Formulation and in vitro-in vivo evaluation of buccoadhesive morphine sulfate tablets

Understanding Mucosal Physiology and Rationale of Formulation Design for Improved Mucosal Immunity

The oral and nasal cavities serve as critical gateways for infectious pathogens, with microorganisms primarily gaining entry through these routes. Our first line of defense against these invaders is the mucosal membrane, a protective barrier that shields the body's internal systems from infection while also contributing to vital functions like air and nutrient intake. One of the key features of this mucosal barrier is its ability to protect the physiological system from pathogens. Additionally, mucosal tolerance plays a crucial role in maintaining homeostasis by regulating the pH and water balance within the body. Recognizing the importance of the mucosal barrier, researchers have developed various mucosal formulations to enhance the immune response. Mucosal vaccines, for example, deliver antigens directly to mucosal tissues, triggering local immune stimulation and ultimately inducing systemic immunity. Studies have shown that lipid-based formulations such as liposomes and virosomes can effectively elicit both local and systemic immune responses. Furthermore, mucoadhesive polymeric particles, with their prolonged delivery to target sites, have demonstrated an enhanced immune response. This Review delves into the critical role of material selection and delivery approaches in optimizing mucosal immunity.

Biopolymer Substrates in Buccal Drug Delivery: Current Status and Future Trend

BACKGROUND

This paper provides a critical review of biopolymer-based substrates, especially the cellulose derivatives, for their application in buccal drug delivery. Drug delivery to the buccal mucous has the benefits of immobile muscle, abundant vascularization and rapid recovery, but not all the drugs can be administered through the buccal mucosa (e.g., macromolecular drugs), due to the low bioavailability caused by their large molecular size. This shortfall inspired the rapid development of drug-compounding technologies and the corresponding usage of biopolymer substrates.

METHODS

Cellulose derivatives have been extensively developed for drug manufacturing to facilitate its delivery. We engaged in structured research of cellulose-based drug compounding technologies. We summarized the characteristic cellulose derivatives which have been used as the biocompatible substrates in buccal delivery systems. The discussion of potential use of the rapidly-developed nanocellulose (NC) is also notable in this paper.

RESULTS

Seventy-eight papers were referenced in this perspective paper with the majority (sixty-five) published later than 2010. Forty-seven papers defined the buccal drug delivery systems and their substrates. Fifteen papers outlined the properties and applications of cellulose derivatives. Nanocellulose was introduced as a leading edge of nanomaterial with sixteen papers highlighted its adaptability in drug compounding for buccal delivery.

CONCLUSION

The findings of this perspective paper proposed the potential use of cellulose derivatives, the typical kind of biopolymers, in the buccal drug delivery system for promoting the bioavailability of macromolecular drugs. Nanocellulose (NC) in particular was proposed as an innovative bio-binder/carrier for the controlled-release of drugs in buccal system.

Encapsulation of trans-aconitic acid in mucoadhesive microspheres prolongs the anti-inflammatory effect in LPS-induced acute arthritis

trans-Aconitic acid (TAA) is the main constituent of the leaves from the medicinal plant Echinodorus grandiflorus, used to treat different inflammatory diseases. TAA induces a potent but short-lasting biological response, credited to its high polarity and unfavorable pharmacokinetics. Here we developed, characterized and evaluated the anti-inflammatory activity of mucoadhesive microspheres loaded with TAA. Seven batches of mucoadhesive microspheres were prepared by the emulsification/solvent evaporation method, employing different proportions of TAA and Carbopol 934 or/and hydroxypropylmethylcellulose. All batches were characterized for their particle medium size, polydispersity index and entrapment percentage. The batch coded F3c showed highest entrapment percentage and was characterized by infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analyses (TGA) and zeta potential. The anti-inflammatory activity of F3c was assessed in a model of acute arthritis induced by injection of LPS in the knee joint of Swiss mice. The granulometric analyses indicated heterogeneous size distribution for F3c. SEM characterization indicated microspheres with slightly irregular shape and rough surface. Results from ATR-FTIR and thermal analyses (DSC and TGA) pointed out absence of incompatibility between the components of the formulation; thermal events related to the constituents were isolated and randomly located, suggesting amorphous distribution of TAA in the formulation matrix. The zeta potential of the formulations varied from -30 to -34 mV, which may contribute to good stability. When given orally to mice, F3c induced a prolonged anti-inflammatory response by reducing total cell count and neutrophilic accumulation in the joint cavity even when given 48 and 36 h before the stimulus, respectively, in comparison to free TAA (up to 24 and 6 h, respectively). Therefore, the encapsulation of TAA in mucoadhesive microspheres provided its sustained release, indicating that this drug delivery system is a potential agent to treat inflammatory diseases by regulating cell influx.

