Tailoring shear-stiff, mica-like nanoplatelets

Swelling of Ti3 C2 Tx MXene in Water and Methanol at Extreme Pressure Conditions

Pressure-induced swelling has been reported earlier for several hydrophilic layered materials. MXene Ti3C2Tx is also a hydrophilic layered material composed by 2D sheets but so far pressure-induced swelling is reported for this material only under conditions of shear stress at MPa pressures. Here, high-pressure experiments are performed with MXenes prepared by two methods known to provide "clay-like" materials. MXene synthesized by etching MAX phase with HCl+LiF demonstrates the effect of pressure-induced swelling at 0.2 GPa with the insertion of additional water layer. The transition is incomplete with two swollen phases (ambient with d(001) = 16.7Å and pressure-induced with d(001) = 19.2Å at 0.2 GPa) co-existing up to the pressure point of water solidification. Therefore, the swelling transition corresponds to change from two-layer water intercalation (2L-phase) to a never previously observed three-layer water intercalation (3L-phase) of MXene. Experiments with MXene prepared by LiCl+HF etching have not revealed pressure-induced swelling in liquid water. Both MXenes also show no anomalous compressibility in liquid methanol. The presence of pressure-induced swelling only in one of the MXenes indicates that the HCl+LiF synthesis method is likely to result in higher abundance of hydrophilic functional groups terminating 2D titanium carbide.

Simultaneous Enhancement of Lithium Transfer Kinetics and Structural Stability in Dual-Phase TiO2 Electrodes by Ruthenium Doping

Dual-phase TiO2 consisting of bronze and anatase phases is an attractive electrode material for fast-charging lithium-ion batteries due to the unique phase boundaries present. However, further enhancement of its lithium storage performance has been hindered by limited knowledge on the impact of cation doping as an efficient modification strategy. Here, the effects of Ru4+ doping on the dual-phase structure and the related lithium storage performance are demonstrated for the first time. Structural analysis reveals that an optimized doping ratio of Ru:Ti = 0.01:0.99 (1-RTO) is vital to maintain the dual-phase configuration because the further increment of Ru4+ fraction would compromise the crystallinity of the bronze phase. Various electrochemical tests and density functional theory calculations indicate that Ru4+ doping in 1-RTO enables more favorable lithium diffusion in the bulk for the bronze phase as compared to the undoped TiO2 (TO) counterpart, while lithium kinetics in the anatase phase are found to remain similar. Furthermore, Ru4+ doping leads to a better cycling stability for 1-RTO-based electrodes with a capacity retention of 82.1% after 1200 cycles at 8 C as compared to only 56.1% for TO-based electrodes. In situ X-ray diffraction reveals a reduced phase separation in the lithiated anatase phase, which is thought to stabilize the dual-phase architecture during extended cycling. The simultaneous enhancement of rate ability and cycling stability of dual-phase TiO2 enabled by Ru4+ doping provides a new strategy toward fast-charging lithium-ion batteries.

Intercalation of CO2 Selected by Type of Interlayer Cation in Dried Synthetic Hectorite

Clay minerals are abundant in caprock formations for anthropogenic storage sites for CO₂, and they are potential capture materials for CO₂ postcombustion sequestration. We investigate the response to CO₂ exposure of dried fluorohectorite clay intercalated with Li⁺, Na⁺, Cs⁺, Ca²⁺, and Ba²⁺. By in situ powder X-ray diffraction, we demonstrate that fluorohectorite with Na⁺, Cs⁺, Ca²⁺, or Ba²⁺ does not swell in response to CO₂ and that Li-fluorohectorite does swell. A linear uptake response is observed for Li-fluorohectorite by gravimetric adsorption, and we relate the adsorption to tightly bound residual water, which exposes adsorption sites within the interlayer. The experimental results are supported by DFT calculations.

