Cysteine-mediated aggregation of Au nanoparticles: the development of a H2O2 sensor and oxidase-based biosensors

Optical Bioassays Based on the Signal Amplification of Redox Cycling

Optical bioassays are challenged by the growing requirements of sensitivity and simplicity. Recent developments in the combination of redox cycling with different optical methods for signal amplification have proven to have tremendous potential for improving analytical performances. In this review, we summarized the advances in optical bioassays based on the signal amplification of redox cycling, including colorimetry, fluorescence, surface-enhanced Raman scattering, chemiluminescence, and electrochemiluminescence. Furthermore, this review highlighted the general principles to effectively couple redox cycling with optical bioassays, and particular attention was focused on current challenges and future opportunities.

Radiofrequency driving antitumor effect of graphene oxide-based nanocomposites: a Hill model analysis

Aim: This report proposes using the Hill model to assess the benchmark dose, the 50% lethal dose, the cooperativity and the dissociation constant while analyzing cell viability data using nanomaterials to evaluate the antitumor potential while combined with radiofrequency therapy. Materials & methods: A nanocomposite was synthesized (graphene oxide-polyethyleneimine-gold) and the viability was evaluated using two tumor cell lines, namely LLC-WRC-256 and B16-F10. Results: Our findings demonstrated that while the nanocomposite is biocompatible against the LLC-WRC-256 and B16-F10 cancer cell lines in the absence of radiofrequency, the application of radiofrequency enhances the cell toxicity by orders of magnitude. Conclusion: This result points to prospective studies with the tested cell lines using tumor animal models.

Sensitive detection of extracellular hydrogen peroxide using plasmon-enhanced electrochemical activity on Pd-tipped Au nanobipyramids

The fabrication of electroactive nanostructures with high electron concentration and specific electron transport is crucial for electrochemical sensing. In this study, a plasmon-enhanced electrochemical sensor has been developed for the detection of extracellular hydrogen peroxide (H2O2) from cancer cells, utilizing Pd-tipped Au nanobipyramids (PTA NBPs) as the electrocatalysts. Plasmonic PTA NBPs were synthesized by depositing Pd nanoparticles onto the tips of Au nanobipyramids (Au NBPs). Under excitation of localized surface plasmon resonance (LSPR), the PTA NBPs generate high-energy electron-hole pairs (e-/h+) on their surface. The generated electrons (e-) significantly enhance the electrochemical reduction of H2O2. Based on this, a plasmon-enhanced H2O2 electrochemical sensor is constructed with high sensitivity (986.57 μA mM-1 cm-2), low detection limit (0.02 μM), wide linear range (0.1 μM to 980 μM), and good stability and repeatability. Moreover, this sensor also enables the measurement of extracellular H2O2 derived from cancer cells (MCF-7), highlighting its potential applications in cellular biology and biomedical research.

Dual-aptamer-based enzyme linked plasmonic assay for pathogenic bacteria detection

Development of rapid, sensitive, and selective method for pathogenic bacteria detection is of great importance for food safety, medical diagnostic, and environmental monitoring. Currently, most techniques for low numbers of bacteria detection require advanced instrumentation or skilled operators. Herein, we present a facile colorimetric detection platform for bacterial detection using Ag nanoplates as chromogenic substrate, which takes advantages of the high specificity and affinity of aptamer and the ability of catalase to hydrolyze H₂O₂ that can etch Ag nanoplates. By introducing catalase to the sandwich structure composed by dual-aptamer recognition strategy, bacteria detection signal is converted to the peak shift of LSPR and colorimetric change. This proposed method allows a fast naked-eye detection of S. aureus at the concentration of 60 CFU/mL based on the combination of streptavidin-biotin system and inherent sensitivity of plasmonic Ag nanoplates. Owing to the high selectivity and sensitivity, as well as the low-cost and good adaptability, this plasmonic assay is expected to be suitable for pathogenic bacteria detection in resource-limited settings.

