How the surface nanostructure of polyethylene affects protein assembly and orientation

Self-Assembled Block Copolymers as a Facile Pathway to Create Functional Nanobiosensor and Nanobiomaterial Surfaces

Block copolymer (BCP) surfaces permit an exquisite level of nanoscale control in biomolecular assemblies solely based on self-assembly. Owing to this, BCP-based biomolecular assembly represents a much-needed, new paradigm for creating nanobiosensors and nanobiomaterials without the need for costly and time-consuming fabrication steps. Research endeavors in the BCP nanobiotechnology field have led to stimulating results that can promote our current understanding of biomolecular interactions at a solid interface to the never-explored size regimes comparable to individual biomolecules. Encouraging research outcomes have also been reported for the stability and activity of biomolecules bound on BCP thin film surfaces. A wide range of single and multicomponent biomolecules and BCP systems has been assessed to substantiate the potential utility in practical applications as next-generation nanobiosensors, nanobiodevices, and biomaterials. To this end, this Review highlights pioneering research efforts made in the BCP nanobiotechnology area. The discussions will be focused on those works particularly pertaining to nanoscale surface assembly of functional biomolecules, biomolecular interaction properties unique to nanoscale polymer interfaces, functionality of nanoscale surface-bound biomolecules, and specific examples in biosensing. Systems involving the incorporation of biomolecules as one of the blocks in BCPs, i.e., DNA-BCP hybrids, protein-BCP conjugates, and isolated BCP micelles of bioligand carriers used in drug delivery, are outside of the scope of this Review. Looking ahead, there awaits plenty of exciting research opportunities to advance the research field of BCP nanobiotechnology by capitalizing on the fundamental groundwork laid so far for the biomolecular interactions on BCP surfaces. In order to better guide the path forward, key fundamental questions yet to be addressed by the field are identified. In addition, future research directions of BCP nanobiotechnology are contemplated in the concluding section of this Review.

Multiprotein Adsorption from Human Serum at Gold and Oxidized Iron Surfaces Studied by Atomic Force Microscopy and Polarization-Modulation Infrared Reflection Absorption Spectroscopy

Multiprotein adsorption from complex body fluids represents a highly important and complicated phenomenon in medicine. In this work, multiprotein adsorption from diluted human serum at gold and oxidized iron surfaces is investigated at different serum concentrations and pH values. Adsorption-induced changes in surface topography and the total amount of adsorbed proteins are quantified by atomic force microscopy (AFM) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRRAS), respectively. For both surfaces, stronger protein adsorption is observed at pH 6 compared to pH 7 and pH 8. PM-IRRAS furthermore provides some qualitative insights into the pH-dependent alterations in the composition of the adsorbed multiprotein films. Changes in the amide II/amide I band area ratio and in particular side-chain IR absorption suggest that the increased adsorption at pH 6 is accompanied by a change in protein film composition. Presumably, this is mostly driven by the adsorption of human serum albumin, which at pH 6 adsorbs more readily and thereby replaces other proteins with lower surface affinities in the resulting multiprotein film.

Rutile facet-dependent fibrinogen conformation: Why crystallographic orientation matters

Previous studies implied that single crystalline rutile surfaces have the ability to guide the functionality of adsorbed blood plasma proteins. However, a clear relation between the rutile crystallographic orientation and conformation of adsorbed proteins is still missing. Here, we examine the adsorption characteristics of human plasma fibrinogen (HPF) on atomically flat single rutile crystals with (110), (100), (101) and (001) facets. By direct visualization of individual protein molecules through atomic force microscopy (AFM) imaging, the distinct conformations of HPF were determined depending on rutile surface crystallographic orientation. In particular, dominant trinodular and globular conformation was found on (110) and (001) facets, respectively. The observed variations of HPF conformation were reasoned from the surface water contact angle and surface energy point of view. By analyzing AFM-based force measurements, statistically significant changes in surface energies of rutile surfaces covered with HPF were determined and linked to HPF conformation. Furthermore, the facet-dependent structural rearrangement of HPF was indirectly confirmed through deconvolution of high-resolution X-ray photoelectron spectroscopy (XPS) carbon and nitrogen spectra. The globular, and thus native-like HPF conformation observed on (001) facet, was reflected in the lowest level of amino group formation. We propose that the mechanism behind the crystallographic orientation-induced HPF conformation is driven by the facet-specific surface hydrophilicity and energy. From the biomedical material perspective, our results demonstrate that the conformation of HPF can be guided by controlling the crystallographic orientation of the underlying material surface. This might be beneficial to the field of titanium-based biomaterials design and development.