Delamination by Repulsive Osmotic Swelling of Synthetic Na-Hectorite with Variable Charge in Binary Dimethyl Sulfoxide-Water Mixtures

Swelling of clays is hampered by increasing layer charge. With vermiculite-type layer charge densities, crystalline swelling is limited to the two-layer hydrate, while osmotic swelling requires ion exchange with bulky and hydrophilic organic molecules or with Li⁺ cations to trigger repulsive osmotic swelling. Here, we report on surprising and counterintuitive osmotic swelling behavior of a vermiculite-type synthetic clay [Na_0.7]^inter[Mg_2.3Li_0.7]^oct[Si₄]^tetO₁₀F₂ in mixtures of water and dimethyl sulfoxide (DMSO). Although swelling in pure water is restricted to crystalline swelling, with the addition of DMSO, osmotic swelling sets in at some threshold composition. Finally, when the DMSO concentration is increased further to 75 vol %, swelling is restricted again to crystalline swelling as expected. Repulsive osmotic swelling thus is observed in a narrow composition range of the binary water-DMSO mixture, where a freezing point suppression is observed. This suppression is related to DMSO and water molecules exhibiting strong interactions leading to stable molecular clusters. Based on this phenomenological observation, we hypothesize that the unexpected swelling behavior might be related to the formation of different complexes of interlayer cations being formed at different compositions. Powder X-ray diffraction and ²³Na magic angle spinning-NMR evidence is presented that supports this hypothesis. We propose that the synergistic solvation of the interlayer sodium at favorable compositions exerts a steric pressure by the complexes formed in the interlayer. Concomitantly, the basal spacing is increased to a level, where entropic contributions of interlayer species lead to a spontaneous thermodynamically allowed one-dimensional dissolution of the clay stack.

Clay-Based Polymer Nanocomposites: Essential Work of Fracture

This work details the general structure of the clays used as a reinforcement phase in polymer nanocomposites. Clays are formed by the molecular arrangement of atomic planes described through diagrams to improve their visualization. The molecular knowledge of clays can facilitate the selection of the polymer matrix and achieve a suitable process to obtain clay-based polymer nanocomposite systems. This work highlights the development of polymer nanocomposites using the melt intercalation method. The essential work of fracture (EWF) technique has been used to characterize the fracture behavior of materials that show ductility and where complete yielding of the ligament region occurs before the crack propagation. In this sense, the EWF technique characterizes the post-yielding fracture mechanics, determining two parameters: the specific essential work of fracture (we), related to the surface where the actual fracture process occurs, and the specific non-essential work of fracture (wp), related to the plastic work carried out in the outer zone of the fracture zone. The EWF technique has been used successfully in nano-reinforced polymers to study the influence of different variables on fracture behavior. In this work, the fundamentals of the EWF technique are described, and some examples of its application are compiled, presenting a summary of the most relevant contributions in recent years.

Osmotic Delamination: A Forceless Alternative for the Production of Nanosheets Now in Highly Polar and Aprotic Solvents

Repulsive osmotic delamination is thermodynamically allowed "dissolution" of two-dimensional (2D) materials and therefore represents an attractive alternative to liquid-phase exfoliation to obtain strictly monolayered nanosheets with an appreciable aspect ratio with quantitative yield. However, osmotic delamination was so far restricted to aqueous media, severely limiting the range of accessible 2D materials. Alkali-metal intercalation compounds of MoS₂ or graphite are excluded because they cannot tolerate even traces of water. We now succeeded in extending osmotic delamination to polar and aprotic organic solvents. Upon complexation of interlayer cations of synthetic hectorite clay by crown ethers, either 15-crown-5 or 18-crown-6, steric pressure is exerted, which helps in reaching the threshold separation required to trigger osmotic delamination based on translational entropy. This way, complete delamination in water-free solvents like aprotic ethylene and propylene carbonate, N-methylformamide, N-methylacetamide, and glycerol carbonate was achieved.