Surface Functionalization of Enzyme-Coronated Gold Nanoparticles with an Erythrocyte Membrane for Highly Selective Glucose Assays

Colorimetric glucose sensors using enzyme-coronated gold nanoparticles have been developed for high-throughput assays to monitor the blood glucose levels of diabetic patients. Although those sensors have shown sensitivity and wide linear detection ranges, they suffer from poor selectivity and stability in detecting blood glucose, which has limited their practical use. To address this limitation, herein, we functionalized glucose-oxidase-coronated gold nanoparticles with an erythrocyte membrane (EM-GOx-GNPs). Because the erythrocyte membrane (EM) selectively facilitates the permeation of glucose via glucose transporter-1 (GLUT1), the functionalization of GOx-GNPs with EM improved the stability, selectivity (3.3- to 15.8-fold higher), and limit of detection (LOD). Both membrane proteins, GLUT1 and aquaporin-1 (AQP1), on EM were shown to be key components for selective glucose detection by treatment with their inhibitors. Moreover, we demonstrated the stability of EM-GOx-GNPs in high-antioxidant-concentration conditions, under long-term storage (∼4 weeks) and a freeze-thaw cycle. Selectivity of the EM-GOx-GNPs against other saccharides was increased, which improved the LOD in phosphate-buffered saline and human serum. Our results indicated that the functionalization of colorimetric glucose sensors with EM is beneficial for improving selectivity and stability, which may make them candidates for use in a practical glucose sensor.

Dual-mode sensing of biomarkers based on nano 3D Cu-Flo.@AuNPs-electrocatalyzed oxidation of glucose inducing in-situ H2O2-generation system

A bimodal 3D-electrochemiluminescence (ECL) analysis method was developed, which integrated simpleness, label-free, high-throughput and real time detection together. Firstly, a novel 3D copper-based nanosheet micro-material (Cu-Flo. NMs) coupled with gold nanoparticles/Cysteine (Cu-Flo.@AuNPs-Cys) was prepared to use as the versatile label for both colorimetric and ECL techniques. The 3D-Cu-Flo.@AuNPs-Cys having glucose oxidase-like activity could catalyze glucose to produce H₂O₂ in situ, which was further found to be capable of exhibiting a 30.95-fold higher ECL-intensity for luminol than bare glassy carbon electrodes (GCE). Taking advantages of the 3D-Cu-Flo.@AuNPs-Cys above, a colorimetric and ECL-channel sensor (GCE/3D-Cu-Flo.@AuNPs-Cys) were constructed simultaneously for glucose detection. The fabricated sensor displayed a wide linear range (Glucose: 0.001-50 mmol L^-1, AFP: 2.25 × 10^-7-225 ng mL^-1), impressive low limit of detection (Glucose: 1.27 × 10^-7 mol L^-1, AFP: 1.92 × 10^-8 ng mL^-1, S/N = 3) and acceptable recovery (Glucose: 94% ∼ 104%, AFP: 96.04% ∼ 102.29%) in practical sample. Furthermore, the biosensor showed ultrafast (0.5 min) analysis efficiency, high stability for 6 cyclic potential scans and satisfactory reproducibility for 7 repeated tests. These results demonstrated the proposed 3D dual-modal ECL-biosensor for biomarkers detection had a great potential in clinical diagnostics, promoting the application in biomedical researching and POCT.

Detection of monoamine oxidase B using dark-field light scattering imaging and colorimetry

Detection of MAO-B using dark-field light scattering imaging and colorimetry based on localized surface plasmon resonance induced by silver deposited gold nanostars.

Nanoparticle-based colorimetric sensors to detect neurodegenerative disease biomarkers

Neurodegenerative disorders (NDDs) are progressive, incurable health conditions that primarily affect brain cells, and result in loss of brain mass and impaired function. Current sensing technologies for NDD detection are limited by high cost, long sample preparation, and/or require skilled personnel. To overcome these limitations, optical sensors, specifically colorimetric sensors, have garnered increasing attention towards the development of a cost-effective, simple, and rapid alternative approach. In this review, we evaluate colorimetric sensing strategies of NDD biomarkers (e.g. proteins, neurotransmitters, bio-thiols, and sulfide), address the limitations and challenges of optical sensor technologies, and provide our outlook on the future of this field.

