Sustainable design of high-performance microsized microbial fuel cell with carbon nanotube anode and air cathode

Model Study of CNT-Based PEMFCs’ Electrocatalytic Layers

One of the most important problems in the development of proton-exchange membrane fuel cells (PEMFCs) is the selection of an efficient support material to serve as the electrocatalyst, which can ensure PEMFCs’ durability at low active metal loading, with minimal changes in the electrochemical surface and conductivity during long-term operations. Carbon nanostructures are now widely used in PEMFCs as such support materials, including carbon nanotubes (CNTs). In order to estimate the effect of the geometric parameters of a CNT-based support on the resulting size distribution of platinum nanoparticles for given synthesis conditions, in this work, we propose a semi-empirical model that assumes a random uniform distribution of platinum particles over the CNT surface. Based on the obtained distribution, the electrochemically active surface area (EASA) of the electrocatalyst is calculated and further used to evaluate the performance of the catalytic layer (CL) in the PEMFC. The applicability of the proposed model for calculating the parameters of CNT-based CLs and the output electrochemical characteristics of PEMFCs is shown.

Three-dimensional carbon nanofiber-based anode for high generated current and power from air-cathode micro-sized MFC

It is agreed that low mass transfer and poor reaction kinetics are the main reasons behind the low power density of microbial fuel cells (MFCs). Microscale MFCs can introduce a marvelous solution for the mass transfer dilemma. However, the volumetric power density and coulombic efficiency of present microscale MFCs are still limited due to the poor reaction kinetics. The size, shape, chemical properties and material of the electrodes are essential parameters controlling the reaction kinetics. In this study, a 3D carbon nanofiber disk is introduced as an effective anode for a single-chamber air-cathode micro-sized MFC as it improved the reaction kinetics. The proposed electrode was fabricated by a judicious combination of the electrospinning technique and thermal treatment. Owing to the intercalation of the microorganisms in the carbon nanofiber skeleton, compared to many previous reports, high power and current densities of 8.1 Wm^-2 and 44.9 Am^-2, respectively, were obtained from the 19.6 μL single-chamber air-cathode MFC. However, the thickness of the carbon nanofiber layer has to be optimized by adjusting the electrospinning time. The power density observed from a 10 min electrospinning time-based anode outperformed the 5- and 20 min ones by 1.5 and 2 times, respectively.

A comprehensive review on the use of conductive materials to improve anaerobic digestion: Focusing on landfill leachate treatment

Globally, around 70% of waste is disposed of in open dumps or landfill sites, with the leachate generated from these sites containing high concentrations of organic and inorganic compounds, which will adversely affect aquatic environments if discharged without proper treatment. Anaerobic digestion of landfill leachate is an environmentally-friendly method that efficiently converts organic compounds into methane-rich biogas. However, the widespread application of anaerobic digestion has been hindered by poor system stability, low methanogenic activity and a high level of volatile fatty acids (VFAs) accumulation, increasing the operational costs of treatment. Conductive materials can be added to the digester to improve the performance of anaerobic digestion in landfill leachate treatment systems and studies reporting the use of conductive materials for this purpose are hereby thoroughly reviewed. The mechanism of microbial growth and enrichment by conductive materials is discussed, as well as the subsequent effect on waste metabolism, methane production, syntrophic relationships and interspecies electron transfer. The porous structure, specific surface area and conductivity of conductive materials play vital roles in the facilitation of syntrophic relationships between fermentative bacteria and methanogenic archaea. In addition, the mediation of direct interspecies electron transfer (DIET) by conductive materials increases the methane content of biogas from 16% to 60% as compared to indirect interspecies electron transfer (IIET) in conventional anaerobic digestion systems. This review identifies research gaps in the field of material-amended anaerobic systems, suggesting future research directions including investigations into combined chemical-biological treatments for landfill leachate, microbial management using conductive materials for efficient pollutant removal and the capacity for material reuse. Moreover, findings of this review provide a reference for the efficient and large-scale treatment of landfill leachate by anaerobic digestion with conductive materials.

