Copolymerization of Ethylene and Methyl Acrylate by Cationic Palladium Catalysts That Contain Phosphine-Diethyl Phosphonate Ancillary Ligands

Donor Ability of Bisphosphinemonoxide Ligands Relevant to Late-Metal Olefin Polymerization Catalysis

Late-transition-metal catalysts for polymerization of olefins have drawn a significant amount of attention owing to their ability to tolerate and incorporate polar comonomers. However, a systematic way to experimentally quantify the electronic properties of the ligands used in these systems has not been developed. Quantified ligand parameters will allow for the rational design of tailored polymerization catalysts, which would target specific polymer properties. We report a series of platinum complexes bearing bisphosphinemonoxide ligands, which resemble those used in the polymerization catalysts of Nozaki and Chen. Their electronic properties are investigated experimentally, and trends are rationalized by using computed spectral properties. Benchmarking computational data with known experimental parameters further enhances the utility of both methods for determining optimal ligands for catalytic application.

Rigidifying Cation-Tunable Nickel Catalysts Increases Activity and Polar Monomer Incorporation in Ethylene and Methyl Acrylate Copolymerization

In this study, we synthesized and characterized two nickel complexes featuring conformationally rigid bisphosphine mono-oxide ligands, where one has an o-methoxyphenyl (Ni2) and the other has an o-(2-methoxyethoxy)phenyl (Ni3) substituent on the P═O moiety. We performed metal binding studies using Ni3 and found that its reaction with Li⁺ and Na⁺ most likely produced 1:1 and 1:1/2:1 nickel:alkali species in solution, respectively. The nickel complexes were competent catalysts for ethylene homopolymerization and copolymerization, with activities up to 3.8 × 10³ and 8.1 × 10 kg mol^-1 h^-1, respectively. In reactions of ethylene with methyl acrylate (1.0 M), the addition of Li⁺ to Ni3 led to a 5.4-fold enhancement in catalyst activity and a 1.9-fold increase in polar monomer incorporation in comparison to those by Ni3 alone under optimized conditions. A comparison with other nickel catalysts reported for ethylene and methyl acrylate copolymerization revealed that our nickel-alkali catalysts are competitive with some of the most efficient Ni-based systems developed thus far.

The Formation of P-C Bonds Utilizing Organozinc Reagents for the Synthesis of Aryl- and Heteroaryl-Dichlorophosphines

Aryl- and heteroaryl-dichlorophosphines are mildly and selectively made in a one-pot synthesis in moderate to good yields starting from the respective aryl bromides or five-membered heterocycles, following lithiation with nBuLi, transmetalation with ZnCl₂, and subsequently the reaction with PCl₃. Selected aryl- and heteroaryl-dichlorophosphines were successfully synthesized using this reaction method and could easily be purified after isolation. The intermediate formation of the organozinc species is essential, as it prevents the formation of multiple substitution products. Important are also the reaction conditions: the usage of the proper solvent for the respective aromatic precursors and removal of the remaining salts by addition of a dioxane/pentane mixture. Depending on the solvent and steric demand of the substituent, mono- and bis-substitution products can be formed but formation also prevented. Hereby, different organozinc species might play an important role.

Influences of Ligand Backbone Substituents on Phosphinecarbonylpalladium and -nickel Catalysts for Ethylene Polymerization and Copolymerization with Polar Monomers

A series of phosphinecarbonylpalladium and -nickel catalysts bearing various substituents on the ligand backbone were prepared, characterized, and used in ethylene polymerization and copolymerization with polar monomers. The Pd and Ni catalysts can achieve high activities as well as high polymer molecular weights in both ethylene polymerization and copolymerization with polar monomers. The electron-donating group from the carbonyl side can effectively increase the polymer molecular weights. Utilization of a cyclic backbone structure can increase the catalytic activities at the expense of the polymer molecular weights. Moreover, installation of a pyridyl moiety in the ligand backbone can enable Lewis acid responsiveness and can enhance the polymerization activities. These results suggest the importance of the ligand backbone for the properties of catalysts in ethylene polymerization and copolymerization reactions.

