Controlling surface mobility in interdiffusing polyelectrolyte multilayers

Layer-by-layer assembly methods and their biomedical applications

Various biomedical applications arising due to the development of different LbL assembly methods with unique process properties.

Tuning the Surface Properties of Poly(Allylamine Hydrochloride)-Based Multilayer Films

The layer-by-layer (LbL) method of polyelectrolyte multilayer (PEM) fabrication is extremely versatile. It allows using a pair of any oppositely charged polyelectrolytes. Nevertheless, it may be difficult to ascribe a particular physicochemical property of the resulting PEM to a structural or chemical feature of a single component. A solution to this problem is based on the application of a polycation and a polyanion obtained by proper modification of the same parent polymer. Polyelectrolyte multilayers (PEMs) were prepared using the LbL technique from hydrophilic and amphiphilic derivatives of poly(allylamine hydrochloride) (PAH). PAH derivatives were obtained by the substitution of amine groups in PAH with sulfonate, ammonium, and hydrophobic groups. The PEMs were stable in 1 M NaCl and showed three different modes of thickness growth: exponential, mixed exponential-linear, and linear. Their surfaces ranged from very hydrophilic to hydrophobic. Root mean square (RMS) roughness was very variable and depended on the PEM composition, sample environment (dry, wet), and the polymer constituting the topmost layer. Atomic force microscopy (AFM) imaging of the surfaces showed very different morphologies of PEMs, including very smooth, porous, and structured PEMs with micellar aggregates. Thus, by proper choice of PAH derivatives, surfaces with different physicochemical features (growth type, thickness, charge, wettability, roughness, surface morphology) were obtained.

Fabrication of 3D Ordered Structures with Multiple Materials via Macroscopic Supramolecular Assembly

Integration of diverse materials into 3D ordered structures is urgently required for advanced manufacture owing to increase in demand for high-performance products. Most additive manufacturing techniques mainly focus on simply combining different equipment, while interfacial binding of distinctive materials remains a fundamental problem. Increasing studies on macroscopic supramolecular assembly (MSA) have revealed efficient interfacial interactions based on multivalency of supramolecular interactions facilitated by a "flexible spacing coating." To demonstrate facile fabrication of 3D heterogeneous ordered structures, the combination of MSA and magnetic field-assisted alignment has been developed as a new methodology for in situ integration of a wide range of materials, including elastomer, resin, plastics, metal, and quartz glass, with modulus ranging from tens of MPa to over 70 GPa. Assembly of single material, coassembly of two to four distinctive materials, and 3D alignment of "bridge-like" and "cross-stacked" heterogeneous structures are demonstrated. This methodology has provided a new solution to mild and efficient assembly of multiple materials at the macroscopic scale, which holds promise for advanced fabrication in fields of tissue engineering, electronic devices, and actuators.

Emerging trends in the dynamics of polyelectrolyte complexes

Polyelectrolyte complexes (PECs) are highly tunable materials that result from the phase separation that occurs upon mixing oppositely charged polymers. Over the years, they have gained interest due to their broad range of applications such as drug delivery systems, protective coatings, food packaging, and surface adhesives. In this review, we summarize the structure, phase transitions, chain dynamics, and rheological and thermal properties of PECs. Although most literature focuses upon the thermodynamics and application of PECs, this review highlights the fundamental role of salt and water on mechanical and thermal properties impacting the PEC's dynamics. A special focus is placed upon experimental results and techniques. Specifically, the review examines phase behaviour and salt partitioning in PECs, as well as different techniques used to measure diffusion coefficients, relaxation times, various superpositioning principles, glass transitions, and water microenvironments in PECs. This review concludes with future areas of opportunity in fundamental studies and best practices in reporting.

