Reactive probes for ratiometric detection of Co2+ and Cu+ based on excited-state intramolecular proton transfer mechanism

Fluorescent response mechanism based on ESIPT and TICT of novel probe H2QJI: A TD-DFT investigation

Recently, synthesized N-linked-disalicylaldehyde H2QJI probes have been used to detect heavy metal ions in the experiment conveniently. Nevertheless, there needs to be a more in-depth examination of the excited state intramolecular proton transfer (ESIPT) mechanism and photophysical properties of the probe. This work remedied it based on quantum chemistry calculations. We contained due hydrogen bond (O1-H2 ⋯ N3 and O4-H5 ⋯ O6) and then analyzed bond parameters, IR vibration spectra, and non-covalent interaction. The bond strength is enhanced under photoexcitation, and the former is significantly stronger. The calculated electron spectra are in agreement with the experimental values. The results of the S0 and S1 potential energy curves and IRC calculations also confirm the unique ESIPT behavior, which isan excited stated stepwise double proton transfer. The fluorescence, internal conversion, and intersystem crossing rate of KD molecules (twisted-, double proton transfer) were calculated respectively to reveal the radiative and non-radiative pathways. It proved that the corresponding spectra are not obtained since the electrons are mainly deactivated by the ISC (S1->T1). Furthermore, the interfragment charge transfer (IFCT) approach indicates that the molecule possesses twisted intramolecular charge transfer (TICT) characteristics, which lead to the quenching of fluorescence introduction.

Wavelength specific aggregation induced emission in aqueous media permits selective detection of Ag+ and Hg2+ ions

A new 1,8-naphthalimide derivative (probe 1) adopts V-shaped structure, emits fluorescence and displays the Mie effect and aggregation-induced emission (AIE). Selective interactions of thiophilic Ag+ and Hg2+ ions (10 µM) with 1 (10 µM) resulted in AIEs at 499 and 521 nm, respectively. Both Ag+ and Hg2+ induce the formation of 1:2 complexes with 1, leading to the formation of AIE active aggregates with an average size of 423 and 198 nm, respectively. The formation of crystalline needles with Ag+ and spherical aggregates with Hg2+ results in wavelength specific AIE that permits the naked-eye and fluorometric detection of Ag+ and Hg2+ ions. Probe 1 shows excellent selectivity toward Ag+ and Hg2+ among various metal ions, therefore, 1 is suitable for the selective and quantitative detection of Ag+ and Hg2+ ions. Job plots are used for the determination of the stoichiometry of the complexes formed. It is evident from the fluorescence images of probe 1 in Rhizoctonia oryzae mycelia cells that they can be employed as potential candidates for in-vitro bioimaging.

Hydrogen-Bonded Thiol Undergoes Unconventional Excited-State Intramolecular Proton-Transfer Reactions

The chapter on the thiol-related hydrogen bond (H-bond) and its excited-state intramolecular proton-transfer (ESIPT) reaction was recently opened where compound 4'-diethylamino-3-mercaptoflavone (3NTF) undergoes ESIPT in both cyclohexane solution and solid, giving a 710 nm tautomer emission with an anomalously large Stokes shift of 12,230 cm-1. Considering the thiol H-bond to be unconventional compared to the conventional Pauling-type -OH or -NH H-bond, it is thus essential and timely to probe its fundamental difference between their ESIPT. However, thiol-associated ESIPT tends to be nonemissive due to the dominant nπ* character of the tautomeric lowest excited state. Herein, based on the 3-mercaptoflavone scaffold and π-elongation concept, a new series of 4'-substituted-7-diethylamino-3-mercaptoflavones, NTFs, was designed and synthesized with varied H-bond strength and 690-720 nm tautomeric emission upon ultraviolet (UV) excitation in cyclohexane. The order of their H-bonding strength was experimentally determined to be N-NTF < O-NTF < H-NTF < F-NTF, while the rate of -SH ESIPT measured by fluorescence upconversion was F-NTF (398 fs)-1 < H-NTF (232 fs)-1 < O-NTF (123 fs)-1 < N-NTF (101 fs)-1 in toluene. Unexpectedly, the strongest H-bonded F-NTF gives the slowest ESIPT, which does not conform to the traditional ESIPT model. The results are rationalized by the trend of carbonyl oxygen basicity rather than -SH acidity. Namely, the thiol acidity relevant to the H-bond strength plays a minor role in the driving force of ESIPT. Instead, the proton-accepting strength governs ESIPT. That is to say, the noncanonical thiol H-bonding system undergoes an unconventional type of ESIPT.

