Controlled release of nanoparticles and macromolecules from responsive microgel capsules

Controlled release of therapeutic antibody using hydrolytically degradable microgels

Monoclonal antibodies have gained significant interest as potential therapeutics for treating various diseases. However, these therapies are not always effective due to poor treatment compliance associated with multiple administrations and drug resistance. Thus, there is a growing interest in developing advanced monoclonal antibody delivery systems that can customize pharmacokinetics to enhance therapeutic outcomes. This work aimed to engineer hydrolytic 4-arm PEG maleimide (PEG-4MAL) microgels for the controlled delivery of therapeutic antibodies, specifically anti-angiogenic bevacizumab, to overcome the limitations of current monoclonal antibody therapies. Through a PEGylation reaction with a thiol-terminated PEG linker, the antibody was covalently conjugated to the macromer backbone before microgel synthesis. The PEGylation reaction was simple, effective, and did not affect antibody bioactivity. Antibody release kinetics was tuned by changing the concentration of the hydrolytic linker (0-2 mM) and/or PEG-4MAL:protein molar ratio (1000:1, 2000:1, and 5000:1) in the macromer precursor solution during microgel fabrication. The bioactivity of the released antibody was assessed on human umbilical endothelial vascular cells (HUVEC), demonstrating that extracts from hydrolytic microgels reduced cell proliferation over time. Collectively, this study demonstrates the development of highly tunable delivery platform based on degradable PEG-4MAL microgels that can be adapted for therapeutic antibody-controlled release.

An injectable adhesive hydrogel for photothermal ablation and antitumor immune activation against bacteria-associated oral squamous cell carcinoma

Pathogenic bacteria are closely associated with the occurrence, development and metastasis of oral squamous cell carcinoma (OSCC). Antibacterial therapy has been considered an enhancement strategy to suppress bacteria-associated tumors and promote anti-tumor immune responses. Herein, we developed an injectable adhesive hydrogel, PNIPAM/DL@TIR, for the in situ photothermal ablation and robust stimulation of antitumor immunity against OSCC colonized by Porphyromonas gingivalis (Pg), one of the major oral pathogenic bacteria. PNIPAM/DL@TIR, composed of poly(N-isopropylacrylamide), demethylated lignin, and TAT peptide-conjugated IR820, was prepared using a simple dissolve-dry-swell solvent exchange method. Upon 808 nm laser irradiation, PNIPAM/DL@TIR exerted photothermal effects to ablate Pg-colonized OSCC and generate dual tumor and bacterial antigens. Owing to its large number of catechol groups, PNIPAM/DL@TIR efficiently captured these antigens to form an in situ antigen repository, thereby eliciting robust and durable antitumor immune responses. Proteomic analysis revealed that the captured antigens comprised both tumor neoantigens and bacterial antigens. The catechol groups endowed PNIPAM/DL@TIR with antioxidant activity, which was also conducive to stimulating antitumor immunity. Altogether, this study develops an injectable adhesive hydrogel and provides a combination strategy for treating bacteria-associated OSCC. STATEMENT OF SIGNIFICANCE: In this study, we developed an injectable adhesive hydrogel, PNIPAM/DL@TIR, for in situ photothermal ablation and robust stimulation of antitumor immunity against OSCC colonized by Porphyromonas gingivalis, one of the major oral pathogenic bacteria. PNIPAM/DL@TIR, which consists of poly(N-isopropylacrylamide), demethylated lignin, and TAT peptide-conjugated IR820 exhibited outstanding photothermal performance. Owing to the presence of catechol groups, PNIPAM/DL@TIR has good bioadhesive properties and can capture protein antigens to form in situ antigen repository, thus initiating robust and long-term antitumor immune responses. In addition, PNIPAM/DL@TIR exhibited strong antioxidant activity that is favorable for promoting antitumor immunity. In the mouse model of OSCC with bacterial infection, PNIPAM/DL@TIR not only ablated the primary tumors upon NIR laser irradiation, but also induced tumor and bacterial vaccination in situ to suppress distant tumors and lung metastasis.

Charged hollow microgel capsules

Responsive hollow microgels are a fascinating class of soft model systems at the crossover between polymer capsules and microgels. The presence of the cavity makes them promising materials for encapsulation and controlled release applications but also confers them an additional softness that is reflected by their peculiar behaviour in bulk and at interfaces. Their responsivity to external stimuli, such as temperature, pH, and ionic strength, can be designed from their synthesis conditions and the choice of functional moieties. So far most studies have focused on "small" hollow microgels that were mostly studied with scattering or atomic force microscopy techniques. In our previous study, we have shown that large fluorescent hollow poly(N-isopropylacrylamide) (PNIPAM) microgels could be synthesized using micrometer-sized silica particles as sacrificial templates allowing their investigation in situ via confocal microscopy. In this work, we extend this approach to charged large hollow microgels based on poly(N-isopropylacrylamide-co-itaconic acid) (P(NIPAM-co-IA)). Hereby, we compare the structure and responsivity of "neutral" (PNIPAM) and "charged" (P(NIPAM-co-IA)) hollow microgel systems synthesized under similar conditions with the same sacrificial template using confocal and atomic force microscopy and light scattering techniques. In particular, we could demonstrate the extremely soft character of the swollen charged hollow microgels and their responsivity to pH, ionic strength, and temperature. To conclude this study, the buckling behavior of the different capsules was investigated illustrating the potential of such systems to change its conformation by varying the osmotic pressure and pH conditions.