Synthesis of a clustered carbon aerogel interconnected by carbon balls from the biomass of taros for construction of a multi-functional electrochemical sensor

In this study, a clustered carbon aerogel interconnected by carbon balls (CCAI-CB) was prepared as an electrode material to construct a multi-functional electrochemical sensor. CCAI-CB derived from taros (Colocasia esculenta (L). Schott) possesses meso-macroporous structure and plenty of defective sites, and shows notable activity in electrocatalysis as an electrode material. We investigated the application of CCAI-CB modified glassy carbon electrode (CCAI-CB/GCE) for determination of ascorbic acid (AA) and hydrogen peroxide (H₂O₂). Compared with carbon nanotubes (CNTs) modified GCE (CNTs/GCE) and bare GCE, CCAI-CB/GCE shows lower detection limit (0.23 μM for AA and 1.31 μM, S/N = 3), higher sensitivities (220.53, 148.86 or 94.39 μA mM^-1 cm^-2 for AA and 83.06 or 49.07 μA mM^-1 cm^-2 for H₂O₂). Concentrations of AA and H₂O₂ in real samples were determined at CCAI-CB/GCE with satisfactory detection results obtained. In addition, when the CCAI-CB/GCE was used for electrocatalysis of other biomolecules, it also exhibits high electrochemical activity. Thus, CCAI-CB could be a promising electrode material for the construction of multi-functional electrochemical sensors.

Facile one-pot synthesis of Mn3O4 nanorods and their analytical application

One-pot synthesis of Mn3O4 nanorods in aqueous solution at room temperature without using templates and surfactants was achieved for the first time, opening a new route for preparing various metal nanorods for detecting H2O2-related targets.

Pressure-induced assemblies and structures of graphitic-carbon sheet encapsulated Au nanoparticles

A novel strategy of using hydrostatic pressures to synthesize gold-carbon (Au-C) nanohybrid materials is explored. The stable face-centered-cubic (fcc) Au undergoes a structural phase transition to a mixture of primitive orthorhombic and cubic phases as the carbon phase acquires a highly ordered onion-like carbon (OLC) structure which encapsulates the Au nanoparticles, thereby exerting an additional pressure. Increasing the pressure results in a one dimensional (1-D) chain-like structure with the primitive cubic Au nanoparticles contained in an amorphous carbon matrix. The OLC structure allows the formation of quenchable Au nanoparticle phases with the primitive close packing and Au-C hybrids with new mesoscopic structures. Under pressure, we observe the formation of a hybrid material composed of a poorly conducting matrix made of amorphous carbon and conducting OLC-encapsulated Au nanoparticles. The electrical conductivity of this hybrid material under pressure reveals a percolation threshold. We present a new synthesis approach to explore the interplay between atomic and mesoscopic structures and the electrical conductivity of metal hybrid structures.

Assessing the range of enzymatic and oxidative tunability for biosensor design

Development of multi-functional materials and biosensors that can achieve an in situ response designed by the user is a current need in the biomaterials field, especially in complex biological environments, such as inflammation, where multiple enzymatic and oxidative signals are present. In the past decade, there has been extensive research and development of materials chemistries for detecting and monitoring enzymatic activity, as well as for releasing therapeutic and diagnostic agents in regions undergoing oxidative stress. However, there has been limited development of materials in the context of enzymatic and oxidative triggers together, despite their closely tied and overlapping mechanisms. With research focusing on enzymatically and oxidatively triggered materials separately, these systems may be inadequate in monitoring the complexity of inflammatory environments, thus limiting in vivo translatability and diagnostic accuracy. The intention of this review is to highlight a variety of enzymatically and oxidatively triggered materials chemistries to draw attention to the range of synthetic tunability available for the construction of novel biosensors with a spectrum of programmed responses. We focus our discussion on several types of macromolecular sensors, generally classified by the causative material response driving ultimate signal detection. This includes sensing based on degradative processes, conformational changes, supramolecular assembly/disassembly, and nanomaterial interactions, among others. We see each of these classes providing valuable tools toward coalescing current gaps in the biosensing field regarding specificity, selectivity, sensitivity, and flexibility in application. Additionally, by considering the materials chemistry of enzymatically and oxidatively triggered biomaterials in tandem, we hope to encourage synthesis of new biosensors that capitalize on their synergistic roles and overlapping mechanisms in inflammatory environments for applications in disease diagnosis and monitoring.

