Synchronized optical and electronic detection of biomolecules using a low noise nanopore platform

Precision Basecalling of Single DNA Nucleotide from Overlapped Transmission Readouts with Machine Learning Aided Solid-State Nanogap

DNA sequencing with the quantum tunneling technique heralds a paradigm shift in genetic analysis, promising rapid and accurate identification for diverging applications ranging from personalized medicine to security issues. However, the widespread distribution of molecular conductance, conduction orbital alignment for resonant transport, and decoding crisscrossing conductance signals of isomorphic nucleotides have been persistent experimental hurdles for swift and precise identification. Herein, we have reported a machine learning (ML)-driven quantum tunneling study with solid-state model nanogap to determine nucleotides at single-base resolution. The optimized ML basecaller has demonstrated a high predictive basecalling accuracy of all four nucleotides from seven distinct data pools, each containing complex transmission readouts of their different dynamic conformations. ML classification of quaternary, ternary, and binary nucleotide combinations is also performed with high precision, sensitivity, and F1 score. ML explainability unravels the evidence of how extracted normalized features within overlapped nucleotide signals contribute to classification improvement. Moreover, electronic fingerprints, conductance sensitivity, and current readout analysis of nucleotides have promised practical applicability with significant sensitivity and distinguishability. Through this ML approach, our study pushes the boundaries of quantum sequencing by highlighting the effectiveness of single nucleotide basecalling with promising implications for advancing genomics and molecular diagnostics.

Fast Fabrication Nanopores on a PMMA Membrane by a Local High Electric Field Controlled Breakdown

The sensitivity and accuracy of nanopore sensors are severely hindered by the high noise associated with solid-state nanopores. To mitigate this issue, the deposition of organic polymer materials onto silicon nitride (SiNx) membranes has been effective in obtaining low-noise measurements. Nonetheless, the fabrication of nanopores sub-10 nm on thin polymer membranes remains a significant challenge. This work proposes a method for fabricating nanopores on polymethyl methacrylate (PMMA) membrane by the local high electrical field controlled breakdown, exploring the impact of voltage and current on the breakdown of PMMA membranes and discussing the mechanism underlying the breakdown voltage and current during the formation of nanopores. By improving the electric field application method, transient high electric fields that are one-seven times higher than the breakdown electric field can be utilized to fabricate nanopores. A comparative analysis was performed on the current noise levels of nanopores in PMMA-SiNx composite membranes and SiNx nanopores with a 5 nm diameter. The results demonstrated that the fast fabrication of nanopores on PMMA-SiNx membranes exhibited reduced current noise compared to SiNx nanopores. This finding provides evidence supporting the feasibility of utilizing this technology for efficiently fabricating low-noise nanopores on polymer composite membranes.

Label-Free Imaging of DNA Interactions with 2D Materials

Two-dimensional (2D) materials offer potential as substrates for biosensing devices, as their properties can be engineered to tune interactions between the surface and biomolecules. Yet, not many methods can measure these interactions in a liquid environment without introducing labeling agents such as fluorophores. In this work, we harness interferometric scattering (iSCAT) microscopy, a label-free imaging technique, to investigate the interactions of single molecules of long dsDNA with 2D materials. The millisecond temporal resolution of iSCAT allows us to capture the transient interactions and to observe the dynamics of unlabeled DNA binding to a hexagonal boron nitride (hBN) surface in solution for extended periods (including a fraction of 10%, of trajectories lasting longer than 110 ms). Using a focused ion beam technique to engineer defects, we find that DNA binding affinity is enhanced at defects; when exposed to long lanes, DNA binds preferentially at the lane edges. Overall, we demonstrate that iSCAT imaging is a useful tool to study how biomolecules interact with 2D materials, a key component in engineering future biosensors.

Wafer-Scale Fabrication of Uniform, Micrometer-Sized, Triangular Membranes on Sapphire for High-Speed Protein Sensing in a Nanopore

Ultra-low-noise solid-state nanopores are attractive for high-accuracy single-molecule sensing. A conventional silicon platform introduces acute capacitive noise to the system, which seriously limits the recording bandwidth. Recently, we have demonstrated the creation of thin triangular membranes on an insulating crystal sapphire wafer to eliminate the parasitic device capacitance. Uniquely different from the previous triangular etching window designs, here hexagonal windows were explored to produce triangular membranes by aligning to the sapphire crystal within a large tolerance of alignment angles (10-35°). Interestingly, sapphire facet competition serves to suppress the formation of more complex polygons but creates stable triangular membranes with their area insensitive to the facet alignment. Accordingly, a new strategy was successfully established on a 2 in. sapphire wafer to produce chips with an average membrane side length of 4.7 μm, an area of <30 μm² for 81% chips, or estimated calculated membrane capacitance as low as 0.06 pF. We finally demonstrated <4 μs high-speed and high-fidelity low-noise protein detection under 250 kHz high bandwidth.

