Cationic Dialkyl Metal Compounds of Group 13 Elements (E = Al, Ga, In) Stabilized by the Weakly Coordinating Dianion [B12Cl12]2–

Derivatization of Undecahalogenated closo-Dodecaborates [B12X11NH3]- (X = F-I): Attaching Isocyanate, Amidinium, and Formamide Functionalities

Halogenated closo-dodecaborates are very robust and versatile weakly coordinating anions for numerous applications. The introduction of additional substituents, e.g., pseudohalides, allows the tuning of their chemical and physical properties. In this report, the synthesis of the isocyanate-substituted closo-dodecaborates [B12X11(NCO)]2- (X = H, F-I) was investigated. In an attempt to synthesize the undecahalogenated derivatives, a selective and halogen-dependent reaction yielding boron clusters carrying the functional groups amidinium (-NHCHNMe2) and formamide (-NHC(O)H) was discovered. The halogenated anions were fully characterized by vibrational and NMR spectroscopy, mass spectrometry, and X-ray diffraction. Salts of the formamide-substituted anion [B12X11(NHC(O)H)]2- are surprisingly thermally stable in the condensed phase. In contrast, collision-induced dissociation in the gas phase reveals that the isolated dianion [B12X11(NHC(O)H)]2- in the gas phase preferentially loses water, while the protonated form, which was generated from decomposition of the tetraalkylammonium counterion [B12X11(NHC(O)H)H]-, tends to lose carbon monoxide. Possible reaction mechanisms are discussed.

Synthesis of High-Molecular-Weight Poly(ether-alt-ester) by Selective Double Ring-Opening Polymerization of Spiroorthoesters

We report the selective double ring-opening polymerization of presequenced spiroorthoester monomers to form high-molecular-weight (≈90 kDa) poly(ether-alt-ester)s with a simple cationic alkyl gallium catalyst. The selective formation of double ring-opened polymer units was confirmed by NMR and IR spectroscopies. Thermal and rheological properties of homo- and copolymers were further characterized by differential scanning calorimetry, thermogravimetric analysis, and stress-controlled rotational rheometry. Linear viscoelastic moduli show that these systems are well entangled (plateau modulus), thereby possessing nearly terminal relaxation at long time scales (low frequencies) and Rouse segmental dynamics at short time scales (high frequencies) with characteristic slopes. These are the highest-molecular-weight poly(ether-alt-ester)s reported to date.

Supramolecular Cu(ii)–dipyridyl frameworks featuring weakly coordinating dodecaborate dianions for selective gas separation

Several novel weakly coordinating dodecaborate anion hybrid supramolecular Cu(ii)–dipyridyl frameworks were synthesized and characterized by single crystal analysis with one potential for selective C₂H₂/C₂H₄ and C₂H₂/CO₂ separation.

Synthesis, Electronic Properties and Reactivity of [B12 X11 (NO2 )]2- (X=F-I) Dianions

Nitro‐functionalized undecahalogenated closo‐dodecaborates [B₁₂X₁₁(NO₂)]²⁻ were synthesized in high purities and characterized by NMR, IR, and Raman spectroscopy, single crystal X‐diffraction, mass spectrometry, and gas‐phase ion vibrational spectroscopy. The NO₂ substituent leads to an enhanced electronic and electrochemical stability compared to the parent perhalogenated [B₁₂X₁₂]²⁻ (X=F–I) dianions evidenced by photoelectron spectroscopy, cyclic voltammetry, and quantum‐chemical calculations. The stabilizing effect decreases from X=F to X=I. Thermogravimetric measurements of the salts indicate the loss of the nitric oxide radical (NO^.). The homolytic NO^. elimination from the dianion under very soft collisional excitation in gas‐phase ion experiments results in the formation of the radical [B₁₂X₁₁O]^2−.. Theoretical investigations suggest that the loss of NO^. proceeds via the rearrangement product [B₁₂X₁₁(ONO)]²⁻. The O‐bonded nitrosooxy structure is thermodynamically more stable than the N‐bonded nitro structure and its formation by radical recombination of [B₁₂X₁₁O]^2−. and NO^. is demonstrated.

