Sterilization of liposomes by heat treatment

The Chemical Reactivity of Membrane Lipids

It is well-known that aqueous dispersions of phospholipids spontaneously assemble into bilayer structures. These structures have numerous applications across chemistry and materials science and form the fundamental structural unit of the biological membrane. The particular environment of the lipid bilayer, with a water-poor low dielectric core surrounded by a more polar and better hydrated interfacial region, gives the membrane particular biophysical and physicochemical properties and presents a unique environment for chemical reactions to occur. Many different types of molecule spanning a range of sizes, from dissolved gases through small organics to proteins, are able to interact with membranes and promote chemical changes to lipids that subsequently affect the physicochemical properties of the bilayer. This Review describes the chemical reactivity exhibited by lipids in their membrane form, with an emphasis on conditions where the lipids are well hydrated in the form of bilayers. Key topics include the following: lytic reactions of glyceryl esters, including hydrolysis, aminolysis, and transesterification; oxidation reactions of alkenes in unsaturated fatty acids and sterols, including autoxidation and oxidation by singlet oxygen; reactivity of headgroups, particularly with reactive carbonyl species; and E/Z isomerization of alkenes. The consequences of reactivity for biological activity and biophysical properties are also discussed.

Use of niosomes for the treatment of intracellular pathogens infecting the lungs

The delivery of drugs in an encapsulated environment is designed to precisely target specific tissues, avoiding a systemic circulation of the drug. Lungs are organs exposed to the environment with multiple defense barriers. However, many pathogens can still colonize and infect the airways bypassing the hostile environment of the lungs. In more complicated situations, some pathogens have developed strategies to multiply and survive within macrophages, one of the first immune cell responses to clearing infections in mammals. Niosomes are artificial vesicles that can be loaded with drugs, offering an alternative strategy to treat intracellular pathogens as nanocarriers. Members of the mycobacteria genus are intracellular pathogens that have evolved to escape the immunological response, specifically in macrophages, the white cells responsible for the clearance of pathogens. This review analyzed the state-of-the-art niosome synthesis aimed at tackling the problem of intracellular pathogen therapy. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Outer Membrane Vesicles: Biogenesis, Functions, and Issues

This review focuses on nonlytic outer membrane vesicles (OMVs), a subtype of bacterial extracellular vesicles (BEVs) produced by Gram-negative organisms focusing on the mechanisms of their biogenesis, cargo, and function. Throughout, we highlight issues concerning the characterization of OMVs and distinguishing them from other types of BEVs. We also highlight the shortcomings of commonly used methodologies for the study of BEVs that impact the interpretation of their functionality and suggest solutions to standardize protocols for OMV studies.

Red blood cells membrane-derived nanoparticles: Applications and key challenges in their clinical translation

Cellular membrane-derived nanoparticles, particularly of red blood cells (RBCs), represent an emerging class of drug delivery systems. The lack of nucleus and organelles in these cells makes them easy to process and empty out intracellular contents. The empty vesicle membranes can then be either used as a coating on nanoparticles or can be reassembled into a nanovesicle. Engineered RBCs membrane has unique ability to retain its lipid bilayer architecture with host's proteins during top-down approach, thus allowing it to form stable nanoformulations mimicking RBCs stealth properties. In addition, its core-shell structure allows loading of different drug molecules, and its surface chemistry can be manipulated by facile conjugation with ligands on the shell. The remarkable ability of RBCs membrane to fuse with membranes of other cells enables the formation of hybrid nanovesicles. In this review, we highlight the biomedical applications of such vesicles and discuss the potential challenges related to its clinical translation. Although nano-RBCs retain much of the host's proteins, which may give an edge over synthetic nanoparticles in terms of lower immunogenicity, its production at industrial level is more challenging. This review gives the critical analysis of barriers involved in the translation of RBCs-derived nanoparticles from preclinical to clinical level. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Biology-Inspired Nanomaterials > Lipid-Based Structures Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Insights into Terminal Sterilization Processes of Nanoparticles for Biomedical Applications