Effect of polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer on bioadhesion and release rate property of eplerenone pellets

The present study involved the design and development of oral bioadhesive pellets of eplerenone. A solid dispersion of eplerenone was developed with a hydrophilic carrier, polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus^®). Bioadhesive pellets were prepared from this solid dispersion using a combination of HPMC K4M and Carbopol 934P. Both the solid dispersion and the pellets were evaluated for various physicochemical properties such as solubility, entrapment efficiency, drug content, surface morphology, mucoadhesion and swelling behavior. Analysis carried out using FT-IR, DSC and XRD found no interaction between the eplerenone and excipients. The solid dispersion had irregular-shaped smooth-surfaced particles of diameter 265 ± 105.5 μm. In TEM analysis, eplerenone particles of size 79-120 nm were found. The solubility and dissolution of eplerenone in the Soluplus^®-based solid dispersion were 5.26 and 2.50 times greater, respectively. Investigation of the swelling behavior of the pellets showed that the thickness of the gel layer increased continuously over the duration of the study. Moreover, a correlation was observed between the thickness and strength of the gel layer and the percentage release. The mechanism of drug release was found to be non-Fickian (anomalous), with the release kinetics approaching first-order kinetics. The bioavailability of the eplerenone bioadhesive pellet formulation was studied using Wistar rats and was found to be improved. An in vivo mucoadhesion study showed that the pellets are retained for 24 h in rabbits. It was concluded that Soluplus^® had a positive effect on the solubility and dissolution of pellets without affecting the bioadhesion.

Provesicular granisetron hydrochloride buccal formulations: in vitro evaluation and preliminary investigation of in vivo performance

Granisetron hydrochloride (granisetron) is a potent antiemetic that has been proven to be effective in acute and delayed emesis in cancer chemotherapy. Granisetron suffers from reduced oral bioavailability (≈60%) due to hepatic metabolism. In this study the combined advantage of provesicular carriers and buccal drug delivery has been explored aiming to sustain effect and improve bioavailability of granisetron via development of granisetron provesicular buccoadhesive tablets with suitable quality characteristics (hardness, drug content, in vitro release pattern, exvivo bioadhesion and in vivo bioadhesion behavior). Composition of the reconstituted niosomes from different prepared provesicular carriers regarding type of surfactant used and cholesterol concentration significantly affected both entrapment efficiency (%EE) and vesicle size. Span 80 proniosome-derived niosomes exhibited higher encapsulation efficiency and smaller particle size than those derived from span 20. Also, the effect of %EE and bioadhesive polymer type on in vitro drug release and in vivo performance of buccoadhesive tablets was investigated. Based on achievement of required in vitro release pattern (20-30% at 2h, 40-65% at 6h and 80-95% at 12h), in vivo swelling behavior, and in vivo adhesion time (>14 h) granisetron formulation (F19, 1.4 mg) comprising HPMC:carbopol 974P (7:3) and maltodextrin coated with the vesicular precursors span 80 and cholesterol (9:1) was chosen for in vivo study. In vivo pharmacokinetic study revealed higher bioavailability of buccal formulation relative to conventional oral formulation of granisetron (AUC0-∞ is 89.97 and 38.18 ng h/ml for buccal and oral formulation, respectively). A significantly lower and delayed Cmax (12.09±4.47 ng/ml, at 8h) was observed after buccal application compared to conventional oral tablet (31.66±10.15 ng/ml, at 0.5 h). The prepared provesicular buccoadhesive tablet of granisetron (F19) might help bypass hepatic first-pass metabolism and improve bioavailability of granisetron with the possibility of reducing reported daily dose (2mg) and reducing dosing frequency.

Hydrogen-bonded complexes and blends of poly(acrylic acid) and methylcellulose: nanoparticles and mucoadhesive films for ocular delivery of riboflavin

Poly(acrylic acid) (PAA) and methylcellulose (MC) are able to form hydrogen-bonded interpolymer complexes (IPCs) in aqueous solutions. In this study, the complexation between PAA and MC is explored in dilute aqueous solutions under acidic conditions. The formation of stable nanoparticles is established, whose size and colloidal stability are greatly dependent on solution pH and polymers ratio in the mixture. Poly(acrylic acid) and methylcellulose are also used to prepare polymeric films by casting from aqueous solutions. It is established that uniform films can be prepared by casting from polymer mixture solutions at pH 3.4-4.5. At lower pHs (pH < 3.0) the films have inhomogeneous morphology resulting from strong interpolymer complexation and precipitation of polycomplexes, whereas at higher pHs (pH 8.3) the polymers form fully immiscible blends because of the lack of interpolymer hydrogen-bonding. The PAA/MC films cast at pH 4 are shown to be non-irritant to mucosal surfaces. These films provide a platform for ocular formulation of riboflavin, a drug used for corneal cross-linking in the treatment of keratoconus. An in vitro release of riboflavin as well as an in vivo retention of the films on corneal surfaces can be controlled by adjusting PAA/MC ratio in the formulations.