Novel study on microbial fuel cells via a comprehensive bibliometric and dynamic approach

Microbial fuel cells (MFCs) are eco-friendly and useful bioelectrical devices that harness the natural metabolisms of microbes to produce electrical power directly from organic materials. In this study, a bibliometric analysis is conducted to evaluate MFC research from 2001 to 2018 on the basis of the Science Citation Index Expanded database. Overall, MFC research has experienced a dramatic increase over last 18 years, with an exponential growth in the accumulated number of publications. Most publications are closely related to the industrialization and commoditization of MFCs, along with environmental issues, which are currently the biggest global challenges in MFC studies. A small proportion (4.34%) of the scientific journals published more than half (54.34%) of the total articles in the MFC field. Articles from the top 10 countries/regions accounted for the majority (83.16%) of the total articles, clearly indicating that advanced MFC technologies are currently dominated by these countries/regions. Moreover, an increasing number of MFC researchers are considering two-chamber and three-chamber MFC reactions. In particular, they are focusing on environmental technology instead of merely improving the efficiency of electricity generation. Materials research in the MFC field is still a popular area worldwide, and many researchers have focused on novel and eco-friendly cathode and anode developments. Meanwhile, only a few MFC studies are concerned with biological research.

A review on bio-electro-Fenton systems as environmentally friendly methods for degradation of environmental organic pollutants in wastewater

Bio-electro-Fenton (BEF) systems have been potentially studied as a promising technology to achieve environmental organic pollutants degradation and bioelectricity generation. The BEF systems are interesting and constantly expanding fields of science and technology. These emerging technologies, coupled with anodic microbial metabolisms and electrochemical Fenton's reactions, are considered suitable alternatives. Recently, great attention has been paid to BEFs due to special features such as hydrogen peroxide generation, energy saving, high efficiency and energy production, that these features make BEFs outstanding compared with the existing technologies. Despite the advantages of this technology, there are still problems to consider including low production of current density, chemical requirement for pH adjustment, iron sludge formation due to the addition of iron catalysts and costly materials used. This review has described the general features of BEF system, and introduced some operational parameters affecting the performance of BEF system. In addition, the results of published researches about the degradation of persistent organic pollutants and real wastewaters treatment in BEF system are presented. Some challenges and possible future prospects such as suitable methods for improving current generation, selection of electrode materials, and methods for reducing iron residues and application over a wide pH range are also given. Thus, the present review mainly revealed that BEF system is an environmental friendly technology for integrated wastewater treatment and clean energy production.

Recent Developments in Carbon-Based Nanocomposites for Fuel Cell Applications: A Review

Carbon-based nanocomposites have developed as the most promising and emerging materials in nanoscience and technology during the last several years. They are microscopic materials that range in size from 1 to 100 nanometers. They may be distinguished from bulk materials by their size, shape, increased surface-to-volume ratio, and unique physical and chemical characteristics. Carbon nanocomposite matrixes are often created by combining more than two distinct solid phase types. The nanocomposites that were constructed exhibit unique properties, such as significantly enhanced toughness, mechanical strength, and thermal/electrochemical conductivity. As a result of these advantages, nanocomposites have been used in a variety of applications, including catalysts, electrochemical sensors, biosensors, and energy storage devices, among others. This study focuses on the usage of several forms of carbon nanomaterials, such as carbon aerogels, carbon nanofibers, graphene, carbon nanotubes, and fullerenes, in the development of hydrogen fuel cells. These fuel cells have been successfully employed in numerous commercial sectors in recent years, notably in the car industry, due to their cost-effectiveness, eco-friendliness, and long-cyclic durability. Further; we discuss the principles, reaction mechanisms, and cyclic stability of the fuel cells and also new strategies and future challenges related to the development of viable fuel cells.

Leaf metabolic influence of glyphosate and nanotubes on the Arabidopsis thaliana phyllosphere

Chemical exposure can indirectly affect leaf microbiota communities, but the mechanism driving this phenomenon remains largely unknown. Results revealed that the co-exposure of glyphosate and multi-carbon nanotubes (CNTs) caused a synergistic inhibitory effect on the growth and metabolism of Arabidopsis thaliana shoots. However, only a slight inhibitory effect was induced by nanotubes or glyphosate alone at the tested concentrations. Several intermediate metabolites of nitrogen metabolism and fatty acid synthesis pathways were upregulated under the combined treatment, which increased the amount of energy required to alleviate the disruption caused by the combined treatment. Additionally, compared with the two individual treatments, the glyphosate/nanotube combination treatment induced greater fluctuations in the phyllosphere bacterial community members with low abundance (relative abundance (RA) <1%) at both the family and genus levels, and among these bacteria some plant growth promotion and nutrient supplement related bacteria were markable increased. Strikingly, strong correlations between phyllosphere bacterial diversity and metabolites suggested a potential role of leaf metabolism, particularly nitrogen and carbohydrate metabolism, in restricting the range of leaf microbial taxa. These correlations between phyllosphere bacterial diversity and leaf metabolism will improve our understanding of plant-microbe interactions and the extent of their drivers of variation and the underlying causes of variability in bacterial community composition.

