Sequence-specific recognition of DNA oligomer using peptide nucleic acid (PNA)-modified synthetic ion channels: PNA/DNA hybridization in nanoconfined environment

Pore-Size-Dependent Role of Functional Elements at the Outer Surface and Inner Wall in Single-Nanochannel Biosensors

Biological nanopores feature functional elements on the outer surfaces (FEOS) and inner walls (FEIW), enabling precise control over ions and molecules with exceptional sensitivity and specificity. This provides valuable inspiration to scientists for the development of intelligent artificial nanochannel-based platforms, with a wide range of potential applications, including biosensors. Much effort has been dedicated to investigating the distinct contribution of FEOS and FEIW of multichannel membrane biosensors. However, the intricate interactions among neighboring pores in multichannel biosensors have presented challenges. This underscores the untapped potential of single nanochannels as ideal candidates in this field. Here, we employed single nanochannel membranes with different pore sizes to investigate the distinct contributions of FEIW and FEOS to single-nanochannel biosensors, combined with numerical simulations. Our findings revealed that alterations in the negative charges of FEIW and FEOS, induced by target binding, have differential effects on ion transport, contingent upon the degree of nanoconfinement. In the case of smaller pores, such as 20 nm, the ion concentration polarization driven by FEIW can independently control ion transport through the surface's electric double layer. However, as the pore size increases to 40-60 nm, both FEIW and FEOS become essential for effective ion concentration polarization. When the pore size reaches 100 nm, both FEIW and FEOS are ineffective and thus unsuitable for biosensors. Simulations demonstrate that the observed phenomena can be attributed to the interactions between the charges of FEIW and FEOS within the overlapping electric double layer under confinement. These results underscore the critical role of pore size as a key parameter in governing the functionality of probes within or on nanopore-based biosensors as well as in the design of nanopore-based devices.

The Detection of Trace Metal Contaminants in Organic Products Using Ion Current Rectifying Quartz Nanopipettes

While ion current rectification (ICR) in aprotic solvent has been fundamentally studied, its application in sensing devices lacks exploration. The development of sensors operable in these solvents is highly beneficial to the chemical industry, where polar aprotic solvents, such as acetonitrile, are widely used. Currently, this industry relies on the use of inductively coupled plasma mass spectrometry (ICP-MS) and optical emission spectroscopy (OES) for the detection of metal contamination in organic products. Herein, we present the detection of trace amounts of Pd2+ and Co2+ using ion current rectification, in cyclam-functionalized quartz nanopipettes, with tetraethylammonium tetrafluoroborate (TEATFB) in MeCN as supporting electrolyte. This methodology is employed to determine the concentration of Pd in organic products, before and after purification by Celite filtration and column chromatography, obtaining comparable results to ICP-MS within minutes and without complex sample preparation. Finite element simulations are used to support our experimental findings, which reveal that the formation of double-junction diodes in the nanopore enables trace detection of these metals, with a significant response from baseline even at picomolar concentrations.

Solid-State Nanopore/Nanochannel Sensors with Enhanced Selectivity through Pore-in Modification

Nanopore sensing technology, as an emerging analytical method, has the advantages of simple operation, fast output, and label-free and has been widely used in fields such as protein analysis, gene sequencing, and biomarker detection. Inspired by biological ion channels, scientists have prepared various artificial solid-state nanopores/nanochannels. Biological ion channels have extremely high ion transport selectivity, while solid-state nanopores/nanochannels have poor selectivity. The selectivity of solid-state nanopores and nanochannels can be enhanced by modifying channel charge, varying pore size, incorporating specific chemical functionality, and adjusting operating (or solution) conditions. This Perspective highlights pore-in modification strategies for enhancing the selectivity of solid-state nanopore/nanochannel sensors by summarizing the articles published in the last 10 years. The future development prospects and challenges of pore-in modification in solid-state nanopore and nanochannel sensors are discussed. This Perspective helps readers better understand nanopore sensing technology, especially the importance of detection selectivity. We believe that solid-state nanopore/nanochannel sensors will soon enter our homes after various challenges.

Solid-State Nanopores for Biomolecular Analysis and Detection

Advances in nanopore technology and data processing have rendered DNA sequencing highly accessible, unlocking a new realm of biotechnological opportunities. Commercially available nanopores for DNA sequencing are of biological origin and have certain disadvantages such as having specific environmental requirements to retain functionality. Solid-state nanopores have received increased attention as modular systems with controllable characteristics that enable deployment in non-physiological milieu. Thus, we focus our review on summarizing recent innovations in the field of solid-state nanopores to envision the future of this technology for biomolecular analysis and detection. We begin by introducing the physical aspects of nanopore measurements ranging from interfacial interactions at pore and electrode surfaces to mass transport of analytes and data analysis of recorded signals. Then, developments in nanopore fabrication and post-processing techniques with the pros and cons of different methodologies are examined. Subsequently, progress to facilitate DNA sequencing using solid-state nanopores is described to assess how this platform is evolving to tackle the more complex challenge of protein sequencing. Beyond sequencing, we highlight the recent developments in biosensing of nucleic acids, proteins, and sugars and conclude with an outlook on the frontiers of nanopore technologies.

