Indium Complexes of Fluorinated Dialkoxy-Diimino Salen-like Ligands for Ring-Opening Polymerization of rac-Lactide: How Does Indium Compare to Aluminum?

Exploiting Multimetallic Cooperativity in the Ring-Opening Polymerization of Cyclic Esters and Ethers

The use of multimetallic complexes is a rapidly advancing route to enhance catalyst performance in the ring-opening polymerization of cyclic esters and ethers. Multimetallic catalysts often outperform their monometallic analogues in terms of reactivity and/or polymerization control, and these improvements are typically attributed to "multimetallic cooperativity". Yet the origins of multimetallic cooperativity often remain unclear. This review explores the key factors underpinning multimetallic cooperativity, including metal-metal distances, the flexibility, electronics and conformation of the ligand framework, and the coordination environment of the metal centers. Emerging trends are discussed to provide insights into why cooperativity occurs and how to harness cooperativity for the development of highly efficient multimetallic catalysts.

Metal Complexes in the Synthesis of Biodegradable Polymers: Achievements and Prospects

This review describes recent advances in the synthesis of homopolymers of lactide and related cyclic esters via ring-opening polymerization (ROP) in the presence of metal complexes based on group 1, 2, 4, 12, 13 and 14 metals. Particular attention is paid to the influence of the initiator structure on the properties of the obtaining homo- and copolymers. Also, a separate chapter is devoted to the study of metal complexes in the synthesis of copolymers of lactide and lactones. This review highlights the efforts made over the last ten years or so, and shows how main-group metals have received increasing attention in the field of the polymerization of lactide and related cyclic esters.

Development of Heterobimetallic Al/Mg Complexes for the Very Rapid Ring-Opening Polymerization of Lactides

The successful architecture of active catalytic species with enhanced efficiencies is critical for the optimal exploitation of sustainable resources in industrially demanded processes. In this work, we describe the preparation of novel helical heterobimetallic Al/Mg-based complexes of the type [AlMe2(pbpamd-)MgR{κ1-O-(OC4H8O)}] [R = Et (1a), tBu (2a)] as potential catalysts. The design was performed through the sequential addition of the Al fragment to the ligand, followed by the Mg platform, resulting in a planar π-C2N2(sp2)-Al/Mg bridging core between metals. The new heterobimetallic species have been unambiguously characterized by single-crystal X-ray analysis. NOESY, DOSY, and EXSY NMR studies as well as density functional theory calculations corroborate both a rearrangement in solution to scorpionate complexes containing an unprecedented apical carbanion with a direct σ-C(sp3)-Al covalent bond named [{Mg(R)(pbpamd-) Al(Me)2}] [R = Et (1b), tBu (2b)] and an interconversion equilibrium between both isomers. We verified their utility and high efficiency as catalysts in the well-controlled ring-opening polymerization of the biorenewable l- and rac-lactide (LA) at 23 °C, reaching a remarkable turnover frequency value close to 25000 h-1 for rac-LA at this temperature and exerting a significant level of heteroselectivity (Pr = 0.80). Very interestingly, the kinetics demonstrate apparent first-order with respect to the catalyst and LA, which supports a synergic intramolecular cooperation between centers with electronic modulation among them.

Simple Zn(ii) complexes for the production and degradation of polyesters

Nine new complexes based on thioether appended iminophenolate (ONS) ligands have been prepared and fully characterized in solution by NMR spectroscopy. Solid-state structures were also obtained for seven complexes. In solution, all complexes were monomeric. The complexes were highly active for the polymerization of purified rac-lactide ([M] : [Zn] : [BnOH] = 10 000 : 1 : 30 at 180 °C) reaching TOF values up to 250 000 h-1. The kinetics of the polymerization have been probed by in situ Raman spectroscopy. The rate of reaction was dramatically reduced using technical grade rac-lactide with increased initiator loading. To move towards a circular economy, it is vital that catalysts are developed to facilitate chemical recycling of commodity and emerging polymeric materials. In this vein, the complexes have been assessed for their ability to break down poly(lactic acid) and poly(ethylene terephthalate). The results from both the polymerization and degradation reactions are discussed in terms of ligand functionality.

