The Chemistry of Aluminum(I), Silicon(II), and Germanium(II)

Applications of low-valent compounds with heavy group-14 elements

Over the last two decades, the low-valent compounds of group-14 elements have received significant attention in several fields of chemistry owing to their unique electronic properties. The low-valent group-14 species include tetrylenes, tetryliumylidene, tetrylones, dimetallenes and dimetallynes. These low-valent group-14 species have shown applications in various areas such as organic transformations (hydroboration, cyanosilylation, N-functionalisation of amines, and hydroamination), small molecule activation (e.g. P4, As4, CO2, CO, H2, alkene, and alkyne) and materials. This review presents an in-depth discussion on low-valent group-14 species-catalyzed reactions, including polymerization of rac-lactide, L-lactide, DL-lactide, and caprolactone, followed by their photophysical properties (phosphorescence and fluorescence), thin film deposition (atomic layer deposition and vapor phase deposition), and medicinal applications. This review concisely summarizes current developments of low-valent heavier group-14 compounds, covering synthetic methodologies, structural aspects, and their applications in various fields of chemistry. Finally, their opportunities and challenges are examined and emphasized.

Access to a peri-Annulated Aluminium Compound via C-H Bond Activation by a Cyclic Bis-Aluminylene

Carbocyclic aluminium halides [(ADC)AlX2]2 (2-X) (X=F, Cl, and I) based on an anionic dicarbene (ADC=PhC{N(Dipp)C}2, Dipp = 2,6-iPr2C6H3) framework are prepared as crystalline solids by dehydrohalogenations of the alane [(ADC)AlH2]2 (1). KC8 reduction of 2-I affords the peri-annulated Al(III) compound [(ADCH)AlH]2 (4) (ADCH=PhC{N(Dipp)C2(DippH)N}, DippH=2-iPr,6-(Me2C)C6H3)) as a colorless crystalline solid in 76 % yield. The formation of 4 suggests intramolecular insertion of the putative bis-aluminylene species [(ADC)Al]2 (3) into the methine C-H bond of HCMe2 group. Calculations predict singlet ground state for 3, while the conversion of 3 into 4 is thermodynamically favored by 61 kcal/mol. Compounds 2-F, 2-Cl, 2-I, and 4 have been characterized by NMR spectroscopy and their solid-state molecular structures have been established by single crystal X-ray diffraction.

Syntheses of Iminophosphomamido Chlorogermylenes and Their Complexation with a Rhodium(I) Complex

Three-coordinated chlorogermylenes of the type [Ph2 P(RN)2 ]GeCl (3: R=t Bu; 4: R=Dip=2,6-i Pr2 C6 H3 ), which bear an N,N-substituted iminophosphonamide ligand, were synthesized. The coordination behavior of 3 and 4 toward rhodium(I) complex was investigated. When 3 was treated with 1/2 of an equivalent of [RhCl(cod)]2 (cod=1,5-cyclooctadiene), the corresponding chlorogermylene-Rh(I) complex 5 was obtained as orange crystals. In contrast, the reaction of 4 with a half equivalent of [RhCl(cod)]2 under a CO atmosphere resulted in the formation of a five-membered germarhodacycle 7. Compounds 3, 4, 5, and 7 were characterized using NMR spectroscopies and single-crystal X-ray diffraction. Complex 5 can be employed as a catalyst for the hydrosilylation and hydroboration reactions of diphenylacetylene, thus demonstrating the utility of germylene ligands comparable to those of NHCs in the major transition metal catalytic processes.

Designing of efficient two-armed colorimetric and fluorescent indole appended organosilicon sensors for the detection of Al(III) ions: Implication as paper-based sensor

Metal ions have significant roles in diagnosis, industry, human health, and the environment. To design and develop new lucid molecular receptors for the selective detection of metal ions is important for environmental and medical applications. In the present work, two-armed indole appended Schiff bases conjoined with 1,2,3-Triazole bis-organosilane and bis-organosilatrane skelton sensors for naked eye colorimetric and fluorescent detection sensors for Al(III) are developed. The introduction of Al(III) in sensor 4 and 5 show red shift in UV-visible spectra, changes in fluorescence spectra and immediate color change from colorless to dark yellow. Furthermore, the pH and time response studies were explored for both sensors 4 & 5. The sensors 4 and 5 exhibited significantly low detection limit (LOD) in nano-molar range 1.41 × 10-9 M and 0.17 × 10-9 M respectively from emission titration. The LOD form absorption titration was found to be 0.6 × 10-7 M for sensor 4 and 0.22 × 10-7 M for sensor 5. In addition, the sensing model is developed as paper based sensor for its practical applicability. The theoretical calculations were performed on Gaussian 03 program by relaxing the structures using Density functional theory.

Germylenes Exhibiting Solid-State Emissions that Extend to NIR

Low-valent main group compounds that fluoresce in the solid-state were previously unknown. To address this, we investigated room-temperature photoluminescence from a series of crystals of germylenes 3-8 in this article; they exhibited emissions nearly reaching the NIR. Germylene carboxylates (3-8) were synthesized by reacting dipyrromethene stabilized germylene pyrrolide (2) with carboxylic acids such as acetic acid, trifluoroacetic acid, benzoic acid, p-cyanobenzoic acid, p-nitrobenzoic acid, and acetylsalicylic acid.