Influence of Particle Size on Toughening Mechanisms of Layered Silicates in CFRP

Carbon-fiber-reinforced epoxies are frequently used for lightweight applications that require high mechanical properties. Still, there is potential regarding the improvement of the interlaminar-fracture toughness. As matrix toughening with nanoparticles is one possibility, in this study two different layered silicates are used to reinforce carbon fiber composites. The first type is a synthetical K-Hectorite (K-Hect) with outstanding lateral extension (6 µm) that has shown high toughening ability in resins in previous work. The other is a commercial montmorillonite (MMT) with a smaller size (400 nm). The aim of this study is to show the influence of the particles on mode I and mode II fracture toughness, especially the influence of particle size. Therefore, double-cantilever-beam tests and end-notched-flexure tests were carried out. Additionally, the fracture mechanisms were investigated via scanning electron microscopy (SEM). It is concluded, that the larger Hectorite particles are beneficial for mode I fracture behavior because of enhanced toughening mechanisms. One the other hand, the mode II energy dissipation rate is increased by the smaller montmorillonite particles due to sufficient interaction with the formation of hackling structures.

Osmotic Swelling of Sodium Hectorite in Ternary Solvent Mixtures: Nematic Liquid Crystals in Hydrophobic Media

The swelling of clay minerals in organic solvents or solvent mixtures is key for the fabrication of polymer nanocomposites with perfectly dispersed filler that contain only individual clay layers. Here, we investigated the swelling behavior of sodium hectorite in different ternary solvent mixtures containing methanol, acetonitrile, ethylene glycol, or glycerol carbonate with minimal amounts of water. We found that in these mixtures, less water is required than in the corresponding binary mixtures to allow for complete delamination by repulsive osmotic swelling. A quantitative study of osmotic swelling in a particular ternary mixture shows that organic solvents resemble swelling behavior in pure water. At hectorite contents larger than 5 vol %, the separation of individual layers scales with ϕ^-1. At this concentration, a crossover is observed and swelling continues at a slower pace (ϕ^-0.5) below this value.

SiC-fixed organophilic montmorillonite hybrids for poly(phenylene sulfide) composites with enhanced oxidation resistance

SiC-fixed organophilic montmorillonite hybrids exhibited improved dispersion and excellent antioxidant ability in a poly(phenylene sulfide) matrix.

Controlled Exfoliation of Layered Silicate Heterostructures into Bilayers and Their Conversion into Giant Janus Platelets

Ordered heterostructures of layered materials where interlayers with different reactivities strictly alternate in stacks offer predetermined slippage planes that provide a precise route for the preparation of bilayer materials. We use this route for the synthesis of a novel type of reinforced layered silicate bilayer that is 15 % stiffer than the corresponding monolayer. Furthermore, we will demonstrate that triggering cleavage of bilayers by osmotic swelling gives access to a generic toolbox for an asymmetrical modification of the two vis-à-vis standing basal planes of monolayers. Only two simple steps applying arbitrary commercial polycations are needed to obtain such Janus-type monolayers. The generic synthesis route will be applicable to many other layered compounds capable of osmotic swelling, rendering this approach interesting for a variety of materials and applications.

Preparation and characterization of poly (phenylene sulfide) nanocomposites with both silica and clay fillers

Poly (phenylene sulfide) (PPS)/silica (SiO2)/organophilic montmorillonite OMMT(clay) nanocomposites are prepared and two kinds of nanofillers of different dimensions, the plate-like OMMT(clay) and globe-like SiO2, are dispersed through their “filler–filler” interaction in melt processing. In PPS/SiO2/clay system, strong filler–filler interaction is established by different responses to shear flow of inorganic clay and SiO2, thus the well dispersion of nanofillers is achieved successfully. However, the OMMT platelets are prone to be entangled by PPS molecular chains in PPS/SiO2/OMMT composites due to the extremely low interfacial tension between PPS and OMMT, which blocks the interaction between OMMT and SiO2. The result reveals two key points in realizing well dispersion of nanofillers in polymer by establishing filler–filler interaction in processing, namely, the distinct responses to shear flow of nanofillers provide an important condition for filler–filler interaction, while the direct collision between each other is another key point to successfully realize this interaction.