Weak polyelectrolyte-based multilayers via layer-by-layer assembly: Approaches, properties, and applications

Layer-by-layer (LbL) assembly is a nanoscale technique with great versatility, simplicity and molecular-level processing of various nanoscopic materials. Weak polyelectrolytes have been used as major building blocks for LbL assembly providing a fundamental and versatile tool to study the underlying mechanisms and practical applications of LbL assembly due to its pH-responsive charge density and molecular conformation. Because of high-density uncompensated charges and high-chain mobility, weak polyelectrolyte exponential multilayer growth is considered one of the fastest developing areas for organized molecular films. In this article, we systematically review the current status and developments of weak polyelectrolyte-based multilayers including all-weak-polyelectrolyte multilayers, weak polyelectrolytes/other components (e.g. strong polyelectrolytes, neutral polymers, and nanoparticles) multilayers, and exponentially grown weak polyelectrolyte multilayers. Several key aspects of weak polyelectrolytes are highlighted including the pH-controllable properties, the responsiveness to environmental pH, and synergetic functions obtained from weak polyelectrolyte/other component multilayers. Throughout this review, useful applications of weak polyelectrolyte-based multilayers in drug delivery, tunable biointerfaces, nanoreactors for synthesis of nanostructures, solid state electrolytes, membrane separation, and sensors are highlighted, and promising future directions in the area of weak polyelectrolyte-based multilayer assembly such as fabrication of multi-responsive materials, adoption of unique building blocks, investigation of internal molecular-level structure and mechanism of exponentially grown multilayers, and exploration of novel biomedical and energy applications are proposed.

Humidity-Triggered Relaxation of Polyelectrolyte Complexes as a Robust Approach to Generate Extracellular Matrix Biomimetic Films

Generating a biofunctional film that can mimic the extracellular matrix (ECM) in an efficient and robust technique that may have great potential for medical devices, tissue engineering, and regenerative medicines. Herein, a facile approach to generate ECM biomimetic films based on the humidity-triggered relaxation of polyelectrolyte complex (PEC) nanoparticles is reported. The poly(l-lysine) and hyaluronan are precomplexed and sprayed onto a substrate, which, via a trigger of vaporous water, can be transformed into an even and stable film. The spontaneous polymer chain interfusion (diffusion coefficient ≈1.01 × 10^-9  cm²  s^-1 ) under saturated humidity, allowing for the rapid reorganization (within 30 min) of film morphology and structure is demonstrated. A controllable and scalable way for the loading of diversified bioactive agents, as well as on-demand modulation of stiffness is further presented. Moreover, the high-throughput arrays and programmed patterns can be easily completed, suggesting huge potentials that surpass those of state-of-the-art methods. Combined with high efficiency and flexible functionalization, it is believed that this approach should be beneficial for extending the practical applications of PEC films, such as medical implants, chip detectors, and so on.

Tracking Sulfonated Polystyrene Diffusion in a Chitosan/Carboxymethyl Cellulose Layer-by-Layer Film: Exploring the Internal Architecture of Nanocoatings

Since chitosan presents the ability to interact with a wide range of molecules, it has been one of the most popular natural polymers for the construction of layer-by-layer thin films. In this study, depth-profiling X-ray photoelectron spectroscopy (XPS) was employed to track the diffusion of sulfonated polystyrene (SPS) in carboxymethyl cellulose/chitosan (CMC/Chi) multilayers. Our findings suggest that the CMC/Chi film does not constitute an electrostatic barrier sufficient to block diffusion of SPS, and that diffusion can be controlled by adjusting the diffusion time and the molecular weight of the polymers that compose the CMC/Chi system. In addition to monitoring the diffusion, it was also possible to observe a process of preferential interaction between Chi and SPS. Thus, the nitrogen N 1s peak, due to functional groups found exclusively in chitosan chains, was the key factor to identifying the molecular interactions involving chitosan and the different polyanions. Accordingly, the presence of a strong polyanion such as SPS shifts the N 1s peak to a higher level of binding energy. Such results highlight that understanding the fundamentals of polymer interactions is a major step to fine-tuning the internal architecture of LbL structures for specific applications (e.g., drug release).

Ionic liquid-induced nanoporous structures of polymer films

Nanoporous polymer thin films can be fabricated using strong polyelectrolyte pairs in ionic liquid aqueous solutions.