Functionalized nanopores based on hybridization chain reaction: Fabrication and microRNA sensing

Enzyme-free hybridization chain reaction (HCR) technology is often used as a signal amplification tool for the detection of different targets. In this study, an ultrasensitive and label-free method for detecting miRNA-21 was developed using the nanopore ionic current rectification (ICR) technology coupled with HCR technology. The probe oligonucleotide (DNA1) was combined with the gold-coated nanopore through the Au-S bond to form a DNA1-functionalized gold-coated nanopore (DNA1-Au-coated nanopore). Since miRNA-21 is partially complementary to DNA1, it can be selectively recognized by DNA1-functionalized gold-coated nanopores. The target (miRNA-21) can induce the opening of hairpin DNA and HCR reaction after the introduction of hairpin DNA H1 and H2. The concentration of miRNA-21 will affect the combination of H1 and H2 on the inner wall of the nanopore, and its surface charge will change with the internal modification, thereby changing the ion current rectification ratio. Under the condition that the concentration of H1, H2 and HCR reaction time are constant, the change of ICR ratio is linearly correlated with the logarithm of miRNA-21 concentration within a certain range, which shows that the sensing strategy we designed can achieve target miRNA-21 detection. This ultrasensitive miRNA holds great promise in the field of cancer diagnosis.

Poly(ethylene glycol) diacrylate based hydrogel filled micropore with enhanced sensing capability

Ionic current rectification (ICR) phenomena conventionally occurs in nanopores which dimensions are comparable to the thickness of their electrical double layers. However, the microscale ICR in a micropore can also exist under some conditions. Here, the charged hydrogel filled conical micropore was constructed to realize microscale ICR. To better understand the micropore ICR, the influences of space charge density of the hydrogel, micropore geometry, the hydrogel filling length as well as the electrolyte concentration and pH were investigated. Furthermore, we developed a PEGDA-based hydrogel filled micropore sensing platform which sensing performance was enhanced due to the weakly charged PEGDA. The promyelocytic leukemia (PML)/retinoic acid receptor alpha (RARA) fusion genes and adenosine triphosphate (ATP) were respectively used as model analytes and the measured detection limits of 0.1 pM were achieved. The successful realization of microscale ICR in a homogenous and functional hydrogel filled micropore suggests that the fabrication, characterization and operation of ICR based devices can be more robust and facilitated for the wider applications.

Electrochemical Single-Cell Protein Therapeutics Using a Double-Barrel Nanopipette

Single-cell protein therapeutics is expected to promote our in-depth understanding of how a specific protein with a therapeutic dosage treats the cell without population averaging. However, it has not yet been tackled by current single-cell nanotools. We address this challenge by the use of a double-barrel nanopipette, in which one lumen was used for electroosmotic cytosolic protein delivery and the other was customized for ionic evaluation of the consequence. Upon injection of protein DJ-1 through the delivery lumen, upregulation of the antioxidant protein could protect neural PC-12 cells against oxidative stress from phorbol myristate acetate exposure, as deduced by targeting of the cytosolic hydrogen peroxide by the detecting lumen. The nanotool developed in this study for single-cell protein therapeutics provides a perspective for future single-cell therapeutics involving different therapeutic modalities, such as peptides, enzymes and nucleic acids.

Electrodiffusioosmosis induced negative differential resistance in micro-to-millimeter size pores through a graphene/copper membrane

Negative differential resistance (NDR) is one of the nonlinear transport phenomena in which ionic current decreases with the increase in electromotive potential. Electro-osmosis, diffusio-osmosis, and surface charge density of pores are the driving forces for observing NDR in nanoscale ion transport. Here, we report electrodiffusioosmosis induced NDR using micro to millimeter size pores in a two-dimensional (2D) graphene-coated copper (Gr/Cu) membrane. Along with NDR, we also observed ion current rectification (ICR), in which there is preferential one-directional ion flow for equal and opposite potentials. The experimentally observed NDR effect has been validated by performing ion transport simulations using Poisson-Nernst-Planck (PNP) equations and Navier-Stokes equations with the help of COMSOL Multiphysics considering salinity gradient across the membrane. Charge polarization induced electro-osmotic flow (EOF) dominates over diffusio-osmosis, causing the backflow of low concentration/conductivity solution into the pore, thereby causing NDR. This finding paves the way toward potential applications in ionic tunnel diodes as rectifiers, switches, amplifiers, and biosensors.

Functional nucleic acid engineered double-barreled nanopores for measuring sodium to potassium ratio at single-cell level

The use of double-barreled nanopipette (θ-nanopipette) to electrically sample, manipulate, or detect biomaterials has recently seen strong growth in single-cell studies, driven by the potential of the nanodevices and applications that they may enable. Considering the pivotal roles of Na/K ratio (R_Na/K) at cellular level, herein we describe an engineered θ-nanopipette for measuring single-cell R_Na/K. The two independently addressable nanopores, located within one nanotip, allow respective customization of functional nucleic acids but simultaneous deciphering of Na and K levels inside a single cell of a non-Faradic manner. Two ionic current rectification signals, corresponding to the Na- and K-specific smart DNA responses, could be easily used to derive the R_Na/K. The applicability of this nanotool is validated by practical probing intracellular R_Na/K during the drug-induced primary stage of apoptotic volume decrease. Especially, the R_Na/K has been shown by our nanotool to be different in cell lines with different metastatic potential. This work is expected to contribute to futuristic study of single-cell R_Na/K in various physiological and pathological processes.

Solid-state nanopore: chemical modifications, interactions, and functionalities

Nanopore technology is a burgeoning detection technology for single-molecular sensing and ion rectification. Solid-state nanopores have attracted more and more attention because of their higher stability and tunability than biological nanopores. However, solid-state nanopores still suffer the drawbacks of low signal-to-noise ratio and low resolution, which hinders their practical applications. Thus, developing operatical and useful methods to overcome the shortages of solid-state nanopores is urgently needed. Here, we summarize the recent research on nanopore modification to achieve this goal. Modifying solid-state nanopores with different coating molecules can improve the selectivity, sensitivity, and stability of nanopores. The modified molecules can introduce different functions into the nanopores, greatly expanding the applications of this novel detection technology. We hope that this review of nanopore modification will provide new ideas for this field.