Bacteria-affinity aminated carbon nanotubes bridging reduced graphene oxide for highly efficient microbial electrocatalysis

Bioelectrochemical systems (BESs) exhibit great potential for simultaneous wastewater treatment and energy recovery. However, the efficiency of microbial electrocatalysis is fundamentally limited by the high resistance and poor biocompatibility of electrode materials. Herein, we construct a novel "binder-free" 3D biocompatible bioelectrode consists of 1D aminated carbon nanotubes (CNTs-NH₂) and 2D conductive reduced graphene oxide (rGO) nanosheets through one-step electrodeposition. As expected, the maximum current density reached to 3.25 ± 0.03 mA cm^-2 with the rGO@CNTs-NH₂ electrode, which is 4.33-fold higher than that of a bare rGO (0.75 ± 0.01 mA cm^-2), and is among the best performance reported for three-dimensional electrodes. The high microbial electrocatalytic activity is mainly attributed to the excellent performance of electron transfer and bacterial colonization, which originates from the 3D interconnecting scaffold, fast 1D CNTs "e-bridge" and positively charged surface.

Multiwall carbon nanotubes modulate paraquat toxicity in Arabidopsis thaliana

Carbon nanotubes can be either toxic or beneficial to plant growth and can also modulate toxicity of organic contaminants through surface sorption. The complex interacting toxic effects of carbon nanotubes and organic contaminants in plants have received little attention in the literature to date. In this study, the toxicity of multiwall carbon nanotubes (MWCNT, 50 mg/L) and paraquat (MV, 0.82 mg/L), separately or in combination, were evaluated at the physiological and the proteomic level in Arabidopsis thaliana for 7-14 days. The results revealed that the exposure to MWCNT had no inhibitory effect on the growth of shoots and leaves. Rather, MWCNT stimulated the relative electron transport rate and the effective photochemical quantum yield of PSII value as compared to the control by around 12% and lateral root production up to nearly 4-fold as compared to the control. The protective effect of MWCNT on MV toxicity on the root surface area could be quantitatively explained by the extent of MV adsorption on MWCNT and was related to stimulation of photosynthesis, antioxidant protection and number and area of lateral roots which in turn helped nutrient assimilation. The influence of MWCNT and MV on photosynthesis and oxidative stress at the physiological level was consistent with the proteomics analysis, with various over-expressed photosynthesis-related proteins (by more than 2 folds) and various under-expressed oxidative stress related proteins (by about 2-3 folds). This study brings new insights into the interactive effects of two xenobiotics (MWCNT and MV) on the physiology of a model plant.

Advances towards understanding and engineering direct interspecies electron transfer in anaerobic digestion

Direct interspecies electron transfer (DIET) is a recently discovered microbial syntrophy where cell-to-cell electron transfer occurs between syntrophic microbial species. DIET between bacteria and methanogenic archaea in anaerobic digestion can accelerate the syntrophic conversion of various reduced organic compounds to methane. DIET-based syntrophy can naturally occur in some anaerobic digester via conductive pili, however, can be engineered via the addition of various non-biological conductive materials. In recent years, research into understanding and engineering DIET-based syntrophy has emerged with the aim of improving methanogenesis kinetics in anaerobic digestion. This article presents a state-of-art review focusing on the fundamental mechanisms, key microbial players, the role of electrical conductivity, the effectiveness of various conductive additives, the significance of substrate characteristics and organic loading rates in promoting DIET in anaerobic digestion.