Properties of gaseous closo-[B6X6]2- dianions (X = Cl, Br, I)

Electronic structure, collision-induced dissociation (CID) and bond properties of closo-[B₆X₆]^2- (X = Cl-I) are investigated in direct comparison with their closo-[B₁₂X₁₂]^2- analogues. Photoelectron spectroscopy (PES) and theoretical investigations reveal that [B₆X₆]^2- dianions are electronically significantly less stable than the corresponding [B₁₂X₁₂]^2- species. Although [B₆Cl₆]^2- is slightly electronically unstable, [B₆Br₆]^2- and [B₆I₆]^2- are intrinsically stable dianions. Consistent with the trend in the electron detachment energy, loss of an electron (e^- loss) is observed in CID of [B₆X₆]^2- (X = Cl, Br) but not for [B₆I₆]^2-. Halogenide loss (X^- loss) is common for [B₆X₆]^2- (X = Br, I) and [B₁₂X₁₂]^2- (X = Cl, Br, I). Meanwhile, X˙ loss is only observed for [B₁₂X₁₂]^2- (X = Br, I) species. The calculated reaction enthalpies of the three competing dissociation pathways (e^-, X^- and X˙ loss) indicated a strong influence of kinetic factors on the observed fragmentation patterns. The repulsive Coulomb barrier (RCB) determines the transition state for the e^- and X^- losses. A significantly lower RCB for X^- loss than for e^- loss was found in both experimental and theoretical investigations and can be rationalized by the recently introduced concept of electrophilic anions. The positive reaction enthalpies for X^- losses are significantly lower for [B₆X₆]^2- than for [B₁₂X₁₂]^2-, while enthalpies for X˙ losses are higher. These observations are consistent with a difference in bond character of the B-X bonds in [B₆X₆]^2- and [B₁₂X₁₂]^2-. A complementary bonding analysis using QTAIM, NPA and ELI-D based methods suggests that B-X bonds in [B₁₂X₁₂]^2- have a stronger covalent character than in [B₆X₆]^2-, in which X has a stronger halide character.

A transition metal–gallium cluster formed via insertion of “GaI”

Synthesis of a new transition metal-group 13 cluster from a low-coordinate diaryl and “GaI”, demonstrates entry into new cluster compounds.

Organoaluminum cations for carbonyl activation

In search of stable, yet reactive aluminum Lewis acids, we have isolated an organoaluminum cation, [(Me2NC6H4)2Al(C4H8O)2]+, coordinated with two labile tetrahydrofuran ligands. Its catalytic performance in aldehyde dimerization reveals turn-over frequencies reaching up to 6000 h-1, exceeding that of the reported main group catalysts. The cation is further demonstrated to catalyze hydroelementation of ketones. Mechanistic investigations reveal that aldehyde dimerization and ketone hydrosilylation occur through carbonyl activation.

Photooxidative Generation of Dodecaborate-Based Weakly Coordinating Anions

Redox-active proanions of the type B₁₂(OCH₂Ar)₁₂ [Ar = C₆F₅ (1), 4-CF₃C₆H₄ (2), 3,5-(CF₃)₂C₆H₃ (3)] are introduced in the context of an experimental and computational study of the visible-light-initiated polymerization of a family of styrenes. Neutral, air-stable proanions 1-3 were found to initiate styrene polymerization through single-electron oxidation under blue-light irradiation, resulting in polymers with number-average molecular weights (M_n) ranging from ∼6 to 100 kDa. Shorter polymer products were observed in the majority of experiments, except in the case of monomers containing 4-X (X = F, Cl, Br) substituents on the styrene monomer when polymerized in the presence of 1 in CH₂Cl₂. Only under these specific conditions are longer polymers (>100 kDa) observed, strongly supporting the formulation that reaction conditions significantly modulate the degree of ion pairing between the dodecaborate anion and cationic chain end. This also suggests that 1-3 behave as weakly coordinating anions (WCA) upon one-electron reduction because no incorporation of the cluster-based photoinitiators is observed in the polymeric products analyzed. Overall, this work is a conceptual realization of a single reagent that can serve as a strong photooxidant, subsequently forming a WCA.

Oxygen-Bridged Ga2 (Et)3 (OTeF5 )3 and the Weakly Coordinating Anions [Ga(Et)(OTeF5 )3 ]- and [Ga(OTeF5 )4 ]. Chemistry 2019;25:10441-10449. [PMID: 31090983 DOI: 10.1002/chem.201901651]