Expanded mesoporous silica-encapsulated ultrasmall Pt nanoclusters as artificial enzymes for tracking hydrogen peroxide secretion from live cells

Design of synthetic structures that possess the similar functions to natural enzymes held great promise in environmental detection and biomedical application. Herein, a new concept for the fabrication of solid-supported catalysts as peroxidase mimic have been proposed to realize high-catalytic activity and stability by utilizing expanded mesoporous silica (EMSN)-encapsulated Pt nanoclusters. Compared with PtNCs, the introduction of amino group modified EMSN would enrich H₂O₂ on the surface of PtNCs and increase the catalytic sites for H₂O₂ decomposition, which gave rise to the higher catalytic activity of EMSN-PtNCs over a broad pH range, especially in weakly acidic and neural solutions. This would facilitate their applications for real-time monitoring the secretion of H₂O₂ from living cancer cells stimulated by various anticancer drugs. Our findings not only pave the way to use porous matrix as the structural component for the design of the biomimetic catalysts, but also provide a simple and reliable platform to monitor H₂O₂ released from living cells in real time, which holds great potential for elucidating the biological roles of H₂O₂ and underlying molecular mechanisms of drug cytotoxicity as well as drug therapeutic effects.

Thiol inhibition of Hg cold vapor generation in SnCl2/NaBH4 system: A homogeneous bioassay for H2O2/glucose and butyrylcholinesterase/pesticide sensing by atomic spectrometry

Recently, the use of atomic spectrometry (AS) for biochemical analysis has attracted considerable attention due to its high sensitivity, selectivity and anti-interference ability. In this work, we conducted a detailed study on a phenomenon of thiol inhibition of mercury (Hg²⁺) cold vapor generation (CVG) and found _L-cysteine (_L-Cys), glutathione (GSH), dithiothreitol, N-Acetyl-L-cysteine, 3-mercaptopropionic acid, β-mercaptoethanol, and NaI can inhibit the CVG of Hg²⁺, while EDTA has no inhibitory effect. Furthermore, changing the content of -SH can effectively adjust the CVG atomic fluorescence spectrometer (CVG-AFS) signal of Hg²⁺. As as a consequence, an AS-based homogeneous bioassay was constructed by adjusting the oxidation ratio and production quantity of -SH in the system. The quantitative analysis of the system was demonstrated by using AFS as a representative detector. Hydrogen peroxide (H₂O₂) and glucose were used as representative analytes for the validation of Hg²⁺ atomic fluorescence signal turn-off strategy, and butyrylcholinesterase (BChE) as well as parathion (organophosphorus pesticides, OPs) as utilized as representative targets for the signal turn-on strategy. Under optimal experimental conditions, the homogeneous CVG-AFS sensor can be successfully used to detect 3 μM H₂O₂, 30 μM glucose, 0.25 U/L BChE, and 0.4 μg/mL parathion. In addition, the detection results of glucose and BChE in human serum samples agreed well with those obtained by using glucometer and kit, showing the promising potential of this method for practical applications. Therefore, this work provides a perspective for the construction of AS-based homogeneous bioassays and shows great potential for the detection of biomarkers.

High peroxidase-mimicking activity of gold@platinum bimetallic nanoparticle-supported molybdenum disulfide nanohybrids for the selective colorimetric analysis of cysteine

A sensitive and selective colorimetric sensor was designed for cysteine detection based on a high activity peroxidase-mimicking gold@platinum bimetallic nanoparticle-supported molybdenum disulfide nanohybrid.

Leek-derived codoped carbon dots as efficient fluorescent probes for dichlorvos sensitive detection and cell multicolor imaging

A biomass nitrogen and sulfur codoped carbon dots (NS-Cdots) was prepared by a simple and clean hydrothermal method using leek, and was employed as efficient fluorescent probes for sensitive detection of organophosphorus pesticides (OPs). The leek-derived NS-Cdots emitted blue fluorescence, but was quenched by H₂O₂. Due to acetylcholinesterase/choline oxidase-based cascade enzymatic reaction that produces H₂O₂ and the inhibition effect of OPs on acetylcholinesterase activity, a NS-Cdots-based fluorescence "off-on" method to detect OPs-dichlorvos (DDVP) was developed. More sensitivity and wider linear detection range were achieved from 1.0 × 10^-9 to 1.0 × 10^-3 M (limit of detection = 5.0 × 10^-10 M). This developed method was applied to the detection of DDVP in Chinese cabbage successfully. The average recoveries were in the range of 96.0~104.0% with a relative standard deviation of less than 3.3%. In addition, the NS-Cdots fluorescent probes were also employed successfully in multicolor imaging of living cells, manifesting that the NS-Cdots fluorescent probes have great application potential in agricultural and biomedical fields. Graphical Abstract.