Aza-Dipyrrinate Stabilized Compounds with a Low-Valent Main Group Element

The possibility of using aza-dipyrromethene (a-DPM) ligands to stabilize compounds containing low-valent main group elements is demonstrated through the isolation of germylenes, a-DPM(p-tol)GeCl (2), a-DPM(Naph)GeCl (6), and a-DPM(Naph)GeN(TMS)2 (7) (tol=tolyl, Naph=naphthyl). Because of the presence of the a-DPM ligand, these germylenes exhibit an absorption maximum at around 640 nm, a highly red-shifted value previously unknown for germylenes.

A crystalline T-shaped planar group 14 anion

Isolable T-shaped planar pnictogen compounds R₃Pn were reported more than three decades ago and have been attracting burgeoning interest in recent years; T-shaped planar group 14 anions, isoelectronic to R₃Pn, however, are still unknown. Herein, we report the synthesis, full characterization, and reactivity of the first crystalline T-shaped planar group 14 anion 4 bearing a trinitrogen pincer ligand. DFT calculations indicate that the tricoordinate germanium center features both an unoccupied 4p orbital and two lone pairs of electrons. Its electron-rich nature allows for the nucleophilic attack on the methyl iodine giving methyl-substituted complex 5 and facile oxidation of the germanium center by elemental sulfur and selenium to furnish unpresented organic anions bearing terminal Ge[double bond, length as m-dash]Ch (Ch = S or Se) double bonds.

The emerging chemistry of the aluminyl anion

The chemistry of low valent p-block metal complexes continues to elicit interest in the research community, demonstrating reactivity that replicates and in some cases exceeds that of their more widely studied d-block metal counterparts. The introduction of the first aluminyl anion, a complex containing a formally anionic Al(I) centre charge balanced by an alkali metal (AM) cation, has established a platform for a new area of chemical research. The chemistry displayed by aluminyl compounds is expanding rapidly, with examples of reactivity towards a diverse range of small molecules and functional groups now reported in the literature. Herein we present an account of the structure and reactivity of the growing family of aluminyl compounds. In this context we examine the structural relationships between the aluminyl anion and the AM cations, which now include examples of AM = Li, Na, K, Rb and Cs. We report on the ability of these compounds to engage in bond-breaking and bond-forming reactions, which is leading towards their application as useful reagents in chemical synthesis. Furthermore we discuss the chemistry of bimetallic complexes containing direct Al-M bonds (M = Li, Na, K, Mg, Ca, Cu, Ag, Au, Zn) and compounds with Al-E multiple bonds (E = NR, CR₂, O, S, Se, Te), where both classes of compound are derived directly from aluminyl anions.

Structural Diversity in Divalent Group 14 Triflate Complexes Involving Endocyclic Thia-Macrocyclic Coordination

A highly unusual series of M(II) (M = Ge, Sn, Pb) complexes with endocyclic thioether macrocyclic coordination and with coordination numbers ranging from three to nine have been prepared by the reaction of [9]aneS₃ (1,4,7-trithiacyclononane), [12]aneS₄ (1,4,7,10-tetrathiacyclododecane), or [24]aneS₈ (1,4,7,10,13,16,19,22-octathiacyclotetracosane) with M(OTf)₂ (M = Sn and Pb; OTf = CF₃SO₃^-) or with GeCl₂·dioxane and 2 mol equiv of TMSOTf (Me₃SiO₃SCF₃) in a mixture of anhydrous CH₂Cl₂ and MeCN. The isolated bulk products are characterized by ¹H, ¹³C{¹H}, ¹⁹F{¹H}, and ¹¹⁹Sn{¹H} NMR and IR spectroscopy, high-resolution ESI⁺ MS, and microanalytical data. Crystal structures are also reported for [M(L)][OTf]₂ (M = Ge, Sn, Pb; L = [9]aneS₃, [12]aneS₄) and for [M([24]aneS₈)][OTf]₂ (M = Sn, Pb). In all cases, the ligand is bound in an endocyclic fashion, but the coordination environment and number are highly dependent on the group 14 ion, the macrocyclic ring size, and the number of S-donor atoms it presents. Solution NMR spectroscopic data suggest that the metal-macrocycle coordination is retained in solution but that the triflate anions are extensively dissociated on the NMR timescale. Density functional theory calculations on the [M([9]aneS₃)]²⁺ and [M([12]aneS₄)]²⁺ (M = Ge, Sn, Pb) dications reveal that the HOMO is centered on the group 14 atom as a directional "lone pair"; it also retains a significant amount of positive charge.

