Carbonylative Suzuki couplings of aryl bromides with boronic acid derivatives under base-free conditions

Synthesis of unsymmetrical ketones via dual catalysed cross-coupling of α,β-unsaturated carboxylic acids with aryldiazonium salts

A visible light-enabled synthesis of unsymmetrical ketones has been accomplished by the cross-coupling of α,β-unsaturated carboxylic acids and aryldiazonium salts embracing a synergistic eosin Y and Co(OAc)2·4H2O catalysis. The reaction involves decarboxylative aerobic CC bond cleavage, and is endowed with the creation of new C-C and C-O bonds with good substrate scope.

Carbonylative Transformations Using a DMAP-Based Pd-Catalyst through Ex Situ CO Generation

A phosphine-free, efficient protocol for aminocarbonylation and carbonylative Suzuki-Miyaura coupling has been developed using a novel palladium complex, [PdII(DMAP)2(OAc)2]. The complex was successfully synthesized using a stoichiometric reaction between PdII(OAc)2 and DMAP in acetone at room temperature and characterized using single-crystal X-ray analysis. Only 5 mol % catalyst loading was sufficient for effective carbonylative transformations. "Chloroform-COware" chemistry was utilized for safe and facile insertion of the carbonyl unit using chloroform as an inexpensive CO source in a two-chamber setup. Various value-added pharmaceutically relevant compounds such as CX-516, CX-546, and farampator were synthesized using the technique. Furthermore, the commercially designed COware was engineered to COware-RB setup for sequential one-pot synthesis of indenoisoquinolines (topoisomerase I inhibitors).

Carboxyboronate as a Versatile In Situ CO Surrogate in Palladium-Catalyzed Carbonylative Transformations

The application of carboxy-MIDA-boronate (MIDA=N-methyliminodiacetic acid) as an in situ CO surrogate for various palladium-catalyzed transformations is described. Carboxy-MIDA-boronate was previously shown to be a bench-stable boron-containing building block for the synthesis of borylated heterocycles. The present study demonstrates that, in addition to its utility as a precursor to heterocycle synthesis, carboxy-MIDA-boronate is an excellent in situ CO surrogate that is tolerant of reactive functionalities such as amines, alcohols, and carbon-based nucleophiles. Its wide functional-group compatibility is highlighted in the palladium-catalyzed aminocarbonylation, alkoxycarbonylation, carbonylative Sonogashira coupling, and carbonylative Suzuki-Miyaura coupling of aryl halides. A variety of amides, esters, (hetero)aromatic ynones, and bis(hetero)aryl ketones were synthesized in good-to-excellent yields in a one-pot fashion.

Recent progress in application of nanocatalysts for carbonylative Suzuki cross-coupling reactions

In the past few decades, cross-coupling of aryl halides and arylboronic acids in the presence of carbon monoxide (CO), also called carbonylative Suzuki coupling, to form two new carbon-carbon bonds in the production of synthetically and biologically important biaryl ketones, has been widely studied. Consequently, various catalytic systems have been extensively investigated in order to maximize the efficiency of this appealing area of biaryl ketone synthesis. As evidenced in the literature, nanometal-based systems are among the most powerful catalysts for this transformation as their large surface area to volume ratio and reactive morphologies allow faster reaction rates under milder CO pressure even at very low catalyst loadings. This review aims to provide an overview of the recent advances and achievements in the application of nano-sized metal catalysts for carbonylative Suzuki cross-coupling reactions, which may serve as an inspiration to researchers in their future work.

Controlled Release of Reactive Gases: A Tale of Taming Carbon Monoxide

This Personal Account describes the development of air-stable and solid precursors for on-demand release of carbon monoxide. In combination with the development of a two-chamber reactor, COware®, CO liberation can be achieved under safe working conditions, as well as allowing transition metal-mediated carbonylations with stoichiometric carbon monoxide. Particularly appealing is the adaptability of this chemical technology for the preparation of carbon isotope labeled bioactive compounds.