Nanoparticles possess a huge potential to be employed in numerous biomedical purposes; their applications may include drug delivery systems, gene therapy, and tissue engineering. However, the in vivo use in biomedical applications requires that nanoparticles exhibit sterility. Thus, diverse sterilization techniques have been developed to remove or destroy microbial contamination. The main sterilization methods include sterile filtration, autoclaving, ionizing radiation, and nonionizing radiation. Nonetheless, the sterilization processes can alter the stability, zeta potential, average particle size, and polydispersity index of diverse types of nanoparticles, depending on their composition. Thus, these methods may produce unwanted effects on the nanoparticles' characteristics, affecting their safety and efficacy. Moreover, each sterilization method possesses advantages and drawbacks; thus, the suitable method's choice depends on diverse factors such as the formulation's characteristics, batch volume, available methods, and desired application. In this article, we describe the current sterilization methods of nanoparticles. Moreover, we discuss the advantages and drawbacks of these methods, pointing out the changes in nanoparticles' biological and physicochemical characteristics after sterilization. Our main objective was to offer a comprehensive overview of terminal sterilization processes of nanoparticles for biomedical applications.

Sterilization methods of liposomes: Drawbacks of conventional methods and perspectives

Liposomes are targeted drug delivery systems that are of great pharmaceutical and therapeutic interest. Parenteral route is the main way used for liposome administration. In this case, their sterility is a requirement. However, due to the particular sensitivity of liposomes and their tendency to physicochemical alterations, their sterilization remains a real challenge. Conventional sterilization methods such as heat, ethylene oxide, ultraviolet and gamma irradiations are considered as unsuitable for liposome sterilization and the recommended methods for obtaining sterility of liposomes are filtration and aseptic manufacturing. Unfortunately, these recommended methods are not without limitations. This review outlines the difficulties associated with the use of these different classical methods for obtaining liposome sterility. The effects on liposome physicochemical and biopharmaceutical characteristics as well as efficacy, toxicity and practical problems of these sterilization techniques have been discussed. The search for an alternative method being therefore necessary, the applicability of supercritical carbon dioxide (ScCO₂) technology, which is nowadays a promising strategy for the sterilization of sensitive products such as liposomes, is also examined. It appears from this analysis that ScCO₂ could effectively be an interesting alternative to achieve sterility of liposomes, but for this, sterilization assays including challenge tests and optimization studies are needed.

Application of Nanotechnology in the COVID-19 Pandemic

COVID-19, caused by SARS-CoV-2 infection, has been prevalent worldwide for almost a year. In early 2000, there was an outbreak of SARS-CoV, and in early 2010, a similar dissemination of infection by MERS-CoV occurred. However, no clear explanation for the spread of SARS-CoV-2 and a massive increase in the number of infections has yet been proposed. The best solution to overcome this pandemic is the development of suitable and effective vaccines and therapeutics. Fortunately, for SARS-CoV-2, the genome sequence and protein structure have been published in a short period, making research and development for prevention and treatment relatively easy. In addition, intranasal drug delivery has proven to be an effective method of administration for treating viral lung diseases. In recent years, nanotechnology-based drug delivery systems have been applied to intranasal drug delivery to overcome various limitations that occur during mucosal administration, and advances have been made to the stage where effective drug delivery is possible. This review describes the accumulated knowledge of the previous SARS-CoV and MERS-CoV infections and aims to help understand the newly emerged SARS-CoV-2 infection. Furthermore, it elucidates the achievements in developing COVID-19 vaccines and therapeutics to date through existing approaches. Finally, the applicable nanotechnology approach is described in detail, and vaccines and therapeutic drugs developed based on nanomedicine, which are currently undergoing clinical trials, have presented the potential to become innovative alternatives for overcoming COVID-19.

Liposomes as vehicles for topical ophthalmic drug delivery and ocular surface protection

Introduction: The development of ophthalmic formulations able to deliver hydrophilic and hydrophobic drugs to the inner structures of the eye and restore the preocular tear film has been a leading topic of discussion over the last few years. In this sense, liposomes represent a suitable strategy to achieve these objectives in ocular drug delivery.Areas covered: Knowledge of the different physiological and anatomical eye structures, and specially the ocular surface are critical to better understanding and comprehending the characteristics required for the development of topical ophthalmic liposomal formulations. In this review, several features of liposomes are discussed such as the main materials used for their fabrication, basic structure and preparation methods, from already established to novel techniques, allowing the control and design of special characteristics. Besides, physicochemical properties, purification processes and strategies to overcome delivery or encapsulation challenges are also presented. Expert opinion: Regarding ocular drug delivery of liposomes, there are some features that can be redesigned. Specific biocompatible and biodegradable materials presenting therapeutic properties, such as lipidic compounds or polymers significantly change the way of tackling ophthalmic diseases. Besides, liposomes entail an effective, safe and versatile strategy for the treatment of diseases in the clinical practice.