Tridentate NacNac Stabilized Tin and Nickel Complexes: Access to a Monomeric Nickel Hydride and Its Catalytic Application

The transmetalation reaction of picolyl-supported tridentate nacnac germylene monochloride [2,6-iPr₂-C₆H₃NC(Me)CHC(Me)NH(CH₂py)]GeCl (1) (py = pyridine) with SnCl₂ results in an analogous stannylene chloride (2). The three-coordinated stannylenium cation [{2,6-iPr₂-C₆H₃NC(Me)CHC(Me)NH(CH₂py)}Sn]⁺ with SnCl₃^- as a counteranion (3) has been generated through the abstraction of chloride ligand from 2 using an additional equivalent of SnCl₂. Instead of forming a donor-acceptor complex, 2 undergoes a facile redox transmetalation reaction with Ni(COD)₂ (COD = cyclooctadiene) and CuCl to afford analogous nickel and copper complexes [2,6-iPr₂-C₆H₃NC(Me)CHC(Me)NH(CH₂py)]MCl [M = Ni (4) and Cu (5)]. The reactions of 4 with potassium tri-sec-butylborohydride (commonly known as K-selectride) and AgSbF₆ provide access to monomeric Ni(II) hydride, [2,6-iPr₂-C₆H₃NC(Me)CHC(Me)NH(CH₂py)]NiH (6) and a Ni(II) cation, [{2,6-iPr₂-C₆H₃NC(Me)CHC(Me)NH(CH₂py)}Ni][SbF₆] (7), respectively. 6 was found to be an effective catalyst for the hydroboration of amides.

Neutral and Cationic Complexes of Silicon(IV) Halides with Phosphine Ligands

The reaction of SiI₄ and PMe₃ in n-hexane produced the yellow salt, [SiI₃(PMe₃)₂]I, confirmed from its X-ray structure, containing a trigonal bipyramidal cation with trans-phosphines. This contrasts with the six-coordination found in (the known) trans-[SiX₄(PMe₃)₂] (X = Cl, Br) complexes. The diphosphines o-C₆H₄(PMe₂)₂ and Et₂P(CH₂)₂PEt₂ form six-coordinate cis-[SiI₄(diphosphine)], which were also characterized by X-ray crystallography, multinuclear NMR, and IR spectroscopy. Reaction of trans-[SiX₄(PMe₃)₂] (X = Cl, Br) with Na[BAr^F] (BAr^F = [B{3,5-(CF₃)₂C₆H₃}₄]) produced five-coordinate [SiX₃(PMe₃)₂][BAr^F], but while Me₃SiO₃SCF₃ also abstracted chloride from trans-[SiCl₄(PMe₃)₂], the reaction products were six-coordinate complexes [SiCl₃(PMe₃)₂(OTf)] and [SiCl₂(PMe₃)₂(OTf)₂] with the triflate coordinated. X-ray crystal structures were obtained for [SiCl₃(PMe₃)₂][BAr^F] and [SiCl₂(PMe₃)₂(OTf)₂]. The charge distribution across the silicon species was also examined by natural bond orbital (NBO) analyses of the computed density functional theory (DFT) wavefunctions. For the [SiX₄(PMe₃)₂] and [SiX₃(PMe₃)₂]⁺ complexes, the positive charge on Si decreases and the negative charge on X decreases going from X = F to X = I. Upon going from [SiX₄(PMe₃)₂] to [SiX₃(PMe₃)₂]⁺, i.e., removal of X^–, there is an increase in positive charge on Si and a decrease in negative charge on the X centers (except for the case X = F). The positive charge on P shows a slight decrease.

Unusual neutral and monocationic silicon(IV) iodide complexes with soft phosphine coordination are formed in hydrocarbon solvents, while treatment of [SiCl₄(PMe₃)₂] with NaBAr^F forms the [SiCl₃(PMe₃)₂]⁺ cation; the electronic structures of [SiX₄(PMe₃)₂] and [SiX₃(PMe₃)₂]⁺ (X = F, Cl, Br, I) are probed using DFT calculations.

Isolation and Reactivity of Tetrylene-Tetrylone-Iron Complexes Supported by Bis(N-Heterocyclic Imine) Ligands

The germanium iron carbonyl complex 3 was prepared by the reaction of dimeric chloro(imino)germylene [IPrNGeCl]₂ (IPrN=bis(2,6-diisopropylphenyl)imidazolin-2-iminato) with one equivalent of Collman's reagent (Na₂ Fe(CO)₄ ) at room temperature. Similarly, the reaction of chloro(imino)stannylene [IPrNSnCl]₂ with Na₂ Fe(CO)₄ (1 equiv) resulted in the Fe(CO)₄ -bridged bis(stannylene) complex 4. We observed reversible formation of bis(tetrylene) and tetrylene-tetrylone character in complexes 3 vs. 5 and 4 vs. 6, which was supported by DFT calculations. Moreover, the Li/Sn/Fe trimetallic complex 12 has been isolated from the reaction of [IPrNSnCl]₂ with cyclopentadienyl iron dicarbonyl anion. The computational analysis further rationalizes the reduction pathway from these chlorotetrylenes to the corresponding complexes.

[N,N′-Di-tert-butyl-P,P-diphenylphosphinimidic Amidato-κN,κN′]chlorosilicon-κSi-tetracarbonyliron

The title complex {[Ph2P(tBuN)2](Cl)Si:->Fe(CO)4} (2) was synthesized via the reaction of chlorosilylene [Ph2P(tBuN)2]SiCl (1), supported by an iminophosphonamide ligand with Fe(CO)5 in THF. The molecular structure of 2 was fully characterized by NMR (1H, 13C, 29Si, and 31P) and IR spectroscopies, as well as single-crystal X-ray diffraction (SCXRD) analysis. In the SCXRD analysis of 2, the silylene ligand was located in the axial positions of the coordination sphere of the central iron atom and other sites were occupied by carbonyl ligands.

