Tunable electrochemical switch of the optical properties of metallic nanoparticles

Developing an Electrochemically Reversible Switch for Modulating the Optical Signal of Gold Nanoparticles

Gold nanoparticles (AuNPs) possess remarkable optical properties and electrical conductivity, making them highly relevant in various fields such as medical diagnoses, biological imaging, and electronic sensors. However, the existing methods for modulating the optical properties of AuNPs are often under limitations such as a high cost, the complexity of detection, a narrow range of application settings, and irreversibility. In this study, we propose a novel approach to address these challenges by constructing a reversible electrochemical switch. The switch (ITO-OMAD) involves covalently linking nitroxide radicals and AuNPs (AuNPs-NO•), followed by tethering this nanocomposite to a siloxane-derived indium tin oxide (ITO) electrode. By simply electrochemically oxidizing/reducing the nitroxide units, one is able to reversibly modulate the optical properties of AuNPs at will. The surface morphology and structure of the as-prepared ITO-OMAD electrode were characterized through scanning electron microscopy (SEM) and cyclic voltammetry (CV). SEM imaging confirmed the successful anchoring of AuNPs on the ITO electrode. Electrochemical tests performed in the three-electrode system demonstrated that the local surface plasmon resonance (LSPR) of AuNPs can be reversibly regulated by alternatively imposing ± 0.5V (vs. Ag/AgCl) to the modified electrode. The development of this electrochemical switch presents a novel approach to effectively control the optical properties of AuNPs. The further exploration and utilization of this reversible electrochemical switch could significantly enhance the versatility and practicality of AuNPs in numerous applications.

Advances in electrochromic device technology through the exploitation of nanophotonic and nanoplasmonic effects

Research regarding electrochromic (EC) materials, such materials that change their color upon application of an electrochemical stimulus, has been conducted for centuries. However, most recently, increasing efforts have been put into developing novel solutions to utilize these on-off switching materials in advanced nanoplasmonic and nanophotonic devices. Due to the significant change in dielectric properties of oxides such as WO₃, NiO, Mn₂O₃ and conducting polymers like PEDOT:PSS and PANI, EC materials have transcended beyond simple smart window applications and are now found in plasmonic devices for full-color displays and enhanced modulation transmission and photonic devices with ultra-high on-off ratios and sensing abilities. Advancements in nanophotonic ECDs have further decreased EC switching speed by several orders of magnitude, allowing integration in real-time measurement and lab-on-chip applications. The EC nature of such nanoscale devices promises low energy consumption with low operating voltages paired with bistability and long lifetimes. We summarize these novel approaches to EC device design, lay out the current short comings and draw a path forward for future utilization.

Molecular Plasmonics with Metamaterials

Molecular plasmonics, the area which deals with the interactions between surface plasmons and molecules, has received enormous interest in fundamental research and found numerous technological applications. Plasmonic metamaterials, which offer rich opportunities to control the light intensity, field polarization, and local density of electromagnetic states on subwavelength scales, provide a versatile platform to enhance and tune light-molecule interactions. A variety of applications, including spontaneous emission enhancement, optical modulation, optical sensing, and photoactuated nanochemistry, have been reported by exploiting molecular interactions with plasmonic metamaterials. In this paper, we provide a comprehensive overview of the developments of molecular plasmonics with metamaterials. After a brief introduction to the optical properties of plasmonic metamaterials and relevant fabrication approaches, we discuss light-molecule interactions in plasmonic metamaterials in both weak and strong coupling regimes. We then highlight the exploitation of molecules in metamaterials for applications ranging from emission control and optical modulation to optical sensing. The role of hot carriers generated in metamaterials for nanochemistry is also discussed. Perspectives on the future development of molecular plasmonics with metamaterials conclude the review. The use of molecules in combination with designer metamaterials provides a rich playground both to actively control metamaterials using molecular interactions and, in turn, to use metamaterials to control molecular processes.