Protein-Polymer Interaction Characteristics Unique to Nanoscale Interfaces: A Perspective on Recent Insights

Protein interactions at polymer interfaces represent a complex but ubiquitous phenomenon that demands an entirely different focus of investigation than what has been attempted before. With the advancement of nanoscience and nanotechnology, the nature of polymer materials interfacing proteins has evolved to exhibit greater chemical intricacy and smaller physical dimensions. Existing knowledge built from studying the interaction of macroscopic, chemically alike surfaces with an ensemble of protein molecules cannot be simply carried over to nanoscale protein-polymer interactions. In this Perspective, novel protein interaction phenomena driven by the presence of nanoscale polymer interfaces are discussed. Being able to discern discrete protein interaction events via simple visualization was crucial to attaining the much needed, direct experimental evidence of protein-polymer interactions at the single biomolecule level. Spatial and temporal tracking of particular proteins at specific polymer interfaces was made possible by resolving individual proteins simultaneously with those polymer nanodomains responsible for the protein interactions. Therefore, such single biomolecule level approaches taken to examine protein-polymer interaction mark a big departure from the mainstream approaches of collecting indirectly observed, ensemble-averaged protein signals on chemically simple substrates. Spearheading research efforts so far has led to inspiring initial discoveries of protein interaction mechanisms and kinetics that are entirely unique to nanoscale polymer systems. They include protein self-assembly/packing characteristics, protein-polymer interaction mechanisms/kinetics, and various protein functionalities on polymer nanoconstructs. The promising beginning and future of nanoscale protein-polymer research endeavors are presented in this article.

How Nanotopography-Induced Conformational Changes of Fibrinogen Affect Platelet Adhesion and Activation

The conformational state of adsorbed human plasma fibrinogen (HPF) has been recognized as the determinant factor in platelet adhesion and thrombus formation on blood-contacting biomaterials. Studies have highlighted the ability to control the HPF conformation merely by tailoring surface nanotopographical features. However, a clear relationship between the conformational changes of adsorbed HPF and the degree of platelet adhesion and activation achieved with different surface nanotopographies is still unclear. Here, we examined HPF assembly characteristics on nanostructured polybutene-1 (PB-1) surfaces with nanosized lamellar crystals (LCs), needle-like crystals (NLCs), and a nanostructured high-density polyethylene (HDPE) surface with shish-kebab crystals (SKCs), at a biologically relevant HPF concentration. By exposing the nanostructured surfaces with preadsorbed HPF to human platelets, significant differences in platelet response on LCs/SKCs and NLCs were identified. The former presented a uniform monolayer in the advanced stage of activation, whereas the latter exhibited minimal adhesion and the early stage of activation. Distinct platelet response was related to the postadsorption conformational changes in HPF, which were confirmed by topography-dependent shifts of the amide I band in attenuated total reflection-Fourier transform infrared (ATR-FTIR) analysis. Supported by atomic force microscopy (AFM) characterization, we propose that the mechanism behind the nanotopography-induced HPF conformation is driven by the interplay between the aspect ratios of polymeric crystals and HPF. From the biomedical perspective, our work reveals that surface structuring in a nanoscale size regime can provide a fine-tuning mechanism to manipulate HPF conformation, which can be exploited for the design of thromboresistant biomaterials surfaces.

