Colorimetric and luminescent sensors for chloride: hydrogen bonding vs deprotonation

Squaramide-based receptors in anion supramolecular chemistry: insights into anion binding, sensing, transport and extraction

Over the last 15 years, squaramide-based receptors have attracted the attention of supramolecular chemists working in the field of anion recognition. Herein, we highlight examples of squaramide-based receptors that are able to bind, sense, extract and transport anions.

Anion-Binding Properties of Aliphatic Symmetric Squaramide Receptors

Squaramides (SQs), which are very popular for their H-bonding ability, have attracted great interest due to their wide range of applications such as asymmetric synthesis, pharmacology, and anion transportation. In this study, aliphatic symmetric SQs based on cis/trans-1,2-diaminocyclohexane (DACH) substituted with cyclic tertiary amines, synthesized in four steps under simple reaction conditions, were investigated for the first time for their ability to bind Cl-, Br-, and I- anions. The changes in cis/trans geometric isomers and the cyclic ring (pyrrolidine vs piperidine) were found to have a combined effect on the degree of anion binding. The spectroscopic titrations of the SQs with TBA-Cl, TBA-Br, and TBA-I in the range of 0.2 to 20.0 equiv were monitored by 1H NMR, and the analyses of the magnitude of chemical shift differences in the NH peaks of the SQs in course of titration were performed by DynaFit and BindFit programs for the calculation of their Ka values. All symmetric SQs I-IV were found to selectively bind Cl- anion more strongly than Br- anion to varying degrees depending on the SQ derivatives. Especially, SQ IV, which has a symmetric trans-DACH and a pyrrolidine ring, was found to have the highest Cl- anion-binding ability compared to the other SQs. However, the SQs did not show any change in the chemical shift of the NH proton in 1H NMR upon successive addition of TBA-I, indicating that they do not interact with I- anion. The stoichiometries of the complexation behavior of SQs I-IV toward Cl- and Br- anions were also analyzed by Job plots.

Solvent-Dependent Conformational Switching of N-Methyl-N,N'-diarylsquaramide

N,N'-Diarylsquaramide and N,N'-dialkylsquaramide are conformationally stable linkers with extended (trans, trans) and folded (cis, cis) structures, respectively, independently of external conditions. Here, we show that N-monomethylated N,N'-diarylsquaramides generally take a (trans, cis) structure in the crystal but show a solvent-dependent conformational equilibrium in solution. In particular, the stable conformer of N-methyl-N,N'-bis(1-naphthyl)squaramide (1f) changes depending upon the solvent. Thus, aromatic N-monomethylated squaramides could find application as components of environment-responsive molecular switches.

Head vs. Tail Squaramide–Naphthalimide Conjugates: Self-Assembly and Anion Binding Behaviour

The syntheses of two squaramide–naphthalimide conjugates (SN1 and SN2) are reported; the structures of SN1 and SN2 differ by the attachment of a squaramide—either at the ‘head’ or the ‘tail’ of the naphthalimide fluorophore. Both compounds displayed weak fluorescence due to the inclusion of a nitro-aromatic squaramide which efficiently quenches the emission of the naphthalimide. Both compounds were also shown to undergo self-aggregation as studied by 1H NMR and scanning electron microscopy (SEM). Furthermore, SN1 and SN2 gave rise to stark colourimetric changes in response to basic anions such as AcO−, SO42− HPO42−, and F−. The observed colour changes are thought to be due to deprotonation of a squaramide NH. The same basic anions also result in a further quenching of the naphthalimide emission. No colour change or emission modulations were observed in the presence of Cl−; however, 1H NMR studies suggest that moderate H-bonding occurs between this anion and both SN1 and SN2.

Anion-Induced Reversible Actuation of Squaramide-Crosslinked Polymer Gels

Supramolecular anion binding to squaramide crosslinkers in poly(N,N-dimethylacrylamide) gel networks enhances swelling and allows reversible chemically driven actuation. The volume swelling ratio of the gels is shown to depend on both the type of anion and its concentration. ¹H NMR and UV-vis titrations with the squaramide crosslinkers reveal a relationship between anion binding affinity and the concentration-dependent swelling behavior. Gel swelling is shown to be reversible, and by embedding a solid support into rod-shaped gels, soft actuators are fabricated that undergo forward and backward bending motion in response to changing anion concentration. The swelling and bending process, which is accompanied by intense green coloration of the gel, is achieved by using only low amounts of crosslinker. This macroscopic actuation achieved by anion binding to specific molecular entities in the polymer network will open new opportunities in the field of chemically responsive materials.