Controlled di-lithiation enabled synthesis of phosphine-sulfonamide ligands and implications in ethylene oligomerization

Catalyst design for ethylene oligomerization has attracted significant interest. Herein, we report the synthesis of phosphine-sulfonamide-derived palladium complexes and examine their performance in ethylene oligomerization. Arresting a dilithiation intermediate of N-(2-bromophenyl)-4-methylbenzenesulfonamide (1) at -84 °C selectively produced N-(2-(bis(2-methoxyphenyl)phosphanyl)phenyl)-4-methylbenzenesulfonamide (L1A). However, the same reaction at -41 °C delivered a different ligand; 2-(bis(2-methoxyphenyl)phosphanyl)-4-methyl-N-phenylbenzenesulfonamide (L2A). The generality of our strategy has been demonstrated by preparing N-(2-(diphenylphosphanyl)phenyl)-4-methylbenzenesulfonamide (L1B) and 2-(diphenylphosphanyl)-4-methyl-N-phenylbenzenesulfonamide (L2B). Subsequently, L1A and L1B were treated with a palladium precursor to yield 5-membered complexes C1 and C2, respectively. In contrast, L2A upon treatment with palladium produced a 6-membered metal complex C3. Thus, a small library of 7 palladium complexes (C1-C7) were synthesized by varying the donor moiety (pyridine, DMSO, and acetonitrile). The identity of palladium complexes was unambiguously ascertained using a combination of spectroscopic and analytical methods, including single-crystal X-ray diffraction. The performance of the complexes C1-C7 was investigated in ethylene oligomerization and almost all of them were found to be active. The resultant ethylene oligomers were characterized using 1H and 13C NMR, MALDI-ToF-MS, and GPC. Detailed screening of reaction parameters revealed 100 °C and 40 bars ethylene to be optimal conditions. Complex C5 outperformed other complexes and produced ethylene oligomers with a molecular weight of 1000-1900 g mol-1.

Microwaves as "Co-Catalysts" or as Substitute for Catalysts in Organophosphorus Chemistry

The purpose of this review is to summarize the importance of microwave (MW) irradiation as a kind of catalyst in organophosphorus chemistry. Slow or reluctant reactions, such as the Diels-Alder cycloaddition or an inverse-Wittig type reaction, may be performed efficiently under MW irradiation. The direct esterification of phosphinic and phosphonic acids, which is practically impossible on conventional heating, may be realized under MW conditions. Ionic liquid additives may promote further esterifications. The opposite reaction, the hydrolysis of P-esters, has also relevance among the MW-assisted transformations. A typical case is when the catalysts are substituted by MWs, which is exemplified by the reduction of phosphine oxides, and by the Kabachnik-Fields condensation affording α-aminophosphonic derivatives. Finally, the Hirao P-C coupling reaction may serve as an example, when the catalyst may be simplified under MW conditions. All of the examples discussed fulfill the expectations of green chemistry.

Copolymerisation of 1-alkenes with bulky oxygen-containing olefins for dual-stage functionalisation of polyolefins

Pd–Diimine complexes catalyse the copolymerisation of 1-alkenes with olefins having a bulky oxygen-containing substituents, such as cyclic acetal or bicycloorthoester groups, affording the copolymers containing the comonomer unit up to 34%.

Indole-bridged bisphosphine-monoxide palladium catalysts for ethylene polymerization and copolymerization with polar monomers

Novel indole-based C–N-bridged bisphosphine-monoxide palladium catalysts enable ethylene polymerization with completely different activities and molecular weights and copolymerization with polar comonomers.

Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers

Transition-metal-catalyzed copolymerization of olefins with polar monomers represents a challenge because of the large variety of substrate-induced side reactions. However, this approach also holds the potential for the direct synthesis of polar functionalized polyolefins with unique properties. After decades of research, only a few catalyst systems have been found to be suitable for this reaction. Some major advances in catalyst development have been made in the past five years. This Minireview summarizes some of the recent progress in the extensively studied Brookhart and Drent catalyst systems, as well as emerging alternative palladium and nickel catalysts.

Development of highly productive nickel–sodium phenoxyphosphine ethylene polymerization catalysts and their reaction temperature profiles

Heterobimetallic nickel–sodium phenoxyphosphine complexes were found to be among one of the most efficient late metal catalysts for ethylene polymerization.

Accelerating ethylene polymerization using secondary metal ions in tetrahydrofuran

A variety of metal cations are capable of enhancing the ethylene polymerization rates of nickel phosphine phosphonate-polyethylene glycol catalysts.

New Developments on the Hirao Reactions, Especially from "Green" Point of View

BACKGROUND

The Hirao reaction discovered ca. 35 years ago is an important P-C coupling protocol between dialkyl phosphites and aryl halides in the presence of Pd(PPh3)4 as the catalyst and a base to provide aryl phosphonates. Then, the reaction was extended to other Preagents, such as secondary phosphine oxides and H-phosphinates and to other aryl and hetaryl derivatives to afford also phosphinic esters and tertiary phosphine oxides. Instead of the Pd(PPh3)4 catalyst, Pd(OAc)2 and Ni-salts were also applied as catalyst precursors together with a number of mono- and bidentate P-ligands.

OBJECTIVE

In our review, we undertook to summarize the target reaction with a special stress on the developments attained in the last 6 years, hence this paper is an update of our earlier reviews in a similar topic.

