Biocompatible inorganic fullerene-like molybdenum disulfide nanoparticles produced by pulsed laser ablation in water

Advances on carbon nanomaterials and their applications in medical diagnosis and drug delivery

Carbon nanomaterials are indispensable due to their unique properties of high electrical conductivity, mechanical strength and thermal stability, which makes them important nanomaterials in biomedical applications and waste management. Limitations of conventional nanomaterials, such as limited surface area, difficulty in fine tuning electrical or thermal properties and poor dispersibility, calls for the development of advanced nanomaterials to overcome such limitations. Commonly, carbon nanomaterials were synthesized by chemical vapor deposition (CVD), laser ablation or arc discharge methods. The advancement in these techniques yielded monodispersed carbon nanotubes (CNTs) and allows p-type and n-type doping to enhance its electrical and catalytic activities. The functionalized CNTs showed exceptional mechanical, electrical and thermal conductivity (3500-5000 W/mK) properties. On the other hand, carbon quantum dots (CQDs) exhibit strong photoluminescence properties with high quantum yield. Carbon nanohorns are another fascinating type of nanomaterial that exhibit a unique structure with high surface area and excellent adsorption properties. These carbon nanomaterials could improve waste management by adsorbing pollutants from water and soil, enabling precise environmental monitoring, while enhancing wastewater treatment and drug delivery systems. Herein, we have discussed the potentials of all these carbon nanomaterials in the context of innovative waste management solutions, fostering cleaner environments and healthier ecosystems for diverse biomedical applications such as biosensing, drug delivery, and environmental monitoring.

Single bacteria identification with second-harmonic generation in MoS2

Transition-metal dichalcogenides exhibit extraordinary optical nonlinearities, making them promising candidates for advanced photonic applications. Here, we present the microbial control over second-harmonic generation (SHG) in monolayer MoS2 and the identification of single-cell bacteria. Bacteria deposited on monolayer MoS2 induce a change in the SHG signal, in the form of anisotropic polarization responses that depend on the relative orientation of the bacteria with respect to the MoS2 crystallographic direction. The anisotropic enhancement is consistent with the presence of a tensile stress along the lateral direction of bacteria axis; SHG imaging is highly effective in monitoring biomaterial strain as low as 0.1%. We also investigate the ultraviolet-induced removal of single bacteria, through the SHG imaging of MoS2. By monitoring the transient SHG signals, we determine the rupture times for bacteria, which varies noticeably for each species. This allows us to distinguish specific bacteria that share habitats; SHG imaging is useful for label free identification of pathogens at the single cell levels such as E. coli and L. casei. This label-free detection and identification of pathogens at the single-cell level can have a profound impact on the development of diagnostic tools for various applications.

Celebrating 20 Years of NCNST: Innovation in Nanoscience and Nanotechnology

With the development of nanoscience and technology, it has become an essential part of various research directions, changing our way of life, such as advanced accurate manufacturing in nanotechnology that facilitates reducing chip sizes, progress made in health care via nanoscience that provides hope to patients, and so on. As the nation's flagship institution of nanoscience and technology in China, the National Center for Nanoscience and Technology, China (NCNST), established in December 2003, has played a crucial role in promoting cutting-edge technologies in the field of nanoscience and expediting interdisciplinary fusion. With a strong research team and state-of-the-art research equipment, NCNST currently carries out frontier research and world-class technology innovation, including nanosystems and hierarchical fabrication, biological effects of nanomaterials and nanosafety, standardization and measurements for nanotechnology, as well as theoretical simulations. Serving as one of the most prestigious institutions in nanoscience and nanotechnology in China, NCNST will continue to foster impactful international cooperation, cultivate young talents, and boost inspiring innovation.

Utilization of 2D materials in aqueous zinc ion batteries for safe energy storage devices

Aqueous rechargeable battery has been an intense topic of research recently due to the significant safety issues of conventional Li-ion batteries (LIBs). Amongst the various candidates of aqueous batteries, aqueous zinc ion batteries (AZIBs) hold great promise as a next generation safe energy storage device due to its low cost, abundance in nature, low toxicity, environmental friendliness, low redox potential, and high theoretical capacity. Yet, the promise has not been realized due to their limitations, such as lower capacity compared to traditional LIB, dendrite growth, detrimental degradation of electrode materials structure as ions intercalate/de-intercalate, and gas evolution/corrosion at the electrodes, which remains a significant challenge. To address the challenges, various 2D materials with different physiochemical characteristics have been utilized. This review explores fundamental physiochemical characteristics of widely used 2D materials in AZIBs, including graphene, MoS2, MXenes, 2D metal organic framework, 2D covalent organic framework, and 2D transition metal oxides, and how their characteristics have been utilized or modified to address the challenges in AZIBs. The review also provides insights and perspectives on how 2D materials can help to realize the full potential of AZIBs for next-generation safe and reliable energy storage devices.

Synthesis, Characterisation, and Functionalisation of Charged Two-Dimensional MoS2

The applications of exfoliated MoS2 are limited by its inert surface and poor interface. We have activated the surface of exfoliated 2H-MoS2 by reacting it with NaBH4 , forming an n-doped material as demonstrated by a negative zeta-potential value ζ=-25 mV and a 20 nm (0.05 eV) red-shift in its photoluminescence spectrum. The novel material's spectral properties were consistent with pristine 2H-MoS2 (as determined by HR-TEM, XPS, pXRD, DRIFT, TGA, and Raman spectroscopy). Importantly, it was readily dispersed in H2 O unlike 2H-MoS2 . Its dispersibility properties were explored for a variety of solvents and could be directly correlated with the relative permittivity of the respective solvents. The charged 2H-MoS2 reacted readily with an organo-iodide to deliver functionalized 2H-MoS2 . Our approach delivers aqueous dispersions of semiconducting 2H-MoS2 , without additives or chemical functionalities, and allows for controlled and facile functionalization of 2H-MoS2 opening multiple new avenues of semi-conducting MoS2 application.