Confinement of Candida Antarctica Lipase B in a Multifunctional Cyclodextrin-Derived Silicified Hydrogel and Its Application as Enzymatic Nanoreactor

Supramolecular hydrogels with a three-dimensional cross-linked macromolecular network have attracted growing scientific interest in recent years because of their ability to incorporate high loadings of bioactive molecules such as drugs, proteins, antibodies, peptides, and genes. Herein, we report a versatile approach for the confinement of Candida antarctica lipase B (CALB) within a silica-strengthened cyclodextrin-derived supramolecular hydrogel and demonstrate its potential application in the selective oxidation of 2,5-diformylfuran (DFF) to 2,5-furandicarboxylic acid (FDCA) under mild conditions. The enzymatic nanoreactor was deeply characterized using thermogravimetric analysis, Fourier transform infrared spectroscopy, N₂-adsorption, dynamic light scattering, UV-visible spectroscopy, transmission electron microscopy, scanning electron microscopy, and confocal laser scanning microscopy, while the reaction products were established on the basis of ¹H nuclear magnetic resonance spectroscopy combined with high-performance liquid chromatography. Our results revealed that while CALB immobilized in conventional sol-gel silica yielded exclusively 5-formylfuran-2-carboxylic acid (FFCA), confinement of the enzyme in the silicified hydrogel imparted a 5-fold increase in DFF conversion and afforded 67% FDCA yield in 7 h and almost quantitative yields in less than 24 h. The hierarchically interconnected pore structure of the host matrix was found to provide a readily accessible diffusion path for reactants and products, while its flexible hydrophilic-hydrophobic interface was extremely beneficial for the interfacial activation of the immobilized lipase.

Chelating Surfaces for Oriented Human Serum Albumin Molecules

Protein immobilization in a specific conformation or orientation at an interface is influenced by specific interactions with the outer layer of the surface. A strategy to build-up a complex construct which is able to orient protein molecules, based on metal-cation chelation processes, is reported. The proposed methodology implies the formation of a mercaptoundecanoic acid monolayer on a gold surface that is activated to attach covalently the tripeptide glycyl-l-histidyl-l-lysine (GHK) on the surface, whose sites are then employed to chelate copper ions, providing a selective platform for the orientation of human serum albumin (HSA) molecules. The protein adsorption process on GHK and GHK-Cu(II)-complex surfaces was monitored by the in situ quartz crystal microbalance with dissipation monitoring (QCM-D) and force spectroscopy technique. The changes in frequency and dissipation factor as well as the D- f plots from QCM-D measurements help to characterize the changes in the protein conformation and are confirmed by force curve spectroscopy results. An improved kinetic model, based on random sequential adsorption with variable protein footprints, has been developed to predict and simulate the experimentally found HSA average surface coverage onto the GHK and GHK-Cu(II)-complex surfaces.

Nanoconfinement and Sansetsukon-like Nanocrawling Govern Fibrinogen Dynamics and Self-Assembly on Nanostructured Polymeric Surfaces

Surface nanostructures are increasingly more employed for controlled protein assembly on functional nanodevices, in nanobiotechnology, and in nanobiomaterials. However, the mechanism and dynamics of how nanostructures induce order in the adsorbed protein assemblies are still enigmatic. Here, we use single-molecule mapping by accumulated probe trajectories and complementary atomic force microscopy to shed light on the dynamic of in situ assembly of human plasma fibrinogen (HPF) adsorbed on nanostructured polybutene-1 (PB-1) and nanostructured polyethylene (PE) surfaces. We found a distinct lateral heterogeneity of HPF-polymer nanostructure interface (surface occupancy, residence time, and diffusion coefficient) that allow identifying the interplay between protein topographical nanoconfinement, protein diffusion mechanism, and ordered protein self-assembly. The protein diffusion analysis revealed high-diffusion polarization without correlation to the anisotropic friction characteristic of the polymer surfaces. This suggests that HPF molecules confined on the nanosized PB-1 needle crystals and PE shish-kebab crystals, respectively, undergo partial detachment and diffuse via a Sansetsukon-like nanocrawling mechanism. This mechanism is based on the intrinsic flexibility of HPF in the coiled-coil regions. We conclude that nanostructured surfaces that encourage this characteristic surface mobility are more likely to lead to the formation of ordered protein assemblies and may be useful for advanced nanobiomaterials.

