione (GSH)-capped Ag-Ga-In-S (AGIS) nanocrystals (NCs) were prepared by doping Ag-In-S (AIS) NCs in a doping-in-growth way and utilized as a model for both ECL modulating and developing multinary NC-based electrochemiluminophores with enhanced ECL performance than trinary NCs. AGIS NCs not only primarily preserved the morphology, size, phase structure, and water monodisperse characteristics of AIS NCs with broadened band gap but also demonstrated obviously enhanced oxidative-reduction ECL than AIS NCs. Importantly, ECL of AGIS NCs was located at the near-infrared region with a maximum emission wavelength of 744 nm and could be utilized for an ECL immunoassay with human prostate-specific antigen (PSA) as a model, which exhibited a linearity range from 0.05 pg/mL to 1.0 ng/mL and a low limit of detection of 0.01 pg/mL (S/N = 3). This work provided a promising alternative to the traditional binary NCs for developing toxic-element-free and biocompatible electrochemiluminophores with efficient near-infrared ECL.

Electrochemiluminescence from the Graphene- and Fullerene-Like Nanostructures of Glassy Carbon Microspheres and Its Application in Immunoassay

Glassy carbon (GC) as a well-known electrode material has recently been proposed to consist of fullerene-like nanostructures. In order to verify the nanostructures in GC, find more physiochemical properties of GC, and develop sensors based on GC-related carbon nanomaterials, we investigated the morphologies and surface states of GC microspheres (GCMs) and their HNO₃-oxidized products (ox-GCMs) with scanning electron microscopy (SEM), electrochemiluminescence (ECL), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electron-paramagnetic resonance (EPR) spectroscopy. Our research results reveal that ox-GCMs rather than raw GCMs have abundant surface states, including many carboxyl groups (-COOH), surface defects (or carbon edges), and C-related dandling bonds. The surface states with a band gap of 2.14 eV endow ox-GCMs with strong cathodic ECL activity in the presence of peroxydisulfate (S₂O₈^2-). The ECL behaviors and maximum emission wavelength (580 nm) of ox-GCMs are very similar to those of small-sized graphene quantum dots and fullerene-like nanosheets, verifying that GCMs are essentially 3-D nanomaterials consisting of graphene or fullerene-like carbon nanostructures. It is for the first time that a microsized carbon material was reported to have good ECL activity in aqueous media. Possible mechanisms for surface state formation and ECL reactions are proposed for ox-GCMs, and a promising application of ox-GCMs in ECL immunosensing has been demonstrated by determining prostate specific antigen (PSA) as a model cancer biomarker.

Activated Protein Kinase C (PKC) Is Persistently Trafficked with Epidermal Growth Factor (EGF) Receptor

Protein kinase Cs (PKCs) are activated by lipids in the plasma membrane and bind to a scaffold assembled on the epidermal growth factor (EGF) receptor (EGFR). Understanding how this complex is routed is important, because this determines whether EGFR is degraded, terminating signaling. Here, cells were preincubated in EGF-tagged gold nanoparticles, then allowed to internalize them in the presence or absence of a phorbol ester PKC activator. PKC colocalized with EGF-tagged nanoparticles within 5 min and migrated with EGFR-bearing vesicles into the cell. Two conformations of PKC-epsilon were distinguished by different primary antibodies. One, thought to be enzymatically active, was on endosomes and displayed a binding site for antibody RR (R&D). The other, recognized by Genetex green (GG), was soluble, on actin-rich structures, and loosely bound to vesicles. During a 15-min chase, EGF-tagged nanoparticles entered large, perinuclear structures. In phorbol ester-treated cells, vesicles bearing EGF-tagged nanoparticles tended to enter this endocytic recycling compartment (ERC) without the GG form. The correlation coefficient between the GG (inactive) and RR conformations on vesicles was also lower. Thus, active PKC has a Charon-like function, ferrying vesicles to the ERC, and inactivation counteracts this function. The advantage conferred on cells by aggregating vesicles in the ERC is unclear.