Gas-Phase Preparation of Subvalent Germanium Monoxide (GeO, X1+) via Non-Adiabatic Reaction Dynamics in the Exit Channel

The subvalent germanium monoxide (GeO, X¹Σ⁺) molecule has been prepared via the elementary reaction of atomic germanium (Ge, ³P_j) and molecular oxygen (O₂, X³Σ_g^-) with each reactant in its electronic ground state by means of single-collision conditions. The merging of electronic structure calculations with crossed beam experiments suggests that the formation of germanium monoxide (GeO, X¹Σ⁺) commences on the singlet surface through unimolecular decomposition of a linear singlet collision complex (GeOO, i1, C_∞v, ¹Σ⁺) via intersystem crossing (ISC) yielding nearly exclusively germanium monoxide (GeO, X¹Σ⁺) along with atomic oxygen in its electronic ground state [p1, O(³P)]. These results provide a sophisticated reaction mechanism of the germanium-oxygen system and demonstrate the efficient "heavy atom effect" of germanium in ISC yielding (nearly) exclusive singlet germanium monoxide and triplet atomic oxygen compared to similar systems (carbon dioxide and dinitrogen monoxide), in which non-adiabatic reaction dynamics represent only minor channels.

Halogen-Exchange Reactions of Iminophosphonamido-Chlorosilylenes with Alkali Halides: Convenient Synthesis of Heavier Halosilylenes

Halogen-substituted silylenes are an important building block for synthesizing silicon-based low-valent and multiple-bond species. However, the number of reports on heavier halosilylenes that contain bromine and iodine is still limited. Here, we present a convenient synthesis for bromo- and iodosilylenes supported by an iminophosphonamide ligand. The heavier halosilylenes [Ph₂P(^tBuN)₂]SiX (2: X = Br, 3: X = I) were successfully synthesized via the halogen-exchange reaction of chlorosilylene 1 with alkali halides in THF. As a demonstration of the reactivity of 2 and 3, oxidative addition reactions of 2 and 3 with elemental selenium in C₆D₆ afforded the corresponding bromo- (5) or iodosilylene-selone (6) as colorless crystals. The molecular structures of 2, 3, 5, and 6 were fully characterized by spectroscopic means and single-crystal X-ray diffraction analysis. Furthermore, the effects of the halogen atom on the electronic state of halosilylenes 1-3 and halosilylene-selones 4-6 were investigated using density functional theory (DFT) calculations.

Synthesis, Characterization, and Reaction of Digermylenes

A series of digermylenes R(EGeL)₂ (L=CH[C(Me)N(Ar)]₂, Ar=2,6‐iPr₂C₆H₃; E=O, R=1,3‐C₆H₄ (1), 1,4‐C₆H₄ (2), Me₂C(CH₂)₂ (3); E=NH, R=1,4‐C₆H₄ (4), 1,4‐C₆H₁₀ (5); E=C(O)O, R=1,3‐C₆H₄ (6)) were synthesized by the reactions of L′Ge (L′=HC[C(CH₂)N(Ar)]C(Me)N(Ar), Ar=2,6‐iPr₂C₆H₃) with selected diphenols, diol, diamines, and o‐/m‐phthalic acids, respectively. Treatment of digermylene 1,3‐C₆H₄(OGeL)₂ (1) with sulfur, selenium and CuX (X=Cl, Br, I) led to the formation of 1,3‐C₆H₄[OGe(S)L]₂ (8), 1,3‐C₆H₄[OGe(Se)L]₂ (9), and (CuX)₂[1,3‐C₆H₄(OGeL)₂]₂ (X=Cl (10), Br (11), I (12)), respectively. The obtained products were characterized by melting point, elemental analysis, FT‐IR, ¹H and ¹³C NMR spectroscopy, and single‐crystal X‐ray diffraction.

Oxidative Additions of C-F Bonds to the Silanide Anion [Si(C2 F5 )3 ]. Angew Chem Int Ed Engl 2022;61:e202116468. [PMID: 35107847 PMCID: PMC9310575 DOI: 10.1002/anie.202116468]

Compounds exhibiting main group elements in low oxidation states were found to mimic the reactivity of transition metal complexes. Like the latter, such main group species show a proclivity of changing their oxidation state as well as their coordination number by +2, therefore fulfilling the requirements for oxidative additions. Prominent examples of such main group compounds that undergo oxidative additions with organohalides R-X (R=alkyl, aryl, X=F, Cl, Br, I) are carbenes and their higher congeners. Aluminyl anions, which like carbenes and silylenes oxidatively add to strong σ-bonds in R-X species, have been recently discovered. We present the first anion based upon a Group 14 element, namely the tris(pentafluoroethyl)silanide anion, [Si(C2 F5 )3 ]- , which is capable of oxidative additions towards C-F bonds. This enables the isolation of non-chelated tetraorganofluorosilicate salts, which to the best of our knowledge had only been observed as reactive intermediates before.

Synthesis of alkynamides through reaction of alkyl- or aryl-substituted alkynylaluminums with isocyanates

An efficient and facile method for the preparation of alkynamides through Et₃N-catalyzed alumination of alkyl- or aryl-substituted terminal alkynes with AlMe₃ and sequential nucleophilic addition of in situ generated alkynylaluminums to isocyanates is described. This method has the merits of using readily available isocyanates and monosubstituted alkynes, easy access to organoaluminums, short reaction times, and high efficiency. A gram-scale synthesis of the desired alkynamide and its application to the formation of α-methylene-β-lactams demonstrates the synthetic utility of this method.