Engineering Thiolated Surfaces with Polyelectrolyte Multilayers

Interfaces bearing firmly attached thiol groups are useful for many applications requiring the versatile and facile chemistry of the -SH functionality. In this work, rugged ultrathin films were prepared on substrates using layer-by-layer assembly. The surface of these smooth films was capped with a co-polymer containing benzyl mercaptan units. The utility of this coating was illustrated by three applications. First, thiol-ene "click" chemistry was used to introduce the Arg-Gly-Asp (RGD) adhesive peptide sequence on a surface that otherwise resisted good adhesion of fibroblasts. This treatment promoted cell adhesion and spreading. Similar Michael addition chemistry was employed to attach poly(ethylene glycol) to the surface, which reduced fouling by (adhesion of) serum albumin. Finally, the affinity of gold for -SH was exploited by depositing a layer of gold nanoparticles on the thiolated surface or by evaporating a tenacious film of gold without using the classical chromium "primer" layer.

Polymers with a Coiled Conformation Enable Healing of Wide and Deep Damages in Polymeric Films

The development of efficient methods to trigger high mobility of polymer chains to migrate across the damaged areas is key for healing wide damages in intrinsic healable polymeric films deposited on solid substrates. Herein, we establish a facile strategy for the fabrication of polymeric films with a superhigh healing capability by controlling the conformational transition of the polymer chains in polymeric films. The alternately spin-coated poly(acrylic acid) (PAA)/polyurethane (PU) films with coiled PU can heal cuts with a width of 6 times the thickness of the PAA/PU films in the presence of ethanol. In contrast, the same PAA/PU films with stretched PU or those films with coiled PU but without conformational transition from a coiled state to a stretched state fail to heal cuts. The conformational transition of PU from a coiled state to a stretched state in PAA/PU films triggered by ethanol enables a long-distance migration of PAA and PU polymers to heal wide mechanical damages.

Restructuring of poly(2-ethyl-2-oxazoline)/tannic acid multilayers into fibers

H-Bonded, pH-responsive poly(2-ethyl-2-oxazoline) (PEOX) and tannic acid (TA) multilayers were prepared by layer-by-layer deposition. Free-floating PEOX/TA multilayers were shown to restructure in a pH3 phosphate buffer solution to H-bonded, pH-responsive PEOX/TA fibers. This restructuring was also evident during the growth of multilayers thicker than 15 bilayers (BL). The growth profile of 30 BL-thick films showed a significant decrease in the film thickness from 118 nm to 85 nm between 15 BL and 20 BL, after which the growth trend was regained with some small fluctuations. This decrease was associated with the detachment of film patches from the top surface of the film. The rinse solutions consisted of fibrous aggregates, which were formed by the restructuring of the detached multilayer patches. These fibers were characterized by TGA, XPS, FTIR and SEM measurements which showed that the fibers consisted of H-bonded PEOX and TA molecules. As such, the fibers were pH-responsive and disintegrated at pH > 8.5. Scanning electron microscopy images indicated that the fibers might have been formed by the curling of planar LbL film patches and the dried fibers looked like collapsed hollow tubes on solid substrates. These results contribute to our understanding of the stability of LbL films in various chemical conditions and the ways to modify the morphology of self-assembled structures. pH-responsive fibrous aggregates are important in a variety of biomedical applications, from controlled release to sensors.

Stiffer but More Healable Exponential Layered Assemblies with Boron Nitride Nanoplatelets

Self-healing ability and the elastic modulus of polymeric materials may seem conflicting because of their opposite dependence on chain mobility. Here, we show that boron nitride (BN) nanoplatelets can simultaneously enhance these seemingly contradictory properties in exponentially layer-by-layer-assembled nanocomposites as both surface coatings and free-standing films. On one hand, embedding hard BN nanoplatelets into a soft hydrogen bonding network can enhance the elastic modulus and ultimate strength through effective load transfer strengthened by the incorporation of interfacial covalent bonding; on the other hand, during a water-enabled self-healing process, these two-dimensional flakes induce an anisotropic diffusion, maintain the overall diffusion ability of polymers at low loadings, and can be "sealing" agents to retard the out-of-plane diffusion, thereby hampering polymer release into the solution. A detailed mechanism study supported by a theoretical model reveals the critical parameters for achieving a complete self-healing process. The insights gained from this work may be used for the design of high-performance smart materials based on other two-dimensional fillers.

