π−π Interactions in Organometallic Systems. Crystal Structures and Spectroscopic Properties of Luminescent Mono-, Bi-, and Trinuclear Trans-cyclometalated Platinum(II) Complexes Derived from 2,6-Diphenylpyridine

Phosphorescent PdII-PdII Emitter-Based Red OLEDs with an EQEmax of 20.52

Three dinuclear Pd(II) complexes (1, 2, and 3) with intense red phosphorescence at room temperature are here synthesized using strong ligand field strength compounds. All three complexes are characterized by nuclear magnetic resonance, high-resolution mass spectrometry, and elemental analyses. Complexes 2 and 3 are characterized by single-crystal X-ray diffraction. The crystalline data of 2 and 3 reveal complex double-layer structures, with Pd-Pd distances of 2.8690(9) Å and 2.8584(17) Å, respectively. Furthermore, complexes 1, 2, and 3 show phosphorescence at room temperature in their solid states at the wavelengths of 678, 601, and 672 nm, respectively. In addition, they show phosphorescence at 634, 635, and 582 nm, respectively, in the 2 wt.% (PMMA) films, and phosphorescence at 670, 675, and 589 nm, respectively, in the deoxygenated CH2Cl2 solutions. Among three complexes, complex 1 shows red emission at 634 nm with phosphorescent quantum yield Ф = 67% in the 2 wt.% PMMA film. Furthermore, complex 1-based organic light-emitting diode is fabricated using a vapor-phase deposition process, and their maximum external quantum efficiency reaches 20.52%, which is the highest percentage obtained by using the dinuclear Pd(II) complex triplet emitters with the CIE coordinates of (0.62, 0.38).

DPPM-Bridged Binuclear Pt(II) Pincer Complexes: Chemistry, Structure, and Photophysics in Solution Revisited

A series of luminescent binuclear ([dppm{Pt(NNC)}2]2+) and mononuclear ([PPh3Pt(NNC)]+) complexes containing pincer ligands were synthesized and characterized. Photophysical characteristics of both types of complexes were studied in dichloromethane solution. In the solid phase, the binuclear compounds adopt a syn configuration where the {Pt(NNC)} fragments are held together due to intramolecular Pt-Pt bonding and π-stacking of the pincer ligand aromatic systems. Analysis of the complexes' molecular structure in solution by multinuclear NMR spectroscopy showed that the stacked intramolecular configuration is retained in fluid media, which is in complete agreement with a considerable red shift of the emission wavelength due to formation of the intramolecular Pt-Pt bond, leading to the transformation of an emissive excited state to 3MMLCT. It was also found that triethylamine quenches the emission of both types of complexes; the mechanism of quenching is a combination of dynamic and static channels of excited-state deactivation. In the case of binuclear complexes, deprotonation of the dppm methylene bridge by triethylamine also contributes to the chromophore quenching. To explain the observed chemistry of binuclear complex interactions with Et3N, a chemical equilibrium scheme was suggested, which was confirmed by quantitative monitoring of the 31P signal variations as a function of triethylamine concentration.

One Dianionic Luminophore with Three Coordination Modes Binding Four Different Metals: Toward Unexpectedly Phosphorescent Transition Metal Complexes

This work reports on a battery of coordination compounds featuring a versatile dianionic luminophore adopting three different coordination modes (mono, bi, and tridentate) while chelating Pd(II), Pt(II), Au(III), and Hg(II) centers. An in-depth structural characterization of the ligand precursor (H2 L) and six transition metal complexes ([HLPdCNtBu], [LPtCl], [LPtCNtBu], [LPtCNPhen], [HLHgCl], and [LAuCl]) is presented. The influence of the cations and coordination modes of the luminophore and co-ligands on the photophysical properties (including photoluminescence quantum yields (ΦL ), excited state lifetimes (τ), and average (non-)radiative rate constants) are evaluated at various temperatures in different phases. Five complexes show interesting photophysical properties at room temperature (RT) in solution. Embedment in frozen glassy matrices at 77 K significantly boosts their luminescence by suppressing radiationless deactivation paths. Thus, the Pt(II)-based compounds provide the highest efficiencies, with slight variations upon exchange of the ancillary ligand. In the case of [HLPdCNtBu], both ΦL and τ increase over 30-fold as compared to RT. Furthermore, the Hg(II) complex achieves, for the first time in its class, a ΦL exceeding 60% and millisecond-range lifetimes. This demonstrates that a judicious ligand design can pave the way toward versatile coordination compounds with tunable excited state properties.