Carbonylative Suzuki-Miyaura couplings of sterically hindered aryl halides: synthesis of 2-aroylbenzoate derivatives

We have developed a carbonylative approach to the synthesis of diversely substituted 2-aroylbenzoate esters featuring a new protocol for the carbonylative coupling of aryl bromides with boronic acids and a new strategy to favour carbonylative over non-carbonylative reactions. Two different synthetic pathways - (i) the alkoxycarbonylation of 2-bromo benzophenones and (ii) the carbonylative Suzuki-Miyaura coupling of 2-bromobenzoate esters - were evaluated. The latter approach provided a broader substrate tolerance, and thus was the preferred pathway. We observed that 2-substituted aryl bromides were challenging substrates for carbonylative chemistry favouring the non-carbonylative pathway. However, we found that carbonylative Suzuki-Miyaura couplings can be improved by slow addition of the boronic acid, suppressing the unwanted direct Suzuki coupling and, thus increasing the yield of the carbonylative reaction.

Direct Access to Isotopically Labeled Aliphatic Ketones Mediated by Nickel(I) Activation

An extensive range of functionalized aliphatic ketones with good functional-group tolerance has been prepared by a Ni^I -promoted coupling of either primary or secondary alkyl iodides with NN₂ pincer Ni^II -acyl complexes. The latter were easily accessed from the corresponding Ni^II -alkyl complexes with stoichiometric CO. This Ni-mediated carbonylative coupling is adaptable to late-stage carbon isotope labeling, as illustrated by the preparation of isotopically labelled pharmaceuticals. Preliminary investigations suggest the intermediacy of carbon-centered radicals.

i-Pr2NMgCl·LiCl Enables the Synthesis of Ketones by Direct Addition of Grignard Reagents to Carboxylate Anions

The direct preparation of ketones from carboxylate anions is greatly limited by the required use of organolithium reagents or activated acyl sources that need to be independently prepared. Herein, a specific magnesium amide additive is used to activate and control the addition of more tolerant Grignard reagents to carboxylate anions. This strategy enables the modular synthesis of ketones from CO₂ and the preparation of isotopically labeled pharmaceutical building blocks in a single operation.

5-Bromo-norborn-2-en-7-one derivatives as a carbon monoxide source for palladium catalyzed carbonylation reactions

Norbornenone (5b), obtained from the reaction of 2,5-dimethyl-3,4-diphenylcyclopentadienone dimer (3) with bromomaleic anhydride (4b), provides an excellent base-triggered source of carbon monoxide for palladium-catalysed carbonylation reactions. Aminocarbonylation, ketoamide synthesis, and Suzuki–Miyaura reactions of aryl iodides carried out in a two-chamber reaction vessel gave good to excellent yields of carbonylated products.

Norbornenone (5b), obtained from the reaction of 2,5-dimethyl-3,4-diphenylcyclopentadienone dimer (3) with bromomaleic anhydride (4b), provides an excellent base-triggered source of carbon monoxide for palladium-catalysed carbonylation reactions.

Theoretical Coupling and Stability of Boronic Acid Adducts with Catecholamines

Background:

Catecholamines combined with boric/boronic acids are attractive chemical agents in drug design because some of their adducts have shown interesting biological activity. Scant information exists about their stability.

Objective:

The aim of the present theoretical study was to explore the role of boron in molecules that combine catecholamines and boric/boronic acids, with a particular interest in examining stability.

Method:

The methodology was based on the US GAMESS program using DFT with the B3LYP exchange-correlation functional and the 6-31G (d,p) split-valence basis set.

Results:

According to the current findings, the boron-containing compounds (BCCs) exhibit weaker bonding to the hydroxyls on the ethylamine moiety than to those in the aromatic ring. The strongest binding site of a hydroxyl group was often found to be in meta-position (relative to ethylamine moiety) for boron-free compounds and in para-position for BCCs. Nonetheless, the methyl substituent in the amino group was able to induce changes in this pattern. We analyzed feasible boronsubstituted structures and assessed the relative strength of the respective C-B bonds, which allowed for the identification of the favorable points for reaction and stability.