Aggregation-induced Emission Active Naphthalimide Derived Schiff Base for Detecting Cu2+ and Its Applications

Herein, an aggregation-induced emission (AIE) active Schiff base (NHS) was synthesized by condensing naphthalimide hydrazide with salicylaldehyde. The non-fluorescent solution of NHS in DMSO turned to emissive NHS upon increasing the HEPES fraction in DMSO from 70 to 95%. The UV-Vis absorption and DLS studies supported the self-aggregation of NHS that restricted the intramolecular rotation and activated the ESIPT process. The blue fluorescence of AIE luminogen NHS in DMSO:HEPES (5:95, v/v, pH = 7.4) was examined by adding different metal ions (Al3+, Ca2+, Cd2+, Co2+, Cu2+, Cr2+, Fe2+, Fe3+, Hg2+, Mg2+, Mn2+, Ni2+, Pb2+ and Zn2+). NHS showed a selective fluorescence switch-off response for Cu2+ due to the chelation enhancement quenching effect (CHEQ). The quenching of NHS by Cu2+ was explored by using density functional theory (DFT) and Stern-Volmer plot. The practical utility of NHS was examined by quantitative and qualitative analysis of Cu2+ in real water samples.

An activity-based fluorescent sensor with a penta-coordinate N-donor binding site detects Cu ions in living systems

An activity-based sensor afforded a 63 times fluorescence-enhancement with Cu2+/Cu+ ions and could image Cu2+/Cu+ in living cells and in a multicellular organism. The sensor functioned only in the presence of ambient dioxygen and glutathione, and the characterization of intermediates and products hinted toward a sensing mechanism involving a CuII hydroperoxo species.

Dye-surfactant co-assembly as the chromogenic indicator for nanomolar level detection of Cu(I) ions via a color-changing response

Polyaromatic amphiphilic probes have been developed, that can be involved in chromogenic detection of Cu⁺ ions in anionic micelles. A rapid change in solution color from yellow to orange was observed in the presence of Cu⁺ ions. The detection limit was found at the nanomolar range. To the best of our knowledge, this is the first report of the visible detection of Cu⁺ ions in aqueous medium using anionic micelles as a stabilizing agent. Interestingly, the compound can also detect Cu⁺ ions, generated in situ from physiological redox processes. The mechanistic investigation suggests that the probe molecule forms a diamagnetic tetrahedral complex with the Cu⁺ ion, coordinating through a pyridyl ketone unit. In addition, we have also followed the interaction with Cu⁺ on a bilayer surface made of anionic phospholipids. Further, a Cu²⁺-probe ensemble is used to assay the reducing ability of different biogenic thiols depending upon the pK_a of their sulfhydryl (-SH) group. This allows us to determine the amount of reducing thiols present in human urine samples. Considering the high sensitivity of the present system, we screened water samples collected from different natural sources for Cu⁺ ions. Nearly 100% recovery values with considerably small relative standard deviations (<5%) indicate that the present system is indeed suitable for real-life sample analysis. Finally, low-cost, reusable, chemically-modified paper strips have been developed for rapid, on-location detection of Cu⁺ ions.

Multi-responsive paper chemosensors based on mesoporous silica nanospheres for quantitative sensing of heavy metals in water

Exposure to low concentrations of heavy metal cations seriously harms living organisms, hence they are considered environmental toxins. Portable simple detection systems are required for field monitoring of multiple metal ions. In this report, paper-based chemosensors (PBCs) were prepared by adsorbing 1-(pyridin-2-yl diazenyl) naphthalen-2-ol (chromophore), which recognizes heavy metals, onto filter papers coated with mesoporous silica nano spheres (MSNs). The high density of the chromophore probe on the surface of PBCs resulted in ultra-sensitive optical detection of heavy metal ions and short response time. The concentration of metal ions was determined using digital image-based colorimetric analysis (DICA) and compared to spectrophotometry under optimal sensing conditions. The PBCs exhibited stability and short recovery times. The detection limits determined using DICA of Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ were 0.22, 0.28, 0.44, and 0.54 μM; respectively. Additionally, the linear ranges for monitoring Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ were 0.44-4.4, 0.16-4.2, 0.8-8.5, and 0.002-5.2 μM; respectively. The developed chemosensors showed high stability, selectivity, and sensitivity for sensing of Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ in water under optimum conditions and hold potential for low cost, onsite sensing of toxic metals in water.