Quantum dots derived from two-dimensional transition metal dichalcogenides: synthesis, optical properties and optoelectronic applications

Zero-dimensional transition metal dichalcogenides (TMD) quantum dots (QDs) have attracted a lot of attention due to their interesting fundamental properties and various applications. Compared to TMD monolayers, the QD counterpart exhibits larger values for direct transition energies, exciton binding energies, absorption coefficient, luminescence efficiency, and specific surface area. These characteristics make them useful in optoelectronic devices. In this review, recent exciting progress on synthesis, optical properties, and applications of TMD QDs is highlighted. The first part of this article begins with a brief description of the synthesis approaches, which focus on microwave-assistant heating and pulsed laser ablation methods. The second part introduces the fundamental optical properties of TMD QDs, including quantum confinement in optical absorption, excitation-wavelength-dependent photoluminescence, and many-body effects. These properties are highlighted. In the third part, we discuss lastest advancements in optoelectronic devices based on TMD QDs These devices include light-emitting diodes, solar cells, photodetectors, optical sensors, and light-controlled memory devices. Finally, a brief summary and outlook will be provided.

Current material engineering strategies to prevent catheter encrustation in urinary tracts

Catheters and ureteric stents have played a vital role in relieving urinary obstruction in many urological conditions. With the increasing use of urinary catheters/stents, catheter/stent-related complications such as infection and encrustation are also increasing because of their design defects. Long-term use of antibiotics and frequent replacement of catheters not only increase the economic burden on patients but also bring the pain of catheter replacement. This is unfavorable for patients with long indwelling catheters or stents but inconvenient to replace. In recent years, some promising technologies and mechanisms have been used to prevent infection and encrustation, mainly drug loading coatings, functional coatings, biodegradable polymers and metallic materials for urinary devices. Obvious effects in anti-encrustation and anti-infection experiments of the above strategies in vivo or in vitro have been conducted, which is very helpful for further clinical trials. This review mainly introduces catheter/stent technology and mechanisms in the past ten years to address the potential impact of anti-encrustation coating of catheter/stent materials for the prevention of encrustation and to analyze the progress made in this field.

Transition metal dichalcogenide nanospheres for high-refractive-index nanophotonics and biomedical theranostics

Recent developments in the area of resonant dielectric nanostructures have created attractive opportunities for concentrating and manipulating light at the nanoscale and the establishment of the new exciting field of all-dielectric nanophotonics. Transition metal dichalcogenides (TMDCs) with nanopatterned surfaces are especially promising for these tasks. Still, the fabrication of these structures requires sophisticated lithographic processes, drastically complicating application prospects. To bridge this gap and broaden the application scope of TMDC nanomaterials, we report here femtosecond laser-ablative fabrication of water-dispersed spherical TMDC (MoS₂ and WS₂) nanoparticles (NPs) of variable size (5 to 250 nm). Such NPs demonstrate exciting optical and electronic properties inherited from TMDC crystals, due to preserved crystalline structure, which offers a unique combination of pronounced excitonic response and high refractive index value, making possible a strong concentration of electromagnetic field in the NPs. Furthermore, such NPs offer additional tunability due to hybridization between the Mie and excitonic resonances. Such properties bring to life a number of nontrivial effects, including enhanced photoabsorption and photothermal conversion. As an illustration, we demonstrate that the NPs exhibit a very strong photothermal response, much exceeding that of conventional dielectric nanoresonators based on Si. Being in a mobile colloidal state and exhibiting superior optical properties compared to other dielectric resonant structures, the synthesized TMDC NPs offer opportunities for the development of next-generation nanophotonic and nanotheranostic platforms, including photothermal therapy and multimodal bioimaging.

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.

Ultrasmall Molybdenum Disulfide Quantum Dots Cage Alzheimer's Amyloid Beta to Restore Membrane Fluidity

Alzheimer's disease (AD) is a major cause of dementia characterized by the overexpression of transmembrane amyloid precursor protein and its neurotoxic byproduct amyloid beta (Aβ). A small peptide of considerable hydrophobicity, Aβ is aggregation prone catalyzed by the presence of cell membranes, among other environmental factors. Accordingly, current AD mitigation strategies often aim at breaking down the Aβ-membrane communication, yet no data is available concerning the cohesive interplay of the three key entities of the cell membrane, Aβ, and its inhibitor. Using a lipophilic Laurdan dye and confocal fluorescence microscopy, we observed cell membrane perturbation and actin reorganization induced by Aβ oligomers but not by Aβ monomers or amyloid fibrils. We further revealed recovery of membrane fluidity by ultrasmall MoS2 quantum dots, also shown in this study as a potent inhibitor of Aβ amyloid aggregation. Using discrete molecular dynamics simulations, we uncovered the binding of MoS2 and Aβ monomers as mediated by hydrophilic interactions between the quantum dots and the peptide N-terminus. In contrast, Aβ oligomers and fibrils were surface-coated by the ultrasmall quantum dots in distinct testudo-like, reverse protein-corona formations to prevent their further association with the cell membrane and adverse effects downstream. This study offers a crucial new insight and a viable strategy for regulating the amyloid aggregation and membrane-axis of AD pathology with multifunctional nanomedicine.

Molybdenum-based hetero-nanocomposites for cancer therapy, diagnosis and biosensing application: Current advancement and future breakthroughs

In recent years, there have been significant advancements in the nanotechnology for cancer therapy. Even though molybdenum disulphide (MoS2)-based nanocomposites demonstrated extensive applications in biosensing, bioimaging, phototherapy, the review article focusing on MoS2 nanocomposite platform has not been accounted for yet. The review summarizes recent strategies on design and fabrication of MoS2-based nanocomposites and their modulated properties in cancer treatment. The review also discussed several therapeutic strategies (photothermal, photodynamic, immunotherapy, gene therapy and chemotherapy) and their combinations for efficient cancer therapy along with certain case studies. The review also inculcates various diagnostic techniques viz. magnetic resonance imaging, computed tomography, photoacoustic imaging and fluorescence imaging for diagnosis of cancer.

