Controlling polymersome surface topology at the nanoscale by membrane confined polymer/polymer phase separation

Polymersomes in Drug Delivery─From Experiment to Computational Modeling

Polymersomes, composed of amphiphilic block copolymers, are self-assembled vesicles that have gained attention as potential drug delivery systems due to their good biocompatibility, stability, and versatility. Various experimental techniques have been employed to characterize the self-assembly behaviors and properties of polymersomes. However, they have limitations in revealing molecular details and underlying mechanisms. Computational modeling techniques have emerged as powerful tools to complement experimental studies and enabled researchers to examine drug delivery mechanisms at molecular resolution. This review aims to provide a comprehensive overview of the state of the art in the field of polymersome-based drug delivery systems, with an emphasis on insights gained from both experimental and computational studies. Specifically, we focus on polymersome morphologies, self-assembly kinetics, fusion and fission, behaviors in flow, as well as drug encapsulation and release mechanisms. Furthermore, we also identify existing challenges and limitations in this rapidly evolving field and suggest possible directions for future research.

FAP Targeting of Photosensitizer-Loaded Polymersomes for Increased Light-Activated Cell Killing

As current chemo- and photodynamic cancer therapies are associated with severe side effects due to a lack of specificity and to systemic toxicity, innovative solutions in terms of targeting and controlled functionality are in high demand. Here, we present the development of a polymersome nanocarrier equipped with targeting molecules and loaded with photosensitizers for efficient uptake and light-activated cell killing. Polymersomes were self-assembled in the presence of photosensitizers from a mixture of nonfunctionalized and functionalized PDMS-b-PMOXA diblock copolymers, the latter designed for coupling with targeting ligands. By encapsulation inside the polymersomes, the photosensitizer Rose Bengal was protected, and its uptake into cells was mediated by the nanocarrier. Inhibitor of fibroblast activation protein α (FAPi), a ligand for FAP, was attached to the polymersomes' surface and improved their uptake in MCF-7 breast cancer cells expressing relatively high levels of FAP on their surface. Once internalized by MCF-7, irradiation of Rose Bengal-loaded FAPi-polymersomes generated reactive oxygen species at levels high enough to induce cell death. By combining photosensitizer encapsulation and specific targeting, polymersomes represent ideal candidates as therapeutic nanocarriers in cancer treatment.

Glycan-Driven Formation of Raft-Like Domains with Hierarchical Periodic Nanoarrays on Dendrimersome Synthetic Cells

The accurate spatial segregation into distinct phases within cell membranes coordinates vital biochemical processes and functionalities in living organisms. One of nature's strategies to localize reactivity is the formation of dynamic raft domains. Most raft models rely on liquid-ordered L0 phases in a liquid-disordered Ld phase lacking correlation and remaining static, often necessitating external agents for phase separation. Here, we introduce a synthetic system of bicomponent glycodendrimersomes coassembled from Janus dendrimers and Janus glycodendrimers (JGDs), where lactose-lactose interactions exclusively drive lateral organization. This mechanism results in modulated phases across two length scales, yielding raft-like microdomains featuring nanoarrays at the nanoscale. By varying the density of lactose and molecular architecture of JGDs, the nanoarray type and size, shape, and spacing of the domains were controlled. Our findings offer insight into the potential primordial origins of rudimentary raft domains and highlight the crucial role of glycans within the glycocalyx.

Physically and Chemically Compartmentalized Polymersomes for Programmed Delivery and Biological Applications

Multicompartment polymersomes (MCPs) refer to polymersomes that not only contain one single compartment, either in the membrane or in the internal cavity, but also mimic the compartmentalized structure of living cells, attracting much attention in programmed delivery and biological applications. The investigation of MCPs may promote the application of soft nanomaterials in biomedicine. This Review seeks to highlight the recent advances of the design principles, synthetic strategies, and biomedical applications of MCPs. The compartmentalization types including chemical, physical, and hybrid compartmentalization are discussed. Subsequently, the design and controlled synthesis of MCPs by the self-assembly of amphiphilic polymers, double emulsification, coprecipitation, microfluidics and particle assembly, etc. are summarized. Furthermore, the diverse applications of MCPs in programmed delivery of various cargoes and biological applications including cancer therapy, antimicrobials, and regulation of blood glucose levels are highlighted. Finally, future perspectives of MCPs from the aspects of controlled synthesis and applications are proposed.

Effect of amphiphilic polymers on phase separating binary mixtures: A DPD simulation study

We present the phase separation dynamics of a binary (AB), simple fluid (SF), and amphiphilic polymer (AP) mixture using dissipative particle dynamics simulation at d = 3. We study the effect of different AP topologies, including block copolymers, ring block copolymers (RCP), and miktoarm star polymers, on the evolution morphologies, dynamic scaling functions, and length scale of the AB mixture. Our results demonstrate that the presence of APs leads to significantly different evolution morphologies in SF. However, the deviation from dynamical scaling is prominent, mainly for RCP. Typically, the characteristic length scale for SF follows the power law R(t) ∼ tϕ, where ϕ is the growth exponent. In the presence of high AP, we observe diffusive growth (ϕ → 1/3) at early times, followed by saturation in length scale (ϕ → 0) at late times. The extent of saturation varies with constraints imposed on the APs, such as topology, composition ratio, chain length, and stiffness. At lower composition ratios, the system exhibits inertial hydrodynamic growth (ϕ → 2/3) at asymptotic times without clearly exhibiting the viscous hydrodynamic regime (ϕ → 1) at earlier times in our simulations. Our results firmly establish the existence of hydrodynamic growth regimes in low surfactant-influenced phase separation kinetics of binary fluids and settle the related ambiguity in d = 3 systems.