A stable naked-eye colorimetric sensor for monitoring release of extracellular gamma-aminobutyric acid (GABA) neurotransmitter from SH-SY5Y cells

A novel optical γ-aminobutyric acid (GABA)-based sensor was developed on interacting thiol compounds and o-phthalaldehyde (OPA) to form thiacetal compounds. Then, the thiacetal interacts with the GABA molecule to form an isoindole compound. The effects of four thiol compounds on the stability of the resulting isoindole compound were assessed. The 2-mercaptoethanol, "one of the most used derivatizing agents," is unexpectedly the least stable; while, 16-mercaptohexadecanoic acid resulted in the most durable isoindole compound. The developed sensor showed the capability for detecting GABA within a wide concentration range spanning from 500 nmol L^-1 to 100 µmol L^-1. The detection limit was about 330 nmol L^-1, which indicated the high sensitivity of the developed sensor compared with those previously reported. The findings illustrated the ability to detect GABA at the physiological pH (pH = 7.4) without adjusting the pH value, opening the door for real applications. Furthermore, the sensor could detect various GABA concentrations in human serum with good recovery percentages (98% to 101.4%). In addition, this assay was applied to monitor GABA release from the SH-SY5Y cell line to convert glutamate into GABA. This result indicates the capability of the proposed assay for visually monitoring the release of GABA neurotransmitters.

Electrically switchable metallic polymer nanoantennas

[Figure: see text].

Electrochemical Switching of Plasmonic Colors Based on Polyaniline-Coated Plasmonic Nanocrystals

Plasmonic color generation has attracted much research interest because of the unique optical properties of plasmonic nanocrystals that are promising for chromatic applications, such as flat-panel displays, smart windows, and wearable devices. Low-cost, monodisperse plasmonic nanocrystals supporting strong localized surface plasmon resonances are favorable for the generation of plasmonic colors. However, many implementations so far have either a single static state or complexities in the particle alignment and switching mechanism for generating multiple displaying states. Herein, we report on a facile and robust approach for realizing the electrochemical switching of plasmonic colors out of colloidal plasmonic nanocrystals. The metal nanocrystals are coated with a layer of polyaniline, whose refractive index and optical absorption are reversibly switched through the variation of an applied electrochemical potential. The change in refractive index and optical absorption results in the modulation of the plasmonic scattering intensity with a depth of 11 dB. The electrochemical switching process is fast (∼5 ms) and stable (over 1000 switching cycles). A device configuration is further demonstrated for switching plasmonic color patterns in a transparent electrochemical device, which is made from indium tin oxide electrodes and a polyvinyl alcohol solid electrolyte. Our control of plasmonic colors provides a favorable platform for engineering low-cost and high-performance miniaturized optical devices.

Scalable electrochromic nanopixels using plasmonics

Plasmonic metasurfaces are a promising route for flat panel display applications due to their full color gamut and high spatial resolution. However, this plasmonic coloration cannot be readily tuned and requires expensive lithographic techniques. Here, we present scalable electrically driven color-changing metasurfaces constructed using a bottom-up solution process that controls the crucial plasmonic gaps and fills them with an active medium. Electrochromic nanoparticles are coated onto a metallic mirror, providing the smallest-area active plasmonic pixels to date. These nanopixels show strong scattering colors and are electrically tunable across >100-nm wavelength ranges. Their bistable behavior (with persistence times exceeding hundreds of seconds) and ultralow energy consumption (9 fJ per pixel) offer vivid, uniform, nonfading color that can be tuned at high refresh rates (>50 Hz) and optical contrast (>50%). These dynamics scale from the single nanoparticle level to multicentimeter scale films in subwavelength thickness devices, which are a hundredfold thinner than current displays.

Spectral Screening of the Energy of Hot Holes over a Particle Plasmon Resonance

Plasmonic hot carriers have been recently identified as key elements for photocatalysis at visible wavelengths. The possibility to transfer energy between metal plasmonic nanoparticles and nearby molecules depends not only on carrier generation and collection efficiencies but also on their energy at the metal-molecule interface. Here an energy screening study was performed by monitoring the aniline electro-polymerization reaction via an illuminated 80 nm gold nanoparticle. Our results show that plasmon excitation reduces the energy required to start the polymerization reaction as much as 0.24 eV. Three possible photocatalytic mechanisms were explored: the enhanced near field of the illuminated particle, the temperature increase at the metal-liquid interface, and the excited electron-hole pairs. This last phenomenon is found to be the one contributing most prominently to the observed energy reduction.