Revealing the principal attributes of protein adsorption on block copolymer surfaces with direct experimental evidence at the single protein level

Understanding protein adsorption onto polymer surfaces is of great importance in designing biomaterials, improving bioanalytical devices, and controlling biofouling, to name a few examples. Although steady research efforts have been advancing this field, our knowledge of this ubiquitous and complex phenomenon is still limited. In this study, we elucidate competitive protein adsorption behaviors sequentially occurring onto nanoscale block copolymer (BCP) surfaces via combined experimental and computer simulation approaches. The model systems chosen for our investigation are immunoglobulin G and fibrinogen introduced in different orders into the self-assembled nanodomains of poly(styrene)-block-poly(methylmethacrylate). We unambiguously reveal the adsorption, desorption, and replacement events of the same protein molecules via single protein tracking with atomic force microscopy. We then ascertain adsorption-related behaviors such as lateral mobility and self-association of proteins. We provide the much-needed, direct experimental proof of sequential adsorption events at the biomolecular level, which was virtually nonexistent before. We determine key protein adsorption pathways and dominant tendencies of sequential protein adsorption. We also reveal preadsorbed surface-associated behaviors in sequential adsorption, distinct from situations involving initially empty surfaces. We perform Monte-Carlo simulations to further substantiate our experimental outcomes. Our endeavors in this study may facilitate a well-guided mechanistic understanding of protein-polymer interactions by providing definite experimental evidence of competitive, sequential adsorption at the nanoscale. Increasingly, biomaterial and biomedical applications rely on systems of multicomponent proteins and chemically intricate, nanoscale polymer surfaces. Hence, our findings can also be beneficial for the development of next-generation nanobiomaterials and nanobiosensors exploiting self-assembled BCP nanodomain surfaces.

Controlling Protein Adsorption through Nanostructured Polymeric Surfaces

The initial host response to healthcare materials' surfaces after implantation is the adsorption of proteins from blood and interstitial fluids. This adsorbed protein layer modulates the biological/cellular responses to healthcare materials. This stresses the significance of the surface protein assembly for the biocompatibility and functionality of biomaterials and necessitates a profound fundamental understanding of the capability to control protein-surface interactions. This review, therefore, addresses this by systematically analyzing and discussing strategies to control protein adsorption on polymeric healthcare materials through the introduction of specific surface nanostructures. Relevant proteins, healthcare materials' surface properties, clinical applications of polymer healthcare materials, fabrication methods for nanostructured polymer surfaces, amorphous, semicrystalline and block copolymers are considered with a special emphasis on the topographical control of protein adsorption. The review shows that nanostructured polymer surfaces are powerful tools to control the amount, orientation, and order of adsorbed protein layers. It also shows that the understanding of the biological responses to such ordered protein adsorption is still in its infancy, yet it has immense potential for future healthcare materials. The review, which is-as far as it is known-the first one discussing protein adsorption on nanostructured polymer surfaces, concludes with highlighting important current research questions.

Nanocrystal Width Controls Fibrinogen Orientation and Assembly Kinetics on Poly(butene-1) Surfaces

From the view of biomedical relevance, it is known that a specific arrangement of surface-immobilized human plasma fibrinogen (HPF) molecules is required to retain their biological functionality. Here, we demonstrate a topographical effect of chemically identical isotactic poly(butene-1) (iPB-1) semicrystalline nanostructures on the adsorption behavior, i.e., conformation change and orientation of HPF molecules. Using the distinct crystallization of iPB-1 under different shear conditions, polymer thin films consisting of needle-like crystals (NLCs) or shish-kebab crystals (SKCs) having lateral dimension, i.e., width, smaller than or comparable to the HPF major axis, respectively, were fabricated. The protein adsorption kinetic studies by quartz crystal microbalance with dissipation (QCM-D) revealed surface-dependent packing density and assembly configuration of HPF. High-resolution imaging disclosed a "side-on" protein adsorption and anisotropic network formation on the NLCs. With a 2-fold orientation analysis performed at both "single" protein and multiprotein levels, we quantitatively proved the preferential alignment of adsorbed HPF molecules with respect to the axial direction of the NLCs. Remarkably, the iPB-1 surface with SKCs perturbed the "end-to-end" protein-protein interactions and thus hindered the network formation. The distinguished adsorption behavior of HPF molecules on iPB-1 surfaces is explained by the physical effect of crystal width, which is additionally supported by the synergistic effect of crystal curvature and aspect ratio. Our studies provide fundamental insight into purely topography-controlled self-assembly of HPF molecules, which might be further exploited in creating topographically defined implant surfaces for preventing protein aggregation related disorders.