Synthesis and Optoelectronic Properties of a Novel Pt(IV)(C∧N∧C)(Cl)2(DMSO) Complex Cyclometalated by Tridentate Diphenylpyridine

A novel tridentate-cyclometalating Pt(IV) complex, namely, Pt(IV)(C∧N∧C)(Cl)2(DMSO), is initially synthesized through a series of reactions using Pt(II) complexes. The optoelectronic properties of Pt(IV)(C∧N∧C)(Cl)2(DMSO) are fully studied by adequate characterizations.

Enhanced luminescence properties through heavy ancillary ligands in [Pt(C^N^C)(L)] complexes, L = AsPh3 and SbPh3

In the frame of our research aiming to develop efficient triplet-emitting materials, we are exploring the concept of introducing additional heavy atoms into cyclometalated transition metal complexes to enhance intersystem-crossing (ISC) and thus triplet emission through increased spin-orbit coupling (SOC). In an in-depth proof-of-principle study we investigated the double cyclometalated Pt(II) complexes [Pt(C^N^C)(PnPh3)] (HC^N^CH = 2,6-diphenyl-pyridine (H2dpp) or dibenzoacridine (H2dba); Pn = pnictogen atoms P, As, Sb, or Bi) through a combined experimental and theoretical approach. The derivatives containing Pn = P, As, and Sb were synthesised and characterised comprehensively using single crystal X-ray diffraction (scXRD), UV-vis absorption and emission spectroscopy, transient absorption (TA) spectroscopy and cyclic voltammetry (CV). Across the series P < As < Sb, a red-shift is observed concerning absorption and emission maxima as well as optical and electrochemical HOMO-LUMO gaps. Increased photoluminescence quantum yields ΦL and radiative rates kr from mixed metal-to-ligand charge transfer (MLCT)/ligand centred (LC) triplet states are observed for the heavier homologues. Transient absorption spectroscopy showed processes in the ps range that were assigned to the population of the T1 state by ISC. The heavy PnPh3 ancillary ligands are found to enhance the emission efficiency due to both higher Pt-Pn bond strength and stronger SOC related to increased MLCT character of the excited states. The experimental findings are mirrored in hybrid (TD-)DFT calculations. This allowed for extrapolation to the rather elusive Bi derivatives, which were synthetically not accessible. This shortcoming is attributed to the transmetalation of phenyl groups from BiPh3 to Pt, as supported by experimental NMR/MS as well as DFT studies.

Non-Palindromic C∧C∧P Platinum and Palladium Pincer Complexes Showing Intense Phosphorescence via Direct Spin-Forbidden S0 → T1 Excitation

The synthesis of C∧C∧P pre-ligands based on a dicyclohexylphosphine-substituted biphenyl framework is reported. The pre-ligands form the respective non-palindromic pincer complexes of PtII and PdII via double oxidative addition and subsequent comproportionation or C-H activation. The complexes of PtII as well as PdII emit similar green phosphorescence efficiently in the solid state, the former also in solution albeit with less intensity. The most fascinating photophysical feature, however, is a direct singlet-triplet (S0 → T1) excitation of this phosphorescence in the spectral window between the emission and the major singlet-singlet UV absorption. The S0 → T1 excitation spectra show a rich vibronic pattern, which is especially pronounced for the solid samples at cryogenic temperatures. The molar extinction of the lowest-energy singlet-triplet absorption band of the homologous Pt and Pd complexes as well as that of the Pt complex with a different (NHC) ancillary ligand were determined in tetrahydrofuran solutions. Quantum efficiencies of triplet formation (by intersystem crossing) via the "standard" excitation pathway S0 → Sn → T1 were determined for the Pt complexes and found to be different in dependence of the ancillary ligand.

