Evidence of unfolded protein translocation through a protein nanopore

Translocation of linearized full-length proteins through an engineered nanopore under opposing electrophoretic force

Nanopores have recently been used to identify and fingerprint proteins. However, because proteins, unlike DNA, do not have a uniform charge, the electrophoretic force cannot in general be used to translocate or linearize them. Here we show that the introduction of sets of charges in the lumen of the CytK nanopore spaced by ~1 nm creates an electroosmotic flow that induces the unidirectional transport of unstructured natural polypeptides against a strong electrophoretic force. Molecular dynamics simulations indicate that this electroosmotic-dominated force has a strength of ~20 pN at -100 mV, which is similar to the electric force on single-stranded DNA. Unfolded polypeptides produce current signatures as they traverse the nanopore, which may be used to identify proteins. This approach can be used to translocate and stretch proteins for enzymatic and non-enzymatic protein identification and sequencing.

Unravelled proteins form blobs during translocation across nanopores

The electroosmotic-driven transport of unravelled proteins across nanopores is an important biological process that is now under investigation for the rapid analysis and sequencing of proteins. For this approach to work, however, it is crucial that the polymer is threaded in single file. Here we found that, contrary to the electrophoretic transport of charged polymers such as DNA, during polypeptide translocation blob-like structures typically form inside nanopores. Comparisons between different nanopore sizes, shapes and surface chemistries showed that under electroosmotic-dominated regimes single-file transport of polypeptides can be achieved using nanopores that simultaneously have an entry and an internal diameter that is smaller than the persistence length of the polymer, have a uniform non-sticky ( i . e . non-aromatic) nanopore inner surface, and using moderate translocation velocities.

Unidirectional single-file transport of full-length proteins through a nanopore

The electrical current blockade of a peptide or protein threading through a nanopore can be used as a fingerprint of the molecule in biosensor applications. However, threading of full-length proteins has only been achieved using enzymatic unfolding and translocation. Here we describe an enzyme-free approach for unidirectional, slow transport of full-length proteins through nanopores. We show that the combination of a chemically resistant biological nanopore, α-hemolysin (narrowest part is ~1.4 nm in diameter), and a high concentration guanidinium chloride buffer enables unidirectional, single-file protein transport propelled by an electroosmotic effect. We show that the mean protein translocation velocity depends linearly on the applied voltage and translocation times depend linearly on length, resembling the translocation dynamics of ssDNA. Using a supervised machine-learning classifier, we demonstrate that single-translocation events contain sufficient information to distinguish their threading orientation and identity with accuracies larger than 90%. Capture rates of protein are increased substantially when either a genetically encoded charged peptide tail or a DNA tag is added to a protein.

Nanopore Discrimination of Coagulation Biomarker Derivatives and Characterization of a Post-Translational Modification

One of the most important health challenges is the early and ongoing detection of disease for prevention, as well as personalized treatment management. Development of new sensitive analytical point-of-care tests are, therefore, necessary for direct biomarker detection from biofluids as critical tools to address the healthcare needs of an aging global population. Coagulation disorders associated with stroke, heart attack, or cancer are defined by an increased level of the fibrinopeptide A (FPA) biomarker, among others. This biomarker exists in more than one form: it can be post-translationally modified with a phosphate and also cleaved to form shorter peptides. Current assays are long and have difficulties in discriminating between these derivatives; hence, this is an underutilized biomarker for routine clinical practice. We use nanopore sensing to identify FPA, the phosphorylated FPA, and two derivatives. Each of these peptides is characterized by unique electrical signals for both dwell time and blockade level. We also show that the phosphorylated form of FPA can adopt two different conformations, each of which have different values for each electrical parameter. We were able to use these parameters to discriminate these peptides from a mix, thereby opening the way for the potential development of new point-of-care tests.

Machine Learning Prediction of the Transmission Function for Protein Sequencing with Graphene Nanoslit

Protein sequencing has rapidly changed the landscape of healthcare and life science by accelerating the growth of diagnostics and personalized medicines for a variety of fatal diseases. Next-generation nanopore/nanoslit sequencing is promising to achieve single-molecule resolution with chromosome-size-long readability. However, due to inherent complexity, high-throughput sequencing of all 20 amino acids demands different approaches. Aiming to accelerate the detection of amino acids, a general machine learning (ML) method has been developed for quick and accurate prediction of the transmission function for amino acid sequencing. Among the utilized ML models, the XGBoost regression model is found to be the most effective algorithm for fast prediction of the transmission function with a very low test root-mean-square error (RMSE ∼0.05). In addition, using the random forest ML classification technique, we are able to classify the neutral amino acids with a prediction accuracy of 100%. Therefore, our approach is an initiative for the prediction of the transmission function through ML and can provide a platform for the quick identification of amino acids with high accuracy.

The Mechanism of Overflow Amplitude in Nanopore Experiments and Its Application in Molecule Detection

The investigation of abnormal experimental phenomena observed in nanopore research improves our understanding of nanopores. In this article, we report and explore the unusual phenomenon that the amplitude of current blockage decreases beyond zero baseline (overflow amplitudes), which was observed in the translocation behavior of 100 bp double-stranded DNA molecules through SiN_x nanopores. In our experiments, the overflow amplitude decreases with the increase of salt concentration and also decreases when the dwell time is shortened as the normalized amplitude of the overflow current showed a reduction with the increase of voltage. Upon analyzing the electric double layer meanwhile, the overflow amplitudes were shown to be positively correlated with the depth of the electric double layer and the duration of interaction between biological molecules. The formation of overflow amplitude can be attributed to the double electric layer ionic perturbation and reconfiguration, which are the results of the interaction between the biomolecule and the electric bilayer. The validation of the assumption using biomolecules containing different charges demonstrated that the overflow amplitude increased with the increase of the charge. It was concluded that proteins that pass through the nanopore with different orientation were differentiated based on their different overflow amplitude patterns. The investigation of overflow amplitude helps to enhance the understanding and the performance of nanopores.