Advances in reaction-based synthetic fluorescent probes for studying the role of zinc and copper ions in living systems

Recently, the behavior of essential trace metal elements in living organisms has attracted more and more attention as their dynamics have been found to be tightly regulated by metallothionines, transporters, etc. As the physiological and/or pathological roles of such metal elements are critical, there have been many non-invasive methods developed to determine their cellular functions, mainly by small molecule fluorescent probes. In this review, we focus on probes that detect intracellular zinc and monovalent copper. Both zinc and copper act not only as tightly bound cofactors of enzymes and proteins but also as signaling factors as labile or loosely bound species. Many fluorescent probes that detect mobile zinc or monovalent copper are recognition-based probes, whose detection is hindered by the abundance of intracellular chelators such as glutathione which interfere with the interaction between probe and metal. In contrast, reaction-based probes release fluorophores triggered by zinc or copper and avoid interference from such intracellular chelators, allowing the detection of even low concentrations of such metals. Here, we summarize the current status of the cumulative effort to develop such reaction-based probes and discuss the strategies adopted to overcome their shortcomings.

Multipronged diagnostic and therapeutic strategies for Alzheimer's disease

Alzheimer's disease (AD) is a progressive neurodegenerative disorder and a major contributor to dementia cases worldwide. AD is clinically characterized by learning, memory, and cognitive deficits. The accumulation of extracellular amyloid β (Aβ) plaques and neurofibrillary tangles (NFTs) of tau are the pathological hallmarks of AD and are explored as targets for clinical diagnosis and therapy. AD pathology is poorly understood and there are no fully approved diagnosis and treatments. Notwithstanding the gap, decades of research in understanding disease mechanisms have revealed the multifactorial nature of AD. As a result, multipronged and holistic approaches are pertinent to targeting multiple biomarkers and targets for developing effective diagnosis and therapeutics. In this perspective, recent developments in Aβ and tau targeted diagnostic and therapeutic tools are discussed. Novel indirect, combination, and circulating biomarkers as potential diagnostic targets are highlighted. We underline the importance of multiplexing and multimodal detection of multiple biomarkers to generate biomarker fingerprints as a reliable diagnostic strategy. The classical therapeutics targeting Aβ and tau aggregation pathways are described with bottlenecks in the strategy. Drug discovery efforts targeting multifaceted toxicity involving protein aggregation, metal toxicity, oxidative stress, mitochondrial damage, and neuroinflammation are highlighted. Recent efforts focused on multipronged strategies to rationally design multifunctional modulators targeting multiple pathological factors are presented as future drug development strategies to discover potential therapeutics for AD.

Rationally Designed Molecules Synergistically Modulate Multifaceted Aβ Toxicity, Microglial Activation, and Neuroinflammation

Synergistic modulation of multifaceted toxicity is the key to tackle multifactorial Alzheimer's disease (AD). The etiology of AD includes amyloid β (Aβ) amyloidosis, metal ion dyshomeostasis, reactive oxygen species (ROS), oxidative stress, mitochondrial damage, and neuroinflammation. We rationally designed multifunctional modulators by integrating pharmacophores for metal chelation, antioxidant and anti-inflammatory properties, and modulation of Aβ42 aggregation on the naphthalene monoimide (NMI) scaffold. The in vitro and cellular studies of NMIs revealed that M3 synergistically modulates metal-independent and -dependent amyloid toxicity, scavenges ROS, alleviates oxidative stress, and emulates Nrf2-mediated stress response in neuronal cells. M3 effectively reduced structural and functional damage of mitochondria, reduced Cyt c levels, and rescued cells from apoptosis. The biological atomic force microscopy and Western blot analysis revealed the ability of M3 to suppress microglial activation and neuroinflammation through inhibition of the NF-κβ pathway. The synergistic action of M3 is in agreement with our design strategy to develop a multifunctional therapeutic candidate by integrating multiple pharmacophores with distinct structural and functional elements to ameliorate the multifaceted toxicity of AD.

A new diformyl phenol based chemosensor selectively detects Zn2+ and Co2+ in the nanomolar range in 100% aqueous medium and HCT live cells

A new diformyl phenol based chemosensor that can sense Zn2+ and Co2+ in the nanomolar range in 100% aqueous solution and in HCT cells was explored.

Chapter Open for the Excited-State Intramolecular Thiol Proton Transfer in the Room-Temperature Solution