Subdiffraction-Resolution Optical Measurements of Molecular Transport in Thin Polymer Films

The measurement of molecular transport within polymer films yields information about the internal structural organization of the films and is useful in applications such as the design of polymeric capsules for drug delivery. Layer-by-layer assembly of polyelectrolyte multilayer films has been widely used in such applications where the multilayer structure often exhibits anisotropic transport resulting in different diffusivities in the lateral (parallel to the film) and transverse (normal to the film) directions. Although lateral transport can be probed using techniques such as fluorescence recovery after photobleaching (FRAP), it cannot be applied to probing transverse diffusivity in polymer films smaller than the diffraction limit of light. Here we present a technique to probe the transport of molecules tagged with fluorphores in polymer films thinner than the optical diffraction limit using the modulation of fluorescence emission depending on the distance of the tagged molecules from a metal surface. We have used this technique to probe the diffusion of proteins biotin and bovine serum albumin (BSA) in polyelectrolyte multilayer films. We also studied the interdiffusion of chains in multilayer films using this technique. We observed a 3 order of magnitude increase in interdiffusion as a function of the ionic strength of the medium. This technique, along with FRAP, will be useful in studying anisotropic transport in polymer films, even those thinner than the diffraction limit, because the signal in this technique arises only from transverse and not lateral transport. Finally, this technique is also applicable to studying the diffusion of chromophore-labeled species within a polymer film. We demonstrate this aspect by measuring the transverse diffusion of methylene blue in the PAH-PAA multilayer system.

Incorporation of a Metal Oxide Interlayer using a Virus-Templated Assembly for Synthesis of Graphene-Electrode-Based Organic Photovoltaics

Transition metal oxide (TMO) thin films have been exploited as interlayers for charge extraction between electrodes and active layers in organic photovoltaic (OPV) devices. Additionally, graphene-electrode-based OPVs have received considerable attention as a means to enhance device stability. However, the film deposition process of a TMO thin-film layer onto the graphene electrode is highly restricted owing to the hydrophobic nature of the graphene surface; thus, the preparation of the device should rely on a vacuum process that is incompatible with solution processing. In this study, we present a novel means for creating a thin tungsten oxide (WO3 ) interlayer on a graphene electrode by employing an engineered biotemplate of M13 viruses, whereby nondestructive functionalization of the graphene and uniform synthesis of a WO3 thin interlayer are concurrently achieved. As a result, the incorporated virus-templated WO3 interlayer exhibited solar-conversion efficiency that was 20 % higher than that of conventional OPVs based on the use of a (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (

PEDOT

PSS) interlayer. Notably, bilayer-structured OPVs with synergistically integrated WO3 /PEDOT:PSS achieved >60 % enhancement in device performance.

Self-Assembly Technique for Biomedical Applications

Layer-by-layer (LbL) self-assembly has attracted extensive attention for its simplicity and versatility. Self-assembly has many potential applications, among which biomedical applications is especially important because it can be used as a means of generating drug delivery and biomedical materials. Based on this, most recent progress in the field of self-assembly technique for drug delivery and biomedical material applications are summarized in this mini review. The remaining challenges are also mentioned.

Learning from nature - novel synthetic biology approaches for biomaterial design

Many biomaterials constructed today are complex chemical structures that incorporate biologically active components derived from nature, but the field can still be said to be in its infancy. The need for materials that bring sophisticated properties of structure, dynamics and function to medical and non-medical applications will only grow. Increasing appreciation of the functionality of biological systems has caused biomaterials researchers to consider nature for design inspiration, and many examples exist of the use of biomolecular motifs. Yet evolution, nature's only engine for the creation of new designs, has been largely ignored by the biomaterials community. Molecular evolution is an emerging tool that enables one to apply nature's engineering principles to non-natural situations using variation and selection. The purpose of this review is to highlight the most recent advances in the use of molecular evolution in synthetic biology applications for biomaterial engineering, and to discuss some of the areas in which this approach may be successfully applied in the future.