Hybrid Vesicle Stability under Sterilisation and Preservation Processes Used in the Manufacture of Medicinal Formulations

Sterilisation and preservation of vesicle formulations are important considerations for their viable manufacture for industry applications, particular those intended for medicinal use. Here, we undertake an initial investigation of the stability of hybrid lipid-block copolymer vesicles to common sterilisation and preservation processes, with particular interest in how the block copolymer component might tune vesicle stability. We investigate two sizes of polybutadiene-block-poly(ethylene oxide) polymers (PBd₁₂-PEO₁₁ and PBd₂₂-PEO₁₄) mixed with the phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) considering the encapsulation stability of a fluorescent cargo and the colloidal stability of vesicle size distributions. We find that autoclaving and lyophilisation cause complete loss of encapsulation stability under the conditions studied here. Filtering through 200 nm pores appears to be viable for sterilisation for all vesicle compositions with comparatively low release of encapsulated cargo, even for vesicle size distributions which extend beyond the 200 nm filter pore size. Freeze-thaw of vesicles also shows promise for the preservation of hybrid vesicles with high block copolymer content. We discuss the process stability of hybrid vesicles in terms of the complex mechanical interplay between bending resistance, stretching elasticity and lysis strain of these membranes and propose strategies for future work to further enhance the process stability of these vesicle formulations.

Current developments and applications of microfluidic technology toward clinical translation of nanomedicines

Nanoparticulate drug delivery systems hold great potential for the therapy of many diseases, especially cancer. However, the translation of nanoparticulate drug delivery systems from academic research to industrial and clinical practice has been slow. This slow translation can be ascribed to the high batch-to-batch variations and insufficient production rate of the conventional preparation methods, and the lack of technologies for rapid screening of nanoparticulate drug delivery systems with high correlation to the in vivo tests. These issues can be addressed by the microfluidic technologies. For example, microfluidics can not only produce nanoparticles in a well-controlled, reproducible, and high-throughput manner, but also create 3D environments with continuous flow to mimic the physiological and/or pathological processes. This review provides an overview of the microfluidic devices developed to prepare nanoparticulate drug delivery systems, including drug nanosuspensions, polymer nanoparticles, polyplexes, structured nanoparticles and theranostic nanoparticles. We also highlight the recent advances of microfluidic systems in fabricating the increasingly realistic models of the in vivo milieu for rapid screening of nanoparticles. Overall, the microfluidic technologies offer a promise approach to accelerate the clinical translation of nanoparticulate drug delivery systems.

Humid Heat Autoclaving of Hybrid Nanoparticles Achieved by Decreased Nanoparticle Concentration and Improved Nanoparticle Stability Using Medium Chain Triglycerides as a Modifier

PURPOSE

Humid heat autoclaving is a facile technique widely used in the sterilization of injections, but the high temperature employed would destroy nanoparticles composed of biodegradable polymers. The aim of this study was to investigate whether incorporation of medium chain triglycerides (MCT) could stabilize nanoparticles composed of poly (ethylene glycol)-b-polycaprolactone (PEG-b-PCL) during autoclaving (121°C, 10 min).

METHODS

Polymeric nanoparticles with different MCT contents were prepared by dialysis. Block copolymer degradation was studied by GPC. The critical aggregation concentrations of nanoparticles at different temperatures were determined using pyrene fluorescence. The size, morphology and weight averaged molecular weight of pristine/autoclaved nanoparticles were studied using DLS, TEM and SLS, respectively. Drug loading content and release profile were determined using RP-HPLC.

RESULTS

The protecting effect of MCT on nanoparticles was dependent on the amount of MCT incorporated. Nanoparticles with high MCT contents, which assumed an emulsion-like morphology, showed reduced block copolymer degradation and particle disassociation after incubation at 100°C for 24 h. Nanoparticles with high MCT content showed the lowest critical aggregation concentration (CAC) under either room temperature or 60°C and the lowest particle concentration among all samples. And the particle size, drug loading content, physical stability and release profile of nanoparticles with high MCT contents remained nearly unchanged after autoclaving.