Potential toxicity mechanism of MoS2 nanotube in the interaction between YAP65 WW domain and PRM

With the widespread application of Molybdenum disulfide (MoS₂) in biomedicine, its mechanism of action with biomolecules has attracted increasing attention. Herein, molecular dynamics simulations were performed to investigate the effect of MoS₂ nanotube on the binding of the signal protein YAP65, an important Yes kinase-associated protein domain (WW domain), to the proline rich motif ligand (PRM). We designed four systems based on the different initial binding modes among WW domain, PRM and MoS₂ nanotube, and observed two ways to affect the binding of WW domain to PRM. The first pathway, the active site in WW domain was occupied by MoS₂ nanotube, which prevents WW domain from binding to PRM. In the second pathway, WW domain was bound to PRM with residues W17 and F29 instead of the two highly conserved residues (Y28 and W39), forming an unstable combination. These two results might cause WW domain to lose its original function or to pass the mistaken signal. However, MoS₂ nanotube did not destroy the structure and binding of WW domain and PRM in the composite. These findings shed light on the interaction between MoS₂ nanotube and signal protein system, while providing another valuable insight into the potential nanotoxicity of MoS₂ nanotube.

Synthesis and characterization of molybdenum disulfide nanoparticles in Shewanella oneidensis MR-1 biofilms

Shewanella oneidensis MR-1 is a dissimilatory metal-reducing bacterium capable of reducing various metal and sulfur compounds and precipitating them in nanoparticulate form. Here, we report the synthesis of molybdenum disulfide nanomaterials at the site of S. oneidensis biofilms grown in the presence of molybdenum trioxide and sodium thiosulfate. Samples from the growth medium were imaged using scanning electron microscopy and characterized using transmission electron microscopy, energy-dispersive x-ray spectroscopy, absorbance spectroscopy, and x-ray diffraction. These methods revealed the presence of molybdenum disulfide nanoparticle aggregates 50-300 nm in diameter with both hexagonal and rhombohedral polytypes. As a biosynthesis method for molybdenum sulfide, the use of S. oneidensis offers the advantage of significantly reduced heat and chemical solvent input compared to conventional methods of synthesizing molybdenum disulfide nanoparticles.

Comparative analysis of biological effects of molybdenum(IV) sulfide in the form of nano- and microparticles on human hepatoma HepG2 cells grown in 2D and 3D models

Significance of MoS₂ nanoparticles as a lubricant or drug carriers indicates the need to assess their safety. In the study we analyzed the effects of MoS₂ nano- and microparticles and their internalization in vitro, using 2D and 3D culture models of human hepatoma HepG2 cell line. MoS₂ micro- and nanoparticles were characterized with high resolution electron microscopy (HR-SEM), X-ray diffraction (XRD) and Energy Dispersive X-Ray Spectroscopy (EDS). The cells were exposed to a range of concentrations of the nano-and microparticles suspensions (maximum of 250 μg/mL) for 72 h. Cell viability was assessed using WST-1 reduction test and LDH release assay. Particle internalization was analyzed using scanning transmission electron microscopy (STEM). The nanoparticles were internalized into the 2D and 3D cultured cells, in spheroids more efficiently into the outer layer. For microparticles mainly particles of less than 1 μm in diameter underwent internalization. This process, however, did not affect cell viability as measured with the WST-1 and LDH assays. STEM observation showed well preserved integrity of the cell membrane and no apparent cytotoxic effect. Although the particles seemed to be safely sequestered in vacuoles or the cytoplasm, their fate and eventual biological effects are not certain and deserve further studies.

1% defect enriches MoS2 quantum dot: catalysis and blue luminescence

Defects in solids are typically recognized as unfavorable, leading to degradation of the structure and properties of the material. However, defects occasionally provide extraordinary benefits as the active sites of catalysts and chemical reactions, and can result in the creation of new electronic states. In particular, a low-dimensional material can become a defect-rich material due to the unique ratio of surface area to volume, giving many dangling bonds. Herein, we report the rapid (20 min) synthesis of MoS₂ quantum dots (QDs) with a diameter of 4 nm at room temperature using nanosecond pulsed laser ablation in a binary solvent. The MoS₂ QDs are crystalline particles composed of 3-5 layers and contain sulfur vacancies at an atomic concentration of 1% acting as a functional defect. The MoS₂ QDs exhibit excellent electrocatalytic performance (Tafel slope = 49 mV dec^-1) for the hydrogen evolution reaction and high quantum yield blue photoluminescence with a large Stokes shift.

Probing Multiphased Transition in Bulk MoS2 by Direct Electron Injection

Structural phase transitions in layered two-dimensional (2D) materials are of significant interest owing to their ability to exist in multiple metastable states with distinctive properties. However, phase transition in bulk MoS₂ by nondestructive electron infusion has not yet been realized. In this study, we report the 2H to 1T' phase transition and in-between intermediates in bulk MoS₂ using MoS₂/[Ca₂N]⁺·e^- heterostructures, in which kinetic free electrons were directly injected into MoS₂. We observed various phases in MoS₂ ranging from heavily doped 2H to a distorted lattice state and then on to a complete 1T' state. Snapshots of the multiphase transition were captured by extraordinary Raman shift and bandgap reduction and were further elucidated by theoretical calculations. We also observed a weakening in interlayer coupling in the vicinity of the metallic regime, which led to an unusually strong photoluminescence emission, suggesting light-efficient bulk MoS₂. Our results thus suggest the optoelectronic applications that can fully utilize the multiphase transition of bulk 2D materials.

Alloy, Janus and core-shell nanoparticles: numerical modeling of their nucleation and growth in physical synthesis

While alloy, core-shell and Janus binary nanoclusters are found in more and more technological applications, their formation mechanisms are still poorly understood, especially during synthesis methods involving physical approaches. In this work, we employ a very simple model of such complex systems using Lennard-Jones interactions and inert gas quenching. After demonstrating the ability of the model to well reproduce the formation of alloy, core-shell or Janus nanoparticles, we studied their temporal evolution from the gas via droplets to nanocrystalline particles. In particular, we showed that the growth mechanisms exhibit qualitative differences between these three chemical orderings. Then, we determined how the quenching rate can be used to finely tune structural characteristics of the final nanoparticles, including size, shape and crystallinity.