Single-Atom-Thick Active Layers Realized in Nanolaminated Ti3(AlxCu1-x)C2 and Its Artificial Enzyme Behavior

A Ti₃(Al_xCu_1-x)C₂ phase with Cu atoms with a degree of ordering in the A plane is synthesized through the A site replacement reaction in CuCl₂ molten salt. The weakly bonded single-atom-thick Cu layers in a Ti₃(Al_xCu_1-x)C₂ MAX phase provide actives sites for catalysis chemistry. As-synthesized Ti₃(Al_xCu_1-x)C₂ presents unusual peroxidase-like catalytic activity similar to that of natural enzymes. A fabricated Ti₃(Al_xCu_1-x)C₂/chitosan/glassy carbon electrode biosensor prototype also exhibits a low detection limit in the electrochemical sensing of H₂O₂. These results have broad implications for property tailoring in a nanolaminated MAX phase by replacing the A site with late transition elements.

Aggregation-induced emission of copper nanoclusters triggered by synergistic effect of dual metal ions and the application in the detection of H2O2 and related biomolecules

Recently, the aggregation-induced emission (AIE) of nanoclusters triggered by metal ions has been received great attentions. However, the good AIE efficiency usually requires excessive metal ions, which may result in an undesired competition between metal ions and targets. In this work, by the synergistic effect of Pb²⁺ and Zr⁴⁺, a fewer amounts of metal ions can induce more aggregates of glutathione-capped Cu nanoclusters (CSH-CuNCs), resulting in a higher AIE efficiency. Next, by virtue of the oxidative property of H₂O₂, the AIE of GSH-CuNCs-Pb²⁺-Zr⁴⁺ system quenches linearly with the concentration of H₂O₂ from 1 to 60 μmol/L. Moreover, many biological substrates, such as glucose and cholesterol, can generate H₂O₂ in the presence of their specific oxidases and O₂. Therefore, the detection of glucose or cholesterol can also be achieved by the proposed method, and the limits of detection of glucose and cholesterol are 0.37 and 2.7 μmol/L, respectively. Finally, this method has been validated to be sensitive and selective for glucose or cholesterol detection in human serum samples.

Plasmonic Detection of Glucose in Serum Based on Biocatalytic Shape-Altering of Gold Nanostars

Nanoparticles have been used as signal transducers for optical readouts in biosensors. Optical approaches are cost-effective with easy readout formats for clinical diagnosis. We present a glucose biosensor based on the biocatalytic shape-altering of gold nanostars via silver deposition. Improved sensitivity was observed due to the nanostars clustering after being functionalised with glucose oxidase (GOx). The biosensor quantified glucose in the serum samples with a 1:1000 dilution factor, and colorimetrically distinguished between the concentrations. The assay demonstrated good specificity and sensitivity. The fabricated glucose biosensor is a rapid kinetic assay using a basic entry level laboratory spectrophotometric microplate reader. Such a biosensor could be very useful in resource-constrained regions without state-of-the-art laboratory equipment. Furthermore, naked eye detection of glucose makes this a suitable biosensor for technology transfer to other point-of-care devices.

Framework Nucleic Acid-Enabled Programming of Electrochemical Catalytic Properties of Artificial Enzymes

The creation and engineering of artificial enzymes remain a challenge, especially the arrangement of enzymes into geometric patterns with nanometer precision. In this work, we fabricated a series of novel DNA-tetrahedron-scaffolded-DNAzymes (Tetrazymes) and evaluated the catalytic activity of these Tetrazymes by electrochemistry. Tetrazymes were constructed by precisely positioning G-quadruplex on different sites of a DNA tetrahedral framework, with hemin employed as the co-catalyst. Immobilization of Tetrazymes on a gold electrode surface revealed horseradish peroxidase (HPR)-mimicking bioelectrocatalytic property. Cyclic voltammogram and amperometry were employed to evaluate the capability of Tetrazymes of different configurations to electrocatalyze the reduction of hydrogen peroxide (H₂O₂). These artificial Tetrazymes displayed 6- to 14-fold higher enzymatic activity than G-quadruplex/hemin (G4-hemin) without the DNA tetrahedron scaffold, demonstrating application potential in developing novel G-quadruplex-based electrochemical sensors.