Carbon-Based Microbial-Fuel-Cell Electrodes: From Conductive Supports to Active Catalysts

Microbial fuel cells (MFCs) have attracted considerable interest due to their potential in renewable electrical power generation using the broad diversity of biomass and organic substrates. However, the difficulties in achieving high power densities and commercially affordable electrode materials have limited their industrial applications to date. Carbon materials, which can exhibit a wide range of different morphologies and structures, usually possess physiological activity to interact with microorganisms and are therefore fast-emerging electrode materials. As the anode, carbon materials can significantly promote interfacial microbial colonization and accelerate the formation of extracellular biofilms, which eventually promotes the electrical power density by providing a conductive microenvironment for extracellular electron transfer. As the cathode, carbon-based materials can function as catalysts for the oxygen-reduction reaction, showing satisfying activities and efficiencies nowadays even reaching the performance of Pt catalysts. Here, first, recent advancements on the design of carbon materials for anodes in MFCs are summarized, and the influence of structure and surface functionalization of different types of carbon materials on microorganism immobilization and electrochemical performance is elucidated. Then, synthetic strategies and structures of typical carbon-based cathodes in MFCs are briefly presented. Furthermore, future applications of carbon-electrode-based MFC devices in the energy, environmental, and biological fields are discussed, and the emerging challenges in transferring them from laboratory to industrial scale are described.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.

Carbon nanotube modification of microbial fuel cell electrodes

The use of carbon nanotubes (CNTs) for energy harvesting devices is preferable due to their unique mechanical, thermal, and electrical properties. On the other hand, microbial fuel cells (MFCs) are promising devices to recover carbon-neutral energy from the organic matters, and have been hindered with major setbacks towards commercialization. Nanoengineered CNT-based materials show remarkable electrochemical properties, and therefore have provided routes towards highly effective modification of MFC compartments to ultimately reach the theoretical limits of biomass energy recovery, low-cost power production, and thus the commercialization of MFCs. Moreover, these CNT-based composites offer significant flexibility in the design of MFCs that enable their use for a broad spectrum of applications ranging from scaled-up power generation to medically related devices. This article reviews the recent advances in the modification of MFCs using CNTs and CNT-based composites, and the extent to which each modification route impacts MFC power and current generation.

A miniaturized microbial fuel cell with three-dimensional graphene macroporous scaffold anode demonstrating a record power density of over 10,000 W m(-3)

A microbial fuel cell (MFC) is a bio-inspired renewable energy converter which directly converts biomass into electricity. This is accomplished via the unique extracellular electron transfer (EET) of a specific species of microbe called the exoelectrogen. Many studies have attempted to improve the power density of MFCs, yet the reported power density is still nearly two orders of magnitude lower than other power sources/converters. Such a low performance can primarily be attributed to two bottlenecks: (i) ineffective electron transfer from microbes located far from the anode and (ii) an insufficient buffer supply to the biofilm. This work takes a novel approach to mitigate these two bottlenecks by integrating a three-dimensional (3D) macroporous graphene scaffold anode in a miniaturized MFC. This implementation has delivered the highest power density reported to date in all MFCs of over 10,000 W m(-3). The miniaturized configuration offers a high surface area to volume ratio and improved mass transfer of biomass and buffers. The 3D graphene macroporous scaffold warrants investigation due to its high specific surface area, high porosity, and excellent conductivity and biocompatibility which facilitates EET and alleviates acidification in the biofilm. Consequently, the 3D scaffold houses an extremely thick and dense biofilm from the Geobacter-enriched culture, delivering an areal/volumetric current density of 15.51 A m(-2)/31,040 A m(-3) and a power density of 5.61 W m(-2)/11,220 W m(-3), a 3.3 fold increase when compared to its planar two-dimensional (2D) control counterparts.

Bioinspired Nanosucker Array for Enhancing Bioelectricity Generation in Microbial Fuel Cells

A bioinspired active anode with a suction effect is demonstrated for microbial fuel cells by constructing polypyrrole (PPy) nanotubular arrays on carbon textiles. The oxygen in the inner space of the nanosucker can be depleted by micro-organisms with the capability of facul-tative respiration, forming a vacuum, which then activates the electrode to draw the microorganism by suction and thus improve the bioelectricity generation.

Nanotechnology to rescue bacterial bidirectional extracellular electron transfer in bioelectrochemical systems

Advanced nanostructured electrode materials largely improve the bacterial bidirectional extracellular electron transfer in bioelectrochemical systems.