Amidosquaramides - a new anion binding motif with pH sensitive anion transport properties

Stimuli responsive anion transport is becoming an important aspect of supramolecular anion recognition chemistry. Herein, we report the synthesis of a family of anion receptors that incorporate a new anion binding motif, amidosquaramides. We show using experimental and computational methods that these receptors have pK_a values close to physiological pH but also display intramolecular H-bonding interactions that affect anion recognition. Moreover, moderate activity in a Cl^-/NO₃^- exchange assay is observed at physiological pH that can be effectively 'switched on' when repeated under acidic conditions. The reported findings provide synthetic methods that can be used for the construction of more complex squaramide based anion receptors and also provide insight into the importance of conformational analysis when considering receptor design.

Fluorescence Recognition of Anions Using a Heteroditopic Receptor: Homogenous and Two-Phase Sensing

In contrast to monotopic receptor 3, the anthracene functionalized squaramide dual-host receptor 1 is capable of selectively extracting sulfate salts, as was evidenced unambiguously by DOSY, mass spectrometry, fluorescent and ion chromatography measurements. The receptors were investigated in terms of anion and ion pair binding using the UV-vis and 1H NMR titrations method in acetonitrile. The reference anion receptor 3, lacking a crown ether unit, was found to lose the enhancement in anion binding induced by the presence of cations. Besides the ability to bind anions in an enhanced manner exhibited by ion pair receptors 2 and 4, changing the 1-aminoanthracene substituent resulted in their exhibiting a lower anion affinity than receptor 1. By using receptor 1 and adjusting the water content in organic phase it was possible to selectively detect sulfates both by "turn-off" and "turn-on" fluorescence, and to do so homogenously and under interfacial conditions. Such properties of receptor 1 have allowed the development of a new type of sensor capable of recognizing and extracting potassium sulfate from the aqueous medium across a phase boundary, resulting in an appropriate fluorescent response in the organic solution.

Squaramide-Based Self-Associating Amphiphiles for Anion Recognition

The synthesis and characterisation of two novel self-assembled amphiphiles (SSAs) SQS-1 and SQS-2 are reported. Both compounds, based on the squaramide motif, were fully soluble in a range of solvents and were shown to undergo self-assembly through a range of physical techniques. Self-assembly was shown to favour the formation of crystalline domains on the nanoscale but also fibrillar film formation, as suggested by SEM analysis. Moreover, both SQS-1 and SQS-2 were capable of anion recognition in DMSO solution as demonstrated using 1 H NMR and UV/Vis absorption spectroscopy, but displayed lower binding affinities for various anions when compared against other squaramide based receptors. In more competitive solvent mixtures SQS-1 gave rise to a colourimetric response in the presence of HPO42- that was clearly visible to the naked eye. We anticipate that the observed response is due to the basic nature of the HPO42- anion when compared against other biologically relevant anions.

The design of anion-π interactions and hydrogen bonds for the recognition of chloride, bromide and nitrate anions

The role of anions in several biochemical processes has given rise to enormous interest in the identification/exploration of compounds with the potential ability to recognize anions. Here, an anthracene-squaramide conjugated compound, O2C4[NH(C14H10)][(NH(C6H6)], has been modified through the substitutions (i) H → F and (ii) H → OH at the anthracene and benzene rings to improve the capabilities of these structures for recognizing chloride, bromide, and nitrate anions. Through an energy decomposition analysis method, the recognition of the anions is chiefly identified as a non-covalent process. H → F substitutions at the benzene ring and, principally, the anthracene ring favor anion recognition, since H → F substitutions create a π-acid region in the aromatic ring, as indicated based on the molecular electrostatic potential surfaces. Similarly, H → OH substitutions also improve the recognition of anions, which is related to the establishment of partly covalent chemical bonds of the form O-H(Cl-, Br- and O-), which are verified based on the quantitative analysis of the maximum and minimum values of the molecular electrostatic potential surfaces and the quantum theory of atoms in molecules method. The presence of large electron density has a key role in the recognition of Cl- anions, and the more favorable electrostatic interactions between the anthracene structure and Br- anions, relative to NO3- anions, mean that receptorBr- interactions are more attractive than receptorNO3- ones. These data can contribute to the design of structures with the relevant abilities to interact with anions.