Modifying the pH sensitivity of OmpG nanopore for improved detection at acidic pH

The outer membrane protein G (OmpG) nanopore is a monomeric β-barrel channel consisting of seven flexible extracellular loops. Its most flexible loop, loop 6, can be used to host high-affinity binding ligands for the capture of protein analytes, which induces characteristic current patterns for protein identification. At acidic pH, the ability of OmpG to detect protein analytes is hampered by its tendency toward the closed state, which renders the nanopore unable to reveal current signal changes induced by bound analytes. In this work, critical residues that control the pH-dependent gating of loop 6 were identified, and an OmpG nanopore that can stay predominantly open at a broad range of pHs was created by mutating these pH-sensitive residues. A short single-stranded DNA was chemically tethered to the pH-insensitive OmpG to demonstrate the utility of the OmpG nanopore for sensing complementary DNA and a DNA binding protein at an acidic pH.

Programmable nano-reactors for stochastic sensing

Chemical reactions of single molecules, caused by rapid formation or breaking of chemical bonds, are difficult to observe even with state-of-the-art instruments. A biological nanopore can be engineered into a single molecule reactor, capable of detecting the binding of a monatomic ion or the transient appearance of chemical intermediates. Pore engineering of this type is however technically challenging, which has significantly restricted further development of this technique. We propose a versatile strategy, "programmable nano-reactors for stochastic sensing" (PNRSS), by which a variety of single molecule reactions of hydrogen peroxide, metal ions, ethylene glycol, glycerol, lactic acid, vitamins, catecholamines or nucleoside analogues can be observed directly. PNRSS presents a refined sensing resolution which can be further enhanced by an artificial intelligence algorithm. Remdesivir, a nucleoside analogue and an investigational anti-viral drug used to treat COVID-19, can be distinguished from its active triphosphate form by PNRSS, suggesting applications in pharmacokinetics or drug screening.

Herding cats: Label-based approaches in protein translocation through nanopore sensors for single-molecule protein sequence analysis

Proteins carry out life's essential functions. Comprehensive proteome analysis technologies are thus required for a full understanding of the operating principles of biological systems. While current proteomics techniques suffer from limitations in sensitivity and/or throughput, nanopore technology has the potential to enable de novo protein identification through single-molecule sequencing. However, a significant barrier to achieving this goal is controlling protein/peptide translocation through the nanopore sensor for processive strand analysis. Here, we review recent approaches that use a range of techniques, from oligonucleotide conjugation to molecular motors, aimed at driving protein strands and peptides through protein nanopores. We further discuss site-specific protein conjugation chemistry that could be combined with these translocation approaches as future directions to achieve single-molecule protein detection and sequencing of native proteins.

Unveiling the Microscopic Mechanism of Current Variation in the Sensing Region of the MspA Nanopore for DNA Sequencing

Different nucleotides generate specific ionic currents that discriminate between the nucleotides while they are passing through the nanopore constriction. MspA is a commonly used nanopore for DNA sequencing. However, the reasons of the current variation remain ambiguous. Our work unveils the microscopic mechanism of current variation for an ssDNA passing through the MspA nanopore by all-atom molecular dynamic simulations. Besides the physical rigidity and dimensions of the nucleotides, nucleotide orientation is observed to induce nonignorable current variation. Besides the generally considered MspA nanopore constriction, it is also found that the region below constriction could be used to detect and differentiate single nucleotides when the single-stranded DNA translocates in the form of base-constriction-base meshing and ratcheting across the nanopore constriction compared to other regions. The work provides a novel insight into facilitating the development of low-cost and high-throughput nanopore DNA sequencing.

Stable polymer bilayers for protein channel recordings at high guanidinium chloride concentrations

The use of chaotropic reagents is common in biophysical characterization of biomolecules. When the study involves transmembrane protein channels, the stability of the protein channel and supporting bilayer membrane must be considered. In this letter, we show that planar bilayers composed of poly(1,2-butadiene)-b-poly(ethylene oxide) diblock copolymer are stable and leak-free at high guanidinium chloride concentrations, in contrast to diphytanoyl phosphatidylcholine bilayers, which exhibit deleterious leakage under similar conditions. Furthermore, insertion and functional analysis of channels such as α-hemolysin and MspA are straightforward in these polymer membranes. Finally, we demonstrate that α-hemolysin channels maintain their structural integrity at 2 M guanidinium chloride concentrations using blunt DNA hairpins as molecular reporters.

Pore-forming toxins as tools for polymer analytics: From sizing to sequencing

We report here on the nanopore resistive pulse sensing (Np-RPS) method, involving pore-forming toxins as tools for polymer analytics at single molecule level. Np-RPS is an electrical method for the label-free detection of single molecules. A molecule interacting with the pore causes a change of the electrical resistance of the pore, called a resistive pulse, associated with a measurable transient current blockade. The features of the blockades, in particular their depth and duration, contain information on the molecular properties of the analyte. We first revisit the history of Np-RPS, then we discuss the effect of the configuration of the molecule/nanopore interaction on the molecular information that can be extracted from the signal, illustrated in two different regimes that either favor molecular sequencing or molecular sizing. Specifically, we focus on the sizing regime and on the use of two different pore-forming toxins, staphylococcal α-hemolysin (αHL) and aerolysin (AeL) nanopores, for the characterization of water-soluble polymers (poly-(ethylene glycol), (PEG)), homopeptides, and heteropeptides. We discuss how nanopore sizing of polymers could be envisioned as a new approach for peptide/protein sequencing.