Three-dimensional graphene/Pt nanoparticle composites as freestanding anode for enhancing performance of microbial fuel cells

Microbial fuel cells (MFCs) are able to directly convert about 50 to 90% of energy from oxidation of organic matters in waste to electricity and have great potential application in broad fields such as wastewater treatment. Unfortunately, the power density of the MFCs at present is significantly lower than the theoretical value because of technical limitations including low bacteria loading capacity and difficult electron transfer between the bacteria and the electrode. We reported a three-dimensional (3D) graphene aerogel (GA) decorated with platinum nanoparticles (Pt NPs) as an efficient freestanding anode for MFCs. The 3D GA/Pt-based anode has a continuous 3D macroporous structure that is favorable for microorganism immobilization and efficient electrolyte transport. Moreover, GA scaffold is homogenously decorated with Pt NPs to further enhance extracellular charge transfer between the bacteria and the anode. The MFCs constructed with 3D GA/Pt-based anode generate a remarkable maximum power density of 1460 mW/m(2), 5.3 times higher than that based on carbon cloth (273 mW/m(2)). It deserves to be stressed that 1460 mW/m(2) obtained from the GA/Pt anode shows the superior performance among all the reported MFCs inoculated with Shewanella oneidensis MR-1. Moreover, as a demonstration of the real application, the MFC equipped with the freestanding GA/Pt anode has been successfully applied in driving timer for the first time, which opens the avenue toward the real application of the MFCs.

Microscale microbial fuel cells: Advances and challenges

The next generation of sustainable energy could come from microorganisms; evidence that it can be seen with the given rise of Electromicrobiology, the study of microorganisms' electrical properties. Many recent advances in electromicrobiology stem from studying microbial fuel cells (MFCs), which are gaining acceptance as a future alternative "green" energy technology and energy-efficient wastewater treatment method. MFCs are powered by living microorganisms with clean and sustainable features; they efficiently catalyse the degradation of a broad range of organic substrates under natural conditions. There is also increasing interest in photosynthetic MFCs designed to harness Earth's most abundant and promising energy source (solar irradiation). Despite their vast potential and promise, however, MFCs and photosynthetic MFCs have not yet successfully translated into commercial applications because they demonstrate persistent performance limitations and bottlenecks associated with scaling up. Instead, microscale MFCs have received increasing attention as a unique platform for various applications such as powering small portable electronic elements in remote locations, performing fundamental studies of microorganisms, screening bacterial strains, and toxicity detection in water. Furthermore, the stacking of miniaturized MFCs has been demonstrated to offer larger power densities than a single macroscale MFC in terms of scaling up. In this overview, we discuss recent achievements in microscale MFCs as well as their potential applications. Further scientific and technological challenges are also reviewed.

Facile fabrication of carbon spheres with tunable morphologies from novel polymeric carbon precursors

This study presents a facile and general method for fabrication of carbon spheres with tunable morphologies based on the sol-gel reaction of a novel polymeric carbon precursor. The carbon precursor was fabricated by the synthesis of resole, a low-molecular weight polymer of phenol and formaldehyde, and then the modification with poly(ethylene glycol) monomethyl ether (PEG). By turning the modification degree of resole with different amounts of PEG and the hydrolysis and condensation reactions of this precursor, carbon spheres with various morphologies, including regular spheres, hollow spheres of different pore sizes, and raspberry- and peanut-like spheres, were produced easily. This should be attributed to the condensation, self-assembly, and phase separation of the new polymeric carbon precursors during the sol-gel process.

Carbon nanotube balls and their application in supercapacitors

We have provided a design of the macroscopic morphology of carbon nanotubes (CNTs) using emulsion droplet confinement. The evaporation of CNT-dispersed aqueous emulsion droplets in oil produces spherical CNT assemblies, i.e., CNT balls. In this emulsion-assisted method, compact packing of CNT was obtained by the presence of capillary pressure during droplet evaporation. The size of the CNT balls could be controlled by changing the concentration of the CNT dispersion solution; typically, CNT balls with an average size in the range of 8-12 μm were obtained with a Brunauer-Emmett-Teller (BET) specific area of 200 m(2)/g. Heat treatment of the CNT balls, which was required to remove residual solvent, and cement CNTs was followed, and their effect has been characterized; the heat treatment at high temperature desorbed surface oxygenated groups of CNTs and created defective carbon structures, but did not change pore structure. The dispersion of CNT balls was applied to form CNT ball-assembled film for a supercapacitor electrode. The specific capacitance of 80 F/g was obtained at 500 °C heat treatment, but the CNT balls prepared at a higher temperature actually decreased the capacitance, because of the removal of surface oxygenated groups, thereby decreasing the pseudo-capacitance. The capacitive properties of CNT ball-assembled electrodes were compared to CNT films; the CNT ball electrodes showed 40% higher specific electrochemical capacitance and higher rate performance, which is attributed to the compact packing of CNTs in the CNT ball and the hierarchical porous structures in the ball assemblies.