We report here, for the first time, the experimental observation on the excited-state intramolecular proton transfer (ESIPT) reaction of the thiol proton in room-temperature solution. This phenomenon is demonstrated by a derivative of 3-thiolflavone (3TF), namely, 2-(4-(diethylamino)phenyl)-3-mercapto-4H-chromen-4-one (3NTF), which possesses an -S-H···O═ intramolecular H-bond (denoted by the dashed line) and has an S₁ absorption at 383 nm. Upon photoexcitation, 3NTF exhibits a distinctly red emission maximized at 710 nm in cyclohexane with an anomalously large Stokes shift of 12 230 cm^-1. Upon methylation on the thiol group, 3MeNTF, lacking the thiol proton, exhibits a normal Stokes-shifted emission at 472 nm. These, in combination with the computational approaches, lead to the conclusion of thiol-type ESIPT unambiguously. Further time-resolved study renders an unresolvable (<180 fs) ESIPT rate for 3NTF, followed by a tautomer emission lifetime of 120 ps. In sharp contrast to 3NTF, both 3TF and 3-mercapto-2-(4-(trifluoromethyl)phenyl)-4H-chromen-4-one (3FTF) are non-emissive. Detailed computational approaches indicate that all studied thiols undergo thermally favorable ESIPT. However, once forming the proton-transferred tautomer, the lone-pair electrons on the sulfur atom brings non-negligible nπ* contribution to the S₁' state (prime indicates the proton-transferred tautomer), for which the relaxation is dominated by the non-radiative deactivation. For 3NTF, the extension of π-electron delocalization by the diethylamino electron-donating group endows the S₁' state primarily in the ππ* configuration, exhibiting the prominent tautomer emission. The results open a new chapter in the field of ESIPT, covering the non-canonical sulfur intramolecular H-bond and its associated ESIPT at ambient temperature.

A selective and sensitive near-infrared fluorescent probe for real-time detection of Cu(i)

The disruption of copper homeostasis (Cu+/Cu2+) may cause neurodegenerative disorders. Thus, the need for understanding the role of Cu+ in physiological and pathological processes prompted the development of improved methods of Cu+ analysis. Herein, a new near-infrared (NIR) fluorescent turn-on probe (NPCu) for the detection of Cu+ was developed based on a Cu+-mediated benzylic ether bond cleavage mechanism. The probe showed high selectivity and sensitivity toward Cu+, and was successfully applied for bioimaging of Cu+ in living cells.

A Diverse Micromorphology of Photonic Crystal Chips for Multianalyte Sensing

The diversity by nano/microstructural material or device constructing can provide the exciting opportunity for sensitivity and selectivity to achieve facile and efficient multianalyte recognition for clinical diagnosis, environment monitoring, etc., in complex system analysis. Colloidal poly(styrene-methyl methacrylate-acrylic acid) (poly(St-MMA-AA)) nanoparticle-assembled photonic crystals (PCs) can achieve manipulative 3D structural colors and approach PC sensor chip for high-efficient multianalysis utilizing simple dye. Focusing on the morphology effects of structural color, a PC microchip is designed and constructed with various geometrical micromorphologies. Based on the angle dependence of colloidal-crystal structural color, the stopband distribution is explored on various morphological PC pixels. Selective fluorescent enhancement is realized for stopband-matched PCs, which approach the successful discrimination of metal ions and complex multianalysis of groundwater. Meanwhile, printed droplet-shaping manipulation can achieve a large-scale structural-color sensor array of chips with designable nano/microstructures via colloidal assembly. It will be the critical puzzle piece between macromorphology and microstructure for the structural-color researches.

A new highly selective colorimetric Schiff base chemosensor for determining the copper content in artisanal cachaças

This work demonstrated the feasibility of applying the Schiff base 5-bromo-2-salicyl-beta-alanine as a colorimetric chemosensor for the spectrophotometric quantification of the copper content in artisanal cachaças. For this, the experimental conditions were optimized to obtain an efficient, sensitive, reversible, and highly selective chemosensor to Cu²⁺ ions. The complex stoichiometry was 1:1, with a formation constant of 5.82 × 10² L mol^-1 and molar absorptivity of 5.82 × 10³ mol L^-1 cm^-1. Then, a spectrophotometric analytical method was developed and validated according to the Brazilian legislation. The linearity of the analytical curve was demonstrated by ANOVA, at a confidence level of 95%. The limits of detection and quantification were 0.0659 and 0.200 mg L^-1, respectively. The coefficients of variation for both the intra- and inter-day precisions were lower than 3.83%, and the accuracy presented a mean recovery of 100.55 ± 2.87%. The absence of a matrix effect was confirmed by the standard addition method, and the copper content in three artisanal cachaças from different geographical origins was estimated as lower than 2.93 mg L^-1. This result was in accordance with the Brazilian legislation but reinforces the need to carry out stricter quality control to achieve exportation standards. Therefore, the proposed method can be considered a simple, selective, linear, precise, and accurate tool that involves only a simple complexation reaction through the addition of the chemosensor solution in a buffered medium. As a consequence, the simplicity, practicality, rapidity, and low cost of synthesis of the proposed Schiff base chemosensor are highlighted.