Graphene oxide hydration and solvation: an in situ neutron reflectivity study

Graphene oxide membranes were recently suggested for applications in separation of ethanol from water using a vapor permeation method. Using isotope contrast, neutron reflectivity was applied to evaluate the amounts of solvents intercalated into a membrane from pure and binary vapors and to evaluate the selectivity of the membrane permeation. Particularly, the effect of D2O, ethanol and D2O-ethanol vapours on graphene oxide (GO) thin films (∼25 nm) was studied. The interlayer spacing of GO and the amount of intercalated solvents were evaluated simultaneously as a function of vapour exposure duration. The significant difference in neutron scattering length density between D2O and ethanol allows distinguishing insertion of each component of the binary mixture into the GO structure. The amount of intercalated solvent at saturation corresponds to 1.4 molecules per formula unit for pure D2O (∼1.4 monolayers) and 0.45 molecules per formula unit (one monolayer) for pure ethanol. This amount is in addition to H2O absorbed at ambient humidity. Exposure of the GO film to ethanol-D2O vapours results in intercalation of GO with both solvents even for high ethanol concentration. A mixed D2O-ethanol layer inserted into the GO structure is water enriched compared to the composition of vapours due to slower ethanol diffusion into GO interlayers.

Hydration of bilayered graphene oxide

The hydration of graphene oxide (GO) membranes is the key to understand their remarkable selectivity in permeation of water molecules and humidity-dependent gas separation. We investigated the hydration of single GO layers as a function of humidity using scanning force microscopy, and we determined the single interlayer distance from the step height of a single GO layer on top of one or two GO layers. This interlayer distance grows gradually by approximately 1 Å upon a relative humidity (RH) increase in the range of 2 to ∼80%, and the immersion into liquid water increases the interlayer distance further by another 3 Å. The gradual expansion of the single interlayer distance is in good agreement with the averaged distance measured by X-ray diffraction on multilayered graphite oxides, which is commonly explained with an interstratification model. However, our experimental design excludes effects connected to interstratification. Instead we determine directly if insertion of water into GO occurs strictly by monolayers or the thickness of GO layers changes gradually. We find that hydration with up to 80% RH is a continuous process of incorporation of water molecules into single GO layers, while liquid water inserts as monolayers. The similarity of hydration for our bilayer and previously reported multilayered materials implies GO few and even bilayers to be suitable for selective water transport.

The structure of graphene oxide membranes in liquid water, ethanol and water-ethanol mixtures

The structure of graphene oxide (GO) membranes was studied in situ in liquid solvents using synchrotron radiation X-ray diffraction in a broad temperature interval. GO membranes are hydrated by water similarly to precursor graphite oxide powders but intercalation of alcohols is strongly hindered, which explains why the GO membranes are permeated by water and not by ethanol. Insertion of ethanol into the membrane structure is limited to only one monolayer in the whole studied temperature range, in contrast to precursor graphite oxide powders, which are intercalated with up to two ethanol monolayers (Brodie) and four ethanol monolayers (Hummers). As a result, GO membranes demonstrate the absence of "negative thermal expansion" and phase transitions connected to insertion/de-insertion of alcohols upon temperature variations reported earlier for graphite oxide powders. Therefore, GO membranes are a distinct type of material with unique solvation properties compared to parent graphite oxides even if they are composed of the same graphene oxide flakes.

In-plane modulus of singular 2:1 clay lamellae applying a simple wrinkling technique

Knowledge of the mechanical properties of singular clay lamellae is of crucial importance for the optimization of clay-polymer nanocomposites. On the basis of controlled stress release, singular 2:1 clay lamellae show regular wrinkles on a deformable substrate. A subsequent two-dimensional Fourier transformation gives an in-plane modulus of the clay lamella of approximately 150 GPa. Only readily-available topographical atomic force microscopy is required for analysis rendering that fast and facile procedure generally applicable for nanoplatelet characterization.