Fabrication and comparison of Heterojunction solar cells from CdS/PbS nanoparticles and CdS/PbS bulk

PbS nanoparticles and CdS nanoparticles are grown by chemical methods. Also bulk PbS is grown by simple chemical methods without using any capping agent. The material formation is identified from XRD.TEM image shows the formation of different shaped PbS nanoparticles, CdS nanoparticles, and bulk PbS. Three different heterojunction solar cells are fabricated by CdS and PbS samples using a spin coating technique. Finally, gold is evaporated on PbS film. Current-voltage characteristics data for three heterojunction solar cells are taken under dark and illumination conditions. For each fabricated solar cell open-circuit voltage (VOC), short circuit current density (ISC), fill factor (FF), and power conversion efficiency( ῃ ) are measured. Finally, a comparison of the characteristics is done for different fabricated heterojunction solar cells.

Fe3O4 NP@ZIF-8/MoS2 QD-based electrochemiluminescence with nanosurface energy transfer strategy for point-of-care determination of ATP

Herein, Fe₃O₄ NP@ZIF-8/MoS₂ QD-based electrochemiluminescence (ECL) biosensor with nanosurface energy transfer strategy was successfully developed for point-of-care determination of ATP. With the porous structure and poor electron transfer ability, Fe₃O₄ NP@ZIF-8 complex was first used as an excellent catalyst in ECL. The complex catalyzed the coreactant for more free radicals and hindered the quenching effect of Fe₃O₄ nanoparticles (NPs) on quantum dots (QDs). In ECL-nanosurface energy transfer (NSET) system, through the specific binding of complementary DNA linked to MoS₂ QDs (QDs-cDNA) and aptamer linked to Au NPs, interaction between the point dipole of MoS₂ QDs and the collective dipoles of Au NPs quenched ECL signal. When ATP was captured by aptamer, the ECL-NSET system was taken apart, which resulted in the recovery of ECL signal. Moreover, changes of the ECL imaging can be captured by a smartphone, which enabled point-of-care determination of ATP from 0.05 nmol L^-1 to 200 nmol L^-1 with LOD of 0.015 nmol L^-1. With superior specificity and stability, the sensing system showed significant potential about the application of catalysts coated with ZIF and NSET in point-of-care ECL determination.

Electrogenerated Chemiluminescence and Spectroelectrochemistry Characteristics of Blue Photoluminescence Perovskite Quantum Dots

Lead-based perovskite MAPbX₃ (MA = CH₃NH₃, X = Cl and Br) has shown great potential benefits to advance modern optoelectronics and clean energy harvesting devices. Poor structural stability is one of the major challenges of MAPbX₃ perovskite materials to overcome to achieve desired device performance. Here, we present the electrochemical stability study of CH₃NH₃PbCl_1.08Br_1.92 quantum dots (QDs) by electrogenerated chemiluminescence (ECL) and photoluminescence (PL) spectroelectrochemistry methods. Electrochemical anodization of pristine MAPbX₃ QD film results in the disproportionate loss of methylammonium and halide ions (X = Cl and Br). ECL efficiency and stability of perovskite QDs in the presence of coreactant tripropyl amine (TPrA) can be greatly improved after being incorporated into a polystyrene (PS) matrix. Mass spectrum and X-ray photoelectron spectroscopy (XPS) measurements were used to provide chemical composition variation details of QDs, which are responsible for the ECL and PL characteristics (e.g., wavelength redshift) of perovskite QDs in an electrochemical cell.

Size-selected and surface-passivated CsPbBr3 perovskite nanocrystals for self-enhanced electrochemiluminescence in aqueous media

In this work, CsPbBr3 perovskite nanocrystals (NCs) synthesized via a ligand-assisted reprecipitation method (LCPB) were discovered to emit self-enhanced electrochemiluminescence (ECL) with the surface oleylamine as both a coreactant and a stabilizer. Solvent regulation and tri-n-octylphosphine post-treatment were manipulated for size-selected and surface-passivated LCPBs, which showed remarkable aqueous ECL performance with respect to efficiency and stability. Furthermore, thanks to the self-enhancement mode with a shorter charge transfer pathway and less energy loss, the ECL efficiency obtained for these as-synthesized LCPBs in aqueous solution without any additional coreactant was up to 57.08% using the Ru(bpy)32+-tripropylamine system as the standard. As a proof-of-concept, the products were successfully employed for the bioanalyses of hydrogen peroxide, ascorbic acid, and cancer cells based on inhibition, coreaction, and impedance detection principles, respectively. More importantly, the basic properties of LCPBs in aqueous media including surface chemistry, charge transfer process, and ECL mechanism were studied systematically. Such efforts are aimed at perfecting the fundamental research of all-inorganic perovskite NCs and opening an avenue for the design of highly crystalline and luminescent perovskites as advanced ECL emitters for applications in the ECL domain.