Developing a new chemosensor targeting zinc ion based on two types of quinoline platform

A chemosensor DQ (2-(2-(quinolin-2-yl)hydrazinyl)-N-(quinolin-8-yl)acetamide), based on two quinoline moieties, has been synthesized. DQ could detect zinc ion through fluorescence turn-on in aqueous media. Limit of detection was calculated as 0.07 μM, far lower than the standard of WHO for zinc ion. The practicality of DQ was demonstrated via the successful results of reusability with EDTA, easy detection on the test strip, and precise quantification in real water samples. Additionally, sensor DQ could be applied to bioimaging of zinc ion in zebrafish. Sensing process of zinc ion by DQ was studied through fluorescence and UV-Vis spectroscopy, ¹H NMR titration, and ESI-mass spectrometry.

Activity-Based Sensing with a Metal-Directed Acyl Imidazole Strategy Reveals Cell Type-Dependent Pools of Labile Brain Copper

Copper is a required nutrient for life and particularly important to the brain and central nervous system. Indeed, copper redox activity is essential to maintaining normal physiological responses spanning neural signaling to metabolism, but at the same time copper misregulation is associated with inflammation and neurodegeneration. As such, chemical probes that can track dynamic changes in copper with spatial resolution, especially in loosely bound, labile forms, are valuable tools to identify and characterize its contributions to healthy and disease states. In this report, we present an activity-based sensing (ABS) strategy for copper detection in live cells that preserves spatial information by a copper-dependent bioconjugation reaction. Specifically, we designed copper-directed acyl imidazole dyes that operate through copper-mediated activation of acyl imidazole electrophiles for subsequent labeling of proximal proteins at sites of elevated labile copper to provide a permanent stain that resists washing and fixation. To showcase the utility of this new ABS platform, we sought to characterize labile copper pools in the three main cell types in the brain: neurons, astrocytes, and microglia. Exposure of each of these cell types to physiologically relevant stimuli shows distinct changes in labile copper pools. Neurons display translocation of labile copper from somatic cell bodies to peripheral processes upon activation, whereas astrocytes and microglia exhibit global decreases and increases in intracellular labile copper pools, respectively, after exposure to inflammatory stimuli. This work provides foundational information on cell type-dependent homeostasis of copper, an essential metal in the brain, as well as a starting point for the design of new activity-based probes for metals and other dynamic signaling and stress analytes in biology.

Construction of Chiral "Triple-Decker" Nd(III) Nanocluster with High NIR Luminescence Sensitivity toward Co(II)

One Nd(III) complex [Nd₃L₃(OAc)₃] (1) was synthesized from a conjugate Schiff base ligand H₂L. It shows a chiral "triple-decker" structure (1.1 × 1.2 × 1.8 nm) with Nd(III) ions sandwiched between the Schiff base ligands. 1 exhibits NIR Nd(III) luminescence, and the LMET efficiency is calculated to be 13.8%. It displays high luminescence sensitivity and selectivity to Co(II). The K_SV value and LOD of 1 to Co(II) are 9.96 × 10⁴ M^-1 and 0.97 μM, respectively.

Unambiguous Detection of Elevated Levels of Hypochlorous Acid in Double Transgenic AD Mouse Brain

Alzheimer's disease (AD) is one of the most prevalent forms of dementia. The current diagnosis methods based on the behavior and cognitive decline or imaging of core biomarkers, namely, amyloid-β (Aβ) plaques and neurofibrillary tangles (NFTs), in the brain offer poor to moderate success. Detection and imaging of biomarkers that cause additional traits of pathophysiological aberrations in the brain are invaluable to monitor early disease onset and progression of AD pathology. The pathological hallmark of AD is associated with generation of excessive reactive oxygen species (ROS) in the brain, which aggravate oxidative stress and inflammation. ROS production involves elevated levels of hypochlorous acid (HOCl) and can serve as one of the potential biomarkers for the diagnosis of AD. We report the design, synthesis, and characterization of switchable coumarin-morpholine (CM) conjugates as off-on fluorescence probes for the specific detection of HOCl produced and proximally localized with amyloid plaques. The nonfluorescent thioamide probe CM2 undergoes regioselective transformation to fluorescent amide probe CM1 in the presence of HOCl (∼90-fold fluorescence enhancement and 0.32 quantum yield) with high selectivity and sensitivity (detection limit: 0.17 μM). The excellent cellular uptake and blood-brain barrier (BBB) crossing ability of CM2 allowed unambiguous and differential detection, imaging, and quantification of HOCl in cellular milieu and in the wild type (WT) and AD mouse brains. This study demonstrates the elevated level of HOCl in the AD mouse brain and the potential to expand the repertoire of biomarkers for the diagnosis of AD.