Active control of plasmonic colors: emerging display technologies

In recent years there has been a growing interest in the use of plasmonic nanostructures for color generation, a technology that dates back to ancient times. Plasmonic structural colors have several attractive features but once the structures are prepared the colors are normally fixed. Lately, several concepts have emerged for actively tuning the colors, which opens up for many new potential applications, the most obvious being novel color displays. In this review we summarize recent progress in active control of plasmonic colors and evaluate them with respect to performance criteria for color displays. It is suggested that actively controlled plasmonic colors are generally less interesting for emissive displays but could be useful for new types of electrochromic devices relying on ambient light (electronic paper). Furthermore, there are several other potential applications such as images to be revealed on demand and colorimetric sensors.

Monitoring plasmonic hot-carrier chemical reactions at the single particle level

Plasmon excitation in metal nanoparticles triggers the generation of highly energetic charge carriers that, when properly manipulated and exploited, can mediate chemical reactions. Single-particle techniques are key to unearthing the underlying mechanisms of hot-carrier generation, transport and injection, as well as to disentangling the role of the temperature increase and the enhanced near-field at the nanoparticle-molecule interface. Gaining nanoscopic insight into these processes and their interplay could aid in the rational design of plasmonic photocatalysts. Here, we present three different approaches to monitor hot-carrier reactivity at the single-particle level. We use a combination of dark-field microscopy and photoelectrochemistry to track a hot-hole driven reaction on a single Au nanoparticle. We image hot-electron reactivity with sub-particle spatial resolution using nanoscopy techniques. Finally, we push the limits by looking for a hot-electron induced chemical reaction that generates a fluorescent product, which should enable imaging plasmonic photocatalysis at the single-particle and single-molecule levels.

Electrical detection of plasmon-induced isomerization in molecule-nanoparticle network devices

We use a network of molecularly linked gold nanoparticles (NPSAN: nanoparticle self-assembled network) to demonstrate the electrical detection (conductance variation) of plasmon-induced isomerization (PII) of azobenzene derivatives (azobenzene bithiophene: AzBT). We show that PII is more efficient in a 3D-like NPSAN (cluster-NPSAN) than in a purely two-dimensional NPSAN (i.e., a monolayer of AzBT functionalized Au NPs). By comparison with the usual optical (UV-visible light) isomerization of AzBT, PII shows faster (a factor > ∼10) isomerization kinetics. Possible PII mechanisms are discussed: electric field-induced isomerization, two-phonon process, and plasmon-induced resonance energy transfer (PIRET), the latter being the most likely.

Advanced Plasmonic Materials for Dynamic Color Display

Plasmonic structures exhibit promising applications in high-resolution and durable color generation. Research on advanced hybrid plasmonic materials that allow dynamically reconfigurable color control has developed rapidly in recent years. Some of these results may give rise to practically applicable reflective displays in living colors with high performance and low power consumption. They will attract broad interest from display markets, compared with static plasmonic color printing, for example, in applications such as digital signage, full-color electronic paper, and electronic device screens. In this progress report, the most promising recent examples of utilizing advanced plasmonic materials for the realization of dynamic color display are highlighted and put into perspective. The performances, advantages, and disadvantages of different technologies are discussed, with emphasis placed on both the potential and possible limitations of various hybrid materials for dynamic plasmonic color display.

Analysis of the electron transfer properties of carbon quantum dots on gold nanorod surfaces via plasmonic resonance scattering spectroscopy

Carbon quantum dot wrapped gold nanorods were fabricated on an ITO electrode surface via electrostatic interactions. The electron transfer properties of carbon quantum dots on gold nanorod surfaces were systematically investigated by plasmonic resonance scattering spectroscopy.

Tailored Surfaces/Assemblies for Molecular Plasmonics and Plasmonic Molecular Electronics

Molecular plasmonics uses and explores molecule-plasmon interactions on metal nanostructures for spectroscopic, nanophotonic, and nanoelectronic devices. This review focuses on tailored surfaces/assemblies for molecular plasmonics and describes active molecular plasmonic devices in which functional molecules and polymers change their structural, electrical, and/or optical properties in response to external stimuli and that can dynamically tune the plasmonic properties. We also explore an emerging research field combining molecular plasmonics and molecular electronics.