Electrochemically Lighting Up Luminophores at Similar Low Triggering Potentials with Mechanistic Insights

Electrochemiluminescence (ECL) with high electrode compatibility and less electrochemical interference has conventionally been envisioned by lowering the oxidative potential of luminophores and/or screening luminophores with a low oxidative potential. Herein, an alternative was developed by employing the environmental-friendly carbohydrazide as a coreactant, which enabled serial luminophores with oxidative-reduction ECL at one similar low triggering potential around 0.55 V versus Ag/AgCl, including Ru(bpy)₃²⁺ as well as CdTe, CdSe, CuInS₂/ZnS, and Au nanocrystals. Because the eight-electron releasing process of carbohydrazide was electrochemically triggered at ∼0.25 V versus Ag/AgCl, the radicals generated via electrochemical oxidation of carbohydrazide could reduce the luminophores at a much lower potential than those of traditional coreactants. All the luminophore/carbohydrazide systems exhibited one ECL process around 0.55 V, which was about 0.65 V lower than that of a traditional Ru(bpy)₃²⁺/tri-n-propylamine system (typically around +1.2 V), and even lower than the oxidative potential of some luminophores. The ECL of the luminophore/carbohydrazide system was spectrally close to that of the corresponding luminophore/tri-n-propylamine system; the maximum emission wavelength of the low triggering potential ECL could shift from 540 to 783 nm via the selection of luminophores in this case. The coreactant screening strategy would be a favorable addition to the expected luminophore screening strategy for achieving enhanced ECL performance. This work created an avenue toward a deeper understanding of the ECL mechanism.

A visual electrochemiluminescence biosensor based on CuInZnS quantum dots for superoxide dismutase detection

Superoxide dismutase (SOD), also known as liver protein, is a substance widely distributed in various biological cells. It has the function of catalyzing the disproportionation reaction of superoxide free radicals. SOD can form an antioxidant chain together with peroxidase, catalase, and other substances in the body of organisms, and thus, is one of the indispensable important substances in the body of organisms. In this work, we provided a simple and fast visual electrochemiluminescence (ECL) sensor for SOD detection. CuInZnS quantum dots (QDs) worked as the ECL luminophore with hydrogen peroxide as co-reactant. In the sensing process, SOD and CuInZnS QDs on a glassy carbon electrode (GCE) competed with each other for hydrogen peroxide to produce superoxide during electrochemical luminescence, thus quenching the ECL signal of CuInZnS QDs. The proposed sensor can quantify SOD with a limit of detection (LOD) of 0.03 μg/mL. In addition, the change in the CuInZnS QDs ECL signal was easily observed with a smartphone camera. The results indicated that this sensor could effectively work in the detection of SOD in human blood. Graphical abstract.

Synthesis of europium(iii)-doped copper nanoclusters for electrochemiluminescence bioanalysis

We reported an electrochemiluminescence biosensing platform based on europium(iii)-doped copper nanoclusters that exhibited excellent analytical performances of high stability and enhanced intensity.

Distance-dependent plasmon-enhanced electrochemiluminescence biosensor based on MoS2 nanosheets

Nonmetallic plasmonic MoS₂ nanosheets were synthesized by hydrothermal top-down method. MoS₂ nanosheets had shown strong surface plasmon coupling (SPC) light absorption in the visible and near-infrared region. Herein, the nonmetallic plasmonic MoS₂ nanosheets were employed to enhance the electrochemiluminescence (ECL) signal of sulfur doped boron nitrogen QDs (S-BN QDs) in this work. It is important to regulate the distance between ECL luminophore and plasmonic nanoparticles. On one hand, too closed distance can cause energy or electron transfer, which could quench the ECL intensity of nano-luminophore. On the other hand, plasmonic nanostructure cannot significantly affect the luminescence in the far distance. Therefore, we discussed the distance-dependent plasmon-enhanced ECL in detail with different length DNA chains. Furthermore, we constructed a hybridization chain reaction (HCR) amplification ECL sensing mode with the SPC-ECL strategy. The proposed DNA sensor can quantify hepatitis C virus (HCV) gene from 0.5 pmoL/L to 1 nmoL/L with a limit of detection (LOD) of 0.17 pmoL/L.