Enhanced Osteogenesis by Molybdenum Disulfide Nanosheet Reinforced Hydroxyapatite Nanocomposite Scaffolds

The advances in the arena of biomedical engineering enable us to fabricate novel biomaterials that provide a suitable platform for rapid bone regeneration. Herein, we have investigated the in vitro and in vivo osteogenic differentiation, proliferation, and bone regeneration capability of molybdenum disulfide nanosheets (MoS₂NSs) reinforced HAP nanocomposite scaffolds. The MG-63 cells were incubated with HAP and HAP/MoS₂NSs nanocomposite and followed for various cellular activities. The cells incubated with HAP@2 shows higher cell adhesion, cell proliferation, and alkaline phosphatase activity (ALP) in contrast to HAP. The in vivo and in vitro results of the increased ALP level confirm that HAP@2 promotes osteogenic differentiation. This improved osteogenesis was validated with upregulation of osteogenic marker viz. transcription factor, RUNX-2 (∼34 fold), collagen-1 (∼15 fold), osteopontin (∼11 fold), osteocalcin (∼20 fold), and bone morphogenetic protein-2 (∼12 fold) after 12 week postimplantation in comparison to drilled. The X-ray imaging demonstrates that HAP@2 implants promote rapid osteogenesis and bioresorbability than HAP and drilled. The outcomes of the present study provide a promising tool for the regeneration of bone deformities, without using any external growth factor.

Fullerene-like MoS2 Nanoparticles as Cascade Catalysts Improving Lubricant and Antioxidant Abilities of Artificial Synovial Fluid

Intraarticular injection of hyaluronic acid (HA) for viscosupplementation is a nonsurgical therapy for osteoarthritis (OA). However, HA fails to lubricate under a significant load and tends to be depolymerized by the overproduction of reactive oxygen species (ROS) in inflammation. Here, we for the first time reported that fullerene-like MoS₂ (F-MoS₂) nanoparticles are efficient lubricants and antioxidants for artificial synovial fluid. A model of arthrosis was built, to evaluate the tribological behavior of F-MoS₂ nanoparticles. The tests showed that they significantly improve the antiwear and friction-reducing abilities of the artificial synovial fluid. More importantly, the F-MoS₂ nanoparticles possess intrinsic dual-enzyme-like activity, mimicking superoxide dismutases (SOD) and catalases (CAT) under physiological conditions (pH 7.4, 25 °C). By coupling of these unique properties, a self-organized cascade catalytic system was constructed, which includes the disproportionation of superoxide radicals (O₂^•-) to hydrogen peroxide (H₂O₂) and subsequently the disproportionation of H₂O₂ into oxygen (O₂). The effectiveness of the detox system was evaluated by human umbilical vein endothelial cells (HUVEC) models exposed to oxidative stress. After that, F-MoS₂ nanoparticles were used to regulate the ROS level in artificial synovial fluid containing HA. Relative viscosity measurements showed the excellent protective effect of F-MoS₂ nanoparticles against HA oxidative damage offered by O₂^•-. These results indicate that F-MoS₂ nanoparticles are promising candidates for treatment of OA and other diseases caused by lubrication deficiency or oxidative stress.

Advances in nanomaterials for use in photothermal and photodynamic therapeutics (Review)

Nanomaterials play crucial roles in the diagnosis and treatment of diseases. Photothermal and photodynamic therapy, as two minimally invasive therapeutic methods, have promising potential in the diagnosis and prevention of cancer. Recently, many photothermal materials (such as noble metal material, transition metal sulfur oxides, carbon material and upconversion nanomaterial) and photodynamic materials (such as phthalein cyanogen, porphyrins and other dye molecules) have been applied in photothermal therapy (PTT) and photodynamic therapy (PDT). Moreover, as nanomaterials have suitable biocompatibility, these materials have been applied in cancer therapy. In the present review, we summarized the effects of different material types, synthesis methods, material morphologies and surface modifications on the outcomes of cancer therapy. The application of nanomaterials in PTT and PDT was introduced and the advantages and disadvantages of PTT and PDT in the prevention of cancer were discussed. Finally, we discussed the application of nanomaterials in the combination of PTT and PDT in cancer treatment.

Potential blockade of the human voltage-dependent anion channel by MoS2 nanoflakes

Despite significant interest in molybdenum disulfide (MoS2) nanomaterials, particularly in biomedicine, their biological effects have been understudied. Here, we explored the effect of MoS2 nanoflakes on the ubiquitous mitochondrial porin voltage-dependent anion channel (VDAC1), using a combined computational and functional approach. All-atomic molecular dynamics simulations suggest that MoS2 nanoflakes make specific contact interactions with human VDAC1. We show that the initial contacts between hVDAC1 and the nanoflake are hydrophobic but are subsequently enhanced by a complex interplay of van der Waals (vdW), hydrophobic and electrostatic interactions in the equilibrium state. Moreover, the MoS2 nanoflake can insert into the lumen of the hVDAC1 pore. Free-energy calculations computed by the potential of mean force (PMF) verify that the blocked configuration of the MoS2-hVDAC1 complex is more energetically favorable than the non-blocked binding mode. Consistent with these predictions, we showed that MoS2 depolarizes the mitochondrial membrane potential (Ψm) and causes a decrease in the viability of mammalian tissue culture cells. These findings might shed new light on the potential biological effect of MoS2 nanomaterials.