Controlling Al- Interactions in Group 1 Metal Aluminyls ( = Li, Na, and K). Facile Conversion of Dimers to Monomeric and Separated Ion Pairs

The aluminyl compounds [M{Al(NON^Dipp)}]₂ (NON^Dipp = [O(SiMe₂NDipp)₂]^2-, Dipp = 2,6-iPr₂C₆H₃), which exist as contacted dimeric pairs in both the solution and solid states, have been converted to monomeric ion pairs and separated ion pairs for each of the group 1 metals, M = Li, Na, and K. The monomeric ion pairs contain discrete, highly polarized Al-M bonds between the aluminum and the group 1 metal and have been isolated with monodentate (THF, M = Li and Na) or bidentate (TMEDA, M = Li, Na, and K) ligands at M. The separated ion pairs comprise group 1 cations that are encapsulated by polydentate ligands, rendering the aluminyl anion, [Al(NON^Dipp)]^- "naked". For M = Li, this structure type was isolated as the [Li(TMEDA)₂]⁺ salt directly from a solution of the corresponding contacted dimeric pair in neat TMEDA, while the polydentate [2.2.2]cryptand ligand was used to generate the separated ion pairs for the heavier group 1 metals M = Na and K. This work shows that starting from the corresponding contacted dimeric pairs, the extent of the Al-M interaction in these aluminyl systems can be readily controlled with appropriate chelating reagents.

An Isolable Gallium-Substituted Nitrilimine and its Reactivity with B-H, Si-H and B-B Bonds

Reaction of the Ga(I) compound NacNacGa (9) with the diazo compound N₂ CHSiMe₃ affords the nitrilimine compound NacNacGa(N-NCSiMe₃ )(CH₂ SiMe₃ ) (10). Carrying out this reaction in the presence of pyridine does not lead to C-H activation on the transient alkylidene NacNacGa=CHSiMe₃ but generates a metallated diazo species NacNacGa(NHN=CHSiMe₃ )(CN₂ SiMe₃ ) (13) that further rearranges into the isonitrile compound NacNacGa(NHN=CHSiMe₃ )(N(NC)SiMe₃ ) (15). Reactions of 10 with the silane H₃ SiPh and the borane HBcat furnished products of 1,3 addition to the nitrilimine moiety NacNacGa{N(ER_n )NCSiMe₃ }(CH₂ SiMe₃ ), whereas reaction with the diborane B₂ cat₂ gave the product of formal nitrene insertion into the B-B bond. DFT calculations suggest that the interaction of 9 with N₂ CHSiMe₃ proceeds through intermediate formation of an alkylidene compound that undergoes CH activation with a second molecule of N₂ CHSiMe₃ . Insertion into the B-B bond likely proceeds through an initial 1,3-addition of the diborane, followed by boryl migration to the former nitrene center.

A square planar silylene nickel four-membered ring

Herein the new nickel silylene [PhC(NtBu)₂SiNi(C₅Me₅)]₂, which features a square planar central ring motif consisting of two silicon and two nickel atoms is presented. The title compound was obtained by an insertion of the Ni(0) precursor [Ni(cod)₂] (cod = 1,5-cyclooctadiene) in the Si-C bond of the silylene [PhC(NtBu)₂Si(C₅Me₅)]. Analytic characterisation including mass spectrometry as well as IR and Raman spectroscopies was combined with quantum chemical calculations to get an insight on the bonding situation within the four-membered Si-Ni-ring.

Contrasting the Mechanism of H2 Activation by Monomeric and Potassium-Stabilized Dimeric AlI Complexes: Do Potassium Atoms Exert any Cooperative Effect?

Aluminyl anions are low-valent, anionic, and carbenoid aluminum species commonly found stabilized with potassium cations from the reaction of Al-halogen precursors and alkali compounds. These systems are very reactive toward the activation of σ-bonds and in reactions with electrophiles. Various research groups have detected that the potassium atoms play a stabilization role via electrostatic and cation ⋯ π interactions with nearby (aromatic)-carbocyclic rings from both the ligand and from the reaction with unsaturated substrates. Since stabilizing K⋯H bonds are witnessed in the activation of this class of molecules, we aim to unveil the role of these metals in the activation of the smaller and less polarizable H₂ molecule, together with a comprehensive characterization of the reaction mechanism. In this work, the activation of H₂ utilizing a NON-xanthene-Al dimer, [K{Al(NON)}]₂ (D) and monomeric, [Al(NON)]^- (M) complexes are studied using density functional theory and high-level coupled-cluster theory to reveal the potential role of K⁺ atoms during the activation of this gas. Furthermore, we aim to reveal whether D is more reactive than M (or vice versa), or if complicity between the two monomer units exits within the D complex toward the activation of H₂ . The results suggest that activation energies using the dimeric and monomeric complexes were found to be very close (around 33 kcal mol^-1 ). However, a partition of activation energies unveiled that the nature of the energy barriers for the monomeric and dimeric complexes are inherently different. The former is dominated by a more substantial distortion of the reactants (and increased interaction energies between them). Interestingly, during the oxidative addition, the distortion of the Al complex is minimal, while H₂ distorts the most, usually over 0.77 Δ E d i s t ≠ . Overall, it is found here that electrostatic and induction energies between the complexes and H₂ are the main stabilizing components up to the respective transition states. The results suggest that the K⁺ atoms act as stabilizers of the dimeric structure, and their cooperative role on the reaction mechanism may be negligible, acting as mere spectators in the activation of H₂ . Cooperation between the two monomers in D is lacking, and therefore the subsequent activation of H₂ is wholly disengaged.