Degradability and Clearance of Inorganic Nanoparticles for Biomedical Applications

Inorganic nanoparticles with tunable and diverse properties hold tremendous potential in the field of nanomedicine, while having non-negligible toxicity concerns in healthy tissues/organs that have resulted in their restricted clinical translation to date. In the past decade, the emergence of biodegradable or clearable inorganic nanoparticles has made it possible to completely solve this long-standing conundrum. A comprehensive understanding of the design of these inorganic nanoparticles with their metabolic performance in the body is of crucial importance to advance clinical trials and expand their biological applications in disease diagnosis. Here, a diverse variety of biodegradable or clearable inorganic nanoparticles regarding considerations of the size, morphology, surface chemistry, and doping strategy are highlighted. Their pharmacokinetics, pathways of metabolism in the body, and time required for excretion are discussed. Some inorganic materials intrinsically responsive to various conditions in the tumor microenvironment are also introduced. Finally, an overview of the encountered challenges is provided along with an outlook for applying these inorganic nanoparticles toward future clinical translations.

Synergistically mediated enhancement of cathodic and anodic electrochemiluminescence of graphene quantum dots through chemical and electrochemical reactions of coreactants

A dual potential electrochemiluminescence (ECL) enhancement of graphene quantum dots is achieved through chemical and electrochemical reactions of two different coreactants.

We for the first time propose a new concept where a greater enhancement in dual potential electrochemiluminescence (ECL) of a single graphene quantum dot (GQD) emitter can be achieved through the coupling between chemical and electrochemical reactions of two different coreactants of K₂S₂O₈ and Na₂SO₃.

Promising Anodic Electrochemiluminescence of Nontoxic Core/Shell CuInS2/ZnS Nanocrystals in Aqueous Medium and Its Biosensing Potential

Copper indium sulfide (CuInS₂, CIS) nanocrystals (NCs) are a promising solution to the toxic issue of Cd- and Pb-based NCs. Herein, electrochemiluminescence (ECL) of CIS NCs in aqueous medium is investigated for the first time with l-glutathione and sodium citrate-stabilized water-soluble CIS/ZnS NCs as model. The CIS/ZnS NCs can be oxidized to hole-injected states via electrochemically injecting holes into valence band at 0.55 and 0.94 V (vs Ag/AgCl), respectively. The hole-injected state around 0.94 V can bring out efficient oxidative-reduction ECL with a similar color to Ru(bpy)₃²⁺ in the presence of tri- n-propylamine (TPrA) and enable CIS/ZnS NCs promising ECL tags with l-glutathione as linker for labeling. The ECL of CIS/ZnS NCs/TPrA can be utilized to determine vascular endothelial growth factor (VEGF) from 0.10 to 1000 pM with the limit of detection at 0.050 pM (S/N = 3). Although the hole-injected state around 0.55 V is generated ahead of oxidation of TPrA and fails to bring out coreactant ECL, annihilation ECL proves that both hole-injected states generated, at 0.55 and 0.94 V, can be involved in electrochemical redox-induced radiative charge transfer by directly stepping CIS/ZnS NCs from electron-injecting potential to hole-injecting potential. CIS/ZnS NCs are promising nontoxic electrochemiluminophores with lowered ECL triggering potential around 0.55 V for less electrochemical interference upon the development of coreactant.

Highly Luminescent Phase-Stable CsPbI3 Perovskite Quantum Dots Achieving Near 100% Absolute Photoluminescence Quantum Yield