Location of the bacteriophage P22 coat protein C-terminus provides opportunities for the design of capsid-based materials

Rational design of modifications to the interior and exterior surfaces of virus-like particles (VLPs) for future therapeutic and materials applications is based on structural information about the capsid. Existing cryo-electron microscopy-based models suggest that the C-terminus of the bacteriophage P22 coat protein (CP) extends toward the capsid exterior. Our biochemical analysis through genetic manipulations of the C-terminus supports the model where the CP C-terminus is exposed on the exterior of the P22 capsid. Capsids displaying a 6xHis tag appended to the CP C-terminus bind to a Ni affinity column, and the addition of positively or negatively charged coiled coil peptides to the capsid results in association of these capsids upon mixing. Additionally, a single cysteine appended to the CP C-terminus results in the formation of intercapsid disulfide bonds and can serve as a site for chemical modifications. Thus, the C-terminus is a powerful location for multivalent display of peptides that facilitate nanoscale assembly and capsid modification.

Layer-by-layer assembly of ferrocene-modified linear polyethylenimine redox polymer films

Herein, both electrostatic and covalent layer-by-layer assembly were used for the construction of multicomposite thin films using a ferrocene-modified linear poly(ethylenimine) redox polymer (Fc-C6-LPEI) as the cationic polyelectrolye, and poly(acrylic acid) (PAA), poly(glutamic acid) (PGA), or glucose oxidase (GOX) as the negative polyelectrolyte. The assembly of the multilayer films was characterized by cyclic voltammetry (CV), UV/Vis spectroscopy, and ellipsometry with the enzymatic response of the films containing GOX being characterized via constant potential amperometry. CV measurements suggested that the successful buildup of multilayer films was dependent upon the nature of the anionic polyelectrolyte used. Electrostatic assembly of films composed of Fc-C6-LPEI and either PAA or PGA produced large oxidation peak current densities of 630 and 670 μA cm(-2), respectively, during cyclic voltammetry. Increased measured absorbance by UV/Vis spectroscopy and increased measured film thicknesses (400-600 nm) by ellipsometry provided additional evidence of successful film formation. In contrast, the films incorporating GOX that were electrostatically assembled surprisingly produced significantly lower electrochemical responses (12 μA cm(-2)), low absorbance values, and reduced film thicknesses (~15 nm), and glucose electro-oxidation current densities less than 1 μA cm(-2), which all suggested unstable or minimal film formation. Subsequently, we developed a covalent layer-by-layer approach to fabricate films of Fc-C6-LPEI/GOX by covalently linking the amine groups of Fc-C6-LPEI to the aldehyde groups of periodate-oxidized glucose oxidase. Covalent assembly of the Fc-C6-LPEI/GOX films produced oxidation peak current densities during cyclic voltammetry of 40 μA cm(-2) and glucose electro-oxidation current densities of 220 μA cm(-2). These films also showed an increase in their thicknesses (~140 nm) relative to the electrostatic GOX films. For the films containing either PAA or PGA, the pH of the polymer solutions used for construction was found to have a significant effect on the response of the multilayer films, and the electrochemical response of the Fc-C6-LPEI/PAA, Fc-C6-LPEI/PGA, or covalently assembled Fc-C6-LPEI/GOX films could be tuned by varying the number of bilayers (n=1-16) in the film. These results are important because this is the first report of the use of the novel Fc-C6-LPEI redox polymer in the successful development of multicomposite layer-by-layer films. The electrochemical response achieved with the covalently assembled Fc-C6-LPEI/GOX films demonstrates that this redox polymer and layer-by-layer assembly technique can be used for possible biosensor and biofuel applications, and the success of multiple anionic polyelectrolytes could lead to additional applications with other enzyme systems.

Controlling surface properties of polyelectrolyte multilayers by assembly pH

The control of surface properties such as the morphology, roughness, stiffness, and wettability of polyelectrolyte multilayers was carried out using poly(diallyldimethylammonium chloride) (PDADMAC) and poly(4-styrenesulfonic acid-co-maleic acid, 1 : 1 SS : MA) sodium salt (PSSMA 1 : 1) as the building blocks via adjusting the assembly pH value. We found that the surface roughness of the multilayers increased with increasing assembly pH value, and that the morphology was quite different at various assembly pH values when PSSMA was assembled as the final layer. However, the surface roughness and morphology of the multilayers (PDADMAC as the final layer) showed no apparent change at various assembly pH values. Interestingly, the stiffness of the PSSMA/PDADMAC multilayers could be tuned. Nanoindentation measurements by SFM showed that the hardness of the multilayers was very different at various pH values when PSSMA was the outermost layer. Conversely, the hardness of the multilayers remained unchanged regardless of the pH when PDADMAC was the outermost layer. The water contact angle hysteresis (the difference between the advancing and receding contact angles) of the multilayers was largely affected by both surface roughness and surface hydrophilic groups which could also be tuned by assembly pH.