Oligonucleotide Discrimination Enabled by Tannic Acid-Coordinated Film-Coated Solid-State Nanopores

Discrimination of nucleotides serves as the basis for DNA sequencing using solid-state nanopores. However, the translocation of DNA is usually too fast to be detected, not to mention nucleotide discrimination. Here, we utilized polyphenolic TA and Fe³⁺, an attractive metal-organic thin film, and achieved a fast and robust surface coating for silicon nitride nanopores. The hydrophilic coating layer can greatly reduce the low-frequency noise of an original unstable nanopore, and the nanopore size can be finely tuned in situ at the nanoscale by simply adjusting the relative ratio of Fe³⁺ and TA monomers. Moreover, the hydrogen bonding interaction formed between the hydroxyl groups provided by TA and the phosphate groups of DNAs significantly increases the residence time of a short double-strand (100 bp) DNA. More importantly, we take advantage of the different strengths of hydrogen bonding interactions between the hydroxyl groups provided by TA and the analytes to discriminate between two oligonucleotide samples (oligodeoxycytidine and oligodeoxyadenosine) with similar sizes and lengths, of which the current signal patterns are significantly different using the coated nanopore. The results shed light on expanding the biochemical functionality of surface coatings on solid-state nanopores for future biomedical applications.

Adjusting the Structure of a Peptide Nucleic Acid (PNA) Molecular Beacon and Promoting Its DNA Detection by a Hybrid with Quencher-Modified DNA

In this study, we performed an elaborate adjustment of the structure of peptide nucleic acid (PNA) molecular beacons as probes for detecting nucleic acids. We synthesized the PNA beacons with various numbers of Glu, Lys, and dabcyl (Dab) quenchers in them, and we investigated their fluorescence changes (F1/1/F0) with and without full-match DNA. As the numbers of Glu/Lys or Dab increased, the F1/1/F0 tended to decrease. Among the different beacons, the PNA beacon with one Glu and one Lys (P1Q1) showed the largest F1/1/F0. On the other hand, a relatively large F1/1/F0 was obtained when the number of Glu/Lys and the number of Dab were the same, and the balance between the numbers of Glu/Lys and Dab seemed to affect the F1/1/F0. We also investigated the DNA detection by the prehybrid of P1Q1, which consists of the T790M base sequence, [P1Q1(T790M)], with quencher-modified DNA (Q-DNA). We examined the DNA detection with single-base mismatch by P1Q1(T790M), and we clarified that there was difficulty in detecting the sequence with P1Q1 alone, but that the sequence was successfully detected by the prehybrid of P1Q1 with the Q-DNA.

Biomimetic Nanochannels: From Fabrication Principles to Theoretical Insights

Biological nanochannels which can regulate ionic transport across cell membranes intelligently play a significant role in physiological functions. Inspired by these nanochannels, numerous artificial nanochannels have been developed during recent years. The exploration of smart solid-state nanochannels can lay a solid foundation, not only for fundamental studies of biological systems but also practical applications in various fields. The basic fabrication principles, functional materials, and diverse applications based on artificial nanochannels are summarized in this review. In addition, theoretical insights into transport mechanisms and structure-function relationships are discussed. Meanwhile, it is believed that improvements will be made via computer-guided strategy in designing more efficient devices with upgrading accuracy. Finally, some remaining challenges and perspectives for developments in both novel conceptions and technology of this inspiring research field are stated.

Brownian dynamics of cylindrical capsule-like particles in a nanopore in an electrically biased solid-state membrane

We use Brownian dynamics simulations to study the motion of cylindrical capsule-like particles (capsules) as they translocate through nanopores of various radii in an electrically biased silicon membrane. We find that for all pore sizes the electrostatic interaction between the particle and the pore results in the particle localization towards the pore 's center when the membrane and the particle have charges of the same sign (case 1) while in case of the opposite sign charges, the capsule prefers to stay near and along the nanopore wall (case 2). The preferential localization leads to all capsules rotating less while inside the pore compared to the bulk solution, with a larger net charge and/or particle length resulting in a smaller range of rotational movement. It also strongly affects the whole translocation process: in the first case, the translocation is due to the free diffusion along the pore axis and is weakly dependent on the particle charge and the nanopore radius while in the second case, the translocation time dramatically increases with the particle size and charge as the capsule gets "stuck" to the nanopore surface.

Bio-inspired Track-Etched Polymeric Nanochannels: Steady-State Biosensors for Detection of Analytes

Bio-inspired polymeric nanochannel (also referred as nanopore)-based biosensors have attracted considerable attention on account of their controllable channel size and shape, multi-functional surface chemistry, unique ionic transport properties, and good robustness for applications. There are already very informative reviews on the latest developments in solid-state artificial nanochannel-based biosensors, however, which concentrated on the resistive-pulse sensing-based sensors for practical applications. The steady-state sensing-based nanochannel biosensors, in principle, have significant advantages over their counterparts in term of high sensitivity, fast response, target analytes with no size limit, and extensive suitable range. Furthermore, among the diverse materials, nanochannels based on polymeric materials perform outstandingly, due to flexible fabrication and wide application. This compressive Review summarizes the recent advances in bio-inspired polymeric nanochannels as sensing platforms for detection of important analytes in living organisms, to meet the high demand for high-performance biosensors for analysis of target analytes, and the potential for development of smart sensing devices. In the future, research efforts can be focused on transport mechanisms in the field of steady-state or resistive-pulse nanochannel-based sensors and on developing precisely size-controlled, robust, miniature and reusable, multi-functional, and high-throughput biosensors for practical applications. Future efforts should aim at a deeper understanding of the principles at the molecular level and incorporating these diverse pore architectures into homogeneous and defect-free multi-channel membrane systems. With the rapid advancement of nanoscience and biotechnology, we believe that many more achievements in nanochannel-based biosensors could be achieved in the near future, serving people in a better way.