Triplet Emitting C^N^C Cyclometalated Dibenzo[c,h]Acridine Pt(II) Complexes

In a series of Pt(II) complexes [Pt(dba)(L)] containing the very rigid, dianionic, bis-cyclometalating, tridentate C^N^C2− heterocyclic ligand dba2− (H2dba = dibenzo[c,h]acridine), the coligand (ancillary ligand) L = dmso, PPh3, CNtBu and Me2Imd (N,N’-dimethylimidazolydene) was varied in order to improve its luminescence properties. Beginning with the previously reported dmso complex, we synthesized the PPh3, CNtBu and Me2Imd derivatives and characterized them by elemental analysis, 1H (and 31P) NMR spectroscopy and MS. Cyclic voltammetry showed partially reversible reduction waves ranging between −1.89 and −2.10 V and increasing along the series Me2Imd < dmso ≈ PPh3 < CNtBu. With irreversible oxidation waves ranging between 0.55 (L = Me2Imd) and 1.00 V (dmso), the electrochemical gaps range between 2.65 and 2.91 eV while increasing along the series Me2Imd < CNtBu < PPh3 < dmso. All four complexes show in part vibrationally structured long-wavelength absorption bands peaking at around 530 nm. TD-DFT calculated spectra agree quite well with the experimental spectra, with only a slight redshift. The photoluminescence spectra of all four compounds are very similar. In fluid solution at 298 K, they show broad, only partially structured bands, with maxima at around 590 nm, while in frozen glassy matrices at 77 K, slightly blue-shifted (~580 nm) bands with clear vibronic progressions were found. The photoluminescence quantum yields ΦL ranged between 0.04 and 0.24, at 298 K, and between 0.80 and 0.90 at 77 K. The lifetimes τ at 298 K ranged between 60 and 14040 ns in Ar-purged solutions and increased from 17 to 43 µs at 77 K. The TD-DFT calculated emission spectra are in excellent agreement with the experimental findings. In terms of high ΦL and long τ, the dmso and PPh3 complexes outperform the CNtBu and Me2Imd derivatives. This is remarkable in view of the higher ligand strength of Me2Imd, compared with all other coligands, as concluded from the electrochemical data.

Multistimuli-Responsive Properties of Aggregated Isocyanide Cycloplatinated(II) Complexes

Here, we describe the neutral cyclometalated tert-butylisocyanide Pt^II complexes, [Pt(C^∧N)Cl(CNBu^t)] 1, the double salts [Pt(C^∧N)(CNBu^t)₂][Pt(C^∧N)Cl₂] 2, and the cationic complexes [Pt(C^∧N)(CNBu^t)₂]ClO₄ 3 [C∧N = difluorophenylpyridine (dfppy, a), 4-(2-pyridyl)benzaldehyde (ppy-CHO, b)]. A comparative study of the pseudopolymorphs 1a, 1a·CHCl₃, 1b, 1b·0.5Toluene, 1b·0.5PhF, and 3a·0.25CH₂Cl₂ reveals strong aggregation through Pt···Pt and/or π···π stacking interactions to give a variety of distinctive one-dimensional (1D) infinite chains, which modulate the photoluminescent properties. This intermolecular long-range aggregate formation is the main origin of the photoluminescent behavior of 1a and 1b complexes, which exhibit highly sensitive and reversible responses to multiple external stimuli including different volatile organic compounds (VOCs), solvents, temperatures, and pressures, with distinct color and phosphorescent color switching from green to red. Furthermore, complex 1b undergoes supramolecular self-assembly via Pt···Pt and/or π···π interactions into a polymer thin polystyrene (PS) film 10 wt % in response to toluene vapors, and 3a exhibits vapochromic and vapoluminescent behavior. Theoretical simulations on the dimer, trimer, and tetramer models of 1a and 1b have been carried out to get insight into the photophysical properties in the aggregated solid state.

Metal-Metal-to-Ligand Charge Transfer in Pt(II) Dimers Bridged by Pyridyl and Quinoline Thiols

The investigation of two distinct species of square planar dinuclear Pt(II) dimers based on anti-[Pt(C^∧N)(μ-N^∧S)]₂, where C^∧N is either 2-phenylpyridine (ppy) or benzo(h)quinoline (bzq) and N^∧S is pyridine-2-thiol (pyt), 6-methylpyridine-2-thiol (Mpyt), or 2-quinolinethiol (2QT), is presented. Each molecule was thoroughly characterized with electronic structure calculations, static UV-vis and photoluminescence (PL) spectroscopy, and cyclic voltammetry, along with transient absorbance and time-gated PL experiments. These visible absorbing chromophores feature metal-metal-to-ligand charge-transfer (MMLCT) excited states that originate from intramolecular d⁸-d⁸ metal-metal σ-interactions and are manifested in the ground- and excited-state properties of these molecules. All five molecules reported (anti-[Pt(ppy)(μ-Mpyt)]₂ could not be isolated), three of which are newly conceived here, possess electronic absorptions past 500 nm and high quantum yield PL emission with spectra extending into the far red (λ_em > 700 nm), originating from the charge-transfer state in each instance. Each chromophore displays excited-state decay kinetics adequately modeled by single exponentials as recorded using dynamic absorption and PL experiments; each technique yields similar decay kinetics. The combined data illustrate that pyridyl and quinoline-thiolates in conjunction with select cyclometalates represent classes of MMLCT chromophores that exhibit excited-state properties suitable for promoting light-energized chemical reactions and provide a molecular platform suitable for evaluating coherence phenomena in transient metal-metal bond-forming photochemistry.