CONCLUSION

Incorporation of high amount of MCT changed the morphology of PEG-b-PCL based nanoparticles to an emulsion-like structure and the nanoparticles prepared could withstand autoclaving due to improved particle stability and decreased particle concentration caused by MCT incorporation.

Impact of ionizing radiation on physicochemical and biological properties of an amphiphilic macromolecule

An amphiphilic macromolecule (AM) was exposed to ionizing radiation (both electron beam and gamma) at doses of 25 kGy and 50 kGy to study the impact of these sterilization methods on the physicochemical properties and bioactivity of the AM. Proton nuclear magnetic resonance and gel permeation chromatography were used to determine the chemical structure and molecular weight, respectively. Size and zeta potential of the micelles formed from AMs in aqueous media were evaluated by dynamic light scattering. Bioactivity of irradiated AMs was evaluated by measuring inhibition of oxidized low-density lipoprotein uptake in macrophages. From these studies, no significant changes in the physicochemical properties or bioactivity were observed after the irradiation, demonstrating that the AMs can withstand typical radiation doses used to sterilize materials.

Sterilization stability of vesicular phospholipid gels loaded with cytarabine for brain implant

The aim of this study was to investigate the sterilization stability of cytarabine (Ara-C) loaded vesicular phospholipid gels (VPGs). VPGs were prepared by high pressure homogenization method intended for the treatment of glioblastoma multiforme (GBM) in brain as injectable implant. The particle size of VPGs after redispersion was 119.6 ± 66.24 nm, and entrapment efficiency (EE) was 32.6 ± 2.1%. Drug release in vitro from VPGs sustained for 80 h with 48.1% initial release within 1h, and rheological studies demonstrated a gel-like behavior. Comparatively, after autoclaved sterilization, increased particle size and EE were obtained as 165.6 ± 71.89 nm and 62.6 ± 2.3%, respectively. Additionally, characteristics of drug release were significantly altered with obviously prolonged release time to 450 h and remarkable reduced initial release to 24.7%. Also, the viscoelasticity was reinforced with clearly decreased fluidity. This result could be explained by the fusion of small vesicles witnessed in TEM observation, which resulted in percentages change of vesicle groups with different size. However, reduced Ara-C and increased lysophosphatidylcholine (LPC) were observed. Among the stabilizers, addition of sodium sulfite showed best effects with high stability of Ara-C and phospholipids. This may be explained by the presence of SO(3)(-), free radicals produced by sodium sulfite. Being an hydroxyl radical scavenger, it can reduce the generation of HO free radicals. These results show that, with addition of appropriate stabilizers, VPGs can be autoclaved with high stability, and it is a promising dosage form for treatment of GBM after injection into resectable or nonresectable neoplasms with sustained release properties.

Niosomes in sustained and targeted drug delivery: some recent advances

Niosomes represent an emerging class of novel vesicular systems. They are composed of nonionic surfactants which are biodegradable and relatively nontoxic. They were developed as stable and inexpensive alternatives to liposomes. Since their early introduction to cosmetic industry their role has diversified to other application areas. They are now being ardently explored as potential carriers for sustained and targeted drug delivery. In addition to conventional, oral, and parenteral routes, they are amenable to be delivered by ocular, transdermal, vaginal, and inhalation routes. Delivery of biotechnological products including vaccine delivery with niosomes is also an interesting and promising research area. The introduction of provesicular approach in the form of proniosomes has further increased the relevance of these systems. More concerted research efforts, however, are still required to realize the full potential of these novel systems. This review considers the current status and explores the potential of niosomes in drug delivery with special attention to their role in drug targeting. Their methods of preparation, formulation aspects, advantages, limitations, and applications are also discussed.