Macrocyclic squaramides as ion pair receptors and fluorescent sensors selective towards sulfates

Through the high dilution technique, we obtained macrocyclic ion pair receptors R1 and R2, an anion receptor R3, and a fluorescent sensor R4 using a combination of particular members of simple libraries consisting of synthesized diamines and methyl squarates, respectively. The receptors were investigated in terms of anion and ion pair binding using the ¹H NMR titration method in DMSO-d₆. We found that the major contribution to the anion binding comes from the interaction with the squaramide protons rather than with the amide functions of the receptors. The receptors demonstrated the highest affinity towards benzoates and sulfates over the anions tested, and in the case of sulfate binding more complex equilibria in solution were observed. Unlike the anion receptor R3, the ion pair receptor R1 was found to recognize anions in an enhanced manner with the assistance of sodium or potassium cations. Tethering of a simple fluorophore in close proximity to the amide function of receptor R4 resulted in an optical ion pair sensor selective towards sulfates. DFT calculations carried out for the 1 : 1 complexes of R3 with the anions helped clarify this selectivity, showing more effective participation of tetrahedral sulfate anions in binding with the amide function than in the case of benzoates or chlorides.

Switching-On Fluorescence by Copper (II) and Basic Anions: A Case Study with a Pyrene-Functionalized Squaramide

The new symmetric acyclic N,N’-bis(1-pyrenyl) squaramide (H₂L) functionalized with the pyrene moiety as a fluorogenic fragment has been designed and its ability to selectively detect specific anions and metals investigated. H₂L selectively binds Cl⁻ both in solution (DMSO 0.5% H₂O and MeCN) and in the solid state, and allows to selectively detect Cu²⁺ in MeCN with the formation of a 2:1 metal-receptor complex, with a green intense emission appreciable by naked eye under the UV lamp. The H₂L copper complex preserves its emission properties in the presence of Cl⁻. The addition of basic anions (OH⁻, CN⁻, and F⁻) up to 10 equivalents caused the deprotonation of the squaramide NHs and a dramatic change of the emission properties of the H₂L copper complex.

Unraveling the Origin of Differentiable 'Turn-On' Fluorescence Sensing of Zn2+ and Cd2+ Ions with Squaramides

A squaramide ring conjugated with Schiff-bases decorated with hydroxy and methoxy functional groups differentially senses zinc and cadmium ions, which turn on the fluorescence. The feebly emitting free ligands light up in the presence of zinc and cadmium acetates, with the acetate ion playing a pivotal role as a conjugate anion. The selective and differentiable emission responses for zinc and cadmium ions make these ligands efficient multi-analyte sensing agents. Furthermore, these ligands could be used to differentially sense zinc and cadmium ions even in aqueous environments. The NMR investigations reveal marginal differences in the binding of zinc and cadmium ions to the ligands, whereas density functional theory calculations suggest the different extent of ligand-to-metal charge transfer (LMCT) contributes to the differential behavior. Finally, comparison of the excited-state dynamics of free ligand and the metal complexes reveal the appearance of longer lifetime (about 500-700 ps) component with complexation, due to rigidified molecular skeleton, thereby impeding the non-radiative processes.

Functional Single-Walled Carbon Nanotubes for Anion Sensing

We report an anion-sensing platform wherein conductance changes are triggered by chemical interactions between selectors and anions. The selector design incorporates both a cationic moiety (i.e., pyridinium) and a thiourea-based dual-hydrogen-bond donor. Anion binding by a model selector (2) was studied using ¹H NMR and UV-vis titrations, which reveal a binding strength toward acetate ions (AcO^-) followed by Cl^- > Br^- > NO₃^-. These studies reveal that selector 2 is deprotonated upon addition of AcO^-, whereas it undergoes hydrogen bonding associated with Cl^-, Br^-, and NO₃^-. The cationic pyridinium moiety improves anion binding affinity by lowering the pK_a value of selector 2 and enhancing the hydrogen-bond donor capability as confirmed by spectroscopic titrations and DFT calculations. The selector is covalently attached to poly(4-vinylpyridine) (P4VP), which wraps single-walled carbon nanotubes (SWCNTs) (i.e., P4VP-2-SWCNT) to transduce an electrical signal. As a result, continuous anion sensing was achieved with high sensitivity represented by a normalized resistance change of 101.9 ± 10.3% toward 16.7 mM AcO^-, whereas negligible sensitivity was observed toward Cl^-, Br^-, and NO₃^-. The sensitivity transition was attributed to the internal charge transfer of 2 by deprotonation of the thiourea proton upon addition of AcO^-.