Clay-based nanocomposite coating for flexible optoelectronics applying commercial polymers

Transparency, flexibility, and especially ultralow oxygen (OTR) and water vapor (WVTR) transmission rates are the key issues to be addressed for packaging of flexible organic photovoltaics and organic light-emitting diodes. Concomitant optimization of all essential features is still a big challenge. Here we present a thin (1.5 μm), highly transparent, and at the same time flexible nanocomposite coating with an exceptionally low OTR and WVTR (1.0 × 10(-2) cm(3) m(-2) day(-1) bar(-1) and <0.05 g m(-2) day(-1) at 50% RH, respectively). A commercially available polyurethane (Desmodur N 3600 and Desmophen 670 BA, Bayer MaterialScience AG) was filled with a delaminated synthetic layered silicate exhibiting huge aspect ratios of about 25,000. Functional films were prepared by simple doctor-blading a suspension of the matrix and the organophilized clay. This preparation procedure is technically benign, is easy to scale up, and may readily be applied for encapsulation of sensitive flexible electronics.

Nanoplatelets of sodium hectorite showing aspect ratios of ≈20,000 and superior purity

Applying a combination of melt synthesis followed by long-term annealing a fluorohectorite is obtained which is unique with respect to homogeneity, purity, and particle size. Counterintuitively, the hectorite undergoes a disorder-to-order transition upon swelling to the level of the bilayer hydrate. Alkylammonium-exchanged samples show at any chain length only a single basal spacing corroborating a nicely homogeneous layer charge density. Its intracrystalline reactivity improves greatly upon annealing, making it capable to spontaneously and completely disintegrate into single clay lamellae of 1 nm thickness. Realizing exceptional aspect ratios of around 20,000 upon delamination, this synthetic clay will offer unprecedented potential as functional filler in highly transparent nanocomposites with superior gas barrier and mechanical properties.

How to maximize the aspect ratio of clay nanoplatelets

Melt-synthesis yielded lithium-fluorohectorites (Li-hect(x)) with variable layer charge (x = 0.4, 0.6, 0.8, 1.0). Counterintuitively, both tactoid diameter and intracrystalline reactivity increased concomitantly with increasing layer charge. This way hectorites with very large diameters were obtained (d(50%) = 48 μm) that nevertheless still spontaneously delaminate when immersed into water and nano-platelets with huge aspect ratios (>10 000) are formed. Melt-synthesis of Li-hect(x) has been performed in an open glassy carbon crucible allowing for easy scaling to batches of 500 g. These unprecedented huge aspect ratio fillers promise great potential for flame retardants and barrier applications.

UV-cured, flexible, and transparent nanocomposite coating with remarkable oxygen barrier

A polymer-layered silicate nanocomposite coating is prepared by combining a novel synthetic lithium-hectorite and an UV-curable, cationic polyurethane. Oxygen transmission measurements clearly indicate the supremacy of the lithium-hectorite as compared to a standard montmorillonite. In addition, a very high degree of optical transparency of the nanocomposite coating is achieved, rendering this material highly interesting for flexible packaging and encapsulation applications.

Homogeneous precipitation by formamide hydrolysis: synthesis, reversible hydration, and aqueous exfoliation of the layered double hydroxide (LDH) of Ni and Al

Homogenous precipitation by formamide hydrolysis results in the formation of a formate-intercalated layered double hydroxide (LDH) of Ni(II) and Al(III). The formate-LDH is sensitive to the atmospheric humidity and reversibly exchanges its intercalated water with atmospheric moisture. The hydration/dehydration cycle is complete within a narrow range of 0-30% relative humidity with significant hysteresis and involves a randomly interstratified intermediate phase. When immersed in water, the formate ion grows its hydration sphere (osmotic swelling), eventually leading to the exfoliation of the metal hydroxide layers into lamellar particles having in-plane dimensions of 100-200 nm and a thickness of 9-12 nm. These nanoplatelets restack to thicker tactoids again upon evaporation of the dispersion. The intercalated formate ion can be exchanged with nitrate ions in solution but not with iodide ions. These observations have implications for many applications of LDHs in the area of carbon dioxide sorption and catalysis.