Reactions of Iso(thio)cyanates with Dialanes: Cycloaddition, Reductive Coupling, or Cleavage of the C═S or C═O Bond

The dialanes [(dpp-Bian)Al-Al(dpp-Bian)] (1) and [(dpp-dad)Al(THF)-(THF)Al(dpp-dad)] (2) (dpp-Bian = 1,2-[(2,6-iPr₂C₆H₃)NC]₂C₁₂H₆, dpp-dad = [(2,6-iPr₂C₆H₃)NC(CH₃)]₂) react with some isothiocyanates, isocyanates, and diphenylketene via [2 + 4] cycloaddition of the C═O or C═S bond across the C═C-N-Al fragment to afford complexes [L(X═C-Y)Al-Al(X═C-Y)L] with an intact Al-Al single bond (3, L = dpp-Bian, X = PhN, Y = O; 4, L = dpp-Bian, X = Ph₂C, Y = O; 6, L = dpp-dad, X = BnN, Y = S; 7, L = dpp-dad, X = tBuN, Y = O; 8, L = dpp-dad, X = iPrN, Y = S; and 9, L = dpp-dad, X = CyN, Y = S). A mixed C═N and C═O mode cycloadduct, [(dpp-Bian)(TosN═C-O)Al-Al(TosN-C═O)(dpp-Bian)] 5, was obtained in the reaction of 1 with tosylisocyanate. Heating the solution of 3 resulted in a thermal transformation and a change of the cycloaddition mode from C═O to C═N to give the product [(dpp-Bian)(PhN-C═O)Al(O)Al(PhN-C═O)(dpp-Bian)] 10. The reduction of 7 and 8 with Na yielded the products [Na(THF)_n]₂[(dpp-dad^-H)(X═C-Y)Al]₂ (12, X = iPrN, Y = S, n = 2 and 13, X = tBuN, Y = O, n = 3) in which one of the methyl groups of the backbone of the initial dpp-dad ligand was dehydrogenated. When 2 was reacted with the bulky adamantyl isocyanate AdNCO, the C-C coupling of two substrates occurred to form 14 [(dpp-dad)Al(O═C-NAd)₂Al(dpp-dad)] in which the coupled dianionic oxamide ligand bridged two Al atoms in a μ,η⁴-N,O/N,O mode. Moreover, in the presence of 2.0 equiv of Na metal, precursor 2 reacts with tBuNCS, p-TolylNCS, or Me₃SiNCO, possibly through the reduced Al^I intermediate, to yield the sulfur- or oxygen-bridged dimer [Na(solv)_n]₂[(dpp-dad)Al(μ-E)]₂ (15, E = S, solv = THF, n = 3 and 16, E = O, solv = DME, n = 2) upon C═S or C═O bond cleavage. Dialane 1 reacts with dimethylsulfone to give a Lewis adduct [(dpp-Bian)(Me₂SO₂)Al]₂ (17), which releases dimethylsulfone upon heating. The diamagnetic compounds 3-10 and 12-17 were characterized by NMR and IR spectroscopy. The molecular structures of 3-17 were established by single-crystal X-ray diffraction analysis. Electronic structures of the compounds and possible isomers have been examined by DFT calculations.

Heavier element-containing aromatics of [4n+2]-electron systems

While the implication of the aromaticity concept has been dramatically expanded to date since its emergence in 1865, the classical [4n+2]/4n-electron counting protocol still plays an essential role in evaluating the aromatic nature of compounds. Over the last few decades, a variety of heavier heterocycles featuring the formal [4n+2] π-electron arrangements have been developed, which allows for assessing their aromatic nature. In this review, we present recent developments of the [4n+2]-electron systems of heavier heterocycles involving group 13-15 elements. The synthesis, spectroscopic data, structural parameters, computational data, and reactivity are introduced.

Formation of silaimines from a sterically demanding iminophosphonamido chlorosilylene via intramolecular N-P bond cleavage

The sterically demanding iminophosphonamido chlorosilylene [Ph2P(DipN)2]SiCl (Dip = 2,6-diisopropylphenyl) was synthesized and fully characterized using NMR spectroscopy and X-ray crystallography. Substitution reactions of [Ph2P(DipN)2]SiCl with N- and Fe-nucleophiles led to the unexpected formation of the corresponding silaimine derivatives. This process involves the ring-opening rearrangement of three-coordinated silylene intermediates that proceeds via intramolecular N-P bond cleavage.