One-step electrodeposited hybrid nanofilms in amperometric biosensor development

This review summarizes recent developments in amperometric biosensors, based on one-step electrodeposited organic-inorganic hybrid layers, used for analysis of low molecular weight compounds. The factors affecting self-assembly of one-step electrodeposited films, methods for verifying their composition, advantages, limitations and approaches affecting the electroanalytical performance of amperometric biosensors based on organic-inorganic hybrid layers were systemized. Moreover, issues related to the formation of one-step organic-inorganic hybrid functional layers with different structures in biosensors produced under the same electrodeposition parameters are discussed. The systemized dependencies can support the preliminary choice of functional sensing layers with architectures tuned for specific biotechnology and life science applications. Finally, the capabilities of one-step electrodeposition of organic-inorganic hybrid functional films beyond amperometric biosensors were highlighted.

Nonionic Microgels Adapt to Ionic Guest Molecules: Superchaotropic Nanoions

Microgels are commonly applied as solute carriers, where the size, density, and functionality of the microgels depend on solute binding. As representatives for ionic solutes with high affinity for the microgel, we study here the effect of superchaotropic Keggin polyoxometalates (POMs) PW12O403- (PW) and SiW12O404- (SiW) on the aqueous swelling and internal structure of nonionic poly(N-isopropylacrylamide) (pNiPAM) microgels by light scattering techniques and small-angle X-ray scattering. Due to their weak hydration, these POMs bind spontaneously to the microgels at millimolar concentrations. The microgels thus become charged and swell at low POM concentration, surprisingly without strongly increasing the volume phase transition temperature, and deswell at higher POM concentration. The swelling arises because of the osmotic pressure of dissociated counterions of the POMs, while the deswelling is due to POMs acting as physical cross-links in the microgels under screened electrostatics in NaCl or excess POM solution. This swelling/deswelling transition is sharper for PW than for SiW related to the lower charge density, weaker hydration, and stronger binding of PW. The POMs elicit qualitatively and quantitatively different swelling effects from ionic surfactants and classical salts. Moreover, the network softness and topology govern the swelling response upon POM binding. The softer the microgel, the stronger is the swelling response, while, inside the microgel, regions of high polymer density swell/contract more upon electric charging/cross-linking than regions with low polymer density. POM binding thus enables fine-tuning of microgel properties and highlights the role of network topology in microgel swelling. Because POMs decompose at an alkaline pH, these POM/microgel systems also exhibit pH-responsive swelling in addition to the typical temperature responsiveness of pNiPAM microgels.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Buckling and Interfacial Deformation of Fluorescent Poly(N-isopropylacrylamide) Microgel Capsules

Hollow microgels are fascinating model systems at the crossover between polymer vesicles, emulsions, and colloids as they deform, interpenetrate, and eventually shrink at higher volume fraction or when subjected to an external stress. Here, we introduce a system consisting of microgels with a micrometer-sized cavity enabling a straightforward characterization in situ using fluorescence microscopy techniques. Similarly to elastic capsules, these systems are found to reversibly buckle above a critical osmotic pressure, conversely to smaller hollow microgels, which were previously reported to deswell at high volume fraction. Simulations performed on monomer-resolved in silico hollow microgels confirm the buckling transition and show that the presented microgels can be described with a thin shell model theory. When brought to an interface, these microgels, that we define as microgel capsules, strongly deform and we thus propose to utilize them to locally probe interfacial properties within a theoretical framework adapted from the Johnson-Kendall-Roberts (JKR) theory. Besides their capability to sense their environment and to address fundamental questions on the elasticity and permeability of microgel systems, microgel capsules can be further envisioned as model systems mimicking anisotropic responsive biological systems such as red blood and epithelial cells thanks to the possibility offered by microgels to be synthesized with custom-designed properties.

Osmotic release of drugs via deswelling dynamics of microgels: modeling of collaborative flow and diffusions

Hydrogel colloids, i.e., micro- or nano-gels, are increasingly engineered as promising vehicles for polymer-based drug delivery systems. We report a continuum theory of deswelling dynamics of nanocomposite microgels driven by external osmotic shocks and further develop a universal framework, by introducing a buffer release domain, to quantitatively characterize a continuous drug release from deswollen microgels towards surroundings. The drug release is shown to proceed accompanied by an active outward solvent flow created by the elastically shrunken gel network. We further find that a declining trend in the cumulative release plateau with the drug size is followed by an apparent increase again as the drug size increases above a threshold. These findings highlight a nontrivial behavior that the resulting hydrodynamic interactions coexist collaboratively with the passive diffusions to facilitate a desired drug release. We show that deswelling of a stiffer microgel (the mesh size reduces slowly) or loading the larger drugs could bring a control-like release type, otherwise a burst-like release type emerges. Compared with a uniform microgel, the fuzzy-corona-like microgel enables a more productive drug release before reaching deswelling equilibrium. Our model not only predicts well the existing experiments, but also serves as a versatile paradigm to help understand the reciprocal roles of the solvent flow, the gel dynamics, and the diffusions in the polymer-based drug delivery systems.