Tungsten disulfide-based nanocomposites for photothermal therapy

Nanostructures of transition-metal dichalcogenides (TMDC) have raised scientific interest in the last few decades. Tungsten disulfide (WS2) nanotubes and nanoparticles are among the most extensively studied members in this group, and are used for, e.g., polymer reinforcement, lubrication and electronic devices. Their biocompatibility and low toxicity make them suitable for medical and biological applications. One potential application is photothermal therapy (PTT), a method for the targeted treatment of cancer, in which a light-responsive material is irradiated with a laser in the near-infrared range. In the current article we present WS2 nanotubes functionalized with previously reported ceric ammonium nitrate-maghemite (CAN-mag) nanoparticles, used for PTT. Functionalization of the nanotubes with CAN-mag nanoparticles resulted in a magnetic nanocomposite. When tested in vitro with two types of cancer cells, the functionalized nanotubes showed a better PTT activity compared to non-functionalized nanotubes, as well as reduced aggregation and the ability to add a second-step functionality. This ability is demonstrated here with two polymers grafted onto the nanocomposite surface, and other functionalities could be additional cancer therapy agents for achieving increased therapeutic activity.

Unveiling the Structure of MoS x Nanocrystals Produced upon Laser Fragmentation of MoS2 Platelets

Transition-metal dichalcogenide MoS₂ nanostructures have attracted tremendous attention due to their unique properties, which render them efficient nanoscale functional components for multiple applications ranging from sensors and biomedical probes to energy conversion and storage devices. However, despite the wide application range, the possibility to tune their size, shape, and composition is still a challenge. At the same time, the correlation of the structure with the optoelectronic properties is still unresolved. Here, we propose a new method to synthesize various morphologies of molybdenum sulfide nanocrystals, on the basis of ultrashort-pulsed laser fragmentation of MoS₂ platelets. Depending on the irradiation conditions, multiple MoS _x morphologies in the form of nanoribbons, nanospheres, and photoluminescent quantum dots are obtained. Besides the detailed structural analysis of the various crystals formed, the structure-property relation is investigated and discussed.

MoO3-x nanodots with dual enzyme mimic activities as multifunctional modulators for amyloid assembly and neurotoxicity

Development of effective inhibitors toward Aβ aggregation and reactive oxygen species (ROS) scavengers are of crucial therapeutic implications for Alzheimer's disease (AD). Herein, a novel agent with dual enzyme mimic activities has been fabricated as a multifunctional Aβ fibrillation modulator. MoO_3-x nanodots were synthesized by pulsed laser ablation (PLA) method in MoS₂ nanosheets solutions, which may act directly as numerous fine targets. MoO_3-x nanodots showed a uniform and monodispersed morphology, and the tiny dots were around 3-5 nm with a narrow size distribution. Due to the efficient charge transition between Mo⁵⁺/Mo⁶⁺ on the dots surface, MoO_3-x nanodots exhibited excellent catalase and SOD mimic activities, which were adopted to alleviate Aβ-mediated oxidative stress. Moreover, MoO_3-x nanodots can efficiently inhibit Aβ aggregation and destabilize the preformed fibrils, and eventually protect neuronal cells from apoptosis induced by Aβ. Taken together, MoO_3-x nanodots with multifunctional roles can act as a potential therapeutic strategy for treatment of amyloid induced neurotoxicity.

Impact of functional inorganic nanotubes f-INTs-WS2 on hemolysis, platelet function and coagulation

Inorganic transition metal dichalcogenide nanostructures are interesting for several biomedical applications such as coating for medical devices (e.g. endodontic files, catheter stents) and reinforcement of scaffolds for tissue engineering. However, their impact on human blood is unknown. A unique nanomaterial surface-engineering chemical methodology was used to fabricate functional polyacidic polyCOOH inorganic nanotubes of tungsten disulfide towards covalent binding of any desired molecule/organic species via chemical activation/reactivity of this former polyCOOH shell. The impact of these nanotubes on hemolysis, platelet aggregation and blood coagulation has been assessed using spectrophotometric measurement, light transmission aggregometry and thrombin generation assays. The functionalized nanotubes do not induce hemolysis but decrease platelet aggregation and induce coagulation through intrinsic pathway activation. The functional nanotubes were found to be more thrombogenic than the non-functional ones, suggesting lower hemocompatibility and increased thrombotic risk with functionalized tungsten disulfide nanotubes. These functionalized nanotubes should be used with caution in blood-contacting devices.

Highly Sensitive and Flexible Strain-Pressure Sensors with Cracked Paddy-Shaped MoS2/Graphene Foam/Ecoflex Hybrid Nanostructures

Three-dimensional graphene porous networks (GPNs) have received considerable attention as a nanomaterial for wearable touch sensor applications because of their outstanding electrical conductivity and mechanical stability. Herein, we demonstrate a strain-pressure sensor with high sensitivity and durability by combining molybdenum disulfide (MoS₂) and Ecoflex with a GPN. The planar sheets of MoS₂ bonded to the GPN were conformally arranged with a cracked paddy shape, and the MoS₂ nanoflakes were formed on the planar sheet. The size and density of the MoS₂ nanoflakes were gradually increased by raising the concentration of (NH₄)₂MoS₄. We found that this conformal nanostructure of MoS₂ on the GPN surface can produce improved resistance variation against external strain and pressure. Consequently, our MoS₂/GPN/Ecoflex sensors exhibited noticeably improved sensitivity compared to previously reported GPN/polydimethylsiloxane sensors in a pressure test because of the existence of the conformal planar sheet of MoS₂. In particular, the MoS₂/GPN/Ecoflex sensor showed a high sensitivity of 6.06 kPa^-1 at a (NH₄)₂MoS₄ content of 1.25 wt %. At the same time, it displayed excellent durability even under repeated loading-unloading pressure and bending over 4000 cycles. When the sensor was attached on a human temple and neck, it worked correctly as a drowsiness detector in response to motion signals such as neck bending and eye blinking. Finally, a 3 × 3 tactile sensor array showed precise touch sensing capability with complete isolation of electrodes from each other for application to touch electronic applications.