Activation and modification of carbon dioxide by redox-active low-valent gallium species

The activation of carbon dioxide by metallylene [(dpp-bian)GaNa(DME)2] (dpp-bian = 1,2-bis[(2,6-di-isopropylphenyl)imino]acenaphthene) under mild conditions is described. Furthermore, the reaction of the activation complex [(dpp-bian)Ga(CO2)2Ga(dpp-bian)][Na(DME)2]2 (2) with diphenylketene, cyclohexyl isocyanate, and phenyl isocyanate leads to the elimination of carbon monoxide and the formation of derivatives of oxocarboxylic acid [(dpp-bian)GaOC(O)C(Ph)2C(CPh2)O][Na(DME)2] (6) and carbamate derivatives [(dpp-bian)GaN(Cy)C(O)N(Cy)C(O)O]2[Na(DME)2]2 (7) and [(dpp-bian)GaN(Ph)C(O)O]2[Na(DME)2]2 (8), respectively. Complexes have been characterized by NMR, IR spectroscopy, elemental analysis, and X-ray diffraction analysis. Their electronic structures have been examined by DFT calculations. The possible mechanism of the modification reaction is proposed and supported by the investigation of 13CO2-enriched samples and DFT calculations.

Mechanistic Insights into Activation of Carbon Monoxide, Carbon Dioxide, and Nitrous Oxide by Acyclic Silylene

Owing to an empty p orbital and a lone pair of electrons on the Si center, silylene exhibits reactivity similar to a transition-metal system capable of activating H₂/C-H bonds and small molecules. In this work, with the aid of density functional theory calculations, we systematically investigated the reactions of an acyclic silylene with CO, CO₂, and N₂O. The detailed mechanisms obtained lead to an in-depth understanding of the silylene single-site ambiphilic reactivity.

Stabilization of group 14 elements E = C, Si, Ge by hetero-bileptic ligands cAAC, MCOn with push-pull mechanism

The stability and bonding of a series of hetero-diatomic molecules with general formula (cAAC)EM(CO)_n , where cAAC = cyclic alkyl(amino) carbene; E = group 14 elements (C, Si, and Ge); M = transition metal (Ni, Fe, and Cr) have been studied by quantum chemical calculations using density functional theory (DFT) and energy decomposition analysis-natural orbital chemical valence (EDA-NOCV). The equilibrium geometries were calculated at the BP86/def2-TZVPP level of theory. The tri-coordinated group 14 complex (1a, 4a, and 7a) in which one of the CO groups is migrated to the central group 14 element from adjacent metal is theoretically found to be more stable when the central atom (E) is carbon. On the other hand, the two-coordinate group 14 element containing metal-complexes (2, 5, 8, 3, 6, and 9) are found to be more stable with their corresponding heavier analogues. The electronic structures of all the molecules have been analyzed by molecular orbital, topological analysis of electron density and natural bond orbital (NBO) analysis at the M06/def2-TZVPP//BP86/def2-TZVPP level of theory. The nature of the cAACE and EM bonds has been studied by EDA-NOCV calculations at BP86-D3(BJ)/TZ2P level of theory. The EDA analysis suggests that the bonding of cAACC(CO) can be best represented by electron sharing σ and π interactions, whereas, C(CO)M(CO)_n-1 by dative σ and π interactions. On the other hand, EDA-NOCV calculations suggests both dative σ and π interactions for cAACE and EM(CO)_n bonds of the corresponding Si and Ge analogues having stronger σ- and relatively weaker π-bonds. The topological analysis of electron density supports the closed-shell interaction for the Si and Ge complexes and open-shell interaction for the carbon complexes. The calculated proton affinity and hydride affinity values corroborated well with the present bonding description. This class of complexes might act as efficient future catalysts for different organic transformations due to the presence of electron rich group 14 element and metal carbonyl.

Interconversion between a silaimine and an aminosilylene supported by an iminophosphonamide ligand

The reaction of a chlorosilylene, supported by an iminophosphonamide ligand, with KN(SiMe₃)₂ resulted in the formation of a silaimine instead of the expected aminosilylene. However, this silaimine exists in equilibrium with the corresponding aminosilylene, which was experimentally demonstrated using variable-temperature NMR spectroscopy and a trapping reaction with elemental selenium to give a silaselenourea.

Selective Cross-Coupling of Unsaturated Substrates on AlI

The Al^I compound NacNacAl (1, NacNac = [ArNC(Me)CHC(Me)NAr]^- , Ar = 2,6-iPr₂ C₆ H₃ ) serves as a template for the chemoselective coupling between carbonyls (benzophenone, fenchone, isophorone, p-tolyl benzoate, N,N-dimethylbenzamide, (1-phenylethylidene)aniline) and pyridine. With the CH-acidic ketone (1R)-(+) camphor, the reaction affords a hydrido alkoxide compound of Al, formed as the result of enolization, whereas an enolizable imine, (1-phenylethylidene)aniline, and the bulky ketone isophorone, still chemoselectively couple with pyridine. In contrast, reaction with the ester p-tolyl benzoate results in cleavage of the ester bond together with replacement of the alkoxy group by a hydrogen atom of the pyridine moiety. This study demonstrates that for carbonyl substrates featuring phenyl substituents, the reaction proceeds via intermediate formation of η² (C,X)-coordinated (X = O, N) carbonyl adducts, whereas the reaction of 1 with (R)-(-)-fenchone in the absence of pyridine leads to CH activation in the pendant isopropyl group of the Ar substituent of the NacNac ligand.