One-pot synthesized Cu/Au/Pt trimetallic nanoparticles as a novel enzyme mimic for biosensing applications

Multimetallic nanomaterials have aroused special attention owing to the unique characteristics of chemical, optical and enhanced enzyme mimetic capabilities resulting from the synergistic effect of different metal elements. In this work, we present a facile, gentle, fast and one-pot method for preparing Cu/Au/Pt trimetallic nanoparticles (TNPs), which possess intrinsic and enhanced peroxidase-like activity as well as excellent stability, sustainable catalytic activity, and robustness to harsh environments. Kinetic analysis indicated that Cu/Au/Pt TNPs exhibited strong affinities with H2O2 and 3,3,5,5-tetramethylbenzidine (TMB) as the substrates. To investigate the feasibility of Cu/Au/Pt TNPs-based strategy in biological analysis, H2O2 was chosen as a model analyte and a sensitive and specific detection for H2O2 was acquired with a detection limit of 17 nM. By coupling with glucose oxidase (GOD), this assay could also achieve a sensitive and selective detection of glucose with a detection limit of 33 μM, indicating the versatility of the method. In view of the potential combination with diverse enzyme-related reactions, the Cu/Au/Pt TNPs-based strategy is promising as a universal platform for biosensors.

Fluorescent protein nanoparticles: Synthesis and recognition of cellular oxidation damage

Intracellular reactive oxygen species (ROS) generation are associated with many diseases. Lots of studies focus on the detection of intracellular ROS by small fluorescent molecules. However, ROS recognized by biocompatible nanoparticles are relatively less reported. It is widely known that albumin-based nanomaterials possess unique advantages in biomedical applications because they are biodegradable and biocompatible. Herein, fluorescent protein nanoparticles (PNPs) were prepared using BSA as a starting material without introducing extra fluorescent molecules. The blue fluorescent PNPs were well characterized by FL, FTIR, CD, TEM, DLS, etc. It was revealed that the PNPs exhibited two types of emissive centers through FL spectra and the fluorescence lifetimes. Further mechanism study indicated that the fluorescence of the PNPs was mainly derived from three kinds of aromatic amino acids, namely tryptophan, tyrosine and phenylalanine. Moreover, the fluorescence properties of the PNPs were tightly related to pH. The PNPs displayed excellent stabilities under harsh conditions as well as physiological conditions. In addition, the PNPs (200 μg/mL) were nontoxic to HeLa and GES-1 cell lines, showing good biocompatibility. The cellular uptake of PNPs was occurred only when the cells were stressed with glucose oxidase or H₂O₂, thereafter the bright blue fluorescence was observed, indicating that it could be utilized for the recognition of cellular oxidation damage. These findings will offer novel clues for the future synthesis of even brighter protein nanoparticles and their biomedical applications.

Interfacial Assembly of Signal Amplified Multienzymes and Biorecognized Antibody into Proteinosome for an Ultrasensitive Immunoassay

Enzyme as signal tag has been widely employed in colorimetric immunoassays for decades. Nevertheless, it remains a great challenge to substantially improve the detection sensitivity of enzyme-based immunoassays, which inhibits further critical applications. To circumvent this confinement, a multifunctional self-assembled proteinosome based on the integration of signal amplification elements (enzyme) and biorecognition unit (antibody) is proposed for fabricating an immunoassay strategy with significantly enhanced sensitivity. Owing to the self-assembly technique, this proteinosome not only efficiently loads abundant enzymes to possess high catalytic activity, but also enhances enzymatic stability and maintains recognition ability of antibody. Using imidacloprid as a model target, the proteinosome-based immunoassay reaches a limit of detection down to the picogram mL^-1 level, which is 150-fold lower than that of conventional enzyme-linked immunosorbent assay. This method provides a versatile approach for constructing spherical proteinosome as a recognizer and amplifier for profiling a broad range of target antigen.

DNA-Based Hydrogels Loaded with Au Nanoparticles or Au Nanorods: Thermoresponsive Plasmonic Matrices for Shape-Memory, Self-Healing, Controlled Release, and Mechanical Applications

Gold nanoparticles (AuNPs) or gold nanorods (AuNRs) are loaded in polyacrylamide hydrogels cooperatively cross-linked by bis-acrylamide and nucleic acid duplexes or boronate ester-glucosamine and nucleic acid duplexes. The thermoplasmonic properties of AuNPs and AuNRs are used to control the stiffness of the hydrogels. The irradiation of the AuNP-loaded (λ = 532 nm) or the AuNR-loaded (λ = 808 nm) hydrogels leads to thermoplasmonic heating of the hydrogels, the dehybridization of the DNA duplexes, and the formation of hydrogels with lower stiffness. By ON/OFF irradiation, the hydrogels are switched between low- and high-stiffness states. The reversible control over the stiffness properties of the hydrogels is used to develop shape-memory hydrogels and self-healing soft materials and to tailor thermoplasmonic switchable drug release. In addition, by designing bilayer composites of AuNP- and AuNR-loaded hydrogels, a reversible thermoplasmonic, light-induced bending is demonstrated, where the bending direction is controlled by the stress generated in the respective bilayer composite.