Structure illumination microscopy imaging of lipid vesicles in live bacteria with naphthalimide-appended organometallic complexes

There is a lack of molecular probes for imaging bacteria, in comparison to the array of such tools available for the imaging of mammalian cells. Here, organometallic molecular probes have been developed and assessed for bacterial imaging, designed to have the potential to support multiple imaging modalities. The chemical structure of the probes is designed around a metal-naphthalimide structure. The 4-amino-1,8-naphthalimide moiety, covalently appended through a pyridine ancillary ligand, acts as a luminescent probe for super-resolution microscopy. On the other hand, the metal centre, rhenium(i) or platinum(ii) in the current study, enables techniques such as nanoSIMS. While the rhenium(i) complex was not sufficiently stable to be used as a probe, the platinum(ii) analogue showed good chemical and biological stability. Structured illumination microscopy (SIM) imaging on live Bacillus cereus confirmed the suitability of the probe for super-resolution microscopy. NanoSIMS analysis was used to monitor the uptake of the platinum(ii) complex within the bacteria and demonstrate the potential of this chemical architecture to enable multimodal imaging. The successful combination of these two moieties introduces a platform that could lead to a versatile range of multi-functional probes for bacteria.

Turn-on type sensing of methanol vapor by a luminescent platinum(II) dichloride complex with 21-dibenzoarsacrown-7

The development of turn-on detection sensors for methanol vapor remains challenging in materials science. Methanol sensing materials are generally based on vapor-triggered color changes or are turn-off types. Additionally, in general, the selectivity for methanol is limited, and the recyclability is low. Turn-on type sensing, high selectivity, rapid response time, and recyclability are favorable for achieving real-time detection systems. Herein, platinum(ii) dihalide (PtX2, X = Cl, Br, and I) complexes with 21-dibenzoarsacrown-7 were synthesized and their structures were characterized by single-crystal diffraction analysis. The PtCl2 complex showed intense emission when capturing methanol molecules in the crystalline matrix. In addition, this sensing system possessed high selectivity for methanol vapor and required facile recycling procedures.

A Brief History of OLEDs-Emitter Development and Industry Milestones

Organic light-emitting diodes (OLEDs) have come a long way ever since their first introduction in 1987 at Eastman Kodak. Today, OLEDs are especially valued in the display and lighting industry for their promising features. As one of the research fields that equally inspires and drives development in academia and industry, OLED device technology has continuously evolved over more than 30 years. OLED devices have come forward based on three generations of emitter materials relying on fluorescence (first generation), phosphorescence (second generation), and thermally activated delayed fluorescence (third generation). Furthermore, research in academia and industry toward the fourth generation of OLEDs is in progress. Excerpts from the history of green, orange-red, and blue OLED emitter development on the side of academia and milestones achieved by key players in the industry are included in this report.

Supramolecular Assembly of An Organoplatinum(II) Complex with Ratiometric Dual Emission for Two-Photon Bioimaging

The organoplatinum(II) complex [Pt(C^N^N)(Cl)] (C^N^N=5,6-diphenyl-2,2'-bipyridine, Pt1) can assemble into nanoaggregates via π-π stacking and complementary hydrogen bonds, rather than Pt-Pt interactions. Pt1 exhibits ratiometric dual emission, including rare blue emission (λ_em =445 nm) and assembly-induced yellow emission (λ_em =573 nm), under one- and two-photon excitation. Pt1 displays blue emission in cells with an intact membrane due to its low cellular uptake. In cells where the membrane is disrupted, uptake of the complex is increased and at higher concentrations yellow emission is observed. The ratio of yellow to blue emission shows a linear relationship to the loss of cell membrane integrity. Pt1 is, to our knowledge, the first example of an assembly-induced two-photon ratiometric dual emission organoplatinum complex. The excellent and unique characteristics of the complex enabled its use for the tracking of cell apoptosis, necrosis, and the inflammation process in zebrafish.

Influence of Ligand and Nuclearity on the Cytotoxicity of Cyclometallated C^N^C Platinum(II) Complexes

A series of cyclometallated mono- and di-nuclear platinum(II) complexes and the parent organic ligand, 2,6-diphenylpyridine 1 (HC^N^CH), have been synthesized and characterized. This library of compounds includes [(C^N^C)PtII (L)] (L=dimethylsulfoxide (DMSO) 2 and triphenylphosphine (PPh3 ) 3) and [((C^N^C)PtII )2 (L')] (where L'=N-heterocycles (pyrazine (pyr) 4, 4,4'-bipyridine (4,4'-bipy) 5 or diphosphine (1,4-bis(diphenylphosphino)butane (dppb) 6). Their cytotoxicity was assessed against four cancerous cell lines and one normal cell line, with results highlighting significantly increased antiproliferative activity for the dinuclear complexes (4-6), when compared to the mononucleated species (2 and 3). Complex 6 is the most promising candidate, displaying very high selectivity towards cancerous cells, with selectivity index (SI) values >29.5 (A2780) and >11.2 (A2780cisR), and outperforming cisplatin by >4-fold and >18-fold, respectively.