Inorganic fullerene-like molybdenum selenide with good biocompatibility synthesized by laser ablation in liquids

The fabrication of inorganic fullerene-like nanoparticles (IFNPs) is an attractive idea due to their unique structures and various potential applications. To date, IFNPs have been made from numerous compounds with layered two-dimensional structures, based on various synthetic methods. Here we have demonstrated for the first time that inorganic fullerene-like molybdenum selenide nanoparticles (MoSe₂ IFNPs) can be synthesized by laser ablating a molybdenum selenide target in 30 vol % ethanol/water mixture at ambient temperature and pressure. The formation mechanism was proposed to elucidate the production of MoSe₂ IFNPs in the process of laser ablation in liquids (LAL). The appropriate solvent facilitates the condensation of the plasma plume created by LAL to planar MoSe₂. Then, laser-induced high temperature and high pressure lead to the formation of a vacancy in the planar MoSe₂, causing the generation of nucleation and growth of the MoSe₂ IFNPs. In addition, a CCK-8 (cell counting kit-8) assay and a cell viability assay were performed to examine the cytotoxic behavior and the effect on cell viability of MoSe₂ IFNPs. The results show that MoSe₂ IFNPs are reasonably nontoxic and biocompatible with the given cells, showing they have significant potential in biomedical applications.

Two-Dimensional MoS2-Based Zwitterionic Hydrophilic Interaction Liquid Chromatography Material for the Specific Enrichment of Glycopeptides

Mass spectrometry (MS)-based glycoproteomics research requires highly efficient sample preparation to eliminate interference from non-glycopeptides and to improve the efficiency of glycopeptide detection. In this work, a novel MoS₂/Au-NP (gold nanoparticle)-L-cysteine nanocomposite was prepared for glycopeptide enrichment. The two-dimensional (2D) structured MoS₂ nanosheets served as a matrix that could provide a large surface area for immobilizing hydrophilic groups (such as L-cysteine) with low steric hindrance between the materials and the glycopeptides. As a result, the novel nanomaterial possessed an excellent ability to capture glycopeptides. Compared to commercial zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC) materials, the novel nanomaterials exhibited excellent enrichment performance with ultrahigh selectivity and sensitivity (approximately 10 fmol), high binding capacity (120 mg g^-1), high enrichment recovery (more than 93%), satisfying batch-to-batch reproducibility, and good universality for glycopeptide enrichment. In addition, its outstanding specificity and efficiency for glycopeptide enrichment was confirmed by the detection of glycopeptides from an human serum immunoglobulin G (IgG) tryptic digest in quantities as low as a 1:1250 molar ratio of IgG tryptic digest to bovine serum albumin tryptic digest. The novel nanocomposites were further used for the analysis of complex samples, and 1920 glycopeptide backbones from 775 glycoproteins were identified in three replicate analyses of 50 μg of proteins extracted from HeLa cell exosomes. The resulting highly informative mass spectra indicated that this multifunctional nanomaterial-based enrichment method could be used as a promising tool for the in-depth and comprehensive characterization of glycoproteomes in MS-based glycoproteomics.

CVD-grown monolayer MoS2 in bioabsorbable electronics and biosensors

Transient electronics represents an emerging technology whose defining feature is an ability to dissolve, disintegrate or otherwise physically disappear in a controlled manner. Envisioned applications include resorbable/degradable biomedical implants, hardware-secure memory devices, and zero-impact environmental sensors. 2D materials may have essential roles in these systems due to their unique mechanical, thermal, electrical, and optical properties. Here, we study the bioabsorption of CVD-grown monolayer MoS₂, including long-term cytotoxicity and immunological biocompatibility evaluations in biofluids and tissues of live animal models. The results show that MoS₂ undergoes hydrolysis slowly in aqueous solutions without adverse biological effects. We also present a class of MoS₂-based bioabsorbable and multi-functional sensor for intracranial monitoring of pressure, temperature, strain, and motion in animal models. Such technology offers specific, clinically relevant roles in diagnostic/therapeutic functions during recovery from traumatic brain injury. Our findings support the broader use of 2D materials in transient electronics and qualitatively expand the design options in other areas.

Transient electronics entails the capability of electronic components to dissolve or reabsorb in a controlled manner when used in biomedical implants. Here, the authors perform a systematic study of the processes of hydrolysis, bioabsorption, cytotoxicity and immunological biocompatibility of monolayer MoS₂.

Nanomaterials in dentistry: a cornerstone or a black box?

Aim: The studies on tooth structure provided basis for nanotechnology-based dental treatment approaches known as nanodentistry which aims at detection and treatment of oral pathologies, such as dental caries and periodontal diseases, insufficiently being treated by conventional materials or drugs. This review aims at defining the role of nanodentistry in the medical area, its potential and hazards. Materials & methods: To validate these issues, current literature on nanomaterials for dental applications was critically reviewed. Results: Nanomaterials for teeth restoration, bone regeneration and oral implantology exhibit better mechanical properties and provide more efficient esthetic outcome. However, still little is known about influence of long-term function of such biomaterials in the living organism. Conclusion: As application of nanomaterials in industry and medical-related sciences is still expanding, more information is needed on how such nano-dental materials may interfere with oral cavity, GI tract and general health.

Nanocomposites based on tubular and onion nanostructures of molybdenum and tungsten disulfides: inorganic design, functional properties and applications

The review concerns the development and the state-of-the-art in studies on the surface modification methods aimed at fabricating promising nanocomposites based on multilayer inorganic tubular and onion (fullerene-like) MoS2 and WS2 nanostructures. The synthetic details and structural features of these materials are considered. Considerable attention is paid to targeted functionalization of molybdenum and tungsten disulfide nanostructures and to fundamental principles that underlie their ability to chemical interactions. The functional properties and applications of the obtained materials are described.

The bibliography includes 183 references.