One-pot synthesized Cu/Au/Pt trimetallic nanoparticles with enhanced catalytic and plasmonic properties as a universal platform for biosensing and cancer theranostics

Cu/Au/Pt trimetallic nanoparticles (TMNPs) with enhanced catalytic activity and intense plasmonic absorption in the NIR-I biowindow (650-950 nm) were prepared using a fast, gentle and one-pot protocol. Based on these properties and assembly of thiolated-aptamers on Cu/Au/Pt TMNPs, a universal platform was developed for applications in biosensing and theranostics.

Yolk–shell structured Au@Ag@mSiO2 as a probe for sensing cysteine enantiomers and Cu2+ based on circular dichroism

Novel yolk–shell structured Au@Ag@mSiO₂ was fabricated and used as a probe for recognition and quantification of cysteine enantiomers and Cu²⁺.

Synthesis of benzimidazolones by immobilized gold nanoparticles on chitosan extracted from shrimp shells supported on fibrous phosphosilicate

We demonstrate the synthesis of benzimidazolones from o-phenylenediamines and CO₂ in the presence of gold nanoparticles supported on a composite material based on microcrystalline chitosan from shrimp shells and fibrous phosphosilicate.

Fabrication of prime number checkers based on colorimetric responses of gold nanoparticles

In this work, we demonstrated the fabrication of molecular prime number checkers based on the concentration- and sequence-dependent colorimetric responses of citrate-capped gold nanoparticles (Au NPs) to two simple model chemicals, i.e. cysteine (Cys) and Hg²⁺ ions.

Hydrogels Incorporating Au@Polydopamine Nanoparticles: Robust Performance for Optical Sensing

Stimuli-responsive hydrogels (SRhG) that undergo response to physicochemical stimuli have been broadly applied in separation, biosensing, and drug delivery. Since, most of the SRhG are based on the structural behaviors (swelling or collapse). Herein, we describe a more simple and convenient colorimetric SRhG of polydopamine-coated gold nanoparticles (Au@PDA NPs) hydrogel. The newly developed SRhG is based on the in situ surface chemistry of Au@PDA NPs with core-shell structure embedding in agarose hydrogel. Silver ions can in situ form Ag NPs on surfaces of Au@PDA NPs (Ag_Au@PDA NPs with core-satellites like structure) at ambient conditions, which shift the localized surface plasmon resonance (LSPR) absorption peak and result in color change. The solid sensing phase of SRhG shows greatly improved stability and anti-interference ability comparing to that of solution phase sensing. With rational designs, Au@PDA NPs hydrogel shows great potential in optical sensing, for example, biothiol detection, and coupled with enzyme-cascade reaction for acetylcholinesterase activity detection and inhibitor assays with excellent sensitivity and selectivity.

A Robust Liposomal Platform for Direct Colorimetric Detection of Sphingomyelinase Enzyme and Inhibitors

The enzyme sphingomyelinase (SMase) is an important biomarker for several diseases such as Niemann Pick's, atherosclerosis, multiple sclerosis, and HIV. We present a two-component colorimetric SMase activity assay that is more sensitive and much faster than currently available commercial assays. Herein, SMase-triggered release of cysteine from a sphingomyelin (SM)-based liposome formulation with 60 mol % cholesterol causes gold nanoparticle (AuNP) aggregation, enabling colorimetric detection of SMase activities as low as 0.02 mU/mL, corresponding to 1.4 pM concentration. While the lipid composition offers a stable, nonleaky liposome platform with minimal background signal, high specificity toward SMase avoids cross-reactivity of other similar phospholipases. Notably, use of an SM-based liposome formulation accurately mimics the natural in vivo substrate: the cell membrane. We studied the physical rearrangement process of the lipid membrane during SMase-mediated hydrolysis of SM to ceramide using small- and wide-angle X-ray scattering. A change in lipid phase from a liquid to gel state bilayer with increasing concentration of ceramide accounts for the observed increase in membrane permeability and consequent release of encapsulated cysteine. We further demonstrated the effectiveness of the sensor in colorimetric screening of small-molecule drug candidates, paving the way for the identification of novel SMase inhibitors in minutes. Taken together, the simplicity, speed, sensitivity, and naked-eye readout of this assay offer huge potential in point-of-care diagnostics and high-throughput drug screening.