Confinement effect on the structure and elasticity of proteins interfacing polymers

The ordered nanostructured surfaces provide confined environments that allow functionalization of proteins. Here, we used the nanopores of poly(methyl methacrylate) films to attach fibrinogen and lysozyme, and discussed the changes in proteins' structures and elasticity upon confinement. Fourier-transform infrared spectroscopic analysis of protein secondary structures reveals that fibrinogen undergoes less structural change and behaves less stiff when the pore size is close to the protein size. Lysozyme, on the other hand, retains its native-like structure, however, it exhibits the highest modulus in 15 nm pores due to the lower macromolecular crowding effect the protein faces compared to lysozyme within larger pores. These findings manifest the effect of confinement and crowding on the conformation and elasticity of different shaped proteins tethered on surfaces.

pH-Dependent Ordered Fibrinogen Adsorption on Polyethylene Single Crystals

Nanostructured surfaces have the potential to influence the assembly as well as the orientation of adsorbed proteins and may, thus, strongly influence the biomaterials' performance. For the class of polymeric (bio)materials a reproducible and well-characterized nanostructure is the ordered chain folded surface of a polyethylene single crystal (PE-SC). We tested the hypothesis that the trinodal-rod-shaped protein human plasma fibrinogen (HPF) adsorbs on the (001) surface of PE-SCs along specific crystallographic directions. The PE-SC samples were prepared by isothermal crystallization in dilute solution and characterized by atomic force microscopy (AFM) before as well as after HPF adsorption at different concentrations and pH values. At a physiological pH of 7.4, connected HPF molecules, or e.g., fibrils, fibril networks, or sponge-like structures, were observed on PE-SC surfaces that featured no preferential orientation. The observation of these nonoriented multiprotein assemblies was explained by predominant protein-protein interactions and limited surface diffusion. However, at an increased pH of 9.2, single HPF molecules, e.g., spherical-shaped and trinodal-rod-shaped HPF molecules as well as agglomerates, were observed on the PE-SC surface. The presence of single HPF molecules at increased pH was explained by decreased protein-protein interactions. These single trinodal-rod-shaped HPF molecules oriented preferentially along crystallographic [100] and [010] directions on the PE-SC surface which was explained by an increased amount of intermolecular bonds along these crystallographic directions with increased surface atom density. The study established that HPF molecules can align on chemically homogeneous surface topographies one order of magnitude smaller than the dimension of the protein. This advances the understanding of how to control the assembly and orientation of proteins on nanostructured polymer surfaces. Controlled protein adsorption is a crucial key to improve the surface functionality of future implants and biosensors.

Ascertaining effects of nanoscale polymeric interfaces on competitive protein adsorption at the individual protein level

With the recent development of biomaterials and biodevices with reduced dimensionality, it is critical to comprehend protein adhesion processes to nanoscale solid surfaces, especially those occurring in a competitive adsorption environment. Complex sequences of adhesion events in competitive adsorption involving multicomponent protein systems have been extensively investigated, but our understanding is still limited primarily to macroscopic adhesion onto chemically simple surfaces. We examine the competitive adsorption behavior from a binary protein mixture containing bovine serum albumin and fibrinogen at the single protein level. We subsequently evaluate a series of adsorption and displacement processes occurring on both the macroscopic homopolymer and nanoscopic diblock copolymer surfaces, while systematically varying the protein concentration and incubation time. We identify the similarities and dissimilarities in competitive protein adsorption behavior between the two polymeric surfaces, the former presenting chemical uniformity at macroscale versus the latter exhibiting periodic nanointerfaces of chemically alternating polymeric segments. We then present our novel experimental finding of a large increase in the nanointerface-engaged residence time of the initially bound proteins and further explain the origin of this phenomenon manifested on nanoscale diblock copolymer surfaces. The outcomes of this study may provide timely insight into nanoscale competitive protein adsorption that is much needed in designing bioimplant and tissue engineering materials. In addition, the fundamental understanding gained from this study can be beneficial for the development of highly miniaturized biodevices and biomaterials fabricated by using nanoscale polymeric materials and interfaces.