Lysenin Channels as Sensors for Ions and Molecules

Lysenin is a pore-forming protein extracted from the earthworm Eisenia fetida, which inserts large conductance pores in artificial and natural lipid membranes containing sphingomyelin. Its cytolytic and hemolytic activity is rather indicative of a pore-forming toxin; however, lysenin channels present intricate regulatory features manifested as a reduction in conductance upon exposure to multivalent ions. Lysenin pores also present a large unobstructed channel, which enables the translocation of analytes, such as short DNA and peptide molecules, driven by electrochemical gradients. These important features of lysenin channels provide opportunities for using them as sensors for a large variety of applications. In this respect, this literature review is focused on investigations aimed at the potential use of lysenin channels as analytical tools. The described explorations include interactions with multivalent inorganic and organic cations, analyses on the reversibility of such interactions, insights into the regulation mechanisms of lysenin channels, interactions with purines, stochastic sensing of peptides and DNA molecules, and evidence of molecular translocation. Lysenin channels present themselves as versatile sensing platforms that exploit either intrinsic regulatory features or the changes in ionic currents elicited when molecules thread the conducting pathway, which may be further developed into analytical tools of high specificity and sensitivity or exploited for other scientific biotechnological applications.

Nanopore detection of metal ions: Current status and future directions

In this review, we highlight recent research efforts that aimed at developing nanopore sensors for detection of metal ions, which play a crucial role in environmental safety and human health. Protein pores use three stochastic sensing-based strategies for metal ion detection. The first strategy is to construct engineered nanopores with metal ion binding sites, so that the interaction between the target analytes and the nanopore can slow the movement of metal ions in the nano-channel. Second, large molecules such as nucleic acids and especially peptides could be utilized as external selective molecular probes to detect metal ions based on the conformational change of the ligand molecules induced by the metal ion-ligand chelation / coordination interaction. Third, enzymatic reactions can also be used as an alternative to the molecule probe strategy in the situation that a sensitive and selective probe molecule for the target analyte is difficult to obtain. On the other hand, by taking advantage of steady-state analysis, synthetic nanopores mainly use two strategies (modification and modification-free) to detect metals. Given the advantages of high sensitivity & selectivity, and label-free detection, nanopore-based metal ion sensors should find useful application in many fields, including environmental monitoring, medical diagnosis, and so on.

Chemically tailoring nanopores for single-molecule sensing and glycomics

A nanopore can be fairly-but uncharitably-described as simply a nanofluidic channel through a thin membrane. Even this simple structural description holds utility and underpins a range of applications. Yet significant excitement for nanopore science is more readily ignited by the role of nanopores as enabling tools for biomedical science. Nanopore techniques offer single-molecule sensing without the need for chemical labelling, since in most nanopore implementations, matter is its own label through its size, charge, and chemical functionality. Nanopores have achieved considerable prominence for single-molecule DNA sequencing. The predominance of this application, though, can overshadow their established use for nanoparticle characterization and burgeoning use for protein analysis, among other application areas. Analyte scope continues to be expanded, and with increasing analyte complexity, success will increasingly hinge on control over nanopore surface chemistry to tune the nanopore, itself, and to moderate analyte transport. Carbohydrates are emerging as the latest high-profile target of nanopore science. Their tremendous chemical and structural complexity means that they challenge conventional chemical analysis methods and thus present a compelling target for unique nanopore characterization capabilities. Furthermore, they offer molecular diversity for probing nanopore operation and sensing mechanisms. This article thus focuses on two roles of chemistry in nanopore science: its use to provide exquisite control over nanopore performance, and how analyte properties can place stringent demands on nanopore chemistry. Expanding the horizons of nanopore science requires increasing consideration of the role of chemistry and increasing sophistication in the realm of chemical control over this nanoscale milieu.

Electro-Osmotic Vortices Promote the Capture of Folded Proteins by PlyAB Nanopores

Biological nanopores are emerging as powerful tools for single-molecule analysis and sequencing. Here, we engineered the two-component pleurotolysin (PlyAB) toxin to assemble into 7.2 × 10.5 nm cylindrical nanopores with a low level of electrical noise in lipid bilayers, and we addressed the nanofluidic properties of the nanopore by continuum simulations. Surprisingly, proteins such as human albumin (66.5 kDa) and human transferrin (76-81 kDa) did not enter the nanopore. We found that the precise engineering of the inner surface charge of the PlyAB induced electro-osmotic vortices that allowed the electrophoretic capture of the proteins. Once inside the nanopore, two human plasma proteins could be distinguished by the characteristics of their current blockades. This fundamental understanding of the nanofluidic properties of nanopores provides a practical method to promote the capture and analysis of folded proteins by nanopores.