Cyclodextrin-crosslinked poly(acrylic acid): adhesion and controlled release of diflunisal and fluconazole from solid dosage forms

The controlled release of diflunisal and fluconazole from tablets made of novel polymers, poly(acrylic acid) (PAA) crosslinked with either β-cyclodextrin (βCD) or hydroxypropyl-βCD (HPβCD), was investigated and Carbopol 934P (Carbopol) was used as a highly crosslinked PAA for comparison. Diflunisal strongly associates with βCD-PAA and HPβCD-PAA polymers (Ka of 486 and 6,055 M(-1) respectively); thus, it was physically mixed into the conjugates and also precomplexed to identify whether decomplexation has any influence on release kinetics. Fluconazole has poor complexing ability (Ka of 34 M(-1) with HPβCD-PAA); thus, it was only tested as a physical mixture. Swelling and adhesion studies were conducted on all tablet combinations and adhesivity of the CD-PAA polymer tablets was maintained. Diflunisal release was much slower from HPβCD-PAA tablets than from βCD-PAA, suggesting that a higher degree of complexation retards release. The precomplexed diflunisal release was also slower than the physically mixed diflunisal of the corresponding conjugate. The release closely followed zero-order kinetics for HPβCD-PAA, but was more sigmoidal for βCD-PAA and especially Carbopol. Conversely, poorly associating fluconazole released in almost exactly the same way across both polymers and Carbopol, indicating that the release kinetics of poorly associating drugs are not influenced by the presence of cyclodextrins. In view of the varying profiles and release rates shown with diflunisal for the different polymers, the fluconazole data support the concept that adequate complexation can indeed modulate the release kinetics of drugs.

New developments and opportunities in oral mucosal drug delivery for local and systemic disease

The oral mucosa's accessibility, excellent blood supply, by-pass of hepatic first-pass metabolism, rapid repair and permeability profile make it an attractive site for local and systemic drug delivery. Technological advances in mucoadhesives, sustained drug release, permeability enhancers and drug delivery vectors are increasing the efficient delivery of drugs to treat oral and systemic diseases. When treating oral diseases, these advances result in enhanced therapeutic efficacy, reduced drug wastage and the prospect of using biological agents such as genes, peptides and antibodies. These technologies are also increasing the repertoire of drugs that can be delivered across the oral mucosa to treat systemic diseases. Trans-mucosal delivery is now a favoured route for non-parenteral administration of emergency drugs and agents where a rapid onset of action is required. Furthermore, advances in drug delivery technology are bringing forward the likelihood of transmucosal systemic delivery of biological agents.

Development of Buccal Adhesive Tablet with Prolonged Antifungal activity: Optimization and ex vivo Deposition Studies

The purpose of the present work was to prepare buccal adhesive tablets of miconazole nitrate. The simplex centroid experimental design was used to arrive at optimum ratio of carbopol 934P, hydroxypropylmethylcellulose K4M and polyvinylpyrollidone, which will provide desired drug release and mucoadhesion. Swelling index, mucoadhesive strength and in vitro drug release of the prepared tablet was determined. The drug release and bioadhesion was dependent on type and relative amounts of the polymers. The optimized combination was subjected to in vitro antifungal activity, transmucosal permeation, drug deposition in mucosa, residence time and bioadhesion studies. IR spectroscopy was used to investigate any interaction between drug and excipients. Dissolution of miconazole from tablets was sustained for 6 h. based on the results obtained, it can be concluded that the prepared slow release buccoadhesive tablets of miconazole would markedly prolong the duration of antifungal activity. Comparison of in vitro antifungal activity of tablet with marketed gel showed that drug concentrations above the minimum inhibitory concentration were achieved immediately from both formulations but release from tablet was sustained up to 6 h, while the gel showed initially fast drug release, which did not sustain later. Drug permeation across buccal mucosa was minimum from the tablet as well as marketed gel; the deposition of drug in mucosa was higher in case of tablet. In vitro residence time and bioadhesive strength of tablet was higher than gel. Thus the buccoadhesive tablet of miconazole nitrate may offer better control of antifungal activity as compared to the gel formulation.