Experimental determination of the bulk moduli of hollow nanogels

The softness of an object can be quantified by one of the fundamental elastic moduli. The bulk modulus of the particle is most appropriate in the presence of isotropic compressions. Here, we use small-angle neutron scattering with contrast variation to directly access the bulk modulus of polymeric nanocapsules - pNIPAM-based hollow nanogels. We show that the size of the cavity is the most important quantity that determines the softness of hollow nanogels. During initial compression, the polymer collapses into the cavity and leads to a large change in the particle volume, resulting in a very small initial bulk modulus. Once the cavity is partially occupied by the polymer, the hollow nanogels become significantly stiffer since now the highly crosslinked network has to be compressed. Furthermore, we show that the larger the cavity, the softer the nanogel.

Multi-Mode Reconfigurable DNA-Based Chemical Reaction Circuits for Soft Matter Computing and Control

Developing smart material systems for performing different tasks in diverse environments remains challenging. Here, we show that by integrating stimuli-responsive soft materials with multi-mode reconfigurable DNA-based chemical reaction circuits (D-CRCs), it can control size change of microgels with multiple reaction pathways and adapt expansion behaviors to meet diverse environments. We first use pH-responsive intramolecular conformational switches for regulating DNA strand displacement reactions (SDRs). The ability to regulate SDRs with tunable pH-dependence allows to build dynamic chemical reaction networks with diverse reaction pathways. We confirm that the designed DNA switching circuits are reconfigurable at different pH and perform different logic operations, and the swelling of DNA switching circuit-integrated microgel systems can be programmably directed by D-CRCs. Our approach provides insight into building smart responsive materials and fabricating autonomous soft robots.

Magnetic microgels and nanogels: Physical mechanisms and biomedical applications

Soft micro- and nanostructures have been extensively developed for biomedical applications. The main focus has been on multifunctional composite materials that combine the advantages of hydrogels and colloidal particles. Magnetic microgels and nanogels can be realized by hybridizing stimuli-sensitive gels and magnetic nanoparticles. They are of particular interest since they can be controlled in a wide range of biological environments by using magnetic fields. In this review, we elucidate physical principles underlying the design of magnetic microgels and nanogels for biomedical applications. Particularly, this article provides a comprehensive and conceptual overview on the correlative structural design and physical functionality of the magnetic gel systems under the concept of colloidal biodevices. To this end, we begin with an overview of physicochemical mechanisms related to stimuli-responsive hydrogels and transport phenomena and summarize the magnetic properties of inorganic nanoparticles. On the basis of the engineering principles, we categorize and summarize recent advances in magnetic hybrid microgels and nanogels, with emphasis on the biomedical applications of these materials. Potential applications of these hybrid microgels and nanogels in anticancer treatment, protein therapeutics, gene therapy, bioseparation, biocatalysis, and regenerative medicine are highlighted. Finally, current challenges and future opportunities in the design of smart colloidal biodevices are discussed.

Scaling Laws in the Diffusive Release of Neutral Cargo from Hollow Hydrogel Nanoparticles: Paclitaxel-Loaded Poly(4-vinylpyridine)

We study the nonequilibrium diffusive release of electroneutral molecular cargo encapsulated inside hollow hydrogel nanoparticles. We propose a theoretical model that includes osmotic, steric, and short-range polymer-cargo attractions to determine the effective cargo-hydrogel interaction, u_eff*, and the effective diffusion coefficient of the cargo inside the polymer network, D_eff*. Using dynamical density functional theory (DDFT), we investigate the scaling of the characteristic release time, τ_1/2, with the key parameters involved in the process, namely, u_eff*, D_eff*, and the swelling ratio. This effort represents a full study of the problem, covering a broad range of cargo sizes and providing predictions for repulsive and attractive polymer shells. Our calculations show that the release time through repulsive polymer networks scales with q²e^βu_eff*/D_eff* for βu_eff* ≫ 1. In this case, the cargo molecules are excluded from the shell of the hydrogel. For attractive shells, the polymer retains the cargo molecules on its internal surface and its interior, and the release time grows exponentially with the attraction strength. The DDFT calculations are compared to an analytical model for the mean first passage time, which provides an excellent quantitative description of the kinetics for both repulsive and attractive shells without fitting parameters. Finally, we apply the method to reproduce experimental results on the release of paclitaxel from hollow poly(4-vinylpyridine) nanoparticles and find that the slow release of the drug can be explained in terms of the strong binding attraction between the drug and the polymer.

Behavior and mechanics of dense microgel suspensions

Suspensions of soft and highly deformable microgels can be concentrated far more than suspensions of hard colloids, leading to their unusual mechanical properties. Microgels can accommodate compression in suspensions in a variety of ways such as interpenetration, deformation, and shrinking. Previous experiments have offered insightful, but somewhat conflicting, accounts of the behavior of individual microgels in compressed suspensions. We develop a mesoscale computational model to probe the behavior of compressed suspensions consisting of microgels with different architectures at a variety of packing fractions and solvent conditions. We find that microgels predominantly change shape and mildly shrink above random close packing. Interpenetration is only appreciable above space filling, remaining small relative to the mean distance between cross-links. At even higher packing fractions, microgels solely shrink. Remarkably, irrespective of the single-microgel properties, and whether the suspension concentration is changed via changing the particle number density or the swelling state of the particles, which can even result in colloidal gelation, the mechanics of the suspension can be quantified in terms of the single-microgel bulk modulus, which thus emerges as the correct mechanical measure for these type of soft-colloidal suspensions. Our results rationalize the many and varied experimental results, providing insights into the relative importance of effects defining the mechanics of suspensions comprising soft particles.