Multilabel hybridization probes for sequence-specific detection of sepsis-related drug resistance genes in plasmids

Emerging antimicrobial drug resistance is increasing the complexity involved in treating critical conditions such as bacterial induced sepsis. Methods for diagnosing specific drug resistance tend to be rapid or sensitive, but not both. Detection methods like sequence-specific single-molecule analysis could address this concern if they could be adapted to work on smaller targets similar to those produced in traditional clinical situations. In this work we demonstrate that a 120 bp double stranded polynucleotide with an overhanging single stranded 25 bp probe sequence can be created by immobilizing DNA with a biotin/streptavidin magnetic bead system, labeling with SYBR Gold, and rinsing the excess away while the probe retains multiple fluorophores. These probes with multiple fluorophores can then be used to label a bacterial plasmid target in a sequence-specific manner. These probes enabled the detection of 1 pM plasmid samples containing a portion of an antibiotic resistance gene sequence. This system shows the possibility of improving capture and fluorescence labeling of small nucleic acid fragments, generating lower limits of detection for clinically relevant samples while maintaining rapid processing times.

Structure and dynamics of nanoconfined water and aqueous solutions

This review is devoted to discussing recent progress on the structure, thermodynamic, reactivity, and dynamics of water and aqueous systems confined within different types of nanopores, synthetic and biological. Currently, this is a branch of water science that has attracted enormous attention of researchers from different fields interested to extend the understanding of the anomalous properties of bulk water to the nanoscopic domain. From a fundamental perspective, the interactions of water and solutes with a confining surface dramatically modify the liquid's structure and, consequently, both its thermodynamical and dynamical behaviors, breaking the validity of the classical thermodynamic and phenomenological description of the transport properties of aqueous systems. Additionally, man-made nanopores and porous materials have emerged as promising solutions to challenging problems such as water purification, biosensing, nanofluidic logic and gating, and energy storage and conversion, while aquaporin, ion channels, and nuclear pore complex nanopores regulate many biological functions such as the conduction of water, the generation of action potentials, and the storage of genetic material. In this work, the more recent experimental and molecular simulations advances in this exciting and rapidly evolving field will be reported and critically discussed.

Bioinspired Solid-State Nanochannel Sensors: From Ionic Current Signals, Current, and Fluorescence Dual Signals to Faraday Current Signals

Inspired from bioprotein channels of living organisms, constructing "abiotic" analogues, solid-state nanochannels, to achieve "smart" sensing towards various targets, is highly seductive. When encountered with certain stimuli, dynamic switch of terminal modified probes in terms of surface charge, conformation, fluorescence property, electric potential as well as wettability can be monitored via transmembrane ionic current, fluorescence intensity, faraday current signals of nanochannels and so on. Herein, the modification methodologies of nanochannels and targets-detecting application are summarized in ions, small molecules, as well as biomolecules, and systematically reviewed are the nanochannel-based detection means including 1) by transmembrane current signals; 2) by the coordination of current- and fluorescence-dual signals; 3) by faraday current signals from nanochannel-based electrode. The coordination of current and fluorescence dual signals offers great benefits for synchronous temporal and spatial monitoring. Faraday signals enable the nanoelectrode to monitor both redox and non-redox components. Notably, by incorporation with confined effect of tip region of a needle-like nanopipette, glorious in-vivo monitoring is conferred on the nanopipette detector at high temporal-spatial resolution. In addition, some outlooks for future application in reliable practical samples analysis and leading research endeavors in the related fantastic fields are provided.

Revealing Ionic Signal Enhancement with Probe Grafting Density on the Outer Surface of Nanochannels

Probe-modified nanopores/nanochannels are one of the most advanced sensors because the probes interact strongly with ions and targets in nanoconfinement and create a sensitive and selective ionic signal. Recently, ionic signals have been demonstrated to be sensitive to the probe-target interaction on the outer surface of nanopores/nanochannels, which can offer more open space for target recognition and signal conversion than nanoconfined cavities. To enhance the ionic signal, we investigated the effect of grafting density, a critical parameter of the sensing interface, of the probe on the outer surface of nanochannels on the change rate of the ionic signal before and after target recognition (β). Electroneutral peptide nucleic acids and negatively charged DNA are selected as probes and targets, respectively. The experimental results showed that when adding the same number of targets, the β value increased with the probe grafting density on the outer surface. A theoretical model with clearly defined physical properties of each probe and target has been established. Numerical simulations suggest that the decrease of the background current and the aggregation of targets at the mouth of nanochannels with increasing probe grafting density contribute to this enhancement. This work reveals the signal mechanism of probe-target recognition on the outer surface of nanochannels and suggests a general approach to the nanochannel/nanopore design leading to sensitivity improvement on the basis of relatively good selectivity.