Membrane and Lumen-Compartmentalized Polymersomes for Biocatalysis and Cell Mimics

Compartmentalization is a crucial feature of a natural cell, manifested in cell membrane and inner lumen. Inspired by the cellular structure, multicompartment polymersomes (MCPs), including membrane-compartmentalized polymersomes and lumen-compartmentalized polymersomes (polymersomes-in-polymersomes), have aroused great expectations for biological applications such as biocatalysis and cell mimics in the past decades. Compared with traditional polymersomes, MCPs have advantages in encapsulating multiple enzymes separately for multistep enzymatic cascade reactions. In this review, first, the design principles and preparation methods of membrane-compartmentalized and lumen-compartmentalized polymersomes are summarized. Next, recent advances of MCPs as nanoreactors and cell mimics to mimic subcellular organelles or artificial cells are discussed. Finally, the future research directions of MCPs are prospected.

Nanoparticles fabricated from the bioactive tilapia scale collagen for wound healing: Experimental approach

The creation of innovative wound-healing nanomaterials based on natural compounds emerges as a top research goal. This research aimed to create a gel containing collagen nanoparticles and evaluate its therapeutic potential for skin lesions. Collagen nanoparticles were produced from fish scales using desolvation techniques. Using SDS PAGE electrophoresis, Fourier transform infrared spectroscopy (FTIR) as well as the structure of the isolated collagen and its similarities to collagen type 1 were identified. The surface morphology of the isolated collagen and its reformulation into nanoparticles were examined using transmission and scanning electron microscopy. A Zeta sizer was used to examine the size, zeta potential, and distribution of the synthesized collagen nanoparticles. The cytotoxicity of the nanomaterials was investigated and an experimental model was used to evaluate the wound healing capability. The overall collagen output from Tilapia fish scales was 42%. Electrophoretic patterns revealed that the isolated collagen included a unique protein with chain bands of 126-132 kDa and an elevated beta band of 255 kDa. When compared to the isolated collagen, the collagen nanoparticles' FTIR results revealed a significant drop in the amide II (42% decrease) and amide III (32% decrease) band intensities. According to SEM analysis, the generated collagen nanoparticles ranged in size from 100 to 350 nm, with an average diameter of 182 nm determined by the zeta sizer. The produced collagen nanoparticles were polydispersed in nature and had an equivalent average zeta potential of -17.7 mV. Cytotoxicity study showed that, when treating fibroblast cells with collagen nanoparticle concentrations, very mild morphological alterations were detected after human skin fibroblasts were treated with collagen nanoparticles 32 μg/ml for 24 hours, as higher concentrations of collagen nanoparticles caused cell detachment. Macroscopical and histological investigations proved that the fabricated fish scale collagen nanoparticles promoted the healing process in comparison to the saline group.

Dual functionalized hyaluronic acid micelles loading paclitaxel for the therapy of breast cancer

Although many carriers for the delivery of chemotherapeutic drugs have been investigated, the disadvantages of passive targeting and uncontrolled drug release limit their utility. Herein, hyaluronic acid (HA) was hydrophobically modified to serve as a carrier for binding to cluster determinant 44 (CD44) overexpressed on tumor cell surfaces. Specifically, after deacetylation, HA was grafted to dodecylamine or tetradecylamine to afford amphiphilic zwitterionic polymer micelles, designated dHAD and dHAT, respectively, for the delivery of paclitaxel (PTX). The micelles were negatively charged at pH 7.4 and positively charged at pH 5.6, and this pH sensitivity facilitated PTX release under acidic conditions. The cell uptake efficiencies of the dHAD-PTX and dHAT-PTX micelles by MCF-7 cells after 4 h of incubation were 96.9% and 95.4%, respectively, and their affinities for CD44 were twice that of HA. Furthermore, the micelles markedly inhibited tumor growth both in vitro and in vivo, with IC50 values of 1.943 μg/mL for dHAD-PTX and 1.874 μg/mL for dHAT-PTX for MCF-7 cells; the tumor inhibition rate of dHAD-PTX (92.96%) was higher than that of dHAT-PTX (78.65%). Importantly, dHAD and dHAT micelles showed negligible systemic toxicity. Our findings suggest that these micelles are promising delivery vehicles for antitumor drugs.

Bottom-Up Preparation of Phase-Separated Polymersomes

A bottom-up approach to fabricating monodisperse, two-component polymersomes that possess phase-separated ("patchy") chemical topology is presented. This approach is compared with already-existing top-down preparation methods for patchy polymer vesicles, such as film rehydration. These findings demonstrate a bottom-up, solvent-switch self-assembly approach that produces a high yield of nanoparticles of the target size, morphology, and surface topology for drug delivery applications, in this case patchy polymersomes of a diameter of ≈50 nm. In addition, an image processing algorithm to automatically calculate polymersome size distributions from transmission electron microscope images based on a series of pre-processing steps, image segmentation, and round object identification is presented.

Assessment of core-shell nanoparticles surface structure heterogeneity by SAXS contrast variation and ab initio modeling

For the biomedical applications of nanoparticles, the study of their structure is a major step towards understanding the mechanisms of their interaction with biological environment. Detailed structural analysis of particles' surface is vital for rational design of drug delivery systems. In particular, for core-shell or surface-modified nanoparticles surface structure can be described in terms of shell coating uniformity and shell thickness uniformity around the nanoparticle core. Taken together, these terms can be used to indicate degree of heterogeneity of nanoparticle surface structure. However, characterization of nanoparticle surface structure under physiological conditions is challenging due to limitations of experimental techniques. In this paper, we apply SAXS contrast variation combined with ab initio bead modeling for this purpose. Approach is based on the fact that nanoparticles under study are produced by self-assembly of phospholipid-conjugated molecules that possess moieties with significantly different electron densities enabling SAXS technique to be used to distinguish nanoparticle shell and study its structure. Ab initio single phase and ab initio multiphase modeling based on SAXS curve of nanoparticles in phosphate buffer solution allowed to reconstruct nanoparticle shell coating and assess its uniformity, while serial nanoparticle reconstructions from solutions with gradually increased solvent electron densities revealed relative shell coating thickness around nanoparticle core. Nanoparticle shell structure representation was verified by molecular dynamics simulation and derived full-atom nanoparticle shell structure showed good agreement with SAXS-derived representation. Obtained data indicate that studied nanoparticles exhibit highly heterogeneous surface structure.