Polyelectrolyte Complexes: A Review of their Applicability in Drug Delivery Technology

Over the past several years, great advances have been made towards novel drug delivery systems. The phenomena of interpolymer interactions and formation of polyelectrolyte complexes have been the focus of intensive fundamental and applied research. Interpolyelectrolyte complexes combine unique physicochemical properties with high biocompatibility. Studies have been carried out on many different polymer blends and types. Such combinations may possess unique properties that are different from those of individual component. The present review emphasizes on the applicability of polyelectrolyte complexes in drug delivery technology.

Efficacy of topical benzydamine hydrochloride gel on oral mucosal ulcers: an in vivo animal study

The aim of this study was to investigate the effect of benzydamine hydrochloride bioadhesive gel on healing of oral mucosal ulceration in an animal model. For in vivo determination of the effects of the bioadhesive gel, 36 rabbits were separated into three groups: the first group was treated with the gel formulation without active agent, the second group with the gel formulation containing benzydamine, and the third group received no treatment. Clinical healing was established by measuring the area of the ulcer in each test group on days 3, 6, 9 and 12. Histological healing was determined on the same days. Benzydamine containing gel applications resulted in a decrease in the ulcer area in 12 days (p=0.000). Histological evaluation showed that the benzydamine group had a higher mean histological score than the base and the control groups during the whole test period, and the difference between the benzydamine group and the control group was significant (p=0.04). The bioadhesive gel formulation of benzydamine hydrochloride showed a statistically significant increased rate of mucosal repair in this experimental standard mucosal wound animal study. It is a candidate for the topical treatment of oral mucosal ulcerative lesions.

Porcine buccal mucosa as in vitro model: effect of biological and experimental variables

Porcine buccal mucosa has been used as an in vitro model to assess the potential of delivering a molecule via the transbuccal route. However, permeation studies across porcine buccal mucosa show high variability due to various experimental and biological factors. The variability associated with the use of different mucosal regions, tissue storage conditions and tissue processing methods on drug permeation was investigated in this study. The permeability of model diffusants was significantly higher in the region behind the lip when compared to the cheek region because the latter has a thicker epithelium. Porcine buccal mucosa retained its integrity in Kreb's bicarbonate ringer solution at 4 degrees C for 24 h while many other storage conditions resulted in loss of epithelial integrity. Separation of the epithelium from underlying connective tissue either surgically or by heat treatment resulted in an epithelial thickness of approximately 150 microm. Separation of epithelium from the underlying connective tissue by heat treatment did not adversely affect its permeability and integrity characteristics. Investigation of these important biological and experimental variables provides guidance for conducting in vitro transbuccal permeation studies.

Polymers for mucoadhesive drug delivery system: a current status

To overcome the relatively short gastrointestinal (GI) time and improve localization for oral controlled or sustained release drug delivery systems, bioadhesive polymers that adhere to the mucin/epithelial surface are effective and lead to significant improvement in oral drug delivery. Improvements are also expected for other mucus-covered sites of drug administration. Bioadhesive polymers find application in the eye, nose, and vaginal cavity as well as in the GI tract, including the buccal cavity and rectum. This article lays emphasis mainly on mucoadhesive polymers, their properties, and their applications in buccal, ocular, nasal, and vaginal drug delivery systems with its evaluation methods.

Chemical stability and bioadhesive properties of an ester prodrug of Delta 9-tetrahydrocannabinol in poly(ethylene oxide) matrices: effect of formulation additives

The objective of the present research was to stabilize a novel hemiglutarate ester prodrug of Delta(9)-tetrahydrocannabinol (THC), in polyethylene oxide (PEO) polymeric matrices produced by hot-melt fabrication, for systemic delivery of THC through the oral transmucosal route. For this purpose, the influence of pH modifiers and antioxidants employed as stabilizing agents in these matrices was investigated. Based on the stability studies, two final formulations were made, and the stability of the active was assessed in these systems. In addition, the bioadhesive properties of PEO matrices were studied as a function of bioadhesive polymer type and concentration, contact time, drug loading and wetting time. Of all of the polymers investigated, bioadhesion was highest with Carbopol 971p. Bioadhesion increased with bioadhesive polymer concentration and wetting time to a certain level beyond which there was no further contribution. Both the contact time and drug loading influenced the bioadhesion. Severe degradation of the prodrug was observed during storage, even at room temperature (75% at the end of 3 months). Incorporation of the stabilizing agents in the PEO matrices reduced the degradation of the prodrug considerably. Citric acid was the most effective of all of the pH modifiers studied. Among the various antioxidants utilized, degradation was observed least in presence of BHT and ascorbic acid. Only 7.6% and 8.2% of prodrug degraded in these matrices, respectively, as compared to the PEO-only matrices (59.4%) at the end of 3 months at 25 degrees C/60% RH. The prodrug was very stable in both of the final formulations at the end of the 3 months at 40 degrees C/75% RH.