Ultrasensitive and Selective Protein Recognition with Nanobody-Functionalized Synthetic Nanopores

The development of flexible and reconfigurable sensors that can be readily tailored toward different molecular analytes constitutes a key goal and formidable challenge in biosensing. In this regard, synthetic nanopores have emerged as potent physical transducers to convert molecular interactions into electrical signals. Yet, systematic strategies to functionalize their surfaces with receptor proteins for the selective detection of molecular analytes remain scarce. Addressing these limitations, a general strategy is presented to immobilize nanobodies in a directional fashion onto the surface of track-etched nanopores exploiting copper-free click reactions and site-specific protein conjugation systems. The functional immobilization of three different nanobodies is demonstrated in ligand binding experiments with green fluorescent protein, mCherry, and α-amylase (α-Amy) serving as molecular analytes. Ligand binding is resolved using a combination of optical and electrical recordings displaying quantitative dose-response curves. Furthermore, a change in surface charge density is identified as the predominant molecular factor that underlies quantitative dose-responses for the three different protein analytes in nanoconfined geometries. The devised strategy should pave the way for the systematic functionalization of nanopore surfaces with biological receptors and their ability to detect a variety of analytes for diagnostic purposes.

Peptide Nucleic Acid-Functionalized Nanochannel Biosensor for the Highly Sensitive Detection of Tumor Exosomal MicroRNA

Compared with free miRNAs in blood, miRNAs in exosomes have higher abundance and stability. Therefore, miRNAs in exosomes can be regarded as an ideal tumor marker for early cancer diagnosis. Here, a peptide nucleic acid (PNA)-functionalized nanochannel biosensor for the ultrasensitive and specific detection of tumor exosomal miRNAs is proposed. After PNA was covalently bound to the inner surface of the nanochannels, the detection of tumor exosomal miRNAs was achieved by the charge changes on the surface of nanochannels before and after hybridization (PNA-miRNA). Due to the neutral characteristics of PNA, the efficiency of PNA-miRNA hybridization was improved by significantly reducing the background signal. This biosensor could not only specifically distinguish target miRNA-10b from single-base mismatched miRNA but also achieve a detection limit as low as 75 aM. Moreover, the biosensor was further used to detect exosomal miRNA-10b derived from pancreatic cancer cells and normal pancreatic cells. The results indicate that this biosensor could effectively distinguish pancreatic cancer tumor-derived exosomes from the normal control group, and the detection results show good consistency with those of the quantitative reverse-transcription polymerase chain reaction method. In addition, the biosensor was used to detect exosomal miRNA-10b in clinical plasma samples, and it was found that the content of exosomal miRNA-10b in cancer patients was generally higher than that of healthy individuals, proving that the method is expected to be applied for the early diagnosis of cancer.

Single-molecule, hybridization-based strategies for short nucleic acids detection and recognition with nanopores

DNA nanotechnology has seen large developments over the last 30 years through the combination of detection and discovery of DNAs, and solid phase synthesis to increase the chemical functionalities on nucleic acids, leading to the emergence of novel and sophisticated in features, nucleic acids-based biopolymers. Arguably, nanopores developed for fast and direct detection of a large variety of molecules, are part of a revolutionary technological evolution which led to cheaper, smaller and considerably easier to use devices enabling DNA detection and sequencing at the single-molecule level. Through their versatility, the nanopore-based tools proved useful biomedicine, nanoscale chemistry, biology and physics, as well as other disciplines spanning materials science to ecology and anthropology. This mini-review discusses the progress of nanopore- and hybridization-based DNA detection, and explores a range of state-of-the-art applications afforded through the combination of certain synthetically-derived polymers mimicking nucleic acids and nanopores, for the single-molecule biophysics on short DNA structures.

Application of peptide nucleic acid in electrochemical nucleic acid biosensors

The early diagnosis of major diseases, such as malignant tumors, has always been an important field of research. Through screening, early detection of such diseases, and timely and effective treatment can significantly improve the survival rate of patients and reduce medical costs. Therefore, the development of a simple detection method with high sensitivity and strong specificity, and that is low cost is of great significance for the diagnosis and prognosis of the disease. Electrochemical DNA biosensing analysis is a technology based on Watson Crick base complementary pairing, which uses the capture probe of a known sequence to specifically recognize the target DNA and detect its concentration. Because of its advantages of low cost, simple operation, portability, and easy miniaturization, it has been widely researched and has become a cutting-edge topic in the field of biochemical analysis and precision medicine. However, the existing methods for electrochemical DNA biosensing analysis have some shortcomings, such as poor stability and specificity of capture probes, insufficient detection sensitivity, and long detection cycles. In this review, we focus on improving the sensitivity and practicability of electrochemical DNA biosensing analysis methods and summarize a series of research work carried out by using electrically neutral peptide nucleic acid as an immobilized capture probe.

An Integrated Electrochemical Nanodevice for Intracellular RNA Collection and Detection in Single Living Cell

New tools for single-cell interrogation enable deeper understanding of cellular heterogeneity and associated cellular behaviors and functions. Information of RNA expression in single cell could contribute to our knowledge of the genetic regulatory circuits and molecular mechanism of disease development. Although significant progresses have been made for intracellular RNA analysis, existing methods have a trade-off between operational complexity and practical feasibility. We address this challenge by combining the ionic current rectification property of nanopipette reactor with duplex-specific nuclease-assisted hybridization chain reaction for signal amplification to realize a simple and practical intracellular nanosensor with minimal invasiveness, which enables single-cell collection and electrochemical detection of intracellular RNA with cell-context preservation. Systematic studies on differentiation of oncogenic miR-10b expression levels in non-malignant breast cells, metastatic breast cancer cells as well as non-metastatic breast cancer cells were then realized by this nanotool accompanied by assessment of different drugs effects. This work has unveiled the ability of electrochemistry to probe intracellular RNA and opened new opportunities to study the gene expression and heterogeneous complexity under physiological conditions down to single-cell level.

Semiflexible polymer scaffolds: an overview of conjugation strategies

Semiflexible polymers are excellent scaffolds for the presentation of a wide variety of (bio)molecules. This manuscript reviews advantages and challenges of the most common conjugation strategies for the major classes of semiflexible polymers.