Nanoparticle delivery through the BBB in central nervous system tuberculosis

Recent advances in Nanotechnology have revolutionized the production of materials for biomedical applications. Nowadays, there is a plethora of nanomaterials with potential for use towards improvement of human health. On the other hand, very little is known about how these materials interact with biological systems, especially at the nanoscale level, mainly because of the lack of specific methods to probe these interactions. In this review, we will analytically describe the journey of nanoparticles (NPs) through the brain, starting from the very first moment upon injection. We will preliminarily provide a brief overlook of the physicochemical properties of NPs. Then, we will discuss how these NPs interact with the body compartments and biological barriers, before reaching the blood-brain barrier (BBB), the last gate guarding the brain. Particular attention will be paid to the interaction with the biomolecular, the bio-mesoscopic, the (blood) cellular, and the tissue barriers, with a focus on the BBB. This will be framed in the context of brain infections, especially considering central nervous system tuberculosis (CNS-TB), which is one of the most devastating forms of human mycobacterial infections. The final aim of this review is not a collection, nor a list, of current literature data, as it provides the readers with the analytical tools and guidelines for the design of effective and rational NPs for delivery in the infected brain.

Fabrication of Polymersomes: A Macromolecular Architecture in Nanotherapeutics

In consideration of the issues of drug delivery systems, the artificial vesicle structures composed of block copolymers called polymersomes recently gained considerable attention. The possibility of tuning the mechanical parameter and increasing the scale-up production of polymersomes led to its wide application in healthcare. Bearing in mind the disease condition, the structure and properties of the polymersomes could be tuned to serve the purpose. Furthermore, specific ligands can be incorporated on the vesicular surface to induce smart polymersomes, thus improving targeted delivery. The synthesis method and surface functionalization are the two key aspects that determine the versatility of biological applications as they account for stability, specific targeting, degradability, biocompatibility, and bioavailability. A perfectly aligned polymer vesicle can mimic the cells/organelles and function by avoiding cytotoxicity. This supramolecular structure can carry and deliver payloads of a wide range, including drugs, proteins, and genes, contributing to the construction of next-generation therapeutics. These aspects promote the potential use of such components as a framework to approach damaged tissue while maintaining healthy environments during circulation. Herein, this article concentrates specifically on the drug delivery applications of polymersomes.

Dose-enhancement of MCF 7 cell line radiotherapy using silica-iron oxide nanocomposite

Cancer radiotherapy is one of the most effective regimens of cancer treatments, but cancer cell radioresistance remains a concern. Radiosensitizers can selectively improve the efficacy of radiotherapy and reduce inherent damage. The purpose of this work is to evaluate the effect of silica-coated iron oxide magnetic nanoparticles (SIONPs) as a radiosensitizer and compare their therapeutic effect with that of Iron oxide magnetic nanoparticles (IONPs). IONPs and SIONPs were characterized using several physical techniques such as a transmission electron microscope (TEM) and Vibrating sample magnetometer (VSM). MTT and DNA double-strand breaks (Comet) assays have been used to detect the cytotoxicity, cell viability, and DNA damage of MCF-7 cells, which were treated with different concentrations of prepared nanoparticles and exposed to an X-ray beam. In this study, an efficient radiosensitizer, SIONPs, was successfully prepared and characterized. With 0.5 Gy dose, dose enhancement factor (DEF) values of cells treated with 5 and 10 μg/ml of IONPs were 1 and 1.09, respectively, while those treated with SIONPs at these concentrations had DEF of 1.21 and 1.32, respectively. Results demonstrated that SIONPs provide a potential for improving the radiosensitivity of breast cancer.

pH/reduction dual-responsive hyaluronic acid-podophyllotoxin prodrug micelles for tumor targeted delivery

Polymer-based prodrug nanocarriers with tumor-targeting and controlled-release properties are in great demand for enhanced cancer treatment. Hyaluronic acid (HA), which has excellent biocompatibility and targeting ability for cluster determinant 44 (CD44), has been proposed for delivering drugs that have poor solubility and high toxicity. Herein, podophyllotoxin (PPT) was conjugated to HA via ester and disulfide linkages to construct a pH- and reduction-responsive prodrug (HA-S-S-PPT). The micelles self-assembled from HA-S-S-PPT prodrug efficiently accumulated at tumor site due to HA receptor-mediated endocytosis. HA-S-S-PPT micelles exhibited 33.1% higher cumulative release than HA-NH-CO-PPT micelles (sensitive only to pH) owing to their dual responsiveness to pH and reduction. HA-S-S-PPT micelles achieved excellent antitumor activity in vivo, with the tumor inhibition rate reaching 92%, significantly higher than that of HA-NH-CO-PPT micelles (65%), and negligible systemic toxicity. This controllable-targeting nanoparticle system provides a potential platform for clinical application of PPT.

Multicomponent Copolymer Planar Membranes with Nanoscale Domain Separation

Domain separation is crucial for proper cellular function and numerous biomedical technologies, especially artificial cells. While phase separation in hybrid membranes containing lipids and copolymers is well-known, the membranes' overall stability, limited by the lipid part, is hindering the technological applications. Here, we introduce a fully synthetic planar membrane undergoing phase separation into domains embedded within a continuous phase. The mono- and bilayer membranes are composed of two amphiphilic diblock copolymers (PEO₄₅-b-PEHOx₂₀ and PMOXA₁₀-b-PDMS₂₅) with distinct properties and mixed at various concentrations. The molar ratio of the copolymers in the mixture and the nature of the solid support were the key parameters inducing nanoscale phase separation of the planar membranes. The size of the domains and resulting morphology of the nanopatterned surfaces were tailored by adjusting the molar ratios of the copolymers and transfer conditions. Our approach opens new avenues for the development of biomimetic planar membranes with a nanoscale texture.