Unique vapochromism of a paddlewheel-type dirhodium complex accompanied by dynamic structural and phase transitions

The one-dimensional coordination polymer [Rh2(HA)4]n (1G; HA = hexanoate) exhibits a drastic vapochromic color change from green to red upon exposure to pyridine (py) vapor. Heating the red discrete complex [Rh2(HA)4(py)2] (1R) at 338 K affords the purple discrete tetrarhodium complex [Rh2(HA)4(py)]2 (1P), which is an intermediate species in the vapochromic transformation of 1G to 1R. The obtained complexes 1G, 1R, and 1P differ not only in their color in the solid state, but also in their temperature-dependent phase transition properties.

Modifying the luminescent properties of a Cu(i) diphosphine complex using ligand-centered reactions in single crystals

Here we report how reactions at a chemically reactive diphosphine shift the long-lived luminescent colour of a crystalline three-coordinate Cu(i) complex from green to blue. The results demonstrate how vapochromism and single-crystal-to-single-crystal transformations can be achieved using ligand-centered reactions.

Vapochromic crystals: understanding vapochromism from the perspective of crystal engineering

Vapochromic materials, which undergo colour and/or emission changes upon exposure to certain vapours or gases, have received increasing attention recently because of their wide range of applications in, e.g., chemical sensors, light-emitting diodes, and environmental monitors. Vapochromic crystals, as a specific kind of vapochromic materials, can be investigated from the perspective of crystal engineering to understand the mechanism of vapochromism. Moreover, understanding the vapochromism mechanism will be beneficial to design and prepare task-specific vapochromic crystals as one kind of low-cost 'electronic nose' to detect toxic gases or volatile organic compounds. This review provides important information in a broad scientific context to develop new vapochromic materials, which covers organometallic or coordination complexes and organic crystals, as well as the different mechanisms of the related vapochromic behaviour. In addition, recent examples of supramolecular vapochromic crystals and metal-organic-framework (MOFs) vapochromic crystals are introduced.

Fast-Response, Highly Air-Stable, and Water-Resistant Organic Photodetectors Based on a Single-Crystal Pt Complex

Organic semiconductors demonstrate several advantages over conventional inorganic materials for novel electronic and optoelectronic applications, including molecularly tunable properties, flexibility, low-cost, and facile device integration. However, before organic semiconductors can be used for the next-generation devices, such as ultrafast photodetectors (PDs), it is necessary to develop new materials that feature both high mobility and ambient stability. Toward this goal, a highly stable PD based on the organic single crystal [PtBr₂ (5,5'-bis(CF₃ CH₂ OCH₂ )-2,2'-bpy)] (or "Pt complex (1o)") is demonstrated as the active semiconductor channel-a material that features a lamellar molecular structure and high-quality, intraligand charge transfer. Benefitting from its unique crystal structure, the Pt-complex (1o) device exhibits a field-effect mobility of ≈0.45 cm² V^-1 s^-1 without loss of significant performance under ambient conditions even after 40 days without encapsulation, as well as immersion in distilled water for a period of 24 h. Furthermore, the device features a maximum photoresponsivity of 1 × 10³ A W^-1 , a detectivity of 1.1 × 10¹² cm Hz^1/2 W^-1 , and a record fast response/recovery time of 80/90 µs, which has never been previously achieved in other organic PDs. These findings strongly support and promote the use of the single-crystal Pt complex (1o) in next-generation organic optoelectronic devices.

Luminescent Platinum(IV) Complexes Bearing Cyclometalated 1,2,3-Triazolylidene and Bi- or Terdentate 2,6-Diarylpyridine Ligands

The synthesis, structure, and photophysical properties of luminescent Pt^IV complexes that combine cyclometalated 1,2,3-triazolylidene and bi- or terdentate 2,6-diarylpyridine ligands are reported. The targeted complexes represent the first examples of Pt^IV species with a cyclometalated mesoionic aryl-NHC ligand. They exhibit moderate or weak emissions in fluid solution at 298 K arising from ³ LC states, which become very intense in poly(methyl methacrylate) (PMMA) matrices at 298 K. DFT and TD-DFT calculations confirm that the chromophoric ligand is the cyclometalated 2,6-diarylpyridine and show that the aryl-NHC ligand exerts a beneficial effect on the emission efficiencies of these derivatives by increasing the energy of deactivating LMCT excited states with respect to comparable Pt^IV complexes with cyclometalated 2-arylpyridine ligands.