Electrically Modulated Localized Surface Plasmon around Self-Assembled-Monolayer-Covered Nanoparticles

This article reports the observation of electrical modulation of localized surface plasmon around self-assembled monolayer (SAM)-modified gold nanoparticles and the establishment of a new spectroscopy technique, that is, dynamic electro-optical spectroscopy (DEOS). The gold nanoparticles are deposited onto a transparent conductive substrate, and an electrical bias applied on the conductive substrate can cause shift of resonance plasmon response, where the direction of peak shift is related to the polarity of applied bias. The peak shift observed at 2.4 V is approximately ten times larger than those reported in previous work. It is postulated that significant peak shift is the result of reorientation of adsorbed water on electrode, which can change local dielectric environment of nanoparticles. An energy barrier is identified when adsorbed water molecules are turned from oxygen-down to oxygen-up. Frequency-dependent peak shifts on surface-modified gold nanoparticles show that reorientation is a fast reversible process with rich dynamics.

Active Electrochemical Plasmonic Switching on Polyaniline-Coated Gold Nanocrystals

High-performance electrochemical plasmonic switching is realized on both single-particle and ensemble levels by coating polyaniline on colloidal gold nanocrystals through surfactant-assisted oxidative polymerization. Under small applied potentials, the core@shell nanostructures exhibit reversible plasmon shifts as large as 150 nm, a switching time of less than 10 ms, and a high switching stability.

Reducing the photocatalysis induced by hot electrons of plasmonic nanoparticles due to tradeoff of photothermal heating

The photothermal heating by the plasmonic nanoparticles lowers their photocatalytic efficiency due to the desperation of the reacting materials.

Silver Nanodisk Monolayers with Surface Coverage Gradients for Use as Optical Rulers and Protractors

Colloidal silver nanodisks (AgNDs) are assembled into a monolayer with a coverage density gradient (CDG) on the surface of flat and cylindrical substrates using the Langmuir-Blodgett (LB) technique. Compressing the LB monolayers during transfer to the substrates causes the CDG assembly of the AgNDs. By functionalizing the AgNDs with poly(ethylene glycol), it is possible to control their order inside the LB monolayer assembly by changing the deposition surface pressure. Well-separated AgNDs, 2D aggregates with different numbers of particles, and highly packed 2D arrays are formed as the deposition surface pressure is increased. Localized surface plasmon resonance (LSPR) spectra collected at different separation distances from the highest coverage spot (HCS) of the CDG AgND arrays on a flat substrate are blue-shifted, and the shift increases systematically upon increasing the distance. The relationship among the LSPR peak position, the peak intensity at a fixed wavelength, and the corresponding separation distance from the HCS is fitted exponentially. A similar systematic blue shift in the LSPR spectrum of the CDG AgND monolayer on a cylindrical substrate is obtained when the substrate is rotated at different angles relative to the HCS. The fabricated CDG AgND monolayers can potentially be used for optically measuring distances and angles.

Molecular Plasmonics

In this review, we survey recent advances in the field of molecular plasmonics beyond the traditional sensing modality. Molecular plasmonics is explored in the context of the complex interaction between plasmon resonances and molecules and the ability of molecules to support plasmons self-consistently. First, spectroscopic changes induced by the interaction between molecular and plasmonic resonances are discussed, followed by examples of how tuning molecular properties leads to active molecular plasmonic systems. Next, the role of the position and polarizability of a molecular adsorbate on surface-enhanced Raman scattering signals is examined experimentally and theoretically. Finally, we introduce recent research focused on using molecules as plasmonic materials. Each of these examples is intended to highlight the role of molecules as integral components in coupled molecule-plasmon systems, as well as to show the diversity of applications in molecular plasmonics.

Design of Hybrid Electrochromic Materials with Large Electrical Modulation of Plasmonic Resonances