Ionic Combisomes: A New Class of Biomimetic Vesicles to Fuse with Life

The construction of biomembranes that faithfully capture the properties and dynamic functions of cell membranes remains a challenge in the development of synthetic cells and their application. Here a new concept for synthetic cell membranes based on the self-assembly of amphiphilic comb polymers into vesicles, termed ionic combisomes (i-combisomes) is introduced. These combs consist of a polyzwitterionic backbone to which hydrophobic tails are linked by electrostatic interactions. Using a range of microscopies and molecular simulations, the self-assembly of a library of combs in water is screened. It is discovered that the hydrophobic tails form the membrane's core and force the backbone into a rod conformation with nematic-like ordering confined to the interface with water. This particular organization resulted in membranes that combine the stability of classic polymersomes with the biomimetic thickness, flexibility, and lateral mobility of liposomes. Such unparalleled matching of biophysical properties and the ability to locally reconfigure the molecular topology of its constituents enable the harboring of functional components of natural membranes and fusion with living bacteria to "hijack" their periphery. This provides an almost inexhaustible palette to design the chemical and biological makeup of the i-combisomes membrane resulting in a powerful platform for fundamental studies and technological applications.

pH-sensitive hyaluronic acid-targeted prodrug micelles constructed via a one-step reaction for enhanced chemotherapy

Although many chemotherapy prodrugs have been developed for tumor therapy, non-targeted delivery, uncontrolled release and tedious construction procedure of prodrugs still limit their clinical application in tumor treatment. In this work, hyaluronic acid (HA) which has tumor-targeting ability was used to conjugate to antitumor drug podophyllotoxin (PPT) to construct a pH-sensitive prodrug named HA-CO-O-PPT just via a one-step esterification reaction. The HA-CO-O-PPT spontaneously assembled into nano spherical micelles in aqueous medium, which had outstanding serum stability and blood compatibility. The obtained prodrug micelles (named HP micelles) exhibited a pH-responsive drug release mode with cumulative release reaching 81.2% due to their dissociation in response to acid stimulus, and had a high cellular uptake efficiency beyond 97% owing to HA receptor-mediated targeting. Furthermore, it was found that the prodrug micelles showed excellent antitumor activities in vivo with the tumor inhibition ratio up to 85% and negligible systemic toxicity. Accordingly, the pH-responsive HP micelles constructed by a simple one-step reaction, could be a promising candidate as a chemotherapeutic agent for cancer therapy.

Patchy Micelles with a Crystalline Core: Self-Assembly Concepts, Properties, and Applications

Crystallization-driven self-assembly (CDSA) of block copolymers bearing one crystallizable block has emerged to be a powerful and highly relevant method for the production of one- and two-dimensional micellar assemblies with controlled length, shape, and corona chemistries. This gives access to a multitude of potential applications, from hierarchical self-assembly to complex superstructures, catalysis, sensing, nanomedicine, nanoelectronics, and surface functionalization. Related to these applications, patchy crystalline-core micelles, with their unique, nanometer-sized, alternating corona segmentation, are highly interesting, as this feature provides striking advantages concerning interfacial activity, functionalization, and confinement effects. Hence, this review aims to provide an overview of the current state of the art with respect to self-assembly concepts, properties, and applications of patchy micelles with crystalline cores formed by CDSA. We have also included a more general discussion on the CDSA process and highlight block-type co-micelles as a special type of patchy micelle, due to similarities of the corona structure if the size of the blocks is well below 100 nm.

Lipid nanovesicles for biomedical applications: 'What is in a name'?

Vesicles, generally defined as self-assembled structures formed by single or multiple concentric bilayers that surround an aqueous core, have been widely used for biomedical applications. They can either occur naturally (e.g. exosomes) or be produced artificially and range from the micrometric scale to the nanoscale. One the most well-known vesicle is the liposome, largely employed as a drug delivery nanocarrier. Liposomes have been modified along the years to improve physicochemical and biological features, resulting in long-circulating, ligand-targeted and stimuli-responsive liposomes, among others. In this process, new nomenclatures were reported in an extensive literature. In many instances, the new names suggest the emergence of a new nanocarrier, which have caused confusion as to whether the vesicles are indeed new entities or could simply be considered modified liposomes. Herein, we discussed the extensive nomenclature of vesicles based on the suffix "some" that are employed for drug delivery and composed of various types and proportions of lipids and others amphiphilic compounds. New names have most often been selected based on changes of vesicle lipid composition, but the payload, structural complexity (e.g. multicompartment) and new/improved proprieties (e.g. elasticity) have also inspired new vesicle names. Based on this discussion, we suggested a rational classification for vesicles.

The hollow core-shell ferric oxide entrapped chitosan microcapsules as phosphate binders for phosphorus removal in vitro

Patients in hyperphosphatemia are orally prescribed with phosphate binders to excrete the non-metabolic phosphorus. Aiming for the bio-compatibility and binding efficacy, the Fe-based phosphate binders of low toxicity have been explored and improved. Herein, the hollow core-shell microcapsules as Fe@CH (nano ferric oxide entrapped in the polymerized chitosan) were constructed via emulsion interface polymerization, to enhance the phosphate binding from -NH₂ group and iron complex, and limit iron leakage significantly. Via the double emulsion polymerization based on the primary Pickering emulsion stabilized by oleic acid-modified ferric oxide, Fe@CH performed as the rough polymerized-chitosan microcapsules entrapping well-distributed ferric oxide for the phosphate adsorption in vitro. At pH 3 and pH 5, Fe@CH bound phosphorus efficiently, with the capacity of 55 mg/g and 65 mg/g respectively, along with the excellent shell isolation from iron leakage and remarkable safety. Prospectively, the Fe@CH micro-sorbent is the proper candidate as the phosphate binder for hyperphosphatemia.

Computational design of Janus polymersomes with controllable fission from double emulsions

Janus polymer vesicles (polymersomes) with biphasic membranes have special properties and potential applications in many fields. The big barrier for the preparation of Janus polymersomes lies in the difficulty of complete lateral microphase separation of polymers along the vesicle membrane due to the limited mobility. Herein, we present a systematic simulation study to provide a new strategy for the fabrication of Janus polymersomes based on water-in-oil-in-water double emulsions. Two incompatible block copolymers of AB and AC completely separate into two hemispheres of the polymersome driven by the dewetting of double emulsions, followed by the stabilization of the Janus structure with the block copolymers BC at the interface between AB and AC hemispheres. The simulation results demonstrate the formation of Janus polymersomes in a wide range of the incompatibility between blocks B and C. In addition, the morphologies of the Janus polymersomes can be readily regulated by changing the number of copolymers BC, the ratio of AB to AC, and the dewetting rate of organic solvents. Both the Janus and patchy polymersomes can be obtained through the adjustment of the dewetting rate. Besides, by introducing stimulus-cleavable copolymers of BC, the Janus polymersomes can perform controllable fission. Further comparison with similar experiments has also demonstrated the feasibility of our strategy. We believe the present work will be useful for the fabrication of polymersomes with controlled patches in a large quantity, and the stimulus-responsive fission process will also make the polymersomes promising in some applications like controlled drug delivery and cytomimetic membrane communication.