Targeted Heating of Mitochondria Greatly Augments Nanoparticle-Mediated Cancer Chemotherapy

Cancer is the second leading cause of mortality globally. Various nanoparticles have been developed to improve the efficacy and safety of chemotherapy, photothermal therapy, and their combination for treating cancer. However, most of the existing nanoparticles are low in both subcellular precision and drug loading content (<≈5%), and the effect of targeted heating of subcellular organelles on the enhancement of chemotherapy has not been well explored. Here, a hybrid Py@Si-TH nanoparticle is reported to first target cancer cells overexpressed with the variant CD44 via its natural ligand HA on the outermost surface of the nanoparticle before cellular uptake, and then target mitochondria after they are taken up inside cells. In addition, the nanoparticle is ultraefficient for encapsulating doxorubicin hydrochloride (DOX) to form Py@Si-TH-DOX nanoparticle. The encapsulation efficiency is ≈100% at the commonly used low feeding ratio of 1:20 (DOX:empty nanoparticle), and >80% at an ultrahigh feeding ratio of 1:1. In combination with near infrared (NIR, 808 nm) laser irradiation, the tumor weight in the Py@Si-TH-DOX treatment group is 8.5 times less than that in the Py@Si-H-DOX (i.e., DOX-laden nanoparticles without mitochondrial targeting) group, suggesting targeted heating of mitochondria is a valuable strategy for enhancing chemotherapy to combat cancer.

Synthesis and structure of temperature-sensitive nanocapsules

The transport and systematic release of functional agents at specific areas are key challenges in various application fields. These make the development of micro- and nanocapsules, which allow for uptake, storage, and triggered release, of high interest. Hollow thermoresponsive microgels, cross-linked polymer networks with a solvent-filled cavity in their center, are promising candidates as triggerable nanocapsules, as they can adapt their size and shape to the environment. Their shell permeability can be controlled by temperature, while the cavity can serve as a storage place for guest species. Here, we present the synthesis and structural characterization of temperature-responsive microgels, which are deswollen at room temperature and swell upon moderate cooling, to facilitate potential encapsulation experiments. We present microgels made from poly(N-isopropylacrylamide-co-diacetone acrylamide), p(NIPAM-co-DAAM), possessing a volume phase transition temperature below room temperature. Their colloidal stability in the deswollen state can be enhanced by adding a swollen polymer shell made of poly(N-isopropylacrylamide), pNIPAM, as periphery. The synthesis of hollow double-shell microgels comprising a cavity surrounded by an inner p(NIPAM-co-DAAM) shell and an outer pNIPAM shell is established. The inner network enables the control of the shell permeability: the network is deswollen at room temperature and swells upon moderate cooling. The outer network guarantees for steric stability at room temperature. Light scattering techniques are employed for the characterization of the microgels. Form factor analysis reveals that the cavity of the nanocapsules persists at all swelling states, making it an ideal site for the storage of guest species.

Directed Self-Assembly of Patchy Microgels into Anisotropic Nanostructures

Multi-geometry nanostructures with high-order, complex, and controllable geometries have attracted extensive attention in the development of functional nanomaterials. A simple and versatile strategy is proposed to construct various anisotropic nanostructures through the directed self-assembly (DSA) of patchy microgels. A general criterion for interaction parameters is developed by the variance analysis method to achieve the formation of 1D nanorods by the single directional DSA process, and 2D or 3D polymorphs including V/T/h/cross shapes, multiple arms, multi-directional bending, single/multiple rings, nanocages, etc., by the multi-directional DSA process of binary microgel blends. At the optimum interaction parameters, the nanorods exhibit the quickest formation process and the most thermodynamically stable geometry, while the various 2D or 3D assemblies exhibit controlled jointing behaviors for versatile assembly geometries. The number of recognition sites on the patchy microgel surface guides the aggregation modes of microgels during the DSA process. These assemblies can bear large curvature variance with the increase of shear rates due to the high flexibility and the ability of adjusting orientation spontaneously. The DSA behavior of patchy microgels differs from the traditional self-assembly process of block copolymers, which may open a new route for guiding the formation of controllable nanoparticle architectures.

Reversible temperature-controlled gelation in mixtures of pNIPAM microgels and non-ionic polymer surfactant

We investigate the reversible gelation of poly(N-isopropylacrylamide) (pNIPAM) microgels in the presence of triblock-copolymer (PEO-PPO-PEO type) surfactant. We demonstrate that the association of these polymers with the microgel particles at elevated temperature is responsible for the gelation, due to the temperature responsive nature of the components. This is highlighted by an increase in the apparent hydrodynamic diameter of the particles in dynamic light scattering experiments, which only occurs above the volume phase transition temperature of pNIPAM. The gels that result shrink over a time period much larger than that of the collapse of pNIPAM microgels, and retain the shape of the container they form in. We investigate the mechanism that leads to this gelation and the structure of the gels that result. Confocal microscopy experiments show that both polymers are present in the gel network, indicating that an associative mechanism is responsible for the gelation. We vary the pNIPAM particle architecture to further investigate the gelation process, and find that the cross-link distribution plays a key role in the gelation mechanism, where for uniformly cross-linked particles the gelation is not observed. This shows that the fuzzy corona of the pNIPAM microgels is involved in the association of the polymers, allowing the triblock-copolymer to penetrate the outer corona of the microgels and bridge the particles. The phase transition observed is close to physiological conditions, so these gels have the potential for use in biomedical applications, including tissue engineering.