Application of Solid-State Nanopore in Protein Detection

A protein is a kind of major biomacromolecule of life. Its sequence, structure, and content in organisms contains quite important information for normal or pathological physiological process. However, research of proteomics is facing certain obstacles. Only a few technologies are available for protein analysis, and their application is limited by chemical modification or the need for a large amount of sample. Solid-state nanopore overcomes some shortcomings of the existing technology, and has the ability to detect proteins at a single-molecule level, with its high sensitivity and robustness of device. Many works on detection of protein molecules and discriminating structure have been carried out in recent years. Single-molecule protein sequencing techniques based on solid-state nanopore are also been proposed and developed. Here, we categorize and describe these efforts and progress, as well as discuss their advantages and drawbacks.

Improved Measurement of Proteins Using a Solid-State Nanopore Coupled with a Hydrogel

Although resistive pulse sensing using solid-state nanopores is capable of single-molecule sensitivity, previous work has shown that nanoparticles, such as proteins, pass through nanopores too quickly for accurate detection with typical measurement apparatus. As a result, nanopore measurements of these particles significantly deviate from theoretically estimated current amplitudes and detection rates. Here, we show that a hydrogel placed on the distal side of a nanopore can increase the residence time of nanoparticles within the nanopore, significantly increasing the detection rate and allowing improved resolution of blockage currents. The method is simple and inexpensive to implement while being label-free and applicable to a wide range of nanoparticle targets. Using hydrogel-backed nanopores, we detected the protein IgG with event frequencies several orders of magnitude higher than those in the absence of the hydrogel and with larger measured currents that agree well with theoretical models. We also show that the improved measurement also enables discrimination of IgG and bovine serum albumin in a mixed solution. Finally, we show that measurements of IgG with the hydrogel-backed nanopores can also yield current amplitude distributions that can be analyzed to infer its approximate shape.

The applications of nanopores in studies of proteins

Nanopores are a label-free platform with the ability to detect subtle changes in the activities of individual biomolecules under physiological conditions. Here, we comprehensively review the technological development of nanopores, focusing on their applications in studying the physicochemical properties and dynamic conformations of peptides, individual proteins, protein-protein complexes and protein-DNA complexes. This is followed by a brief discussion of the potential challenges that need to be overcome before the technology can be widely accepted by the scientific community. We believe that with continued refinement of the technology, significant understanding can be gained to help clarify the role of protein activities in the regulation of cellular physiology and pathogenesis.

A comparison of ion channel current blockades caused by individual poly(ethylene glycol) molecules and polyoxometalate nanoclusters

Proteinaceous nanometer-scale pores have been used to detect and physically characterize many different types of analytes at the single-molecule limit. The method is based on the ability to measure the transient reduction in the ionic channel conductance caused by molecules that partition into the pore. The distribution of blockade depth amplitudes and residence times of the analytes in the pore are used to physically and chemically characterize them. Here we compare the current blockade events caused by flexible linear polymers of ethylene glycol (PEGs) and structurally well-defined tungsten polyoxymetallate nanoparticles in the nanopores formed by Staphylococcus aureusα-hemolysin and Aeromonas hydrophila aerolysin. Surprisingly, the variance in the ionic current blockade depth values for the relatively rigid metallic nanoparticles is much greater than that for the flexible PEGs, possibly because of multiple charged states of the polyoxymetallate clusters.

Discrimination of Protein Amino Acid or Its Protonated State at Single-Residue Resolution by Graphene Nanopores

The function of a protein is determined by the composition of amino acids and is essential to proteomics. However, protein sequencing remains challenging due to the protein's irregular charge state and its high-order structure. Here, a proof of principle study on the capability of protein sequencing by graphene nanopores integrated with atomic force microscopy is performed using molecular dynamics simulations. It is found that nanopores can discriminate a protein sequence and even its protonation state at single-residue resolution. Both the pulling forces and current blockades induced by the permeation of protein residues are found to be highly correlated with the type of amino acids, which makes the residues identifiable. It is also found that aside from the dimension, both the conformation and charge state of the residue can significantly influence the force and current signal during its permeation through the nanopore. In particular, due to the electro-osmotic flow effect, the blockade current for the double-protonated histidine is slightly smaller than that for single-protonated histidine, which makes it possible for discrimination of different protonation states of amino acids. The results reported here present a novel protein sequencing scheme using graphene nanopores combined with nanomanipulation technology.

Aerolysin, a Powerful Protein Sensor for Fundamental Studies and Development of Upcoming Applications

The nanopore electrical approach is a breakthrough in single molecular level detection of particles as small as ions, and complex as biomolecules. This technique can be used for molecule analysis and characterization as well as for the understanding of confined medium dynamics in chemical or biological reactions. Altogether, the information obtained from these kinds of experiments will allow us to address challenges in a variety of biological fields. The sensing, design, and manufacture of nanopores is crucial to realize these objectives. For some time now, aerolysin, a pore forming toxin, and its mutants have shown high potential in real time analytical chemistry, size discrimination of neutral polymers, oligosaccharides, oligonucleotides and peptides at monomeric resolution, sequence identification, chemical modification on DNA, potential biomarkers detection, and protein folding analysis. This review focuses on the results obtained with aerolysin nanopores on the fields of chemistry, biology, physics, and biotechnology. We discuss and compare as well the results obtained with other protein channel sensors.