Bipolar tetraether archaeosomes exhibit unusual stability against autoclaving as studied by dynamic light scattering and electron microscopy

The stability of liposomes made of the polar lipid fraction E (PLFE) isolated from the thermoacidophilic archaeon Sulfolobus acidocaldarius against autoclaving has been studied by using dynamic light scattering and transmission electron microscopy. PLFE lipids have structures distinctly different from those derived from eukaryotes and prokaryotes. PLFE lipids are bipolar tetraether molecules and may contain up to four cyclopentane rings in each of the two dibiphytanyl chains. In the pH range 4-10, PLFE-based archaeosomes, with and without polyethyleneglycol- and maleimide-lipids, are able to retain vesicle size, size distribution, and morphology through at least six autoclaving cycles. The cell growth temperature (65 degrees C vs. 78 degrees C), hence the number of cyclopentane rings in the hydrocarbon chains, does not affect this general conclusion. By contrast, at the same pH range, most conventional liposomes made of monopolar diester lipids and cholesterol or pegylated lipids cannot withhold vesicle size and size distribution against just one cycle of autoclaving. At pH<4, the particle size and polydispersity of PLFE-based archaeosomes increase with autoclaving cycles, suggesting that aggregation or membrane disruption may have occurred at extreme acidic conditions during heat sterilization. Under high salt conditions, dye leakage from PLFE archaeosomes due to autoclaving is significantly less than that from pegylated liposomes composed of conventional lipids. The ability to maintain vesicle integrity after multiple autoclaving cycles indicates the potential usefulness of utilizing PLFE-based archaeosomes as autoclavable and durable drug (including genes, peptides, vaccines, siRNA) delivery vehicles.

Influence of preparation conditions and heat treatment on the properties of supercooled smectic cholesteryl myristate nanoparticles

Colloidal dispersions of cholesterol esters in the supercooled smectic state are under investigation as a novel drug carrier system in particular with respect to parenteral application. In the present study, suitable conditions for the homogenization of cholesteryl myristate dispersions stabilized with a phospholipid/bile salt blend were evaluated. For effective particle size reduction homogenization with high pressure and at temperatures above the melting temperature of the cholesterol ester (isotropic melt) is necessary. Homogenization at lower temperature where the matrix lipid is in the smectic state is less effective even when applying the highest homogenization pressure possible but still leads to dispersions with particles in the colloidal size range. Since sterility is required for parenteral medications and is usually achieved by autoclaving for aqueous systems, the physical and chemical stability of cholesteryl myristate nanoparticles stabilized with different surface active agents during heat treatment was investigated as well. The dispersions were characterized by particle size and zeta potential measurements, differential scanning calorimetry (DSC) and high performance thin layer chromatography (HPTLC). The results indicate that cholesteryl myristate nanoparticles stabilized with phospholipid/sodium glycocholate, polyvinyl alcohol, poloxamer and poloxamine can be sterilized by autoclaving. Compared to cholesterol ester free dispersions of phospholipids, the phospholipid seems to be more stable against hydrolysis during prolonged heat treatment in the phospholipid/bile salt containing cholesteryl myristate dispersions.

Physical stability of liposomes prepared from milk fat globule membrane and soya phospholipids

Previous research has shown that liposomes prepared from a milk fat globule membrane (MFGM) phospholipid fraction had a significantly higher phase transition temperature, thicker membrane, and lower membrane permeability than liposomes prepared from soya phospholipid material. Subsequent investigations into the relative stability of the two liposome dispersions have found that the MFGM phospholipid liposomes are more stable than their soya counterparts in a range of pH conditions, at a variety of storage and processing temperatures, and in the presence of mono- and divalent cations. These results illustrate some potential advantages in the use of MFGM phospholipids for the manufacture of liposomes for use in food systems.