Chelating Surfaces for Native State Proteins Patterning: The Human Serum Albumin Case

The paper reports a new "soft" surface functionalization strategy, based on a highly selective ion metal chelation process. The proposed stepwise methodology implies at first the construction of a monolayer of terpyridine-based thiol (Tpy), whose highly packed structuring has been followed in situ by using quartz crystal microbalance (QCM-D) measurements, showing that the monolayers consist of about 2.7 × 10(14) Tpy/cm(2). Then, the tridentate sites of the each Tpy moiety are employed to partially chelate divalent metal ions, providing an effective platform to anchoring proteins by completing the metal ion coordination with an available site on the protein of interest. We report the case study of the application of the process to the HSA immobilization onto various surfaces, including Tpy-Fe(II) and Tpy-Cu(II) complexes, as well as hydrophilic bare gold substrates and hydrophobic self-assembled Tpy-based monolayers. It is shown that the chelation interaction between Tpy-Cu(II) complexes and HSA produces the highest and most robust HSA immobilization, with an adsorbed mass at the steady state of ∼800 ng/cm(2), with respect to an average adsorption of ∼350 ng/cm(2) for the other surfaces. Furthermore, Cu(II)-chelated surfaces seem to promote a sort of protein "soft" landing, preventing the ubiquitous surface-induced major unfolding and transmitting an orientation information to the protein, owing to the highly specific symmetry coordination of the Tpy-Cu(II)-protein complex. Indeed, the interaction with a specific monoclonal antiboby (anti-HSA) indicated the lack of a significant protein denaturation, while a massive reorientation/denaturation process was found for all the remaining surfaces, including the Tpy-Fe(II) complex. Finally, the metal-ion-dependent HSA immobilization selectivity has been exploited to obtain micropatterned surfaces, based on the strikingly different strength of interaction and stability observed for Fe(II) and Cu(II) complexes.

Floating gate memory with charge storage dots array formed by Dps protein modified with site-specific binding peptides

We report a nanodot (ND) floating gate memory (NFGM) with a high-density ND array formed by a biological nano process. We utilized two kinds of cage-shaped proteins displaying SiO2 binding peptide (minTBP-1) on their outer surfaces: ferritin and Dps, which accommodate cobalt oxide NDs in their cavities. The diameters of the cobalt NDs were regulated by the cavity sizes of the proteins. Because minTBP-1 is strongly adsorbed on the SiO2 surface, high-density cobalt oxide ND arrays were obtained by a simple spin coating process. The densities of cobalt oxide ND arrays based on ferritin and Dps were 6.8 × 10(11) dots cm(-2) and 1.2 × 10(12) dots cm(-2), respectively. After selective protein elimination and embedding in a metal-oxide-semiconductor (MOS) capacitor, the charge capacities of both ND arrays were evaluated by measuring their C-V characteristics. The MOS capacitor embedded with the Dps ND array showed a wider memory window than the device embedded with the ferritin ND array. Finally, we fabricated an NFGM with a high-density ND array based on Dps, and confirmed its competent writing/erasing characteristics and long retention time.

Distinct adsorption configurations and self-assembly characteristics of fibrinogen on chemically uniform and alternating surfaces including block copolymer nanodomains

Understanding protein-surface interactions is crucial to solid-state biomedical applications whose functionality is directly correlated with the precise control of the adsorption configuration, surface packing, loading density, and bioactivity of protein molecules. Because of the small dimensions and highly amphiphilic nature of proteins, investigation of protein adsorption performed on nanoscale topology can shed light on subprotein-level interaction preferences. In this study, we examine the adsorption and assembly behavior of a highly elongated protein, fibrinogen, on both chemically uniform (as-is and buffered HF-treated SiO2/Si, and homopolymers of polystyrene and poly(methyl methacrylate)) and varying (polystyrene-block-poly(methyl methacrylate)) surfaces. By focusing on high-resolution imaging of individual protein molecules whose configurations are influenced by protein-surface rather than protein-protein interactions, fibrinogen conformations characteristic to each surface are identified and statistically analyzed for structural similarities/differences in key protein domains. By exploiting block copolymer nanodomains whose repeat distance is commensurate with the length of the individual protein, we determine that fibrinogen exhibits a more neutral tendency for interaction with both polystyrene and poly(methyl methacrylate) blocks relative to the case of common globular proteins. Factors affecting fibrinogen-polymer interactions are discussed in terms of hydrophobic and electrostatic interactions. In addition, assembly and packing attributes of fibrinogen are determined at different loading conditions. Primary orientations of fibrinogen and its rearrangements with respect to the underlying diblock nanodomains associated with different surface coverage are explained by pertinent protein interaction mechanisms. On the basis of two-dimensional stacking behavior, a protein assembly model is proposed for the formation of an extended fibrinogen network on the diblock copolymer.