The application of single molecule nanopore sensing for quantitative analysis

Nanopore-based sensors typically work by monitoring transient pulses in conductance via current-time traces as molecules translocate through the nanopore. The unique property of being able to monitor single molecules gives nanopore sensors the potential as quantitative sensors based on the counting of single molecules. This review provides an overview of the concepts and fabrication of nanopore sensors as well as nanopore sensing with a view toward using nanopore sensors for quantitative analysis. We first introduce the classification of nanopores and highlight their applications in molecular identification with some pioneering studies. The review then shifts focus to recent strategies to extend nanopore sensors to devices that can rapidly and accurately quantify the amount of an analyte of interest. Finally, future prospects are provided and briefly discussed. The aim of this review is to aid in understanding recent advances, challenges, and prospects for nanopore sensors for quantitative analysis.

Comparison Study on Single Nucleotide Transport Phenomena in Carbon Nanotubes

To be considered as a promising candidate for mimicking biological nanochannels, carbon nanotubes (CNTs) have been used to explore the mass transport phenomena in recent years. In this study, the single nucleotide transport phenomena are comparatively studied using individual CNTs with a length of ∼15 μm and diameters ranging from 1.5 to 2.5 nm. In the case of CNTs with a diameter of 1.57-1.98 nm, the current traces of nucleotide transport are independent with the metallicity of CNTs and consist of single peak current pulses, whereas extraordinary stepwise current signals are observed in CNT with a diameter of 2.33 nm. It suggests that there is only one molecule in the nanochannel at a time until the diameter of CNT increases to 2.33 nm. Furthermore, it also demonstrates that the single nucleotides can be identified statistically according to their current pulses, indicating the potential application of CNT-based sensors for nucleotides identification.

Optical Nanopore Sensors for Quantitative Analysis

Nanopore sensors have received significant interest for the detection of clinically important biomarkers with single-molecule resolution. These sensors typically operate by detecting changes in the ionic current through a nanopore due to the translocation of an analyte. Recently, there has been interest in developing optical readout strategies for nanopore sensors for quantitative analysis. This is because they can utilize wide-field microscopy to independently monitor many nanopores within a high-density array. This significantly increases the amount of statistics that can be obtained, thus enabling the analysis of analytes present at ultralow concentrations. Here, we review the use of optical nanopore sensing strategies for quantitative analysis. We discuss optical nanopore sensing assays that have been developed to detect clinically relevant biomarkers, the potential for multiplexing such measurements, and techniques to fabricate high density arrays of nanopores with a view toward the use of these devices for clinical applications.

Single-Molecule Binding Assay Using Nanopores and Dimeric NP Conjugates

The ability to measure biomarkers, both specifically and selectively at the single-molecule level in biological fluids, has the potential to transform the diagnosis, monitoring, and therapeutic intervention of diseases. The use of nanopores has been gaining prominence in this area, not only for sequencing but more recently in screening applications. The selectivity of nanopore sensing can be substantially improved with the use of labels, but substantial challenges remain, especially when trying to differentiate between bound from unbound targets. Here highly sensitive and selective molecular probes made from nanoparticles (NPs) that self-assemble and dimerize upon binding to a biological target are designed. It is shown that both single and paired NPs can be successfully resolved and detected at the single-molecule nanopore sensing and can be used for applications such as antigen/antibody detection and microRNA (miRNA) sequence analysis. It is expected that such technology will contribute significantly to developing highly sensitive and selective strategies for the diagnosis and screening of diseases without the need for sample processing or amplification while requiring minimal sample volume.

Recent advances in integrated solid-state nanopore sensors

The advent of single-molecule probing techniques has revolutionized the biomedical and life science fields and has spurred the development of a new class of labs-on-chip based on powerful biosensors. Nanopores represent one of the most recent and most promising single molecule sensing paradigms that is seeing increased chip-scale integration for improved convenience and performance. Due to their physical structure, nanopores are highly sensitive, require low sample volume, and offer label-free, amplification-free, high-throughput real-time detection and identification of biomolecules. Over the last 25 years, nanopores have been extensively employed to detect a variety of biomolecules with a growing range of applicatons ranging from nucleic acid sequencing to ultrasensitive diagnostics to single-molecule biophysics. Nanopores, in particular those in solid-state membranes, also have the potential for integration with other technologies such as optics, plasmonics, microfluidics, and optofluidics to perform more complex tasks for an ever-expanding demand. A number of breakthrough results using integrated nanopore platforms have already been reported, and more can be expected as nanopores remain the focus of innovative research and are finding their way into commercial instruments. This review provides an overview of different aspects and challenges of nanopore technology with a focus on chip-scale integration of solid-state nanopores for biosensing and bioanalytical applications.