An Examination of the Rheological and Mucoadhesive Properties of Poly(Acrylic Acid) Organogels Designed as Platforms for Local Drug Delivery to the Oral Cavity

This study examined the rheological/mucoadhesive properties of poly(acrylic acid) PAA organogels as platforms for drug delivery to the oral cavity. Organogels were prepared using PAA (3%, 5%, 10% w/w) dissolved in ethylene glycol (EG), propylene glycol (PG), 1,3-propylene glycol (1,3-PG), 1,5-propanediol (1,5-PD), polyethylene glycol 400 (PEG 400), or glycerol. All organogels exhibited pseudoplastic flow. The increase in storage (G') and loss (G'') moduli of organogels as a function of frequency was minimal, G'' was greater than G'' (at all frequencies), and the loss tangent <1, indicative of gel behavior. Organogels prepared using EG, PG, and 1,3-propanediol (1,3-PD) exhibited similar flow/viscoelastic properties. Enhanced rheological structuring was associated with organogels prepared using glycerol (in particular) and PEG 400 due to their interaction with adjacent carboxylic acid groups on each chain and on adjacent chains. All organogels (with the exception of 1,5-PD) exhibited greater network structure than aqueous PAA gels. Organogel mucoadhesion increased with polymer concentration. Greatest mucoadhesion was associated with glycerol-based formulations, whereas aqueous PAA gels exhibited the lowest mucoadhesion. The enhanced network structure and the excellent mucoadhesive properties of these organogels, both of which may be engineered through choice of polymer concentration/solvent type, may be clinically useful for the delivery of drugs to the oral cavity.

Polyelectrolyte complexes of Eudragit l30 d-55 and gelatin: antinociceptive activity of entrapped piroxicam

The electrostatic interaction between oppositely charged polyelectrolytes leads to the formation of polyelectrolyte complexes, which are of considerable interest because of their potential applications as both drug carriers or surface modifying agents. In this study, in vitro and in vivo studies were carried out on polyelectolyte complexes formulated with Eudragit L30 D-55 and gelatin. The complexes of Eudragit L30 D-55 and gelatin were formulated by nonstoichiometric method. The polyelectrolyte complexes formulated were then granulated and evaluated by percentage yield, particle size, and swelling behavior. The pharmacodynamic effects of piroxicam entrapped in the complexes were determined using healthy rats. Results showed that gelatin and Eudragit L30 D-55 formed polyelectrolyte complexes that prolonged the antinociceptive effects of piroxicam in experimental rats. The performance of the polyelectrolyte complexes could be stated in the following descending rank order: 1:1 > 2:1 > 1:2 ratios of Eudragit L30 D-55 and gelatin. Nonstoichiometric interactions of gelatin and Eudragit L30 D-55 could yield matrices with adequate characteristics for the formulation of sustained release systems of drugs.

Buccal bioadhesive drug delivery--a promising option for orally less efficient drugs

Rapid developments in the field of molecular biology and gene technology resulted in generation of many macromolecular drugs including peptides, proteins, polysaccharides and nucleic acids in great number possessing superior pharmacological efficacy with site specificity and devoid of untoward and toxic effects. However, the main impediment for the oral delivery of these drugs as potential therapeutic agents is their extensive presystemic metabolism, instability in acidic environment resulting into inadequate and erratic oral absorption. Parenteral route of administration is the only established route that overcomes all these drawbacks associated with these orally less/inefficient drugs. But, these formulations are costly, have least patient compliance, require repeated administration, in addition to the other hazardous effects associated with this route. Over the last few decades' pharmaceutical scientists throughout the world are trying to explore transdermal and transmucosal routes as an alternative to injections. Among the various transmucosal sites available, mucosa of the buccal cavity was found to be the most convenient and easily accessible site for the delivery of therapeutic agents for both local and systemic delivery as retentive dosage forms, because it has expanse of smooth muscle which is relatively immobile, abundant vascularization, rapid recovery time after exposure to stress and the near absence of langerhans cells. Direct access to the systemic circulation through the internal jugular vein bypasses drugs from the hepatic first pass metabolism leading to high bioavailability. Further, these dosage forms are self-administrable, cheap and have superior patient compliance. Developing a dosage form with the optimum pharmacokinetics is a promising area for continued research as it is enormously important and intellectually challenging. With the right dosage form design, local environment of the mucosa can be controlled and manipulated in order to optimize the rate of drug dissolution and permeation. A rational approach to dosage form design requires a complete understanding of the physicochemical and biopharmaceutical properties of the drug and excipients. Advances in experimental and computational methodologies will be helpful in shortening the processing time from formulation design to clinical use. This paper aims to review the developments in the buccal adhesive drug delivery systems to provide basic principles to the young scientists, which will be useful to circumvent the difficulties associated with the formulation design.