Use of group 13 aryloxides for the synthesis of green chemicals and oxide materials

In this work, group 13 metal aryloxides [Al(MesalO)3] (1), [Me2Ga(MesalO)]2 (2), [AlLi3(MesalO)6] (3) and [Me2GaLi(MesalO)2(THF)] (4), were obtained by reaction of methyl salicylate (MesalOH) with group-13 alkyls MMe3 (for M...

Heterometallic cooperativity in divalent metal ProPhenol catalysts: combining zinc with magnesium or calcium for cyclic ester ring-opening polymerisation

The first heterobimetallic lactide ROP catalysts based on two divalent metals outperform the homobimetallic analogues, attributed to the increased Lewis acidity of Mg or Ca (monomer coordination) and enhanced polarity of Zn–Et/OR (propagation).

Advances in heterometallic ring-opening (co)polymerisation catalysis

Truly sustainable plastics require renewable feedstocks coupled with efficient production and end-of-life degradation/recycling processes. Some of the most useful degradable materials are aliphatic polyesters, polycarbonates and polyamides, which are often prepared via ring-opening (co)polymerisation (RO(CO)P) using an organometallic catalyst. While there has been extensive research into ligand development, heterometallic cooperativity offers an equally promising yet underexplored strategy to improve catalyst performance, as heterometallic catalysts often exhibit significant activity and selectivity enhancements compared to their homometallic counterparts. This review describes advances in heterometallic RO(CO)P catalyst design, highlighting the overarching structure-activity trends and reactivity patterns to inform future catalyst design.

Ring-opening polymerisation of l- and rac-lactide using group 4 permethylpentalene aryloxides and alkoxides

A new family of group 4 permethylpentalene (C₈Me₆^2-; Pn*) aryloxide and alkoxide complexes have been synthesised and fully characterised by multinuclear NMR spectroscopy and single-crystal X-ray diffraction; (η⁸-C₈Me₆)Zr(OR)₂ (R = ^tBu (1), 2,6-Me-C₆H₃ (2), 2,6-ⁱPr-C₆H₃ (3) and 4-OMe-C₆H₄ (4)), (η⁸-C₈Me₆)Zr (OR) (R = 2,6-^tBu-C₆H₃ (5) and 2,6-^tBu-4-Me-C₆H₂ (6)), (η⁸-C₈Me₆)ZrCp(OR) (R = ^tBu (7), 2,6-Me-C₆H₃ (8) and 2,6-ⁱPr-C₆H₃ (9)), (η⁸-C₈Me₆)TiCp(O-2,6-Me-C₆H₃) (10) and (η⁸-C₈Me₆)ZrCp^Me(OR) (R = 2,6-Me-C₆H₃ (11), 2,6-ⁱPr-C₆H₃ (12) and 2,4-^tBu-C₆H₃ (13)). 2, 3, 6, 7, 9, 10 and 12 were studied as initiators for the ring-opening polymerisation (ROP) of l-lactide, and 2, 3, 6, 7 and 10 were studied as initiators for the ROP of rac-lactide. 3 was found to be the most active initiator for the ROP of l-lactide (k_obs = 0.35 h^-1) and 2 for the ROP of rac-lactide (k_obs = 0.21 h^-1). These initiators produced isotactic PLA for the ROP of l-lactide and moderately heterotactic enriched (maximum P_r of 0.69) or atactic PLA for the ROP of rac-lactide with polymer chains consisting of polylactic acid repeat units with -OR and -OH end groups.