Single-molecule amplification-free multiplexed detection of circulating microRNA cancer biomarkers from serum

MicroRNAs (miRNAs) play essential roles in post-transcriptional gene expression and are also found freely circulating in bodily fluids such as blood. Dysregulated miRNA signatures have been associated with many diseases including cancer, and miRNA profiling from liquid biopsies offers a promising strategy for cancer diagnosis, prognosis and monitoring. Here, we develop size-encoded molecular probes that can be used for simultaneous electro-optical nanopore sensing of miRNAs, allowing for ultrasensitive, sequence-specific and multiplexed detection directly in unprocessed human serum, in sample volumes as small as 0.1 μl. We show that this approach allows for femtomolar sensitivity and single-base mismatch selectivity. We demonstrate the ability to simultaneously monitor miRNAs (miR-141-3p and miR-375-3p) from prostate cancer patients with active disease and in remission. This technology can pave the way for next generation of minimally invasive diagnostic and companion diagnostic tests for cancer.

Nanopore sensing of single-biomolecules: a new procedure to identify protein sequence motifs from molecular dynamics

Solid-state nanopores have emerged as one of the most versatile tools for single-biomolecule detection and characterization. Nanopore sensing is based on the measurement of variations in ionic current as charged biomolecules immersed in an electrolyte translocate through nanometer-sized channels, in response to an external voltage applied across the membrane. The passage of a biomolecule through a pore yields information about its structure and chemical properties, as demonstrated experimentally with sub-microsecond temporal resolution. However, extracting the sequence of a biomolecule without the information about its position remains challenging due to the fact there is a large variability of sensing events recorded. In this paper, we performed microsecond time scale all-atom non-equilibrium Molecular Dynamics (MD) simulations of peptide translocation (motifs of alpha-synuclein, associated with Parkinson's disease) through single-layer MoS2 nanopores. First, we present an analysis based on the current threshold to extract and characterize meaningful sensing events from ionic current time series computed from MD. Second, a mechanism of translocation is established, for which side chains of each amino acid are oriented parallel to the electric field when they are translocating through the pore and perpendicular otherwise. Third, a new procedure based on the permutation entropy (PE) algorithm is detailed to identify protein sequence motifs related to ionic current drop speed. PE is a technique used to quantify the complexity of a given time series and it allows the detection of regular patterns. Here, PE patterns were associated with protein sequence motifs composed of 1, 2 or 3 amino acids. Finally, we demonstrate that this very promising procedure allows the detection of biological mutations and could be tested experimentally, despite the fact that reconstructing the sequence information remains unachievable at this time.

Comparing Current Noise in Biological and Solid-State Nanopores

Nanopores bear great potential as single-molecule tools for bioanalytical sensing and sequencing, due to their exceptional sensing capabilities, high-throughput, and low cost. The detection principle relies on detecting small differences in the ionic current as biomolecules traverse the nanopore. A major bottleneck for the further progress of this technology is the noise that is present in the ionic current recordings, because it limits the signal-to-noise ratio (SNR) and thereby the effective time resolution of the experiment. Here, we review the main types of noise at low and high frequencies and discuss the underlying physics. Moreover, we compare biological and solid-state nanopores in terms of the SNR, the important figure of merit, by measuring translocations of a short ssDNA through a selected set of nanopores under typical experimental conditions. We find that SiNx solid-state nanopores provide the highest SNR, due to the large currents at which they can be operated and the relatively low noise at high frequencies. However, the real game-changer for many applications is a controlled slowdown of the translocation speed, which for MspA was shown to increase the SNR > 160-fold. Finally, we discuss practical approaches for lowering the noise for optimal experimental performance and further development of the nanopore technology.

Transverse Detection of DNA Using a MoS2 Nanopore

Classical nanopore sensing relies on the measurement of the ion current passing through a nanopore. Whenever a molecule electrophoretically translocates through the narrow constriction, it modulates the ion current. Although this approach allows one to measure single molecules, the access resistance limits the spatial resolution. This physical limitation could potentially be overcome by an alternative sensing scheme taking advantage of the current across the membrane material itself. Such an electronic readout would also allow better temporal resolution than the ionic current. In this work, we present the fabrication of an electrically contacted molybdenum disulfide (MoS₂) nanoribbon integrated with a nanopore. DNA molecules are sensed by correlated signals from the ionic current through the nanopore and the transverse current through the nanoribbon. The resulting signal suggests a field-effect sensing scheme where the charge of the molecule is directly sensed by the nanoribbon. We discuss different sensing schemes such as local potential sensing and direct charge sensing. Furthermore, we show that the fabrication of freestanding MoS₂ ribbons with metal contacts is reliable and discuss the challenges that arise in the fabrication and usage of these devices.