Chelation of specific metal ions imparts coplanarity and fluorescence in two imidazo[1,2-a]pyridine derivatives: Potential chemosensors for detection of metal ions in aqueous and biosamples

Synthesis and chelation induced fluorescence emission from two imidazo[1,2-a]pyridine derivatives are described. The nonfluorescent molecule 1 containing N and O donor atoms, achieves coplanarity upon interactions with trivalent cations Al³⁺, Fe³⁺ and Cr³⁺, that favors fluorescence emission. Molecule 2 containing two N donor atoms attains coplanarity upon interaction with the only Zn²⁺ and becomes fluorescent. Both molecules 1 and 2 form a 1:1 complex with interacting metal ions. Other trivalent metal ions (including Bi³⁺ and In³⁺) and common divalent metal ions (including Hg²⁺ and Cd²⁺) fail to form any complex with 1 or 2, and they do not interfere in the detection of Zn²⁺, Al³⁺, Fe³⁺ or Cr³⁺ ions. Noninterference of other metal ions renders 1 and 2 suitable for the detection of fungal cells contaminated with Zn²⁺, Al³⁺, Fe³⁺ or Cr³⁺ ions.

Inorganic Chemistry Approaches to Activity-Based Sensing: From Metal Sensors to Bioorthogonal Metal Chemistry

The complex network of chemical processes that sustain life motivates the development of new synthetic tools to decipher biological mechanisms of action at a molecular level. In this context, fluorescent and related optical probes have emerged as useful chemical reagents for monitoring small-molecule and metal signals in biological systems, enabling visualization of dynamic cellular events with spatial and temporal resolution. In particular, metals occupy a central role in this field as analytes in their own right, while also being leveraged for their unique biocompatible reactivity with small-molecule substrates. This Viewpoint highlights the use of inorganic chemistry principles to develop activity-based sensing platforms mediated by metal reactivity, spanning indicators for metal detection to metal-based reagents for bioorthogonal tracking, and manipulation of small and large biomolecules, illustrating the privileged roles of metals at the interface of chemistry and biology.

Fluorescence Emission of Polyethylenimine-Derived Polymer Dots and Its Application to Detect Copper and Hypochlorite Ions

Polymer dots with nonconjugated groups that are facile to synthesize and environmentally friendly generally attract substantial interest. However, their fluorescence-emitting mechanisms are not clear. In this paper, nonconjugated polymer dots (N-PDs) are synthesized by amidation reaction between polyethylenimine (PEI) and citric acid (CA), then self-assemble into rice-like dots in aqueous phase with a high fluorescence quantum yield. Such nitrogen-containing nonconjugated compounds N-PDs are believed to be inherently fluorescent, and the reported reasons for fluorescence-emitting are discussed. Importantly, these N-PDs can be used as an excellent fluorescent probe to detect Cu²⁺ and ClO^- in aqueous solutions. Cu²⁺ could combine with the PEI moiety of the N-PDs to form a copper amine complex and then quench the fluorescence by an internal filtration effect. ClO^- could oxidize the hydroxyl groups on the surface of the N-PDs to form a positive charge, blocking electron transfer between the hydroxyl groups and the chromophore groups. Finally, the sensor was successfully applied to the detection of Cu²⁺ and ClO^- in environmental water samples.

A HBT-based bifunctional fluorescent probe for the ratiometric detection of fluoride and sulphite in real samples

Based on a core of 2-(benzo[d]thiazol-2-yl)phenol (HBT), a bifunctional ratiometric fluorescent probe, HBT-FS, was constructed for the discriminative detection of fluoride (F^-) and sulphite (SO₃^2-) with high sensitivity and selectivity. HBT-FS itself displayed a green fluorescence with λ_Em^max = 498 nm. The treatment of HBT-FS with F^- resulted in a red fluorescence (λ_Em^max = 634 nm) with a large Stokes shift and a 291-fold enhancement in the ratio of the fluorescence intensity (I_{634 nm}/I_{498 nm}). Upon the addition of SO₃^2-, HBT-FS exhibited a blue fluorescence (λ_Em^max = 371 nm) and the ratiometric fluorescence enhancement was remarkable (9445 folds for I_{371 nm}/I_{498 nm}). HBT-FS was successfully used to qualitatively and quantitatively determine F^- and SO₃^2- in a ratiometric manner in real samples.