Highly sensitive visual detection of amantadine residues in poultry at the ppb level: A colorimetric immunoassay based on a Fenton reaction and gold nanoparticles aggregation

Colorimetric biosensors for the on-site visual detection of veterinary drug residues are required for food control in developing countries and other resource-constrained areas, where sophisticated instruments may not be available. In this study, we developed a highly sensitive immunoassay for amantadine residues in poultry. By introducing a novel signal generation strategy into an indirect competitive immunoassay, a highly sensitive assay for amantadine residues in chicken was achieved for naked eye readout at the part per billion (ppb) level. Signal amplification was achieved in the designed immunoassay by combining conventional indirect competitive enzyme-linked immunosorbent assay, Fenton reaction-regulated oxidation of cysteine, and gold nanoparticle aggregation. Therefore, the cascade reaction remarkably enhanced the assay sensitivity and led to a pronounced color change from red to dark purple in the solution, which could be easily distinguished with the naked eye even at approximately 1 μg kg^-1 in poultry muscle. Moreover, the color change can be quantitatively assayed with a classic high-throughput plate reader for contaminated poultry samples. The limit of detection (LOD) was 0.51 nM (0.095 ng mL^-1). The recovery rates for spiked chicken samples ranged from 78% to 84% with relative standard deviations <15%. Therefore, we propose that this immunoassay could be generally applicable for on-site detection in the field of food control.

Secondary structure-induced aggregation by hydrogen peroxide: a stimuli-triggered open/close implementation by recombination

The fabrication of reactive aggregation nanomaterials through assemblies in a facile and cost-effective manner is much desired but remains to be well explored. Here we show that exquisite and ultra-long (>2 μm) hybrid polymer nanorods (NRs) can be formed by a simple self-assembly of a phenylboronic acid modified genistein crosslinker (Ge-di(HMPBA-pin)) and d-α-tocopheryl polyethylene glycol 1000 (TPGS). The obtained NRs exhibit quantitative and sensitive colorimetric detection of H₂O₂ with a remarkable detection limit for different stromal materials. More significantly, the presence of H₂O₂ triggers a distinct morphological transformation of the polymer NR assembly into the secondary structure of micelles via the oxidative deboronation of boronate moieties in HMPBA-pin-SA. It spontaneously induces the aggregation of metal nanoparticles (Au NPs), metal nanorods (Au NRs), quantum dots (MoS₂ QDs), metal ions (Cu²⁺), protein (ferritin) and tetraphenylethene (TPE) molecules, giving rise to a dramatic stimuli-triggered open/close switchable complexation and apparent colorimetric transitions in vitro. This study, for the first time, showcases the fascinating advantages of such unprecedented secondary structure-induced aggregation and uncovers the immense potential to design a plethora of other sensing systems by virtue of the alternate trigger-specific, sacrifice-aggregated building moieties.

An update on smart biocatalysts for industrial and biomedical applications

Recently, smart biocatalysts, where enzymes are conjugated to stimuli-responsive (smart) polymers, have gained significant attention. Based on the presence or absence of external stimuli, the polymer attached to the enzyme changes its conformation to protect the enzyme from the external environment and regulate the enzyme activity, thus acting as a molecular switch. Owing to this behaviour, smart biocatalysts can be separated easily from a reaction mixture and re-used several times. Several such smart polymer-based biocatalysts have been developed for industrial and biomedical applications. In addition, they have been used in biosensors, biometrics and nano-electronic devices. This review article covers recent advances in developing different kinds of stimuli-responsive enzyme bioconjugates, including conjugation strategies, and their applications.

Detection of nucleic acids via G-quadruplex-controlled l-cysteine oxidation and catalyzed hairpin assembly-assisted signal amplification

A novel homogeneous strategy for detection of DNA via biomimetic synthesis of luminescent QDs coupled with nucleic acid signal amplification.