Salts of the weakly coordinating anions [Ga(OTeF₅ )₄ ]^- as well as [Ga(Et)(OTeF₅ )₃ ]^- and the neutral Ga₂ (Et)₃ (OTeF₅ )₃ were synthesized and characterized by spectroscopic methods and single-crystal X-ray diffraction. Ga₂ (Et)₃ (OTeF₅ )₃ was formed by treating GaEt₃ with pentafluoroorthotelluric acid (HOTeF₅ ) and reacted with PPh₄ Cl and CPh₃ Cl to [PPh₄ ][Ga(Et)(OTeF₅ )₃ ] and [CPh₃ ][Ga(Et)(OTeF₅ )₃ ]. In contrast, Ag[Ga(OTeF₅ )₄ ] was prepared from AgOTeF₅ and GaCl₃ and was used as a versatile starting material for further reactions. Starting with Ag[Ga(OTeF₅ )₄ ] the substrates [PPh₄ ][Ga(OTeF₅ )₄ ] and [CPh₃ ][Ga(OTeF₅ )₄ ] were formed from PPh₄ Cl and CPh₃ Cl.

Cationic Complexes of Boron and Aluminum: An Early 21st Century Viewpoint

Boron and aluminum are lighter Group 13 elements, found in daily life commodities, and considered environmentally benign. Nevertheless, they markedly differ in their elemental properties (e.g., metal character, atomic radius). The use of Lewis acidic complexes of boron and aluminum for methods of bond activation and catalysis (e.g., hydrogenation of unsaturated substrates, polymerization of olefins and epoxides) is quickly expanding. The introduction of cationic charge may boost the metalloid-centered Lewis acidity and allow for its fine-tuning particularly with regard to preference for "hard" or "soft" Lewis bases (i.e., substrates). Especially the isolation of low-coordinate cations (number of ligand atoms smaller than four) demands elaborate techniques of thermodynamic and kinetic stabilization (i.e., electronic saturation and steric shielding) by a ligand system. Furthermore, the properties of the solvent and the counteranion must be considered with care. Here, selected examples of boron and aluminum cations are described.

Taming the Cationic Beast: Novel Developments in the Synthesis and Application of Weakly Coordinating Anions

This Review gives a comprehensive overview of the most topical weakly coordinating anions (WCAs) and contains information on WCA design, stability, and applications. As an update to the 2004 review, developments in common classes of WCA are included. Methods for the incorporation of WCAs into a given system are discussed and advice given on how to best choose a method for the introduction of a particular WCA. A series of starting materials for a large number of WCA precursors and references are tabulated as a useful resource when looking for procedures to prepare WCAs. Furthermore, a collection of scales that allow the performance of a WCA, or its underlying Lewis acid, to be judged is collated with some advice on how to use them. The examples chosen to illustrate WCA developments are taken from a broad selection of topics where WCAs play a role. In addition a section focusing on transition metal and catalysis applications as well as supporting electrolytes is also included.

Synthesis and Applications of Perfunctionalized Boron Clusters

This Viewpoint describes major advances pertaining to perfunctionalized boron clusters in synthesis and their respective applications. The first portion of this work highlights key synthetic methods, allowing one to access a wide range of polyhedral boranes (B4 and B6-B12 cluster cores) that contain exhaustively functionalized vertices. The second portion of this Viewpoint showcases the historical developments in using these molecules for applications ranging from materials science to medicine. Last, we suggest potential new directions for these clusters as they apply to both synthetic methods and applications.

Superelectrophilic Behavior of an Anion Demonstrated by the Spontaneous Binding of Noble Gases to [B12 Cl11 ]<sup/>

It is common and chemically intuitive to assign cations electrophilic and anions nucleophilic reactivity, respectively. Herein, we demonstrate a striking violation of this concept: The anion [B₁₂ Cl₁₁ ]^- spontaneously binds to the noble gases (Ngs) xenon and krypton at room temperature in a reaction that is typical of "superelectrophilic" dications. [B₁₂ Cl₁₁ Ng]^- adducts, with Ng binding energies of 80 to 100 kJ mol^-1 , contain B-Ng bonds with a substantial degree of covalent interaction. The electrophilic nature of the [B₁₂ Cl₁₁ ]^- anion is confirmed spectroscopically by the observation of a blue shift of the CO stretching mode in the IR spectrum of [B₁₂ Cl₁₁ CO]^- and theoretically by investigation of its electronic structure. The orientation of the electric field at the reactive site of [B₁₂ Cl₁₁ ]^- results in an energy barrier for the approach of polar molecules and facilitates the formation of Ng adducts that are not detected with reactive cations such as [C₆ H₅ ]⁺ . This introduces the new chemical concept of "dipole-discriminating electrophilic anions."