Highly Efficient Permeation and Separation of Gases with Metal-Organic Frameworks Confined in Polymeric Nanochannels

This work demonstrates the confinement of porous metal-organic framework (HKUST-1) on the surface and walls of track-etched nanochannel in polyethylene terephthalate (np-PET) membrane using a liquid-phase epitaxy (LPE) technique. The composite membrane (HKUST-1/np-PET) exhibits defect-free MOF growth continuity, strong attachment of MOF to the support, and a high degree of flexibility. The high flexibility and the strong confinement of the MOF in composite membrane results from (i) the flexible np-PET support, (ii) coordination attachment between HKUST-1 and the support, and (iii) the growth of HKUST-1 crystal in nanoconfined geometries. The MOF has a preferred growth orientation with a window size of 3.5 Å, resulting in a clear cut-off of CO₂ from natural gas and olefins. The experimental results and DFT calculations show that the restricted diffusion of gases only takes place through the nanoporous MOF confined in the np-PET substrate. This research thereby provides a new perspective to grow other porous MOFs in artificially prepared nanochannels for the realization of continuous, flexible, and defect-free membranes for various applications.

Ultrasensitive detection of ochratoxin A based on biomimetic nanochannel and catalytic hairpin assembly signal amplification

In this paper, an ultrasensitive nanochannel sensor has been proposed for label-free Ochratoxin A (OTA) assay in combination with graphene oxide (GO) and catalyzed hairpin assembly (CHA). The high-performance sensor is segmented into two parts. One is composed of graphene oxide (GO) and DNA probes. In the presence of target OTA, OTA works as a catalyst to trigger the self-assembly pathway of the two probes and initiate the cycling of CHA circuits, which results in numerous double-stranded DNAs (dsDNA) in solution. The excess ssDNA probes are removed by GO. The other part is composed of biomimetic nanochannel coated with polyethyleneimine (PEI) and Zr⁴⁺, which can quantify the concentration of OTA by detecting the dsDNA in solution. The nanofluidic device has a detection limit of as low as 6.2 pM with an excellent selectivity. The nanochannel based assay was used to analyse food samples (red wine) with satisfied results. Thus, the proposed analytical method will provide a new approach the detection of OTA and can be applied for quality control to ensure food safety.

Sequence-specific detection of single-stranded DNA with a gold nanoparticle-protein nanopore approach

Fast, cheap and easy to use nucleic acids detection methods are crucial to mitigate adverse impacts caused by various pathogens, and are essential in forensic investigations, food safety monitoring or evolution of infectious diseases. We report here a method based on the α-hemolysin (α-HL) nanopore, working in conjunction to unmodified citrate anion-coated gold nanoparticles (AuNPs), to detect nanomolar concentrations of short single-stranded DNA sequences (ssDNA). The core idea was to use charge neutral peptide nucleic acids (PNA) as hybridization probe for complementary target ssDNAs, and monitor at the single-particle level the PNA-induced aggregation propensity AuNPs during PNA–DNA duplexes formation, by recording ionic current blockades signature of AuNP–α-HL interactions. This approach offers advantages including: (1) a simple to operate platform, producing clear-cut readout signals based on distinct size differences of PNA-induced AuNPs aggregates, in relation to the presence in solution of complementary ssDNAs to the PNA fragments (2) sensitive and selective detection of target ssDNAs (3) specific ssDNA detection in the presence of interference DNA, without sample labeling or signal amplification. The powerful synergy of protein nanopore-based nanoparticle detection and specific PNA–DNA hybridization introduces a new strategy for nucleic acids biosensing with short detection time and label-free operation.

Unzipping Mechanism of Free and Polyarginine-Conjugated DNA-PNA Duplexes, Preconfined Inside the α-Hemolysin Nanopore

In this work, comparative studies on DNA-PNA and polyarginine-conjugated DNA-PNA duplexes unzipping inside the α-hemolysin nanopore (α-HL) are presented. We identified significant differences in the blockade currents, as the applied voltage across the nanopore facilitated the duplex capture inside the nanopore's vestibule against the constriction region, subsequent cDNA strand insertion inside the nanopore's β-barrel past the constriction site, its complete unzip from the duplex, and translocation. We observed that inside the voltage-biased nanopore, polyarginine-conjugated DNA-PNA duplexes dehybridize faster than their DNA-PNA counterparts and proposed a model to describe the duplex unzipping. This study identifies key particularities of DNA-PNA duplex unzipping as it takes place inside the nanopore and being preceded by entrapment in the vestibule domain of the α-HL. Our results are a crucial step toward understanding the nucleic acids duplexes unzipping kinetics variability, in confined, variable geometries.

Surface Potential/Charge Sensing Techniques and Applications

Surface potential and surface charge sensing techniques have attracted a wide range of research interest in recent decades. With the development and optimization of detection technologies, especially nanosensors, new mechanisms and techniques are emerging. This review discusses various surface potential sensing techniques, including Kelvin probe force microscopy and chemical field-effect transistor sensors for surface potential sensing, nanopore sensors for surface charge sensing, zeta potentiometer and optical detection technologies for zeta potential detection, for applications in material property, metal ion and molecule studies. The mechanisms and optimization methods for each method are discussed and summarized, with the aim of providing a comprehensive overview of different techniques and experimental guidance for applications in surface potential-based detection.