Wafer-scale fabrication of fused silica chips for low-noise recording of resistive pulses through nanopores

This paper presents a maskless method to manufacture fused silica chips for low-noise resistive-pulse sensing. The fabrication includes wafer-scale density modification of fused silica with a femtosecond-pulsed laser, low-pressure chemical vapor deposition (LPVCD) of silicon nitride (SiN _x ) and accelerated chemical wet etching of the laser-exposed regions. This procedure leads to a freestanding SiN _x window, which is permanently attached to a fused silica support chip and the resulting chips are robust towards Piranha cleaning at ∼80 °C. After parallel chip manufacturing, we created a single nanopore in each chip by focused helium-ion beam or by controlled breakdown. Compared to silicon chips, the resulting fused silica nanopore chips resulted in a four-fold improvement of both the signal-to-noise ratio and the capture rate for signals from the translocation of IgG₁ proteins at a recording bandwidth of 50 kHz. At a bandwidth of ∼1 MHz, the noise from the fused silica nanopore chips was three- to six-fold reduced compared to silicon chips. In contrast to silicon chips, fused silica chips showed no laser-induced current noise-a significant benefit for experiments that strive to combine nanopore-based electrical and optical measurements.

Single-Molecule Analysis with Solid-State Nanopores

Solid-state nanopores and nanopipettes are an exciting class of single-molecule sensors that has grown enormously over the last two decades. They offer a platform for testing fundamental concepts of stochasticity and transport at the nanoscale, for studying single-molecule biophysics and, increasingly, also for new analytical applications and in biomedical sensing. This review covers some fundamental aspects underpinning sensor operation and transport and, at the same time, it aims to put these into context as an analytical technique. It highlights new and recent developments and discusses some of the challenges lying ahead.

Detection of metal corrosion characteristics in chlorine solution using solid state nanopore

Nanopore structures were originally proposed for detection of biomolecule translocation through nanometer-scale pores that perforate membranes by transient changes in ionic current. In this study, these changes are utilized to detect corrosion of different metals in aqueous chlorine media. The corrosion behaviors of Cu, Al, Ti, and Cr were analyzed by monitoring the changes in ion current resulting from ion concentration variations in solutions due to corrosion of the metals. We observed that the Cu layer passivated by CuO _x was severely corroded when a drastic change of ion current was induced, from 10 to 30 nS to the level of 10⁴ nS, as soon as the bias voltage was applied. In the case of Al passivated by thin AlO _x , the conductance increased from 10-30 to 166 ± 52 nS and became saturated. Highly localized pitting corrosion was observed on the periphery of the nanopore, where the electrical field was most concentrated. Finally, we observed that Ti and Cr passivated by oxide showed long-term stability without corrosion in 1 M KCl in the pH range of 4-11.

Estimation of Shape, Volume, and Dipole Moment of Individual Proteins Freely Transiting a Synthetic Nanopore

This paper demonstrates that high-bandwidth current recordings in combination with low-noise silicon nitride nanopores make it possible to determine the molecular volume, approximate shape, and dipole moment of single native proteins in solution without the need for labeling, tethering, or other chemical modifications of these proteins. The analysis is based on current modulations caused by the translation and rotation of single proteins through a uniform electric field inside of a nanopore. We applied this technique to nine proteins and show that the measured protein parameters agree well with reference values but only if the nanopore walls were coated with a nonstick fluid lipid bilayer. One potential challenge with this approach is that an untethered protein is able to diffuse laterally while transiting a nanopore, which generates increasingly asymmetric disruptions in the electric field as it approaches the nanopore walls. These "off-axis" effects add an additional noise-like element to the electrical recordings, which can be exacerbated by nonspecific interactions with pore walls that are not coated by a fluid lipid bilayer. We performed finite element simulations to quantify the influence of these effects on subsequent analyses. Examining the size, approximate shape, and dipole moment of unperturbed, native proteins in aqueous solution on a single-molecule level in real time while they translocate through a nanopore may enable applications such as identifying or characterizing proteins in a mixture, or monitoring the assembly or disassembly of transient protein complexes based on their shape, volume, or dipole moment.

Small molecule electro-optical binding assay using nanopores

The identification of short nucleic acids and proteins at the single molecule level is a major driving force for the development of novel detection strategies. Nanopore sensing has been gaining in prominence due to its label-free operation and single molecule sensitivity. However, it remains challenging to detect small molecules selectively. Here we propose to combine the electrical sensing modality of a nanopore with fluorescence-based detection. Selectivity is achieved by grafting either molecular beacons, complementary DNA, or proteins to a DNA molecular carrier. We show that the fraction of synchronised events between the electrical and optical channels, can be used to perform single molecule binding assays without the need to directly label the analyte. Such a strategy can be used to detect targets in complex biological fluids such as human serum and urine. Future optimisation of this technology may enable novel assays for quantitative protein detection as well as gene mutation analysis with applications in next-generation clinical sample analysis.

