Tuning of Metal–Metal Interactions in Mixed-Valence States of Cyclometalated Dinuclear Ruthenium and Osmium Complexes Bearing Tetrapyridylpyrazine or -benzene

Control of Photoisomerization Kinetics via Multistage Switching in Bimetallic Ru(II)-Terpyridine Complexes

In this study, we carried out detailed experimental and theoretical investigation on photophysical, electrochemical, and photoisomerization behaviors of a new array of luminescent binuclear Ru(II) complexes derived from a phenylene-vinylene-substituted terpyridyl ligand possessing RT lifetimes within 60.3-410.5 ns. The complexes experienced trans-to-cis isomerization in MeCN on irradiation with visible light, accompanied by significant changes in their absorption and emission spectral profiles. The reverse cis-to-trans process is also possible with the use of ultraviolet (UV) light. On conversion from trans to cis isomers, the emission intensity increases substantially, while for the reverse process, luminescence quenching occurs. Thus, "off-on" and "on-off" emission switching is facilitated upon treatment with visible and UV light alternatively. By the use of chemical oxidants (ceric ammonium nitrate and potassium permanganate) and reductants (metallic sodium) as well as light of appropriate wavelengths, multistate switching phenomena involving reversible oxidation-reduction and trans-cis isomerization have been achieved. Interestingly, the rate of this multistate photoswitching process becomes much faster compared to only two-state trans-cis isomerization of these complexes. Density functional theory (DFT) and time-dependent-DFT (TD-DFT) calculations are also performed to obtain a clear picture of the electronic environment of the complexes and also for the appropriate assignment of absorption and emission spectral bands.

Influence of the electronic effect of an ancillary ligand on MMCT and LMCT in localized cyanide-bridged complexes containing non-innocent ligands

For bimetallic MV complexes with non-innocent ligands, the MMCT energy in the localized system decreases significantly while the LMCT energy in the delocalized moiety increases slightly as the electronic effect of ancillary ligands is enhanced.

DFT/TD-DFT Framework of Mixed-Metal Complexes with Symmetrical and Unsymmetrical Bridging Ligands-Step-By-Step Investigations: Mononuclear, Dinuclear Homometallic, and Heterometallic for Optoelectronic Applications

Recently, mono- and dinuclear complexes have been in the interest of scientists due to their potential application in optoelectronics. Herein, progressive theoretical investigations starting from mononuclear followed by homo- and heterometallic dinuclear osmium and/or ruthenium complexes with NCN-cyclometalating bridging ligands substituted by one or two kinds of heteroaryl groups (pyrazol-1-yl and 4-(2,2-dimethylpropyloxy)pyrid-2-yl) providing the short/long axial symmetry or asymmetry are presented. Step-by-step information about the particular part that built the mixed-metal complexes is crucial to understanding their behavior and checking the necessity of their eventual studies. Evaluation by using density functional theory (DFT) calculations allowed gaining information about the frontier orbitals, energy gaps, and physical parameters of complexes and their oxidized forms. Through time-dependent density functional theory (TD-DFT), calculations showed the optical properties, with a particular emphasis on the nature of low-energy bands. The presented results are a clear indication for other scientists in the field of chemistry and materials science.

Lanthanide nitrato complexes bridged by the bis-tridentate ligand 2,3,5,6-tetra(2-pyridyl)pyrazine: Syntheses, crystal structures, Hirshfeld surface analyses, luminescence properties, DFT calculations, and magnetic behavior