Isoselective Polymerization of rac-Lactide by Aluminum Complexes of N-Heterocyclic Carbene-Phosphinidene Adducts

The N-heterocyclic carbene-phosphinidene adducts (NHC)PH were reacted with AlMe3 in toluene to afford the monoaluminum complexes [{(IDipp)PH}AlMe3 ] and [{(IMes)PH}AlMe3 ] (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, IMes=1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). In contrast, the dialuminum complex [{(Me IMes)PH}(AlMe3 )2 ] was obtained for Me IMes=1,3-bis(2,4,6-trimethylphenyl)-4,5-dimethylimidazolin-2-ylidene. These complexes served as initiators for the efficient ring-opening polymerization of rac-lactide in toluene at 60 °C. High degrees of isoselectivity were found for the poly(rac-lactide) obtained in the presence of the monoaluminum complexes (Pm up to 0.92, Tm up to 191 °C), whereas almost atactic polymers were produced by the dialuminum complex. Detailed mechanistic studies reveal that the polymerization proceeds via a coordination-insertion mechanism with the carbene-phosphinidene ligands acting as stereodirecting groups.

Combining alkali metals and zinc to harness heterometallic cooperativity in cyclic ester ring-opening polymerisation

Heterometallic cooperativity is an emerging strategy to elevate polymerisation catalyst performance. Here, we report the first heterotrimetallic Na/Zn₂ and K/Zn₂ complexes supported by a ProPhenol ligand, which deliver “best of both” in cyclic ester ring-opening polymerisation, combining the outstanding activity (Na/K) and good control (Zn₂) of homometallic analogues. Detailed NMR studies and density-functional theory calculations suggest that the Na/Zn₂ and K/Zn₂ complexes retain their heterometallic structures in the solution-state. To the best of our knowledge, the K/Zn₂ analogue is the most active heterometallic catalyst reported for rac-lactide polymerisation (k_obs = 1.7 × 10⁻² s⁻¹), giving activities five times faster than the Na/Zn₂ complex. These versatile catalysts also display outstanding performance in ε-caprolatone and δ-valerolactone ring-opening polymerisation. These studies provide underpinning methodologies for future heterometallic polymerisation catalyst design, both in cyclic ester polymerisation and other ring-opening (co)polymerisation reactions.

Cooperative heterotrimetallic Na/Zn₂ and K/Zn₂ complexes combine the excellent activities and control of the homometallic analogues, giving “best of both” in cyclic ester ring-opening polymerisation.

Active Ga-catalysts for the ring opening homo- and copolymerization of cyclic esters, and copolymerization of epoxide and anhydrides

A series of gallium complexes L12Ga4Me8 (1), L22Ga4Me8 (2), and L32Ga4Me8 (3) was synthesized by reaction of GaMe3 with Schiff base ligands L1-3H2 (L1H2 = 2,4-di-tert-butyl-6-{[(3-hydroxypropyl)imino]methyl}phenol; L2H2 = 2,4-dichloro-6-{[(3-hydroxypropyl)imino]methyl}phenol; L3H2 = 4-tert-butyl-2-{[(3-hydroxypropyl)imino]methyl}phenol) and characterized by 1H, 13C NMR, IR spectroscopy, elemental analysis and single crystal X-ray analysis (1, 2), proving their tetranuclear structure in the solid state. Complexes 1-3 showed good catalytic activity in the ring opening homopolymerization (ROP) and ring opening copolymerization (ROcoP) of lactide (LA) and ε-caprolactone (ε-CL) in the presence of benzyl alcohol (BnOH) in toluene at 100 °C, yielding polymers with the expected average molecular weights (Mn) and narrow molecular weight distributions (MWD), as well as a high isoselectivity for the ROP of rac-lactide (rac-LA), yielding isotactic-enriched PLAs with Pm values up to 0.78. Kinetic studies with complex 1 proved the first order dependence on monomer concentration, while mechanistic studies confirmed the coordination insertion mechanistic (CIM) pathway. Sequential addition of monomers gave well defined diblock copolymers of PCL-b-PLLA and PLLA-b-PCL, proving the living character of the polymerization reactions. The catalysts also showed perfect selectivity for the copolymerization of cyclohexene oxide (CHO) with both succinic anhydride (SA) and maleic anhydride (MA) in the presence of BnOH and produced >99% alternating block copolymers.