Extraction and transport of sulfate using macrocyclic squaramide receptors

Lipophilic macrocycles efficiently extract sulfate ions from water into chloroform and transport this ion across a bulk liquid membrane in the presence of competing anions (chloride, nitrate and dihydrogenphosphate).

On the recognition of chloride, bromide and nitrate anions by anthracene–squaramide conjugated compounds: a computational perspective

Anionic recognition appears in several biological processes. Here, the interaction between anthracene–squaramide conjugated compounds and Cl⁻, Br⁻ and NO₃⁻ anions has been explored using density functional theory (DFT) calculations.

Squaramide based ion pair receptors possessing ferrocene as a signaling unit

Ferrocene offers a convenient reporter in squaramide based ion pair sensors able to recognize anions more strongly in the presence of cations.

Synthesis and characterization of cyclobutenedione-bithiophene π-conjugated polymers: acetal-protecting strategy for Kumada-Tamao-Corriu coupling polymerization between aryl bromide and Grignard reagents

Cyclobutenedione is an aromatic ring that exhibits strong electron-withdrawing properties but is susceptible to undesired reactions with nucleophiles. Herein, Kumada–Tamao–Corriu coupling polymerization of a cyclobutenedione monomer whose carbonyl groups are protected as acetals was achieved. Hydrolysis of the acetals afforded donor–acceptor type π-conjugated polymers consisting of cyclobutenedione as an acceptor unit and bithiophene as a donor unit. The acetal-protected monomer was also subjected to Suzuki–Miyaura coupling polymerization. The absorption and emission spectra of the deprotected polymers shifted to the longer wavelength compared with the acetal-protected polymers.

Donor–acceptor-type π-conjugated polymers consisting of cyclobutenedione as an acceptor and bithiophene as a donor were synthesized by Kumada–Tamao–Corriu coupling polymerization of an acetal-protected monomer.

Surface Modification of Pseudoboehmite-Coated Aluminum Plates with Squaramic Acid Amphiphiles

The functionalization of interfaces has become very important for the protection or modification of metal (metal oxides) surfaces. The functionalization of aluminum is particularly interesting because of its relevance in fabricating components for electronic devices. In this work, the utilization of squaramic acids for the functionalization of aluminum substrates is reported for the first time. The physicochemical properties of the interfaces rendered by n-alkyl squaramic acids on aluminum metal substrates coated with pseudoboehmite [Al(O)x(OH)y] layers are characterized by contact angle, grazing-angle Fourier-transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and matrix-assisted laser desorption ionization time-of-flight. Moreover, we could confirm the squaramic functionalization of the substrates by diffuse reflectance UV-vis spectroscopy, which cannot be used for the characterization of UV-vis-inactive substrates such as carboxylates and phosphonates, commonly used for coating metallic surfaces. Remarkably, the results of sorption experiments indicate that long-chain alkyl squaramic acid desorbs from activated-aluminum substrates at a reduced rate compared to palmitic acid, a carboxylic acid frequently used for the functionalization of metal oxide surfaces. Theoretical calculations indicate that the improved anchoring properties of squaramic acids over carboxylates are probably due to the formation of additional hydrogen bonding interactions on the interface. Accordingly, we propose N-alkyl squaramic acids as new moieties for efficient functionalization of metal oxides.