Six dinuclear lanthanide(III) nitrato complexes [Ln(NO₃)₃(H₂O)]₂(μ-tppz) (where tppz = 2,3,5,6-tetra(2-pyridyl) pyrazine and Ln(III) = Nd (1), Sm (2), Eu (3), Gd (4), Tb (5), and Dy (6)) with bis-tridentate N-heterocyclic 2,3,5,6-tetra(2-pyridyl)pyrazine as bridging ligand have been solvothermally synthesized and characterized via elemental analysis, infrared spectroscopy, thermogravimetric analysis, single-crystal X-ray diffraction, and powder X-ray diffraction. The 3-D Hirshfeld surface and 2-D fingerprint plots show that the main interactions in 1-6 are the O⋯H/H⋯O intermolecular interactions with relative contributions of about 62%. Although the poor lanthanide(III)-centered luminescence properties clearly point to the efficiency of nonradiative quenching processes (presence of water molecules in the coordination sphere of the lanthanide(III) ions), the ligand tppz is better suited to sensitize the lanthanide(III)'s emissions of Eu^III and Nd^III than Sm^III, Tb^III, and Dy^III. Finally, the magnetic data of Dy^III comple×6 reveals antiferromagnetic coupling between Dy^III ions.

Proton-Rocking-Chair-Type Redox Capacitors Based on Indium Tin Oxide Electrodes with Multilayer Films Containing Ru Complexes

A rechargeable proton-rocking-chair-type redox capacitor was fabricated using scalable layer-by-layer-(LbL)-assembled films composed of two dinuclear Ru complexes that exhibit proton-coupled electron-transfer (PCET) reactions with different Ru(II/III) redox potentials (RuNH-OH and RuCH-OH). RuNH-OH and RuCH-OH contain different coordination environments that involve two phosphonate linker ligands at both ends and bridging 2,6,2',6'-tetrakis(benzimidazol-2-yl)-4,4'-bipyridine or 1,3,1',3'-tetrakis(benzimidazol-2-yl)-5,5'-biphenyl ligands, respectively. The molecular units were assembled onto indium tin oxide (ITO) electrodes by complexation between the phosphonate groups and zirconium(IV) ions. The LbL growing process of these multilayer films was monitored by electrochemical or UV-vis spectroscopic measurements. The thus obtained LbL films on the ITO electrodes showed PCET reactions at different potentials, depending on the bridging ligands. The introduction of cyclometalated Ru-C bonds in the bridging ligand of RuCH-OH led to the stabilization of the ruthenium(III) oxidation state, and therefore, RuCH-OH exhibited lower p K_a values for the imino N-H protons in the bridging benzimidazole groups compared to those of the corresponding RuNH-OH complex. The proton movements that accompany the redox reaction in the Ru multilayer films on the ITO electrode were confirmed using a pH indicator probe. For the performance test of a proton-rocking-chair-type redox capacitor, a two-electrode system composed of RuNH-OH and RuCH-OH multilayer films on ITO electrodes was examined in an aqueous solution of NaClO₄. Under galvanostatic conditions, stable, reversible, and repeatable charging/discharging processes occurred. The capacitance increased with an increasing number of LbL layers. For comparison, a similar redox capacitor composed of two RuNMe-OH and RuCMe-OH analogues, in which all four imino N-H protons on the benzimidazole moieties are protected by N-Me groups, was constructed and examined. In these complexes, the capacitance decreased by 77% compared to the PCET-type capacitor composed of a cell containing RuNH-OH and RuCH-OH; this result strongly suggests that the proton movement plays a more important role for the charge storage than the anion movement. In such LbL films composed of Ru complexes that exhibit PCET-type redox reactions, the capacitance is drastically improved with an increasing number of layers and using protons as charge carriers.

Stepwise synthesis, characterization, DNA binding properties and cytotoxicity of diruthenium oligopyridine compounds conjugated with peptides