Differentiation of selectively labeled peptides using solid-state nanopores

Determination of the amino acid sequence of a protein is critical for understanding various biological processes. Mass spectrometry has mainly been used for protein identification; however, there are limitations to its sensitivity when detecting low abundance proteins. In this study, we attempted to distinguish between three similar peptide sequences (∼40 amino acids, ∼5 kDa) that differed only by the location or number of cysteine residues with solid-state nanopores. The cysteine residues are located at one end, one at the center, and at both ends for each of the three peptides. We found that differentiation of the three types of peptides by nanopore signals was difficult. However, when the cysteine residue was labeled with a negatively charged molecule, Flamma® 496, the labeled peptides showed distinct signals for each peptide. Comparing the relative current blockades of labeled peptides with applied voltages, we found that the label was able to change peptide conformations and the resulting ionic current signals from the three labeled peptides were distinguished based on the relative current blockade, full width at half-maximum of the current blockade distribution, and single-molecule level peak shape analysis. Our results suggest that solid-state nanopores combined with a targeted labeling strategy could be used to obtain characteristic peptide signatures that could ultimately be used for protein identification.

A lithium-ion-active aerolysin nanopore for effectively trapping long single-stranded DNA

Wild-type aerolysin (AeL) nanopores allow direct single nucleotide discrimination of very short oligonucleotides (≤10 nt) without labelling, which shows great potential for DNA sensing. To achieve real applications, one major obstacle of AeL is its poor capture ability of long single-stranded DNA (ssDNA, >10 nt). Here, we have proposed a novel and robust strategy for the electrostatic focusing of long ssDNA into a lithium-chloride (LiCl)-active AeL. By using this method, for the first time we have demonstrated AeL detection of ssDNA longer than 100 nt. Due to screening more negative charges, LiCl improves AeL capture ability of long ssDNA (i.e. 60 nt) by 2.63- to 10.23-fold compared to KCl. Further calculations and molecular dynamics simulations revealed that strong binding between Li+ and the negatively charged residue neutralized the AeL, leading to a reduction in the energy barrier for ssDNA capture. These findings facilitate the future high-throughput applications of AeL in genetic and epigenetic diagnostics.

Nanopore-Based Confined Spaces for Single-Molecular Analysis

The field of nanopore sensing at the single-molecular level is in a "boom" period. Such nanopores, which are either composed of biological materials or are fabricated from solid-state substrates, offer a unique confined space that is compatible with the single-molecular scale. Under the influence of an electrical field, such single-biomolecular interfaces can read single-molecular information and, if appropriately fine-tuned, each molecule plays its individual ionic rhythm to compose a "molecular symphony". Over the past few decades, many research groups have worked on nanopore-based single-molecular sensors for a range of thrilling chemical and clinical applications. Furthermore, for the past decade, we have also focused on nanopore-based sensors. In this Minireview, we summarize the recent developments in fundamental research and applications in this area, along with data algorithms and advances in hardware, which act as infrastructure for the electrochemical analysis.

Thermostable virus portal proteins as reprogrammable adapters for solid-state nanopore sensors

Nanopore-based sensors are advancing the sensitivity and selectivity of single-molecule detection in molecular medicine and biotechnology. Current electrical sensing devices are based on either membrane protein pores supported in planar lipid bilayers or solid-state (SS) pores fabricated in thin metallic membranes. While both types of nanosensors have been used in a variety of applications, each has inherent disadvantages that limit its use. Hybrid nanopores, consisting of a protein pore supported within a SS membrane, combine the robust nature of SS membranes with the precise and simple engineering of protein nanopores. We demonstrate here a novel lipid-free hybrid nanopore comprising a natural DNA pore from a thermostable virus, electrokinetically inserted into a larger nanopore supported in a silicon nitride membrane. The hybrid pore is stable and easy to fabricate, and, most importantly, exhibits low peripheral leakage allowing sensing and discrimination among different types of biomolecules.

Paving the way to single-molecule protein sequencing

Proteins are major building blocks of life. The protein content of a cell and an organism provides key information for the understanding of biological processes and disease. Despite the importance of protein analysis, only a handful of techniques are available to determine protein sequences, and these methods face limitations, for example, requiring a sizable amount of sample. Single-molecule techniques would revolutionize proteomics research, providing ultimate sensitivity for the detection of low-abundance proteins and the realization of single-cell proteomics. In recent years, novel single-molecule protein sequencing schemes that use fluorescence, tunnelling currents and nanopores have been proposed. Here, we present a review of these approaches, together with the first experimental efforts towards their realization. We discuss their advantages and drawbacks, and present our perspective on the development of single-molecule protein sequencing techniques.

The Utility of Nanopore Technology for Protein and Peptide Sensing

Resistive pulse nanopore sensing enables label-free single-molecule analysis of a wide range of analytes. An increasing number of studies have demonstrated the feasibility and usefulness of nanopore sensing for protein and peptide characterization. Nanopores offer the potential to study a variety of protein-related phenomena that includes unfolding kinetics, differences in unfolding pathways, protein structure stability, and free-energy profiles of DNA-protein and RNA-protein binding. In addition to providing a tool for fundamental protein characterization, nanopores have also been used as highly selective protein detectors in various solution mixtures and conditions. This review highlights these and other developments in the area of nanopore-based protein and peptide detection.

Versatile cyclodextrin nanotube synthesis with functional anchors for efficient ion channel formation: design, characterization and ion conductance

Biomimetic ion channels with different materials have been extensively designed to study the dynamics in a confined medium. These channels allow the development of several applications, such as ultra-fast sequencing and biomarker detection. When considering their synthesis, the use of cheap, non-cytotoxic and readily available materials is an increasing priority. Cyclodextrins, in supramolecular architectures, are widely utilized for pharmaceutical and biotechnological applications. Recent work has shown that short nanotubes (NTs) based on alpha-cyclodextrin (α-CD) assemble transient ion channels into membranes without cytotoxicity. In this study, we probe the influence of new cyclodextrin NT structural parameters and chemical modifications on channel formation, stability and electrical conductance. We report the successful synthesis of β- and γ-cyclodextrin nanotubes (β-CDNTs and γ-CDNTs), as evidenced by mass-spectrometry and high-resolution transmission electron microscopy. CDNTs were characterized by their length, diameter and number of CDs. Two hydrophobic groups, silylated or vinylated, were attached along the γ-CDNTs, improving the insertion time into the membrane. All NTs synthesized form spontaneous biomimetic ion channels. The hydrophobic NTs exhibit higher stability in membranes. Electrophysiological measurements show that ion transport is the main contribution of NT conductance and that the ion energy penalty for the entry into these NTs is similar to that of biological channels.