Effects of the number of cyclometalated rings and ancillary ligands on the rate of MeI oxidative addition to platinum(ii)–pincer complexes

The reactivity of new organoplatinum(ii)–pincer complexes in their oxidative addition reactions with MeI is related to the ancillary ligand and the number of cyclometalated rings present in the coordination sphere of the Pt centre.

Luminescence color alteration induced by trapped solvent molecules in crystals of tetrahedral gold(i) complexes: near-unity luminescence mixed with thermally activated delayed fluorescence and phosphorescence

Emission color alteration caused by captured solvent molecules in the crystal lattice of tetrahedral gold(i) complexes.

Recent advances in phosphorescent platinum complexes for organic light-emitting diodes

Phosphorescent organometallic compounds based on heavy transition metal complexes (TMCs) are an appealing research topic of enormous current interest. Amongst all different fields in which they found valuable application, development of emitting materials based on TMCs have become crucial for electroluminescent devices such as phosphorescent organic light-emitting diodes (PhOLEDs) and light-emitting electrochemical cells (LEECs). This interest is driven by the fact that luminescent TMCs with long-lived excited state lifetimes are able to efficiently harvest both singlet and triplet electro-generated excitons, thus opening the possibility to achieve theoretically 100% internal quantum efficiency in such devices. In the recent past, various classes of compounds have been reported, possessing a beautiful structural variety that allowed to nicely obtain efficient photo- and electroluminescence with high colour purity in the red, green and blue (RGB) portions of the visible spectrum. In addition, achievement of efficient emission beyond such range towards ultraviolet (UV) and near infrared (NIR) regions was also challenged. By employing TMCs as triplet emitters in OLEDs, remarkably high device performances were demonstrated, with square planar platinum(II) complexes bearing π-conjugated chromophoric ligands playing a key role in such respect. In this contribution, the most recent and promising trends in the field of phosphorescent platinum complexes will be reviewed and discussed. In particular, the importance of proper molecular design that underpins the successful achievement of improved photophysical features and enhanced device performances will be highlighted. Special emphasis will be devoted to those recent systems that have been employed as triplet emitters in efficient PhOLEDs.

Achieving High-Performance Solution-Processed Orange OLEDs with the Phosphorescent Cyclometalated Trinuclear Pt(II) Complex

Cyclometalated Pt(II) complexes can show intense phosphorescence at room temperature. Their emission properties are determined by both the organic ligand and the metal center. Whereas most of the related studies focus on tuning the properties by designing different types of organic ligands, only several reports investigate the key role played by the metal center. To address this issue, phosphorescent Pt(II) complexes with one, two, and three Pt(II) centers are designed and synthesized. With more Pt(II) centers, the cyclometalated multinuclear Pt(II) complexes display red-shifted emissions with increased photoluminescence quantum yields. Most importantly, solution-processed organic light-emitting diodes (OLEDs) with the conventional device structure using the multinuclear Pt(II) complexes as emitters show excellent performance. The controlled device based on the conventional mononuclear Pt(II) complex shows a peak external quantum efficiency, current efficiency, and power efficiency of 6.4%, 14.4 cd A^-1, and 12.1 lm W^-1, respectively. The efficiencies are dramatically improved to 10.5%, 21.4 cd A^-1, and 12.9 lm W^-1 for the OLED based on the dinuclear Pt(II) complex and to 17.0%, 35.4 cd A^-1, and 27.2 lm W^-1 for the OLED based on the trinuclear Pt(II) complex, respectively. To the best of our knowledge, these efficiencies are among the highest ever reported for the multinuclear Pt(II) complex-based OLEDs.

Metal-organic framework composites with luminescent pincer platinum(ii) complexes: 3MMLCT emission and photoinduced dehydrogenation catalysis

Pincer platinum(ii) complexes are well documented to exhibit weak intermolecular interactions in the solid state and 77 K glassy solutions, leading to emissive triplet metal-metal-to-ligand charge transfer (3MMLCT) excited states that often vanish in dilute solutions. In this work, metal-organic framework (MOF) materials are introduced to provide a "solid solution" environment for easy access to 3MMLCT excited states of pincer platinum(ii) complexes. Phosphorescent composites PtII@MOFs (1-4) with matrix-dependent monomers and oligomer emission properties were obtained. These PtII@MOFs are efficient catalysts for photoinduced dehydrogenation reactions.