Molybdenum Disulfide Nanoparticles Resist Oxidative Stress-Mediated Impairment of Autophagic Flux and Mitigate Endothelial Cell Senescence and Angiogenic Dysfunctions

The impairment of autophagy involves oxidative stress-induced cellular senescence, leading to endothelial dysfunctions and the onset of cardiovascular diseases. As molybdenum disulfide nanoparticles (MoS₂ NPs), representative transition metal dichacogenide materials, have great potential as a multifunctional therapeutic agent against various disorders, the present study aimed to investigate whether MoS₂ NPs prevents hydrogen peroxide (H₂O₂)-induced endothelial senescence by modulating autophagic process. Our results showed that pretreatment with MoS₂ NPs inhibited H₂O₂-induced endothelial senescence and improved endothelial functions. Exposure of H₂O₂ increased p62 level and blocked the fusion of autophagosomes with lysosomes, indicating of impaired autophagic flux in senescent endothelial cells. However, MoS₂ NPs pretreatment efficiently suppressed cellular senescence through triggering autophagy and resisting impaired autophagic flux. Furthermore, the genetic inhibition of autophagy by siRNA against Beclin 1 or ATG-5 directly abrogated the protective action of MoS₂ NPs on endothelial cells against H₂O₂-induced senescence.Thus, these results suggested that MoS₂ NPs rescue endothelial cells from H₂O₂-induced senescence by improving autophagic flux, and provide valuable information for the rational design of MoS₂-based nanomaterials for therapeutic use in senescence-related diseases.

Quercetin nanoparticles with enhanced bioavailability as multifunctional agents toward amyloid induced neurotoxicity

Quercetin nanoparticles fabricated by pulsed laser ablation showed enhanced bioavailability and multifunctional effects on amyloid-β mediated neurotoxicity.

Universal liquid-phase laser fabrication of various nano-metals encapsulated by ultrathin carbon shells for deep-UV plasmonics

The exploration of localized surface plasmon resonance (LSPR) beyond the usual visible waveband, for example within the ultraviolet (UV) or deep-ultraviolet (D-UV) regions, is of great significance due to its unique applications in secret communications and optics. However, it is still challenging to universally synthesize the corresponding metal nanostructures due to their high activity. Herein, we report a universal, eco-friendly, facile and rapid synthesis of various nano-metals encapsulated by ultrathin carbon shells, significantly with a remarkable deep-UV LSPR characteristic, via a liquid-phase laser fabrication method. Firstly, a new generation of the laser ablation in liquid (LAL) method has been developed with an emphasis on the elaborate selection of solvents to generate ultrathin carbon shells, and hence to stabilize the formed metal nanocrystals. As a result, a series of metal@carbon nanoparticles (NPs), including Cr@C, Ti@C, Fe@C, V@C, Al@C, Sn@C, Mn@C and Pd@C, can be fabricated by this modified LAL method. Interestingly, these NPs exhibit LSPR peaks in the range of 200-330 nm, which are very rare for localized surface plasmon resonance. Consequently, the UV plasmonic effects of these metal@carbon NPs were demonstrated both by the observed enhancement in UV photoluminescence (PL) from the carbon nanoshells and by the improvement of the photo-responsivity of UV GaN photodetectors. This work could provide a universal method for carbon shelled metal NPs and expand plasmonics into the D-UV waveband.

Molybdenum Disulfide Nanoparticles as Multifunctional Inhibitors against Alzheimer's Disease

The complex pathogenic mechanisms of Alzheimer's disease (AD) include the aggregation of β-amyloid peptides (Aβ) into oligomers or fibrils as well as Aβ-mediated oxidative stress, which require comprehensive treatment. Therefore, the inhibition of Aβ aggregation and free-radical scavenging are essential for the treatment of AD. Nanoparticles (NPs) have been found to influence Aβ aggregation process in vitro. Herein, we report the inhibition effects of molybdenum disulfide (MoS₂) NPs on Aβ aggregation. Polyvinylpyrrolidone-functionalized MoS₂ NPs were fabricated by a pulsed laser ablation method. We find that MoS₂ NPs exhibit multifunctional effects on Aβ peptides: inhibiting Aβ aggregation, destabilizing Aβ fibrils, alleviating Aβ-induced oxidative stress, as well as Aβ-mediated cell toxicity. Moreover, we show that MoS₂ NPs can block the formation of the Ca²⁺ channel induced by Aβ fibrils in the cell membrane for the first time. Thus, these observations suggest that MoS₂ NPs have great potential for a multifunctional therapeutic agent against amyloid-related diseases.

Comparative toxicity of Cd, Mo, and W sulphide nanomaterials toward E. coli under UV irradiation

In this study, the phototoxicity of cadmium sulfide (CdS), molybdenum disulfide (MoS₂), and tungsten disulfide (WS₂) nanoparticles (NPs) toward Escherichia coli (E. coli) under UV irradiation (365 nm) was investigated. At the same mass concentration of NPs, the toxicity of three NPs decreased in the order of CdS > MoS₂ > WS₂. For example, the death rates of E. coli exposed to 50 mg/L CdS, MoS₂, and WS₂ were 96.7%, 38.5%, and 31.2%, respectively. Transmission electron microscope and laser scanning confocal microscope images of E. coli exposed to three NPs showed the damage of cell walls and release of intracellular components. The CdS-treated cell wall was more extensively damaged than those of MoS₂-treated and WS₂-treated bacteria. WS₂ and MoS₂ generated superoxide radical (O₂^-), singlet oxygen (¹O₂), and hydroxyl radical under UV irradiation, CdS produced only O₂^- and ¹O₂. CdS and WS₂ released ions under UV irradiation, while MoS₂ did not. Reactive oxygen species (ROS) generation and toxic ion release jointly resulted in the antibacterial activities of CdS and WS₂. ROS generation was the dominant toxic mechanism of MoS₂ toward the bacteria. This study highlighted the importance of considering the hazardous effect of sulfide NPs after their release into natural waters under light irradiation condition.