We present a rational approach to fabricating plasmonically active hybrid polymer-metal nanomaterials with electrochemical tunability of the localized surface plasmon resonances (LSPRs) of noble metal nanostructures embedded in an electroactive polymer matrix. The key requirement for being able to significantly modulate the LSPR band position is a close overlap between the refractive index change [Δn(λ)] of a stimuli-responsive polymeric matrix and the intrinsic LSPR bands. For this purpose, gold nanorods with a controlled aspect ratio, synthesized to provide high refractive index sensitivity while maintaining good oxidative stability, were combined with a solution-processable electroactive and electrochromic polymer (ECP): alkoxy-substituted poly(3,4-propylenedioxythiophene) [PProDOT(CH2OEtHx)2]. Spectral characteristics of the ECP, in particular the Δn(λ) variation, were evaluated as the material was switched between oxidized and reduced states. We fabricated ultrathin plasmonic electrochromic hybrid films consisting of gold nanorods and ECP that exhibited a large, stable, and reversible LSPR modulation of up to 25-30 nm with an applied electrical potential. Finite-difference time-domain (FDTD) simulations confirm a good match between the experimentally measured refractive index change in the ECP and the plasmonic response during electrochemical modulations.

Optical monitoring of faradaic reaction using single plasmon-resonant nanorods functionalized with graphene

Real-time optical monitoring of the electron-transfer process was achieved and modulated on individual gold nanoparticles functionalized with graphene. We found that charge accumulation on single gold nanorods (GNRs) depends on the rate of Faradaic reaction, which is synchronized with double-layer charging.

Active methylenes in the synthesis of a pyrrole motif: an imperative structural unit of pharmaceuticals, natural products and optoelectronic materials

Pyrrole is one of the most important azaheterocycles, due to its wide range of applications in pharmaceuticals and optoelectronic materials, coupled with its utility as an intermediate in natural products.

Imaging electrocatalytic processes on single gold nanorods

Imaging electrochemical processes has attracted increasing attention in past decades. Particularly, monitoring electrochemical reactions rapidly at the nano-scale is still a challenge due to the ultra-low current detection and long scanning time required. The development of optical techniques provide a new way to demonstrate electrochemical processes through optical signals which enhance sensitivity and spatial resolution. Herein, we developed a novel method to image electrocatalytic processes on single gold nanorods (GNRs) during Cyclic Voltammetry (CV) scanning based on plasmon resonance scattering information by using dark-field microscopy. The electrocatalytic oxidation of hydrogen peroxide was selected as a typical reaction and the catalytic mechanism was revealed using the obtained spectra. Notably, observation on single GNRs avoided the averaging effects in bulk systems and confirmed that the individual nanoparticles had variable catalytic properties with different spectral change during the reaction process. Furthermore, a color-amplified system was introduced to convert light intensity into imaging information via the Matlab program which was able to image thousands of nanoparticles simultaneously. This approach offered the statistical intensity distribution of all of the nanoparticles in a dark-field image which dramatically enhanced the detection accuracy and avoided random events.

Highly Sensitive Electro-Plasmonic Switches Based on Fivefold Stellate Polyhedral Gold Nanoparticles

Electron-photon coupling in metal nanostructures has raised a new trend for active plasmonic switch devices in both fundamental understanding and technological applications. However, low sensitivity switches with an on/off ratio less than 5 have restricted applications. In this work, an electrically modulated plasmonic switch based on a surface-enhanced Raman spectroscopy (SERS) system with a single fivefold stellate polyhedral gold nanoparticle (FSPAuNP) is reported. The reversible switch of the SERS signal shows high sensitivity with an on/off ratio larger than 30. Such a high on/off ratio arises primarily from the plasmonic resonance shift of the FSPAuNP with the incident laser due to the altered free electron density on the nanoparticle under an applied electrochemical potential. This highly sensitive electro-plasmonic switch may enable further development of plasmonic devices.

Controllably tuning the near-infrared plasmonic modes of gold nanoplates for enhanced optical coherence imaging and photothermal therapy

Ozone can be used to precisely tailor the plasmon mode of gold triangular nanoprism for enhancing optical imaging and therapy.

Comparison of the plasmonic performances between lithographically fabricated and chemically grown gold nanorods

The plasmonic performances of lithographic and chemical gold nanorods are quantitatively examined and compared through both experiments and electrodynamic simulations.