The Utilization of Poly(2-ethyl-2-oxazoline)-b-Poly(ε-caprolactone) Ellipsoidal Particles for Intracellular BIKDDA Delivery to Prostate Cancer

Prostate cancer is the most common cancer, which is about 15-20% among male cancers worldwide. As most common strategies such as radiotherapy, chemotherapy, or surgery alone can be unsuccessful in the treatment of prostate cancer, this study aims to develop a new approach to deliver newly generated proapoptotic gene, BIKDDA, to androgen independent prostate cancer cells, 22RV1, using new generation nanocarriers called ellipsoids. As far as it is known, this is the first study that assesses the ability of proapoptotic gene BIKDDA to induce apoptosis in prostate cancer cell. BIKDDA encapsulating PEtOx-b-PCL-based ellipsoids are fabricated by solvent-switch method, and their morphology, size, and BIKDDA content are characterized. Gene delivery efficiency of BIKDDA loaded PEtOx-b-PCL ellipsoids is demonstrated by analysis of BIK mRNA expression with real-time PCR. The apoptotic effect of PEtOx-b-PCL ellipsoids loaded with BIKDDA (EPs-BIKDDA) on 22RV1 is shown by Annexin V staining. The obtained results demonstrate that the treatment of 22RV1 cells with EPs-BIKDDA can significantly increase BIK mRNA levels by 4.5-fold leading to cell death. This study not only represents BIKDDA as a potential therapeutic strategy in prostate cancer but also the capacity of ellipsoids as promising in vivo gene delivery vehicles.

Tuning cell behavior with nanoparticle shape

We investigated how the shape of polymeric vesicles, made by the exact same material, impacts the replication activity and metabolic state of both cancer and non-cancer cell types. First, we isolated discrete geometrical structures (spheres and tubes) from a heterogeneous sample using density-gradient centrifugation. Then, we characterized the cellular internalization and the kinetics of uptake of both types of polymersomes in different cell types (either cancer or non-cancer cells). We also investigated the cellular metabolic response as a function of the shape of the structures internalized and discovered that tubular vesicles induce a significant decrease in the replication activity of cancer cells compared to spherical vesicles. We related this effect to the significant up-regulation of the tumor suppressor genes p21 and p53 with a concomitant activation of caspase 3/7. Finally, we demonstrated that combining the intrinsic shape-dependent effects of tubes with the delivery of doxorubicin significantly increases the cytotoxicity of the system. Our results illustrate how the geometrical conformation of nanoparticles could impact cell behavior and how this could be tuned to create novel drug delivery systems tailored to specific biomedical application.

l-Asparaginase Encapsulation into Asymmetric Permeable Polymersomes

This work reports, for the encapsulation of l-asparaginase, an anticancer enzyme into hybrid PMPC₂₅-PDPA₇₀/PEO₁₆-PBO₂₂ asymmetric polymersomes previously developed by our group, with loading capacities with over 800 molecules per vesicle. Enzyme-loaded polymersomes show permeability and capacity to hydrolyze l-asparagine, which is essential to cancer cells. The nanoreactors proposed in this work can be potentially used in further studies to develop novel therapeutic alternatives based on l-asparaginase.

Systematic and Quantitative Structure-Property Relationships of Polymeric Medical Nanomaterials: From Systematic Synthesis and Characterization to Computer Modeling and Nano-Bio Interaction and Toxicity

Nanomaterials allow designing targeted therapies, facilitate molecular diagnostics, and are therefore enabling platforms for personalized medicine. A systematic science and a predictive understanding of molecular/supramolecular structure relationships and nanoparticle structure/biological property relationships are needed for rational design and clinical progress but are hampered by the anecdotal nature, nonsystematic and nonrepresentative nanomaterial assortment, and oligo-disciplinary approach of many publications. Here, we find that a systematic and comprehensive multidisciplinary approach to production and exploration of molecular-structure/nanostructure relationship and nano-bio structure/function relationship of medical nanomaterials can be achieved by combining systematic chemical synthesis, thorough physicochemical analysis, computer modeling, and biological experiments, as shown in a nanomaterial family of amphiphilic, micelle-forming oxazoline/siloxane block copolymers suited for the clinical application. This comprehensive interdisciplinary approach leads to improved understanding of nanomaterial structures, allows good insights into binding modes for the nanomaterial protein corona, induces the design of minimal cell-binding materials, and yields rational strategies to avoid toxicity. Thus, this work contributes to a systematic and scientific basis for rational design of medical nanomaterials.

Membrane Engineering: Phase Separation in Polymeric Giant Vesicles

Cell membranes exhibit elaborate lipidic patterning to carry out a myriad of functions such as signaling and trafficking. Domain formation in giant unilamellar vesicles (GUVs) is thus of interest for understanding fundamental biological processes and to provide new prospects for biocompatible soft materials. Lipid rearrangements in lipidic GUVs and lipid/polymer GUVs are extensively studied whereas polymer/polymer hybrid GUVs remain evasive. Here, the focus is on the thermodynamically driven phase separation of amphiphilic polymers in GUVs. It is demonstrated that polymer phase separation is entropically dictated by hydrophobic block incompatibilities and that films topology can help to determine the outcome of polymeric phase separation in GUVs. Lastly, Janus-GUVs are obtained and GUVs exhibit a single large domain by using a compatibilizing hydrophobic block copolymer.