Interplay of Nanoparticle Rigidity and Its Translocation Ability through Cell Membrane

Understanding the endocytic process of nanoparticles (NPs) with different mechanical rigidities is critical to develop effective drug delivery vectors. Here, we perform experiments, coarse-grained molecular dynamics simulations, and theoretical analyses to investigate the role of NPs' mechanical rigidity in the cellular endocytic process. Experiments based on two types of engineered Au NPs that have similar properties but different rigidities are performed in order to investigate their cellular uptake efficiencies, and it has been found that the more rigid NPs can achieve a higher cellular uptake efficiency. Simulation results confirm that rigid NPs can achieve full internalization by forming a complete double-layer endosome coating, while relatively soft NPs can only reach 40% surface coverage by membrane lipids. Simulation results capture an intriguing translocation of multiple NPs with different rigidities in a cooperative manner where the NPs' mechanical rigidities regulate their translocation efficiencies. We find that theoretically rigid NPs require less energy to overcome the energy barrier for membrane internalization than soft NPs do, which is in good agreement with experiment and simulation results. This synergetic study offers useful insight into the design principle of a general NP-based drug delivery vector as well as the promising biomedical application of NP-based medicine.

Towards the realistic computer model of precipitation polymerization microgels

In this paper we propose a new method of coarse-grained computer simulations of the microgel formation in course of free radical precipitation polymerization. For the first time, we simulate the precipitation polymerization process from a dilute solution of initial components to a final microgel particle with coarse grained molecular dynamics, and compare it to the experimental data. We expect that our simulation studies of PNIPA-like microgels will be able to elucidate the subject of nucleation and growth kinetics and to describe in detail the network topology and structure. Performed computer simulations help to determine the characteristic phases of the growth process and show the necessity of prolongated synthesis for the formation of stable microgel particles. We demonstrate the important role of dangling ends in microgels, which occupy as much as 50% of its molecular mass and have previously unattended influence on the swelling behavior. The verification of the model is made by the comparison of collapse curves and structure factors between simulated and experimental systems, and high quality matching is achieved. This work could help to open new horizons in studies that require the knowledge of detailed and realistic structures of the microgel networks.

Membrane Wrapping Pathway of Injectable Hydrogels: From Vertical Capillary Adhesion to Lateral Compressed Wrapping

Membrane wrapping pathway of injectable hydrogels (IHs) plays a vital role in the nanocarrier effectiveness and biomedical safety. Although considerable progress in understanding this complicated process has been made, the mechanism behind this process has remained elusive. Herein, with the help of large-scale dissipative particle dynamics simulations, we explore the molecular mechanism of membrane wrapping by systematically examining the IH architectures and hydrogel-lipid binding strengths. To the best of our knowledge, this is the first report on the membrane wrapping pathway on which IHs transform from vertical capillary adhesion to lateral compressed wrapping. This transformation results from the elastocapillary deformation of networked gels and nanoscale confinement of the bilayer membrane, and it takes long time for the IHs to be fully wrapped owing to the high energy barriers and wrapping-induced shape deformation. Collapsed morphologies and small compressed angles are identified in the IH capsules with a thick shell or strong binding strength to lipids. In addition, the IHs binding intensively to the membrane exhibit special nanoscale mixing and favorable deformability during the wrapping process. Our study provides a detailed mechanistic understanding of the influence of architecture and binding strength on the IH membrane wrapping efficiency. This work may serve as rational guidance for the design and fabrication of IH-based drug carriers and tissue engineering.

From Microscale to Macroscale: Nine Orders of Magnitude for a Comprehensive Modeling of Hydrogels for Controlled Drug Delivery

Because of their inherent biocompatibility and tailorable network design, hydrogels meet an increasing interest as biomaterials for the fabrication of controlled drug delivery devices. In this regard, mathematical modeling can highlight release mechanisms and governing phenomena, thus gaining a key role as complementary tool for experimental activity. Starting from the seminal contribution given by Flory-Rehner equation back in 1943 for the determination of matrix structural properties, over more than 70 years, hydrogel modeling has not only taken advantage of new theories and the increasing computational power, but also of the methods offered by computational chemistry, which provide details at the fundamental molecular level. Simulation techniques such as molecular dynamics act as a "computational microscope" and allow for obtaining a new and deeper understanding of the specific interactions between the solute and the polymer, opening new exciting possibilities for an in silico network design at the molecular scale. Moreover, system modeling constitutes an essential step within the "safety by design" paradigm that is becoming one of the new regulatory standard requirements also in the field-controlled release devices. This review aims at providing a summary of the most frequently used modeling approaches (molecular dynamics, coarse-grained models, Brownian dynamics, dissipative particle dynamics, Monte Carlo simulations, and mass conservation equations), which are here classified according to the characteristic length scale. The outcomes and the opportunities of each approach are compared and discussed with selected examples from literature.