A bottom-up approach to understanding protein layer formation at solid-liquid interfaces

A common goal across different fields (e.g. separations, biosensors, biomaterials, pharmaceuticals) is to understand how protein behavior at solid-liquid interfaces is affected by environmental conditions. Temperature, pH, ionic strength, and the chemical and physical properties of the solid surface, among many factors, can control microscopic protein dynamics (e.g. adsorption, desorption, diffusion, aggregation) that contribute to macroscopic properties like time-dependent total protein surface coverage and protein structure. These relationships are typically studied through a top-down approach in which macroscopic observations are explained using analytical models that are based upon reasonable, but not universally true, simplifying assumptions about microscopic protein dynamics. Conclusions connecting microscopic dynamics to environmental factors can be heavily biased by potentially incorrect assumptions. In contrast, more complicated models avoid several of the common assumptions but require many parameters that have overlapping effects on predictions of macroscopic, average protein properties. Consequently, these models are poorly suited for the top-down approach. Because the sophistication incorporated into these models may ultimately prove essential to understanding interfacial protein behavior, this article proposes a bottom-up approach in which direct observations of microscopic protein dynamics specify parameters in complicated models, which then generate macroscopic predictions to compare with experiment. In this framework, single-molecule tracking has proven capable of making direct measurements of microscopic protein dynamics, but must be complemented by modeling to combine and extrapolate many independent microscopic observations to the macro-scale. The bottom-up approach is expected to better connect environmental factors to macroscopic protein behavior, thereby guiding rational choices that promote desirable protein behaviors.

Interfacial protein-protein associations

While traditional models of protein adsorption focus primarily on direct protein-surface interactions, recent findings suggest that protein-protein interactions may play a central role. Using high-throughput intermolecular resonance energy transfer (RET) tracking, we directly observed dynamic, protein-protein associations of bovine serum albumin on polyethylene glycol modified surfaces. The associations were heterogeneous and reversible, and associating molecules resided on the surface for longer times. The appearance of three distinct RET states suggested a spatially heterogeneous surface - with areas of high protein density (i.e., strongly interacting clusters) coexisting with mobile monomers. Distinct association states exhibited characteristic behavior, i.e., partial-RET (monomer-monomer) associations were shorter-lived than complete-RET (protein-cluster) associations. While the fractional surface area covered by regions with high protein density (i.e., clusters) increased with increasing concentration, the distribution of contact times between monomers and clusters was independent of solution concentration, suggesting that associations were a local phenomenon, and independent of the global surface coverage.

Adsorption of multimeric T cell antigens on carbon nanotubes: effect on protein structure and antigen-specific T cell stimulation

Antigen-specific activation of cytotoxic T cells can be enhanced up to three-fold more than soluble controls when using functionalized bundled carbon nanotube substrates ((b) CNTs). To overcome the denaturing effects of direct adsorption on (b) CNTs, a simple but robust method is demonstrated to stabilize the T cell stimulus on carbon nanotube substrates through non-covalent attachment of the linker neutravidin.