Self-assembled drug delivery systems

Self-assembled drug delivery systems (SADDS) were designed in the paper. They can be prepared from the amphiphilic conjugates of hydrophilic drugs and lipids through self-assembling into small-scale aggregates in aqueous media. The outstanding characteristic of SADDS is that they are nearly wholly composed of amphiphilic prodrugs. The self-assembled nanoparticles (SAN) as one of SADDS had been prepared from the lipid derivative of acyclovir (SGSA) in the previous paper. They were further studied on the properties and the in vitro/in vivo behavior in this paper. The SAN kept the physical state stable upon centrifugation or some additives including some inorganic salts, alkaline solutions, surfactants and liposomes except for HCl solution, CaCl(2) solution and animal plasma. Autoclave and bath heat for sterilization hardly influenced the SAN. However, gamma-irradiation strongly destroyed the structure of SAN and SGSA was degraded. SGSA in SAN showed good stability in weak acidic or neutral buffers although it was very sensitive to alkaline solutions and carboxylester enzymes, the half-lives (t(1/2)) of which in the buffer at pH 7.4, the alkaline solution at pH 12.0, pig liver carboxylester enzyme solution, rabbit plasma, and rabbit liver tissue homogenate were 495, 21, 4.7, 25 and 8.7 h, respectively. Compared with SGSA in a disordered state, the specific bilayer structures of SAN could protect SGSA from hydrolysis through hiding the sensitive ester bonds. The SAN showed hemolytic action because the amphiphilic SGSA could insert into rabbit erythrocyte membranes. Both the high concentration of SGSA in samples and the long incubation time improved hemolysis. No hemolysis was observed if the additional volume of the SAN was less than 10% of rabbit whole blood in spite of the high concentration of SGSA. Plasma proteins could interfere the interaction between the SAN and erythrocytes by binding the SAN. The in vitro antiviral activity of acyclovir SAN was limited possibly because of the weak hydrolysis of SGSA in Vero cells, and the SAN showed a little cell toxicity possible due to the amphiphilicity of SGSA. A macrophage cell line of QXMSC1 cells showed uptake of the SAN but not significantly. The SAN were rapidly removed from blood circulation after bolus iv administration to rabbits with the very short distribution t(1/2) (1.5 min) and the elimination t(1/2) (47 min). The SAN were mainly distributed in liver, spleen and lung after iv administration, and SGSA was eliminated slowly in these tissues (t(1/2), about 7 h). It would appear that the nanosized SAN were trapped by the mononuclear phagocyte system. SADDS including SAN combine prodrugs, molecular self-assembly with nanotechnology, and hopefully become novel drug delivery approaches.

Camptothecin-catalyzed phospholipid hydrolysis in liposomes

Hydrolysis of phospholipid (PL) within camptothecin (CPT)-containing liposomes was studied systematically, after elevated lyso-phosphatidylcholine (LPC)-concentrations in pH 5, CPT-containing liposomes (22.1+/-0.9 mol%) relative to control-liposomes (7.3+/-0.5 mol%) occasionally had been observed after four months storage in fridge. Liposomes were prepared by dispersing freeze-dried PL/CPT mixtures in 25 mM phosphate buffered saline (PBS) of varying pH (5.0-7.8) and CPT concentrations (0, 3 and 6 mM). PL-hydrolysis was monitored by HPTLC, quantifying LPC. In an accelerated stability study (60 degrees C), a catalytic effect of CPT on PL-hydrolysis was observed after 40 h, but not up to 30 h of incubation. The pH profile of the hydrolysis indicated a stability optimum at pH 6.0 for the liposomes independent of CPT. The equilibrium point between the more active lactone- and the carboxylate-form of CPT was found to be pH 6.8. As a compromise, pH 6.0 was chosen, assuring >85% CPT to be present in the lactone form. At this pH, both control- and CPT-liposomes showed only minor hydrolysis after autoclaving (121 degrees C, 15 min). Storage at room temperature and in fridge (2 months), as well as accelerated ageing (70 degrees C, 25 h), gave a significant elevation of LPC content in CPT-liposomes relative to control-liposomes. This study demonstrates a catalytic effect of CPT on PL-hydrolysis, the onset of which seems to require a certain threshold level of hydrolytic degradation.

Preparation, stability, and in vitro performance of vesicles made with diblock copolymers

Vesicles made completely from diblock copolymers-polymersomes-can be stably prepared by a wide range of techniques common to liposomes. Processes such as film rehydration, sonication, and extrusion can generate many-micron giants as well as monodisperse, approximately 100 nm vesicles of PEO-PEE (polyethyleneoxide-polyethylethylene) or PEO-PBD (polyethyleneoxide-polybutadiene). These thick-walled vesicles of polymer can encapsulate macromolecules just as liposomes can but, unlike many pure liposome systems, these polymersomes exhibit no in-surface thermal transitions and a subpopulation even survive autoclaving. Suspension in blood plasma has no immediate ill-effect on vesicle stability, and neither adhesion nor stimulation of phagocytes are apparent when giant polymersomes are held in direct, protracted contact. Proliferating cells, in addition, are unaffected when cultured for an extended time with an excess of polymersomes. The effects are consistent with the steric stabilization that PEG-lipid can impart to liposomes, but the present single-component polymersomes are far more stable mechanically and are not limited by PEG-driven micellization. The results potentiate a broad new class of technologically useful, polymer-based vesicles.