Perovskite quantum dots (QDs) as a new type of colloidal nanocrystals have gained significant attention for both fundamental research and commercial applications owing to their appealing optoelectronic properties and excellent chemical processability. For their wide range of potential applications, synthesizing colloidal QDs with high crystal quality is of crucial importance. However, like most common QD systems such as CdSe and PbS, those reported perovskite QDs still suffer from a certain density of trapping defects, giving rise to detrimental nonradiative recombination centers and thus quenching luminescence. In this paper, we show that a high room-temperature photoluminescence quantum yield of up to 100% can be obtained in CsPbI₃ perovskite QDs, signifying the achievement of almost complete elimination of the trapping defects. This is realized with our improved synthetic protocol that involves introducing organolead compound trioctylphosphine-PbI₂ (TOP-PbI₂) as the reactive precursor, which also leads to a significantly improved stability for the resulting CsPbI₃ QD solutions. Ultrafast kinetic analysis with time-resolved transient absorption spectroscopy evidence the negligible electron or hole-trapping pathways in our QDs, which explains such a high quantum efficiency. We expect the successful synthesis of the "ideal" perovskite QDs will exert profound influence on their applications to both QD-based light-harvesting and -emitting devices.

Signal enhancement and low oxidation potentials for miniaturized ECL biosensors via N-butyldiethanolamine

We present studies on ruthenium-based electrochemiluminescence (ECL) focusing on conditions supporting signal enhancement and low oxidation potentials. Low oxidation potentials (LOPs) are especially attractive for miniaturized ECL biosensors, as microfabricated electrodes tend to detach from their support when used with high currents and operated at high potentials. Furthermore, high potentials or current densities can lead to damage of typical biosensor surface coatings and biological probes. The possibility of generating LOP ECL signals at a potential below 900 mV was therefore studied for Ru(bpy)₃²⁺ with two typical coreactants, i.e. 2-(dibutylamino)ethanol (DBAE) and tripropylamine (TPA), as well as with the tertiary amine N-butyldiethanolamine (NBEA). Furthermore, the effect of buffer components and pH values on ECL signal generation was investigated. We could show a significant LOP ECL signal for NBEA. We found that Tris buffer, with its ability to form complexes with transition metal ions, has a positive influence on this ECL signal in terms of signal strength and LOP capabilities. Specifically, at basic pH values significant increases in ECL signals were observed at 900 mV and at 1.2 V. In fact, the ECL signal at 1.2 V was three times higher than the signal observed in phosphate buffer at a pH of 7, and it was thirty times higher than the ECL signal for TPA under these conditions. The LOP signal for NBEA in Tris buffer at pH 8.5 was similar to the signal obtained for TPA in phosphate buffer at pH 8.5 but three times higher than for TPA at pH 7.0. Interestingly, the coreactant DBAE was neither significantly influenced by the buffer system or pH nor did it present a valuable LOP ECL signal. Finally, it was found that high peak currents in cyclic voltammograms are not the indicators for high ECL signals, which should be obvious because the ECL mechanism requires more complex electron transfers. Overall, the standard TPA ECL at 1.2 V in phosphate buffer at pH 7.0 can successfully be replaced by NBEA ECL at 900 mV in Tris at pH 8.5 providing significantly higher signals accompanied by more gentle electrochemical conditions.

Valence States Effect on Electrogenerated Chemiluminescence of Gold Nanocluster

This work elucidated the valence states effect on the electrogenerated chemiluminescence (ECL) performance of gold nanocluster (AuNC). The N-acetyl-l-cysteine-AuNCs (NAC-AuNCs) and the electrochemical reduction method for reducing the AuNCs were first employed to this study. Results demonstrate that the electrochemical reduction degree of the AuNCs depended on the reduction potential, and the enhancement of the ECL signals was positively correlated with the reduction degree of AuNCs, which indicated that the valence state of Au plays a vital role in the ECL performance of AuNCs. Furthermore, the proposed method has been successfully extended to the chemical reduction technique and other nanoclusters. Therefore, an excellent AuNC-based ECL method with various advantages, such as simple preparation, lower toxicity, high sensitivity, and Φ_ECL, and excellent stability, has been proposed. This approach not only opens up a new avenue for designing and developing ECL device from other functional-metal based NCs, but also extends the huge potential application in the ECL sensing.

Electrochemical Methods to Study Photoluminescent Carbon Nanodots: Preparation, Photoluminescence Mechanism and Sensing

With unique and tunable photoluminescence (PL) properties, carbon nanodots (CNDs) as a new class of optical tags have been extensively studied. Because of their merits of controllability and sensitivity to the surface of nanomaterials, electrochemical methods have already been adopted to study the intrinsic electronic structures of CNDs. In this review, we mainly deal with the electrochemical researches of CNDs, including preparation, PL mechanism, and biosensing.