Conclusion:

It is feasible to form adducts by bonding on the amine and catechol sides of catecholamines. The presence of boron stabilizes the adducts in para-position. Since some of these BCCs are promising therapeutic agents, understanding the mechanisms of reaction is relevant for drug design.

Continuous flow synthesis of diaryl ketones by coupling of aryl Grignard reagents with acyl chlorides under mild conditions in the ecofriendly solvent 2-methyltetrahydrofuran

An efficient continuous flow sequential synthesis of diaryl ketones was achieved by coupling of aryl Grignard reagents with acyl chlorides in the bio-derived “green” solvent 2-methyltetrahydrofuran (2-MeTHF) under mild reaction conditions (ambient temperature, 1 hour), allowing a safe and on-demand generation of 2-(3-benzoylphenyl)propionitrile with a productivity of 3.16 g hour⁻¹.

Continuous flow method for parallel synthesis of diaryl ketones using commercially available reagents.

Benzophenone: a ubiquitous scaffold in medicinal chemistry

The benzophenone scaffold represents a ubiquitous structure in medicinal chemistry because it is found in several naturally occurring molecules which exhibit a variety of biological activities, such as anticancer, anti-inflammatory, antimicrobial, and antiviral. In addition, various synthetic benzophenone motifs are present in marketed drugs. They also represent important ingredients in perfumes and can act as photoinitiators. This review will provide an overview of benzophenone moieties with medicinal aspects synthesized in the last 15 years and will cover the most potent molecule in each report. In this review, only benzophenones with substitutions on their aryl rings, i.e. diphenyl ketone analogues, have been covered.

Transition-Metal-Free Regiospecific Aroylation of Nitroarenes Using Ethyl Arylacetates at Room Temperature

A novel regiospecific C(sp³)-C(sp²) coupling between ethyl arylacetates and nitroarenes has been developed to deliver biaryl ketones in excellent yields. The protocol is metal-free, mild, and compatible with a number of functional groups on both of the reacting partners.

Palladium and visible-light mediated carbonylative Suzuki–Miyaura coupling of unactivated alkyl halides and aryl boronic acids

An efficient carbonylative coupling of aryl boronic acids and unactivated alkyl halides under visible-light irradiation and low CO-pressure is presented.

Pd–ZnO nanowire arrays as recyclable catalysts for 4-nitrophenol reduction and Suzuki coupling reactions

Hybrid Pd–ZnO nanowire arrays for catalysis: Pd–ZnO@Zn nanowire arrays have been found to be applicable as recyclable catalysts for 4-nitrophenol reduction and Suzuki coupling reactions.

Palladium-Catalyzed Room-Temperature Acylative Suzuki Coupling of High-Order Aryl Borons with Carboxylic Acids

This note describes a dimethyl dicarbonate-assisted, Pd(OAc)2/PPh3-catalyzed acylative Suzuki coupling of carboxylic acids with diarylborinic acids or tetraarylboronates for practical and efficient synthesis of sterically undemanding aryl ketones at room temperature. More than just cost-effective alternatives to aryl boronic acids, diarylborinic acids and tetraarylboronates displayed higher reactivity in the acylative Suzuki coupling. A variety of alkyl aryl ketones, including those bearing a hydroxy, bromo, or carbonyl group, could be readily obtained in modest to excellent yields.

The Development and Application of Two-Chamber Reactors and Carbon Monoxide Precursors for Safe Carbonylation Reactions