Nanopore detection of small molecules can be improved using molecular carriers, but separating a small analyte from the carrier signal can be challenging. Here the authors address this challenge using simultaneous electrical and optical readout in nanopore sensing to detect small molecules and quantify binding affinities.

Translocation of DNA and protein through a sequentially polymerized polyurea nanopore

Here, we investigated the translocation of biomolecules, such as DNA and protein, through a sequentially polymerized polyurea nanopore, with a thin (<10 nm) polymer membrane of uniform thickness. The polyurea membrane was synthesized by molecular layer deposition using p-phenylenediisocyanate (PDI) and p-phenylenediamine (PDA) as sequential precursors. The membrane exhibited a hydrophobic surface with a highly negative surface charge density (-51 mC m-2 at pH 8). It was particularly noted that the high surface charge density of the membrane resulted in a highly developed electro-osmotic flow which, in turn, strongly influenced the capture probability of biomolecules, depending on the balance between the electro-osmotic and electrophoretic forces. For instance, the capture frequency of negatively charged DNA was demonstrated to be quite low, since these two forces more or less cancelled each other, whereas that of positively charged MDM2 was much higher, since these two forces were additive. We also identified that the mean translocation time of MDM2 through the polyurea nanopore was 26.1 ± 3.7 μs while that of the SiN nanopore was 14.2 ± 2.0 μs, hence suggesting that the enhanced electrostatic interaction between positively charged MDM2 and the negatively charged pore surface affects the translocation speed.

The dynamics of electron beam scattering on metal membranes: nanopore formation in metal membranes using transmission electron microscopy

The dynamics of nanopore formation in metal membranes using the highly focused and high energy electron beams (e-beams) of transmission electron microscopy instruments was investigated. Various metals such as Al, Ti, Cr, Cu, and Au were selected to investigate the effect of the atomic mass of the metal on nanopore drilling, namely, elastic versus inelastic scattering. We demonstrated that the effect of elastic scattering (pore formation by sputtering) decreased as the atomic mass of the metal increased. Furthermore, experimental cross-sections obtained from normalized drilled volume vs. electron dose curves (characteristic contrast curves) matched well the calculated atomic displacement cross-sections determined from elastic scattering data. The sputtering energies of Ti, Cr, and Cu were determined to be approximately 10, 9, and 7 eV, respectively, which were in good agreement with the reported range of sputtering energy values.

Recent Progress in Solid-State Nanopores

The solid-state nanopore has attracted much attention as a next-generation DNA sequencing tool or a single-molecule biosensor platform with its high sensitivity of biomolecule detection. The platform has advantages of processability, robustness of the device, and flexibility in the nanopore dimensions as compared with the protein nanopore, but with the limitation of insufficient spatial and temporal resolution to be utilized in DNA sequencing. Here, the fundamental principles of the solid-state nanopore are summarized to illustrate the novelty of the device, and improvements in the performance of the platform in terms of device fabrication are explained. The efforts to reduce the electrical noise of solid-state nanopore devices, and thus to enhance the sensitivity of detection, are presented along with detailed descriptions of the noise properties of the solid-state nanopore. Applications of 2D materials including graphene, h-BN, and MoS₂ as a nanopore membrane to enhance the spatial resolution of nanopore detection, and organic coatings on the nanopore membranes for the addition of chemical functionality to the nanopore are summarized. Finally, the recently reported applications of the solid-state nanopore are categorized and described according to the target biomolecules: DNA-bound proteins, modified DNA structures, proteins, and protein oligomers.

Development of microfluidic platforms for the synthesis of metal complexes and evaluation of their DNA affinity using online FRET melting assays

Guanine-rich DNA sequences can fold into quadruple-stranded structures known as G-quadruplexes. These structures have been proposed to play important biological roles and have been identified as potential drug targets. As a result, there is increasing interest in developing small molecules that can bind to G-quadruplexes. So far, these efforts have been mostly limited to conventional batch synthesis. Furthermore, no quick on-line method to assess new G-quadruplex binders has been developed. Herein, we report on two new microfluidic platforms to: (a) readily prepare G-quadruplex binders (based on metal complexes) in flow, quantitatively and without the need for purification before testing; (b) a microfluidic platform (based on FRET melting assays of DNA) that enables the real-time and on-line assessment of G-quadruplex binders in continuous flow.