The effect of the embedded o-carborane ligand on the photophysical properties of a cyclometalated Pt(ii) complex: a theoretical investigation

The embedded o-carborane ligands will have an impact on the photophysical properties and quantum efficiency of these highly efficient blue phosphorescent materials.

A rapidly-reversible absorptive and emissive vapochromic Pt(II) pincer-based chemical sensor

Selective, robust and cost-effective chemical sensors for detecting small volatile-organic compounds (VOCs) have widespread applications in industry, healthcare and environmental monitoring. Here we design a Pt(II) pincer-type material with selective absorptive and emissive responses to methanol and water. The yellow anhydrous form converts reversibly on a subsecond timescale to a red hydrate in the presence of parts-per-thousand levels of atmospheric water vapour. Exposure to methanol induces a similarly-rapid and reversible colour change to a blue methanol solvate. Stable smart coatings on glass demonstrate robust switching over 10⁴ cycles, and flexible microporous polymer membranes incorporating microcrystals of the complex show identical vapochromic behaviour. The rapid vapochromic response can be rationalised from the crystal structure, and in combination with quantum-chemical modelling, we provide a complete microscopic picture of the switching mechanism. We discuss how this multiscale design approach can be used to obtain new compounds with tailored VOC selectivity and spectral responses.

Direct Observation of an Efficient Triplet Exciton Diffusion Process in a Platinum-Containing Conjugated Polymer

We report the synthesis and characterization of a conjugated polymer incorporated with cyclometalated platinum complexes on the main chain. The polymer may serve as an efficient triplet sensitizer in light-harvesting systems. The photophysical properties of the polymer were studied by nanosecond and femtosecond time-resolved transient absorption spectroscopies. After excitation, an energy-transfer process from the thiophene units on the conjugated main chain to the singlet excited state of the Pt complex moieties occurred in less than 150 fs. The subsequent intersystem crossing process resulted in the formation of a triplet excited state at the Pt complex moieties in ∼3.2 ps, which was then followed by an efficient triplet diffusion process that led to the formation of triplet excitons on the polymer main chain in ∼283 ps. This proposed efficient triplet sensitized polymer system not only enhances the exciton diffusion length but also reduces energy loss in the process, which displays remarkable implications in the design of novel materials for triplet sensitized solar cells.

Fluorescent Supramolecular Polymeric Materials

Fluorescent supramolecular polymeric materials are rising stars in the field of fluorescent materials not only because of the inherent optoelectronic properties originating from their chromophores, but also due to the fascinating stimuli-responsiveness and reversibility coming from their noncovalent connections. Especially, these noncovalent connections influence the fluorescence properties of the chromophores because their state of aggregation and energy transfer can be regulated by the assembly-disassembly process. Considering these unique properties, fluorescent supramolecular polymeric materials have facilitated the evolution of new materials useful for applications in fluorescent sensors, probes, as imaging agents in biological systems, light-emitting diodes, and organic electronic devices. In this Review, fluorescent supramolecular polymeric materials are classified depending on the types of main driving forces for supramolecular polymerization, including multiple hydrogen bonding, electrostatic interactions, π-π stacking interactions, metal-coordination, van der Waals interactions and host-guest interactions. Through the summary of the studies about fluorescent supramolecular polymeric materials, the status quo of this research field is assessed. Based on existing challenges, directions for the future development of this field are furnished.

Silver(I) Complexes of Diphenylpyridines: Crystal Structures, Luminescence Studies, Theoretical Insights, and Biological Activities

A series of simple two-coordinated cationic silver(I) complexes, namely, [Ag{4-(4-R¹ -phenyl)-2,6-diphenylpyridine}₂ ]X (X=ClO₄ ^- , BF₄ ^- , or SO₃ CF₃ ^- ), with different electron-donating or -withdrawing groups (e.g., R¹ =N(Me)₂ , Me, H, Cl, and Br) on the phenyl ring, were successfully prepared. Extensive characterization of these complexes by various NMR spectroscopy techniques and mass spectrometry was further corroborated by single-crystal XRD analyses. Detailed photophysical investigations of [Ag{4-(4-N,N-dimethylaminophenyl)-2,6-diphenylpyridine}₂ ]ClO₄ (C1) displayed a strong room-temperature fluorescence in solution with an anomalously high luminescence quantum yield of 0.83. The effects of distinct substituent groups (C2-C5), π-conjugated aromatic rings (C6 and C7), and anions (C8 and C9) on the photoluminescence properties were evaluated. Furthermore, DFT and time-dependent DFT calculations were performed to discern the composition of the excited state, as well as to confirm the obtained relative emission energies upon substitution with electronically different ligands. These results indicated that the strong electron-donating substituent of N,N-dimethylamine played an important role in the unprecedented high luminescence quantum yield of C1. In addition, preliminary antimicrobial studies and confocal microscopy fluorescent imaging of HeLa cells labeled with these complexes reveal their potential applications in biological activities.