Recent advances in synthesis of organometallic complexes of indium

The indium complexes are being used in many applications like catalysis, optoelectronics, sensors, solar cells, biochemistry, medicine, infrared (IR) mirrors and thin-film transistors (TFTs). In organometallic complexes of indium, it forms different types of complexes with single, double, triple and tetra linkages by coordinating with numerous elements like C, N, O and S and also with some other elements like Se and Ru. So, the present study comprises all the possible ways to synthesize the indium complexes by reacting with different organic ligands; most of them are N-heterocyclic carbenes, amines, amides and phenols. The commonly used solvents for these syntheses are tetrahydrofuran, dichloromethane, toluene, benzene, dimethyl sulfoxide (DMSO) and water. According to the nature of the ligands, indium complexes were reported at different temperatures and stirring time. Because of their unique characteristics, the organometallic chemistry of group 13 metal indium complexes remains a subject of continuing interest in synthetic chemistry as well as material science.

Cationic indium catalysts for ring opening polymerization: tuning reactivity with hemilabile ligands

This is a comprehensive study of the effects of rationally designed hemilabile ligands on the stability, reactivity, and change in catalytic behavior of indium complexes. We report cationic alkyl indium complexes supported by a family of hemi-salen type ligands bearing hemilabile thiophenyl (2a), furfuryl (2b) and pyridyl (2c) pendant donor arms. Shelf-life and stability of these complexes followed the trend 2a < 2b < 2c, showing direct correlation to the affinity of the pendant donor group to the indium center. Reactivity towards polymerization of epichlorohydrin and cyclohexene oxide followed the trend 2a > 2b > 2c with control of polymerization following an inverse relationship to reactivity. Surprisingly, 2c polymerized racemic lactide without an external initiator, likely through an alkyl-initiated coordination-insertion mechanism.

Highly efficient metal(iii) porphyrin and salen complexes for the polymerization of rac-lactide under ambient conditions

Metal(iii) complexes supported by porphyrin and salen ligands were highly efficient for rac-lactide polymerization at room temperature giving isotactic-enriched PLA.

Alkali metal complex-mediated ring-opening polymerization of rac-LA, ε-caprolactone, and δ-valerolactone

Catalytic ring opening polymerization (ROP) of rac-lactide, ε-caprolactone, and δ-valerolactone using alkali metal (Li, Na, K) complexes as competent catalysts are reported.

Heterodinuclear titanium/zinc catalysis: synthesis, characterization and activity for CO2/epoxide copolymerization and cyclic ester polymerization

The preparation of heterodinuclear complexes, especially those comprising early-late transition metals coordinated by a simple or symmetrical ancillary ligand, represents a fundamental challenge and an opportunity to prepare catalysts benefitting from synergic properties. Here, two new mixed titanium(iv)-zinc(ii) complexes, [LTi(OⁱPr)₂ZnEt] and [LTi(OⁱPr)₂ZnPh], both coordinated by a diphenolate tetra(amine) macrocyclic ligand (L), are prepared. The synthesis benefits from the discovery that reaction of the ligand with a single equivalent of titanium tetrakis(iso-propoxide) allows the efficient formation of a mono-Ti(iv) complex, [LTi(OⁱPr)₂]. All new complexes are characterized by a combination of single crystal X-ray diffraction, multinuclear NMR spectroscopy and mass spectrometry techniques. The two heterobimetallic complexes, [LTi(OⁱPr)₂ZnEt] and [LTi(OⁱPr)₂ZnPh], feature trianionic coordination by the macrocyclic ligand and bridging alkoxide groups coordinate to both the different metal centres. The heterodinuclear catalysts are compared to the mono-titanium analogue, [LTi(OⁱPr)₂], in various polymerization reactions. In the alternating copolymerizations of carbon dioxide and cyclohexene oxide, the mono-titanium complex is totally inactive whilst the heterodinuclear complexes show moderate activity (TOF = 3 h^-1); it should be noted the activity is measured using just 1 bar pressure of carbon dioxide. In the ring opening polymerization of lactide and ε-caprolactone, the mono-Ti(iv) complex is totally inactive whilst the heterodinuclear complexes show moderate-high activities, qualified by comparison to other known titanium polymerization catalysts (l-lactide, k_obs = 11 × 10^-4 s^-1 at 70 °C, 1 M in [lactide]) and ε-caprolactone (k_obs = 5 × 10^-4 s^-1 at 70 °C, 0.9 M in [ε-caprolactone]).