Fabrication of multiple nanopores in a SiNx membrane via controlled breakdown

This paper reports a controlled breakdown (CBD) method to fabricate multiple nanopores in a silicon nitride (SiN_x) membrane with control over both nanopore count and nanopore diameter. Despite the stochastic process of the breakdown, we found that the nanopores created via CBD, tend to be of the same diameter. We propose a membrane resistance model to explain and control the multiple nanopores forming in the membrane. We prove that the membrane resistance can reflect the number of nanopores in the membrane and that the diameter of the nanopores is controlled by the exposure time and strength of the electric field. This controllable multiple nanopore formation via CBD avoids the utilization of complicated instruments and time-intensive manufacturing. We anticipate CBD has the potential to become a nanopore fabrication technique which, integrated into an optical setup, could be used as a high-throughput and multichannel characterization technique.

Gate-Voltage-Controlled Threading DNA into Transistor Nanopores

We present a simple method for DNA translocation driven by applying AC voltages, such as square and sawtooth waves, on an embedded thin film as a gate electrode inside of a dielectric nanopore, without applying a conventional bias voltage externally across the pore membrane. Square waveforms on a gate can drive a single DNA molecule into a nanopore, which often returns from the pore, causing an oscillation across the membrane. An optimized sawtooth-like negative voltage pulse on the gate can thread a fraction of a DNA molecule into a pore after a single pulse. This trapped DNA molecule continues to finish its translocation slowly through the pore. The DNA's slow speed was comparable to previous findings of the escaping DNA speed from a nanopore estimated by the Smoluchowski equation with excluded-volume interactions of a long-chain molecule and electrophoresis by extremely low electric fields. This simple scheme, controlling DNA molecules only by gate potential modulation at a nanopore, will provide an additional method to thread, translocate, or oscillate a single biomolecule at a gated nanopore.

Instrumentation for low noise nanopore-based ionic current recording under laser illumination

We describe a nanopore-based optofluidic instrument capable of performing low-noise ionic current recordings of individual biomolecules under laser illumination. In such systems, simultaneous optical measurements generally introduce significant parasitic noise in the electrical signal, which can severely reduce the instrument sensitivity, critically hindering the monitoring of single-molecule events in the ionic current traces. Here, we present design rules and describe simple adjustments to the experimental setup to mitigate the different noise sources encountered when integrating optical components to an electrical nanopore system. In particular, we address the contributions to the electrical noise spectra from illuminating the nanopore during ionic current recording and mitigate those effects through control of the illumination source and the use of a PDMS layer on the SiN_x membrane. We demonstrate the effectiveness of our noise minimization strategies by showing the detection of DNA translocation events during membrane illumination with a signal-to-noise ratio of ∼10 at 10 kHz bandwidth. The instrumental guidelines for noise minimization that we report are applicable to a wide range of nanopore-based optofluidic systems and offer the possibility of enhancing the quality of synchronous optical and electrical signals obtained during single-molecule nanopore-based analysis.

Highly reliable and low-noise solid-state nanopores with an atomic layer deposited ZnO membrane on a quartz substrate

We present a fabrication scheme for a solid-state ZnO nanopore membrane directly deposited on top of a quartz substrate by atomic layer deposition (ALD) and investigate the characteristics of DNA translocation through the nanopores. We chose a ZnO membrane owing to its high isoelectric point (∼9.5) as well as its chemical and mechanical stability. Aside from the extremely low noise level exhibited by this device on a highly insulating and low dielectric quartz substrate, it also slows down the translocation speed of DNA by more than one order of magnitude as compared to that of a SiN_x nanopore device. We propose that the electrostatic interaction between the positively charged ZnO nanopore wall, resulting from the high isoelectric point of ZnO, and the negatively charged phosphate backbone of DNA provides an additional frictional force that slows down the DNA translocation.

Enhancing the sensitivity of DNA detection by structurally modified solid-state nanopore

Solid-state nanopore is an ionic current-based biosensing platform, which would be a top candidate for next-generation DNA sequencing and a high-throughput drug-screening tool at single-molecular-scale resolution. There have been several approaches to enhance the sensitivity and reliability of biomolecule detection using the nanopores particularly in two aspects: signal-to-noise ratio (SNR) and translocation dwell time. In this study, an additional nano-well of 100-150 nm diameter and the aspect ratio of ∼5 called 'guide structure' was inserted in conventional silicon-substrate nanopore device to increase both SNR and dwell time. First, the magnitude of signals (conductance drop (ΔG)) increased 2.5 times under applied voltage of 300 mV through the guide-inserted nanopore compared to the conventional SiN/Si nanopore in the same condition. Finite element simulation was conducted to figure out the origin of ΔG modification, which showed that the guide structure produced high ΔG due to the compartmental limitation of ion transports through the guide to the sensing nanopore. Second, the translocation velocity decreased in the guide-inserted structure to a maximum of 20% of the velocity in the conventional device at 300 mV. Electroosmotic drag formed inside the guide structure, when directly applied to the remaining segment of translocating DNA molecules in cis chamber, affected the DNA translocation velocity. This study is the first experimental report on the effect of the geometrical confinement to a remnant DNA on both SNR and dwell time of nanopore translocations.