Design and evaluation in vitro of controlled release mucoadhesive tablets containing chlorhexidine

This investigation deals with the development of buccal tablets containing chlorhexidine (CHX), a bis-bis-guanide with antimicrobial and antiseptic effects in the oral cavity, and able to adhere to the buccal mucosa to give local controlled release of drug. A mucoadhesive formulation was designed to swell and form a gel adhering to the mucosa and controlling the drug release into the oral cavity. Some batches of tablets were developed by direct compression, containing different amounts of hydroxypropylmethylcellulose (HPMC) and carbomer; changing the amount ratio of these excipients in formulations, it is possible easily modulate the mucoadhesive effect and release of drug. The in vitro tests were performed using the USP 26/NF paddle apparatus, a specifically developed apparatus, and a modified Franz diffusion cells apparatus. This last method allows a simultaneous study of drug release rate from the tablets and drug permeation through the buccal mucosa. Similar tests have also been carried out on a commercial product, Corsodyl gel, in order to compare the drug release control of gel with respect to that of the mucoadhesive tablet, as a formulation for buccal delivery of CHX. While the commercial formulation does not appear to control the release, the formulation containing 15% w/w methocel behaves the best, ensuring the most rapid and complete release of the drug, together with a negligible absorption of the active agent as required for a local antiseptic action in the oral cavity.

Temperature stability and bioadhesive properties of delta9-tetrahydrocannabinol incorporated hydroxypropylcellulose polymer matrix systems

The purpose of this study was to determine and compare the bioadhesive profiles of hydroxypropylcellulose (HPC) polymer matrices as a function of delta9-tetrahydrocannabinol (THC) content. In addition, the effect of processing temperature on the stability of THC and its extent of degradation to cannabinol (CBN) was investigated. A hot-melt cast molding method was used to prepare HPC polymer matrix systems incorporated with THC at 0, 4, 8, and 16 percent. Bioadhesive measurements including peak adhesive force, area under the curve, and elongation at adhesive failure were recorded utilizing the TA.XT2i Texture Analyzer. Data obtained from these tests at various contact time intervals suggested that the incorporation of THC led to an increase in the bioadhesive strength of the HPC polymer matrices. To determine the stability of THC and the resulting CBN content in the matrices, three different processing temperatures were utilized (120, 160, and 200 degrees C). Post-production High Performance Liquid Chromotography (HPLC) analysis revealed that the processed systems contained at least 94% of THC and the relative percent formation of CBN was 0.5% at 120 degrees C and 0.4% at 160 degrees C compared to 1.6% at 200 degrees C. These findings indicate that the cannabinoid may be a plausible candidate for incorporation into systems utilizing hot-melt extrusion techniques for the development of an effective mucoadhesive transmucosal matrix system for delivery of THC.

Modulation of the rheological and mucoadhesive properties of thermosensitive poloxamer-based hydrogels intended for the rectal administration of quinine

The aim of this work was to formulate and characterize thermosensitive gels based on poloxamer 407, a thermosensitive polymer, and hydroxypropylmethylcellulose (HPMC), a bioadhesive polymer, intended for the rectal delivery of quinine in children. In order to avoid the macroscopic phase separation between the two polymers it was necessary to add propanediol-1,2. After the formulation of stable ternary systems, their rheological properties were studied as a function of temperature. It was thus possible to obtained the gelation temperature of the systems as well as their elastic modulus, G', at 37 degrees C. It appeared that HPMC in the presence of propanediol-1,2 had a synergistic effect on the gelation of poloxamer 407. Tests on the rabbit rectal mucous membrane, founded on a technique of traction of the adhesive/adhered joint, made it possible to characterize the bioadhesive properties of the gels by measuring the work of adhesion, W, and the maximum detachment force, F(max). Over small concentration ranges of poloxamer and HPMC, very important variations of the viscoelastic and mucoadhesives properties were observed. It was shown that the viscoelastic and the bioadhesive properties were tightly correlated. Indeed, an empirical equivalence relation was established between the shear frequency and the rate of deformation in traction and allowed to describe all our samples by a master curve. This master curve would make it possible to predict the values of W at various rates of traction by the simple non-destructive measurement of the elastic modulus, G', at an equivalent shear frequency.