Depth-profiling X-ray photoelectron spectroscopy (XPS) analysis of interlayer diffusion in polyelectrolyte multilayers

Functional organic thin films often demand precise control over the nanometer-level structure. Interlayer diffusion of materials may destroy this precise structure; therefore, a better understanding of when interlayer diffusion occurs and how to control it is needed. X-ray photoelectron spectroscopy paired with C60(+) cluster ion sputtering enables high-resolution analysis of the atomic composition and chemical state of organic thin films with depth. Using this technique, we explore issues common to the polyelectrolyte multilayer field, such as the competition between hydrogen bonding and electrostatic interactions in multilayers, blocking interlayer diffusion of polymers, the exchange of film components with a surrounding solution, and the extent and kinetics of interlayer diffusion. The diffusion coefficient of chitosan (M = ∼100 kDa) in swollen hydrogen-bonded poly(ethylene oxide)/poly(acrylic acid) multilayer films was examined and determined to be 1.4*10(-12) cm(2)/s. Using the high-resolution data, we show that upon chitosan diffusion into the hydrogen-bonded region, poly(ethylene oxide) is displaced from the film. Under the conditions tested, a single layer of poly(allylamine hydrochloride) completely stops chitosan diffusion. We expect our results to enhance the understanding of how to control polyelectrolyte multilayer structure, what chemical compositional changes occur with diffusion, and under what conditions polymers in the film exchange with the solution.

Multidimensional Assembly of S-Layer Proteins on Mobility-Controlled Polyelectrolyte Multilayers

Polyelectrolyte multilayers have been vastly utilized as an assembling platform for various biomaterials because of their soft and charged surface characteristics, analogous to biomembrane systems. In particular, polyelectrolyte chains with high self-diffusivity can effectively transfer the surface mobility to the assembling biomolecular species, facilitating the ordered self-assembly. Herein, highly diffusional cationic polyelectrolyte chains of linear polyethylenimine are employed to induce direct binding with negatively charged bacterial surface layer proteins, which eventually lead to large-scale two-dimensional crystals. Notably, at the elevated incubation temperature, a transitory intermediate of one-dimensional chain structure is observed. We reveal that this one-dimensional intermediate is a stable precursor toward two-dimensional crystal arrays.

Dual roles of hyaluronic acids in multilayer films capturing nanocarriers for drug-eluting coatings

We developed hyaluronic acid (HA)-based multilayer films capturing polymeric nanocarriers (NCs) for drug delivery. The electrostatic interactions between positively charged linear polyethylene imines (LPEI) and negatively charged HAs are the main driving forces to form multilayers based on the layer-by-layer (LbL) deposition. NCs were easily incorporated within the multilayer film due to intra- and/or inter-hydrogen bonding among HA chains. The amount of NCs captured by the HA chains was varied by the ratio between HAs and NCs as well as the length (i.e., molecular weight) and absolute number density of HAs in solution. Biocompatibility of the NC-capturing HA multilayer films was tested with the human dermal fibroblast (HDF) culture. In addition, the controlled release of paclitaxel (PTX) from the HA multilayer films successfully led to the apoptosis of human aortic smooth muscle cells (hSMC) in vitro, implying that the NC-capturing HA multilayer films would be quite useful as drug-eluting stent systems to prevent the restenosis after surgery.