Biomimicry of Cellular Motility and Communication Based on Synthetic Soft-Architectures

Cells, sophisticated membrane-bound units that contain the fundamental molecules of life, provide a precious library for inspiration and motivation for both society and academia. Scientists from various disciplines have made great endeavors toward the understanding of the cellular evolution by engineering artificial counterparts (protocells) that mimic or initiate structural or functional cellular aspects. In this regard, several works have discussed possible building blocks, designs, functions, or dynamics that can be applied to achieve this goal. Although great progress has been made, fundamental-yet complex-behaviors such as cellular communication, responsiveness to environmental cues, and motility remain a challenge, yet to be resolved. Herein, recent efforts toward utilizing soft systems for cellular mimicry are summarized-following the main outline of cellular evolution, from basic compartmentalization, and biological reactions for energy production, to motility and communicative behaviors between artificial cell communities or between artificial and natural cell communities. Finally, the current challenges and future perspectives in the field are discussed, hoping to inspire more future research and to help the further advancement of this field.

Polymersome-Based Modular Nanoreactors with Size-Selective Transmembrane Permeability

Polymersome nanoreactors encapsulating the enzymes or particulate catalysts attract interest because of their potential use as modular reactors to synthesize complex compounds via a cascade of chemical reactions in a single batch. To achieve these goals, a key requirement is the tunable permeability of the polymersome membrane, which allows the size-selective transportation of reagents and products while protecting the encapsulated catalysts during the chemical reaction. We report here a stimuli-responsive route for controlling the permeability of the polymersomes of the binary blend of poly(ethylene glycol)-b-polystyrene (PEG-b-PS) and poly(ethylene glycol)-b-poly(acrylbenzylborate) (PEG-b-PABB). The presence of H₂O₂ (1 mM) in the medium (0.1 M PBS, pH 7.4) triggers the oxidation of benzyl borate pendants of PABB to form poly(acrylic acid) (PAA). This transformation results in the perforation of the compartmentalizing membrane of polymersomes by the dissolution of PEG-b-PAA domains embedded in the inert PEG-b-PS matrix. By controlling the composition of the stimuli-responsive block copolymer, the polymersomes of the binary blend exhibit size-selective permeability without losing the structural integrity. Release of fluorescent guests with different sizes (fluorescein, PEG2k-Cm, PEG5k-Rho) can be controlled by tuning the composition (PEG-b-PS/PEG-b-PABB = 100/0-80/20) of blended polymersomes. Selective permeability of the membrane provides protection of the encapsulated enzymes from external proteases present in the medium, resulting in the one-pot synthesis of small molecules via cascades of chemical reactions. The nanoparticular catalysts are also encapsulated within the permeable polymersomes, serving as modular reactors for the conversion of organic compounds via a cascade of reactions.

Facile Mixing of Phospholipids Promotes Self-Assembly of Low-Molecular-Weight Biodegradable Block Co-Polymers into Functional Vesicular Architectures

In this work, we have used low-molecular-weight (PEG12-b-PCL6, PEG12-b-PCL9 or PEG16-b-PLA38; MW, 1.25-3.45 kDa) biodegradable block co-polymers to construct nano- and micron-scaled hybrid (polymer/lipid) vesicles, by solvent dispersion and electroformation methods, respectively. The hybrid vesicles exhibit physical properties (size, bilayer thickness and small molecule encapsulation) of a vesicular boundary, confirmed by cryogenic transmission electron microscopy, calcein leakage assay and dynamic light scattering. Importantly, we find that these low MW polymers, on their own, do not self-assemble into polymersomes at nano and micron scales. Using giant unilamellar vesicles (GUVs) model, their surface topographies are homogeneous, independent of cholesterol, suggesting more energetically favorable mixing of lipid and polymer. Despite this mixed topography with a bilayer thickness similar to that of a lipid bilayer, variation in surface topology is demonstrated using the interfacial sensitive phospholipase A2 (sPLA2). The biodegradable hybrid vesicles are less sensitive to the phospholipase digestion, reminiscent of PEGylated vesicles, and the degree of sensitivity is polymer-dependent, implying that the nano-scale surface topology can further be tuned by its chemical composition. Our results reveal and emphasize the role of phospholipids in promoting low MW polymers for spontaneous vesicular self-assembly, generating a functional hybrid lipid-polymer interface.

Biomolecule–polymer hybrid compartments: combining the best of both worlds

Recent advances in bio/polymer hybrid compartments in the quest to obtain artificial cells, biosensors and catalytic compartments.

On the design of precision nanomedicines

Tight control on the selectivity of nanoparticles' interaction with biological systems is paramount for the development of targeted therapies. However, the large number of tunable parameters makes it difficult to identify optimal design "sweet spots" without guiding principles. Here, we combine superselectivity theory with soft matter physics into a unified theoretical framework and we prove its validity using blood brain barrier cells as target. We apply our approach to polymersomes functionalized with targeting ligands to identify the most selective combination of parameters in terms of particle size, brush length and density, as well as tether length, affinity, and ligand number. We show that the combination of multivalent interactions into multiplexed systems enable interaction as a function of the cell phenotype, that is, which receptors are expressed. We thus propose the design of a "bar-coding" targeting approach that can be tailor-made to unique cell populations enabling personalized therapies.

iRGD-guided tamoxifen polymersomes inhibit estrogen receptor transcriptional activity and decrease the number of breast cancer cells with self-renewing capacity

BACKGROUND

Tamoxifen (Tam) is the most frequent treatment for estrogen receptor (ER) positive breast cancer. We recently showed that fibronectin (FN) leads to Tam resistance and selection of breast cancer stem cells. With the aim of developing a nanoformulation that would simultaneously tackle ER and FN/β1 integrin interactions, we designed polyethylene glycol-polycaprolactone polymersomes polymersomes (PS) that carry Tam and are functionalized with the tumor-penetrating iRGD peptide (iRGD-PS-Tam).