The aerolysin nanopore: from peptidomic to genomic applications

The aerolysin pore (ARP) is a newly emerging nanopore that has been extensively used for peptide and protein sensing. Recently, several groups have explored the application of ARP in detecting genetic and epigenetic markers. This brief review summarizes the current applications of ARP, progressing from peptidomic to genomic detection; the recently reported site-directed mutagenesis of ARP; and new genomic DNA sensing approaches, and their advantages and disadvantages. This review will also discuss the perspectives and future applications of ARP for nucleic acid sequencing and biomolecule sensing.

Dynamics of a polyelectrolyte through aerolysin channel as a function of applied voltage and concentration⋆

We describe the behaviour of a polyelectrolyte in confined geometry. The transport of a polyelectrolyte, dextran sulfate, through a recombinant protein channel, aerolysin, inserted into a planar lipid bilayer is studied as a function of applied voltage and polyelectrolyte concentration and chain length. The aerolysin pore has a weak geometry asymmetry, a high number of charged residues and the polyelectrolyte is strongly negatively charged. The resulting current blockades were characterized by short and long dwelling times. Their frequency varies exponentially as a function of applied voltage and linearly as a function of polyelectrolyte concentration. The long blockade duration decreases exponentially when the electrical force increases. The ratio of the population of short events to the one of long events decreases when the applied voltage increases and displays an exponential variation. The long residence time increases with the polyelectrolyte chain length. We measure a reduction of the effective charge of the polyelectrolyte at the pore entry and inside the channel. For a fixed applied voltage, + / - 100 mV, at both sides of the protein pore entrance, the events frequency is similar as a function of dextran sulfate concentration. The mean blockade durations are independent of polyelectrolyte concentration and are similar for both entrances of the pore and remain constant as a function of the electrical force.

Reversible Immobilization of Proteins in Sensors and Solid-State Nanopores

The controlled functionalization of surfaces with proteins is crucial for many analytical methods in life science research and biomedical applications. Here, a coating for silica-based surfaces is established which enables stable and selective immobilization of proteins with controlled orientation and tunable surface density. The coating is reusable, retains functionality upon long-term storage in air, and is applicable to surfaces of complex geometry. The protein anchoring method is validated on planar surfaces, and then a method is developed to measure the anchoring process in real time using silicon nitride solid-state nanopores. For surface attachment, polyhistidine tags that are site specifically introduced into recombinant proteins are exploited, and the yeast nucleoporin Nsp1 is used as model protein. Contrary to the commonly used covalent thiol chemistry, the anchoring of proteins via polyhistidine tag is reversible, permitting to take proteins off and replace them by other ones. Such switching in real time in experiments on individual nanopores is monitored using ion conductivity. Finally, it is demonstrated that silica and gold surfaces can be orthogonally functionalized to accommodate polyhistidine-tagged proteins on silica but prevent protein binding to gold, which extends the applicability of this surface functionalization method to even more complex sensor devices.

Rationally Designed Sensing Selectivity and Sensitivity of an Aerolysin Nanopore via Site-Directed Mutagenesis

Selectivity and sensitivity are two key parameters utilized to describe the performance of a sensor. In order to investigate selectivity and sensitivity of the aerolysin nanosensor, we manipulated its surface charge at different locations via single site-directed mutagenesis. To study the selectivity, we replaced the positively charged R220 at the entrance of the pore with negatively charged glutamic acid, resulting in barely no current blockages for sensing negatively charged oligonucleotides. For the sensitivity, we substituted the positively charged lumen-exposed amino acid K238 located at trans-ward third of the β-barrel stem with glutamic acid. This leads to a surprisingly longer duration time at +140 mV, which is about 20 times slower in translocation speed for Poly(dA)₄ compared to that of wild-type aerolysin, indicating the stronger pore-analyte interactions and enhanced sensitivity. Therefore, it is both feasible and understandable to rationally design confined biological nanosensors for single molecule detection with high selectivity and sensitivity.

Computation-Assisted Nanopore Detection of Thorium Ions

Thorium is a well-known radioactive and chemically toxic contaminant in the environment. The continuous exposure to thorium may cause an increased risk of developing lung and liver diseases as well as lung, pancreas, and bone cancer. Due to its use in nuclear industry and other industrial applications, thorium may be accidentally released to the environment from its mining and processing plants. In this work, we developed a rapid, real-time, and label-free nanopore sensor for Th⁴⁺ detection by using an aspartic acid containing peptide as a chelating agent and tuning the electrolyte solution pH to control the net charges of the peptide ligand and its metal ion complex. The method is highly sensitive with a detection limit of 0.45 nM. Furthermore, the sensor is selective: other metal ions (e.g., UO₂²⁺, Pb²⁺, Cu²⁺, Ni²⁺, Hg²⁺, Zn²⁺, As³⁺, Mg²⁺, and Ca²⁺) with concentrations of up to 3 orders of magnitude greater than that of Th⁴⁺ would not interfere with Th⁴⁺detection. In addition, simulated water samples were successfully analyzed. Our developed computation-assisted sensing strategy should find useful applications in the development of nanopore sensors for other metal ions.