Electrodiffusioosmosis-Induced Negative Differential Resistance in pH-Regulated Mesopores Containing Purely Monovalent Solutions

Negative differential resistance (NDR) refers to a unique electrical property where current decreases with increasing voltage. Herein, we report experimental evidence showing that the NDR effect can be observed in mesopores that feature charged pore walls and are subjected to a KCl concentration gradient. NDR in our system originates from the solution and ion flows driven by the synergistic effects of electroosmosis [electroosmotic flow (EOF)] and diffusioosmosis, the so-called electrodiffusioosmosis. Experiments reveal that in addition to the ion current rectification, the mesopores considered here exhibit the NDR phenomenon that is dependent on the magnitude and direction of the salinity gradient and on pH. The NDR behavior can be observed only at conditions at which the EOF and diffusioosmosis occur in the opposite directions: diffusioosmosis fills the tip opening with a high concentration solution, while EOF brings a low concentration solution to the pore. All experimental findings are supported by our numerical model, which takes into account the interfacial site reactions of acidic and basic functional groups on the entire pore membrane surfaces. Our results provide an important insight into how liquid pH, salinity gradients, interfacial site reactions, and pore geometries can influence the current-voltage characteristics of mesopores, enriching transport modes that can be induced by voltage.

Ultrasensitive and regenerable nanopore sensing based on target induced aptamer dissociation

For ionic current rectification (ICR) based sensing, nanopore functionalizations are mostly designed for directly binding target molecules to generate detectable signals from surface charge variation. However, this strategy is highly dependent on the charge difference between the captured molecules and surface functionalization layers, which will increase the nanopore design difficulty and subsequently limit the nanopore applicability. Another key challenge for ICR based sensing is the nanopore regenerability that is critical if online monitoring or repeated determination needs to be performed with one sensor. Though some types of nanopore regeneration have been realized on some specific targets or with harsh conditions, it is still highly favored to develop a regenerability using mild conditions for various targets. To address these two challenges, we developed a novel and universal sensing strategy for aptamer-functionalized nanopore that can be easily regenerated after each usage without any harsh conditions and independent of target molecule charge or size for ICR based nanopore sensing. Ochratoxin A (OTA) was used as a model analyte and its corresponding aptamer partially hybridized with the pre-immobilized complementary DNA (cDNA) onto the nanopore inner surface. We demonstrated that the recognition and conjugation of OTA with its aptamer resulted in rectified ionic current variations due to the dissociation between the OTA aptamer and its partially paired cDNA. The performance of this nanopore sensor including sensitivity, selectivity, regenerability, and applicability was characterized using rectified ionic current. This nanopore sensing strategy will provide a promising platform for extensive targets and online sensing applications.

Ionic circuitry with nanofluidic diodes

Ionic circuits composed of nanopores functionalized with polyelectrolyte chains can operate in aqueous solutions, thus allowing the control of electrical signals and information processing in physiological environments. We demonstrate experimentally and theoretically that different orientations of single-pore membranes with the same and opposite surface charges can operate reliably in series, parallel, and mixed series-parallel arrangements of two, three, and four nanofluidic diodes using schemes similar to those of solid-state electronics. We consider also different experimental procedures to externally tune the fixed charges of the molecular chains functionalized on the pore surface, showing that single-pore membranes can be used efficiently in ionic circuitry with distinct ionic environments.

Unraveling the Anomalous Surface-Charge-Dependent Osmotic Power Using a Single Funnel-Shaped Nanochannel

Nanofluidic osmotic power, which converts a difference in salinity between brine and fresh water into electricity with nanoscale channels, has received more and more attention in recent years. It is long believed that to gain high-performance osmotic power, highly charged channel materials should be exploited so as to enhance the ion selectivity. In this paper, we report counterintuitive surface-charge-density-dependent osmotic power in a single funnel-shaped nanochannel (FSN), violating the previous viewpoint. For the highly charged nanochannel, the performance of osmotic power decreases with a further increase in its surface charge density. With increasing pH (surface charge density), the FSN enables a local maximum power density as high as ∼3.5 kW/m² in a 500 mM/1 mM KCl gradient. This observation is strongly supported by our rigorous model where the equilibrium chemical reaction between functional carboxylate ion groups on the channel wall and protons is taken into account. The modeling reveals that for a highly charged nanochannel, a significant increase in the surface charge density amplifies the ion concentration polarization effect, thus weakening the effective salinity ratio across the channel and undermining the osmotic power generated.

Surface coatings for solid-state nanopores

Since their introduction in 2001, solid-state nanopores have been increasingly exploited for the detection and characterization of biomolecules ranging from single DNA strands to protein complexes. A major factor that enables the application of nanopores to the analysis and characterization of a broad range of macromolecules is the preparation of coatings on the pore wall to either prevent non-specific adhesion of molecules or to facilitate specific interactions of molecules of interest within the pore. Surface coatings can therefore be useful to minimize clogging of nanopores or to increase the residence time of target analytes in the pore. This review article describes various coatings and their utility for changing pore diameters, increasing the stability of nanopores, reducing non-specific interactions, manipulating surface charges, enabling interactions with specific target molecules, and reducing the noise of current recordings through nanopores. We compare the coating methods with respect to the ease of preparing the coating, the stability of the coating and the requirement for specialized equipment to prepare the coating.