Although the interactions of oligopyridine ruthenium complexes with DNA have been widely studied, the biological activity of similar diruthenium oligopyridine complexes conjugated with peptides has not been investigated. Herein, we report the stepwise synthesis and characterization of diruthenium complexes with the general formula [(L^a)Ru(tppz)Ru(L^b)]ⁿ⁺ (tppz = 2,3,5,6-tetra(2-pyridyl)pyrazine, L^a = 2,2':6',2''-terpyridine or 4-phenyl-2,2':6',2''-terpyridine and L^b = 2,2':6',2''-terpyridine-4'-CO(Gly¹-Gly²-Gly³-LysCONH₂) (5), (6), n = 5; 2,2':6',2''-terpyridine-4'-CO(Gly¹-Gly²-Lys¹-Lys²CONH₂) (7), (8), n = 6; 2,2':6',2''-terpyridine-4'-CO(Ahx-Lys¹Lys²CONH₂) (9), (10), n = 5, Ahx = 6-aminohexanoic acid). The compounds [(trpy)Ru(tppz)Ru(trpy-CO₂H)](PF₆)₄, (2)(PF₆)₄, [(ptrpy)Ru(tppz)Ru(trpy-CO₂H)](PF₆)₄, (3)(PF₆)₄ and [(ptrpy)Ru(tppz)Ru(trpy)](PF₆)₄, (4)(PF₆)₄ were also characterized by single crystal X-ray methods. Moreover, the interactions of the chloride salts (5), (6) and (4) with the self-complementary dodecanucleotide duplex d(5'-CGCGAATTCGCG-3')₂ were studied by NMR spectroscopic techniques. The results show that complex (4) binds in the central part of the oligonucleotide, from the minor groove through the ligand ptrpy, while the ligand trpy, which was located on the other side of the diruthenium core, does not contribute to the binding. Complex (5) binds similarly, through the ligand ptrpy. However, the induced upfield shifts of the ptrpy proton signals are significantly lower than the corresponding ones in the case of (4), indicating much lower binding affinity. This is clear evidence that the tethered peptide Gly¹-Gly²-Gly³-Lys¹CONH₂ hinders the complex binding, even though it contains groups that are able to assist it (e.g., the positively charged amino group of lysine, the peptidic backbone, the terminal amide). Complex (6) shows a non-specific binding, interacting through electrostatic forces. The chloride salts of (4), (5) and (6) had insignificant effects on the cell cycle distribution and marginal cytotoxicity (IC₅₀ > 750 μM) against human lung cancer cell lines H1299 and H1437, indicating that their binding to the oligonucleotide is not a sufficient condition for their cytotoxicity.

A dinuclear [{(p-cym)Ru(II)Cl}2(μ-bpytz˙(-))](+) complex bridged by a radical anion: synthesis, spectroelectrochemical, EPR and theoretical investigation (bpytz = 3,6-bis(3,5-dimethylpyrazolyl)1,2,4,5-tetrazine; p-cym = p-cymene)

The reaction of the chloro-bridged dimeric precursor [{(p-cym)Ru(II)Cl}(μ-Cl)]2 (p-cym = p-cymene) with the bridging ligand 3,6-bis(3,5-dimethylpyrazolyl)-1,2,4,5-tetrazine (bpytz) in ethanol results in the formation of the dinuclear complex [{(p-cym)Ru(II)Cl}2(μ-bpytz˙(-))](+), [1](+). The bridging tetrazine ligand is reduced to the anion radical (bpytz˙(-)) which connects the two Ru(II) centres. Compound [1](PF6) has been characterised by an array of spectroscopic and electrochemical techniques. The radical anion character has been confirmed by magnetic moment (corresponding to one electron paramagnetism) measurement, EPR spectroscopic investigation (tetrazine radical anion based EPR spectrum) as well as density functional theory based calculations. Complex [1](+) displays two successive one electron oxidation processes at 0.66 and 1.56 V versus Ag/AgCl which can be attributed to [{(p-cym)Ru(II)C}2(μ-bpytz˙(-))](+)/[{(p-cym)Ru(II)Cl}2(μ-bpytz)](2+) and [{(p-cym)Ru(II)Cl}2(μ-bpytz)](+)/[{(p-cym)Ru(III)Cl}2(μ-bpytz)](2+) processes (couples I and II), respectively. The reduction processes (couple III-couple V), which are irreversible, likely involve the successive reduction of the bridging ligand and the metal centres together with loss of the coordinated chloride ligands. UV-Vis-NIR spectroelectrochemical investigation reveals typical tetrazine radical anion containing bands for [1](+) and a strong absorption in the visible region for the oxidized form [1](2+), which can be assigned to a Ru(II) → π* (tetrazine) MLCT transition. The assignment of spectroscopic bands was confirmed by theoretical calculations.