Real-Time and Accurate Identification of Single Oligonucleotide Photoisomers via an Aerolysin Nanopore

Identification of the configuration for the photoresponsive oligonucleotide plays an important role in the ingenious design of DNA nanomolecules and nanodevices. Due to the limited resolution and sensitivity of present methods, it remains a challenge to determine the accurate configuration of photoresponsive oligonucleotides, much less a precise description of their photoconversion process. Here, we used an aerolysin (AeL) nanopore-based confined space for real-time determination and quantification of the absolute cis/ trans configuration of each azobenzene-modified oligonucleotide (Azo-ODN) with a single molecule resolution. The two completely separated current distributions with narrow peak widths at half height (<0.62 pA) are assigned to cis/ trans-Azo-ODN isomers, respectively. Due to the high current sensitivity, each isomer of Azo-ODN could be undoubtedly identified, which gives the accurate photostationary conversion values of 82.7% for trans-to- cis under UV irradiation and 82.5% for cis-to- trans under vis irradiation. Further real-time kinetic evaluation reveals that the photoresponsive rate constants of Azo-ODN from trans-to- cis and cis-to -trans are 0.43 and 0.20 min^-1, respectively. This study will promote the sophisticated design of photoresponsive ODN to achieve an efficient and applicable photocontrollable process.

Identification of single amino acid differences in uniformly charged homopolymeric peptides with aerolysin nanopore

There are still unmet needs in finding new technologies for biomedical diagnostic and industrial applications. A technology allowing the analysis of size and sequence of short peptide molecules of only few molecular copies is still challenging. The fast, low-cost and label-free single-molecule nanopore technology could be an alternative for addressing these critical issues. Here, we demonstrate that the wild-type aerolysin nanopore enables the size-discrimination of several short uniformly charged homopeptides, mixed in solution, with a single amino acid resolution. Our system is very sensitive, allowing detecting and characterizing a few dozens of peptide impurities in a high purity commercial peptide sample, while conventional analysis techniques fail to do so.

Biomimetic ion channels formation by emulsion based on chemically modified cyclodextrin nanotubes

We present short cyclodextrin nanotubes that form ion channels in lipid bilayers.

Porphyrin-Assisted Docking of a Thermophage Portal Protein into Lipid Bilayers: Nanopore Engineering and Characterization

Nanopore-based sensors for nucleic acid sequencing and single-molecule detection typically employ pore-forming membrane proteins with hydrophobic external surfaces, suitable for insertion into a lipid bilayer. In contrast, hydrophilic pore-containing molecules, such as DNA origami, have been shown to require chemical modification to favor insertion into a lipid environment. In this work, we describe a strategy for inserting polar proteins with an inner pore into lipid membranes, focusing here on a circular 12-subunit assembly of the thermophage G20c portal protein. X-ray crystallography, electron microscopy, molecular dynamics, and thermal/chaotrope denaturation experiments all find the G20c portal protein to have a highly stable structure, favorable for nanopore sensing applications. Porphyrin conjugation to a cysteine mutant in the protein facilitates the protein's insertion into lipid bilayers, allowing us to probe ion transport through the pore. Finally, we probed the portal interior size and shape using a series of cyclodextrins of varying sizes, revealing asymmetric transport that possibly originates from the portal's DNA-ratchet function.

Remote Activation of a Nanopore for High-Performance Genetic Detection Using a pH Taxis-Mimicking Mechanism

Aerolysin protein pore has been widely used for sensing peptides and proteins. However, only a few groups explored this nanopore for nucleic acids detection. The challenge is the extremely low capture efficiency for nucleic acids (>10 bases), which severely lowers the sensitivity of an aerolysin-based genetic biosensor. Here we reported a simple and easy-to-operate approach to noncovalently transform aerolysin into a highly nucleic acids-sensitive nanopore. Through a remote pH-modulation mechanism, we simply lower the pH on one side of the pore, then aerolysin is immediately "activated" and enabled to capture target DNA/RNA efficiently from the opposite side of the pore. This mechanism also decelerates DNA translocation, a desired property for sequencing and gene detection, allowing temporal separation of DNAs in different lengths. This method provides insight into the nanopore engineering for biosensing, making aerolysin applicable in genetic and epigenetic detections of long nucleic acids.

Cell-free production of pore forming toxins: Functional analysis of thermostable direct hemolysin from Vibrio parahaemolyticus

The pore forming characteristic of TDH1 and TDH2 variants of thermostable direct hemolysin (TDH), a major toxin involved in the pathogenesis of Vibrio parahaemolyticus, was studied on a planar lipid bilayer painted over individual picoliter cavities containing microelectrodes assembled in a multiarray. Both proteins formed pores upon insertion into the lipid bilayer which was shown as a shift in the conductance from the baseline current. TDH2 protein was able to produce stable currents and the currents were influenced by external factors like concentration, type of salt and voltage. The pore currents were influenced and showed a detectable response in the presence of polymers which makes them suitable for biotechnology applications.