Nonequilibrium Uptake Kinetics of Molecular Cargo into Hollow Hydrogels Tuned by Electrosteric Interactions

Hollow hydrogels represent excellent nano- and microcarriers due to their ability to encapsulate and release large amounts of cargo molecules (cosolutes) such as reactants, drugs, and proteins. In this work, we use a combination of a phenomenological effective cosolute-hydrogel interaction potential and dynamic density functional theory to investigate the full nonequilibrium encapsulation kinetics of charged and dipolar cosolutes by an isolated charged hollow hydrogel immersed in a 1:1 electrolyte aqueous solution. Our analysis covers a broad spectrum of cosolute valences ( z_c) and electric dipole moments (μ_c), as well as hydrogel swelling states and hydrogel charge densities. Our calculations show that, close to the collapsed state, the polar cosolutes are predominantly precluded and the encapsulation process is strongly hindered by the excluded-volume interaction exerted by the polymer network. Different equilibrium and kinetic sorption regimes (interface versus interior) are found depending on the value and sign of z_c and the value of μ_c. For cosolutes of the same sign of charge as the gel, the superposition of steric and electrostatic repulsion leads to an "interaction-controlled" encapsulation process, in which the characteristic time to fill the empty core of the hydrogel grows exponentially with z_c. On the other hand, for cosolutes oppositely charged to the gel, we find a "diffusion-controlled" kinetic regime, where cosolutes tend to rapidly absorb into the hydrogel membrane and the encapsulation rate depends only on the cosolute diffusion time across the membrane. Finally, we find that increasing μ_c promotes the appearance of metastable and stable surface adsorption states. For large enough μ_c, the kinetics enters an "adsorption-hindered diffusion", where the enhanced surface adsorption imposes a barrier and slows down the uptake. Our study represents the first attempt to systematically describe how the swelling state of the hydrogel and other leading physical interaction parameters determine the encapsulation kinetics and the final equilibrium distribution of polar molecular cargo.

Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization

Controlling and understanding the electrochemical properties of electroactive polymeric colloids is a highly topical but still a rather unexplored field of research. This is especially true when considering more complex particle architectures like stimuli-responsive microgels, which would entail different kinetic constraints for charge transport within one particle. We synthesize and electrochemically address dual stimuli responsive core-shell microgels, where the temperature-responsiveness modulates not only the internal structure, but also the microgel electroactivity both on an internal and on a global scale. In detail, a facile one-step precipitation polymerization results in architecturally advanced poly(N-isopropylacrylamide-co-vinylferrocene) P(NIPAM-co-VFc) microgels with a ferrocene (Fc)-enriched (collapsed/hard) core and a NIPAM-rich shell. While the remaining Fc units in the shell are electrochemically accessible, the electrochemical activity of Fc in the core is limited due to the restricted mobility of redox active sites and therefore restricted electron transfer in the compact core domain. Still, prolonged electrochemical action and/or chemical oxidation enable a reversible adjustment of the internal microgel structure from core-shell microgels with a dense core to completely oxidized microgels with a highly swollen core and a denser corona. The combination of thermo-sensitive and redox-responsive units being part of the network allows for efficient amplification of the redox response on the overall microgel dimension, which is mainly governed by the shell. Further, it allows for an electrochemical switching of polarity (hydrophilicity/hydrophobicity) of the microgel, enabling an electrochemically triggered uptake and release of active guest molecules. Hence, bactericidal drugs can be released to effectively kill bacteria. In addition, good biocompatibility of the microgels in cell tests suggests suitability of the new microgel system for future biomedical applications.

Numerical modelling of non-ionic microgels: an overview

Microgels are complex macromolecules. These colloid-sized polymer networks possess internal degrees of freedom and, depending on the polymer(s) they are made of, can acquire a responsiveness to variations of the environment (temperature, pH, salt concentration, etc.). Besides being valuable for many practical applications, microgels are also extremely important to tackle fundamental physics problems. As a result, these last years have seen a rapid development of protocols for the synthesis of microgels, and more and more research has been devoted to the investigation of their bulk properties. However, from a numerical standpoint the picture is more fragmented, as the inherently multi-scale nature of microgels, whose bulk behaviour crucially depends on the microscopic details, cannot be handled at a single level of coarse-graining. Here we present an overview of the methods and models that have been proposed to describe non-ionic microgels at different length-scales, from the atomistic to the single-particle level. We especially focus on monomer-resolved models, as these have the right level of details to capture the most important properties of microgels, responsiveness and softness. We suggest that these microscopic descriptions, if realistic enough, can be employed as starting points to develop the more coarse-grained representations required to investigate the behaviour of bulk suspensions.

One-step encapsulation, storage and controlled release of low molecular weight organic compounds via electroplated nanoparticles

Herein, we introduce an original strategy towards one-step encapsulation, storage and controlled release of low molecular weight organic compounds via electroplated nanoparticles.

Star polymers as unit cells for coarse-graining cross-linked networks

Reducing the complexity of cross-linked polymer networks by preserving their main macroscale properties is key to understanding them, and a crucial issue is to relate individual properties of the polymer constituents to those of the reduced network. Here we study polymer networks in a good solvent, by considering star polymers as their unit elements, and first quantify the interaction between their centers of masses. We then reduce the complexity of a network by replacing sets of its bridged star polymers by equivalent effective soft particles with dense cores. Our coarse graining allows us to approximate complex polymer networks by much simpler ones, keeping their relevant mechanical properties, as illustrated in computer experiments.