Nanopore extended field-effect transistor for selective single-molecule biosensing

There has been a significant drive to deliver nanotechnological solutions to biosensing, yet there remains an unmet need in the development of biosensors that are affordable, integrated, fast, capable of multiplexed detection, and offer high selectivity for trace analyte detection in biological fluids. Herein, some of these challenges are addressed by designing a new class of nanoscale sensors dubbed nanopore extended field-effect transistor (nexFET) that combine the advantages of nanopore single-molecule sensing, field-effect transistors, and recognition chemistry. We report on a polypyrrole functionalized nexFET, with controllable gate voltage that can be used to switch on/off, and slow down single-molecule DNA transport through a nanopore. This strategy enables higher molecular throughput, enhanced signal-to-noise, and even heightened selectivity via functionalization with an embedded receptor. This is shown for selective sensing of an anti-insulin antibody in the presence of its IgG isotype.

Efficient detection of single molecules is vital to many biosensing technologies, which require analytical platforms with high selectivity and sensitivity. Ren et al. combine a nanopore sensor and a field-effect transistor, whereby gate voltage mediates DNA and protein transport through the nanopore.

Through a Window, Brightly: A Review of Selected Nanofabricated Thin-Film Platforms for Spectroscopy, Imaging, and Detection

We present a review of the use of selected nanofabricated thin films to deliver a host of capabilities and insights spanning bioanalytical and biophysical chemistry, materials science, and fundamental molecular-level research. We discuss approaches where thin films have been vital, enabling experimental studies using a variety of optical spectroscopies across the visible and infrared spectral range, electron microscopies, and related techniques such as electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and single molecule sensing. We anchor this broad discussion by highlighting two particularly exciting exemplars: a thin-walled nanofluidic sample cell concept that has advanced the discovery horizons of ultrafast spectroscopy and of electron microscopy investigations of in-liquid samples; and a unique class of thin-film-based nanofluidic devices, designed around a nanopore, with expansive prospects for single molecule sensing. Free-standing, low-stress silicon nitride membranes are a canonical structural element for these applications, and we elucidate the fabrication and resulting features-including mechanical stability, optical properties, X-ray and electron scattering properties, and chemical nature-of this material in this format. We also outline design and performance principles and include a discussion of underlying material preparations and properties suitable for understanding the use of alternative thin-film materials such as graphene.

Selective single molecule nanopore sensing of proteins using DNA aptamer-functionalised gold nanoparticles

Single molecule detection methods, such as nanopore sensors have found increasing importance in applications ranging from gaining a better understanding of biophysical processes to technology driven solutions such as DNA sequencing. However, challenges remain especially in relation to improving selectivity to probe specific targets or to alternatively enable detection of smaller molecules such as small-sized proteins with a sufficiently high signal-to-noise ratio. In this article, we propose a solution to these technological challenges by using DNA aptamer-modified gold nanoparticles (AuNPs) that act as a molecular carrier through the nanopore sensor. We show that this approach offers numerous advantages including: high levels of selectivity, efficient capture from a complex mixture, enhanced signal, minimized analyte-sensor surface interactions, and finally can be used to enhance the event detection rate. This is demonstrated by incorporating a lysozyme binding aptamer to a 5 nm AuNP carrier to selectively probe lysozyme within a cocktail of proteins. We show that nanopores can reveal sub-complex molecular information, by discriminating the AuNP from the protein analyte, indicating the potential use of this technology for single molecule analysis of different molecular analytes specifically bound to AuNP.

Nanoscale direct mapping of localized and induced noise sources on conducting polymer films

The localized noise-sources and those induced by external-stimuli were directly mapped by using a conducting-AFM integrated with a custom-designed noise measurement set-up. In this method, current and noise images of a poly(9,9-dioctylfluorene)-polymer-film on a conducting-substrate were recorded simultaneously, enabling the mapping of the resistivity and noise source density (NT). The polymer-films exhibited separate regions with high or low resistivities, which were attributed to the ordered or disordered phases, respectively. A larger number of noise-sources were observed in the disordered-phase-regions than in the ordered-phase regions, due to structural disordering. Increased bias-voltages on the disordered-phase-regions resulted in increased NT, which is explained by the structural deformation at high bias-voltages. On photo-illumination, the ordered-phase-regions exhibited a rather large increase in the conductivity and NT. Presumably, the illumination released carriers from deep-traps which should work as additional noise-sources. These results show that our methods provide valuable insights into noise-sources and, thus, can be powerful tools for basic research and practical applications of conducting polymer films.