Layer-by-layer assembly of polyelectrolyte multilayers in three-dimensional inverse opal structured templates

A novel means of layer-by-layer deposition (LbL) of polyelectrolyte multilayers on three-dimensionally porous inverse opal (3D-IO) structures is presented. The 3D-IO structures comprising UV-curable polymer are highly flexible and can be readily demonstrated as free-standing films with double-sided open porosity over a large scale. A conflict between the intrinsically hydrophobic polymeric structures and waterborne characteristics of the LbL deposition process is overcome by employing a mixed solvent system of water and alcohol. The deposition pH of the LbL assembly can strongly affect the charge density and the degree of entanglement of polyelectrolyte chains, resulting in contrastingly different film deposition and growth behaviors. Since this method utilizes a three-dimensionally structured surface as a deposition substrate, 3D-IO films with a thickness of tens of micrometers can be uniformly and completely deposited with polyelectrolyte multilayers using only several tens of bilayer depositions, which can offer a new pathway of fabricating functionalized polymeric films. Finally, the LbL treated 3D-IO films are applied to nanofiltration membranes for removing multivalent metallic cations. Due to the enhanced Donnan exclusion effect as a result of multiple interfaces formed inside the 3D-IO structures and the relatively large volumetric ratio of water-permeable polyelectrolyte complexes, outstanding membrane performance was observed. Specifically, a good rejection rate of metal ions was achieved even under highly diluted feed conditions without sacrificing the high permeation flux.

Hierarchical nanoflake surface driven by spontaneous wrinkling of polyelectrolyte/metal complexed films

A mechanical or physical change observed in nanocomposite thin films has recently offered new opportunities to generate intriguing nanostructures. In this study, we present a novel means of creating a hierarchically developed nanoflake structure by exploiting surface wrinkles that occur during the incorporation process of metallic nanoparticles into layer-by-layer assembled polyelectrolyte multilayer (PEM) thin films. The PEM film composed with linear polyethylenimine (LPEI) and poly(acrylic acid) (PAA) allows for facilitated cationic exchange reaction within the film even after the electrostatic complexation and chemical cross-linking reaction. The subsequent reduction process induces an in situ complexation of metallic nanoparticles with a PEM matrix, causing an accumulation of lateral compressive stress for surface wrinkling. The wrinkling characteristics of the complexed films can be theoretically interpreted by employing the gradationally swollen film model, whereby a gradual change in the elastic property along the axial direction of the film can be appropriately reflected. In addition, wrinkled surfaces are further processed to form vertically aligned and hierarchically ordered nanoflakes after selective removal of the PEM matrix with plasma ashing. Consequently, superhydrophobic surface properties (water contact angle = 170°, sliding angle <1°) can be attained from the hierarchical nanoflake structure. The method presented here is advantageous in that large-scale preparation can be readily implemented by a stepwise dipping process without resorting to specific patterning or a serially applied complex structuring process, which can provide a promising platform technique for various surface engineering applications.

Anisotropic Diffusion of Polyelectrolyte Chains within Multilayer Films

We have found diffusion of polyelectrolyte chains within multilayer films to be highly anisotropic, with the preferential chain motion parallel to the substrate. The degree of anisotropy was quantified by a combination of fluorescence recovery after photobleaching and neutron reflectometry, probing chain diffusion in directions parallel and perpendicular to the substrate, respectively. Chain mobility was controlled by ionic strength of annealing solutions and steric hindrance to ionic pairing of interacting polyelectrolytes.

Layer-by-layer assembled polyaniline nanofiber/multiwall carbon nanotube thin film electrodes for high-power and high-energy storage applications

Thin film electrodes of polyaniline (PANi) nanofibers and functionalized multiwall carbon nanotubes (MWNTs) are created by layer-by-layer (LbL) assembly for microbatteries or -electrochemical capacitors. Highly stable cationic PANi nanofibers, synthesized from the rapid aqueous phase polymerization of aniline, are assembled with carboxylic acid functionalized MWNT into LbL films. The pH-dependent surface charge of PANi nanofibers and MWNTs allows the system to behave like weak polyelectrolytes with controllable LbL film thickness and morphology by varying the number of bilayers. The LbL-PANi/MWNT films consist of a nanoscale interpenetrating network structure with well developed nanopores that yield excellent electrochemical performance for energy storage applications. These LbL-PANi/MWNT films in lithium cell can store high volumetric capacitance (~238 ± 32 F/cm(3)) and high volumetric capacity (~210 mAh/cm(3)). In addition, rate-dependent galvanostatic tests show LbL-PANi/MWNT films can deliver both high power and high energy density (~220 Wh/L(electrode) at ~100 kW/L(electrode)) and could be promising positive electrode materials for thin film microbatteries or electrochemical capacitors.