Shell-corona microgels from double interpenetrating networks

Polymer microgels with a dense outer shell offer outstanding features as universal carriers for different guest molecules. In this paper, microgels formed by an interpenetrating network comprised of collapsed and swollen subnetworks are investigated using dissipative particle dynamics (DPD) computer simulations, and it is found that such systems can form classical core-corona structures, shell-corona structures, and core-shell-corona structures, depending on the subchain length and molecular mass of the system. The core-corona structures consisting of a dense core and soft corona are formed at small microgel sizes when the subnetworks are able to effectively separate in space. The most interesting shell-corona structures consist of a soft cavity in a dense shell surrounded with a loose corona, and are found at intermediate gel sizes; the area of their existence depends on the subchain length and the corresponding mesh size. At larger molecular masses the collapsing network forms additional cores inside the soft cavity, leading to the core-shell-corona structure.

Computational approaches to cell-nanomaterial interactions: keeping balance between therapeutic efficiency and cytotoxicity

Owing to their unique properties, nanomaterials have been widely used in biomedicine since they have obvious inherent advantages over traditional ones. However, nanomaterials may also cause dysfunction in proteins, genes and cells, resulting in cytotoxic and genotoxic responses. Recently, more and more attention has been paid to these potential toxicities of nanomaterials, especially to the risks of nanomaterials to human health and safety. Therefore, when using nanomaterials for biomedical applications, it is of great importance to keep the balance between therapeutic efficiency and cytotoxicity (i.e., increase the therapeutic efficiency as well as decrease the potential toxicity). This requires a deeper understanding of the interactions between various types of nanomaterials and biological systems at the nano/bio interface. In this review, from the point of view of theoretical researchers, we will present the current status regarding the physical mechanism of cytotoxicity caused by nanomaterials, mainly based on recent simulation results. In addition, the strategies for minimizing the nanotoxicity naturally and artificially will also be discussed in detail. Furthermore, we should notice that toxicity is not always bad for clinical use since causing the death of specific cells is the main way of treating disease. Enhancing the targeting ability of nanomaterials to diseased cells and minimizing their side effects on normal cells will always be hugely challenging issues in nanomedicine. By combining the latest computational studies with some experimental verifications, we will provide special insights into recent advances regarding these problems, especially for the design of novel environment-responsive nanomaterials.

Mechanistic modelling of drug release from multi-layer capsules

We propose a novel in silico model for computing drug release from multi-layer capsules. The diffusion problem in such heterogeneous layer-by-layer composite medium is described by a system of coupled partial differential equations, which we solve analytically using separation of variables. In addition to the conventional partitioning and mass transfer interlayer conditions, we consider a surface finite mass transfer resistance, which corresponds to the case of a coated capsule. The drug concentration in the core and through all the layers, as well as in the external release medium, is given in terms of a Fourier series that we compute numerically to describe and characterize the drug release mechanism.

Hybrid mesoporous silica nanocarriers with thermovalve-regulated controlled release

Mesoporous silica nanoparticles (MSNs) are excellent nanocarriers, featuring very high cargo capacity due to their large surface area and pore volume. The particle and pore dimensions can be accurately tuned, and both the internal and external surfaces allow versatile functionalization. We developed hybrid MSNs with diameters around 140 nm, with the external surface selectively modified with a temperature-responsive biocompatible copolymer to control cargo release. The nanoparticles feature either a polymer brush or a gel-like responsive shell, produced by grafting from RAFT polymerization of PEG-acrylate macromonomers. The hybrid nanoparticles have fluorescent molecules incorporated into the inorganic network providing excellent optical properties for traceability and imaging. The cargo release profiles are explained by a temperature-controlled "pumping" mechanism: at low temperature (ca. 20 °C) the polymer shell is hydrophilic and expanded, opposing cargo diffusion out of the shell and retaining the molecules released from the mesopores; above room temperature (ca. 40-50 °C) the polymer network becomes more hydrophobic and collapses onto the silica surface, releasing the cargo by a sponge-like squeezing effect. The release kinetics depends on the polymer shell type, with better results obtained for the gel-coated nanoparticles. Our proof-of-concept system shows that by modulating the temperature, it is possible to achieve a pumping regime that increases the release rate in a controlled way.

Tunable Permeability of Cross-Linked Microcapsules from pH-Responsive Amphiphilic Diblock Copolymers: A Dissipative Particle Dynamics Study

Using dissipative particle dynamics simulation, we probe the tunable permeability of cross-linked microcapsules made from pH-sensitive diblock copolymers poly(ethylene oxide)-b-poly(N,N-diethylamino-2-ethyl methacrylate) (PEO-b-PDEAEMA). We first examine the self-assembly of non-cross-linked microcapsules and their pH-responsive collapse and then explore the effects of cross-linking and block interaction on the swelling or deswelling of cross-linked microcapsules. Our results reveal a preferential loading of hydrophobic dicyclopentadiene (DCPD) molecules in PEO-b-PDEAEMA copolymers. Upon reduction of pH, non-cross-linked microcapsules fully decompose into small wormlike clusters as a result of large self-repulsions of protonated copolymers. With increasing degree of cross-linking, the morphology of the microcapsule becomes more stable to pH change. The highly cross-linked microcapsule shell undergoes significant local polymer rearrangement in acidic solution, which eliminates the amphiphilicility and therefore enlarges the permeability of the shell. The responsive cross-linked shell experiences a disperse-to-buckle configurational transition upon reduction of pH, which is effective for the steady or pulsatile regulation of shell permeability. The swelling rate of the cross-linked shell is dependent on both electrostatic and nonelectrostatic interactions between the pH-sensitive groups as well as the other groups. Our study highlights the combination of cross-linking structure and block interactions in stabilizing microcapsules and tuning their selective permeability.