Oxidative Addition of Hydridic, Protic, and Nonpolar E-H Bonds (E = Si, P, N, or O) to an Aluminyl Anion

The aluminyl anion K[Al(NON^Dipp)] {NON^Dipp = [O(SiMe₂NDipp)₂]^2-; Dipp = 2,6-iPr₂C₆H₃} engages in oxidative additions with the E-H (E = Si, P, N, or O) bonds of phenylsilane (PhSiH₃), mesityl phosphane (MesPH₂; Mes = 2,4,6-Me₃C₆H₂), 2,6-di-iso-propylaniline (DippNH₂), and 2,6-di-tert-butyl-4-methylphenol (ArOH). The resulting (hydrido)aluminate salts are formed regardless of the E-H bond polarity. All of the products were characterized by nuclear magnetic resonance and infrared spectroscopic techniques and single-crystal X-ray diffraction. This study highlights the versatility of aluminyl anions to activate hydridic, acidic, and (essentially) nonpolar E-H bonds.

σ or π? Bonding interactions in a series of rhenium metallotetrylenes

Salt metathesis reactions between a low-valent rhenium(i) complex, Na[Re(η5-Cp)(BDI)] (BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate), and a series of amidinate-supported tetrylenes of the form ECl[PhC(NtBu)2] (E = Si, Ge, Sn) led to rhenium metallotetrylenes Re(E[PhC(NtBu)2])(η5-Cp)(BDI) (E = Si (1a), Ge (2), Sn (4)) with varying extents of Re-E multiple bonding. Whereas the rhenium-stannylene 4 adopts a σ-metallotetrylene arrangement featuring a Re-E single bond, the rhenium-silylene (1a) and -germylene (2) both engage in π-interactions to form short Re-E multiple bonds. Temperature was found to play a crucial role in reactions between Na[Re(η5-Cp)(BDI)] and SiCl[PhC(NtBu)2], as manipulation of reaction conditions led to isolation of an unusual rhenium-silane, (BDI)Re(μ-η5:η1-C5H4)(SiH[PhC(NtBu)2]) (1b) and a dinitrogen bridged rhenium-silylene, (η5-Cp)(BDI)Re(μ-N2)Si[PhC(NtBu)2] (1c), in addition to 1a. Finally, the reaction of Na[Re(η5-Cp)(BDI)] with GeCl2·dioxane led to a rare μ2-tetrelido complex, μ2-Ge[Re(η5-Cp)(BDI)]2 (3). Bonding interactions within these complexes are discussed through the lens of various spectroscopic, structural, and computational investigations.

N-Heterocyclic silylenes as ambiphilic activators and ligands

Recent developments of the use of N-heterocyclic silylenes (NHSis), higher homologues of Arduengo-carbenes, as ambiphilic activators and ligands are highlighted and a comparison of NHSi ligands with NHC and phosphine ligands is provided.

Two-Electron Reduction of a U(VI) Complex with Al(C5Me5)

The reduction of U(VI) to U(IV) is rare, especially in one step, and not observed electrochemically as a one-wave, two-electron couple. Here, we demonstrate that reduction of the uranium(VI) bis(imido) complex, (C₅Me₅)₂U[═N(4-OⁱPrC₆H₄)]₂, is readily accomplished with Al(C₅Me₅), forming the bridging uranium(IV)/aluminum(III) imido complex (C₅Me₅)₂U[μ₂-N(4-OⁱPrC₆H₄)]₂Al(C₅Me₅). The structure and bonding of the bridging imido complex is examined with electrochemical measurements in tandem with density functional theory calculations.

Bonding Relationship between Silicon and Germanium with Group 13 and Heavier Elements of Groups 14-16

The topic of heavier main group compounds possessing multiple bonds is the subject of momentous interest in modern organometallic chemistry. Importantly, there is an excitement involving the discovery of unprecedented compounds with unique bonding modes. The research in this area is still expanding, particularly the reactivity aspects of these compounds. This article aims to describe the overall developments reported on the stable derivatives of silicon and germanium involved in multiple bond formation with other group 13, and heavier groups 14, 15, and 16 elements. The synthetic strategies, structural features, and their reactivity towards different nucleophiles, unsaturated organic substrates, and in small molecule activation are discussed. Further, their physical and chemical properties are described based on their spectroscopic and theoretical studies.

Shedding Light on the Diverse Reactivity of NacNacAl with N-Heterocycles

The aluminum(I) compound NacNacAl (NacNac=[ArNC(Me)CHC(Me)NAr]^- , Ar=2,6-iPr₂ C₆ H₃ , 1) shows diverse and substrate-controlled reactivity in reactions with N-heterocycles. 4-Dimethylaminopyridine (DMAP), a basic substrate in which the 4-position is blocked, induces rearrangement of NacNacAl by shifting a hydrogen atom from the methyl group of the NacNac backbone to the aluminum center. In contrast, C-H activation of the methyl group of 4-picoline takes place to produce a species with a reactive terminal methylene. Reaction of 1 with 3,5-lutidine results in the first example of an uncatalyzed, room-temperature cleavage of an sp² C-H bond (in the 4-position) by an Al^I species. Another reactivity mode was observed for quinoline, which undergoes 2,2'-coupling. Finally, the reaction of 1 with phthalazine produces the product of N-N bond cleavage.