Bridged cyclometalated diruthenium complexes for fundamental electron transfer studies and multi-stage redox switching

Four bridged cyclometalated diruthenium systems are highlighted in this Frontier article, including strongly-coupled diruthenium complexes with a short phen-1,4-diyl or a planar pyren-2,7-diyl bridge, redox asymmetric diruthenium complexes characterized by different terminal ligands on the two ends, diruthenium complexes with a urea bridge that allows modulating the degree of electronic coupling, and those with a redox-active amine bridge with varying electronic structures. These complexes posess redox couples with low potentials and intense intervalence charge transfer absorptions in the near-infrared region in the one-electron-oxidized mixed-valent state. They are appealing not only for providing a platform for fundamental electron transfer studies but also as molecular materials with multi-stage redox switching properties.

Controlling the Molecular Direction of Dinuclear Ruthenium Complexes on HOPG Surface through Noncovalent Bonding

We synthesized three types of binuclear Ru complexes (1-3) that contain pyrene anchors for the adsorption of 1-3 onto nanocarbon materials via noncovalent π-π interactions, in order to investigate their adsorption onto and their desorption from highly ordered pyrolytic graphite (HOPG). The adsorption saturation for 1 (6.22 pmol/cm²), 2 (2.83 pmol/cm²), and 3 (3.53 pmol/cm²) on HOPG was obtained from Langmuir isotherms. The desorption rate from HOPG electrodes decreased in the order 3 (2.4 × 10^-5 s^-1) > 2 (1.4 × 10^-5 s^-1) ≫ 1 (1.8 × 10^-6 s^-1). These results indicate that the number of pyrene anchors and their position of substitution in such complexes strongly affect the desorption behavior. However, neither the free energy of adsorption (ΔG_ads) nor the heterogeneous electron-transfer rate (k_ET) showed any significant differences among 1-3, albeit that the surface morphologies of the modified HOPG substrates showed domain structures that were characteristic for each Ru complex. In the case of 3, the average height changed from ∼2 to ∼4 nm upon increasing the concentration of the solution of 3 that was used for the surface modification. In contrast, the height for 1 and 2 remained constant (1.5-2 nm) upon increasing the concentration of the complexes in the corresponding solutions. While the molecular orientation of the Ru-Ru axis of 3 relative to the HOPG surface normal changed from parallel to perpendicular, the Ru-Ru axis in 1 and 2 remained parallel, which leads to an increased stability of 1 and 2.

CrIII as an alternative to RuII in metallo-supramolecular chemistry

Semi-labile [Cr(tpy)(CF₃SO₃)₃] precursors can be exploited for building rod-like dinuclear dyads, in which paramagnetic and luminescent trivalent Cr^III replace diamagnetic Ru^II for unravelling intermetallic communication in supramolecular architectures.

Synthesis and Single-Molecule Conductance Study of Redox-Active Ruthenium Complexes with Pyridyl and Dihydrobenzo[b]thiophene Anchoring Groups

The ancillary ligands 4'-(4-pyridyl)-2,2':6',2''-terpyridine and 4'-(2,3-dihydrobenzo[b]thiophene)-2,2'-6',2"-terpyridine were used to synthesize two series of mono- and dinuclear ruthenium complexes differing in their lengths and anchoring groups. The electrochemical and single-molecular conductance properties of these two series of ruthenium complexes were studied experimentally by means of cyclic voltammetry and the scanning tunneling microscopy-break junction technique (STM-BJ) and theoretically by means of density functional theory (DFT). Cyclic voltammetry data showed clear redox peaks corresponding to both the metal- and ligand-related redox reactions. Single-molecular conductance demonstrated an exponential decay of the molecular conductance with the increase in molecular length for both the series of ruthenium complexes, with decay constants of βPY =2.07±0.1 nm(-1) and βBT =2.16±0.1 nm(-1) , respectively. The contact resistance of complexes with 2,3-dihydrobenzo[b]thiophene (BT) anchoring groups is found to be smaller than the contact resistance of ruthenium complexes with pyridine (PY) anchors. DFT calculations support the experimental results and provided additional information on the electronic structure and charge transport properties in those metal|ruthenium complex|metal junctions.