Suspended Solid-state Membranes on Glass Chips with Sub 1-pF Capacitance for Biomolecule Sensing Applications

Solid-state membranes are finding use in many applications in nanoelectronics and nanomedicine, from single molecule sensors to water filtration, and yet many of their electronics applications are limited by the relatively high current noise and low bandwidth stemming from the relatively high capacitance (>10 pF) of the membrane chips. To address this problem, we devised an integrated fabrication process to grow and define circular silicon nitride membranes on glass chips that successfully lower the chip capacitance to below 1 pF. We use these devices to demonstrate low-noise, high-bandwidth DNA translocation measurements. We also make use of this versatile, low-capacitance platform to suspend other thin, two-dimensional membrane such as graphene.

Simultaneous Electro-Optical Tracking for Nanoparticle Recognition and Counting

We present the first detailed experimental observation and analysis of nanoparticle electrophoresis through a nanochannel obtained with synchronous high-bandwidth electrical and camera recordings. Optically determined particle diffusion coefficients agree with values extracted from fitting electrical transport measurements to distributions from 1D Fokker-Planck diffusion-drift theory. This combined tracking strategy enables optical recognition and electrical characterization of nanoparticles in solution, which can have a broad range of applications in biology and materials science.

Selectively Sized Graphene-Based Nanopores for in Situ Single Molecule Sensing

The use of nanopore biosensors is set to be extremely important in developing precise single molecule detectors and providing highly sensitive advanced analysis of biological molecules. The precise tailoring of nanopore size is a significant step toward achieving this, as it would allow for a nanopore to be tuned to a corresponding analyte. The work presented here details a methodology for selectively opening nanopores in real-time. The tunable nanopores on a quartz nanopipette platform are fabricated using the electroetching of a graphene-based membrane constructed from individual graphene nanoflakes (ø ∼30 nm). The device design allows for in situ opening of the graphene membrane, from fully closed to fully opened (ø ∼25 nm), a feature that has yet to be reported in the literature. The translocation of DNA is studied as the pore size is varied, allowing for subfeatures of DNA to be detected with slower DNA translocations at smaller pore sizes, and the ability to observe trends as the pore is opened. This approach opens the door to creating a device that can be target to detect specific analytes.

Label-free screening of single biomolecules through resistive pulse sensing technology for precision medicine applications

Employing integrated nano- and microfluidic circuits for detecting and characterizing biological compounds through resistive pulse sensing technology is a vibrant area of research at the interface of biotechnology and nanotechnology. Resistive pulse sensing platforms can be customized to study virtually any particle of choice which can be threaded through a fluidic channel and enable label-free single-particle interrogation with the primary read-out signal being an electric current fingerprint. The ability to perform label-free molecular screening with single-molecule and even single binding site resolution makes resistive pulse sensing technology a powerful tool for analyzing the smallest units of biological systems and how they interact with each other on a molecular level. This task is at the core of experimental systems biology and in particular 'omics research which in combination with next-generation DNA-sequencing and next-generation drug discovery and design forms the foundation of a novel disruptive medical paradigm commonly referred to as personalized medicine or precision medicine. DNA-sequencing has approached the 1000-Dollar-Genome milestone allowing for decoding a complete human genome with unmatched speed and at low cost. Increased sequencing efficiency yields massive amounts of genomic data. Analyzing this data in combination with medical and biometric health data eventually enables understanding the pathways from individual genes to physiological functions. Access to this information triggers fundamental questions for doctors and patients alike: what are the chances of an outbreak for a specific disease? Can individual risks be managed and if so how? Which drugs are available and how should they be applied? Could a new drug be tailored to an individual's genetic predisposition fast and in an affordable way? In order to provide answers and real-life value to patients, the rapid evolvement of novel computing approaches for analyzing big data in systems genomics has to be accompanied by an equally strong effort to develop next-generation DNA-sequencing and next-generation drug screening and design platforms. In that context lab-on-a-chip devices utilizing nanopore- and nanochannel based resistive pulse-sensing technology for DNA-sequencing and protein screening applications occupy a key role. This paper describes the status quo of resistive pulse sensing technology for these two application areas with a special focus on current technology trends and challenges ahead.

An integrated system for optical and electrical detection of single molecules/particles inside a solid-state nanopore

Nanopore techniques have proven to be useful tools for single-molecule detection. The combination of optical detection and ionic current measurements enables a new possibility for the parallel readout of multiple nanopores without complex nanofluidics and embedded electrodes. In this study, we developed a new integrated system for the label-free optical and electrical detection of single molecules based on a metal-coated nanopore. The entire system, containing a dark-field microscopy system and an ultralow current detection system with high temporal resolution, was designed and fabricated. An Au-coated nanopore was used to generate the optical signal. Light scattering from a single Au-coated nanopore was measured under a dark-field microscope. A lab-built ultralow current detection system was designed for the correlated optical and electrical readout. This integrated system might provide more direct and detailed information on single analytes inside the nanopore compared with classical ionic current measurements.