Steam sterilisation of vesicular phospholipid gels

Vesicular phospholipid gels (VPGs), highly concentrated phospholipid dispersions of semisolid consistency and vesicular morphology are under investigation as potential implantable depots for sustained release of drugs and as intermediates for subsequent dilution into 'conventional' liposome dispersions. It was investigated here if VPGs can be steam sterilised. VPGs prepared from 400 mg/g egg-phosphatidylcholine by high-pressure homogenisation retained their vesicular structure but showed a slight increase in vesicle size (freeze-fracture electron microscopy). However, autoclaving slowed down both, the in vitro release of the hydrophilic marker carboxyfluorescein and vesicles from VPGs. This was assumed to be due to bigger vesicle sizes and corresponding increase in packing density of the vesicular matrix. Upon dilution into a liposome dispersion both negative staining electron microscopy and dynamic laser light scattering analysis confirmed a distinct increase in liposome size, mainly due to fusion of small (20 nm) vesicles with unfavourable curvature. This was consistent with the observed increase in encapsulation efficiency of carboxyfluorescein. Phospholipid hydrolysis during autoclaving was negligible with lysophosphatidylcholine formation of less than 2% (thin layer chromatography). Despite significant change of their morphological and functional properties during autoclaving VPGs retained their main characteristics, such as vesicular structure, sustained release and dilutability to liposome dispersions, and are, therefore, considered as autoclavable.

Archaeobacterial ether lipid liposomes (archaeosomes) as novel vaccine and drug delivery systems

Liposomes are artificial, spherical, closed vesicles consisting of one or more lipid bilayer(s). Liposomes made from ester phospholipids have been studied extensively over the last 3 decades as artificial membrane models. Considerable interest has been generated for applications of liposomes in medicine, including their use as diagnostic reagents, as carrier vehicles in vaccine formulations, or as delivery systems for drugs, genes, or cancer imaging agents. The objective of this article is to review the properties and potential applications of novel liposomes made from the membrane lipids of Archaeobacteria (Archaea). These lipids are unique and distinct from those encountered in Eukarya and Bacteria. Polar glycerolipids make up the bulk of the membrane lipids, with the remaining neutral lipids being primarily squalenes and other hydrocarbons. The polar lipids consist of regularly branched, and usually fully saturated, phytanyl chains of 20, 25, or 40 carbon length, with the 20 and 40 being most common. The phytanyl chains are attached via ether bonds to the sn-2,3 carbons of the glycerol backbone(s). It has been shown only recently that total polar lipids of archaeobacteria, and purified lipid fractions therefrom, can form liposomes. We refer to liposomes made with any lipid composition that includes ether lipids characteristic of Archaeobacteria as archaeosomes to distinguish them from vesicles made from the conventional lipids obtained from eukaryotic or eubacterial sources or their synthetic analogs. In general, archaeosomes demonstrate relatively higher stabilities to oxidative stress, high temperature, alkaline pH, action of phospholipases, bile salts, and serum proteins. Some archaeosome formulations can be sterilized by autoclaving, without problems such as fusion or aggregation of the vesicles. The uptake of archaeosomes by phagocytic cells can be up to 50-fold greater than that of conventional liposome formulations. Studies in mice have indicated that systemic administration of several test antigens entrapped within certain archaeosome compositions give humoral immune responses that are comparable to those obtained with the potent but toxic Freund's adjuvant. Archaeosome compositions can be selected to give a prolonged, sustained immune response, and the generation of a memory response. Tissue distribution studies of archaeosomes administered via various systemic and peroral routes indicate potential for targeting to specific organs. All in vitro and in vivo studies performed to date indicate that archaeosomes are safe and do not invoke any noticeable toxicity in mice. The stability, tissue distribution profiles, and adjuvant activity of archaeosome formulations indicate that they may offer a superior alternative to the use of conventional liposomes, at least for some biotechnology applications.