Controlling the Direction of the Molecular Axis of Rod-Shaped Binuclear Ruthenium Complexes on Single-Walled Carbon Nanotubes

We report the synthesis of a mixed-valence ruthenium complex, bearing pyrene moieties on one side of the ligands as anchor groups. Composites consisting of mixed-valence ruthenium complexes and SWNTs were prepared by noncovalent π-π interactions between the SWNT surface and the pyrene anchors of the Ru complex. In these composites, the long axis of the Ru complexes was aligned in parallel to the principal direction of the SWNT. The optimized conformation of these complexes on the SWNT surface was calculated by molecular mechanics. The composites were examined by UV/Vis absorption and FT-IR spectroscopy, XPS, and SEM analysis. Furthermore, their electrochemical properties were evaluated. Cyclic voltammograms of the composites showed reversible oxidation waves at peak oxidation potentials (Epox ) = 0.86 and 1.08 V versus Fc(+) /Fc, which were assigned to the Ru(II) -Ru(II) /Ru(II) -Ru(III) and the Ru(II) -Ru(III) /Ru(III) -Ru(III) oxidation events of the dinuclear ruthenium complex, respectively. Based on these observations, we concluded that the electrochemical properties and mixed-valence state of the dinuclear ruthenium complexes were preserved upon attachment to the SWNT surface.

Syntheses, characterization and electrochemical and spectroscopic properties of ruthenium–iron complexes of 2,3,5,6-tetrakis(2-pyridyl)pyrazine and ferrocene-acetylide ligands

A mixed-valence Ru^IIFe^III complex displays 0.50 V of redox potential difference induced by Ru⋯Fe interactions across the Ru–CC–Fc backbone and moderate IVCT band centered at 1247 nm.

Layer-by-layer grown scalable redox-active ruthenium-based molecular multilayer thin films for electrochemical applications and beyond

Here we report the first study on the electrochemical energy storage application of a surface-immobilized ruthenium complex multilayer thin film with anion storage capability. We employed a novel dinuclear ruthenium complex with tetrapodal anchoring groups to build well-ordered redox-active multilayer coatings on an indium tin oxide (ITO) surface using a layer-by-layer self-assembly process. Cyclic voltammetry (CV), UV-Visible (UV-Vis) and Raman spectroscopy showed a linear increase of peak current, absorbance and Raman intensities, respectively with the number of layers. These results indicate the formation of well-ordered multilayers of the ruthenium complex on ITO, which is further supported by the X-ray photoelectron spectroscopy analysis. The thickness of the layers can be controlled with nanometer precision. In particular, the thickest layer studied (65 molecular layers and approx. 120 nm thick) demonstrated fast electrochemical oxidation/reduction, indicating a very low attenuation of the charge transfer within the multilayer. In situ-UV-Vis and resonance Raman spectroscopy results demonstrated the reversible electrochromic/redox behavior of the ruthenium complex multilayered films on ITO with respect to the electrode potential, which is an ideal prerequisite for e.g. smart electrochemical energy storage applications. Galvanostatic charge-discharge experiments demonstrated a pseudocapacitor behavior of the multilayer film with a good specific capacitance of 92.2 F g(-1) at a current density of 10 μA cm(-2) and an excellent cycling stability. As demonstrated in our prototypical experiments, the fine control of physicochemical properties at nanometer scale, relatively good stability of layers under ambient conditions makes the multilayer coatings of this type an excellent material for e.g. electrochemical energy storage, as interlayers in inverted bulk heterojunction solar cell applications and as functional components in molecular electronics applications.