Low molecular weight gases (e.g., carbon monoxide, hydrogen, and ethylene) represent vital building blocks for the construction of a wide array of organic molecules. Whereas experimental organic chemists routinely handle solid and liquid reagents, the same is not the case for gaseous reagents. Synthetic transformations employing such reagents are commonly conducted under pressure in autoclaves or under atmospheric pressure with a balloon setup, which necessitates either specialized equipment or potentially hazardous and nonrecommended installations. Other safety concerns associated with gaseous reagents may include their toxicity and flammability and, with certain gases, their inability to be detected by human senses. Despite these significant drawbacks, industrial processes apply gaseous building blocks regularly due to their low cost and ready availability but nevertheless under a strictly controlled manner. Carbon monoxide (CO) fits with all the parameters for being a gas of immense industrial importance but with severe handling restrictions due to its inherent toxicity and flammability. In academia, as well as research and development laboratories, CO is often avoided because of these safety issues, which is a limitation for the development of new carbonylation reactions. With our desire to address the handling of CO in a laboratory setting, we designed and developed a two-chamber reactor (COware) for the controlled delivery and utilization of stoichiometric amounts of CO for Pd-catalyzed carbonylation reactions. In addition to COware, two stable and solid CO-releasing molecules (COgen and SilaCOgen) were developed, both of which release CO upon activation by either Pd catalysis or fluoride addition, respectively. The unique combination of COware with either COgen or SilaCOgen provides a simple reactor setup enabling synthetic chemists to easily perform safe carbonylation chemistry without the need for directly handling the gaseous reagent. With this technology, an array of low-pressure carbonylations were developed applying only near stoichiometric amounts of carbon monoxide. Importantly, carbon isotope variants of the CO precursors, such as (13)COgen, Sila(13)COgen, or even (14)COgen, provide a simple means for performing isotope-labeling syntheses. Finally, the COware applicability has been extended to reactions with other gases, such as hydrogen, CO2, and ethylene including their deuterium and (13)C-isotopically labeled versions where relevant. The COware system has been repeatedly demonstrated to be a valuable reactor for carrying out a wide number of transition metal-catalyzed transformations, and we believe this technology will have a significant place in many organic research laboratories.

Palladium nanoparticles generated in situ used as catalysts in carbonylative cross-coupling in aqueous medium

Pd NPs, obtained in situ from imidazole complexes Pd(im)₂Cl₂ (im = methylimidazole, butylimidazole), efficiently catalyze the carbonylative Suzuki coupling in water at 80 °C and 1 atm of CO.

Recent advances in the transition metal catalyzed carbonylation of alkynes, arenes and aryl halides using CO surrogates

Transition metal catalyzed carbonylation reactions using carbon monoxide as the C-1 source have occupied an all important position in catalysis which is subsequently related to organic synthesis and industrial synthesis of molecules.

Transition-metal-free, ambient-pressure carbonylative cross-coupling reactions of aryl halides with potassium aryltrifluoroborates

A transition-metal-free, ambient-pressure, and general methodology for carbonylative Suzuki coupling has been developed.

Pd-catalyzed carbonylative access to aroyl phosphonates from (hetero)aryl bromides

This first carbonylative coupling employing a phosphorus-based nucleophile provides easy and safe access to acyl phosphonates under mild conditions.

Palladium-catalysed carbonylative α-arylation of nitromethane

A palladium-catalysed approach to α-nitroketones via carbonylative α-arylation of nitromethane is presented, thus providing easy access to key intermediates and important heterocycles.

Reversed-Polarity Synthesis of Diaryl Ketones through Palladium-Catalyzed Direct Arylation of 2-Aryl-1,3-dithianes

An umpolung approach to the synthesis of diaryl ketones has been developed based on in situ generation of acyl anion equivalents and their catalytic arylation. This method entails the base promoted palladium catalyzed direct C-H arylation of 2 The resulting 2,2-diaryl-1,3-dithianes with aryl bromides. Use of MN(SiMe3)2 (M=Li, Na) base results in reversible deprotonation of the weakly acidic dithiane. In the presence of a Pd(NiXantphos)-based catalyst and aryl bromide, cross-coupling of the metallated 2-aryl-1,3-dithiane takes place under mild conditions (2 h at rt) with yields as high as 96%. The resulting 2,2-diaryl-1,3-dithianes were converted into diaryl ketones by either molecular iodine, N-bromo succinimide (NBS) or Selectfluor in the presence of water. The dithiane arylation/hydrolysis can be performed in a one-pot procedure to yield a good to excellent yields. This method is suitable for rapid and large-scale synthesis of diaryl ketones. A one-pot preparation of anti-cholesterol drug fenofibrate (TriCor®) has been achieved on 10.0 mmol scale in 86% yield.