Facets of protein assembly on nanostructured titanium oxide surfaces

One key for the successful integration of implants into the human body is the control of protein adsorption by adjusting the surface properties at different length scales. This is particularly important for titanium oxide, one of the most common biomedical interfaces. As for titania (TiO(2)) the interface is largely defined by its crystal surface structure, it is crucial to understand how the surface crystallinity affects the structure, properties and function of protein layers mediating subsequent biological reactions. For rutile TiO(2) we demonstrate that the conformation and relative amount of human plasma fibrinogen (HPF) and the structure of adsorbed HPF layers depend on the crystal surface nanostructure by employing thermally etched multi-faceted TiO(2) surfaces. Thermal etching of polycrystalline TiO(2) facilitates a nanoscale crystal faceting and, thus, the creation of different surface nanostructures on a single specimen surface. Atomic force microscopy shows that HPF arranges into networks and thin globular layers on flat and irregular crystal grain surfaces, respectively. On a third, faceted category we observed an alternating conformation of HPF on neighboring facets. The bulk grain orientation obtained from electron backscatter diffraction and thermodynamic mechanisms of surface reconstruction during thermal etching suggest that the grain and facet surface-specific arrangement and relative amount of adsorbed proteins depend on the associated free crystal surface energy. The implications for potentially favorable TiO(2) crystal facets regarding the inflammatory response and hemostasis are discussed with a view to the advanced surface design of future implants.

Nanopatterning effects on astrocyte reactivity

An array of design strategies have been targeted toward minimizing failure of implanted microelectrodes by minimizing the chronic glial scar around the microelectrode under chronic conditions. Current approaches toward inhibiting the initiation of glial scarring range from altering the geometry, roughness, size, shape, and materials of the device. Studies have shown materials which mimic the nanotopography of the natural environment in vivo will consequently result in an improved biocompatible response. Nanofabrication of electrode arrays is being pursued in the field of neuronal electrophysiology to increase sampling capabilities. Literature shows a gap in research of nanotopography influence in the reduction of astrogliosis. The aim of this study was to determine optimal feature sizes for neural electrode fabrication, which was defined as eliciting a nonreactive astrocytic response. Nanopatterned surfaces were fabricated with nanoimprint lithography on poly(methyl methacrylate) surfaces. The rate of protein adsorption, quantity of protein adsorption, cell alignment, morphology, adhesion, proliferation, viability, and gene expression was compared between nanopatterned surfaces of different dimensions and non-nanopatterned control surfaces. Results of this study revealed that 3600 nanopatterned surfaces elicited less of a response when compared with the other patterned and non-nanopatterned surfaces. The surface instigated cell alignment along the nanopattern, less protein adsorption, less cell adhesion, proliferation and viability, inhibition of glial fibrillary acidic protein, and mitogen-activated protein kinase kinase 1 compared with all other substrates tested.

Protein adsorption on nano-scaled, rippled TiO2 and Si surfaces

We synthesized nano-scaled periodic ripple patterns on silicon and titanium dioxide (TiO(2)) surfaces by xenon ion irradiation, and performed adsorption experiments with human plasma fibrinogen (HPF) on such surfaces as a function of the ripple wavelength. Atomic force microscopy showed the adsorption of HPF in mostly globular conformation on crystalline and amorphous flat Si surfaces as well as on nano-structured Si with long ripple wavelengths. For short ripple wavelengths the proteins seem to adsorb in a stretched formation and align across or along the ripples. In contrast to that, the proteins adsorb in a globular assembly on flat and long-wavelength rippled TiO(2), but no adsorbed proteins could be observed on TiO(2) with short ripple wavelengths due to a decrease of the adsorption energy caused by surface curvature. Consequently, the adsorption behavior of HPF can be tuned on biomedically interesting materials by introducing a nano-sized morphology while not modifying the stoichiometry/chemistry.

Identifying mechanisms of interfacial dynamics using single-molecule tracking

The "soft" (i.e., noncovalent) interactions between molecules and surfaces are complex and highly varied (e.g., hydrophobic, hydrogen bonding, and ionic), often leading to heterogeneous interfacial behavior. Heterogeneity can arise either from the spatial variation of the surface/interface itself or from molecular configurations (i.e., conformation, orientation, aggregation state, etc.). By observing the adsorption, diffusion, and desorption of individual fluorescent molecules, single-molecule tracking can characterize these types of heterogeneous interfacial behavior in ways that are inaccessible to traditional ensemble-averaged methods. Moreover, the fluorescence intensity or emission wavelength (in resonance energy transfer experiments) can be used to track the molecular configuration and simultaneously directly relate this to the resulting interfacial mobility or affinity. In this feature article, we review recent advances involving the use of single-molecule tracking to characterize heterogeneous molecule-surface interactions including multiple modes of diffusion and desorption associated with both internal and external molecular configuration, Arrhenius-activated interfacial transport, spatially dependent interactions, and many more.