Indium Catalysts for Ring Opening Polymerization: Exploring the Importance of Catalyst Aggregation

Inexorably, the environmental persistence and damage caused by polyolefins have become major drawbacks to their continued long-term use. Global shifts in thinking from fossil-fuel to renewable biobased resources have urged researchers to focus their attention on substituting fossil-fuel based polymers with renewable and biodegradable alternatives on an industrial scale. The recent development of biodegradable polyesters from ring opening polymerization (ROP) of bioderived cyclic ester monomers has emerged as a promising new avenue toward this goal. Ever increasing numbers of metal-based initiators have been reported in the literature for the controlled ROP of cyclic esters, in particular for the polymerization of lactide to produce poly(lactic acid) (PLA). PLA has several material weaknesses, which hinder its use as a replacement for commodity plastics. Despite many advances in developing highly active and controlled catalysts for lactide polymerization, no single catalyst system has emerged to replace industrially used catalysts and provide access to PLA materials with improved properties. We reported the first example of indium(III) for the ring opening polymerization of lactide. Since then, indium(III) has emerged as a useful Lewis acid in initiators for the controlled polymerization of lactide and other cyclic esters. In particular, we have developed a large family of chiral dinuclear indium complexes bearing tridentate diaminophenolate ligands and tetradentate salen and salan ligands. Complexes within our tridentate ligand family are highly active initiators for the moderately isoselective living and immortal polymerization of rac-lactide, as well as other cyclic esters. We have shown that subtle steric effects influence aggregation in these systems, with polymerization typically proceeding through a dinuclear propagating species. In addition, profound effects on polymerization activities have been observed for central tertiary versus secondary amine donors in these and other related systems. In contrast, our well-controlled and highly active chiral indium salen systems are more isoselective than the tridentate analogues and polymerize lactide via a mononuclear propagating species. Again, we have noticed that subtle steric and electronic changes to the ligand can influence both polymerization activity and stereoselectivity via aggregation phenomena. Recently, we have reported a promising new chiral indium catalyst supported by a tetradentate salan ligand. This catalyst is remarkably water and air stable and can be activated by linear and branched alcohols to provide controlled access to multiblock copolymers in air. This catalyst represents an important step forward toward generating new, commercially relevant catalysts for ROP of cyclic esters to produce novel biodegradable polymers, and highlights the unique value of indium-based catalysts in the field.

Phosphasalen Indium Complexes Showing High Rates and Isoselectivities in rac-Lactide Polymerizations

Polylactide (PLA) is the leading bioderived polymer produced commercially by the metal-catalyzed ring-opening polymerization of lactide. Control over tacticity to produce stereoblock PLA, from rac-lactide improves thermal properties but is an outstanding challenge. Here, phosphasalen indium catalysts feature high rates (30±3 m^-1  min^-1 , THF, 298 K), high control, low loadings (0.2 mol %), and isoselectivity (P_i =0.92, THF, 258 K). Furthermore, the phosphasalen indium catalysts do not require any chiral additives.