Surface plasmon resonance properties of silver nanoparticle 2D sheets on metal gratings

Grating-coupled propagating surface plasmons associated with silver-nanoparticle 2D crystalline sheets exhibit sensitive plasmonic resonance tuning. Multilayered silver-nanoparticle 2D crystalline sheets are fabricated on gold or silver grating surfaces by the Langmuir- Blodgett method. We show that the deposition of Ag crystalline nanosheets on Au or Ag grating surfaces causes a drastic change in propagating surface plasmon resonance (SPR) both in angle measurements at fixed wavelengths and in fixed incident-angle mode by irradiation of white light. The dielectric constant of the multilayered silver nanosheet is estimated by a rigorous coupled-wave analysis. We find that the dielectric constant drastically increases as the number of silver-nanosheet layers increases. The experimentally obtained SP dispersions of Ag crystalline nanosheets on Au and Ag gratings are compared with the calculated SP dispersion curves. The drastic change in the surface plasmon resonance caused by the deposition of Ag-nanoparticle 2D crystalline sheets on metal grating surfaces suggests the potential for applications in highly sensitive sensors or for plasmonic devices requiring greatly enhanced electric fields.

(Gold nanorod core)/(polyaniline shell) plasmonic switches with large plasmon shifts and modulation depths

(Gold nanorod core)/(polyaniline shell) nanostructures are prepared for functioning as active plasmonic switches. The single core/shell nanostructures exhibit a remarkable switching performance, with the modulation depth and scattering peak shift reaching 10 dB and 100 nm, respectively. The nanostructures are also deposited on substrates to form macroscale monolayers with remarkable ensemble plasmonic switching performances.

Active Control of SPR by Thermoresponsive Hydrogels for Biosensor Applications

The use of thermoresponsive poly(N-isopropylacrylamide)-based hydrogel (pNIPAAm) for rapid tuning of surface plasmon resonance (SPR) is reported. This approach is implemented by using an SPR layer architecture with an embedded indium tin oxide microheater and pNIPAAm film on its top. It takes advantage of rapid thermally induced swelling and collapse of pNIPAAm that is accompanied by large refractive index changes and leads to high thermo-optical coefficient of dn/dT = 2 × 10-2 RIU/K. We show that this material is excellently suited for efficient control of refractive index-sensitive SPR and that it can serve simultaneously as a 3D binding matrix in biosensor applications (if modified with biomolecular recognition elements for a specific capture of target analyte). We demonstrate that this approach enables modulating of the output signal in surface plasmon-enhanced fluorescence spectroscopy biosensors and holds potential for simple time-multiplexing of sensing channels for parallelized readout of fluorescence assays.

Temperature-controlled electrochemical switch based on layered double hydroxide/poly(N-isopropylacrylamide) ultrathin films fabricated via layer-by-layer assembly

In this paper we report the fabrication of layered double hydroxide (LDH) nanoparticles/poly(N-isopropylacrylamide) (pNIPAM) ultrathin films (UTFs) via the layer-by-layer assembly technique, and their switchable electrocatalytic performance in response to temperature stimuli was demonstrated. X-ray diffraction and UV-vis absorption spectroscopy indicate a periodic layered structure with uniform and regular growth of the (LDH/pNIPAM)(n) UTFs; an interaction based on hydrogen bonding between LDH nanoparticles and pNIPAM was confirmed by X-ray-photoelectron spectroscopy and Fourier transform infrared spectroscopy. Temperature-triggered cyclic voltammetry and electrochemical impedance spectroscopy switch for the UTFs was obtained between 20 and 40 °C, accompanied by reversible changes in surface topography and film thickness revealed by atomic force microscopy and ellipsometry, respectively. The electrochemical on-off property of the temperature-controlled (LDH/pNIPAM)(n) UTFs originates from the contraction-expansion configuration of pNIPAM with low-high electrochemical impedance. In addition, a switchable electrocatalytic behavior of the (LDH/pNIPAM)(n) UTFs toward the oxidation of glucose was observed, resulting from the temperature-controlled charge transfer rate. Therefore, this work provides a facile approach for the design and fabrication of a well-ordered command interface with a temperature-sensitive property, which can be potentially applied in electrochemical sensors and switching.