Solute particle near a nanopore: influence of size and surface properties on the solvent-mediated forces

Nanoscopic pores are used in various systems to attract nanoparticles. In general the behaviour is a result of two types of interactions: the material specific affinity and the solvent-mediated influence also called the depletion force. The latter is more universal but also much more complex to understand since it requires modeling both the nanoparticle and the solvent. Here, we employed classical density functional theory to determine the forces acting on a nanoparticle near a nanoscopic pore as a function of its hydrophobicity and its size. A simple capillary model is constructed to predict those depletion forces for various surface properties. For a nanoscopic pore, complexity arises from both the specific geometry and the fact that hydrophobic pores are not necessarily filled with liquid. Taking all of these effects into account and including electrostatic effects, we establish a phase diagram describing the entrance and the rejection of the nanoparticle from the pore.

Construction of an aerolysin nanopore in a lipid bilayer for single-oligonucleotide analysis

Nanopore techniques offer the possibility to study biomolecules at the single-molecule level in a low-cost, label-free and high-throughput manner. By analyzing the level, duration and frequency of ionic current blockades, information regarding the structural conformation, mass, length and concentration of single molecules can be obtained in physiological conditions. Aerolysin monomers assemble into small pores that provide a confined space for effective electrochemical control of a single molecule interacting with the pore, which significantly improves the temporal resolution of this technique. In comparison with other reported protein nanopores, aerolysin maintains its functional stability in a wide range of pH conditions, which allows for the direct discrimination of oligonucleotides between 2 and 10 nt in length and the monitoring of the stepwise cleavage of oligonucleotides by exonuclease I (Exo I) in real time. This protocol describes the process of activating proaerolysin using immobilized trypsin to obtain the aerolysin monomer, the construction of a lipid membrane and the insertion of an individual aerolysin nanopore into this membrane. A step-by-step description is provided of how to perform single-oligonucleotide analyses and how to process the acquired data. The total time required for this protocol is ∼3 d.

Nanopore Sensing of Protein Folding

Single-molecule studies of protein folding hold keys to unveiling protein folding pathways and elusive intermediate folding states-attractive pharmaceutical targets. Although conventional single-molecule approaches can detect folding intermediates, they presently lack throughput and require elaborate labeling. Here, we theoretically show that measurements of ionic current through a nanopore containing a protein can report on the protein's folding state. Our all-atom molecular dynamics (MD) simulations show that the unfolding of a protein lowers the nanopore ionic current, an effect that originates from the reduction of ion mobility in proximity to a protein. Using a theoretical model, we show that the average change in ionic current produced by a folding-unfolding transition is detectable despite the orientational and conformational heterogeneity of the folded and unfolded states. By analyzing millisecond-long all-atom MD simulations of multiple protein transitions, we show that a nanopore ionic current recording can detect folding-unfolding transitions in real time and report on the structure of folding intermediates.

Peptide translocation across MOMP, the major outer membrane channel from Campylobacter jejuni

Here we report on translocation of short poly-arginines across the MOMP porin, the major outer membrane protein in the cell wall of Campylobacter jejuni. MOMP was purified to homogeneity from a pathogenic strain of C. jejuni. Its reconstitution in lipid membranes and measuring the ion-current revealed two main distinct populations of protein channels which we interpreted as mono and trimers. Addition of poly-arginines causes concentration and voltage dependent ion-current fluctuations. Increasing the transmembrane potential decreases the residence time of the peptide inside the channel indicating successful translocation. We conclude that poly-arginines can cross the outer membrane of Campylobacter through the MOMP channel.

•

Translocation of short poly-arginines across the MOMP channel has been determined.

•

Penta-arginine and Hepta-arginine translocate across the MOMP channel.

•

Voltage dependent kinetics to distinguish binding from translocation.

Peptide-Mediated Nanopore Detection of Uranyl Ions in Aqueous Media

Uranium is one of the most common radioactive contaminants in the environment. As a major nuclear material in production, environmental samples (like soil and groundwater) can provide signatures on uranium production activity inside the facility. Thus, developing a new and portable analytical technology for uranium in aqueous media is significant not only for environmental monitoring, but also for nonproliferation. In this work, a label-free method for the detection of uranyl (UO₂²⁺) ions is developed by monitoring the translocation of a peptide probe in a nanopore. Based on the difference in the number of peptide events in the absence and presence of uranyl ions, nanomolar concentration of UO₂²⁺ ions could be detected in minutes. The method is highly selective; micromolar concentrations of Cd²⁺, Cu²⁺, Zn²⁺, Ni²⁺, Pb²⁺, Hg²⁺, Th⁴⁺, Mg²⁺, and Ca²⁺ would not interfere with the detection of UO₂²⁺ ions. In addition, simulated water samples were successfully analyzed.

Stochastic sensing of Angiotensin II with lysenin channels

The ability of pore-forming proteins to interact with various analytes has found vast applicability in single molecule sensing and characterization. In spite of their abundance in organisms from all kingdoms of life, only a few pore-forming proteins have been successfully reconstituted in artificial membrane systems for sensing purposes. Lysenin, a pore-forming toxin extracted from the earthworm E. fetida, inserts large conductance nanopores in lipid membranes containing sphingomyelin. Here we show that single lysenin channels may function as stochastic nanosensors by allowing the short cationic peptide angiotensin II to be electrophoretically driven through the conducting pathway. Long-term translocation experiments performed using large populations of lysenin channels allowed unequivocal identification of the unmodified analyte by Liquid Chromatography-Mass Spectrometry. However, application of reverse voltages or irreversible blockage of the macroscopic conductance of lysenin channels by chitosan addition prevented analyte translocation. This investigation demonstrates that lysenin channels have the potential to function as nano-sensing devices capable of single peptide molecule identification and characterization, which may be further extended to other macromolecular analytes.