Squaramide-Naphthalimide Conjugates as "Turn-On" Fluorescent Sensors for Bromide Through an Aggregation-Disaggregation Approach

The syntheses of two new squaramide-naphthalimide conjugates (SQ1 and SQ2) are reported where both compounds have been shown to act as selective fluorescence "turn on" probes for bromide in aqueous DMSO solution through a disaggregation induced response. SQ1 and SQ2 displayed a large degree of self-aggregation in aqueous solution that is disrupted at increased temperature as studied by ¹H NMR and Scanning Electron Microscopy (SEM). Moreover, the fluorescence behavior of both receptors was shown to be highly dependent upon the aggregation state and increasing temperature gave rise to a significant increase in fluorescence intensity. Moreover, this disaggregation induced emission (DIE) response was exploited for the selective recognition of certain halides, where the receptors gave rise to distinct responses related to the interaction of the various halide anions with the receptors. Addition of F^- rendered both compounds non-emissive; thought to be due to a deprotonation event while, surprisingly, Br^- resulted in a dramatic 500-600% fluorescence enhancement thought to be due to a disruption of compound aggregation and allowing the monomeric receptors to dominate in solution. Furthermore, optical sensing parameters such as limits of detection and binding constant of probes were also measured toward the various halides (F^-, Cl^-, Br^-, and I^-) where both SQ1 and SQ2 were found to sense halides with adequate sensitivity to measure μM levels of halide contamination. Finally, initial studies in a human cell line were also conducted where it was observed that both compounds are capable of being taken up by HeLa cells, exhibiting intracellular fluorescence as measured by both confocal microscopy and flow cytometry. Finally, using flow cytometry we were also able to show that cells treated with NaBr exhibited a demonstrable spectroscopic response when treated with either SQ1 or SQ2.

Single-system based discriminative optical sensors: different strategies and versatile applications

Discriminative optical sensors with pattern recognition properties and high-throughput ability have been widely developed as they can distinguish multiple chemically similar analytes. Compared to traditional sensor arrays composed of a series of sensor elements, single-system based discriminative sensors using an array of optical changes at different wavelengths to provide input signals have drawn intensive attention recently. On the one hand, they can provide discrimination ability that is lack in using selective sensors; on the other hand, they can simplify the complex data acquisition process accompanied by multiple-element-based sensor arrays and reduce consumption of sensor samples. This tutorial review gives an overview of the development of single-system based discriminative optical sensors. Different strategies for the construction of single-system based discriminative sensors including dynamic combinatorial libraries, cross-reactive conjugated polymers, DNA G-quadruplex ensembles, combinatorial fluorescent molecular sensors, and fluorophore/surfactant aggregate ensembles are particularly introduced.

Phosphate and polyphosphate anion recognition by a dinuclear copper(ii) complex of an unsymmetrical squaramide

At pH = 7.4, ATP⁴⁻ is selectively removed from water containing PhPO₄²⁻, Haep⁻, AMP²⁻ and ADP³⁻ by the studied squaramide-based dicopper(ii) complex.

Double layer 3D codes: fluorescent supramolecular polymeric gels allowing direct recognition of the chloride anion using a smart phone

Reported here is a two-layer gel construct that permits the on-site detection of the chloride anion by means of a hand-held UV-vis lamp and a smart phone "app". To prepare this system, eight fluorescent polymeric gels G1-G8 were synthesized. Gels G1-G4 containing C4P/imidazolium-F- anion recognition motifs were used to construct a fluorescent pattern (Code A) that may be read out by a smart phone as a 3D color code (Info A). Gels G5-G8, which are based on C4P/imidazolium-Br- anion interactions, were used to construct an array (Code B) that may be read as Info B. Code B was then adhered to the surface of Code A to produce an adhered double layer code system stabilized by interfacial C4P/imidazolium-Br- anion interactions. Readout of the top layer (Code B) could be achieved without interference from Code A. Treatment with a Cl- anion source was found to delaminate the top layer and leave intact the more robust bottom layer, allowing the bottom layer (Code A) to be read out. The disparate information content associated with Codes A and B thus permits the on-site recognition of Cl-. The present sensing strategy does not rely on elaborate instrumentation and could provide a new application for elaborated soft materials.

Recognition and Extraction of Sodium Chloride by a Squaramide-Based Ion Pair Receptor

We synthesized an ion pair receptor 1 consisting of a crown ether cation binding site and a squaramide anion binding domain and compared its binding properties to those of its analogous urea counterpart 2. We studied their salt binding properties using spectrophotometric and spectroscopic measurements in an acetonitrile solution and in acetonitrile/water mixtures. Apart from carboxylate anions, all of the anions tested were found to associate with receptor 1 and 2 more strongly in the presence of sodium cations. A homotopic anion receptor 3, lacking a crown ether unit, was unable to bind sodium salt more strongly than tetrabutylammonium salts. Solution and solid-state X-ray measurements revealed strong sodium chloride coordination to receptor 1, which is able to bind this salt even in the presence of 10% water. In contrast to the urea-based ion pair receptor 2 or anion receptor 3, ditopic receptor 1 is capable of extracting sodium chloride from aqueous media to the organic phase, as was evidenced unambiguously by ¹H nuclear magnetic resonance, mass spectrometry, and atomic absorption spectroscopy analyses.