Electrochemical fabrication of highly stable redox-active nanojunctions

Redox-gated molecular junctions were obtained starting with a relatively large gap between two electrodes, in the micrometer range, followed by electrochemical polymerization of aniline. Polyaniline (PANI) grows from the tip side until it bridges the two electrodes. The resulting junctions were characterized electrochemically by following the variation of the tip-substrate current as a function of the electrochemical gate potential for various bias voltages and by recording their I(V) characteristics. The two electrodes make contact through PANI wires, and microjunctions with conductances around 10(-3) S were obtained. On the basis of a similar setup, PANI nanojunctions with conductances between 10(-7) and 10(-8) S were made, where the current appears to be controlled by fewer than 10 oligoaniline strands. Despite the small number of strands connecting the two electrodes, the junctions are highly stable even when several successive potential sweeps are performed. Comparison of the conductance measured in the oxidized and reduced states leads to an on/off ratio of about 70-100, which is higher than that reported for a single aniline heptamer bridging two electrodes, highlighting the interest of connecting a few tens of molecules using the scanning electrochemical microscopy (SECM) configuration. In some cases, the switching of the PANI takes place in several individual conductance steps close to that obtained for a single oligoaniline. Finally, starting with a microjunction and mechanically withdrawing the tip shrinks it down to the nanometer scale and makes it possible to reach the regime where the conductance is controlled by a limited number of strands. This work presents an easy method for making redox-gated nanojunctions and for probing the conductance of a few oligoanilines despite an initially large tip-substrate gap.

Optical sensing with simultaneous electrochemical control in metal nanowire arrays

This work explores the alternative use of noble metal nanowire systems in large-scale array configurations to exploit both the nanowires' conductive nature and localized surface plasmon resonance (LSPR). The first known nanowire-based system has been constructed, with which optical signals are influenced by the simultaneous application of electrochemical potentials. Optical characterization of nanowire arrays was performed by measuring the bulk refractive index sensitivity and the limit of detection. The formation of an electrical double layer was controlled in NaCl solutions to study the effect of local refractive index changes on the spectral response. Resonance peak shifts of over 4 nm, a bulk refractive index sensitivity up to 115 nm/RIU and a limit of detection as low as 4.5 × 10(-4) RIU were obtained for gold nanowire arrays. Simulations with the Multiple Multipole Program (MMP) confirm such bulk refractive index sensitivities. Initial experiments demonstrated successful optical biosensing using a novel form of particle-based nanowire arrays. In addition, the formation of an ionic layer (Stern-layer) upon applying an electrochemical potential was also monitored by the shift of the plasmon resonance.

Electrochemistry on a localized surface plasmon resonance sensor

The optical signal of a localized surface plasmon resonance (LSPR)-based sensor combined with electrochemistry was investigated. Gold nanoparticles were immobilized on an indium tin oxide (ITO) substrate, which functioned as working electrode. Using cyclic voltammetry synchronized with LSPR sensing, surface reactions on gold were detected both electrically and optically. In the capacitive charging regime, optical signals linear to the applied potential were detected. Gold was found to be dissolved above the oxidation potential and partially redeposited during the reduction, which changed size and conformation of the gold nanoparticles. In kinetic measurements, slower potential establishment was observed at lower salt concentrations. Simulations by multiple multipole program (MMP) suggested the formation of a lossy layer by combination of charge depletion of gold and negative ion adsorption even below the reaction potential. We consider the results presented here of importance for any future sensors based on combined plasmonics and electrochemistry.

One dimensional assembly of Mn₆ single molecule magnets linked by oligothiophene bridges

A new 1D coordination polymer comprised of [Mn(III)(6)O(2)(Et-sao)(6)(EtOH)(4)(H(2)O)(2)](2+) units and bithiophene dicarboxylato was synthesized by mixing EtsaoH(2) (salicylaldoxime), H(2)btda (2,2'-bithiophene-5,5'-dicarboxylic acid) and Mn(ClO(4))(2)·6H(2)O in the presence of NEt(4)OH. The crystal structure was determined and consists of Mn(6) clusters bridged by the bithiophene dicarboxylato ligands coordinated to two of the Mn(III) ions of the Mn(6) polynuclear complex. Direct current magnetic measurements show an overall ferromagnetic interaction between the Mn(III) ions within the Mn(6) cluster leading to an S = 12 ground state for the Mn(6) unit. Furthermore, this compound presents single-molecule magnet behaviour. Slow relaxation of the magnetization is observed at low temperature following a thermal activated regime with U(eff) approximately 50 K and tau(0) approximately 2.2 10(-10) s. The magnetic measurements do not show any noticeable interaction between the Mn(6) clusters through the bithiophene dicarboxylato bridges.