Fluid surface coatings for solid-state nanopores: comparison of phospholipid bilayers and archaea-inspired lipid monolayers

In the context of sensing and characterizing single proteins with synthetic nanopores, lipid bilayer coatings provide at least four benefits: first, they minimize unwanted protein adhesion to the pore walls by exposing a zwitterionic, fluid surface. Second, they can slow down protein translocation and rotation by the opportunity to tether proteins with a lipid anchor to the fluid bilayer coating. Third, they provide the possibility to impart analyte specificity by including lipid anchors with a specific receptor or ligand in the coating. Fourth, they offer a method for tuning nanopore diameters by choice of the length of the lipid's acyl chains. The work presented here compares four properties of various lipid compositions with regard to their suitability as nanopore coatings for protein sensing experiments: (1) electrical noise during current recordings through solid-state nanopores before and after lipid coating, (2) long-term stability of the recorded current baseline and, by inference, of the coating, (3) viscosity of the coating as quantified by the lateral diffusion coefficient of lipids in the coating, and (4) the success rate of generating a suitable coating for quantitative nanopore-based resistive pulse recordings. We surveyed lipid coatings prepared from bolaamphiphilic, monolayer-forming lipids inspired by extremophile archaea and compared them to typical bilayer-forming phosphatidylcholine lipids containing various fractions of curvature-inducing lipids or cholesterol. We found that coatings from archaea-inspired lipids provide several advantages compared to conventional phospholipids; the stable, low noise baseline qualities and high viscosity make these membranes especially suitable for analysis that estimates physical protein parameters such as the net charge of proteins as they enable translocation events with sufficiently long duration to time-resolve dwell time distributions completely. The work presented here reveals that the ease or difficulty of coating a nanopore with lipid membranes did not depend significantly on the composition of the lipid mixture, but rather on the geometry and surface chemistry of the nanopore in the solid state substrate. In particular, annealing substrates containing the nanopore increased the success rate of generating stable lipid coatings.

Nonfunctionalized PNAs as Beacons for Nucleic Acid Detection in a Nanopore System

In this work, single-channel current recordings were used to selectively detect individual ssDNA strands in the vestibule of the α-hemolysin (α-HL) protein nanopore. The sensing mechanism was based on the detection of the intrinsic topological change of target ssDNA molecules after the hybridization with complementary PNA fragments. The readily distinguishable current signatures of PNA-DNA duplexes reversible association with the α-HL's vestibule, in terms of blockade amplitudes and kinetic features, allows specific detection of nucleic acid hybridization.

Single conical track-etched nanopore for a free-label detection of OSCS contaminants in heparin

The heparin contamination by oversulfated chondroitin (OSCS) was at the origin of one major sanitary problem of last decade. Here we propose a novel strategy to detect OSCS from heparin solution based on conical nanopore functionalized with poly-L-lysine deposition to ensure its re-usability. This sensor is an excellent to detect low heparin concentration (from 25 ng/ml to 3 μg/ml) using the modification of ionic current rectification. It also allows following the kinetic of heparin degradation by heparinase with a good correlation with results obtained by classical methods. The sensor is sensitive to the inhibition of heparinase by OSCS until a concentration of 200 pg/ml representing 0.01% in weight in a heparin. This resolution is one order of magnitude lower than the one obtained by chromatography. For the first time, it was reached without fluorescence labeling.

Reversing current rectification to improve DNA-sensing sensitivity in conical nanopores

Herein, we report the ultrasensitive DNA detection through designing an elegant nanopore biosensor as the first case to realize the reversal of current rectification direction for sensing. Attributed to the unique asymmetric structure, the glass conical nanopore exhibits the sensitive response to the surface charge, which can be facilely monitored by ion current rectification curves. In our design, an enzymatic cleavage reaction was employed to alter the surface charge of the nanopore for DNA sensing. The measured ion current rectification was strongly responsive to DNA concentrations, even reaching to the reversed status from the negative ratio (-6.5) to the positive ratio (+16.1). The detectable concentration for DNA was as low as 0.1 fM. This is an ultrasensitive and label-free DNA sensing approach, based on the rectification direction-reversed amplification in a single glass conical nanopore.

Biomimetic Nanochannel-Ionchannel Hybrid for Ultrasensitive and Label-Free Detection of MicroRNA in Cells

A biomimetic nanochannel-ionchannel hybrid coupled with electrochemical detector was developed for label-free and ultrasensitive detection of microRNA (miRNA) in cells. Probe single stranded DNA (ssDNA) was first immobilized on the outer surface of the nanochannel-ionchannel hybrid membrane, which can hybridize with the target miRNA in cells. Due to the unique mass transfer property of the hybrid, the DNA-miRNA hybridization kinetics can be sensitively monitored in real-time using the electrochemical technique. More importantly, due to the super small size of the ionchannels, the DNA probe immobilization and hybridization process can be carried out on the outer surface of the ionchannel side, which can effectively avoid the blockage and damage of channels and thus considerably enhance the reproducibility and accuracy of the method. Using this strategy, the miRNA ranging from 0.1 fM to 0.1 μM can be facilely detected with a low detection limit of 15.4 aM, which is much lower than most reported work. The present strategy provides a sensitive and label-free miRNA detection platform, which will be of great significance in biomedical research and clinical diagnosis.

Nanochannel-Ion Channel Hybrid Device for Ultrasensitive Monitoring of Biomolecular Recognition Events

We propose an in situ and label-free method for detection of biomolecular recognition events by use of a nanochannel-ion channel hybrid device integrated with an electrochemical detector. The aptamer is first immobilized on the outer surface of the nanochannel-ion channel hybrid. Its binding with target thrombin in solution considerably regulates the mass-transfer behavior of the device owing to the varied surface charge density and effective channel size. Via the electrochemical detector, the changed mass-transport property can be monitored in real time, which enables in situ and label-free detection of thrombin-aptamer recognition. The solution pH has a significant influence on detection sensitivity. Under optimal pH conditions, a detection limit as low as 0.22 fM thrombin can be achieved, which is much lower than most reported work. The present nanofluidic device provides a simple, ultrasensitive, and label-free platform for monitoring biomolecular recognition events, which would hold great potential in exploring the functions and reaction mechanisms of biomolecules in living systems.