Facilitating the Clinical Integration of Nanomedicines: The Roles of Theoretical and Computational Scientists

Since the launch of multiple research initiatives on nanotechnology applied to medicine in the early 2000s, a plethora of nanomedicines have been developed that exhibit great therapeutic efficacy in preclinical models but yet minimal impact in daily clinical practice. The successful and complete clinical fruition of nanomedicines requires addressing three major technical challenges: improving loading efficacy and on-command release, modulating recognition and sequestration by immune cells, and maximizing accumulation at biological targets. In this Perspective, I describe how theoretical and computational models can help address each of these challenges. This armamentarium represents an ideal tool for maximizing the therapeutic efficacy of nanomedicines, thus facilitating their integration into daily clinical operations.

Core-Shell Chitosan Microcapsules for Programmed Sequential Drug Release

A novel type of core-shell chitosan microcapsule with programmed sequential drug release is developed by the microfluidic technique for acute gastrosis therapy. The microcapsule is composed of a cross-linked chitosan hydrogel shell and an oily core containing both free drug molecules and drug-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles. Before exposure to acid stimulus, the resultant microcapsules can keep their structural integrity without leakage of the encapsulated substances. Upon acid-triggering, the microcapsules first achieve burst release due to the acid-induced decomposition of the chitosan shell. The encapsulated free drug molecules and drug-loaded PLGA nanoparticles are rapidly released within 60 s. Next, the drugs loaded in the PLGA nanoparticles are slowly released for several days to achieve sustained release based on the synergistic effect of drug diffusion and PLGA degradation. Such core-shell chitosan microcapsules with programmed sequential drug release are promising for rational drug delivery and controlled-release for the treatment of acute gastritis. In addition, the microcapsule systems with programmed sequential release provide more versatility for controlled release in biomedical applications.

Multi-Shell Hollow Nanogels with Responsive Shell Permeability

We report on hollow shell-shell nanogels with two polymer shells that have different volume phase transition temperatures. By means of small angle neutron scattering (SANS) employing contrast variation and molecular dynamics (MD) simulations we show that hollow shell-shell nanocontainers are ideal systems for controlled drug delivery: The temperature responsive swelling of the inner shell controls the uptake and release, while the thermoresponsive swelling of the outer shell controls the size of the void and the colloidal stability. At temperatures between 32 °C < T < 42 °C, the hollow nanocontainers provide a significant void, which is even larger than the initial core size of the template, and they possess a high colloidal stability due to the steric stabilization of the swollen outer shell. Computer simulations showed, that temperature induced switching of the permeability of the inner shell allows for the encapsulation in and release of molecules from the cavity.

Designing Composite Coatings That Provide a Dual Defense against Fouling

Inspired by marine organisms that utilize spines and shape changes to prevent the biofouling of their surfaces, we use computational modeling to design a gel-based composite coating that provides a two-pronged defense mechanism against the fouling of the underlying substrate. Using dissipative particle dynamics (DPD) simulations, we construct a coating that encompasses rigid posts embedded in a thermoresponsive gel, which exhibits a lower critical solution temperature (LCST). When the gel is heated above its LCST, it collapses to expose the buried posts, which act as spines or spikes that prevent a solid particle from penetrating the layer. Moreover, we show that an imposed shear flow readily dislodges these particles and washes them away from the coated substrate. As the system dissipates heat and cools, the LCST gel expands, and this dynamic morphological change can also be harnessed to dislodge the adsorbed particles. Thus, both the exposed posts and the swelling gels can provide barriers to the penetration of particulates through the coating. In this manner, the coating provides a dual mechanism against the fouling of the substrate. This physical approach can be particularly beneficial because it does not require the release of any chemical substances that could have detrimental consequences to the environment.

Temperature-Tunable Nanoparticles for Selective Biointerface

Drugs can be delivered by a temperature change-driven shrinking of the nanocarrier followed by the cargo release. This paper describes a different structural response to temperature, performed by nanoparticles of poly(N-isopropylacrylamide) and hyaluronic acid. Around 35 °C, the hydrophobicity of the vinyl polymer drives a core-shell rearrangement with the acrylamide chains confined in the core and the polysaccharide moiety forming the shell. In this arrangement, the nanoparticles enable the active targeting of tumor cells, due to the specific interaction of hyaluronic acid with the CD44 receptors. When doxorubicin-loaded nanoparticles are up-taken, the polysaccharide part degrades in the cytoplasm and the cytotoxic effect of the anticancer drug in colon adenocarcinoma cells has a 2-fold increase with respect to healthy fibroblasts. These core-shell particles have hyaluronic acid as the key factor for the specific targeting of tumor cells and drug release with poly(N-isopropylacrylamide) driving the transition.