A Comparison of Gallium and Indium Alkoxide Complexes as Catalysts for Ring-Opening Polymerization of Lactide

The impact of the metal size and Lewis acidity on the polymerization activity of group 13 metal complexes was studied, and it was shown that, within the same ligand family, indium complexes are far more reactive and selective than their gallium analogues. To this end, gallium and aluminum complexes supported by a tridentate diaminophenolate ligand, as well as gallium complexes supported by N,N'-ethylenebis(salicylimine)(salen) ligands, were synthesized and compared to their indium analogues. Using the tridentate ligand set, it was possible to isolate the gallium chloride complexes 3 and (±)-4 and the aluminum analogues 5 and (±)-6. The alkoxygallium complex (±)-2, supported by a salen ligand, was also prepared and characterized and, along with the three-component system GaCl₃/BnOH/NEt₃, was tested for the ring-opening polymerization of lactide and ε-caprolactone. The polymerization rates and selectivities of both systems were significantly lower than those for the indium analogues. The reaction of (±)-2 with 1 equiv of lactide forms the first insertion product, which is stable in solution and can be characterized at room temperature. In order to understand the differences of the reactivity within the group 13 metal complexes, a Lewis acidity study using triethylphosphine oxide (the Gutmann-Beckett method) was undertaken for a series of aluminum, gallium, and indium halide complexes; this study shows that indium halide complexes are less Lewis acidic than their aluminum and gallium analogues. Density functional theory calculations show that the Mulliken charges for the indium complexes are higher than those for the gallium analogues. These data suggest that the impact of ligands on the reactivity is more significant than that of the metal Lewis acidity.

Calcium, Strontium and Barium Homogeneous Catalysts for Fine Chemicals Synthesis

The large alkaline earths (Ae), calcium, strontium and barium, have in the past 15 years yielded a brand new generation of heteroleptic molecular catalysts for the production of fine chemicals. However, the integrity of these complexes is often plagued by ligand redistribution equilibria in solution. This personal account retraces the paths followed in our research group towards the design of stable heteroleptic alkalino-earth complexes, including the use of intramolecular noncovalent Ae···H-Si and Ae···F-C interactions. Their implementation as homogenous precatalysts for reactions such as the intramolecular and intermolecular hydroamination and hydrophosphination of activated alkenes, the hydrophosphonylation of ketones, and the dehydrogenative coupling of amines and hydrosilanes that enable the efficient and controlled formations of CP, CN, or SiN σ-bonds, is presented in a synthetic perspective that highlights their overall outstanding catalytic performance.

Structures of potassium calix[4]arene crown ether inclusion complexes and application in polymerization of rac-lactide

Reaction of 1,3-dipropoxy-p-tert-butyl-calix[4]arene (L(1)H2) with KN(SiMe3)2 afforded a one-dimensional (1D) chain complex [K2L(1)]n (1). Upon reaction with 1 equivalent 18-crown-6, complex 1 can convert to complex [K2(18-crown-6)L(1)] (2) which possesses a sandwich structure. Treatment of two calix[4]arene-crown ligands of 1,3-dihydroxy-p-tert-butyl-calix[4]arene-crown-5 (L(2)H2) and 1,2-dihydroxy-p-tert-butyl-calix[4]arene-crown-5 (L(3)H2) with KN(SiMe3)2 gave the dinuclear complex [K2L(2)] (3) and the mononuclear complex [K(THF)L(3)H] (4), respectively. Complexes 1-4 were all characterized by single-crystal X-ray diffraction techniques. The variable temperature (1)H NMR spectrum indicates there is a quick rotation equilibrium of the two phenoxy groups in complex 3. In addition, complexes 1-4 have been tested for the ring-opening polymerization (ROP) of rac-lactide and the results showed that complexes 2 and 3 are highly active for the ROP of rac-lactide. The obtained polymers displayed low dispersity values (Đ) and the molecular weights are close to the calculated ones. Furthermore, complexes 2 and 3 show moderate isoselectivities of Pm = 0.67 and Pm = 0.73, respectively.