Toxicity of gamma irradiated liposomes. 1. In vitro interactions with blood components

Gamma irradiation is a potential technique for sterilisation of liposome suspensions. Unfortunately, gamma irradiation may result in chemical degradation of the phospholipids and the toxicological aspects have to be considered. The effects of liposome composition and gamma irradiation on the interactions of the liposomes with the hemostatic mechanisms (hemolysis, aggregation and coagulation) were studied. Non-irradiated liposome suspensions showed no hemolysis of erythrocytes. After irradiation, up to 3.1% hemolysis was measured. Least hemolysis was observed with irradiated liposomes composed of unsaturated or charged phospholipids. The negatively charged DSPG-liposomes (both non-irradiated and irradiated) induced aggregation of platelets as observed by the spectrophotometric method. However, no aggregates were seen in the microscope or measured by the aggregometer. Negatively charged liposomes also affected the coagulation cascade where prolonged coagulation times were measured. Irradiation of the liposome suspensions resulted in even longer coagulation times. The prolonged coagulation times correlated to some extent with the measured binding and depletion of calcium from plasma by the negatively charged liposomes.

Drug retention and stability of solid lipid nanoparticles containing azidothymidine palmitate after autoclaving, storage and lyophilization

Solid lipid nanoparticles (SLNs) were prepared using trilaurine (TL) as the SLN core and phospholipid (PL) as coating. Neutral and negatively charged PLs were used to produce neutral and negatively charged SLNs. An ester prodrug of 3'-azido-3'-deoxythymidine (Zidovudine, AZT), AZT palmitate (AZT-P), was synthesized and incorporated in the SLNs. The stability of SLN formulations containing AZT-P was studied at different temperatures. Drug retention and mean particle diameter of SLNs were determined after autoclaving, during temperature stability testing, and after lyophilization (with or without cryoprotective sugars) and reconstitution. There were no significant changes in the mean diameter and the zeta potential (zeta) of SLNs after autoclaving (121 degrees C for 20 min). The amount of incorporated AZT-P was, however, slightly reduced due to the formation of hydrosoluble AZT. Autoclaved SLNs were stable for a period of 10 weeks at 20 degrees C but an increase in particle size and loss of AZT-P were observed at 4 and 37 degrees C. Trehalose was an effective cryoprotectant for preventing SLN aggregation during lyophilization and subsequent reconstitution. Thermal gravimetric analysis showed that lyophilized preparations contained approximately 1% water. Using appropriate trehalose to lipid ratios, AZT-P retention in the SLNs was 100% after reconstitution. Our results demonstrate that SLNs containing AZT-P can be autoclaved, lyophilized and reconstituted without significant changes in SLN diameter and zeta potential or in the quantity of incorporated prodrug.

Heat sterilization of archaeal liposomes

Thermal stabilities were compared between liposomes prepared from the ether lipids extracted from various archaeobacteria and liposomes composed of ester lipids. Leakage of entrapped carboxyfluorescein from the liposomes exposed to 121 °C indicated a marked stability of certain ether liposomes, comparable or superior to cholesterol-stabilized liposomes prepared from the saturated synthetic lipids dimyristoyl phosphatidylcholine and dimyristoyl phosphatidylglycerol. The heat stability of diether liposomes could be increased by the inclusion of tetraether lipids.Key words: archaeal liposomes, ether liposomes, heat sterilization, thermal stability, archaeobacteria ("Archaea").

Physical (in) stability of liposomes upon chemical hydrolysis: the role of lysophospholipids and fatty acids

As a consequence of chemical hydrolysis of liposomal phospholipids the organization of the lipid assembly can change from a lamellar into a micellar system. Different approaches provided evidence for this conversion: 31P-NMR analysis, turbidity measurements and ultracentrifugation experiments. Two conditions have to be met before this conversion can take place: (1) the liposomes must pass through a gel-to-liquid crystalline phase-transition during a heating or cooling run, and (2) the degree of chemical hydrolysis must exceed a critical hydrolysis percentage (or the phospholipid bilayer must contain critical amounts of lysophospholipid and fatty acid). As monitored by turbidity measurements, this critical level of hydrolysis and the relative change depended on the chain length and on the head group of the liposomal phospholipids. It does not depend on concentration, pH, storage temperature or on size of the liposomes within the experimental range. Addition of cholesterol to bilayers composed of dipalmitoylphosphatidylcholine prevents the lamellar to micellar transformation. Fluorescence anisotropy measurements of the lipophilic probe 1,6-diphenyl-1,3,5-hexatriene in 0.18-microns dipalmitoylphosphatidylcholine/dipalmitoylphosphatidylglycerol (10:1)-liposomes indicated that behavior of the probe below and above the phase-transition temperature was not affected by chemical hydrolysis, or even by formation of micelles. However, the phase-transition temperature range broadened and shifted towards higher temperatures upon hydrolysis.