Highly Sensitive Dansyl-Based Chemosensor for Detection of Cu2+ in Aqueous Solution and Zebrafish

A new dansyl-based chemosensor (2-(4-((5-(dimethylamino)naphthalen-1-yl)sulfonyl)piperazin-1-yl)-N-(quinolin-8-yl)acetamide) (DC) for detecting Cu2+ was synthesized and characterized. DC showed great selectivity to Cu2+ by a fluorescent "on-off" detection method. Job plot, ESI-mass spectroscopy, and 1H NMR titration suggested a 1 to 1 binding mode between DC and Cu2+. The detection limit was determined to be 43 nM, which is greatly below the WHO guidelines. In addition, DC can be applied to real samples and zebrafish imaging. The fluorescence quenching mechanism was proposed as the enhancement of intramolecular charge transfer with calculations.

Star-Shaped ESIPT-Active Mechanoresponsive Luminescent AIEgen and Its On-Off-On Emissive Response to Cu2+/S2

Design and development of multifunctional materials have drawn incredible attraction in recent years. Herein, we report the design and construction of versatile star-shaped intramolecular charge transfer (ICT)-coupled excited-state intramolecular proton transfer (ESIPT)-active mechanoresponsive and aggregation-induced emissive (AIE) luminogen triaminoguanidine-diethylaminophenol (LH3 ) conjugate from simple precursors triaminoguanidine hydrochloride and 4-(N,N-diethylamino)salicylaldehyde. Solvent-dependent dual emission in nonpolar to polar protic solvents implies the presence of ICT-coupled ESIPT features in the excited state. Aggregation-enhanced emissive feature of LH3 was established in the CH3CN/water mixture. Furthermore, this compound exhibits mechanochromic fluorescence behavior upon external grinding. Fluorescence microscopy images of pristine, crystal, and crushed crystals confirm the naked-eye mechanoresponsive characteristics of LH3 . In addition, LH3 selectively sensed a Cu2+ ion through a colorimetric and fluorescence "turn-off" route, and subsequently, the LH3 -Cu2+ ensemble could act as a selective and sensitive sensor for S2- in a "turn-on" fluorescence manner via a metal displacement approach. Reversible "turn-off-turn-on" features of LH3 with Cu2+/S2- ions were efficiently demonstrated to construct the IMPLICATION logic gate function. The Cu2+/S2--responsive sensing behavior of LH3 was established in the paper strip experiment also, which can easily be characterized by the naked eye under daylight as well as a UV lamp (λ = 365 nm).

Synthesis of Fluorescent 1,7-Dipyridyl-bis-pyrazolo[3,4-b:4',3'-e]pyridines: Design of Reversible Chemosensors for Nanomolar Detection of Cu2

An efficient access toward novel tridentate ligands based on 1,7-dipyridinyl-substituted bis-pyrazolo[3,4-b:4',3'-e]pyridines (BPs) and their usefulness as fluorescent probes for cation detection is reported. The synthesis proceeds by a three-step sequence starting from 2-chloropyridine (1), all reactions were performed using microwave radiation under solvent-free conditions, and an overall yield of up to 63% was obtained. Photophysical properties of three representative 1,7-dipyridinyl-BPs (PBPs, 6a-6c) substituted at position 4 with different donor (D) or acceptor (A) groups were investigated. Compounds exhibited large Stokes shift in different solvents and strong blue light emission in both solution and solid state, and quantum yields were as high as 88% for some of them; thus, a twisted intramolecular charge transfer (TICT) fluorescence mechanism characteristic of the 1,4,7-triaryl-BPs was confirmed. The 4-phenyl-substituted probe (Ph-PBP, 6b) was used successfully in the detection of some metals (Cu2+, Co2+, Ni2+, and Hg2+) by fluorescence quenching phenomena, which could be reversed in the presence of ethylenediamine. This probe showed a greater sensitivity toward Cu2+ in concentrations as low as 26 nM, and in the process of "on-off-on" for this fluorescent molecular switch, only 1 equiv of the analyte was used.

Multitasking behaviour of a small organic compound: solid state bright white-light emission, mechanochromism and ratiometric sensing of Al(iii) and pyrophosphate

Solid state bright white-light emission, mechanochromism and ratiometric fluorescence sensing of Al³⁺ and pyrophosphate by a single organic molecule are demonstrated.