CONCLUSIONS

"Greener" syntheses aimed at utilizing phase transfer catalytic and microwave-assisted approaches, even under "P-ligand-free. or even solvent-free conditions are the up-to date versions of the classical Hirao reaction. The mechanism of the reaction is also in the focus these days.

Electron-Rich Metal Cations Enable Synthesis of High Molecular Weight, Linear Functional Polyethylenes

Group 10 metal catalysts have shown much promise for the copolymerization of nonpolar with polar alkenes to directly generate functional materials, but access to high copolymer molecular weights nevertheless remains a key challenge toward practical applications in this field. In the context of identifying new strategies for molecular weight control, we report a series of highly polarized P(V)-P(III) chelating ligands that manifest unique space filling and electrostatic effects within the coordination sphere of single component Pd polymerization catalysts and exert important influences on (co)polymer molecular weights. Single component, cationic phosphonic diamide-phosphine (PDAP) Pd catalysts are competent to generate linear, functional polyethylenes with M_w up to ca. 2 × 10⁵ g mol^-1, significantly higher than prototypical catalysts in this field, and with polar content up to ca. 9 mol %. Functional groups are positioned by these catalysts almost exclusively along the main chain, not at chain ends or ends of branches, which mimics the microstructures of commercial linear low-density polyethylenes. Spectroscopic, X-ray crystallographic, and computational data indicate PDAP coordination to Pd manifests cationic yet electron-rich active species, which may correlate to their complementary catalytic properties versus privileged catalysts such as electrophilic α-diimine (Brookhart-type) or neutral phosphine-sulfonato (Drent-type) complexes. Though steric blocking within the catalyst coordination sphere has long been a reliable strategy for catalyst molecular weight control, data from this study suggest electronic control should be considered as a complementary concept less prone to suppression of comonomer enchainment that can occur with highly sterically congested catalysts.

Methylene-Bridged Bisphosphine Monoxide Ligands for Palladium-Catalyzed Copolymerization of Ethylene and Polar Monomers

A series of palladium complexes bearing a bisphosphine monoxide with a methylene linker, that is, [κ²-P,O-(R¹₂P)CH₂P(O)R²₂]PdMe(2,6-lutidine)][BAr^F₄] (Pd/BPMO), were synthesized and evaluated as catalysts for the homopolymerization of ethylene and the copolymerization of ethylene and polar monomers. X-ray crystallographic analyses revealed that these Pd/BPMO complexes exhibit significantly narrower bite angles and longer Pd-O bonds than Pd/BPMO complexes bearing a phenylene linker, while maintaining almost constant Pd-P bond lengths. Among the complexes synthesized, menthyl-substituted complex 3f (R¹ = (1R,2S,5R)-2-isopropyl-5-methylcyclohexan-1-yl; R² = Me) showed the best catalytic performance in the homo- and copolymerization in terms of molecular weight and polymerization activity. Meanwhile, complex 3e (R¹ = t-Bu; R² = Me) exhibited a markedly higher incorporation of comonomers in the copolymerization of ethylene and allyl acetate (≤12.0 mol %) or methyl methacrylate (≤0.6 mol %). The catalytic system represents one of the first examples of late-transition-metal complexes bearing an alkylene-bridged bidentate ligand that afford high-molecular-weight copolymers from the copolymerization of ethylene and polar monomers.

Sequential Electrophilic Substitution Reactions of Tungsten-Coordinated Phosphenium Ions and Phosphine Triflates

ion of chloride from [W(CO)₅{PPhCl₂}] with AgOSO₂CF₃ leads to the phosphine triflate complex [W(CO)₅{PPhCl(OSO₂CF₃)}] which undergoes electrophilic substitution reactions with N,N-diethylaniline, anisole, N,N-dimethyl-p-toluidine, toluene, biphenyl, naphthalene, 2,7,9,9-tetramethyl xanthene, and allyltrimethylsilane to form the chlorophosphine complexes [W(CO)₅{PPhClR}], where R = p-diethylanilinyl, p-anisyl, 2-(N,N-dimethyl-4-methylphenyl), p-tolyl, p-phenylphenyl, 1-naphthyl, 4-(2,7,9,9-tetramethylxanthyl), and allyl. Abstraction of the second chloride with AgOSO₂CF₃ leads, in most cases, to the respective phosphine triflates [W(CO)₅{PPhR(OSO₂CF₃)}], which react with ferrocene to form the ferrocenyl phosphine complexes [W(CO)₅{PPhR(C₁₀H₉Fe)}]. The W(CO)₅ unit can be removed via photolysis in the presence of bis(diphenylphosphino)ethane to form metal-free phosphines.