Unexpected alkane elimination from cationic group 13 dialkyls in a reaction with a macrocyclic polyamine

A macrocyclic polyamine 1,4,7-trimethyl-1,4,7,10-tetraazacyclododecane, (Me₃TACD)H formed thermally stable adducts with MR₃ (M = Al, In) but released RH from reactions with [MR₂]⁺.

Evidence for an intrinsic binding force between dodecaborate dianions and receptors with hydrophobic binding pockets

A gas phase binding study revealed strong intrinsic intermolecular interactions between dianionic halogenated closo-dodecaborates [B12X12](2-) and several neutral organic receptors. Oxidation of a tetrathiafulvalene host allowed switching between two host-guest binding modes in a supramolecular complex. Complexes of β-cyclodextrin with [B12F12](2-) show remarkable stability in the gas phase and were successfully tested as carriers for the delivery of boron clusters into cancer cells.

Reactive p-block cations stabilized by weakly coordinating anions

The chemistry of the p-block elements is a huge playground for fundamental and applied work. With their bonding from electron deficient to hypercoordinate and formally hypervalent, the p-block elements represent an area to find terra incognita. Often, the formation of cations that contain p-block elements as central ingredient is desired, for example to make a compound more Lewis acidic for an application or simply to prove an idea. This review has collected the reactive p-block cations (rPBC) with a comprehensive focus on those that have been published since the year 2000, but including the milestones and key citations of earlier work. We include an overview on the weakly coordinating anions (WCAs) used to stabilize the rPBC and give an overview to WCA selection, ionization strategies for rPBC-formation and finally list the rPBC ordered in their respective group from 13 to 18. However, typical, often more organic ion classes that constitute for example ionic liquids (imidazolium, ammonium, etc.) were omitted, as were those that do not fulfill the - naturally subjective -"reactive"-criterion of the rPBC. As a rule, we only included rPBC with crystal structure and only rarely refer to important cations published without crystal structure. This collection is intended for those who are simply interested what has been done or what is possible, as well as those who seek advice on preparative issues, up to people having a certain application in mind, where the knowledge on the existence of a rPBC that might play a role as an intermediate or active center may be useful.

Alkoxy substituted halogenated closo-dodecaborates as anions for ionic liquids

Halogenated and alkoxylated closo-dodecaborates [B12X11OR](2-) (X = Cl, Br; R = propyl, octyl, dodecyl) have been synthesized by halogenation of the known [B12H11OH](2-) anion followed by alkylation in the superbasic medium DMSO/KOH. The obtained sodium salts were transformed by simple metathesis reactions in aqueous solution to the tetrabutylammonium ([NBu4](+)) and 1-hexyl-3-methylimidazolium ([C6mim](+)) salts. All compounds were fully characterized by heteronuclear NMR, IR and Raman spectroscopy, ESI mass spectrometry, and thermal analytical measurements. Selected anions were also structurally characterized as their [Ph4P](+) salts by single crystal X-ray diffraction. The [C6mim](+) salts are thermally stable up to more than 300 °C and show clear melting points. Surprisingly, the compound [C6mim]2[B12Cl11O-propyl] having the short propyl group bound to the boron cluster shows the lowest melting point (96 °C) of all the investigated compounds. Thus this compound is a rare member of the class of ionic liquids consisting of dianions.

Protic anions [H(B12X12)]- (X = F, Cl, Br, I) that act as Brønsted acids in the gas phase

The acidity of protic cations and neutral molecules has been studied extensively in the gas phase, and the gas-phase acidity has been established previously as a very useful measure of the intrinsic acidity of neutral and cationic compounds. However, no data for any anionic acids were available prior to this study. The protic anions [H(B12X12)](-) (X = F, Cl, Br, I) are expected to be the most acidic anions known to date. Therefore, they were investigated in this study with respect to their ability to protonate neutral molecules in the gas phase by using a combination of mass spectrometry and quantum-chemical calculations. For the first time it was shown that in the gas phase protic anions are also able to protonate neutral molecules and thus act as Brønsted acids. According to theoretical calculations, [H(B12I12)](-) is the most acidic gas-phase anion, whereas in actual protonation experiments [H(B12Cl12)](-) is the most potent gas-phase acidic anion for the protonation of neutral molecules. This discrepancy is explained by ion pairing and kinetic effects.

Synthesis, structural studies and ligand influence on the stability of aryl-NHC stabilised trimethylaluminium complexes

Treatment of a series of aromatic NHCs with trimethylaluminium produced their corresponding NHC·AlMe₃ adducts displaying different stabilities. Their stabilities are rationalized using topographic steric maps and NHC % V Bur.