Applications of Nanomaterials Based on Magnetite and Mesoporous Silica on the Selective Detection of Zinc Ion in Live Cell Imaging

Functionalized magnetite nanoparticles (FMNPs) and functionalized mesoporous silica nanoparticles (FMSNs) were synthesized by the conjugation of magnetite and mesoporous silica with the small and fluorogenic benzothiazole ligand, that is, 2(2-hydroxyphenyl)benzothiazole (hpbtz). The synthesized fluorescent nanoparticles were characterized by FTIR, XRD, XRF, ¹³C CP MAS NMR, BET, and TEM. The photophysical behavior of FMNPs and FMSNs in ethanol was studied using fluorescence spectroscopy. The modification of magnetite and silica scaffolds with the highly fluorescent benzothiazole ligand enabled the nanoparticles to be used as selective and sensitive optical probes for zinc ion detection. Moreover, the presence of hpbtz in FMNPs and FMSNs induced efficient cell viability and zinc ion uptake, with desirable signaling in the normal human kidney epithelial (Hek293) cell line. The significant viability of FMNPs and FMSNs (80% and 92%, respectively) indicates a potential applicability of these nanoparticles as in vitro imaging agents. The calculated limit of detections (LODs) were found to be 2.53 × 10⁻⁶ and 2.55 × 10⁻⁶ M for Fe₃O₄-H@hpbtz and MSN-Et₃N-IPTMS-hpbtz-f1, respectively. FMSNs showed more pronounced zinc signaling relative to FMNPs, as a result of the more efficient penetration into the cells.

Glutathione-driven Cu(i)-O2 chemistry: a new light-up fluorescent assay for intracellular glutathione

Besides its widely known role as an endogenous antioxidant in scavenging free radicals, glutathione (GSH) can also play the role of prooxidant and promote CuO-induced formation of hydroxyl radicals to light up a fluorescent signal through Cu(i)-O2 chemistry without requiring additional H2O2. This approach is independent of the mechanisms of enzyme mimics, such as the well-known oxidase and peroxidase mimetics, providing a new method to simply and effectively analyze intracellular GSH.

In Vivo Bioluminescence Imaging of Cobalt Accumulation in a Mouse Model

As a trace element nutrient, cobalt is critical for both prokaryotes and eukaryotes. In the current study, a turn-on Cobalt Bioluminescent Probe 1 (CBP-1) for the detection of cobalt has been successfully developed based on oxidative C-O bond cleavage. This probe exhibited high selectivity and sensitivity toward cobalt over other analytes. By using CBP-1, the successful in vivo imaging of cobalt accumulation was carried out in a mouse model. Such an ability to determine cobalt in living animals provides a powerful technology for studying the system distribution, toxic potency, and biological effect of Co²⁺.

A new Schiff-base chemosensor for selective detection of Cu2+ and Co2+ and its copper complex for colorimetric sensing of S2- in aqueous solution

A new Schiff-base colorimetric chemosensor 1 was developed for the detection of Cu²⁺, Co²⁺ and S^2-. Sensor 1 could simply monitor Cu²⁺ and Co²⁺ by a color change from colorless to yellow. The binding modes of 1 to Cu²⁺ and Co²⁺ were determined to be a 2 : 1 complexation stoichiometry through Job's plot and ESI-mass spectrometry analysis. The detection limits (0.02 μM and 0.63 μM) for Cu²⁺ and Co²⁺ were lower than the recommended values (31.5 μM and 1.7 μM) by the World Health Organization (WHO) for Cu²⁺ and the Environmental Protection Agency (EPA) for Co²⁺, respectively. Importantly, 1 could detect and quantify Cu²⁺ in real water samples. In addition, the Cu²⁺-2·1 complex could be used as a highly selective colorimetric sensor for S^2- in the presence of other anions without any interference. Moreover, the sensing mechanisms of Cu²⁺ and Co²⁺ by 1 were explained by theoretical calculations.

A simple fluorescent probe for the fast sequential detection of copper and biothiols based on a benzothiazole derivative

A simple benzothiazole fluorescent chemosensor was developed for the fast sequential detection of Cu²⁺ and biothiols through modulating the excited-state intramolecular proton transfer (ESIPT) process. The compound 1 exhibits highly selective and sensitive fluorescence "on-off" recognition to Cu²⁺ with a 1:1 binding stoichiometry by ESIPT hinder. The in situ generated 1-Cu²⁺ complex can serve as an "on-off" fluorescent probe for high selectivity toward biothiols via Cu²⁺ displacement approach, which exerts ESIPT recovery. It is worth pointing out that the 1-Cu²⁺ complex shows faster for cysteins (within 1min) than other biothiols such as homocysteine (25min) and glutathione (25min). Moreover, the compound 1 displays 160nm Stoke-shift for reversibly monitoring Cu²⁺ and biothiols. In addition, the probe is successfully used for fluorescent cellular imaging. This strategy via modulation the ESIPT state has been used for determination of Cu²⁺ and Cys with satisfactory results, which further demonstrates its value of practical applications.

Excited-state intramolecular proton-transfer (ESIPT) based fluorescence sensors and imaging agents

We review recent advances in the design and application of excited-state intramolecular proton-transfer (ESIPT) based fluorescent probes. These sensors and imaging agents (probes) are important in biology, physiology, pharmacology, and environmental science.