Dinucleating Ligand Platforms Supporting Indium and Zinc Catalysts for Cyclic Ester Polymerization

The synthesis of the first alkoxide-bridged indium complex supported by a chiral dinucleating ligand platform (1), along with its zinc analogue (2), is reported. Both complexes are synthesized in a one-pot reaction starting from a chiral dinucleating bis(diamino)phenolate ligand platform, sodium ethoxide, and respective metal salts. The dinucleating indium analogue (7) based on an achiral ligand backbone is also reported. Indium complexes bearing either the chiral or achiral ligand catalyze the ring-opening polymerization of racemic lactide (rac-LA) to afford highly heterotactic poly(lactic acid) (PLA; Pr > 0.85). The indium complex bearing an achiral ligand affords essentially atactic PLA from meso-LA. The role of the dinucleating ligand structure in catalyst synthesis and polymerization activity is discussed.

Controlling the stereoselectivity of rac-LA polymerization by chiral recognition induced the formation of homochiral dimeric metal alkoxides

Chiral recognition of monomeric Me₂MOR units resulting in the formation of homochiral dimeric species [Me₂M(μ-OR)]₂(M = Ga, In), leads to heteroselective catalysts for the ring opening polymerization ofrac-lactide (rac-LA).

Crystal structure of dimethyl-1κ(2) C-bis(μ-4-methylphenolato-1:2κ(2) O:O)(N,N,N',N'-tetramethylethylenediamine-2κ(2) N,N')indium(III)lithium(I)

The mixed bimetallic title compound, [InLi(CH3)2(C7H7O)2(C6H16N2)] or [(tmeda)Li-μ-(4-MeC6H4O)2InMe2] (tmeda is N,N,N',N'-tetra-methyl-ethylenedi-amine), exhibits a four-membered LiO2In ring core via bridging 4-methyl-phenolate groups. The Li and In atoms are in distorted tetra-hedral N2O2 and C2O2 bonding environments, respectively. The Li atom is further chelated by a tmeda group, yielding a spiro-cyclic structure.

Overcoming aggregation in indium salen catalysts for isoselective lactide polymerization

A methodology for controlling aggregation in highly active and isoselective indium catalysts for the ring opening polymerization of racemic lactide is reported. A series of racemic and enantiopure dinuclear indium ethoxide complexes bearing salen ligands [(ONNOR)InOEt]2 (R = Br, Me, admantyl, cumyl, t-Bu) were synthesized and fully characterized. Mononuclear analogues (ONNOR)InOCH2Pyr (R = Br, t-Bu, SiPh3) were synthesized by controlling aggregation with the use of chelating 2-pyridinemethoxide functionality. The nuclearity of metal complexes was confirmed using PGSE NMR spectroscopy. Detailed kinetic studies show a clear initiation period for these dinuclear catalysts, which is lacking in their mononuclear analogues. The polymerization behavior of analogous dinuclear and mononuclear compounds is identical and consistent with a mononuclear propagating species. The isotacticity of the resulting polymers was investigated using direct integration and peak deconvolution methodologies and the two were compared.

Iso-selective ring-opening polymerization of rac-lactide catalyzed by crown ether complexes of sodium and potassium naphthalenolates

Two crown ether complexes of sodium and potassium naphthalenolates were synthesized and entirely characterized. The two complexes can iso-selectively catalyze the ring-opening polymerization (ROP) of rac-lactide at room temperature and afford polylactides with desired molecular weights and narrow PDIs; the best isotacticity (Pm) achieved was 0.73.

Synthesis and characterization of rare-earth metal complexes supported by a new pentadentate Schiff base and their application in heteroselective polymerization of rac-lactide

Both rare-earth metal salen aryloxides and amides can efficiently initiate the ring-opening polymerization of rac-lactide to give heterotactic-rich polylactides.

High activity of an indium alkoxide complex toward ring opening polymerization of cyclic esters

An indium complex supported by a ferrocene-derived Schiff base ligand has unprecedented activity toward ε-caprolactone, δ-valerolactone, and β-butyrolactone ring-opening polymerizations. l-Lactide, d,l-lactide, and trimethylene carbonate polymerizations also showed moderate to high activity.