Pharmaceutical applications of mucoadhesion for the non-oral routes

The adhesion of pharmaceutical formulations to the mucosal tissue offers the possibility of creating an intimate and prolonged contact at the site of administration. This prolonged residence time can result in enhanced absorption and, in combination with a controlled release of the drug, also improved patient compliance by reducing the frequency of administration. During the almost 30 years over which mucoadhesion has been studied, a considerable amount of knowledge has been gained, and much has been learned about the different mechanisms occurring at the formulation-mucus interface and the properties that affect these mechanisms. The in-vivo performance of a dosage form not only depends on the mechanisms occurring at the interface, but also on the properties of the total mucoadhesive complex: the dosage form, the mucosa and the interface between them. A wide variety of methods are used for studying mucoadhesion; some rather similar to the in-vivo situation and some mimicking the interface alone. In this review, the mucus surface, the methods used for the study of mucoadhesion, the different mechanisms involved in mucoadhesion and theories underpinning them have been described. The complexity of mucoadhesion when trying to systemize the subject will also be discussed. The last part of the review describes the buccal, nasal, ocular, vaginal and rectal routes and provides examples of what can be achieved in-vivo when using mucoadhesive formulations.

Double-layered mucoadhesive tablets containing nystatin

The objective of this work was to design a mucoadhesive tablet with a potential use in the treatment of oral candidosis. A 2-layered tablet containing nystatin was formulated. Lactose CD (direct compression), carbomer (CB), and hydroxypropylmethylcellulose (HPMC) were used as excipients. Tablets were obtained through direct compression. Properties such as in vitro mucoadhesion, water uptake, front movements, and drug release were evaluated. The immediate release layer was made of lactose CD (100 mg) and nystatin (30 mg). The CB:HPMC 9:1 mixture showed the best mucoadhesion properties and was selected as excipient for the mucoadhesive polymeric layer (200 mg). The incorporation of nystatin (33.3 mg) in this layer affected the water uptake, which, in turn, modified the erosion front behavior. Nystatin showed a first-order release. The polymeric layer presented an anomalous kinetic (n = 0.82) when this layer was individually evaluated. The mucoadhesive tablet formulated in this work releases nystatin quickly from the lactose layer and then in a sustained way, during approximately 6 hours, from the polymeric layer. The mixture CB:HPMC 9:1 showed good in vitro mucoadhesion. A swelling-diffusion process modulates the release of nystatin from this layer. A non-Fickian (anomalous) kinetic was observed.

Effect of HPMC and Carbopol on the release and floating properties of Gastric Floating Drug Delivery System using factorial design

The purpose of this study is to investigate the effect of formulation variables on drug release and floating properties of the delivery system. Hydroxypropyl methylcellulose (HPMC) of different viscosity grades and Carbopol 934P (CP934) were used in formulating the Gastric Floating Drug Delivery System (GFDDS) employing 2 x 3 full factorial design. Main effects and interaction terms of the formulation variables could be evaluated quantitatively by a mathematical model. It was found that both HPMC viscosity, the presence of Carbopol and their interaction had significant impact on the release and floating properties of the delivery system. The decrease in the release rate was observed with an increase in the viscosity of the polymeric system. Polymer with lower viscosity (HPMC K100LV) was shown to be beneficial than higher viscosity polymer (K4M) in improving the floating properties of GFDDS. Incorporation of Carbopol, however, was found to compromise the floating capacity of GFDDS and release rate of calcium. The observed difference in the drug release and the floating properties of GFDDS could be attributed to the difference in the basic properties of three polymers (HPMC K4M, K100LV and CP934) due to their water uptake potential and functional group substitution.

Double-layered mucoadhesive tablets containing nystatin

The objective of this work was to design a mucoadhesive tablet with a potential use in the treatment of oral candidosis. A 2-layered tablet containing nystatin was formulated. Lactose CD (direct compression), carbomer (CB), and hydroxypropylmethylcellulose (HPMC) were used as excipients. Tablets were obtained through direct compression. Properties such as in vitro mucoadhesion, water uptake, front movements, and drug release were evaluated. The immediate release layer was made of lactose CD (100 mg) and nystatin (30 mg). The CB:HPMC 9:1 mixture showed the best mucoadhesion properties and was selected as excipient for the mucoadhesive polymeric layer (200 mg). The incorporation of nystatin (33.3 mg) in this layer affected the water uptake, which, in turn, modified the erosion front behavior. Nystatin showed a first-order release. The polymeric layer presented an anomalous kinetic (n = 0.82) when this layer was individually evaluated. The mucoadhesive tablet formulated in this work releases nystatin quickly from the lactose layer and then in a sustained way, during approximately 6 hours, from the polymeric layer. The mixture CB:HPMC 9:1 showed good in vitro mucoadhesion. A swelling-diffusion process modulates the release of nystatin from this layer. A non-Fickian (anomalous) kinetic was observed.