Shape-Controllable Gold Nanoparticle-MoS2 Hybrids Prepared by Tuning Edge-Active Sites and Surface Structures of MoS2 via Temporally Shaped Femtosecond Pulses

Edge-active site control of MoS₂ is crucial for applications such as chemical catalysis, synthesis of functional composites, and biochemical sensing. This work presents a novel nonthermal method to simultaneously tune surface chemical (edge-active sites) and physical (surface periodic micro/nano structures) properties of MoS₂ using temporally shaped femtosecond pulses, through which shape-controlled gold nanoparticles are in situ and self-assembly grown on MoS₂ surfaces to form Au-MoS₂ hybrids. The edge-active sites with unbound sulfurs of laser-treated MoS₂ drive the reduction of gold nanoparticles, while the surface periodic structures of laser-treated MoS₂ assist the shape-controllable growth of gold nanoparticles. The proposed novel method highlights the broad application potential of MoS₂; for example, these Au-MoS₂ hybrids exhibit tunable and highly sensitive SERS activity with an enhancement factor up to 1.2 × 10⁷, indicating the marked potential of MoS₂ in future chemical and biological sensing applications.

Laser Synthesis and Processing of Colloids: Fundamentals and Applications

Driven by functionality and purity demand for applications of inorganic nanoparticle colloids in optics, biology, and energy, their surface chemistry has become a topic of intensive research interest. Consequently, ligand-free colloids are ideal reference materials for evaluating the effects of surface adsorbates from the initial state for application-oriented nanointegration purposes. After two decades of development, laser synthesis and processing of colloids (LSPC) has emerged as a convenient and scalable technique for the synthesis of ligand-free nanomaterials in sealed environments. In addition to the high-purity surface of LSPC-generated nanoparticles, other strengths of LSPC include its high throughput, convenience for preparing alloys or series of doped nanomaterials, and its continuous operation mode, suitable for downstream processing. Unscreened surface charge of LSPC-synthesized colloids is the key to achieving colloidal stability and high affinity to biomolecules as well as support materials, thereby enabling the fabrication of bioconjugates and heterogeneous catalysts. Accurate size control of LSPC-synthesized materials ranging from quantum dots to submicrometer spheres and recent upscaling advancement toward the multiple-gram scale are helpful for extending the applicability of LSPC-synthesized nanomaterials to various fields. By discussing key reports on both the fundamentals and the applications related to laser ablation, fragmentation, and melting in liquids, this Article presents a timely and critical review of this emerging topic.

Recent Advances in Synthesis and Biomedical Applications of Two-Dimensional Transition Metal Dichalcogenide Nanosheets

During recent decades, a giant leap in the development of nanotechnology has been witnessed. Numerous nanomaterials with different dimensions and unprecedented features have been developed and provided unimaginably wide scope to solve the challenging problems in biomedicine, such as cancer diagnosis and therapy. Recently, two-dimensional (2D) transition metal dichalcogenide (TMDC) nanosheets (NSs), including MoS₂ , WS₂ , and etc., have emerged as novel inorganic graphene analogues and attracted tremendous attention due to their unique structures and distinctive properties, and opened up great opportunities for biomedical applications, including ultrasensitive biosensing, biological imaging, drug delivery, cancer therapy, and antibacterial treatment. A comprehensive overview of different synthetic methods of ultrathin 2D TMDC NSs and their state-of-the-art biomedical applications, especially those that have appeared in the past few years, is presented. At the end of this review, the future opportunities and challenges for 2D TMDC NSs in biomedicine are also discussed.

Mechanism of ROS scavenging and antioxidant signalling by redox metallic and fullerene nanomaterials: Potential implications in ROS associated degenerative disorders

BACKGROUND

The balance between oxidation and anti-oxidation is believed to be critical in maintaining healthy biological systems. However, our endogenous antioxidant defense systems are incomplete without exogenous antioxidants and, therefore, there is a continuous demand for exogenous antioxidants to prevent stress and ageing associated disorders. Nanotechnology has yielded enormous variety of nanomaterials (NMs) of which metallic and carbonic (mainly fullerenes) NMs, with redox property, have been found to be strong scavengers of ROS and antioxidants in preclinical in vitro and in vivo models.

SCOPE OF REVIEW

Redox activity of metal based NMs and membrane translocation time of fullerene NMs seem to be the major determinants in ROS scavenging potential exhibited by these NMs. A comprehensive knowledge about the effects of ROS scavenging NMs in cellular antioxidant signalling is largely lacking. This review compiles the mechanisms of ROS scavenging as well as antioxidant signalling of the aforementioned metallic and fullerene NMs.

MAJOR CONCLUSIONS

Direct interaction between NMs and proteins does greatly affect the corona/adsorption formation dynamics but such interaction does not provide the explanation behind diverse biological outcomes induced by NMs. Indirect interaction, however, that could occur via NMs uptake and dissolution, NMs ROS induction and ROS scavenging property, and NMs membrane translocation time seem to work as a central mode of interaction.

GENERAL SIGNIFICANCE

The usage of potential antioxidant NMs in biological systems would greatly impact the field of nanomedicine. ROS scavenging NMs hold great promise in the future treatment of ROS related degenerative disorders.

Effect of Molybdenum Nanoparticles on Blood Cells, Liver Enzymes, and Sexual Hormones in Male Rats

Despite an increasing surge in application of nanoparticles in industries, there is a serious lack of information concerning their impact on human health and the environment. The present study investigated effects of molybdenum nanoparticles (Mo NPs) injected intraperitoneally into Sprague-Dawley rats at different doses of Mo NPs (5, 10, and 15 mg/kg BW per day) during a period of 28 days. Hematological and biochemical parameters as well as sexual hormones and histopathological examinations of the liver and testis were assessed and compared with control group. The results showed that the serum levels of testosterone decreased significantly in both groups of 10 and 15 mg (Mo NPs)/kg BW in comparison with the control group (p < 0.05). However, there were insignificant differences observed in luteinizing hormone (LH) levels and hematological parameters when compared with the control group (p > 0.05). The results of liver enzymes showed that serum levels of aspartate aminotransferase (AST) decreased significantly in both dosage groups of 5 and 10 mg/kg BW (Mo NPs) when compared with the control group (p < 0.05), and significant decrease obtained in lactate dehydrogenase (LDH) levels at dose of 5 mg/kg BW in comparison with the control group (p < 0.05). The histopathological examination of testis showed a decrease in number of Leydig cells. Also, the number of chronic inflammatory cells increased in portal triad and parenchyma in liver tissue of rats exposed to Mo NPs.