Croconamides: a new dual hydrogen bond donating motif for anion recognition and organocatalysis

We introduce bis-aryl croconamides as a new member in the family of dual hydrogen bonding anion receptors. In this study a series of croconamides are synthesised, and the selectivity for anion binding is investigated (Cl^- > Br^- > I^- in CH₂Cl₂). The croconamides exhibit different structures in the crystal phase depending on the substituents on the aromatic rings, and furthermore, the crystal structure revealed the presence of tautomers. DFT calculations elucidated the complex structures formed upon addition of anion to the croconamides, confirming the order of association constants towards the halogen anions. The use of croconamides as organocatalysts in a proof-of-concept study is demonstrated in the formation of THP ethers. In addition to this, construction of a Hammet plot further elucidates the mechanism in action on formation of THP ethers.

H-Bonded anion–anion complex trapped in a squaramido-based receptor

We report the experimental observation (X-ray characterization) of an anion–anion complex (anion = hydrogen fumarate) stabilized by H-bonds that is trapped in a secondary squaramide receptor.

Polymorphism in secondary squaramides: on the importance of π-interactions involving the four membered ring

We report the crystal structures of four new squaric acid derivatives, i.e. three polymorphs of 3,4-bis((2-(dimethylamino)ethyl)amino)cyclobut-3-ene-1,2-dione (1a–c) and a cocrystal with resorcinol. A DFT study has been also carried out to investigate the supramolecular assemblies.

Kinetic Analysis and Mechanism of the Hydrolytic Degradation of Squaramides and Squaramic Acids

The hydrolytic degradation of squaramides and squaramic acids, the product of partial hydrolysis of squaramides, has been evaluated by UV spectroscopy at 37 °C in the pH range 3-10. Under these conditions, the compounds are kinetically stable over long time periods (>100 days). At pH >10, the hydrolysis of the squaramate anions shows first-order dependence on both squaramate and OH^-. At the same temperature and [OH^-], the hydrolysis of squaramides usually displays biphasic spectral changes (A → B → C kinetic model) with formation of squaramates as detectable reaction intermediates. The measured rates for the first step (k₁ ≈ 10^-4 M^-1 s^-1) are 2-3 orders of magnitude faster than those for the second step (k₂ ≈ 10^-6 M^-1 s^-1). Experiments at different temperatures provide activation parameters with values of ΔH^⧧ ≈ 9-18 kcal mol^-1 and ΔS^⧧ ≈ -5 to -30 cal K^-1 mol^-1. DFT calculations show that the mechanism for the alkaline hydrolysis of squaramic acids is quite similar to that of amides.

Macrocyclic squaramides: anion receptors with high sulfate binding affinity and selectivity in aqueous media

A number of macrocyclic squaramide-containing receptors (MSQs) have been designed and synthesised and their interaction with a range of inorganic anions was studied in solution by ¹H NMR spectroscopy and ESI-HRMS. The binding data revealed remarkable binding of sulfate in aqueous mixtures from 0.5 to 50% v/v H₂O/DMSO-d₆. The larger [3]-MSQs were found to better match the size and shape of the sulfate ion than the [2]-MSQs, providing high affinity and selectivity for sulfate while other tetrahedral divalent anions such as selenate, phosphate species and chromate have substantially lower binding affinities. In mixtures of anions mimicking the composition of either nuclear waste or plasma, the [3]-MSQs were still able to bind sulfate ions with high affinity.

Halogen-bonding for visual chloride ion sensing: a case study using supramolecular poly(aryl ether) dendritic organogel systems

A convenient and straightforward method for the visual recognition of chloride ion has been established through a chloride-responsive dendritic organogel.

pH switchable anion transport by an oxothiosquaramide

An oxothiosquaramide was shown to bind to chloride through hydrogen bonding interactions in DMSO and found to exhibit pH switchable choride transport across phospholipid bilayers via an antiport transport mechanism.