RESULTS

Polyethylene glycol-polycaprolactone PS were assembled and loaded with Tam using the hydration film method. The loading of encapsulated Tam, measured by UPLC, was 2.4 ± 0.5 mol Tam/mol polymer. Physicochemical characterization of the PS demonstrated that iRGD functionalization had no effect on morphology, and a minimal effect on the PS size and polydispersity (176 nm and Pdi 0.37 for iRGD-TAM-PS and 171 nm and Pdi 0.36 for TAM-PS). iRGD-PS-Tam were taken up by ER+ breast carcinoma cells in 2D-culture and exhibited increased penetration of 3D-spheroids. Treatment with iRGD-PS-Tam inhibited proliferation and sensitized cells cultured on FN to Tam. Mechanistically, treatment with iRGD-PS-Tam resulted in inhibition ER transcriptional activity as evaluated by a luciferase reporter assay. iRGD-PS-Tam reduced the number of cells with self-renewing capacity, a characteristic of breast cancer stem cells. In vivo, systemic iRGD-PS-Tam showed selective accumulation at the tumor site.

CONCLUSIONS

Our study suggests iRGD-guided delivery of PS-Tam as a potential novel therapeutic strategy for the management of breast tumors that express high levels of FN. Future studies in pre-clinical in vivo models are warranted.

Directed Insertion of Light-Activated Proteorhodopsin into Asymmetric Polymersomes from an ABC Block Copolymer

Nanoscopic artificial vesicles containing functional protein transporters are fundamental for synthetic biology. Energy-providing modules, such as proton pumps, are a basis for simple nanoreactors. We report on the first insertion of a functional transmembrane protein into asymmetric polymersomes from an ABC triblock copolymer. The polymer with the composition poly(ethylene glycol)-poly(diisopropylaminoethyl methacrylate)-poly(styrenesulfonate) (PEG-PDPA-PSS) was synthesized by sequential controlled radical polymerization. PEG and PSS are two distinctively different hydrophilic blocks, allowing for a specific orientation of our protein, the light-activated proton pump proteorhodopsin (PR), into the final proteopolymersome. A very interesting aspect of the PEG-PDPA-PSS triblock copolymers is that it allowed for simultaneous vesicle formation and oriented insertion of PR simply by adjusting the pH. The intrinsic positive charge of PR's intracellular surface was enhanced by a His-tag, which aligns readily with the negative charges of the PSS on the outside of the polymersomes. The directed insertion of PR was confirmed by a light-dependent pH change of the proteopolymersome solution, indicating the intended orientation. We have hereby demonstrated the first successful oriented insertion of a proton pump into an artificial asymmetric membrane.

Zwitterionic pH-responsive hyaluronic acid polymer micelles for delivery of doxorubicin

As zwitterionic polymers show great promise in drug delivery, hyaluronic acid (HA) was deacetylated and grafted with dodecylamine to prepare a pH-sensitive zwitterionic polymer dHAD used as a carrier for antitumor drugs. The polymer was negatively charged at pH 7.4 and became positive at pH 6.2. In vitro delivery of DOX against MCF-7 cells showed that the blank micelle dHAD had low cytotoxicity and the dHAD-DOX micelles could greatly prohibit the growth of the MCF-7 cells. In addition, the dHAD-DOX micelles had higher cellular uptake, indicating that the micelles were rapidly internalized into the cells via CD44 receptor-mediated endocytosis. The in vivo delivery of DOX to tumor-bearing mice confirmed that the dHAD-DOX micelles greatly inhibited the tumor growth and significantly reduced systemic toxicity of DOX. These results demonstrated that biocompatible pH-responsive zwitterionic dHAD micelles are promising carriers for the delivery of DOX.

Unraveling the Morphology-Function Relationships of Polyamide Membranes Using Quantitative Electron Tomography

An understanding of how complex nanoscale morphologies emerge from synthesis would offer powerful strategies to construct soft materials with designed structures and functions. However, these kinds of morphologies have proven difficult to characterize, and therefore manipulate, because they are three-dimensional (3D), nanoscopic, and often highly irregular. Here, we studied polyamide (PA) membranes used in wastewater reclamation as a prime example of this challenge. Using electron tomography and quantitative morphometry, we reconstructed the nanoscale morphology of 3D crumples and voids in PA membranes for the first time. Various parameters governing film transport properties, such as surface-to-volume ratio and mass-per-area, were measured directly from the reconstructed membrane structure. In addition, we extracted information inaccessible by other means. For example, 3D reconstruction shows that membrane nanostructures are formed from PA layers 15-20 nm thick folding into 3D crumples which envelope up to 30% void by volume. Mapping local curvature and thickness in 3D quantitatively groups these crumples into three classes, "domes", "dimples", and "clusters", each being a distinct type of microenvironment. Elemental mapping of metal ion adsorption across the film demonstrates that these previously missed parameters are relevant to membrane performance. This imaging-morphometry platform can be applicable to other nanoscale soft materials and potentially suggests engineering strategies based directly on synthesis-morphology-function relationships.

Carrier-free nanodrug-based virus-surface-mimicking nanosystems for efficient drug/gene co-delivery

Nature-inspired nanoparticles, from pathogens to mammalian cells, have attracted increasing attention, for their specific functions and unparalled features that are often desired in designing drug/gene delivery nonviral vectors. However, the applications of nonviral vectors are still suffering from the limits of low drug loading efficiency and/or low gene transfection efficiency. Herein, a novel carrier-free nanodrug-based virus-surface-mimicking gene delivery nanosystem is designed by condensing doxorubicin nanoparticles (DNPs) onto the surface of the PEI/DNA nanocomplex through electrostatic force, which would prolong the blood circulation time of PEI/DNA and confer high drug loading characteristics to the PEI/DNA nanosystem. Meanwhile, the gene transfection efficiency of DNA can also be enhanced for the increased roughness of coated DNPs. The in vitro and in vivo results demonstrate that carrier-free nanodrug-based gene delivery nanosystems with high drug loading efficiency (97.5%) as well as a rough surface can enhance the endocytosis of the nanoparticles, and consequently enhance the chemo/gene co-therapy of cancers. This is the first time soft materials are used to design virus-surface-mimicking nanocarriers, avoiding the side effects of inorganic materials caused by their non-degradable property. Importantly, our delicate design opens a new pathway to develop nature-inspired nanoparticles for cancer synergistic therapy.