Synthesis, crystal structure, photophysical property and metal ion-binding behavior of a cyclometalated platinum(ii) terpyridylacetylide with efficient π-conjugation degree

The “Donor–Phosphore–Receptor” platform as a novel building block for formation of heterotrinuclear transition metal complexes.

Platinum and Gold Complexes for OLEDs

Encouraging efforts on the design of high-performance organic materials and smart architecture during the past two decades have made organic light-emitting device (OLED) technology an important competitor for the existing liquid crystal displays. Particularly, the development of phosphorescent materials based on transition metals plays a crucial role for this success. Apart from the extensively studied iridium(III) complexes with d(6) electronic configuration and octahedral geometry, the coordination-unsaturated nature of d(8) transition metal complexes with square-planar structures has been found to provide intriguing spectroscopic and luminescence properties. This article briefly summarizes the development of d(8) platinum(II) and gold(III) complexes and their application studies in the fabrication of phosphorescent OLEDs. An in-depth understanding of the nature of the excited states has offered a great opportunity to fine-tune the emission colors covering the entire visible spectrum as well as to improve their photophysical properties. With good device engineering, high performance vacuum-deposited OLEDs with external quantum efficiencies (EQEs) of up to 30 % and solution-processable OLEDs with EQEs of up to 10 % have been realized by modifying the cyclometalated or pincer ligands of these metal complexes. These impressive demonstrations reveal that d(8) metal complexes are promising candidates as phosphorescent materials for OLED applications in displays as well as in solid-state lighting in the future.

Highly phosphorescent platinum(ii) emitters: photophysics, materials and biological applications

In recent years a blossoming interest in the synthesis, photophysics and application of phosphorescent Pt(ii) complexes, particularly on their uses in bioimaging, photocatalysis and phosphorescent organic light-emitting diodes (OLEDs), has been witnessed. The superior performance of phosphorescent Pt(ii) complexes in these applications is linked to their diverse spectroscopic and photophysical properties, which can be systematically modulated by appropriate choices of auxiliary ligands. Meanwhile, an important criterion for the practical application of phosphorescent metal complexes is their stability which is crucial for biological utilization and industrial OLED applications. Taking both the luminescence properties and stability into consideration, chelating ligands having rigid scaffolds and with strong σ-donor atoms are advantageous for the construction of highly robust phosphorescent Pt(ii) complexes. The square-planar coordination geometry endows Pt(ii) complexes with the intriguing spectroscopic and photophysical properties associated with their intermolecular interactions in both the ground and excited states. In this article, we discuss the design and synthesis of phosphorescent Pt(ii) complexes with elaboration on the effects of ligands on the structure and luminescence properties. Based on their photophysical and emission properties, we intend to shed light on the great promise of highly robust phosphorescent Pt(ii) emitters in an array of applications from molecular materials to biosensors.

A highly-efficient blue-light excitable red phosphor: intramolecular π-stacking interactions in one dinuclear europium(iii) complex

A series of ternary dinuclear europium(iii) complexes [Eu2(2,7-BTFDBC)3-n(DBM)2n(Phen)2] (n = 0, 1, or 2) were synthesized by using 2,7-bis(4'4'4'-trifluoro-1,3-dioxobutyl)-(9-ethyl-9H-carbazole) (2,7-BTFDBC), dibenzoylmethane (DBM), 1,10-phenanthroline (Phen) and europium(iii) ions. All these complexes display a broad excitation band in the blue region and high intensity emission with high colour purity. The intensity of emission significantly increases with the increase of DBM in [Eu2(2,7-BTFDBC)3-n(DBM)2n(Phen)2] (n = 0, 1, or 2). The theoretical predictions of the molecular geometry and electronic absorption spectrum of [Eu2(2,7-BTFDBC)(DBM)4(Phen)2] confirm that the pendant phenyl domains engage in multiple T-shaped and parallel-displaced π-stacking interactions with the coordination sphere of two europium(iii) centers. Using [Eu2(2,7-BTFDBC)(DBM)4(Phen)2] as a red phosphor, a single red LED has been obtained with a ∼460 nm-emitting GaN chip.