Effect of formulation variables on the floating properties of gastric floating drug delivery system

PURPOSE

To evaluate the contribution of formulation variables on the floating properties of a gastric floating drug delivery system (GFDDS) using a continuous floating monitoring system and statistical experimental design.

METHODS

A modified continuous floating monitoring system, which consisted of an electric balance interfacing with a PC, was designed to perform the continuous monitoring of floating kinetics of GFDDS. Several formulation variables, such as different types of hydroxypropyl methylcellulose (HPMC), varying HPMC/Carbopol ratio, and addition of magnesium stearate, were evaluated using Taguchi design, and the effects of these variables were subjected to statistical analysis.

RESULTS

The continuous floating monitoring system developed was validated, using capsules with different density, and a good correlation between theoretical and experimental values was obtained (R2 = 0.9998), indicating the validity of the setup. The statistical analysis indicated that magnesium stearate had a significant effect on the floating property of GFDDS (p < 0.05), and addition of magnesium stearate could significantly improve the floating capacity of the GFDDS. It was found that the HPMC of higher viscosity grade generally exhibited a greater floating capacity, but the effect was not statistically significant. For polymers with the same viscosity, i.e., K4M and E4M, the degree of substitution of the function group did not show any significant contribution. A better floating behavior was achieved at higher HPMC/Carbopol ratio. Carbopol appeared to have a negative effect on the floating behavior of GFDDS.

CONCLUSIONS

It was concluded that by using a validated continuous floating monitoring system, the effect of formulation variables on the floating property of the delivery system and their ranges could be identified. Incorporation of hydrophobic agents, such as magnesium stearate, could significantly improve the floating capacity of the GFDDS.

Effect of Carbopol and polyvinylpyrrolidone on the mechanical, rheological, and release properties of bioadhesive polyethylene glycol gels

This study examined the mechanical (hardness, compressibility, adhesiveness, and cohesiveness) and rheological (zero-rate viscosity and thixotropy) properties of polyethylene glycol (PEG) gels that contain different ratios of Carbopol 934P (CP) and polyvinylpyrrolidone K90 (PVP). Mechanical properties were examined using a texture analyzer (TA-XT2), and rheological properties were examined using a rheometer (Rheomat 115A). In addition, lidocaine release from gels was evaluated using a release apparatus simulating the buccal condition. The results indicated that an increase in CP concentration significantly increased gel compressibility, hardness, and adhesiveness, factors that affect ease of gel removal from container, ease of gel application onto mucosal membrane, and gel bioadhesion. However, CP concentration was negatively correlated with gel cohesiveness, a factor representing structural reformation. In contrast, PVP concentration was negatively correlated with gel hardness and compressibility, but positively correlated with gel cohesiveness. All PEG gels exhibited pseudoplastic flow with thixotropy, indicating a general loss of consistency with increased shearing stress. Drug release T50% was affected by the flow rate of the simulated saliva solution. A reduction in the flow rate caused a slower drug release and hence a higher T50% value. In addition, drug release was significantly reduced as the concentrations of CP and PVP increased because of the increase in zero-rate viscosity of the gels. Response surfaces and contour plots of the dependent variables further substantiated that various combinations of CP and PVP in the PEG gels offered a wide range of mechanical, rheological, and drug-release characteristics. A combination of CP and PVP with complementary physical properties resulted in a prolonged buccal drug delivery.

Solid-state stability assessment of controlled release tablets containing Carbopol 971P

A tablet formulation containing dyphylline, Carbomer, magnesium stearate, talc and lactose was prepared by the direct compression method. The objective of the study was to assess the stability of these tablets after subjecting them to exaggerated conditions of temperature (4, 25, 37, 45 and 55 degrees C) and humidity (37 degrees/11%RH, 37 degrees/51%RH and 37 degrees C/91%RH). The samples were analyzed for crystalline, thermal and dissolution changes with time for a period of 12 months using X-ray diffractometry (XRD), differential scanning calorimetry (DSC) and U.S.P. Dissolution Apparatus 2. Moisture sorption studies of all tablets indicated sorption of large amounts of moisture at 37 degrees C/91%RH. The fit factors, f1 andf2, were calculated and used to compare the dissolution profiles. The results showed increased f1 and decreased f2 values at higher humidity, while the samples were fairly stable at lower humidity and at all temperatures studied. Powder XRD patterns of tablets showed a change in crystallinity at higher humidity. The thermal and crystalline data indicated that the change in dissolution behavior at higher humidity may be due to the conversion of dyphylline to its hydrate form.