Controllable Self-Assembly of Amphiphilic Tadpole-Shaped Polymer Single-Chain Nanoparticles Prepared through Intrachain Photo-cross-linking

We report the use of intramolecular cross-linking chemistry as a tool to control the self-assembly of amphiphilic diblock copolymers (di-BCPs). Two amphiphilic di-BCPs of poly( N, N'-dimethylacrylamide)- block-polystyrene (PDMA- b-PS) with photo-cross-linkable cinnamoyl groups in either hydrophobic or hydrophilic blocks were prepared using reversible addition-fragmentation chain transfer polymerization. Intramolecular photo-cross-linking of cinnamoyl groups led to the formation of tadpole-shaped polymer single-chain nanoparticles (SCNPs) consisting of a self-collapsed block as the "head" and an un-cross-linked block as the "tail". When intramolecular photo-cross-linking was carried out in hydrophobic PS blocks, a clear morphological transition from branched cylindrical micelles (for the linear di-BCP) to completely spherical micelles at a dimerization degree of ∼63% was observed. A pattern of morphological transitions from cylindrical micelles to spherical micelles is observed through stepwise downsizing the length of cylindrical micelles when increasing the self-collapse degree of PS blocks, whereas, in case of photo-cross-linking carried out in hydrophilic PDMA blocks, the size of micelles showed a dramatic increase due to the shift of hydrophobic-to-hydrophilic balance. When the cross-linking degree of PDMA blocks reached >60%, tadpole-shaped SCNPs assembled into nonconventional aggregates with a nonsmooth surface. Our results illustrate the impact of chain topologies on the self-assembly outcomes of amphiphilic di-BCPs, which likely opens a door to control the micellar morphologies from just one parent linear di-BCP, rather than resynthesizing BPCs with different volume fractions of the two blocks.

Nanoparticle heterogeneity: an emerging structural parameter influencing particle fate in biological media?

Drug nanocarriers' surface chemistry is often presumed to be uniform. For instance, the polymer surface coverage and distribution of ligands on nanoparticles are described with averaged values obtained from quantification techniques based on particle populations. However, these averaged values may conceal heterogeneities at different levels, either because of the presence of particle sub-populations or because of surface inhomogeneities, such as patchy surfaces on individual particles. The characterization and quantification of chemical surface heterogeneities are tedious tasks, which are rather limited by the currently available instruments and research protocols. However, heterogeneities may contribute to some non-linear effects observed during the nanoformulation optimization process, cause problems related to nanocarrier production scale-up and correlate with unexpected biological outcomes. On the other hand, heterogeneities, while usually unintended and detrimental to nanocarrier performance, may, in some cases, be sought as adjustable properties that provide NPs with unique functionality. In this review, results and processes related to this issue are compiled, and perspectives and possible analytical developments are discussed.

Targeting triple-negative breast cancer cells using Dengue virus-mimicking pH-responsive framboidal triblock copolymer vesicles

Dengue fever-mimicking pH-responsive framboidal triblock copolymer vesicles enable delivery of a nucleic acid payload to the nuclei of triple-negative breast cancer cells.

Tumor heterogeneity and nanoparticle-mediated tumor targeting: the importance of delivery system personalization

After the discovery of the enhanced permeability and retention effect in 1986, it was envisioned that nanoparticle-mediated tumor-targeted delivery of chemotherapeutics would make a radical change in cancer therapy. However, after three decades of extensive research, only a few nanotherapeutics have been approved for clinical use. Although significant advantages of nanomedicines have been demonstrated in pre-clinical studies, clinical outcome was found to be variable. Advanced research has revealed that significant biochemical and structural variations exist between (and among) different tumors. These variations can considerably affect the tumor delivery and efficacy of nanomedicines. Tumor penetration is an important determining factor for positive therapeutic outcome and same nanomedicine can show diverse efficacy against different tumors depending on the extent of tumor accumulation and penetration. Recent research has started shading light on how the tumor variations can influence nanoparticle tumor delivery. These findings indicate that there is no "ideal" design of nanoparticles for exhibiting equally high efficacy against a broad spectrum of tumors. For achieving maximum benefit of the nanotherapeutics, it is necessary to analyze the tumor microenvironment for understanding the biological and structural characteristics of the tumor. Designing of the nanomedicine should be done according to the tumor characteristics. In this comprehensive review, we have first given a brief overview of the design characteristics of nanomedicine which impact their tumor delivery. Then we discussed about the variability in the tumor architecture and how it influences nanomedicine delivery. Finally, we have discussed the possibility of delivery system personalization based on the tumor characteristics.

Polymer nanoparticles for the intravenous delivery of anticancer drugs: the checkpoints on the road from the synthesis to clinical translation

In this review article we discuss some of the key aspects concerning the development of a polymer-based nanoparticle formulation for intravenous drug delivery. Since numerous preparations fail before and during clinical trials, our aim is to emphasize the main issues that a nanocarrier has to face once injected into the body. These include biocompatibility and toxicity, drug loading and release, nanoparticle storage and stability, biodistribution, selectivity towards the target organs or tissues, internalization in cells and biodegradability. They represent the main checkpoints to define a polymer-based formulation as safe and effective. Indeed, this review is intended to provide guidelines to be followed in the early development of a new nanotherapeutic to hopefully increase the success rate of polymer-based formulations entering clinical trials. The corresponding requirements and characteristics are discussed in the context of some relevant case studies taken from the literature and mainly related to the delivery of lipophilic anticancer therapeutics.

Molecular bionics - engineering biomaterials at the molecular level using biological principles

Life and biological units are the result of the supramolecular arrangement of many different types of molecules, all of them combined with exquisite precision to achieve specific functions. Taking inspiration from the design principles of nature allows engineering more efficient and compatible biomaterials. Indeed, bionic (from bion-, unit of life and -ic, like) materials have gained increasing attention in the last decades due to their ability to mimic some of the characteristics of nature systems, such as dynamism, selectivity, or signalling. However, there are still many challenges when it comes to their interaction with the human body, which hinder their further clinical development. Here we review some of the recent progress in the field of molecular bionics with the final aim of providing with design rules to ensure their stability in biological media as well as to engineer novel functionalities which enable navigating the human body.